design engineer - Contract Employment Weekly

Transcription

A R E Y O U U N E M P L OY E D ?
Contract Employment
Show the staffing firms you are
ready for work with your FREE
LISTING on the Hot Sheet of
Available Contract Personnel.
®
www.cjhunter.com
Submit your listing at
cjhunter.com
See you on the Hot Sheet!
We’re headed into
the 4th quarter ...
make the right call
and don’t miss out!
$outheast Ramp with Huge Bonus Opportunity!!!
Don’t miss out on the below positions, apply TODAY!
$$ Introducing our NEW 2013 Southeast Bonus Program
available through VOLT! $$
Celebrate the New Year with a $500 end of year bonus! *
Commit and stay on board for 6 months and get $1000 additional bonus! *
After 1960 hours including OT, receive a 2% bonus on all straight time hours!!!
*For qualifying aerospace positions now through the end of 2013
at the world’s leader in regional aircraft manufacturing located in the Southeast
All other standard VOLT employee benefits apply
Positions include: Stress Engineers, Structural Design Engineers,
Mechanical Designers, Electrical Wire Design Engineers,
Flight and Dynamic Engineers, Doors Design,
Electro-Mechanical Systems Engineering, Hydraulic Design,
Flight Controls/Fly-by-Wire and Final Phase Design Engineers!
BE ON THE RECEIVING END OF THIS GREAT OPPORTUNITY
AND CALL VOLT TODAY!!
888-307-4243 / 877-861-8347
Email - [email protected]
Seattle Aerospace Recruitment Delivery Center - [email protected] • 888.307.4243
Phoenix Aerospace Recruitment Delivery Center - [email protected] • 877.861.8347
Ft. Worth - [email protected] • 877.491.3882
National Recruiting-Orange, CA - [email protected] • 866.465.7614
FIRST-CLASS MAIL
San Diego - [email protected] • 858.279.5801
Wichita - [email protected] • 877.711.2300
Phoenix - [email protected] • 888.655.8658
published by: C.E. Publications, Inc., P.O. Box 3006, Bothell, WA 98041-3006
Phone: 425/806-5200 • Fax: 425/806-5585 • Email: [email protected]
SEPTEMBER 11, 2013 • VOLUME 45, NO. 28 • $4.00
2 – September 11, 2013 C.E. Weekly
* See page column refers to the page number of a display ad with possible further information regarding the job openings and/or related requirements. Where Index is used, there is no display ad
for that listing. The address and phone number of the firm with that job can, therefore, be found in the Index of Contract Firms in the back of each C.E. Weekly. The following feature of C.E. Weekly
categorizes job openings by discipline. Please keep in mind that JobLines represent just a portion of the total number of openings published in this issue. There are many jobs appearing in display
ads, which do not appear in JobLines.
$$$$ JobLines $$$$
Job Classification, Description
Assignment
Location
Contract Firm/
Office to Contact
Rate
Per
Diem
Overtime?
Expected Expected * See
Duration Start Date Page
Montreal, Canada TDM/Toronto
80/hr
75/hr
75/hr
poss
poss
poss
poss
poss
poss
12 mos+
12 mos+
12 mos+
ASAP
ASAP
ASAP
A-1
A-1
A-1
Belvidere, IL
Rockford, IL
Rockford, IL
Rockford, IL
Rockford, IL
Rockford, IL
Tulsa, OK
Atlanta, GA
Vero Beach, FL
Jacksonville, FL
Portland, OR
Everett, WA
Vero Beach, FL
Wichita, KS
open
open
open
open
open
open
24.41/hr
DOE
DOE
DOE
DOE
DOE
DOE
DOE
yes
split
split
split
split
split
split
poss
poss
no
poss
poss
poss
poss
poss
poss
poss
poss
poss
poss
yes
poss
poss
poss
no
poss
poss
poss
ST
6 mos
6 mos
6 mos+
6 mos+
6-9 mos
2 mos
6 mos
LT
direct
1 year+
contr-dir
6 mos
—
—
ASAP
ASAP
ASAP
Now
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
FOREIGN ASSIGNMENTS:
Fuel Systems Engineer
High Lift Engineer
System Stress Engineer
DOMESTIC ASSIGNMENTS:
Aerospace Desktop Simulation Engineer—EXEPS
Aerospace Qualification Test Engineer
Aerospace Requirements Development Engineer—EPGS/SPDA
Aerospace Systems Test Engineer—electric power system
Aerospace Systems Test V&V Engineer
Aerospace Systems/Software Requirements Engineer
Aircraft Assemblers
Aircraft Avionics Engineers—717 modifications
Aircraft Flight Test Engineer—FAA/EASA regs
Aircraft Interior Project Manager
Automotive Test Engineer
Aviation Electrical Design Engineer—SRMs/MMs/IPCs
Aviation Instrumentation Technician—pressure sensors
Aviation Project Coordinator—forecasting/EVMS
Powernetics/Belvidere
Foster/Wichita
STS Engrg/Jensen Beach
Olsa Resources/Portland
C.E. Weekly September 11, 2013 – A-1
Assignment
Location
Contract Firm/
Office to Contact
Rate
Per
Diem
Overtime
Expected
Duration
Expected * See
Start Date Page
Aviation Static Stress Engineer—finite element
Aviation Stress Engineer—finite element analysis
Aviation Technician
Aviation Tooling Supervisor—machine & tooling exp
Avionics/Electrical Design
Business Systems Analyst
C Series Avionics Engineer—6 yrs avionics sys design
CATIA Design Engineer—high vibration
CATIA V5 Designer
CNC Programmer—CATIA V5
Cadence Designers—must be US citizen, degree preferred
Certification Engineer
Configuration Management Analyst
Configuration Manager—MIL-HDBK-61A
Control Systems Engineer—petroleum refining
Cost Account Manager—engineering
DER Power Plant/Fuel Systems Installations
DOORS Engineer—traceability
Designer—mechanical systems/FEA/DFM-A
Director of Mobile Surveillance Programs
Director of Project Management—surveillance/security
E&I Contract Construction Supervisor
E&I Planner/Reliability Contract Resource—petrochem
Electrical Designer—industrial/lighting-grounding plan
Electrical Engineer—FAR Part 25
Electrical Engineer—PE license
Electrical Engineer—components, equipment and systems
Electrical Engineer—electrical components & equipment
Electrical Engineer—prefer a PE/chemical-pulp/paper
Electrical FPGA Design Engineer
Electrical/Instrumentation Designer—AutoCAD
Electromechanical Technician—soldering/calipers
Electronic Manufacturing Engineer
Equipment Maintenance Technician
Facility Project Engineer—AutoCAD layout/design
Fibersim Tooling Engineer
Final Phase Electrical Engineers
Final Phase Interior Designers
Flight Test Engineer
Flight Test Instrumentation
Flight Test Instrumentation Engineer
Flight Test Software Engineer—HTML/CGI/SQL
GIS Developer—GE Smallworld/utility industry
Instrument Designer—industrial/P&ID/data sheets
Interior Engineer—CATIA/Enovia V5 R19 or later
Interiors Design Engineer
Interiors/Mechanical Systems—CATIA V5
Jr Level Process Engineer—prefer boiler exp
Lead Instrument & Control Engineer—PE
Lead Mechanical Test Engineer—pressure/flow
Lead Project Analyst
MRB Production Engineer IV—metals/SPC
MRB/Production Engineer—composites/blueprints/GD&T
Manager—maintenance programs and reliability
Manufacturing Composites Engineer
Wichita, KS
Vero Beach, FL
C Pendleton, CA
Vero Beach, FL
Midwest
Tempe, AZ
Wichita, KS
Burbank, CA
Savannah, GA
Everett, WA
Rochester, NY
Denver, CO
W Hartford, CT
Baltimore, MD
Houston, TX
Stratford, CT
Savannah, GA
Rockford, IL
Tucson, AZ
Baltimore, MD
Baltimore, MD
Billings, MT
Billings, MT
Birmingham, AL
Wichita, KS
Pittsburgh, PA
Tucson, AZ
Tucson, AZ
Birmingham, AL
Phoenix, AZ
El Dorado, KS
Baltimore, MD
Wilson, NC
Kinston, NC
Canoga Park, CA
Riverside, CA
Savannah, GA
Savannah, GA
Vero Beach, FL
Vero Beach, FL
Savannah, GA
Wichita, KS
Columbus, OH
Birmingham, AL
Wichita, KS
Savannah, GA
Savannah, GA
Birmingham, AL
Greenville, SC
Torrance, CA
Phoenix, AZ
St Louis, MO
St Louis, MO
Burlingame, CA
San Clemente, CA
CCI Staffing/Bedford
Adtl Tech/Framingham
Volt/Phoenix
Choson/Wichita
Triad Worktek/Calabasas
Spencer Reed/Torrance
Windspeed/Everett
Nesco/Lake Mary
Volt/Phoenix
Inconen/Culver City
GAS/Lakeville
Southern Des/Spartanburg
Butler America/Shelton
PDS/North Charleston
Comforce Tech/Bellevue
GAS/Lakeville
GAS/Lakeville
Foster/Wichita
Foster/Wichita
Choson/Wichita
Concise/Cranberry Township
Tech Plus/Valley Head
Inconen/Culver City
GAS/Lakeville
Adecco/San Diego
Foster/Wichita
Yoh/Chesterfield
Spencer Reed/Torrance
Precision Pers/Clearwater
Agente/Colleyville
Choson/Wichita
GAS/Lakeville
Choson/Wichita
PDS/Tukwila
Agente/Colleyville
On Assignment/Calabasas
Apollo/Wildwood
Apollo/Wildwood
Butler America/Shelton
DOE
DOE
27.55/hr
DOE
open
26.55+hr
DOE
open
to 23/hr
DOE
open
65K
50/hr
DOE
—
40/hr
open
open
—
—
DOE
—
—
—
DOE
open
open
open
—
64-75/hr
—
open
35/hr
32/hr
open
69/hr
to 57/hr
54-57/hr
65-67/hr
63-66/hr
68-74/hr
DOE
—
—
DOE
62/hr
59-62/hr
—
—
52-54/hr
54.77/hr
open
open
DOE
55/hr
poss
poss
poss
no
yes
—
split
split
poss
—
poss
—
poss
split
—
poss
yes
split
poss
—
no
poss
poss
—
split
split
yes
poss
split
poss
split
split
no
poss
poss
split
poss
yes
yes
yes
split
split
yes
—
split
yes
yes
split
—
poss
—
poss
poss
no
poss
poss
poss
poss
poss
yes
—
poss
—
poss
poss
poss
—
poss
yes
—
poss
yes
poss
poss
poss
yes
poss
poss
—
poss
yes
poss
poss
—
poss
—
yes
poss
poss
poss
poss
poss
yes
yes
yes
poss
poss
yes
—
poss
poss
poss
—
—
poss
—
poss
poss
poss
poss
—
1 year
6 mos
direct
6 mos+
1 year+
—
LT
LT
—
6-9 mos
to 30 days
6 mos
12 mos+
LT
LT
6 mos+
ST
LT
direct
direct
11 mos+
11 mos+
ST
LT
—
LT
LT
6 mos+
6 mos
6 mos+
LT
6 mos+
4 mos+
ST
11 mos
LT
1 year+
18 mos
6 mos
1 year+
LT
9 mos
ST
LT
LT
1 year+
—
—
9 mos
6 mos
—
—
direct
6 mos+
ASAP
ASAP
ASAP
ASAP
ASAP
—
ASAP
ASAP
ASAP
—
ASAP
—
ASAP
ASAP
—
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
—
ASAP
ASAP
ASAP
ASAP
—
ASAP
ASAP
Sept
ASAP
Now
ASAP
Now
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
ASAP
—
ASAP
ASAP
ASAP
—
—
ASAP
Sept 23
ASAP
ASAP
ASAP
ASAP
Index
Index
Index
Index
Index
Front
Index
13
Index
Index
Index
Front
7
Index
Index
9
3
Index
12
Index
Index
Index
Index
Index
Index
Index
12
12
Index
7
Index
Index
Index
Index
13
13
Index
Index
Index
Index
Index
Index
Index
Index
Index
3
Index
Index
Index
Index
Index
12
12
Index
9
JOBLINES – Continued on Page A-3
THIS WEEK’S DISPLAY ADVERTISERS:
Additional Contract Serv . . .7
Advanced Technology . . . . .7
Apollo Professional . . . . . 12
Aspire Group . . . . . . . . . . .14
Belcan . . . . . . . . . . . . . . . . .8
Butler . . . . . . . . . . . . . . . . . .9
Chipton-Ross . . . . . . . . . . . .6
Comforce . . . . . . . . . . . . . .12
CTS International . . . . . . . .2
A-2 – September 11, 2013 C.E. Weekly
Global Contract Prof . . . . . .5
Inconen . . . . . . . . . . . . . . . .7
Johnson . . . . . . . . . . . . . . . .8
National Engineering . . . .Back
Noramtec . . . . . . . . . . . .10-11
PDS . . . . . . . . . . . . . . . . . . .3
Peak . . . . . . . . . . . . . . . . . .15
Superior . . . . . . . . . . . . . . . .4
TDM . . . . . . . . . . . . . . . . . .A-1
Triad Worktek . . . . . . . . . .13
Volt . . . . . . . . . . . . . . . .Front
Yoh Engineering . . . . . . . .13
BRANCHES:
Anchorage, AK
907.562.1633
Atlanta, GA
877.272.0088
We pay thousands in referral bonuses every month!
Austin, TX
800.917.2841
Charleston, SC
866.224.2745
Costa Mesa, CA
800.234.8644
Dallas
800.270.4737
214.647.9600
Green Bay, WI
800.333.1389
Hartford, CT
866.636.4723
Houston, TX
888.737.0050
Irving, TX
800.270.4737
Newport News, VA
800.921.8179
Pascagoula, MS
228.497.4646
Phoenix
800.456.8644
800.657.0997
San Antonio, TX
866.570.1503
Seattle, WA
800.678.8644
St. Louis, MO
800.472.3737
Tampa, FL
866.517.9514
Washington, DC
877.418.3737
Westlake Village, CA
866.458.4322
Wichita, KS
800.333.8644
Seattle, WA • 800.678.8644 • [email protected]
HOT*** Call for Great Engineering Opportunities in Savannah, GA
Costa Mesa, CA • 800.234.8644 • [email protected]
Laser Tracker Techs - [email protected] - Verisurf V9/10
Electronic Engineers - [email protected] - BS plus 14 years exp. Maritime SIGINT and recent background
in Cyber Warfare systems a heavy plus! Secret clearance required
MANY NEEDED - PWB Designers - [email protected] - 7+ years exp in military and space grade Printed
Wiring Board (PWB) design of analog, digital, RF, flex, rigid, high voltage power supplies, High Density Interconnect
(HDI) and blind and buried vias. Must have 5+ years exp using Mentor Graphics Expedition. AutoCAD and/or
CATIA dxf and STEP files
Civil EIT - [email protected] - BS and 2+ years exp - New Jersey
St Louis, MO • 800.472.3737 • [email protected]
MIDWEST OPENINGS
Structural Dynamics Engineers - Flutter, vibration, ground and flight testing, weapons a plus
Software Engineers - Configuration and data management, C++, BS degree
Stress Engineers - Damage tolerance and large aircraft
Upcoming Openings: UG NX Designers
ALABAMA OPENINGS
Structural Designers - Mid level, BS degree, CATIA V5, Enovia
Stress Engineers - Spacecraft, Abaqus or Nastran/Patran/FEMAP
Stress Engineers - Nastran/Patran and CSW - HOT - MANY NEEDED
Santa Clara, CA • 855.428.8392 • [email protected]
*** HOT *** Java Developers and Software Engineers
Bay Area - Oracle Database Developer - Respond to [email protected]
Sr Electrical Engineer - Aerospace experience - Respond ASAP to [email protected] • 408.916.4846
Sr Mechanical Design Engineer - Pro/E 4.0 - Respond ASAP to [email protected] • 408.916.4846
Capital Project Cost Engineer - Anchorage, AK
Designer/Drafter (Area Graphic Designer) - Cypress & San Diego, CA
Software Tester/Developer - Redondo Beach, CA
Engineering Technician - Santa Ana, CA
Technical Support Engineer - Sacramento, CA
Engineering Technician - Issaquah, WA
Engineering Technician - Torrance, CA
Westlake Village, CA • 866.458.4322 • [email protected]
PASADENA /MOJAVE – All jobs long term with OT – Rates DOE – U.S. Citizens, degreed and 5 yrs relevant exp
Rocket Propulsion Systems Test Engineers - Various slots, test, develop, flight ordnance, Boeing engine integration,
gas, liquid, LOX, UG NX6 or higher
Composite Stress Engineer - Composite fab, design and analysis, FEA, Nastran, FEMAP, and weight reduction studies
Structures Design Engineers - Degreed, CATIA V5, 1000+ hours of CPD workbench – to $65/hr with 10 hrs/week OT
WICHITA - Send resumes to [email protected]
30 Composite Layup Technicians • 15 Aircraft QA Inspectors • 15 Aircraft Cabinet Finishers
C.E. Weekly September 11, 2013 – 3
Putting great people
in great jobs.
GLOBAL CONTRACT PROFESSIONALS
4000 Sandshell Drive • Fort Worth, TX 76137
800-942- 2376 or 817-847-6673
Fax: 817-847-9444
AEROSPACE ENGINEERING OPENINGS
SAVANNAH, GEORGIA - HOT JOBS...
STRUCTURAL DESIGN ENGINEER • DERs-Structural, Electrical or Power Plant
STRESS ENGINEERS • POWER PLANT ECS FUEL DESIGNERS
ELECTRICAL INSTALLATION ENGINEERS-EWIS • AERODYNAMICS ENGINEERS
PERFORMANCE ENGINEERS • FLIGHT DYNAMICS ENGINEERS-Control Laws
ELECTRICAL POWER DISTRIBUTION ENGINEER • TOOL DESIGNERS
LOADS ENGINEERS • DATABASE DEVELOPER • FLIGHT TEST DESIGN ENGINEERS
FLIGHT TEST INSTRUMENTATION
SLIDELL, LOUISIANA ...
MECHANICAL DESIGN ENGINEERS-SolidWorks • TOOL DESIGNERS-SolidWorks
ELECTRICAL DESIGN ENGINEERS-SolidWorks • SUBCONTRACT ADMINISTRATORS
MECHANICAL ENGINEER-SolidWorks
ORLANDO, FLORIDA ...
ELECTRICAL ENGINEER • ELECTRICAL TECHNICIAN • PROGRAMMER/ANALYST
MECHANICAL DESIGN ENGINEER • SOFTWARE ENGINEER
COATESVILLE, PENNSYLVANIA ...
CERTIFICATION ENGINEER • DESIGN & INTEGRATION ENGINEER
PROCESS ENGINEER • MASS PROPERTIES ENGINEER
MECHANICAL DESIGN ENGINEER
CONTACT ONE OF OUR RECRUITERS FOR INFORMATION
Mark Milligan ~ 877-359-2160 ~ [email protected]
Tracy Harris ~ 877-822-2125 ~ [email protected]
Daniel Miller ~ 877-227-2123 ~ [email protected]
BENEFITS
AVAILABLE:
Long Term Contracts • Top Per Diem Rates • Direct Deposit
Immediate Enrollment into 401(k) Program (Roth & Traditional)
Travel Reimbursement • Pre-Taxed Discounted Insurance Benefits Available • Referral Fees
SYSTEM PROS
ADDITIONAL CONTRACT SERVICES
SPI
NATIONAL DIVISION
www.acsnatl.com
www.syspros.com
TM
HOT CONTRACT NEEDS
THROUGHOUT THE COUNTRY
PHONE: 877-334-7700
FAX:
877-335-7700
Sign-on Bonus, Travel Pay, Per Diem and Benefits Package
available on some assignments
IMMEDIATE NEEDS - Call our National Recruiters
COMPONENTS ENGINEER - BSEE, 10+ years exp, electronics Rohs.
Mechanical and electrical parts, database admin - Contract to direct,
East Coast
PLC PROGRAMMER - AB PLC, RS Logix 5000 prog manufacturing lines 24 months, US and International Travel
MECHANICAL DESIGNER - Unigraphics NX 6/7, US citizen, sheet metal,
plastics, 3D modeling, GD&T, ASME and ANSI stds, Mil stds Needed ASAP
MANUFACTURING ENGINEER - Cable manufacturing exp, BSME or
BSEE - Contract to Direct, Massachusetts
PRO/E - Plastics design, strong surfacing skills - Michigan
UNIGRAPHICS NX 7.5 - Must have closures/door design exp - Michigan
CNC PROGRAMMER - Expert MasterCam prgmg exp - Pennsylvania
• Contact Adam, Sean, Zack or Bob •
at 800-661-8272 • email: [email protected]
76 Treble Cove Rd., Bldg. 2 • North Billerica, MA 01862
800/661-8272 • 24 Hr Fax: 800/661-4055
INCONEN
CONTRACT / TEMPORARY SERVICES
Openings in Savannah, GA
FLIGHT CONTROLS SYSTEMS ENGINEERS
Exp in augmented air vehicle control system modeling, design and
analysis. Knowledge of stability and control, and application of handling qualities criteria to control system design. Exp with 14 CFR Part
25 certification, especially of an airplane with a fly-by-wire control
system. MATLAB and Simulink fluency required
POWER PLANT / ESC ENGINEERS
Engine and subsystems, fuel systems, APU, bleed air, air conditioning, and cabin pressurization. CATIA V5
ELECTRONICS SYSTEMS ENGINEERS
• Electrical Power Systems - Generation, distribution, batteries, etc.
• Aircraft dataload exp. Exp in digital communication busses ARINC
615, ARINC 429
SR INTERIOR DESIGN ENGINEERS
Mechanical Engineering Positions
•
•
•
•
•
•
•
•
CATIA Designers - Composites
BSME - 2000 hrs Pro/E (MA, MN, TX)
Stress Engineers - Nastran
FEA Engineers - Recent FEMAP
UG Electrical Designers
Manufacturing & Methods Engineers - Visual Instruction Tools
Avionics EEs
SolidWorks Design - Aircraft structures / industrial machine
Send resume to [email protected]
Software & Hardware Openings
• Embedded Programmer - CAN
• Software Engineer - Embedded development and strong C++,
OOD (CT)
• Software Build Release Engineer or Coordinator (Midwest)
• DSP Engineer - Any chipset
• Board Level and FPGA Design Engineers
• Test Equipment Engineer
• Motor Controls Engineer
• Power Supply Engineer
★ SPECIAL AD ★
DESIGN ENGINEER
Bachelor’s degree or academic equivalent of Bachelor’s in
Computer Science, Mechanical Engineering or related field,
plus 5 years exp in CAD and Pro/E Wildfire to design systems
and components for trucks and heavy duty vehicles.
Will require travel to unanticipated client sites in US for
extended periods on short notice. Job in Walpole, MA
Mail resumes to:
Attn: HR, Advanced Technology Innovation Corp,
PO Box 32, Walpole, MA 02081. No calls! EOE
Must have high proficiency in use of CATIA V5 and SmarTeam. Exp
in design of aircraft interior components, installations and mechanical systems such as galleys, lavatories, closets, interior panels,
water/waste, oxygen and/or conditioned air/gapers preferred. Exp in
designing installations for electrical LRUs, antennas is desired
DERs
Positive environment • Group Life • Health / Dental
LTDI • 401(k) • Paid Gym Membership
Stress - Structures - Electrical - Avionics. Contract W2 positions, up
to $155 per hour
Send resumes to: [email protected]
www.inconen.com
(888) 208-8064
Advanced Technology is an Equal Opportunity / Affirmative Action Employer
Check out our website at:
www.advancedtechno.com
(800) 820-6811 www.worktek.com
HUNDREDS OF
NATIONWIDE
OPENINGS
California
SYSTEMS ENGINEERS
VPX/VME Systems Architect Design
EXPLORE
NEW HEIGHTS WITH
Washington
CATIA PAYLOAD
STRUCTURAL DESIGN &
STRESS ANALYSIS ENGINEERS
MANUFACTURING PLANNERS
BUSINESS OPERATIONS SPECIALIST
AUDITORS
PROJECT MANAGER / STAFF ANALYST
Arizona
APACHE TECHNICAL WRITERS
EMBEDDED SOFTWARE ENGINEERS
AVIONICS / ELECTRICAL TECHNICIANS
AIRCRAFT TECHNICIANS
STRUCTURES / AIRCRAFTSHEET METAL MECHANICS
St Louis, Missouri
TECHNICAL WRITERS
EMBEDDED SOFTWARE ENGINEERS
PROCUREMENT AGENTS
SR ELECTRONIC TECHNICIANS
Employee Benefits:
$$ign on Bonus • Paid Holidays • Annual Bonuses
Referral Bonuses • Medical Insurance
Life Insurance • 401(k)
Per Diem • Direct Deposit Weekly
For Immediate Consideration,
Call Dan Ellis at 800/820-6811
Email: [email protected]
or Apply Online at www.worktek.com
Hundreds of openings available for
innovative, long-term projects with our
aerospace and defense clientele nationwide.
• Fuel Systems Des Engineer - North Carolina
• Direct Mfg & Production Engrg Positions
Relevant aerospace exp, leadership and
supervisory exp required - Everett, WA
• Quality & Liaison Engineers
QE reqs supplier mgmt exp, swing and 2nd shift,
contract liaison roles exp reqd - Seattle, WA
• Stress Engineers
Interior and structural - Seattle / Everett, WA
• Certification Engineers
Seattle / Everett, WA and Southern CA
Contact: [email protected] or
[email protected]
Candidates with
SECRET and
TOP SECRET
clearances are
also needed for
positions across
the country.
SOUTHERN CALIFORNIA
OPENINGS COMING SOON!
• Structural Design Engineers
Large aircraft exp with CATIA V5
• Propulsion Engineers
Large aircraft exp required
• Interior & Structural Engineers
Contact: [email protected] or
[email protected]
VISIT
jobs.yoh.com today
Seattle, WA 425-732-6070 l St. Louis, MO 314-878-0666
Denver, CO 303-280-9000 • Phoenix, AZ 602-235-9739
For more information about Yoh, visit yoh.com
©2013 Yoh Services LLC - a Day & Zimmermann Company
AIRCRAFT ENGINEERING & DESIGN
Connecticut ...
Survivability Engineer (36257) - Responsible for vulnerability, survivability, NBC assessments and qualification of
rotorcraft components, subsystems and full-up systems. This assessment involves development of ballistic vulnerability
models and basic data, interpretation of results, and implementing survivability enhancement features. Furthermore, the
contractor position involves planning and execution of Live Fire Test and Evaluation (LFT&E) programs for rotorcraft critical systems. Education: BS or MS in Mechanical or Aerospace Engineering. Advanced degree preferred
Ground Test Engineer (36218) - Responsible for all aspects of ground testing helicopter components and systems.
Requires application of all mechanical / aerospace engineering disciplines to a wide variety of technical problems. Typical
tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer
data analysis tools, and generation of test plans and reports. Responsible for final conclusions and recommendations on
the performance, safety, qualification, and adequacy of tested components and systems
• US Citizenship or Permanent Resident Required •
• Paid Holidays • Dental
• United Healthcare Medical Insurance
• Vision • Direct Deposit
Jerry Rothchild
Direct Dial: 203/926-2705
or Toll Free: 800/837-9114 x2705
www.butler.com
AIRCRAFT ENGINEERING & DESIGN
Arizona ...
FPGA Design Engineer - FPGA design, simulation, and lab integration. DO-254 Level A design, VHDL, Xilinx.
Phoenix, AZ
Southern California ...
Mechanical Design Engineer - NX6 or NX7.5. Flight controls / pilot controls, mechanisms, actuators, control
systems
Texas ...
Configuration Control Manager - Configuration management, FAA, STC documents, aircraft engines.
Contract to hire in Midland, TX
• US Citizenship or Permanent Resident Required •
• Paid Holidays • Dental
• United Healthcare • Vision • Direct Deposit
Nikki Diman
Direct Dial: 949/251-1731
www.butler.com
Toll Free - 866-APS-EDGE (866-277-3343)
Visit us on the web at www.apollopros.com
ARIZONA BRANCH OPENINGS ... Test Engineer - (20941) Hydr-
aulic flight controls, actuation sys, LabView - CA • Engineer - (20942) Electronic
manufacturing, environmental test, Solumina - CA
... Email: [email protected]
CALIFORNIA BRANCH OPENINGS ... Software Engineering
Specialist (22666) BS degree, C++, RTOS, CMMI, aerospace/defense background with secret clearance - CA • CAD Designer (21988) 4+ yrs exp, NX6 CAD,
ANSI Y14.5, Teamcenter 2007, exp preparing drawings for gov and military contracts - VA • Sr Electrical Engineer-Power Conversion (22083) BS degree, high
power DC/DC power supply design, SPICE, EMI/EMC design and test - WA •
Subcontract Specialist (22379) BS degree, 6+ years exp, electronic components, machined parts, valves, metallic structures, IPT - WA
FLORIDA BRANCH OPENINGS ... Electrical Design Engineer
(24161) Flight control systems, communication systems, BS degree - WI •
Structural Analyst (24130) Aircraft interiors, FEMAP, 10+ years exp - WI •
Design Engineer (24043) AutoCAD, CATIA V5, aircraft interiors, galleys, stow
bins - WI • Process Control Engineer/Electrical Engineer (23441) PLC, DCS,
HMI programming, control systems exp - FL
MARYLAND BRANCH OPENINGS ... Mechanical Engineer
(19509) BSME, UG NX, solid mechanics, lead position • Mechanical Engineer
(16536) CATIA V5, Enovia, digital mockup - CT • Design Engineer (19019) UG
NX, 3D modeling, product definition and checking - CT • Structural Engineer
(18861) ANSYS, Nastran, engine exp pref - CT • Manufacturing Engineer
(22704) Methods improvement, machinery layout, tooling
NO. CALIFORNIA BRANCH OPENINGS ... Composite
Technician (22501) Produce a quality product by laying up material and vacuum
bagging using proper techniques • Information Systems Developer (21342)
Extract Legacy data from existing Cincom system
CONNECTICUT BRANCH OPENINGS ... Sr Thermal Analyst
(23646) 5+ yrs in aero-thermal, CATIA, MS Office, project management in estimating and tracking - CT • Avionics System Engineer (23561) Familiarity with
modern avionics architecture components and systems engineering processes CT • Electrical Systems Engineer (23821) US citizen, Canada location, CSeries
electrical system content - Canada ... Email: [email protected]
MISSOURI BRANCH OPENINGS ... Sheet Metal, Avionics,
Interior Installers, A&P, Aircraft Painters and More! (23891/2) 2+ yrs aerospace - LT - GA, CA, MA & WI • Mfg Engrg Planner (24061) CATIA V5, SAP, 5+
years exp, aerospace, long term - NC • Production Team Lead-Aerospace
(24113) 5+ years exp, exp running union environment, metals - LT - MO/IL • NC
Prgmr-UGNX 8.5, Aerospace (23507) Hard metals, 5 axis, detailed work, blades,
tight tolerances - LT - CT
NEW HAMPSHIRE BRANCH OPENINGS ... Sr Test Engineer
(23026-615) BS with 8+ yrs exp, design, develop, test plans, process, test strategies and test requirements, RF, NITS and LabWindows - NY • Process EngineerElect & Mech (23747-703) All background exp reviewed, BSME-BSEE, 5+ years,
secret - NH • Sr Java Developer (23790) SW eng design, code, COTS integration, test, troubleshoot in Java, Javascript, HTML. Exp SQL, secret - AZ
We’ll help you find the ideal job to meet your interests and qualifications!
Positions Available Now
•
•
•
•
•
•
•
AVIONICS ENGINEER
ELECTRICAL DESIGNER (CATIA V5)
INTERIOR DESIGNER
MANUFACTURING ENGINEER
NC PROGRAMMER
PROGRAM MANAGER
PROPULSION DESIGNER
•
•
•
•
•
•
•
QUALITY ENGINEER
SOFTWARE ENGINEER (CATIA V5)
STRESS ENGINEER
SYSTEMS ENGINEER
TECHNICAL WRITER
TOOL DESIGNER
MANY OTHER POSITIONS!
Benefits Package: Medical • Dental • Per Diem • 401(k) • Holiday • Vacation Pay
PLEASE EMAIL US TO SEE IF YOUR BACKGROUND MATCHES ANY OF OUR JOB OPENINGS
COMFORCE Northeast
225 Broadhollow Road, Suite 110E
Melville, NY 11747
COMFORCE Northwest
13208 NE 20th Street, Suite 100
Bellevue, WA 98005
HELICOPTER CONTRACTS - STRATFORD, CT
AVIONICS SYSTEM INTEGRATION ENGINEERS
Familiarity with modern avionics architectures and requirements, acceptance test procedure development, and avionics
laboratory design for both military / civil applications
CONFIGURATION MANAGEMENT ENGINEERS
Knowledge of ITAR, bill of materials, Mil-Std-973 and product lifecycle management processes
FLIGHT MANAGEMENT SYSTEM ENGINEERS
10+ years software engineering experience using DOORS, C/C++ or similar software
to develop airborne avionics systems associated with military and civil rotary wing aircraft
GROUND TEST ENGINEERS
Develop and implement test procedures used to validate the performance of
installed aircraft systems and components
HUMAN FACTORS ENGINEERS
Write test plans for lighting, egress, workload, reach and accommodation and
write tests reports for submittal to the FAA and customer
SR AIRFRAME STRESS ANALYSTS - Ft Worth, TX
10+ years classical airframe analysis techniques required with FAA, AC43.13 and Part 23 Requirements preferred
SR SYSTEM SECURITY ENGINEERS
Responsible for either Information Assurance (IA) or Anti-Tamper (AT) compliance of helicopter support systems
Contact Marisa Boasa • [email protected] • 860/916-4102
Contact Nancy Boyce • [email protected] • 860/916-9873
Contact Stan Malitsky • [email protected] • 860/508-4280
Belcan TechServices, East Hartford, CT Office
•Indianapolis, Indiana•
AEROSPACE PROJECT ENGINEERS
MANUFACTURING/NC PROGRAMMERS
GAS TURBINE DESIGN ENGINEERS
CONTROL SYSTEMS QUALITY ASSURANCE ENGINEERS
SOFTWARE VERIFICATION
•Mt Vernon, Ohio•
ELECTRICAL ENGINEER - Generator Specialist
MATLAB ENGINEERS - Gas turbine packaging
•Cincinnati, Ohio•
PRO/E DESIGNERS - Wildfire 4 with Intralink 3.4
PLC CONTROLS ENGINEERS & TECHNICIANS
EE SAFETY/RELIABILITY ENGINEER
E/M PACKAGING DESIGN ENGINEERS
RF TECHNICIANS
SOLID EDGE GDS MACHINE DESIGNERS
•Anna, Ohio•
ELECTRICAL DESIGNERS - AutoCAD and controls hardware
MECHANICAL AND ELECTRICAL TECHS - Robotics,
CNC, automation troubleshooting
•Everett, Washington•
•Charleston, South Carolina•
GAS TURBINE TECHNICAL SUPPORT SPECIALIST
A&P MECHANIC - Turbine engine customer support
P lease send resumes to
LARRY HEAD
Email:
[email protected]
Belcan TechServices
(800) 945-1900
Technical & Engineering
Staffing
Atlanta, GA - 800-841-0927
Birmingham, AL - 800-569-3555
Charleston, SC - 800-215-3555
Chicago, IL - 800-323-4987
Armonk, NY
Dallas, TX
Irvine, CA
Knoxville, TN
Los Angeles, CA
Mobile, AL
Oklahoma
Philadelphia, PA
San Jose, CA
St Augustine, FL
St Louis, MO
-
914-940-2750
800-784-6545
877-241-4124
800-574-8324
866-993-2440
800-784-6529
800-633-6594
877-239-2877
866-656-0539
877-601-9193
866-296-3068
DESIGN ENGINEERS-Pro-cabling exp - North Texas Area
AVIONICS/ELECTR SYS ENGINEER-Must have BSEE - Marysville, WA
STRUCTURAL/MECH DES ENGR-CATIA V5 exp, $50/hour - Dallas, TX
MANUFACTURING & STRESS ENGRG POSITIONS - Savannah, GA
STRESS ENGINEER-Nastran/Patran - Dallas, TX
TOOL DESIGN ENGINEER-CATIA V5 - Dallas, TX
-For above openings, contact Michael Geil at 800-784-6545 x252
or email: [email protected]
LG INDUSTRIAL E/I, ELECTRICAL, MECHANICAL & STRUCTURAL
DESIGNERS-Multiple needs - Long Term Assignments in No. Alabama
-Todd Hite at 800-841-0927x241 or email: [email protected]
AVIONICS ENGINEER-Exp with avionics architectures and DOORS Contract in Connecticut
INSTRN TECH-Install strain gages, thermocouples, accelerometers - Florida
-Kevin Fedor at 866-656-0539 or email: [email protected]
I&C ENGR-10 yrs devel of P&IDs, SAMA diagr, binary logic diagrams, loop
sheets, motor elementaries, and ISA data sheets in pwr generation - Alabama
-email: [email protected] or 800-841-0927 x240
SR LAB TECHNICIAN-Intl launch support for satellite sys. AS in
Electronics, test eqpt, DMM, o-scope, etc. 6+ mos, US citizen - Palo Alto, CA
-Randy at 408-728-9512 or email: [email protected]
ELECTRICAL HARNESS INSTALL/APPL ENGINEER, FLIGHT
TEST ENGINEER-Instruments/telemetry, TOOLING ENGINEER,
MANUFACTURING PLANNER, QUALITY ENGINEER
-Recruiter at 800-841-0927 or email: [email protected]
PCB DESR-Military or aerosp exp. 5 yrs Allegro PWB 16.5 Cadence HDL
16.5 schematic capture. PWB fab, circuit card assembly process-Sterling, VA
-Christopher Aiello at 610-828-6541 or email: [email protected]
The fastest way to a new career or contract position - APPLY ONLINE!
JSG Online Career Center: http://cli.gs/JSGJobs
CONTRACTS
AWARDED
Fluid controls, process, tool, actuation product line,
Bachelor’s degree - Southern California*
PROJECT MANAGER
IT projects, global scale exp, ERP / HR / financials,
Bachelor’s degree - Ohio*
BS/MS degree, precision tolerance, high volume, CAD,
lean, micron tolerance - North Carolina*
ENGINEER SPEC, NC PROGRAMMER
CAM, mentoring, 3-5 axis, CATIA V5, lathe, Zeiss CMM,
Robot, 3D modeling - Ft Worth, Texas*
SOFTWARE ENGINEER
US citizen, UML, Java and Javascript, Oracle, Rhapsody,
analysis, design, test - Ft Worth, Texas
Len – MA, [email protected]
800/487-2967 • 617/535-6024
For additional requirement listings, please visit:
www.aspiregroup.net/jobs
*Benefits: Holidays, Longevity Bonus, Per Diem, 401(k),
Travel Pay, Direct Deposit, Deferred Comp Plan, Medical/Vision/Dental, etc.
Propper International Inc.,
Mayaguez, Puerto Rico,
has been awarded a maximum $137,828,391 contract for modular lightweight load carrying equipment. The contracting
activity is the Defense Logistics Agency Troop
Support, Philadelphia, Pennsylvania ... Javelin Joint
Venture, Tucson, Arizona, was awarded a
$67,664,020 contract modification for procurement
of 260 Block 1 rounds and command launch unit
(CLU) retrofit pricing for the U.S. Navy in support to
foreign military sales to the countries of Jordan,
Indonesia and Oman. The U.S. Army Contracting
Command - Redstone Arsenal (Missile), Redstone
Arsenal, Alabama is the contracting activity …
Wartsila Defense Industries, Chesapeake, Virginia,
is being awarded a maximum $65,000,000 contract
for water jet support and parts for the Improved
Navy Lighterage System (INLS) at Blount Island
Command, Jacksonville, Joint Expeditionary Base
Little Creek-Fort Story and Naval Amphibious Base,
Coronado. The Naval Facilities Engineering
Command, Headquarters, Washington, DC, is the
contracting activity.
Aerospace News – If sequestration isn't halted, it will have a sharp effect in 2014
with possible program cancellations and delays, said Dale Bennett, executive vice president of Lockheed's Mission Systems and Training division. "All the programs are on the
table to be discussed by the Pentagon,” said Bennett, speaking at the Reuters Aerospace
and Defense Summit. "The programs that are performing will have a higher probability of
proceeding forward." Some fear sequestration cuts could reduce the size of the Navy's
planned Littoral Combat Ship order ... Boeing believes its prospects in selling its F-15
Silent Eagle to South Korea are strong, despite some sources suggesting Lockheed Martin is in the lead for
the country's fighter contract. "We're confident in the bid that we've provided. It's an affordable bid and also
a very capable bid," said Dennis Muilenburg, Boeing's defense division president and CEO. South Korea is
expected to make a decision on the $7.4 billion deal within weeks ... An Ohio-based investment group is buying Bombardier's fractional ownership business, Flexjet, for $185 million along with up to 245 of Bombardier's
business jets, worth $5.2 billion. Directional Aviation Capital made a firm order for 85 of the business aircraft
with options for more, and it's that buy that is the significant part of the transaction for Bombardier, said Steve
Hansen, an analyst with Raymond James Ltd. "It's just really them focusing on their core business," Hansen
said. "This is a good opportunity to monetize it and package that with a fairly sizable order and an even bigger set of options" ... Boeing expects China's appetite for aircraft to grow better than expected, thanks to an
improving economy. The company raised its long-range forecast of the Chinese plane market by 6.1 percent,
citing the nation's growth in income, tourism and trade.
FFIIN
ND
DEER
RSS K
KEEEEPPEER
RSS
Do you have anything to trade, rent, buy or sell? If so, let us help. If you are a current C.E. Weekly subscriber, we will publish your ad 3 times at no cost
to you. Please mail your ads to C.E. Publications. Sorry, this column is not for business ads. C.E. Weekly reserves the right to refuse any submittal.
For Rent: Savannah, Georgia area. Furnished large master bedroom with private bath, cable TV, wi-fi, pool, kitchen privileges. $150
weekly. Please email [email protected]
For Sale: 66 Impala Super Sport convertible. Red with white interior and top. 283 automatic. Excellent condition. $24,000. Please contact Daniel Gamache at (316) 788-7528 or email [email protected]
INDEX OF
CONTRACT STAFFING FIRMS
REGULAR INDEX
ADVERTISERS
804 Technology
5381 Highway N, Suite 201
Cottleville, MO 63304
636/928-0330, FAX 636/530-3693
www.804technology.com
email: [email protected]
Additional Technical Support, Inc. (ATSI)
495 Old Connecticut Pass, Suite 110
Framingham, MA 01701-4567
877/871-0785
Adecco Technical
2526 W Wackerly Street
Midland, MI 48640
989/496-9377, 800/351-6646, FAX 989/496-2649
www.adeccotechnical.com
Advanced Technology
(please see our display ad)
P.O. Box 32
Walpole, MA 02081
877/334-7700, FAX 877/335-7700
www.advancedtechno.com
Advantage Technical Resourcing, Inc.
10632 Little Patuxent Parkway, Suite 337
Columbia, MD 21044
800/888-7864, FAX 410/715-9706
www.hirethinking.com
Acro Service Corporation
39209 6 Mile Road, Suite 250
Livonia, MI 48152
734/591-1100, 800/844-ACRO, FAX 734/591-1217
www.acrocorp.com, email: [email protected]
Adecco Technical
9171 Towne Centre Drive, Suite 215
San Diego, CA 92122
www.adeccousa.com
P.O. Box 9130
Norwood, MA 02062
781/251-8100, 800/225-8956, FAX 800/934-6644
Additional Contract Services
76 Treble Cove Road, Bldg. 2
North Billerica, MA 01862
800/661-8272, FAX 800/661-4055
Ad-Tek Engineering Services Inc.
2090 N Tustin Ave Ste 160
Santa Ana, CA 92705
714/573-7700, 800/451-0782, FAX 714/832-8790
www.adtekjobs.com, email: [email protected]
101 Metro Drive, Suite 264
San Jose, CA 95110
877/912-5720, FAX 408/452-9360
Aerostructures Contract Employees Inc.
2306 Oak Lane, Suite 203
Grand Prairie, TX 75051
972/263-3403, FAX 972/263-9518
Bentley Global Resources LLC
3937 Tampa Road, Suite 3
Oldsmar, FL 34677-3115
813/854-1500, FAX 813/854-1605
www.bentleygr.com
Delta Technical Solutions
3601 Algonquin Road, Suite 975
Rolling Meadows, IL 60008
847/387-8057, FAX 866/366-5061
www.dts.net, email: [email protected]
Aerotek, Inc.
9800 Cavendish Boulevard, Suite 120
St Laurent, QC Canada H4M 2V9
514/798-6450, FAX 514/798-6480
www.aerotek.com, email: [email protected]
Black Diamond Networks
23 Main Street
Andover, MA 01810
978/474-9980, 800/681-4734, FAX 978/470-0225
www.blackdiamondnet.com
Dineen Enterprises, Inc.
P.O. Box 185
Uniontown, OH 44685-0185
330/633-1210, FAX 330/633-1284
www.cjhunter.com/~dineen, email: [email protected]
Agente Technical
714 Centerpark Drive, Suite 140
Colleyville, TX 76034-2852
866/758-2494, FAX 866/717-5927
www.agentetech.com
Alex-Alternative Experts Inc.
4443 Brookfield Corporate Drive, Suite 110
Chantilly, VA 20151
703/502-9700, FAX 703/502-9705
www.alexinc.com
Allstates Technical Services
10 Inverness Center Parkway, Suite 350
Birmingham, AL 35242
205/437-7100, 877/972-5401, FAX 205/437-7112
www.asts.net
Airetel Staffing Inc.
P.O. Box 915864
Longwood, FL 32791-5864
407/788-2015, 877/877-4066, FAX 407/682-9705
www.airetel.comemail: [email protected]
American Contract Group
591 North Avenue, Suite 4-1
Wakefield, MA 01880
781/245-9000, 877/723-9087, FAX 781/245-9009
www.americancontractgroup.com
Apollo Professional Solutions, Inc.
Corporate Headquarters
29 Stiles Road, Suite 302
Salem, NH 03079
603/890-8778, 866/277-3343, FAX 603/890-6668
www.apollopros.com, email: [email protected]
—
additional Apollo Professional Solutions offices:
Glen Burnie, MD
Roseville, CA
Lakewood, CA
Wildwood, MO
Mesa, AZ
Windsor Locks, CT
Orange Park, FL
Aries Group
100 Cummings Center, Suite 219Q
Beverly, MA 01915
978/998-7577, 877/806-7977, FAX 978/998-6841
www.ariesgroupinc.com, email: [email protected]
Arnold-Hanafin Corp.
7400 North Federal Highway, Suite C-6
Boca Raton, FL 33487-1677
561/982-9570, 800/891-1086, FAX 561/982-9896
www.arnold-hanafin.com
Aspire Group
711 Boylston Street
Boston, MA 02116-2616
800/487-2967, FAX 617/500-7284
www.aspiregroup.net,email: [email protected]
Associated Staffing Inc.
626 Holcomb Bridge Road, Suite 600
Roswell, GA 30076
770/643-8554, 888/427-4562, FAX 770/643-8558
www.asi-ga.com, email: [email protected]
Belcan TechServices
11591 Goldcoast Drive
Cincinnati, OH 45249
513/489-4300, 800/945-1900, FAX 513/489-0830
www.belcan.com, email: [email protected]
Belcan TechServices
20 Westbrook Street, Suite 2N
East Hartford, CT 06108-3400
860/916-4102
www.belcan.com, email: [email protected]
Butler America
2500 Red Hill Avenue, Suite 200
Santa Ana, CA 92705
949/251-1731
www.butler.com, email: [email protected]
Butler America
Shelton Pointe, Suite 204
2 Trap Falls Road
Shelton, CT 06484
203/926-2705, FAX 203/926-0082
www.butler.com, email: [email protected]
CadStar International Ltd.
100 Burtt Road, Suite 202
Andover, MA 01810-5915
978/251-7566, 800/562-8367, FAX 888/432-9737
www.net-temps.com/cadstar
Can-Tech Services
1750 Steeles Avenue W, Suite 205
Concord, ON L4K 2L7, Canada
416/360-0926, FAX 416/360-0521
www.cantechservices.com
CCI Staffing
805 Forest Ridge Drive, Suite 100
Bedford, TX 76022
www.contractconsult.com
Elite Technical Services Inc.
801 International Parkway, Suite 500
Lake Mary, FL 32746
407/767-5400, 800/60-ELITE, FAX 407/767-0944
www.elitetechnical.com
Enea Software & Services, Inc.
1711 W. Greentree Drive, Suite 108
Tempe, AZ 85284-2714
480/753-9200, FAX 480/753-6400
www.enea.com, email: [email protected]
Entegee Engineering Technical Group
5620 International Parkway
New Hope, MN 55428
763/577-9000, FAX 763/577-9010
www.entegee.com, email: [email protected]
ESG-Engineering Services Group
99 Cherry Hill Road, Suite 307
Parsippany, NJ 07054
973/334-4844, 800/258-1465 x206, FAX 800/354-1788
www.entegee.com, email: [email protected]
Foster Design Inc.
200 W Douglas, Suite 110
Wichita, KS 67202
316/832-9700, 800/345-3394, FAX 316/832-9357
www.fosterdes.com
CDI Business Solutions
4151 Ashford Dunwoody Road NE, Suite 160
Atlanta, GA 30319
www.cdicorp.com, email: [email protected]
GAS/Go Consulting Group Inc.
12 Harding Street, Suite 204-205
Lakeville, MA 02347
508/230-5030, 800/510-8050, FAX 508/230-5052
www.gcg-itstaffing.com, email: [email protected]
Chipton Ross
343 Main Street
El Segundo, CA 90245
310/414-7800, FAX 310/414-7808
www.chiptonross.com, email: [email protected]
GCR Professional Services
281 Cambridge Street
Burlington, MA 01803
781/270-7020, 800/234-6646, FAX 781/270-4488
www.gcrtemps.com, email: [email protected]
Choson Resource
8558 W 21st Street North, Suite 300
Wichita, KS 67205
316/729-0312, FAX 316/729-0709
www.chosonresource.com
Global Contract Professionals
P.O. Box 161127
Fort Worth, TX 76161-1127
817/847-6673, 877/280-2156, FAX 817/847-9444
www.teamglobal.com, email: [email protected]
Comforce Technical Services
999 Stewart Avenue, Suite 100
Bethpage, NY 11714-3632
516/470-6996, 800/562-0123, FAX 516/622-0650
www.comforce.com, email: [email protected]
—
additional Comforce office:
Bellevue, WA
CompuCom
11900 NE 1st Street, Suite 200
Bellevue, WA 98005
425/974-2000, FAX 425/974-2001
www.compucom.com
Concise Technologies
20530 Route 19
Cranberry Township, PA 16066
724/591-5869, FAX 724/591-5713
www.concisetechnologies.net
Global Partner Solutions
1415 32E Avenue
Lachine, QC, Canada H8T 3J1
514/636-5378 x237, FAX 514/780-1310
www.gpsi-intl.com
Global Search Agency Inc.
1712 S Main Street
Fairfield, IA 52556-9577
641/472-2735, 800/844-4658, FAX 641/469-6084
www.globalsearchagency.com
HEPCO, Inc.
160 Pehle Avenue, Suite 202
Saddle Brook, NJ 07663-5227
201/843-4400, 800/656-0099, FAX 201/843-0025
www.hepcoinc.com
CTS International
(please see our display ad and online banner)
11100 NE 8th Street, Suite 800
Bellevue, WA 98004
425/646-2688, FAX 425/635-7630
www.ctsinternational.com
Hi-Tec Professional Solutions
2501 E Piedmont Road, Suite 103
Marietta, GA 30062-7753
770/575-5855, FAX 770/575-5856
www.hi-tecsolutions.com
D3 Technologies
4838 Ronson Court, Suite R
San Diego, CA 92111
858/571-1685, 800/677-7868, FAX 858/715-1519
www.d3tech.com, email: [email protected]
Hi-Tek Professionals Inc.
850 Chester Pike
Prospect Park, PA 19076
610/534-8701, 888/271-1799, FAX 610/534-8697
Ian Martin Ltd.
465 Morden Road, 2nd Floor
Oakville, ON L6K 3W6 Canada
905/815-1600, 800/567-9675, FAX 905/845-2100
www.iml.com, email: [email protected]
Ian Martin Ltd.
3333 Cote Vertu Boulevard, Suite 202
Ville St-Laurent, QC H4R 2N1, Canada
514/338-3800, 888/465-9675, FAX 514/866-6180
www.ianmartin.com, email: [email protected]
Ian Martin Ltd.
4651Salisbury Rd Ste 433
Jacksonville, FL 32256
904/253-7894
www.ianmartin.com, email: [email protected]
Iconma LLC
850 Stephenson Highway, Suite 612
Troy, MI 48083
888/451-2519, FAX 800/489-8046
www.iconma.com
Ideal Engineering Staffing Solutions
A division of Joule
26148 Capital Drive, Suite B
Daphne, AL 36526
251/621-0242, 800/370-8495, FAX 800/264-6702
www.idealengineeringus.com
Idex Solutions
1650 NW Naito Parkway, Suite 120
Portland, OR 97209
503/295-1808, 888/256-7913, FAX 800/295-5438
www.idexsolutions.com
IMC
P.O. Box 46
Murrysville, PA 15668-0046
724/733-9900, FAX 724/733-7004
www.imcjobs.net
Inconen
6133 Bristol Parkway, Suite 232
Culver City, CA 90230
310/410-1931, 888/208-8064, FAX 310/410-1751
www.inconen.com, email: [email protected]
Ingenium Technologies
4216 Maray Drive
Rockford, IL 61107
815/399-8803, FAX 815/399-8804
www.ingeniumtech.com, email: [email protected]
ITC-Innovative Turnaround Controls
P.O. Box 5835
Pasadena, TX 77508
281/998-9547, 866/268-7311, FAX 281/998-9437
www.turnaroundcontrols.com
John Galt Staffing
60 Mall Road, Suite 101
Burlington, MA 01803
781/273-9995, 888/946-4754, FAX 781/273-9099
www.j-galt.com, email: [email protected]
Johnson Service Group
475 Frontage Road, Suite 103
Burr Ridge, IL 60527
630/655-3500, 800/323-4987, FAX 630/655-3506
www.jsginc.com, email: [email protected]
—
additional Johnson Service Group offices:
Armonk, NY
Knoxville, TN
Atlanta, GA
Mobile, AL
Bedford, TX
North Charleston, SC
Birmingham, AL
Philadelphia, PA
Calabasas, CA
San Jose, CA
Cameron, OK
St Augustine, FL
Irvine, CA
St Louis, MO
Judge Technical Services
National Division
321 S Main Street, Suite 100
Providence, RI 02903-7110
401/454-5100, 800/765-5874, FAX 401/454-7800
www.judge.com, email: [email protected]
Kelly Engineering Resources
15325 SE 30th Place, Suite 320
Bellevue, WA 98007-6538
425/643-0138, FAX 425/747-4649
www.kellyengineering.com
Nesco Resource
2 Summit Park Drive, Suite 200
Independence, OH 44131
216/674-5685, FAX 216/328-8173
www.nescoresource.com
7535 E Hampden Avenue, Suite 610
Denver, CO 80231-4838
303/755-1107, FAX 303/755-1023
Nesco Resource
153 Parliament Loop, Suite 1001
Lake Mary, FL 32746
407/719-8000, FAX 407/710-8001
5750 Castle Creek Parkway, Suite 187
Indianapolis, IN 46250
317/916-1044, FAX 317/916-1336
Nesco Resource
1400 E Southern Avenue, Suite 330
Tempe, AZ 85282
206/333-0459, FAX 480/898-1720
1815 S Meyers Road, Suite 850
Oakbrook Terrace, IL 60181
630/705-0594, FAX 630/705-0677
Noramtec Consultants
208 Mill Street, 1st Floor
Rochester, NY 14614
585/777-4040 x114, FAX 585/263-1840
www.noramtec.com, email: [email protected]
Route 120 & Wilson Road, WG1-3S
Round Lake, IL 60073
847/270-5032, FAX 847/270-5049
OLSA Resources Inc.
3836 N. Ballast Street
Portland, OR 97217
503/608-7895, FAX 503/608-7896
www.olsaresources.com, email: [email protected]
55 Westport Plaza, Suite 470
St Louis, MO 63146
314/275-7794, 866/656-8416, FAX 314/514-1589
On Assignment
26745 Malibu Hills Road
Calabasas, CA 91301
818/871-3312, FAX 877/242-2346
www.onassignment.com
Keltia Design Inc.
16824 44th Avenue West, Suite 240G
Lynnwood, WA 98037
206/368-9812, FAX 206/237-8950
www.keltia-design.com, email: [email protected]
Oxford Global Resources Inc.
100 Cummings Center, Suite 206L
Beverly, MA 01915
800/426-9196, FAX 978/538-1617
www.oxfordcorp.com, email: [email protected]
Kforce
3 Corporate Drive, Suite 214
Shelton, CT 06484
203/225-1700, FAX 203/926-1414
www.kforce.com
Pantheon Group Inc.
P.O. Box 72
Walpole, MA 02081
888/844-7480 x2002, FAX 888/444-7481
Lehigh Technical Service
538 Broadhollow Road, Suite 313
Melville, NY 11747-3676
631/385-1300, FAX 631/385-9275
www.lehightechnical.com
Lumenance
4449 Easton Way, Floor 2, PMB 20059
Columbus, OH 43219-7005
800/272-0815
www.lumenance.com, email: [email protected]
Manpower Professional
4100 Osuna NE, Suite 102
Albuquerque, NM 87109
505/998-6200, 888/275-0234, FAX 505/998-6225
www.manpowerprofessional.com/albuquerque
Midcom Corporation
3995 E LaPalma Avenue
Anaheim, CA 92807
714/630-1999, 800/737-1632, FAX 714/459-7055
www.midcom.com, email: [email protected]
Multax Systems Inc.
505 N. Sepulveda Boulevard, Suite 7
Manhattan Beach, CA 90266
310/379-8398, FAX 310/379-1142
www.multax.net, email: [email protected]
National Engineering Service Corp.
72 Mirona Road
Portsmouth, NH 03801
603/431-9740, 800/562-3463, FAX 603/427-0573
www.natleng.com, email: [email protected]
—
additional National Engineering Service Corp. office:
Houston, TX
PDS Technical Services
(please see display ad)
P.O. Box 619820
Dallas, TX 75261-9820
214/647-9600, 800/270-4737, FAX 888/740-1212
www.pdstech.com
—
additional PDS Technical Services offices:
Anchorage, AK
Pascagoula, MS
Atlanta, GA
Reston, VA
Austin, TX
San Antonio, TX
Charleston, SC
Santa Clara, CA
Costa Mesa, CA
Seattle, WA
East Hartford, CT
St Louis, MO
Green Bay, WI
Tampa, FL
Houston, TX
Tempe, AZ
Irving, TX
Westlake Village, CA
Newport News, VA
Wichita, KS
Peak Technical Staffing USA
Corporate Office
583 Epsilon Drive
Pittsburgh, PA 15238
888/888-7325, FAX 800/462-9275
www.peaktechnical.com
—
additional Peak Technical offices:
Horsham, PA
Oceanside, CA
Irvine, CA
Sunnyvale, CA
Lombard, IL
Troy, MI
New York, NY
Woodland Hills, CA
Calgary, ON, Canada
PFW GCT Inc.
1700 7th Avenue, Suite 2100
Seattle, WA 98101
425/753-7562, FAX 206/826-7189
www.pfw.aero/engineering
Powernetics Inc.
853 Spring Ridge Court
Belvidere, IL 61008
815/885-2088
www.powernetics.net
Precision Personnel Inc.
600 Cleveland Street, Suite 700
Clearwater, FL 33755
727/449-0600, 877/600-2333, FAX 727/449-0627
www.precisionpersonnel.com
Precision Resource Company Inc.
P.O. Box 318
Sharon, MA 02067
888/431-6300, FAX 888/431-6301
www.prcnational.com, email: [email protected]
Productive Data Solutions Inc.
7935 E Prentice Avenue, Suite 210W
Greenwood Village, CO 80111
303/220-7165, FAX 303/220-7425
www.pdsinc.com, email: [email protected]
RCM Technologies Inc.
1 Waterview Drive, Suite 204
Shelton, CT 06484-4368
203/225-5700, FAX 203/377-6298
www.rcmt.com
Remx Specialty Staffing
42231 6th Street West, Suite 205
Lancaster, CA 93534
888/872-2505, FAX 877/897-8722
www.remxengineering.com
SDS Resources LLC
300 Cahaba Park Circle, Suite 116
Birmingham, AL 35242
205/836-2551, 877/239-3013, FAX 205/836-9242
www.sdsresources.com
Source Group Professionals Inc.
4729 E. Sunrise Drive, Suite 244
Tucson, AZ 85718
888/352-8797, FAX 866/835-2145
www.sourcegrouppros.com
Southern Design Services Inc.
110 Carpet Drive
Spartanburg, SC 29303-5006
864/278-5000, 888/697-3869, FAX 864/278-5005
www.southerndesigninc.com
Spencer Reed Group
20280 S. Vermont Avenue, Suite 105
Torrance, CA 90502-1301
310/353-2363, 888/774-9998, FAX 310/353-2366
www.spencerreed.com
SRI Technologies
1250 Bank Drive
Schaumburg, IL 60173
847/330-1222, FAX 847/330-1411
www.sritalent.com
Strom Aviation Incorporated
P.O. Box 460328
Aurora, CO 80046
303/740-7400, 800/377-9246, FAX 303/740-7414
www.stromaviation.com
Strom Engineering Corp.
10505 Wayzata Boulevard
Minnetonka, MN 55305
952/544-8644, 800/205-8732, FAX 952/544-2451
www.stromengineering.com
STS Engineering Solutions LLC
2000 NE Jensen Beach Blvd
Jensen Beach, FL 34957
Phone & FAX 877/707-5767
www.stsengineering.com
Superior Group
250 International Drive
P.O. Box 9057
Williamsville, NY 14231-9057
716/929-1400, 877/573-6016, FAX 716/633-2026
www.superiorjobs.com
—
additional Superior offices:
Houston, TX
Reston, VA
Orlando, FL
San Jose, CA
Palm Bay, FL
West Chester, OH
Plymouth Meeting, PA
Woburn, MA
Superior Group
900 Circle 75 Parkway, Suite 740
Atlanta, GA 30339
770/850-8884, 888/850-8884, FAX 877/683-8657
Superior Group
19515 North Creek Parkway, Suite 220
Bothell, WA 98011-8200
425/489-9020, 866/489-9020, FAX 425/489-1989
Superior Group
2550 N. Hollywood Way, Suite 303
Burbank, CA 91505-5021
818/846-1130, FAX 818/846-9713
Superior Group
6565 MacArthur Boulevard, Suite 200
Irving, TX 75039
972/680-9199, 800/568-9199, FAX 972/680-1228
Superior Group
426 N. 44th Street, Suite 400
Phoenix, AZ 85008
602/220-0877, 800/684-2418, FAX 877/218-1354
Talascend
321 Ballenger Center Drive, Suite 245
Frederick, MD 21703
301/644-5502, FAX 301/698-8919
www.talascend.com
Talascend
3800 Airport Boulevard, Suite 303
Mobile, AL 36608
251/341-0606, 800/572-7843, FAX 251/341-0351
www.talascend.com
TASC Technical Services
P.O. Box 1315
Plaistow, NH 03865
603/382-1114, 877/304-8272, FAX 603/382-2377
www.tasctech.com, email: [email protected]
TDM Technical Services
3924 Chesswood Drive
Toronto, ON M3J 2W6, Canada
416/777-0007, FAX 416/777-1117
www.tdm.ca, email: [email protected]
Technology Plus Inc.
3430 McKelvey Road, Suite I
Bridgeton, MO 63044
314/298-8887, 800/910-5554
www.tplusinc.com
Technology Plus Inc.
P.O. Box 439
Valley Head, AL 35989
256/657-7425, 800/233-3449, FAX 816/795-7752
www.tplusinc.com
Tech Resources LLC
537 Warren Avenue
St Louis, MO 63130
314/862-2090
Tech USA LLC
8334 Veterans Highway
Millersville, MD 21108
410/846-9020, FAX 410/729-4341
www.techusa.net
TES-The Employment Solution
6600 TransCanada Highway, Suite 340
Pointe-Claire QC H9R 4S2, Canada
514/426-0121, FAX 514/426-1790
www.tes.net, email: [email protected]
The Talley Group Inc.
2507 147th Place SE
Mill Creek, WA 98012
425/753-5061, FAX 425/645-7845
www.thetalleygroup.com
Total Technical Services
315 College Farm Road, 2nd Floor
Waltham, MA 02451
781/899-4494, 800/776-0562, FAX 888/887-6285
www.total-tech.com, email: [email protected]
Triad Worktek
23801 Calabasas Road, Suite 2022
Calabasas, CA 91302
818/222-6811, 800/820-6811, FAX 818/222-0116
www.worktek.com
TriMech Services LLC
4461 Cox Road, Suite 302
Glen Allen, VA 23060
804/257-9965, FAX 804/257-7945
www.trimechservices.com
Two Roads Professional Resource Inc.
5122 Bolsa Avenue, Suite 112
Huntington Beach, CA 92649
714/901-3804, 877/4-2ROADS, FAX 714/901-3814
www.2roads.com, email: [email protected]
Universal Software Corporation
20 Industrial Park Drive
Nashua, NH 03062
603/689-2623, FAX 603/598-0739
www.universal-sw.com, email: [email protected]
USA-Universal Services Associates Inc.
500 Ellis Avenue
Colwyn, PA 19023-2725
610/461-0300, 800/724-6120, FAX 610/461-0405
www.buildwithusa.com, email: [email protected]
Volt Services Group
(please see our display ad and online banner)
1002 15th Street SW, Suite 212
Auburn, WA 98001-6502
253/733-3060, 888/307-4243, FAX 253/838-1384
www.jobs.volt.com
—
additional Volt Services Group offices:
Fort Worth, TX
San Diego, CA
Orange, CA
Wichita, KS
Phoenix, AZ
Windspeed Technical Solutions LLC
2615 W Casino Road, Suite 4B
Everett, WA 98204
425/329-2655, 800/568-0556
www.windspeedtech.com
Yoh Services
14323 S Outer 40, Suite 484
Chesterfield, MO 63017
314/878-0666, 800/298-0666, FAX 314/878-3313
www.jobs.yoh.com
—
additional Yoh offices:
Bellevue, WA
Westminster, CO
Phoenix, AZ
Zoom Technical Services Inc.
300 Trade Center, Suite 2600
Woburn, MA 01801
781/305-8000, FAX 781/240-5550
www.zoomtechnical.com
JOBLINES – Continued from Page A-2
Assignment
Location
Contract Firm/
Office to Contact
Manufacturing Engineer—analyze ECN for BOM updates
Manufacturing Engineer—entry level/US citizen
Manufacturing/Process Engineer—box builds/MES/SAP
Mechanical Assembler/Technician—read drawings
Mechanical Engineer—aircraft completions
Mechanical Engineer—gas processing
Mechanical Project Engineer—capital project processes
Methods Engineer—SAP/3D graphics software
Numerical Control Programmer 3—MCD
Organization Effectiveness Coordinator
Piping Design—field/AutoCAD/refinery a must
Piping/Steel Dept Manager—AutoCAD, Bentley AutoPlant
Power Electronic Design Engineer
Pro/E Electrical Engineer—Pro/E/Visio
Process Engineer—industrial
Process Engineering Manager—PE
Process, Material & Component Analysis
Procurement Administration—supplier management
Procurement Analyst—supplier management
Project Managers/Engineers—chemical or pulp/paper
Quality Engineer
Quality Engineer
Quality Engineer—engineering drawings/specifications
Quality Engineering Technician—US citizen only
Sr Developer
Sr Electrical Engineer
Sr Electrical Engineer
Sr Embedded Software Engineer—RTOS/BIOS
Sr Facilities Engineer
Sr Hardware Engineer—fly-by-wire
Sr I/E Engineer—chem/petrochem plant facilities design
Sr ISC Project Management Specialist
Sr Level Instrument & Electrical Designer
Sr Manufacturing Engineer—AME/factory/sourcing
Sr Piping Designers—Plant 3D/industrial plant const
Sr Piping Designers—heavy industrial construction
Sr Process Engineers—chemical/petrochem or pulp/paper
Sr Stress Analyst—sheet metal/honeycomb structures
Structural Analysis Engineer
Structural Designer—wastewater/industrial/AutoCAD
Structural Engineer—prefer chemical or pulp/paper
Structural Engineer—stress
Structural Engineers—5+ yrs chemical-refinery/STAADPro
Structures Manufacturing Engineer—SAP
Systems Engineer—787 electric power generating sys
Technical Trainer
Truecourse System Engineer
VMWare Engineer—ESX 2.x/V13 vSphere
Tucson, AZ
Rome, NY
Adecco/San Diego
Santa Clarita, CA Triad Worktek/Calabasas
Baltimore, MD
GAS/Lakeville
Wichita, KS
Choson/Wichita
Houston, TX
Alvin, TX
Wichita, KS
Choson/Wichita
Charleston, SC Volt/Auburn
Ft Worth, TX
El Paso, TX
Canton, GA
Phoenix, AZ
Butler America/Santa Ana
Florida
Lake Geneva, WI Ingenium/Rockford
Odessa, TX
Kinston, NC
Foster/Wichita
Tulsa, OK
Foster/Wichita
Tulsa, OK
Foster/Wichita
Birmingham, AL Tech Plus/Valley Head
Everett, WA
Inconen/Culver City
Troy, AL
National Engrg/Portsmouth
Wichita, KS
Choson/Wichita
Phoenix, AZ
Adecco/San Diego
Tempe, AZ
Volt/Phoenix
Renton, WA
Midcom/Anaheim
Renton, WA
Rochester, NY Nesco/Lake Mary
Santa Fe Spgs, CA Multax/Manhattan Beach
Phoenix, AZ
Carlsbad, NM
Urbana, OH
Alvin, TX
Urbana, OH
Greenville, TN
Appleton, WI
Agente/Colleyville
Mesa, AZ
Midcom/Anaheim
Norcross, GA
Dallas, TX
Multax/Manhattan Beach
Birmingham, AL SDS Resources/Birmingham
Wichita, KS
Foster/Wichita
Rockford, IL
Marietta, GA
Grand Rapids, MI Butler America/Shelton
Morgantown, WV Apollo/Glen Burnie
ABBREVIATIONS AND TERMS
Anticip: Anticipated. Openings are anticipated at this time
ASAP: As soon as possible. Openings exist now
Contr-Dir: Assignment begins on contract basis and can become direct position
DOE: Depending on experience
Immed: Immediately. Openings exist now
Indef: Indefinite. Expected duration of assignment unknown; probably Long Term
LT: Long Term (expected assignment duration 6-12 months)
Rate
Per
Diem
Overtime
Expected
Duration
Expected * See
Start Date Page
—
18.75/hr
open
open
DOE
—
—
DOE
59/hr
40/hr
—
—
65+/hr
open
—
—
36.80/hr
22/hr
31.50/hr
—
40-54/hr
40/hr
30/hr
32/hr
30.76+hr
49/hr
42+/hr
40-50/hr
52.50/hr
48-50/hr
—
51.50/hr
—
42-44/hr
—
—
—
—
50/hr
—
—
60/hr
—
42/hr
open
37/hr
44.98/hr
160K
poss
no
poss
split
split
—
—
split
split
poss
split
split
split
split
no
—
poss
no
no
split
poss
split
split
no
—
—
—
no
yes
poss
split
—
—
poss
split
split
split
split
—
—
split
yes
—
poss
split
poss
poss
—
poss
poss
poss
yes
poss
—
—
poss
—
poss
—
—
—
poss
poss
—
poss
poss
poss
—
poss
yes
poss
poss
—
—
—
poss
poss
—
—
—
—
no
yes
—
—
poss
—
—
—
yes
—
poss
poss
poss
poss
—
LT
6 mos+
LT
12 mos+
LT
LT
LT
LT
10 mos+
1 year
6 mos+
—
6 mos+
LT
LT
direct
4 mos+
5-6 mos+
6 mos
—
6 mos
1 year+
LT
6 mos+
1 year+
7 mos+
9 mos
6 mos+
1 year
6 mos
—
9 mos
—
9 mos
LT
6 mos+
—
6 mos+
12 mos+
—
LT
6 mos+
—
6 mos+
6 mos+
1 year
LT
direct
ASAP
ASAP
ASAP
ASAP
ASAP
—
—
—
ASAP
Now
ASAP
—
ASAP
ASAP
ASAP
—
ASAP
ASAP
ASAP
—
ASAP
ASAP
ASAP
ASAP
—
—
—
ASAP
ASAP
ASAP
ASAP
Sept 30
—
ASAP
ASAP
—
—
ASAP
—
—
—
ASAP
—
ASAP
1-2 wks
Now
ASAP
Soon
12
Index
13
Index
Index
Index
Index
Index
Front
Index
Index
Index
9
13
Index
Index
Index
Index
Index
Index
7
Back
Index
Index
Front
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
Index
9
12
Negot: Rate range may have been determined, but your rate is to be negotiated
Ongoing: Client expects openings for this discipline on an ongoing basis
Open: The rate for this assignment has not yet been set
Poss: Possible (normally refers to overtime or per diem)
Prob: Probable (normally refers to overtime or per diem)
Split: Firm will split a portion of hourly rate into per diem (if you meet IRS reqmt)
ST: Short Term (expected assignment duration less than 6 months)
StTm/OT: Straight time for overtime
VLT: Very Long Term (expected assignment duration over 12 months)
C.E. Weekly September 11, 2013 – A-3
ELECTRONIC
SUBSCRIBER SERVICES
Searchable Jobs Database:
Every current job published in C.E. Weekly is included in a
searchable database online at ContractJobHunter.com.
Searches of our jobs database can be made by keyword,
job location or posting date.
EZjobs Service:
Subscribers with an email address can have our computer
search each day’s new job postings for matches to their
pre-set keywords. At the end of the day, those listings are
emailed to subscribers complete with the name of the
recruiting firm, contact information, and all of the data in
our files about each job.
Free Email Box:
We provide free email boxes to CJHunter and C.E. Weekly
subscribers. The restrictions to this service are:
• Any single document (sent or received) cannot exceed
500K
Daily Resume Distribution:
When a new resume is added to our online database, the
subscriber can choose to have us email it to current
ContractJobHunter and C.E. Weekly advertisers.
Recruiters can choose to receive all new resumes, submit
keywords to receive only selected resumes, or receive no
resumes. Each time a resume is updated, the subscriber
can once again choose to have us email the updated
resume. The default is set to not distribute the resume,
only subscribers who check the box for distribution will
have their resume emailed. Resumes are emailed at the
end of each day.
Resume View Alert:
Every time a subscriber's online resume is viewed, downloaded or printed by a contract staffing firm... we immediately notify a subscriber by email. Included is the name of
the firm, the recruiter's name (if known), and contact information. Keep in mind that only subscribers with a current
email address on file can participate in this service.
• Total space allotted to any member is 5 megabytes
• Select your own personal email address. If the address
you choose is unavailable, you will be assigned another
and notified. We suggest using your name, for example:
[email protected]
• If your subscription lapses, email messages will not be
retained. You will no longer have an email box to read or
send messages.
For a free personal email box, apply online at
http://email.cjhunter. com.
E-Resume:
This service saves time whenever a subscriber does a job
search of our database. A subscriber simply checks a box
for every firm they wish to email their resume, then clicks
a single submit button. The subscriber’s online resume is
emailed automatically to all selected firms, with an
attached memo stating the specific job posting to which the
subscriber is responding. Subscribers can also review and
edit their online resume before submitting it.
Resume Email History Tracking:
Subscribers can track their resume forwarding history to
see when, and to whom, their online resume has been
emailed from our website in the past 30 days, through:
• Online Job Searches
• Daily Resume Distribution
Subscribers’ Message Board:
Subscribers can leave messages and questions for other
subscribers on this board. Discussed subjects have included: Insurance ... pre-employment drug tests ... and lots of
contractors looking for old friends.
Online Resumes:
C.E. Publications maintains an online resume database for
our subscribers that is available to all regular
ContractJobHunter and C.E. Weekly advertisers.
Recruiters can search resumes by keyword(s) and instantly
view, print or download them. Subscribers can view, edit
and upload their own resumes online. Text and formatted
resumes are stored, as well as an Online Profile. Keep
your online resume current. Only ContractJobHunter and
C.E. Weekly subscribers resumes are in this database.
To enter a resume:
• Upload resume at our website (no charge)
• Email to: [email protected] (no charge)
• Send resume on a disk or CD; ASCII text file or Word/WP
format (no charge)
• Submit scannable resume to us ($5 per page)
• C.E. inputs 1-2 job updates to existing online resume
($10)
Online Profile:
Individuals have certain requirements that do not generally appear on their resumes. Example: availability ... minimum acceptable rate ... location preference .. direct or only
contract jobs considered ... do you work on W2 or 1099,
etc. A personal profile allows you to make all of this information, and more, available to recruiters. Keep your profile current...especially the status of your availability! This
service is only as effective as the effort devoted to it by our
subscribers. As long as the majority of our subscribers
maintain their Online Profile, and keep the information current, this should be a very beneficial service to both our
subscribers and our advertisers.
C.E. Publications, Inc. • P.O. Box 3006 • Bothell, WA 98041 • 425/806-5200 • Fax 425/806-5585 • [email protected] • www.cjhunter.com
A-4 – September 11, 2013 C.E. Weekly
Contract Employment Weekly
E-RESUME
www.cjhunter.com
Mailing Address . . . . . . . . . . . . . . . . . .P.O. Box 3006, Bothell, WA 98041-3006
Overnight Deliveries . . .11711 N. Creek Pkwy. S., Suite 112, Bothell, WA 98011
Phone: (425) 806-5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fax: (425) 806-5585
Email Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [email protected]
Internet C.E. Weekly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .www.ceweekly.com
Internet ContractJobHunter . . . . . . . . . . . . . . . . . . . . . . . . . . .www.cjhunter.com
This is a very simple service to use
and can save a considerable amount
of time whenever you do a job search
of our database.
Publisher & Editor: Jerry Erickson • Managing Editor: Janice Erickson •
Staff: Greg Erickson (Director of Operations), Scott Schultz (Systems
Administrator), Marian Martin, Karen Dennis, Carol Fowler, and Steve
Edmunds
Some jobs advertised in C.E. Weekly are for upcoming or anticipated openings,
or may be filled before you respond to the advertiser. Please notify us if you find
a firm advertising upcoming positions as “Immediate.” For subscriber online
access, please contact our office for a UserID and Password.
With E-Resume, all a subscriber
needs to do is check a box for every
firm to whom you want your resume
emailed, then click a single submit
button. Your online resume will be
automatically emailed to all selected
contract firms, with an attached memo
stating the specific job posting to
which you are responding. You will
also be able to review and edit your
online resume before submitting.
Contract Employment Weekly (ISSN 1063-9268) ©Copyright 2013 C.E.
Publications, Inc. Published and airmailed every Wednesday. Most job
openings are for short or long term contract (temporary) assignments. There
should never be a fee to apply for or accept any of the jobs published in C.E.
Weekly. Direct (captive) positions advertised must meet the following
criteria: (1) be for a position with the advertiser’s client (unless it is for
recruiting related staff); and (2) must be identified as “direct.” If you wish to
apply for any position advertised, send a copy of your current resume to the
advertising firm, not to Contract Employment Weekly or C.E. Publications.
C.E. Weekly is not intended as a legal reference. Any specific problem
should be referred to your attorney or accountant. All material submitted to
C.E. Publications is subject to acceptance by the publisher. Advertisers,
authors and cartoonists agree to indemnify the publisher from any claims or
lawsuits for libel, violation of rights, copyright infringement or other suits
predicated on the content of copy submitted. No part of this publication may
be reproduced or transmitted in any form by any means, electronic or
mechanical, including photocopying, recording or by any information storage retrieval system, without written permission from the publisher. All
returned checks subject to $5 handling fee. We reserve the right to refuse
services to anyone. Services subject to change. Subscription must be current to use our services. Sorry, no refunds.
Contract Employment Weekly
◆
ContractJobHunter
All print subscriptions also include online access for full duration at CJHunter.com
(For Washington state add 9.5% sales tax)
Rates to U.S. addresses:
❑ 1 Year (with 52 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . . .$50
❑ Seniors renewal only (for seniors 62+ with proof of age) . . .$45
❑ 2 Year (with 104 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . .$90
❑ Seniors renewal only (for seniors 62+ with proof of age) . . .$80
❑ 12 Weeks (with 12 print issues) . . . . . . . . . . . . . . . . . . . . . . . .$30
❑ Current Single Issue of C.E. Weekly . . . . . . . . . . . . . . . . . . . . .$4
Last Name __________________________________________________
❑ 1 Year Online-Access Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25
❑ 2 Year Online-Access Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40
Rates to Canada or Mexico addresses:
❑
❑
❑
❑
1 Year (with 52 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$60
2 Year (with 104 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$110
12 Weeks (with 12 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . .$35
Current Single Issue of C.E. Weekly . . . . . . . . . . . . . . . . . . . . . . .$5
First Name _______________________________ Middle Initial______
UserID AND PASSWORD FOR ONLINE ACCESS:
(Case sensitive, choose 4-14 alpha/numeric characters – no symbols)
Home Phone _______________________________________________
UserID
Cell Phone _________________________________________________
Password ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Address ______________________________________ Apt _________
City ____________________________ State _____ Zip ____________
Email________________________________________________________
❑ cash/check/money order
❑ MasterCard/Visa/Amex
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Payment may be made in U.S. dollars drawn on a U.S. bank, MasterCard,
Visa or Amex, U.S. cash, or a Bank Draft from foreign bank. All issues are sent
1st class or airmail. We do not bill for any services or publications. We mail the
current issue the same day payment is received. Consecutive issues only. No
refunds. Mail to: C.E. Publications, P.O. Box 3006, Bothell, WA 98041.
Account # __ __ __ __ / __ __ __ __ / __ __ __ __ / __ __ __ __
Signature _________________________________________________________
Card Expires __ __ / __ __
DO NOT WRITE IN THIS SPACE
RELEASE INFORMATION: If someone calls C.E. Publications and asks for me specifically by my name, I authorize you to
release the above information to: ❑ Anyone ❑ Contract Firms Only ❑ No One* (*If you specify “No One”, you will not be
able to use the C.E. Locator Service or print C.E.’s address/phone number on your resume)
CE Publications, Inc.
PRESORTED
FIRST-CLASS MAIL
U.S. POSTAGE PAID
BOTHELL, WA
PERMIT NO. 117
P.O. Box 3006
Bothell, WA 98041-3006
FIRST-CLASS MAIL
We Offer:
• Direct Deposit
• 401(k)
• Per Diem
• Referral Fees
www.natleng.com
NATIONAL ENGINEERING SERVICE CORPORATION
National Recruiting Center -
DIAL 1-800-JOB-FIND
72 Mirona Road, Portsmouth, NH 03801 • Email: [email protected]
Call: 603/431-9740 • Call Toll Free: 800/562-3463 • Fax: 603/427-0573 • Fax Toll Free: 800/637-2562
MANUFACTURING *** POWER *** OIL & GAS
FIELD & OFFICE LOCATIONS: MA / CA / MI / AZ / WI / KS / NC / VA / PA / FL / NH / IL
CIVIL ENGINEER-Develop a plan to mitigate the long term effects of groundwater degraPRODUCT & MACHINE DESIGNER-Tooling design, injection molding equipment,
dation on underground structures and equipment to sustain long term plant operations
GD&T, detail drawings in 2D and 3D using AutoCAD, Pro/E, UG NX
TEST/VALIDATION ENGINEER-Responsible for all aspects of the test and validation of
PIPING DESIGNERS-Review and update P&IDs, design equipment layouts on industrial,
the automotive systems (fuel / transmission / suspension) LabView
chemicals, refinery and specialty chemicals (cryogenics), utility piping using Microstation/PDS
ELECTRICAL ENGINEER-Substation engineering including detailed physical design for high
PROJECT MANAGERS-PMP cert and PMI trained (Nationwide)
voltage substation projects through 345kv. Depending upon complexity of the project, candidate
PLANNERS/SCHEDULER-Primavera products (P3, P4 & P6) being the primary tool used.
may prepare, provide guidance or assist in preparing and developing the engineering deliverables Command control of schedule development, maintenance, structure and process
such as transformers, distribution systems, doing the associated load calcs, and working with
PROCEDURE WRITERS-Systems and procedure knowledge, read modifications, complete
SKM: ETAP, ArcFlash and relay protection
tech review, assess impact and necessity for procedural changes or updates
ELECTRICAL DESIGNER-Must have exp in power plants and oil/gas facilities. Must be
PIPE SUPPORT ENGINEER & DESIGNER-Pipe support modeling using PDS support
capable of locating equipment in a 3D envir as well as design using Microstation and PDS
modeler, Pelican Forge, Microsoft Word, 3D CAD skills, Intergraph PDS 3D, Microsoft Excel,
FACILITY DESIGNER-Heavy industrial buildings, plant layout using Microstation, PDS, 2D
Access, Pelican Forge Support Modeler and Microstation
& 3D, working with raceways and cable tray
PIPE STRESS ENGINEER-Knowledge of strengths of materials, specialty support design,
HEALTH & SAFETY SPECIALIST-Responsible for implementing and/or administering
fluid dynamics, corrosion principles, piping vibration and competency with Caesar II stress
safety, health, environmental protection and substance abuse prevention programs affecting
analysis software
employee and public safety, occupational heath. fire protection and prevention, and equipment
QUALITY ASSURANCE ENGINEER-QA/QC procurement activities during the execuand property protection. DOE/NRC regulations
tion of a major intl nuclear power plant project. Implement programs to oversee and monitor
HVAC ENGINEER & DESIGNER-Piping, layout, design, mechanical duct work, design
progress and success during execution of the project
and installation, plumbing and fire protection with various CAD systems. Support calculations,
SECURITY SYSTEMS-Design, develop and coordinate implementation of both LT and ST
analysis, studies, equipment specifications/data sheets
including supporting technology and monitor these policies, procedures and technologies, once
INSTRUMENTATION & CONTROL ENGINEER-Review and prepare I&C engineering implemented, to ensure compliance
and design calculations and provide design recommendations. Must adhere to applicable codes,
STARTUP ENGINEER-Facilitate the process review of test data
standards and procedures. Working with MCC, LabView and PCB layout for programmable
STRUCTURAL ENGINEER-Preparation of structural engrg calcs for steel structures
control circuits and drives
and/or foundations. This includes basic analysis, design calculations, equipment research,
INSTRUCTORS/TRAINERS-Develop lesson, Power Point slides, and teach training classes
sketches, etc. required to prepare documents, specs, drawings or to meet other project reqts
for the water treatment operators. Must have certification
VESSEL ENGINEER-Develop eqpt designs using validated and verified special application
MECHANICAL ENGINEER-Components for vessels, tanks and pumps
SW (Compress or equiv) and perform dynamic eqpt analyses and consider effects of tank
MECHANICAL ENGINEER-Nuclear licensing background for all plant systems
sloshing. Familiar with ASME boiler & pressure vessel code
Texas & Gulf Coast Area
4715 Strack Road, Suite 200, Houston, TX 77069 • Email: [email protected] or [email protected]
Call: (281) 537-9103 • Toll Free: 800/765-7499 • Fax: (281) 537-9169
** Must be US Citizen or Perm Resident / Green Card Holder **
E/I DESIGNERS-PDS, SmartPlant, AutoCAD exp, 7-15+ yrs exp, refinery/petrochem industry exp
a must - Houston/Corpus Christi, TX / Baton Rouge, LA / St Paul, MN
PROJECT MANAGERS-7-15 yrs exp in refinery, chemical, pipeline industries. BS degree Houston/Corpus Christi/Port Arthur, TX and St Paul, MN
VESSEL DESIGNERS-10+ yrs pressure vessel design exp, extensive fabrication exp required,
AutoCAD a must, Inventor a plus - Houston, TX
HYDRAULIC ENGINEER-BS degree required, subsea equipment/hydraulic design
exp a must, drilling/production control systems design exp, 5-10 yrs exp - Houston, TX
PROCESS / PROJECT ENGINEERS-BS degree, 7-15 yrs exp, multiple disciplines needed
including LNG, chemical/petrochem, refining - Houston/Corpus Christi, TX and St Paul, MN
SUBSEA ENGINEERS-6-15+ yrs exp, BS degree, exp needed in the following subsea areas:
controls, pipeline, materials, connectors - Houston, TX
PRODUCT / DESIGN ENGINEER-BS degree a must, 4+ yrs exp in an engineering
environment, manufacturing, fabrication, hydraulic couplings exp - Stafford/Houston, TX
MECHANICAL ENGINEERS-BS degree, 7-15+ yrs exp needed in the following: Heat
transfer, rotating equipment, subsea connectors, pipeline - Houston, TX
I/E ENGINEERS-7-15+ yrs exp, BS degree a must, oil and gas, petrochem, refining, pipeline
industry exp needed, specs, sizing control valves - Houston/
Beaumont, TX and New Orleans/Baton Rouge, LA

design engineer - Contract Employment Weekly

Transcription

Similar documents

now hiring - Contract Employment Weekly

application for parts and service account

e4de uee4 OPPORTUNITIES FOR MEP

Ohio Casualty Insurance Company West American Insurance

now hiring - Contract Employment Weekly

PRICE TOTAL $ FIBA Shot Clock *pair

2012-04-11 - Contract Employment Weekly

design engineer - Contract Employment Weekly

IIEE Code of Ethics - Institute of Integrated Electrical Engineers of

F300 MFP Specifications

the program brochure

medical vision group

Session C14-Preparing Your Students for Career in Energy