HDE-2H/2S-QAM - Blonder Tongue

HDE-2H/2S-QAM
MPEG-2 HD ENCODER
2xHDMI/2xHD-SDI/4xCOMPONENT
E
N
C
O
D
4xQAM
HDE-2H/2S-QAM (MPEG-2 HD Encoder – 2xHDMI/2xHD-SDI/4xComponent – 4xQAM) accepts up to four (4) high-definition
(HD) programs from any of the following inputs: 2xHDMI (unencrypted), 2xHD-SDI, and 4xComponent. MPEG-2 encoded outputs are
available in the following formats simultaneously: 4xQAM, 4xGigE (1000Base-T Ethernet), and 4xASI.
To improve transport efficiency, the encoder allows operator to (i) assign one (1) or two (2) programs to each QAM output channel,
and (ii) to individually turn on/off each of the four (4) adjacent QAM output channels.
The encoder supports Dolby® Digital audio encoding, and Closed Captioning (EIA-608 and EIA-708). It is also equipped with an Emergency
Alert System (EAS) interface. A front-panel RF test point allows for monitoring/testing of the QAM output without service interruption.
Comprehensive remote monitoring and control is accomplished using any standard Web browser via a front-panel 10/100Base-T
Ethernet connection.
2xHDMI + 2xHD-SDI + 4xComponent
E
EAS
(4 Inputs Total)
R
C
O
L
(4 Programs)
4xASI 4xGigE
L
E
C
T
I
O
N
HD MPEG-2 Encoding
Dolby® Audio Encoding
4xAdjacent QAM
Features
• Accepts up to four (4) programs from any of the following inputs: 2xHDMI (unencrypted), 2xHD-SDI, and 4xComponent
• Simultaneously delivers the following outputs: 4xQAM, 4xGigE, and 4xASI
• Multiplexes up to four (4) input programs in any of the following output combinations:
(i) 1:1 (1 program per QAM channel)
(ii) 2:1 (2 programs per QAM channel, not exceeding 38.8Mbps)
• Each of the four (4) QAM channels can (i) contain 1 or 2 programs, and (ii) be turned on/off individually
• Provides +52 dBmV QAM output level for four (4) combined channels (+60 dBmV for 1 QAM)
• Provides comprehensive GUI-based monitoring and control via standard Web browsers
• Supports Closed Captioning EIA-608 and EIA-708
• Equipped with EAS interface (Analog Video + L/R Audio)
• Supports Real-time Dolby® Digital audio encoding
• Supports user-defined PSIP configuration
Ordering Information
Model
HDE-2H/2S-QAM
Stock # Description
6379
MPEG-2 HD Encoder; 2xHDMI + 2xHD-SDI + 4xComponent inputs; 4xQAM + 4xGigE + 4xASI outputs; EAS compatible
Rev. No: 120605
Specifications
INPUT
HDMI
HD-SDI
OUTPUT
Connectors:
Video Resolution:
HDCP Encryption:
Audio:
2x HDMI
480i, 720p, & 1080i
Not supported
Embedded PCM and pass-through Dolby® Digital only
Connectors:
Standard:
Video Resolution:
Audio:
2x BNC
SMPTE 292M
480i, 720p, & 1080i
Embedded PCM and pass-through Dolby® Digital only
Component
Connectors: 4 sets each 3x RCA for Video (Y, Pb, Pr)
4 sets each 2x RCA for Analog Audio (L, R)
4 sets each 1x RCA for Digital Audio (PCM)
Video Resolution: 480i, 720p, & 1080i
Video Aspect Ratio: 4:3 & 16:9
EAS (Emergency Alert System)
Connectors: 3x RCA (Video, Audio L & R)
Trigger Mechanism: 5-12 VDC & Dry Contact Closure (Terminal Strip)
Encoding Profile
Video
Audio
Output Format:
Chroma:
Resolution:
Frame rate:
Aspect Ratio:
GOP Structure:
Transport Rate:
Video Bit Rate:
Video Pre-filter:
Intra DC Precision:
Color Space:
MPEG-2 HD MP@ML; ISO 13818-2
4:2:0
720x480i; 1280x720p; 1920x1080i
29.97 fps (1080i); 59.97 fps (720p)
4:3 & 16:9
I & P frames (user-selectable)
Variable (user-selectable)
Variable (user-selectable)
Variable (user-selectable)
Variable; 8-11 bit (user-selectable)
YCbCr and RGB
Output Format: Dolby® Digital
Sampling rate: 48 kHz
Bit rate: Variable; 96 - 448 Kbps (user-selectable)
Closed Captioning
HDMI: EIA- 608; 4x RCA (CC IN)
HD-SDI: EIA- 708; Embedded in HD-SDI input
Component: EIA- 608
QAM
Connector:
Modulation:
Standards:
DVB Symbol Rate:
Frequency Range:
Tuning:
Channels’ Bandwidth:
RF Level:
RF Level Accuracy:
Frequency Tolerance:
Frequency Stability:
Amplitude Flatness:
Phase Noise:
Spurious:
Broadband Noise:
Impedance:
Spectral Inversion:
Carrier Suppression:
Return Loss:
Signal-to-Noise Ratio (SNR):
MER:
I/Q Phase Error:
I/Q Amplitude Imbalance:
ASI
1x “F” Female (rear panel; up to 4x RF QAM ch. combined)
QAM 16, 32, 64, 128, and 256
ITU-T J.83; Annex A and B
Variable; up to 7 MSymbol/sec (MBaud)
54 to 1002 MHz
CATV Channel Selectable (Ch. 2 to 158)
24 MHz (4x Adjacent 6MHz)
+42 to +52 dBmV, 1 dB increment (4 ch. combined)
+46 to +56 dBmV, 1 dB increment (2 ch. combined)
± 1 dB
± 0.5 kHz @ 77 °F (25 °C)
± 5 kHz over 32 to 122 °F (0 to 50 °C)
± 0.25 dB (over 6 MHz channel)
-98 dBc (@ 10 kHz)
-57 dBc
-70 dBc (@ +52 dBmV output level, 5.5 MHz bandwidth)
75 Ω
Auto Recognition
45 dB
14 dB typical
40 dB typical
40 dB typical
Less than 1 degree
Less than 1%
Connectors: 4x BNC (Front-panel)
Output Assignment: 4 output programs can be assigned as follows:
No. of SPTS
4
3
2
0
No. of MPTS
N/A
N/A
1 (2 progs.)
2 (2 progs.)
Connectors used
(user-defined)
1,2,3,4
1,2,3
1,2,3
1,2
Format: DVB-ASI
Standard: ETSI EN 50083-9
GigE
Connector:
Standard:
UDP/RTP:
Address Assignment:
1x RJ45 (Front-panel)
1000Base-T Ethernet
Supported (user-selectable)
4x IPv4 addresses & port numbers (user-selectable)
General
Dimensions (W x D x H):
19.0 x 18.125 x 1.75 inches (483 x 460 x 44 mm)
Power:
115-230VAC, 60/50Hz (Fuse:3.0A, 250VDC, Slo Blo)
Power Dissipation:
60 W
Weight:
8 lbs (3.6 kg)
Operating Temperature:
32 to 122 °F (0 to 50 °C)
Storage Temperature:
-13 to 158 °F (-25 to 70 °C)
Operating Humidity:
0 to 95% RH @ 35 °C max, non-condensing
Storage Humidity:
0 to 95% RH @ 35 °C max, non-condensing
Alarms/Monitoring/Control
Local Monitoring: 8x Input Status LEDs (Video 1-4; Audio 1-4)
1x “F” Female RF Test Port
1x Encoder LED
1x Power LED
Local Control: 1x IP Reset button
Remote Monitoring/Control: GUI-based menu via standard Web browsers
(1x RJ45 front-panel connector; 10/100Base-T)
Related Products
Model
HDE-4S-QAM
HD264-2S-IP HDE-ASI
SD10E-QAM
AV10E-QAM
Description
MPEG-2 HD Encoder; 4xHD-SDI + 4xComponent inputs; 4xQAM + 4xGigE + 4xASI outputs; EAS compatible; 1RU
H.264HD Encoder; 2xHD-SDI + 2xHDMI + 2xComponent inputs; 2xIP + 4xASI outputs; 1RU
HD/SD Encoder; 1xHD-SDI + 4xSD-SDI + 4xAV inputs; 1xASI output; 2RU
SD Encoder; 10xSD-SDI + 10xAV inputs; 1xQAM output; EAS compatible; 2RU
SD Encoder; 10xAV inputs; 1xQAM + 1xASI outputs; EAS compatible; 2RU
Blonder Tongue Laboratories, Inc. • One Jake Brown Road, Old Bridge, NJ 08857 • USA • 800-523-6049 or +1-732-679-4000 • www.blondertongue.com
©2012 Blonder Tongue Laboratories, Inc. All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.