Standard Nomenclature
Transcription
Standard Nomenclature
G-Beam Series GR2D-LENS General Illumination - Suspended or Wall Mount Variable Distribution Click or scan QR code to view latest spec sheet Click photo to view product page Page 1: Page 2: Page 3: Page 4: Page 5: Page 6: Revision Date: May 01, 2015 Gammalux Lighting Systems reserves the right to change details of fixture designs and construction at any time. Overview & Nomenclature Specifications Photometric Info / Downloads Mounting Details Standard Colors / Finishes Product Images Product Overview (for complete specifications, see page 2) Construction: Extruded aluminum housing is available in one piece up to 8' with just two points of suspension. Continuous runs have hairline joints with no light leak. Runs of fixtures can be built to match field conditions, including patterns. Electrical: Fixtures can be fitted with integral sensors and control interface devices (consult factory). Multiple dimming options available. Runs of fixtures are tested as a complete system prior to shipping. Optical: Lenses available in medium (ASLMD) and heavy (ASLHD) diffusion. Finish: High quality paint finish in high gloss or semi-gloss. Custom colors available. Packing and Shipping: Our packing, labeling and shipping systems ensure products arrive safely, ready to install. Standard Nomenclature 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275 Fax 909.599.5288 E-mail: [email protected] Gammalux products comply with ARRA Buy American requirements 1 G-Beam Series GR2D-LENS General Illumination - Suspended or Wall Mount Variable Distribution Specifications Construction Housing: Extruded aluminum body 2.50" diameter, 6063T5, 0.070" min thickness. In continuous runs, each housing is 8' max. All fixtures are built per approved factory drawings and tested as a complete system at the factory. Fixtures ordered as individuals cannot be joined together in the field. Lamp sockets are hidden behind solid socket covers. Joiner System: Automatic alignment, no loose parts, one tool to tighten two factory installed bolts for hairline seam. No light leaks. Lamping: Lamps are set inline, non-staggered. Factory-engineered drawings indicate the location of each lamp in continuous runs. Mounting: Aircraft cable is 7x7 stranded stainless steel with stopper fitting at the top end. Lower end strands are welded and ground for easy insertion into adjustable cable gripper (C). Feed cord is straight, white 3/C SVT or SJT #18 AWG. Stems are 3/8” schedule 40 pipe with top swivels (S). California UBC compliant stems with internal safety cables (SEQ). 1" x 2" rectangular wall bracket (WB) and wall rigid stem (WRS) allow 4" overall projection from wall. Electrical Static Ballast*: Osram Sylvania or equal Electronic Rapid Start with less than 10% Total Harmonic Distortion is default (ERS). 0-10V Dimming*: 0-10v dimming by Advance Mark 7 is default (ZTVF). Line Voltage Dimming*: Two-wire line voltage dimming by Advance Mark 10 is default (TWR). DALI Dimming: Dimming by generic DALI ballast (DALI). Lutron Dimming: Dimming by Lutron EcoSystem, wired for EcoSystem control (ECDE). Dimming by Lutron EcoSystem, wired for 3Wire control (ECD3). Dimming by Lutron EcoSystem H Series (ECH). Dimming by Lutron Hi-Lume 3D, wired for EcoSystem control (H3DE). Dimming by Lutron Hi-Lume 3D, wired for 3-Wire control (H3D3). Step Dimming: Step Dimming availability is contingent upon multiple factors. Consult factory (SDIM). On-board sensors and control interface devices may be specified (consult factory). Max ballast cross section size 1.0" x 1.2". Fixtures bear UL & cUL Dry Location label. Damp Location label available (DL). *Subject to availability. May be substituted by Gammalux. Components and specifications may be changed without notice. Optical Performance Reflectors: Shall be formed diffuse high reflectance aluminum. Acrylic Satin Lens, Medium Diffuse: Snap-in. Shall be 15% DR acrylic (ASLMD). Acrylic Satin Lens, Heavy Diffuse: Snap-in. Shall be 15% DR acrylic (ASLHD). Multiply efficiency by .73. See lens images on page 4. Finish Housing assembly is electrostatically sprayed with high solids aliphatic two component polyurethane to an average thickness of 2 mils. over acid etching primer. High gloss or semi-gloss are standard. Specify H for high gloss in Paint Finish field. Specify SG for semigloss. Consult with factory for other finishes. Packing and Shipping Fixtures built for continuous rows and patterns are given a specific location identifier, clearly identified on factory layout drawings provided to installing contractor. Location identifier is printed on the fixture's ID Label, protective wrapping and on each end of fixture carton. Shipping pallets are built with 2" clearance, extending beyond the length and width of cartons, providing shipping protection. Approx. weight of 4' module is 5 lbs. including carton. Weight of pallet and supplemental packing materials not factored in. 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275 Fax 909.599.5288 E-mail: [email protected] Gammalux products comply with ARRA Buy American requirements 2 G-Beam Series GR2D-LENS General Illumination - Suspended or Wall Mount Variable Distribution Photometric Info / Downloads 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275 Fax 909.599.5288 E-mail: [email protected] Gammalux products comply with ARRA Buy American requirements 3 G-Beam Series GR2D-LENS General Illumination - Suspended or Wall Mount Variable Distribution Mounting Details Factory Drawings: Fully dimensioned factory drawings will be provided upon receipt of purchase order. Gammalux Lighting Systems reserves the right to change the details of fixture design and construction at any time. 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275 Fax 909.599.5288 E-mail: [email protected] Gammalux products comply with ARRA Buy American requirements 4 G-Beam Series GR2D-LENS General Illumination - Suspended or Wall Mount Variable Distribution Standard Colors/Finishes Due to variances in computer monitors and color printers, this page should be used for general reference only. For a sheet of physical color samples, please consult factory. High Gloss Finish White (WH) Red (RD) Blue (BH) Black (BKH) Yellow (YH) Green (GH) OffWhite (OWSG) Semi Gloss Finish White (WSG) Silver (SSG) Gray (GYSG) LightGray (LGYSG) Bronze (BZSG) SatinAluminum (SAPSG) Due to variances in computer monitors and color printers, this page should be used for general reference only. For a sheet of physical color samples, please consult factory. 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275 Fax 909.599.5288 E-mail: [email protected] Gammalux products comply with ARRA Buy American requirements 5 G-Beam Series GR2D-LENS General Illumination - Suspended or Wall Mount Variable Distribution Product Images 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275 Fax 909.599.5288 E-mail: [email protected] Gammalux products comply with ARRA Buy American requirements 6