5410 - vermeer.com

®
5410
BALER
®
Series
Rollin’ & wrappin’ with the n
It doesn't get any easier or s
A
re you a Rebel? Looking to roll your own bales? On your own time? With your own baler?
Meet the new, improved, reinvigorated Vermeer
5410 Rebel Baler … the perfect balance of
simplicity, convenience, long-term reliability … a proven performer with millions of acres under
its belts … now with even more time-saving,
labor-saving advantages!
Now available with NetWrap!
Discover the difference NetWrap can make for your operation. Higher hay quality. More protection from moisture. Less hay loss in
storage. Better looking bales. Fast wrapping cycles. Less time in the
field. Lower fuel costs. Solid tightly packed bales that are easy to
transport and feed.
And, with Vermeer, it's so easy!
Welcome to Rebel Country!
Why wait!
It can take up to :45
seconds to wrap a bale
with twine. With Vermeer
NetWrap you can wrap up
a bale in less than
10 seconds!
This is the one that takes the guesswork and hassles out of
netwrap by feeding the net directly to the main belts. Simple.
Fast. Reliable. No rubber feed rollers. No clumsy feed belts.
No cutting knives that don't cut. The combination of brake
tension and friction feed not only makes it more user-friendly,
but it also (a) maximizes the number of bales per roll (b)
maintains tension on the wrap for a clean cut and positive
grip for wrapping the next bale and (c) it automatically
adjusts tension to the size of the netwrap roll. This is the
one you've been reading about … and made popular by the
high-volume producers and custom operators on top-of-theline Vermeer M Series Balers.
Simple hydraulic control
setting allows you to make
great looking bales at any
density; and it’s easy to access.
new 5410 Rebel Baler
®
simpler than this!
Hitch 'n go starts.
Ergonomically designed
Accu-Bale® Select Monitors
The 5410 features Vermeer’s exclusive
true-bottom drum design for fast
feeding, high-density bales. It’s sensibly
priced, and has fewer moving parts and
adjustments than others in the field.
Hydraulic/spring belt tension is easy
to adjust. And with the best HaySaver
Wheels (optional) in the field today
you’re better able to fill in the corners
for square-shouldered bales every time!
Low hp tractors …
and lower fuel costs.
With just a minimum 40hp tractor,
you're ready to roll, even in
heavy windrows!
Rapid drop 'n go baling.
Fewer hassles. Less stress on your
tractor. Because there's no need to
disengage and re-engage the PTO every
time you drop a bale. That's right!
You're ready to go as soon as the bale
chamber closes.
Positive bale ejection …
with a spring-loaded bale ramp
(optional). Split tailgate design
promotes quick, dependable bale
ejection.
Pick the bale size and twine-tie or
netwrap settings you want and you're
ready to go. It's automatic with overfill
protection, manual override and all the
user friendly adjustments you need …
with reliable weather-proof switches,
self-diagnostic lights on the switches
and robust wire harness connectors.
Manual electric control
allows you to operate twine tie and NetWrap functions without needing a bale monitor.
Prefer twine tie?
The new, robust electric center-pivot twine tie system
from Vermeer now features adjustable, dual feed slots
and a double power actuator for consistent reliable
performance. It’s simple to thread, easy to maintain.
And even if you run out of twine on one side, you can
still place twine across the full width of bale.
5 4 1 0 R E B E L S P E C I F I C AT I O N S
F E AT U R E S
Bale diameter:
Bale width:
Bale weight:
36" (.91 m) to 60" (1.52 m)
47" (1.19 m)
Up to 1,000 lbs. (454 kg), dependent on crop
F O R M I N G B E LT S
Number and width:
Number and length:
Belt tension system:
Six 3-ply MRT Clipper laces, 6" wide
Three (3) @ 409"; three (3) @ 419"
Spring/adjustable hydraulic
DRIVE SYSTEM
Driveline: Roller chain: Torque protection: Drive rollers: Idler rollers: Power:
80 degree CV, 540 RPM
60#
Radial pin clutch
Two 4.5" (11 cm) diameter, steel
3.5" (9 cm) and 5.5" (14 cm)
40 hp minimum (30 kW)
50 hp recommended (37 kW)
PICKUP
Width (chamber):
Width (inside flare):
Width (between outer teeth): Tooth bars: Number of teeth: Tine spacing: Stripper diameter: Drive: Lift: 47" (1.19 m)
58" (1.47 m)
43.5" (1.10 m)
Four (4)
32 rubber-mounted double tines
31/16" (7.8 cm)
12.62 in. (32 cm)
#60 roller chain
Manual standard; hydraulic lift (optional)
A U T O M AT I C T W I N E T I E S Y S T E M ( S TA N D A R D ) Twine Storage 4 Ball twine capacity
DIMENSIONS
Length: Height: Width: Weight: Drawbar weight: Tire size: 12' 10" (3.91 m)
8' 7" (2.62 m)
7' 11" (2.41 m)
4,700 lbs., (2132 kg) fully optioned
760 lbs., (345 kg), fully optioned
11L-15 or optional 31 x 13.5-15
NET WRAP (OPTIONAL)
Feed Mechanism:
Friction pan onto main belts.
(no rubber drive roller or net belts)
Net Tension:
Brake system varies tension to maximize
bales per roll of net.
Net Width:
Standard 48" (1.22 m) and
over-the-edge NetWrap 51" (1.30 m)
Check Out The
Complete Line of
®
5410
Standard Features:
Open
throat easy start design
Mechanical full bale, twine arm position and tailgate locked indicator
Clevis hitch
Four bar floating pickup
Mechanical pickup lift & height adjustment
Mechanical tailgate safety locks
Constant velocity PTO
Radial pin clutch protection
Adjustable pickup cam track & belt tracking
Bale Size Indicator
Rubber-mounted pickup tines
Four ball capacity twine storage
SMV sign
 Safety/highway transport lights
Electric twine tie system
Drop-n-Go bale ejection
Separated belt design for clean out
Options:
HaySaver
Wheels
loaded bale ramp
Accu-Bale® Select monitor
NetWrap system
High flotation tires 31x13.5-15 tires
Work lights
Hydraulic pickup lift
Fire extinguisher
AgVantage warranty
Spring
Every crop and every field condition presents challenges
different from those of last year, your last cutting, or last
night. We understand the costs, pressures and tight schedules
hay producers face today. And, we operate with the premise
that parts and service support doesn’t help tomorrow when
you’re in the field today. When it’s time to make hay, it’s time
to make hay.
LF8020 09/06 PP (10K) / PN#510505048
Rebel™ TM700 Trailed Mower
Rebel™ TR90 Tedder/Rake
Our goal is to be your primary resource in the field and
through our product support service teams. Our mission is to
provide you with a level of experience and expertise that goes
far beyond product knowledge, sales training and financing
programs. For us, hay equipment is not a sideline; it’s our
main line … one supported with parts, fast service and a
straight-talk approach that has made Vermeer hay equipment
customers some of the most loyal in the industry.
Rebel™ WR220 Rake
Rebel™ BP5000 Bale Processor
©2006 Vermeer Manufacturing Co. All rights reserved.
800-370-3659
BLADE RETENTION SYSTEM
For nearly 35 years, we have specialized in the production of
machines to harvest and manage hay. We pioneered the first
big round balers, introduced hydraulic twin-basket hay rakes
— and recently — innovative mowers, mower conditioners
and bale processors. We constantly strive to improve these
products and invent new ones.
Vermeer Manufacturing reserves the right to make changes in engineering, design, and specifications, add improvements, or discontinue manufacture
at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional accessories or components.

Hay Tools!
Innovative solutions and solid answers
based on experience in the real world.
VERMEER, VERMEER logo, Accu-Bale and Rebel are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries.
Vermeerag.com
™

PO Box 368

Pella, IA 50219