Bourgault 2012 Product Catalogue

Transcription

2012
BOURGAULT PRODUCT CATALOGUE 2012
TABLE OF CONTENTS
President’s Message
The Ultimate Seeding Package
Series 3320 PHDTM
3
4-5
6-23
5810 Air Hoe Drill
32-35
9400 Floating Hitch Chisel Plow
51
1200 Grain Cart
56
7950 Air Seeder
36-39
9800 Rigid Hitch Chisel Plow
52
Liquid Fertilizer Cart
57
6000 Series Air Seeders
40-44
Tillage Options
53
5925 Coulter Drill
57
45-47
6000 Mid Harrow
54
Bourgault Warranty
48-50
7200 Heavy Harrow
55
Mid Row Banders
24-27
X20
3710 Independent Coulter Drill
28-31
8910 Cultivator
®
TM
Monitor/Controller
®
58-59
PRESIDENT’S MESSAGE
by Gerry Bourgault,
P. E n g .
Bourgault is continuing to offer new, industry-leading technology to make the large, modern
farmer more efficient and productive than ever before. The new 3320 provides a good example
of Bourgault’s development efforts. The 3320 PHD™ offers the most advanced seed placement
technology in the industry. It is available in three models: 1) 3320QDA, 2) 3320XTC and
3) 3320SE. The 3320, equipped with the QDA (Quick Depth Adjust) feature, allows you to adjust the
Gerry, seated in the cockpit of Bourgault’s
experimental aircraft design - the latest product
development at Bourgault.
seeding depth in a few minutes, rather than taking up close to an hour, which is typically the case
with a large, independent opener air hoe drill.
Because of the unique geometry found on the 3320QDA,
rather than adjusting the setting of each seed opener to
change the seeding depth, changes are made to the frame
height, which in turn adjusts the seeding depth. On the
3320QDA, changing seeding depth takes you only 3 or
4 minutes instead of 50 minutes, which is generally the
case on a 75-foot independent opener drill. If it takes
50 minutes to change seeding depth to be able “to see
whether or not a different depth is better” and only 3 hours
for you to seed the entire field, because of the constant
urgency to complete seeding, often depth changes are not
made if you are unsure whether or not a depth change
would indeed improve seed placement. If the seeding
depth change is made, and you subsequently determine
that it produces less than ideal placement, now the depth
has to be reset back to the original setting, which takes
another 50 minutes. In that time, you could have seeded
more than 80 acres! However, if the seeding depth is too
great, time-to-emergence increases and plant stands are
generally reduced. If the seeding depth is too shallow,
some of the plants may become stranded in dry soil, which
can cause major problems with low plant numbers, timeto-maturity, weeds and ultimately, yield. The bottom line
is that over the long run, compromises to seed placement
will cost you money; in some years, a lot of money. The
technology developed for the 3320QDA allows you to avoid
having to make seeding depth compromises along with
providing the most precise seed placement in the industry.
Additionally, all 3320s feature hydraulically adjustable
packing pressure, which is likely the second most
important factor for obtaining proper emergence. Over
the long run, the technology found on the 3320QDA will
increase yields, crop quality and reduce time-to-maturity
providing you with best available bottom line.
The 3320XTC (eXtra Terrain Contouring) features enhanced
contouring capabilities where terrain changes are sharp
and numerous. If many of your fields include countless
sharp hills and draws, the 3320XTC may be the answer.
Although the 3320XTC does not allow seeding depth
changes to be made by changing the frame height, as
does the 3320QDA, its spring loaded depth adjustment
system makes setting the seeding depth very easy and
convenient.
When it comes to independent disk coulter drill technology,
Bourgault offers the 3710 with its patented walking axle
coulter arm technology. The 3710 provides unprecedented
and unmatched seed placement capabilities. When
compared to a conventional, fixed location gauge wheel
design, the walking axle design averages out localized
surface variations to reduce the number of seeds that
are deposited above and below the optimum seeding
depth. Most simply stated, when you have more seeds
deposited at the optimum depth, your chances of
maximizing yields increase.
Bourgault has also released the 7950 Air Seeder cart
with 950 bushels of total tank capacity. Besides being
large, this unit is equipped with the latest innovations
in air seeder cart technology.
As you review this catalogue, you will discover that
Bourgault is offering a host of industry-leading
technologies that can increase your bottom line. However,
what you may not appreciate from the catalogue is
Bourgault’s obsession with quality and durability. Bourgault
broke into the agricultural equipment marketplace in 1974,
by offering a cultivator that was guaranteed to outlast all
competitors by 50%, and guaranteed to require 50% less
maintenance and fewer repair parts. Since then, Bourgault
has consistently developed and manufactured tillage and
seeding products that delivered on this guarantee. If you
were to purchase Bourgault equipment, you would find that
Bourgault’s obsession with quality and durability is now
stronger than ever.
w w w. b o u r g a u l t . c o m
3
THE ULTIMATE
SEEDING PACKAGE
With seeding arguably
having the greatest impact
on your farming operation, it
is without question that time
should be taken to choose
the right seeding system for
your specific needs.
Bourgault offers a selection
of top seeding implements
so you can configure the
most profitable seeding
solution for your operation.
3320
Paralink
Hoe Drill
3710
Independent
Coulter Drill
Start by choosing from
several lines of industryleading seeding implements.
Regardless of your
conditions, there is a
Bourgault seeder for you.
5810 Air
Hoe Drill
Proven
Performer
Quick Seed
Depth Setting
8910
Cultivator
5925
Coulter Drill
Superior Performance
in Undulating Terrain
Add Bourgault MRBs
—providing optimal nitrogen
placement in a one-pass
operation with minimal
seedbed disruption.
Choose a Bourgault Air Seeder,
the most advanced air seeder in
the industry.
Select from a range of sizes and
options that offer unmatched
flexibility and durability.
7950
Air Seeder
6000 Series
Air Seeder
Finalize your system with a
Bourgault X20 VRC for userfriendly variable rate control
from an industry leader, or,
a 591 Monitor for complete
and accurate monitoring of
your seeding operation.
X20 Monitor
Controller
or
591 Monitor
The new Series 3320 PHD expands on the proven 3310 platform by enhancing existing features,
while offering new options that you can easily tailor to meet your specific farming requirements.
3320SE
Standard Edition
The 3320SE builds on the highly
successful Bourgault 3310 PHD by
incorporating the proven Paralink
Seed Opener Assembly with various
enhancements including the
hydraulically actuated MRBIII fertilizer
applicator option.
3320QDA
Quick Depth Adjust
Get the best of both worlds with the
3320QDA, the only independent depth
control drill on the market that offers
quick seeding depth adjustment.
Producers no longer need to put their
crops at risk with the old "set & forget"
practice. Precision and convenience is
now available with the 3320QDA.
3320XTC
eXtra Terrain Contouring
Achieve unprecedented seed depth
accuracy in challenging terrain. The
3320XTC is equipped with the new
Paralink XTC Seed Opener Assembly.
The XTC Seed Opener has a 1-to-1
opener gauge wheel ratio for exact seed
placement over ridge tops and through
water runs.
Basic Geometry of the Series 3320 PHD Openers:
XTC Opener
PHD Opener
1-to-1 Parallel Link
Trailing Arm Parallel Link 2-to-1
Packer/gauge wheel and seed shank move
together when depth is set.
The bottom arm of the PHD opener is
continuous from the packer wheel to the drill
frame.
If the packer/gauge wheel moves down, the
seed shank follows the same vertical distance.
If the packer/gauge wheel moves, the seed
shank travels half the vertical distance in the
same direction.
Changes to the vertical frame height do not
affect the position of the seed shank.
If the drill frame changes vertical position in relation
to the packer/gauge wheel, the seed shank travels
half the vertical distance in the same direction.
8
High Floatation
Caster Wheels
Optional MRBIIIs eliminate
the risk of fertilizer burn.
Sturdy 5" x 5" Three Row
Frame Construction
Hydraulic control of packer and
opener force from the cab.
FIVE YEAR
LIMITED WARRANTY
DURABLE DESIGN, SUPERIOR SERVICE
No other manufacturer can match Bourgault for
quality of design, durability of construction, and
after-market support of leading seeding systems.
tires on the main frame casters and 11L x 15FI
tires on the wing casters. Double-walking caster
wheels are standard on the main frame.
system is designed to require minimal hydraulic
draw during field operation and reduced lifting time
at the headlands.
The superior design of the heavy-duty 5" x 5"
three-row frame will ensure reliable service through
many seasons, and is backed with a 5 year limited
frame warranty.
Loading is transferred hydraulically from the
mainframe to the inner wings, and ballast is added
to the outer wings to ensure uniform penetration
through the entire width of the drill.
Bourgault offers the ability to select the seed
opener, and offers a range of packer options to
ensure best results with the opener selected.
Floatation is un-compromised, with 16.5L x 16.1FI
main frame caster wheels on 60' plus wide 5-plex
units with 13.5L x 15FI wheels on the wing walking
casters. The 50' and 40' units have 13.5L x 15FI
Series 3320 Paralink hoe drills incorporate seed
openers with durable cast Paralink arms that pivot
on lube-free bushings for a long life and extended
trouble-free operation. The advanced hydraulic
Bourgault Industries Ltd.
Bourgault, and our outstanding network of worldclass dealers, stand behind each Bourgault 3320,
providing outstanding after-sale service and
support on each unit.
S E R I E S 3 3 2 0 PA R A L I N K H O E D R I L L
9
Paralink design maintains the
opener's attack angle
Multiple Packer
Wheel Options
3320XTC shown above.
M A I N TA I N N A R ROW ROW S PAC I N G
Many farmers with competitors’ seeding systems are
forced to deal with residue bunching and plugging,
and the inevitable uneven crop emergence that
results. There has been some who promote seeding
with side-banding systems such as dual-knife or
double-shoot openers on 12" rows or greater.
Producers must be aware that side-band openers
used on wider row spacings endanger the seedbed
with excessive soil disturbance, reduced seedbed
utilization, and increased risk of fertilizer damage,
especially when used with variable rate control.
As with the original, the Series 3320 PHD offers
outstanding residue clearance in managed field
residue. Features such as a seed-only opener on
each shank, edge-on shank design, and residue
cutting MRB coulters provide excellent trash flow in
challenging conditions without having to compromise
seedbed utilization for a wider row spacing.
The success of operating at optimal row spacings
is proven by the fact that over 90% of the industry
leading 3310 PHD seeding systems were purchased
with 10" seed spacing.
10
REDUCED HYDRAULIC FLOW
You have full electricover-hydraulic control
of packing & opener
force from the seat
of your tractor. Set
packing force at a
low 70 lb up to over
200 lb of force. One click of the pressure control
toggle will adjust system pressure by 50 psi, which
translates into about 3.5 lb of packing force for the
3320XTC, and about 5 lb of packing force for the
3320QDA and 3320SE.
The hydraulic configuration on the 3320 PHD
efficiently utilizes the tractor’s hydraulic system,
resulting in minimal flow during the seeding
operation.
New for the 3320 PHD is the incorporation of a
1-¼" diameter hydraulic cylinder on both variations
of seed openers. These cylinders are ¼" diameter
smaller than found on the 3310 PHD, and will
reduce hydraulic requirements by up to 40%. This
leads to improved lift times in the headlands.
PACKER OPTIONS FOR THE 3320 PHD
It is critical to
match your
opener with the
right packer
wheel to suit your
requirements.




The 6-ply 4.8" pneumatic packer (with tube) can
be adjusted from 12 to 50 psi to meet a wide
range of seeding conditions with various openers.
(not shown)
The 4.5" V-Style semi-pneumatic provides a more
aggressive, narrow profile with excellent mud
shedding characteristics, and is commonly used
with narrow openers. (left)
The 4.5" semi-pneumatic provides a wide rounded
packing profile and is typically matched with a ¾"
to 2" wide opener. (middle)
The 5.4" semi-pneumatic provides a wide rounded
packing profile and is typically matched with a
2" to 4" wide opener. (right)
Please note that these are general guidelines and may not suit specific
requirements for every operation.
B O U R G A U L T M R B III
Bourgault Mid Row Banders have helped thousands of farmers achieve a profitable, one-pass seeding
operation by minimizing the risks by providing optimal fertilizer placement. The Series 3320 Paralink hoe
drills incorporate the MRBIII applicators on all three configurations so you can maximize your return each
and every season.
11
SERIES 3320PHD SPECIFICATIONS (SE, QDA , XTC)
MODEL
3320-40
3320-50
3320-60
3320-66
3320-76
3
5
5
5
5
10" spacing
40'0"
50'0"
60'0"
66'8"
76'8"
12" spacing
40'0"
52'0"
60'0"
68'0"
76'0"
Transport Width
19'5"
20'10"
24'4"
24'6"
25'1"
16'7"
16'1"
15'9"
17'5"
18'9"
10" w MRBIII
26,800 lb
33,800 lb
40,500 lb
45,500 lb
49,600 lb
12" w MRBIII
25,000 lb
31,000 lb
37,200 lb
41,850 lb
45,500 lb
No. of Sections
Working Widths
Transport Height
*Weight
(max)
(approx)
Tires
(available options: a = single wheel, b = dual wheel fixed, c = dual wheel pivot, d = dual wheel walking)
Main Frame Front 13.5Lx15FI (d)
Main Frame Rear
11Lx15FI (c)
Additional Specifications
Trip Assembly Travel
SE, QDA: + or - 6"
XTC: + or - 8"
Packing Force
In-cab adjustment from 70 to 200 lb
1 click = 50 lb system pressure
XTC Arm: 3.5 lb of packing force
16 lb of trip force
PHD Arm: 5 lb of packing force
14 lb of trip force
Depth Adjustment
SE: 1/6" incr., 0 to 2-½" range
QDA opener: 1/6" incr., 0 to 2-½" range
QDA frame adjust: 1/8" incr., 0 to 1-¼" range
XTC: ¼" incr., 0 to 3-¼" range
Packer Options
4.8" pneumatic (12-50 psi),
4.5", 5.4" round semi-pneumatic,
4.5" V semi-pneumatic
13.5Lx15FI (d) 16.5Lx16.1FI (d) 16.5Lx16.1FI (d) 16.5Lx16.1FI (d)
11Lx15FI (c)
13.5Lx15FI (c)
13.5Lx15FI (c)
13.5Lx15FI (c)
Inner Wing Front 11Lx15FI (b,d)
11Lx15FI (b,d)
13.5Lx15FI (d)
13.5Lx15FI (d)
13.5Lx15FI (d)
Inner Wing Rear
11Lx15FI (a,b)
11Lx15FI (a,b)
11Lx15FI (b)
11Lx15FI (b)
11Lx15FI (b)
Outer Wing Front
-
11Lx15FI (b,d)
13.5Lx15FI (d)
13.5Lx15FI (d)
13.5Lx15FI (d)
Outer Wing Rear
-
11Lx15FI (a,b)
11Lx15FI (a,b)
11Lx15FI (a,b)
11Lx15FI (a,b)
Front to Rear Wheel
SE: 191" with MRBIII/ 169" w/o MRBIII
QDA: 191" with MRBIII/ 191" w/o MRBIII
XTC: 191" with MRBIII/ 169" w/o MRBIII
Rear Drop Hitch (opt)
For pulling liquid or NH3 tanks with lower
hitch pull points
Further details on the
3320
QDA
found on:
p 12-19
* all weights and transport dimensions are estimates and are subject to change.
Farmers’ reqĐ
CHARACTERISTICS
Land Contouring
3320SE
PHD Opener
3320QDA
PHD Opener
3320XTC
SILVER
SILVER
GOLD
XTC Opener
Seeding Speed
GOLD
GOLD
SILVER
Soil Penetration
GOLD
GOLD
SILVER
COMMENTS
The 1-to-1 XTC opener provides optimal results in
hilly conditions.
The 2-to-1 PHD opener maximizes stability at
higher seeding speeds.
The PHD provides very consistent opener downforce for
variable soil conditions.
The 2-to-1 PHD opener stability is more consistent with
wider openers.
The single opener design maximizes residue flow on all
3320s.
The QDA is the only independent seed drill to offer quick
seed depth adjustment.
Opener Selection
GOLD
GOLD
BRONZE
Residue Flow
GOLD
GOLD
GOLD
Seed Depth Setting
BRONZE
GOLD
SILVER
Fertilizer Placement
GOLD
GOLD
GOLD
Optional Mid Row Banders provide optimal nitrogen
placement in a one-pass operation.
Field Finish
GOLD
GOLD
GOLD
The single opener design provides a smoother field finish
than competitive drills.
GOLD
Optimum results in a wide
operational range
SILVER
Optimum results in a typical
operational range
BRONZE
Optimum results in a limited
operational range
Further details on the
3320
XTC
found on:
p 20-23
12
3 3 2 0 S E A N D 3 3 2 0 Q D A S E E D O P E N E R A S S E M B LY
The 3320SE and 3320QDA are equipped with the innovative and proven PHD Seed Opener Assembly. The incorporation of parallel
link depth control with a 2-to-1 contour ratio ensures you will achieve a consistent seed depth over a wide range of conditions
with a variety of seed openers.
1
2
Simple Depth Control
Bourgault incorporates an indexed pin
depth adjustment that is simple and
repeatable. Each position provides 1/6" of
adjustment, for a total range of 2-½".
4
The 3320 PHD utilizes a 1-¼"
diameter cylinder, which is smaller
than the original, for quicker lifting in
the headlands and reduced hydraulic
demand.
5
Carbo-Nitrided Shafting
The hydraulic cylinder shaft is hardsurfaced for protection, rather than hardplated which is prone to causing seal
damage from nicks and wear.
6
Lube-Free Bushings
Spend more time in the field and less
time greasing. Bourgault incorporates
fiber and hardened steel bushings to
ensure long service life without the hassle
of greasing.
3
Improved Response
7
Bolt-On Wheel Assembly
ParalinkTM Control
A packer wheel assembly can be quickly
changed in the field. Get seeding again
in minutes!
The Paralink™ design maintains the
attack angle of the opener in the ground
as the opener follows the ground profile.
This feature maintains consistent soil flow
characteristics with a range of openers.
1
Built to Last
Strong, well-designed cast components
resist bending and breaking, even when
conditions are tough. You don’t have to
worry about bent seed arms tracking over
fertilizer rows.
9
Choice of Seed Knives
The Paralink™ design guarantees consistent seed knife angle relative to the
ground, regardless of its position. This allows you to select the seed knife or tip
that works best for your farming operation.
Guidelines are provided to help achieve intended results, but, final opener
selection, and subsequent field performance is the sole responsibility of
the opener manufacturer and the owner.
8
13
2
3
4
6
5
8
Efficient Seeding
Ideal opener-to-packer distance allows
soil to flow into the seed row. This,
combined with the 2-to-1 ratio enables
you to achieve a consistent seed depth
at greater seeding speeds for the given
conditions with a wider range of opener
widths.
7
9
Choice of Packer Wheel
To suit your seeding situation, Bourgault
offers a range of 4 packer wheel options:
a 4.8" pneumatic, a 4.5" v-style semipneumatic, a 4.5" round semi-pneumatic,
and a 5.4" round semi-pneumatic.
2:1
CONTOUR
R AT I O
3320SE shown
14
3 3 2 0 S E A N D 3 3 2 0 Q D A S E E D O P E N E R A S S E M B LY
The 2-to-1 contour ratio of the PHD Seed Opener Assembly
is designed to deliver good contouring characteristics and
consistent results in a wide range of seeding conditions. For
every inch that the packer wheel moves, the seed opener will
move ½" (refer to page 7). This feature dampens opener
movement, providing consistent seeding depth even when
3320SE shown below
seeding at an angle to last year’s furrows, or through aggressive field residue
such as corn stalks. The forgiveness of the 2-to-1 also provides greater opener
stability at higher seeding speeds and delivers better seed placement if there
is mud build-up on the packer tires as compared to competitive independent
seeding units. With the PHD Seed Opener Assembly, you can push the seeding
envelope and still achieve consistent seed placement results.
3 3 2 0 SE A N D 3 3 2 0 QDA PA R A L I N K H O E D R I L L S
15
E F F E C T I V E V E R T I C A L P E N E T R AT I O N FO R C E
E Q U I P M E N T - F R I E N D LY F I E L D F I N I S H
The PHD Seed Opener Assembly, in combination with the heavy construction of
the 3320 frame, delivers excellent soil penetration force when required.
As harder areas of a field, such as sprayer or combine tracks are encountered,
the PHD trailing arm design maintains very consistent opener penetration,
and packer wheel force. This greatly minimizes the need for on-the-go packer
adjustment for localized areas of compaction.
Don’t beat your equipment
(or your back) up! The Bourgault
3320 PHD provides the best field
finish in the independent depth
hoe drill market. A smoother
field finish means less bouncing in the sprayer, or the combine, and allows you to
get every bushel of short or lodged crops more easily.
16
3 3 2 0 Q D A ( Q U I C K D E P T H A D J U S T ) PA R A L I N K TM H O E D R I L L
Similar to the 3320SE, the 3320QDA is equipped with PHD Seed Openers mounted on a durable and well-engineered frame. Where
the 3320QDA sets itself apart is in the incorporation of a frame height adjustment system, which provides you with the ability to
adjust seeding depth with speed and convenience that you never expected with an independent depth seeding system. The 3320
Quick Depth Adjust configuration is unique in the market, as it is the only independent depth drill that allows you to change
your seeding depth easily and effectively.
FIVE YEAR
LIMITED WARRANTY
3 3 2 0 QDA PA R A L I N K H O E D R I L L
17
The 3320QDA frame is hydraulically adjusted.
Its adjusted position is maintained with a
shim assembly. Hydraulic/shim assemblies
are located on both the QDA's front caster
wheels and rear carrier wheels.
Independent Hoe Drill Openers can maintain
a seeding depth
independently of the frame,
but the operator must
adjust every opener when
changing seeding depth.
Air Hoe Drill The producer needs only
to adjust the frame height
to set seeding depth, but
each opener is fixed across
the frame.
The Bourgault 3320QDA
The 3320QDA offers the
best of both worlds.
You have the precise
seed placement of an
independent system, along
with an effective range of
quick depth adjustment
previously found only with
solid frame hoe drills.
T H E I M P O R TA N C E O F
SETTING THE CORRECT
SEEDING DEPTH
Every farmer knows that achieving
the right seeding depth for the given
crop and current conditions is critical
for optimal germination. The hassle
of setting an independent depth
seed drill encourages producers to
find a “close-enough” seeding depth
that is an average of the actual
required seeding depth. Bourgault
recognized this trend as a detriment
to the producer's bottom line, and
endeavored to offer a better solution.
The result is the 3320QDA, the only
independent hoe drill with convenient
and effective seed depth setting.
18
3 3 2 0 Q D A H Y D R A U L I C / S H I M A S S E M B LY - S E E D D E P T H A D J U S T M E N T M A D E E A S Y
1
2
Frame in field operating position.
3
Divert hydraulic pressure to
frame lift cylinders.
Raise frame to take pressure off to allow
placement of shims.
HOW IS QUICK DEPTH ADJUST POSSIBLE?
This feature is made possible by
the 2-to-1 contouring ratio of
the PHD Seed Opener Assembly.
A change in frame height will
produce a change of half as much
in seeding depth (refer to page 7).
To capitalize on this, the 3320QDA
is equipped with a hydraulic
cylinder and shim assembly on
each front caster wheel and rear carrier wheel. To set the seed depth at the frame, these cylinders are
extended to lift the frame, and shims are slid in or out of position. Once the shims are set, the cylinders are
retracted back into operational position. The 3320QDA provides ten shims, each shim equals 1/8" of seed
depth adjustment for 1-¼" of total quick depth change range. Seeding depth can still be set on the PHD
Seed Opener Assembly to achieve the optimal location for best use of the quick depth range, and
for adjustment of individual openers that operate
in wheel tracks.
3 3 2 0 QDA PA R A L I N K H O E D R I L L
19
4
5
Remove retaining pin from shims.
Place desired number of shims into position.
6
Replace retaining pin to secure shims at new
depth setting. Frame can then be returned to
operating position.
BEST OF BOTH WORLDS
Frame height adjustments will affect the operational depth of the MRBIIIs by a factor of two in
comparison to the seed openers, as they are fixed stationary to the frame of the 3320QDA. A ¼"
change of seeding depth for the opener will produce a ½" depth change for the MRBs. Change in
depth for the MRBs is typically not as critical as with seed openers, but should still be realized by
the operator.
The convenience and efficiency of
seed depth setting with the 3320QDA
provides farmers an option to help
them better achieve the critical job of
setting the required seed depth for the
given conditions. The 3320QDA truly
provides the best of both worlds, the
only independent hoe drill with quick
depth adjustment.
20
3 3 2 0 X T C ( e X t r a T E R R A I N C O N T O U R I N G ) PA R A L I N K TM H O E D R I L L
Producers dedicated to precision seed placement in challenging terrain now have a seeding system dedicated to this goal, the
3320XTC. The 3320XTC Seed Opener incorporates proven PHD features into a new design which includes a tighter opener-to-packer
distance and one-to-one contour ratio. Precision-minded farmers can set the 3320XTC to achieve consistent seeding depth over
hilltops and through water runs. No other independent seeding system is better suited for fields with varying topography.
FIVE YEAR
LIMITED WARRANTY
3 3 2 0 X TC PA R A L I N K H O E D R I L L
21
ONE-TO-ONE CONTOURING
If you invest your time and attention into every detail
to achieve even germination, the 3320XTC is the
seeding system for you, featuring the new Paralink
XTC Seed Opener Assembly. The XTC Seed Opener
works on a one-to-one contour ratio, an important
feature to ensure exact seed placement when
seeding over a hilltop or through a water run.
DURABLE CONSTRUCTION
The Bourgault commitment to ingenuity, durability
and simplicity shines through with the XTC Seed
Opener Assembly, featuring rugged cast components
and long-wearing pivot bushings. By incorporating
the new seeding opener on the proven 3320
frame, producers have the most advanced and
durable precision seeding system available. Expect
reliable service through many seasons with the new
Bourgault 3320XTC.
E F F E C T I V E O P E R AT I O N A L R A N G E
Even with this level of attention to precision, you are able to achieve unprecedented results in a wider
range of conditions than you would ever expect from the competitors’ independent seeding units. The
XTC Seed Opener Assembly utilizes the same Paralink principle to maintain the seed knife’s ground attack
angle, regardless of the opener position. When paired with optional MRBIII nitrogen applicators, you will
reap the benefits of safe fertilizer placement, excellent seed placement, and the consistent row spacing
from the anti-skewing benefits of the coulter-style mid row banders. The 3320XTC effectively seeds
terrain and conditions that strand competitor’s independent depth drills.
22
1
3 3 2 0 X T C S E E D O P E N E R A S S E M B LY
Easy-Adjust Depth Control
2
Adjusting the depth on an independent
depth system is time consuming, so
Bourgault incorporates a spring retained
depth setting system for a quick and
repeatable depth setting across the
whole unit.
4
Quick Hydraulic Response
The 3320 XTC utilizes a 1-¼" diameter
cylinder, which is smaller than the
original, for quicker lifting in the
headlands and reduced
hydraulic demand.
5
Carbo-Nitrided Shafting
This processed shafting is hard-surfaced
for corrosion protection, rather than
hard-plated which is prone to cause seal
damage from nicks and wear.
6
Precision Seeding
The unique features of the XTC Seed Opener
include an optimized opener-to-packer distance
and a one-to-one contour ratio. When equipped
with narrow seed knives, no other independent
seeding system is better suited for producers
who are dedicated to achieve precision seeding
results, even in challenging conditions such as
over hill tops and through water runs.
7
3
ParalinkTM Control
Bolt-On Wheel Assembly
The Paralink design maintains the attack
angle of the opener in the ground as the
opener follows the ground profile. This
feature maintains consistent soil flow
characteristics with selected openers.
A packer wheel assembly
can be quickly changed in
the field. Get seeding again
in minutes!
Lube-Free Bushings
8
Spend more time in the field and less
time greasing. Bourgault incorporates
fiber and hardened steel bushings to
ensure long service life without the hassle
of greasing.
Bolt-On Seed Knife
The XTC seed opener design guarantees consistent seed knife angle
relative to the ground, regardless of its position. Equip your XTC with
a narrow seed knife to achieve accurate placement even at shallow
seeding depths.
9
1
7
10
Guidelines are provided to help achieve intended results, but
final opener selection, and subsequent field performance is the
sole responsibility of the opener manufacturer and the owner.
6
4
3 3 2 0 X TC PA R A L I N K H O E D R I L L
23
3
2
5
8
Built to Last
Strong, well-designed cast components
resist bending and breaking, even when
conditions are tough. You don’t have to
worry about bent seed arms
not tracking.
9
Choice of Packer Wheel
To suit your seeding situation, Bourgault
offers a range of 4 packer wheel options:
a 4.8" pneumatic, a 4.5" v-style semipneumatic, a 4.5" round semi-pneumatic,
and a 5.4" round semi-pneumatic.
PRECISION IN DESIGN
The 1:1 contour ratio of the XTC Opener
Assembly is designed to deliver excellent
contouring characteristics as the full parallel
linkage allows the XTC opener to follow the
field independent of the frame (refer to page
7). The packer wheel and seed opener travel
in unison for precise results and if the frame
wheels sink, in soft soils, the depth will not
be affected. The contour ratio is not the only
aspect of a highly contour-able seed drill.
The distance between the seed opener and
packer wheel (#6) is
slightly shorter than what
is found on the 2-to-1
PHD seed opener. This
tighter placement will help
achieve consistent seed
CONTOUR
R AT I O
placement even with sharp
changes in topography.
1:1
10
Land Following
For every 1" of vertical movement of the packer
wheel, the seed opener also travels 1" thereby
maintaining seed depth accuracy as the XTC opener
seeds through rough terrain that varies by plus or
minus 8" over the depth of the drill.
To adjust the depth, simply
squeeze the handle on the
opener adjustment and
rotate the indicator to the
new position.
OPTIMIZED INDEPENDENT
SEED DEPTH ADJUSTMENT
Precision farming requires seed depth changes to
match crop type and field conditions. Bourgault has
optimized the seed depth adjustment on the oneto-one XTC seeding arm to maximize both efficiency
and accuracy. Simply squeeze the handle on the
opener adjustment and rotate the indicator to the
new position. The notched profile and guide will help
the operator with consistent and repeatable guide
settings. You can be confident that the extra time
invested in seed depth setting has been minimized
with this well engineered depth adjust system.
24
MID ROW BANDERS®
MID ROW BANDERS
25
Since Bourgault released the first series of Mid Row Banders® in 1997, thousands of farmers have realized the benefits of
applying nitrogen mid row in a one-pass operation. This success is underlined by the fact that when updating their seeding
system, the vast majority choose to continue with Mid Row Banders.
ONE-PASS SEEDING
MRBs are the only one-pass seeding method that
maintains seedbed integrity and provides ideal
fertilizer placement. Truly Mid Row Banders have
revolutionized one-pass seeding as the most value
adding product on the farm. The goal behind onepass seeding is to apply all of the seed and fertilizer
requirements in a single operation without the
seeding operation itself incurring risk to the potential
crop. Key factors to consider are:
Seedbed Integrity –
Never compromise seedbed quality for a onepass seeding operation. The quality of the
seedbed is paramount to ensuring the best start
for the crop.
Ideal Fertilizer Placement –
Nitrogen fertilizer, in its initial form, is very toxic
to living organisms. The nitrogen must go
through a process of nitrification in order to
be usable by the plants. A one-pass seeding
operation must not allow the seed to be
endangered by nitrogen fertilizer.
To learn more about the benefits of MRBs go to:
www.bourgault.com
Mid Row Bander, Mid Row Banders, and MRB are registered trademarks of Bourgault Industries Ltd. in Canada and U.S.A.
Available on:
the Series 3320 Paralink
Hoe Drills, the 5810 AHD,
the 3710 ICD and the
5925 ACD.
MRS II
Available on:
the Series 3320 PHDs
and the 5810 AHD
on 12" spacing
The Mid Row Shank II provides
one-pass fertilizer application
with an edge-on style shank.
The MRSII is an ideal option
if residue clearance is not
a primary concern for your
farming operation. It also
provides the critical mid row
placement of nitrogen with less
moving components than the
coulter-style banders.
26
The MRB®III fertilizer application system is the most advanced, and durable mid row banding system offered by Bourgault. The
extensive use of well-engineered cast components, convenient depth adjustment, and hydraulic engagement means more time for
you in the field seeding, and less time spent adjusting, or maintaining.
1
Floating Carbide Scraper
The floating inside scraper can be
adjusted to ensure a good furrow is
maintained and the coulter stays clean in
a wide range of seeding conditions. The
carbide edge will provide long service,
even in abrasive soils.
4
2
MRBIIIs are raised & lowered hydraulically.
This feature makes the MRBIII convenient
to lock up when not in use.
5
Parallel Link Arrangement
The MRB body is mounted on parallel
arms for a consistent disk attack angle
and seed boot/liquid tube orientation
regardless of its operating depth.
6
Maintenance-Free Coulter Arm Pivots
The MRB arm pivots on 1" diameter nitride
pins and 3" long greaseless composite fibre
bushings. The nitride pivot pins will stand up for
the life of the seeding system, even in hard or
stony soils.
3
Hydraulic Actuation
7
Double-Tapered Roller Bearing Hub
You can expect a long service life with the high
capacity hub and spindle assembly. A triple-lip
seal protects the hub bearing, and allows you
to over-grease without seal damage. The bolton hub and spindle can be quickly removed for
exchange or service.
Simple & Easy Depth Adjustment
B
Closer Tine or Retaining Wheel Option
Shims on the hydraulic cylinder are used
for setting the depth.
(one ¼" shim = ½" depth)
Option A - The outside closer tine is designed to help retain soil, and
hold some residue against the disk during operation to clean the
outside of the coulter so that it will cut a clean groove in the soil.
Extra shims are stored on the top
mounting pin for convenient access.
Option B - If additional soil retention is desired (e.g. NH3 application)
then consider the retaining wheel option. An adjustable torsion spring
maintains down pressure of the floating rubber cleaner / retainer wheel.
Fine Scraper Position Adjust (Behind Cast Mount)
The position of the scraper relative to the edge of the disk can be
adjusted in fine 1/8" increments using plastic shims located on the
scraper shaft.
This fine adjustment ensures you have optimal results for the
life of the disk.
8
Coarse Scraper Position Adjust
Loosen the mounting bolts to adjust the
whole scraper/boot assembly. This allows
you to maintain the optimal scraper-todisk and combo-boot positions.
M I D R O W B A N D E R S III
27
9
Combo-Boot
The versatile combo-boot allows you to
select between dry, liquid, or anhydrous
forms of fertilizer application. A single
1-¼" diameter tertiary line is used for dry
product delivery.
2
A
10
The large 20-½" diameter single bevel
boron steel coulter is set at a 4.5° angle
to open the soil just enough to deposit
the fertilizer. Boron steel disks provide
excellent wear and flexing characteristics.
11
12
4
5
7
8
6
9
Long Wearing Coulter
11
Strong & Durable Cast Components
The MRBIII will operate in the most
challenging agricultural environment
without breaking or bending. Well
designed castings are machined to exact
specifications.
3
1
10
12
Scraper Pressure Adjust
The pressure of the carbide scraper on
the disk can be easily set to match soil
conditions for optimal results.
S I Z E + V E R S AT I L I T Y = G R E AT E R P R O F I T
Available in sizes up to 60 feet, the Bourgault 3710 Independent Coulter Drill is the
most revolutionary coulter-style seeding system on the market today!
FIVE YEAR
LIMITED WARRANTY
3 7 1 0 I N D E P E N D E N T C O U LT E R D R I L L
PA R A L L E L WA L K I N G C O U LT E R A R M
29
CONTOUR-ABILIT Y AND CONSISTENCY
The intelligent, and durable patent-pending Parallel
Walking Coulter Arm Assembly blends the benefits
of a true one-to-one independent opener and a
unique walking cleaner-packer wheel assembly. The
parallel arm mount ensures the opener maintains the
1
same angle of attack to the soil, regardless of the seeding
depth. The rearward positioning of the front gauge/cleaner
wheel and the action of the walking axle reduces plugging in
muddy conditions. The 3710 will deliver consistent results
over a wide range of field and operating conditions.
Packer Depth Adjustment
2
3
Parallel Arms
20-½" Coulter
When going over residue or obstacles, the
walking action between the cleaner and packer
wheels stabilizes the coulter arm assembly
reducing coulter movement by a factor of two.
The result is superior precision seed placement
as compared to competitive units with the
cleaner wheel fixed to the side of the coulter.
Walking Axle
Cleaner Wheel
(2 cleaner wheel options available)
Packer Wheel
(4 packer options available)
(patent pending)
30
CONFIGURE FOR YOUR REQUIREMENTS
O N - T H E - F LY H Y D R A U L I C C O N T R O L
The 2-row, Bourgault 3710 Independent Coulter Drill
is offered at 7-½", 10", and 12" spacing on 40', 50',
and 60' working widths. If you require the flexibility
of a row-crop spacing, the 7-½" and 10" spaced
models can lock up one row to produce 15" and 20"
spacing respectively.
The 3710 Independent
Coulter Drill provides
a unique and valuable
feature that allows you
electric-over-hydraulic
control of penetration and
packing force through the
Model 410 Control Box.
Apply up to 450 lb of opener downforce and 70 to
230 lb of packer wheel downforce on each seed row!
A gauge on the control box allows you to monitor the
hydraulic pressure being applied.
CHOICE OF PACKER & CLEANER WHEELS
The Double-Shoulder Offset
Packer Wheel (A) is effective in
directing soil over the furrow, as
well as closing the flap created
by the disk. Shims located
on the packer wheel assembly
enable you to optimize the
packer position relative to the
opener. A 4.8" pneumatic (not
shown), a 4.5" semi-pneumatic
(B), and a double-shoulder packer
wheel (C) are also available.
*Please check with your nearest dealer to ensure local availability
of all options at time of ordering.
S E E D AT H I G H E R S P E E D S
Owners of the 3710 ICD note that they can typically
seed at higher speeds than with their previous hoe
drills, and yet can maintain desired seed placement
while achieving an excellent field finish. Producers
found they can greatly improve their productivity
without increasing the width of their seeding system.
WALKING AXLE LINK
The walking axle
link frees the
packer and gauge
wheel to act in
tandem while
setting the depth
LOW DISTURBANCE SEED BOOT/SCRAPER
The narrow profile Low Disturbance Scraper
provides seed placement in a narrow cut
seedbed. The result is an exceptional field finish
that preserves soil moisture in order to foster
germination.
Low Disturbance
Scraper
3 7 1 0 I N D E P E N D E N T C O U LT E R D R I L L
31
for the opener. You have the option to shorten the
link to lock the gauge wheel slightly off the ground
so that the packer wheel alone sets the opener
depth. This is advantageous in conditions where
additional packing force is required, or if there is
concern of the cleaner wheel pulverizing the soil.
THE SERIES 3710ICD SPECIFICATIONS
MODEL
3710-40
3710-50
3710-60
No. of Sections
3
5
5
Opener Row Spacing
7.5" or 10" or 12"
No. of Rows
2
2
2
Trip Assembly
19'5"
20'5"
19'11"
Independent depth control with in-cab
adjustable trip force
14'
17'3"
Packing Force
70-230 lb (walking configuration)
100-330 lb (locked configuration)
Transport Width
Transport Height (max) 15'3"
REDUCED HAIR-PINNING
The 3710 ICD arm mounts the 20-½" disk opener
on a 5 degree horizontal and 10 degree vertical
compound angle. This innovative feature will
provide better cutting action through field residue,
greatly reducing the issue of hair-pinning in the
seed rows.
Weight (lb)
7.5" w/ MRBIII
37,000
49,000
-
7.5" w/o MRBIII
30,000
41,000
46,500
10" w/ MRBIII
32,500
43,000
48,000
10" w/o MRBIII
27,000
36,000
40,500
12" w/ MRBIII
30,000
40,000
44,000
12" w/o MRBIII
25,000
33,500
37,500
Tires
Main Frame Rear 13.5Lx15FI (4) 13.5Lx15FI (4) 13.5Lx15FI (4)
Note:Anti-Hairpinning
It is recommended
to
Seedbed
Inner Wing Rear
use Mid Row Banders for the
Outer Wing Front
-
13.5Lx15FI (4) 13.5Lx15FI (4)
Outer Wing Rear
-
13.5Lx15FI (4) 13.5Lx15FI (4)
placement of nitrogen fertilizer
Seed
when using Seed
the 3710 ICD in a
one-pass seeding operation.
Fertilizer
Opener Depth Adjust.
Pin style
Packer Options
4.8" pneumatic, 4.5" semi-pneumatic double
shoulder, 4.5" semi-pneumatic double offset
shoulder, 4.5" semi-pneumatic smooth crown
Pneumatic Packer
Tire Pressure
12 to 50 psi
Air Kits
Single-shoot or double-shoot
Blockage Monitors
Optical blockage monitors available in
single run (1 per manifold) or full run
(1 per tertiary line)
Main Frame Front 13.5LX15FI (4) 16.5LX16.1FI (4)16.5LX16.1FI (4)
Inner Wing Front 13.5Lx15FI (4) 13.5Lx15FI (4) 13.5Lx15FI (4)
Low Disturbance Seedbed
13.5Lx15FI (4) 13.5Lx15FI (4) 13.5Lx15FI (4)
* all weights are estimates and are subject to change
Row to Row Spacing
66"
Safety Chain & Lights
Standard
Wing Transport Locks
Standard
Mid Row Banders
Optional MRBIII hydraulically actuated
Row Cropping
Configuration (optional)
15" w/ 7.5", 20" w/ 10"
Rear Drop Hitch
For pulling liquid or NH3 tanks with (optional)
lower hitch pull points
Front Caster Wheels
Double-walking casters standard on all
main frames
Double-walking casters on inner & outer wings
5810
58
10
AIR HOE DRILL
THE PROVEN PERFORMER
“Well built” - a phrase that truly
describes the 5810. The frame of the
5810 features 4" x 4" ranks sandwiched
between continuous members running
top and bottom, the full depth of the
frame to provide high strength for
trouble-free service. Hinges, linkages
and wear points utilize components
such as hardened pins, case-hardened
bushings, brass bushings, nylon wear
pads, composite bushings and chrome
pins. Even the rockshaft rides on
protective nylon bushings. This is
all part of the equation in providing
a machine that will be as reliable a
decade down the road as it is today.
If your farm demands a “well-built”
drill with maximum up time and low
maintenance, the 5810 is the right drill
for your farm.
FIVE YEAR
LIMITED WARRANTY
5810 AIR HOE DRILL
33
M R B III - T H E L A T E S T I N O N E - P A S S S E E D I N G S U P E R I O R I T Y
The hydraulically actuated MRBIII nitrogen applicators are located on the front row of the 5810. This
increases the distance between the banders and trips thereby reducing the opportunity for residue to catch.
The MRBIII hydraulic circuit is connected to the 5810 wing lift circuit & does not require a separate remote.
The MRBIII cylinder maintains coulter downforce, drawing very little hydraulic demand during field operation.
T H E H E A R T O F T H E 5 81 0 A H D - T H E B O U R G AU LT S P R I N G T R I P
The Bourgault spring trip is a true combination of
ingenuity, durability and simplicity. The Bourgault
spring trip cushion design utilizes increasing force
geometry, allowing the Bourgault air hoe drill to be
effective where competitor’s systems just ride on
top of the ground. Bourgault spring trip assemblies
will outlast competitors by a factor of two or more.
Should maintenance be required, the trip assembly
can be refitted easily, safely, and economically using
common tools.
The Bourgault 450 HD spring trip cushion
incorporates a 1" pivot protected with a greaseless
nylon bushing and a 1-¼" tapered shank that is 55%
stronger than a traditional 1" shank.
330 lb Trip
2¼" Diameter Spring,
7/16" Diameter Wire
1" Diameter Pivot
1" Shank
450 lb HD Trip
27/16" Diameter Spring,
15/32" Diameter Wire
1" Diameter Pivot
1¼" Thick
1" Thick
34
S U P E R I O R F LOATAT I O N
SINGLE-POINT DEPTH SETTING
PICK THE PACKER FOR
YOUR CONDITIONS
The 5810 AHD tires are customer approved!
Large caster wheels minimize the pounds per
square inch pressure resulting in low compaction,
very good transport handling ability, as well as
exceptional floatation in wet conditions. The
5810-72 foot comes standard equipped with
double walking 16.5L x 16.1 main frame tires and
double 13.5L x 15 tires on inner and outer wings.
When time is of the essence, being able to set
your seed depth quickly and accurately is a high
priority. The 5810 AHD allows you to achieve
optimal seed depth in minutes with the Quick
Shift Depth Control system. Set, check, and
adjust your seeding depth in minutes!
Consider all the packer wheels available to
customize the 5810 AHD for your farming
operation.
The weld is
protected by the
cap to eliminate
soil abrasion.
A
B
C
Steel wheel packers
(A) are 21-¼" diameter and
are available in 2-¼", 3-½"
and 4-½" widths. The 3
piece construction has been
optimized for the 5810 AHD
to increase durability. The
4-½" packer has a ¼" thick
steel cap, the 3-½" packer
has a 3/16" thick steel cap,
while the 2-¼" has a 7
gauge cap. Mud-scrapers
are optional for steel wheels.
Rubber-faced semipneumatic wheels are 22"
diameter and offered on 3"
and 4" widths (B).
A fully pneumatic 20-½" dia.
wheel with a 5-½" width is
available (C). Tire pressure
can be adjusted from 6 to
45 psi to match seeding
conditions.
Stone kickers are standard on all packer options.
5810 AIR HOE DRILL
35
QUICK AND EASY LEVELLING
Precise levelling is critical to achieving a consistent seedbed. The 5810’s
easy-to-access levelling adjustments let you accurately level your entire 5810
using one standardized procedure...which allows you to get into the field faster.
Adjustment wrenches are provided. Detailed instructions are located near the
point of adjustment.
5810 AIR HOE DRILL SPECIFICATIONS
MODEL
5810-42
5810-52
5810-62
5810-72
3
5
5
5 op. / 7 tr
No. of Sections
No. of Trip Rows
Row-to-Row Spacing
24-½"
Frame Depth
77-½" (42', 52', 62'), 102" (72')
159" (at 1" working depth)
w/o MRBIII/MRSII
4
4
4
5
Caster to Packer Depth
w/ MRBIII/MRSII
3
3
3
4
Wing Casters
Dual-rigid
Hydraulic System
Master/slave depth cylinders, single point depth adjustment
Working Widths
(11L x 15-C only),
dual-walking (13.5 x 15-C only)
9.8" Spacing
42'6"
52'3"
62'1"
71'10"
Trip Spacing
9.8", 12.6"
12.6" Spacing
42'
54'7"
63'0"
73'6"
Trip Assemblies
330 lb, 450 lb HD
22'3"
23'8"
24'0"
23'5"
Openers
Openers not supplied, BTT quick change adapter is optional
17'6"
16'1"
17'11"
18'11"
Packer Options
Steel 2-¼", 3-½", 4-½" / Rubber 3", 4", / Pneumatic 5-½"
Packer Wheel Mudscrapers
Optional for steel packers only
Transport Width
@ top
Transport Height
Weights in lb
(max)
(*estimates only)
9.8" w/ MRBIII
28,250
36,000
40,500
48,800
Stonekickers
Standard
9.8" w/o MRBIII*
25,000
32,000
35,700
43,300
Mid Row Banders
MRBIII hydraulic option
12.6" w/ MRBIII*
26,000
33,750
38,150
45,200
Mid Row Shank
MRSII hydraulic option (12.6" spacing on 42', 52', 62' only)
12.6" w/o MRBIII* 23,500
30,500
34,400
40,600
Obstacle Clearance
In field: Trips ~10", MRBIII/MRSII ~8"
In transport: Trips ~12", MRBIII/MRSII ~22-½"
Tires
Main Frame Casters
(double-walking)
13.5L x 15FI-E
13.5L x 15FI-F
13.5L x 15FI-F
16.5L x 16.1FI-E
**Inner Wing Casters
(double-walking)
13.5L x 15FI-C
13.5L x 15FI-C
13.5L x 15FI-C
13.5L x 15FI-C
Inner Wing Casters
(double)
(9.8" and 12.6")
11L x 15FI-C
**Outer Wing Casters (double-walking) Outer Wing Casters (double) Rear Transport Wheels 13.5L x 15FI-E
11L x 15FI-C
11L x 15FI-C
-
13.5L x 15FI-C
13.5L x 15FI-C
13.5L x 15FI-C
11L x 15FI-C
11L x 15FI-C
-
13.5L x 15FI-F
13.5L x 15FI-F
13.5L x 15FI-F
(mid rows raised)
Air Kits
Single-shoot, double-shoot
Seed Boots
Square (narrow) or Spreader (wide) options
Blockage Monitors
Single-run, or, full run options
Auto Clutch Switch
Optional
Safety Chain & Lights
Standard
Wing Transport Locks
Standard
Rear Tow Hitch Add-Ons
Optional drop hitch and competitor tank adapter
** optional configuration
79500
795
AIR SEEDER
Bourgault is proud to release
the new 7950 Air Seeder. The
capacity of the 7950 is most
impressive, with four main tanks
totalling 950 bushels in capacity,
plus an optional 30 bushel Saddle
Tank to make 980 bushels! Huge
850/80 R38 radial lug tires with
a 90" diameter minimizes rolling
resistance and keeps inflation
pressure to a low 15 psi. The
7950 is also equipped with brakes
to control the tank for safe
transportation. In addition to
capacity, the 7950 has many new
design features that take it to the
next level in air seeder design.
7950 AIR SEEDER
37
OPTIMIZE THE MASSIVE CAPACIT Y OF THE 7950
The patented integral tank design allows all four
main tanks to meter individually, or several tanks can
be combined to meter as one. The 7950 takes this
design one step further. Tank 1 has a tank within
a tank which does not have a meter (1B), but the
contents can flow into tank 1A (1A + 1B), or be
diverted to tank 2 (2 + 1B) in a matter of minutes.
This added feature provides even more flexibility
to utilize the impressive volume of the 7950 for
different cropping options.
7 9 5 0 TA N K C O N F I G U R AT I O N O P T I O N S
EXAMPLE 2
EXAMPLE 1
The 7950 provides unprecedented flexibility with 4 main tanks, the ability to subdivide the largest tank,
and an optional 5th tank. Below are two common examples:
Wheat
Urea
Phosphate
Canola
Urea
Phosphate
Sulfur
Tank 4
275 bu
1½ bu/ac
183 ac
Optional Bag Lift -
Tank 1 (1A+1B)
500 bu
140 lb/ac
213 ac
Tank 2 & 3
175 bu
50 lb/ac
257 ac
Tank 5 (opt.)
30 bu
5 lb/ac
299 ac
Tank 1 (1A+1B)
500 bu
140 lb/ac
213 ac
Tank 2 & 3
175 bu
50 lb/ac
257 ac
Tank 4
275 bu
80 lb/ac
243 ac
If the Saddle
Tank option is not
purchased, an
optional product lift
system is available for
lifting bags safely and
easily to the tank top.
38
MEGA RUBBER
HYDRAULIC METER DRIVE
Reducing compaction is important to ensure that germination and plant growth is not impeded. When fully
loaded, the 7950 can weigh up to 99,000 lb so compaction is kept down by the use of large 850/80 R38
tires. The tire provides a large footprint, especially when operating at an amazingly low 15 psi inflation
pressure, front and rear. The combination of very large 90" diameter tires, and low ground pressure gives
the 7950 very good floatation and minimizes draft loads, key factors when operating a tank this size.
The 7950 Air Seeder incorporates a new
hydraulic metering system capable of driving
up to 5 metering augers. The hydraulic drive
motors provide near instant rate changes, an
important feature to maximize the benefits of a
variable rate seeding operation.
KEEP YOUR EYE ON YOUR WORK
Monitor tank levels on
a convenient in-cab
display, allowing you to
seed right down to the
last pound! Cameras
come standard on the
7950, and include a rear
view camera so you can
watch for traffic behind you while in transport.
7950 AIR SEEDER
39
S A F E & C O N V E N I E N T S TA I R WAY
L O A D Q U I C K LY A N D E F F E C T I V E LY. . .
T H E 3 0 B U S A D D L E TA N K
and know when to say when.
(perfect for seeding canola) The optional Saddle
Tank (tank 5) mounted on the left side of the 7950
is designed to make seeding bagged product,
such as canola or granular innoculant, as easy as
possible. The low tank height allows bagged product
to be transferred directly from a pick-up truck to
minimizing handling.
The 7950 is available with either a 10" diameter
Conveyer with a 15" belt or a 12" diameter Deluxe
Auger. Both the conveyor and auger are controlled
by a remote contol. As a precautionary measure,
a manual backup is located on the tank. In
addition to controlling the conveyor/auger, the
remote also turns the fans off and on, activates
the optional product lift and displays weight from
the load cell option.
7950 AIR SEEDER
SPECIFICATIONS
MODEL
7950
Total Tank Volume
Volume (bushels)
950 bu (980 with optional 5th tank)
#1A Tank Volume
7950 with 12" Deluxe Auger
410
#1B Tank Volume
90 (non-metering)
#2 Tank Volume
120
#3 Tank Volume
55
#4 Tank Volume
275
#5 Tank Volume
30
(optional)
Despite its size, you will feel safe working on the
7950. Staircase access, from either side of the
tank have secure hand rails and comfortable 24"
wide grated cast steps that minimize slipping even
in muddy conditions. The wide tank top catwalk
incorporates safety rails and slip-resistant grating
beside and between each of the tank fill lids. The
stairs are also made to break-away in case of
ground contact.
Overall Length
42'10"
Transport Height
13'2"
Field Height
15'11"
(top of raised handrail with tanks full)
7950 with Conveyer
Overall Width
21'1"
(with standard duals on rear)
Weight
Load Cell Option - The 7950 load cell option
provides the convenience of knowing how much
product is placed in the air seeder, keeping track of
product applied, and determining the correct amount
of product required to finish a given field.
33,500 lb
(standard duals on rear)
Load/Unload Augers
12" Auger, or 15" conveyer
Tires
850/80R38 duals on the rear and
850/80R38 singles up front.
(All tires at 15 psi)
Drive
Electric Over Hydraulic
Monitor/Controller
X20 System Standard
6000
SERIES AIR SEEDER
T H E FA R M E R ' S C H O I C E
The Bourgault Air Seeder is
undoubtedly the best air seeder
available today. When you
speak to current 6000 Series
owners, they will tell you about
compartment flexibility, simple
and accurate metering, and other
features that are both convenient
and time saving. Once you see
what the 6000 Series can offer,
you will agree it is the right air
seeder for you.
6000 SERIES AIR SEEDER
41
I N D U S T RY- E XC LU S I V E I N T E R N A L TA N K D E S I G N
1
2
3
4
(Model 6700ST shown)
The patented interconnecting tank compartments
provide unprecedented flexibility to farmers. Just
open or close the ports between the three or
four tank compartments for quick and simple
configuration changes. Regardless of the product
combination, you can make the most efficient use of
the tank volume to minimize your number of fills.
When the tank is set for the rates you require, you
need the flexibility to direct it to the right air kit. The
Bourgault Class A Straight-Thru Primary System offers
the flexibility to meter product from any tank into any
primary line.
The Bourgault Air Seeder’s flexibility is unmatched in
the market, and will save time and headaches each
time you change products at seeding time.
POSITIVE DISPLACEMENT METERING SYSTEM
as treated seed and certain fertilizers. The PDM Plus
is gentle, proven by PAMI Research Update #702
that found that average seed damage to pulse crops
was 0%.
The PDM Plus Metering System is the heart of
Bourgault Air Seeders. High-density poly metering
augers are matched with precisely machined steel
orifices for accurate, consistent metering with low
maintenance, even with problematic products such
The PDM Plus auger draws product from a sump to
ensure precise metering, even at low tank levels.
The competitors’ use of wide metering rolls may
result in uneven product draw as product shifts or
piles. The sump also allows for easy and complete
tank clean out and metering auger inspection.
42
C A B R AT E A DJ U S T — C R A
VARIABLE SPEED TRANSMISSION
L E A D I N G T H E WAY
Application rate can be adjusted for each metering
auger at the push of a button from the tractor cab.
An electric actuator mounted on each transmission
remotely adjusts the rate setting when activated
by the operator. A second control panel is located
on the tank for convenient rate setting during
calibration.
The heavy-duty design of the Variable Speed
Transmission ensures that precise metering rates
will be maintained.
The Leading 6000 Series Air Seeder offers all the
versatility, reliability and durability of the 6000
Series tow behind models. The superior design and
balance results in approximately 8600 lb of hitch
weight for a fully loaded L6450 or L6550ST
air seeder.
GENTLE PRODUCT DELIVERY

The Bourgault product delivery
system is designed for
accurate distribution and low
incidence of seed damage.
Quick inspection manifolds with
convex polyurethane internal
surfaces direct the material to the next set of
distribution lines. Bourgault runs a battery of tests
to determine the consistency, or the coefficient
of variation for each air seeder kit. Independent
testing has proven that the Bourgault air seeder kit
design meets or exceeds industry standards.



Ground drive metering system.
Infinite adjust allows you to lock in the exact
rate.
Each transmission is protected by a selfresetting torque limiting clutch.
In case of electrical problems, transmissions
can be easily converted to manual adjustment
to ensure no downtime.
TA N K C L E A N O U T I S A B R E E Z E
Customers who have moved away from
competitor’s air seeders comment on how tank
cleanout is so much easier, quicker, and less
messy with a Bourgault.
With the Bourgault system, the producer just has
to remove two bolts holding the sump plate, and
product can drop neatly into the auger hopper.
PROXIMIT Y SENSOR
AUTO CLUTCH SWITCH
Equip your
seeding unit with
an optional auto
clutch switch for
automatic control
of the air seeder
when turning in the headlands. The switch is solidstate, eliminating any possible issues due to dust
contamination or wear. The proximity clutch switch
is available for both the 591 Monitor and the X20
Monitor / Controller system.
(Note: Auto clutch switch is standard on the 3320 PHD™
and 3710 ICD)
43
D UA L FA N & H I G H O U T P U T FA N O P T I O N S
P R O D U C T L I F T S Y S T E M (6350 – 6700ST)
Today’s larger seeding systems require a large
volume of air for accurate and consistent product
rates. Bourgault utilizes a two fan product
delivery system for double-shoot air kits to
maximize efficiency, simplify settings, and to
minimize any plugging problems.
Don’t strain yourself by lugging seed bags or
calibration boxes up the tank stairs! Simply lift
and then hydraulically to the top of the air seeder
platform (250 lb capacity).
Bourgault also has the Higher Output Fan option
if you are planning to apply very high rates with
larger drills.
The Model 591
Monitor reports
standard air
seeder functions
including fan
speed, theoretical
application rate,
bin levels, area
seeded, & ground speed. You can easily customize
the screens to stay on top of activities for up to four
products at once. The monitor will display changes
in rate when you make on-the-go application rate
changes with the Cab Rate Adjust feature.
H Y D R AU L I C C A L I B R AT I O N SY S T E M *
Obtain a product
sample quickly
and easily. The
speed and ease of
calibration allows
you to obtain a
larger sample for
more accurate rate
calculations. (*patented)
INDUSTRY-LEADING MONITORING
& CONTROLLING SYSTEM
(Upgrade to a X20 for up to 5 product variable rate control,
sectional control for NH3 or liquid, and as applied mapping.)
44
LOAD / UNLOAD AUGERS
6000 SERIES AIR SEEDER SPECIFICATIONS
Bourgault offers a variety of load/unload auger
systems to suit the size of each air seeder tank. The
ease of use and speed offered will get you loaded
and back in the field quickly. All auger systems
provide control from the ground and the tank top.
MODEL
A The Hydraulic Load/Unload Conveyor
incorporates a 15" wide belt for faster loading
when you move up to the 6700ST. Positioning
the conveyor is a breeze with hydraulic control
through a wireless hand-held remote. As
a backup, tank-mounted controls are also
included. The low-profile hopper provides you
with the convenience to use your semi-trailer
to fill directly into the air seeder. The hydraulic
Load/Unload Conveyer reduces fill times with
100% cleanout.
B The 10" Deluxe Load/Unload Auger allows quick
fills on the Model 6550ST and Model 6450
air seeders. Owners appreciate the ease of
positioning that is provided by the complete
hydraulic control. If you are on uneven terrain
or in windy conditions, the auger remains in
position. The low profile hopper provides you
with the convenience to use your semi-trailer to
fill directly into the air seeder.
C The 10" Standard Load/Unload Auger provides
a rapid fill time at a modest price for the Model
6450 air seeder. The 10" standard auger is
equipped with a hydraulic control for the swing
arm and the classic hopper design.
Total Tank Volume
6280
6350
6450 6550ST 6700ST
280
350
450
550
700
#1 Tank Volume
112 (Leading – 112)
140
145
170
370
#2 Tank Volume
168 (Leading – 56)
70
15
15
95
#3 Tank Volume
- (Leading – 112)
140
60
75
30
#4 Tank Volume
-
-
230
290
205
12'2"
Height/Width
A. Transport
12'1"
12'5"
12'5"
12'5"
B. Field (top of hand rail)
14'0"
15'0"
15'0"
15'0"
C. Overall Width
13'2"
13'6"
13'9"
13'9"
**
12'6"
15'6"
15'6"
22'10"
40'11"
(top of L/U auger)
(single tires)
15'0"
17'9"
Length
G. Front to Rear Axle
(Tow Only)12'6"
Hitch Pin to Rear Tow Hitch Pin
J. Tow Behind Units
29'10"
29'10"
32'7"
32'7"
J. Leading Units
27'3"
27'3"
30'2"
30'2"
10,200
11,000
14,000
15,500
6,500
7,500
8,600
8,600
-
5'0"
5'0"
5'0"
5'0"
10'4"
Optional Row
Crop Spacing
3.0 m
3.0 m
-
-
-
F. Rear, Single
10'10"
10'10"
10'10"
10'10"
-
-
10'0"
10'0"
10'0"
10'0"
Weight
(lb)
Max. Hitch Load
22,500
**
(Leading Only - lb)
Tire Spacings
D. Front Tire Spacings
(Tow Only)
F. Rear, Inside Dual
E. Rear, Outside Dual
Load/Unload Augers
Loading Rates
-
15'0"
15'0"
15'0"
15'0"
8" Std.
8" Std.
10" Std./Dlx.
10" Dlx.
10" Conv.
30 bu/min*
30 bu/min* 70/85 bu/min* 85 bu/min* 110 bu/min*
* load rates based on dry barley @ 48 lb/bu
** only available with dual tires
A
B
C
X20
MONITOR/CONTROLLER
Bourgault Industries is
partnered with Topcon Precision
Agriculture to provide the
X20TM Variable Rate Controller,
a highly flexible and accurate
monitor-controller integrated
with the best one-pass seeding
system available on the market.
46
F U L LY I N T E G R AT E D P R E C I S I O N S Y S T E M





The X20 Monitor/Controller by Topcon is an
optional system which performs monitor and
controller functions simultaneously. The large,
colour touch display provides a colourful, easy to
understand graphic interface. The X20 allows you
to control up to 6 products including anhydrous or
liquid fertilizer.
The monitor/controller cab-mount display has no
moving parts to ensure long operational life in
an agricultural environment. Rate control, alarm
monitoring, graphic feedback, and other tasks are
all performed instantaneously. You can adjust
the voice and visual alarms to suit your working
environment.
All sensors, clutches, and actuators are
connected to a central control box (ECU) on the
air seeder, with a single harness from it to the
monitor in the tractor cab.
Single-run blockage monitoring for both single
and double-shoot air seeder kits.
The easy to use variable rate Maplink software
allows you to import and build prescription maps
to place seed and fertilizer exactly where you
want it.
X20 MONITOR/CONTROLLER
47
S E E D & F E R T I L I Z E R R AT E C O N T R O L L E R


Standard Feature


Variable rate control of up to 6 products, including
NH3 or liquid fertilizer.
Bin levels, based on weight, count down as product
is applied.
Optional granular blockage monitoring available.
Sectional control for NH3 or liquid (works with
guidance system) - up to 6 sections
UNPRECEDENTED MONITORING AND CONTROL OF
YO U R S E E D I N G O P E R AT I O N
Achieve maximum precision seeding results with the advanced
technology of the Bourgault X20 variable rate system by Topcon.
Create the ultimate precision seeding system by configuring a
Bourgault Air Seeder, and its patented integral compartment tank, with
a Bourgault drill equipped with Mid Row Banders and the Bourgault
X20 variable rate system.
GUIDANCE SYSTEM



Standard Feature
Parallel and contour guidance standard.

Includes obstacle marking and automatic air seeder
clutch ON/OFF, plus, sectional control ON/OFF.
Save coverage maps.
MAPPING SYSTEM


Standard Feature
�
Upload maps from a PC or create on the X20
monitor.
Use GPS and VR control to apply your own
prescribed rates.

Log product application rates in a field map format.

Save as applied maps.
CAMERA KITS
An optional camera kit is available to provide a visual
reference inside the 6000 series air seeder tank, for
up to four locations. The 7950 Air Seeder comes
standard equipped with a camera kit. Cameras allow
you to seed confidently until the tank is empty.
 Bourgault MRBs place nitrogen
The X20 VRC package provides
touch screen control on a
in the ideal location to
large colour display
protecting the seed from
for input control
fertilizer damage,
on an acre-byespecially when
acre basis
the prescription
for up to six
rate for nitrogen
products,
becomes
X20
6000
SERIES A/S &
MONITOR
including
extremely high.
CONTROLLER
7950A/S
NH3 or
X20 producers
liquid.
are reporting
MRBs
incredible
The 6000
results with their
Series Air
seeding systems,
Seeder provides
with input reductions and
accurate dry product
crop yields that have made the
metering for up to four
investment one of the best in their
compartments, while the 7950
careers.
Air Seeder allows up to 5.
�
�

®
8910
C U LT I VAT O R
The 8910 Floating Hitch
Cultivator continues to be a
viable seeding tool in North
America. No other seeding
system can be set up for
tillage, then reconfigured into
an effective direct seeding
system. The clean and simple
floating hitch design, durable
construction, and superior
residue flow characteristics
have made this tool bar a
mainstay throughout the small
grain regions of North America
especially in areas that are prone
to wet seeding conditions.
FIVE YEAR
LIMITED WARRANTY
8 9 1 0 C U LT I V A T O R
49
FRAMES DESIGNED FOR
O U T S TA N D I N G E N D U R A N C E
The 8910 frame features five ranks of
4 x 4 x .250 wall tubing. These are connected
with continuous members above and below the
ranks, creating a deep profile for high strength
and many years of trouble-free operation. Forces
are transferred effectively throughout the frame to
ensure uniform soil penetration and consistent seed
placement, even in tough soils.
CONFIGURE FOR DIRECT SEEDING
Configure your Bourgault 10" spaced 8910 into the
8910 Culti-Drill. Equip your 8910 with your choice
of mounted packer wheel options, low-disturbance
seed openers, and optional Series 25 Mid Row
Banders for an effective one-pass seeding system.
You have the ability to adjust the packing pressure
of the on-row mounted packer wheels with the Titan
arms to suit the seeding conditions. The poly-gang,
or independent style packers, provide up to 50 lb/
wheel on average, whereas the heavy-duty packers
can be adjusted from 40 lb to 90 lb per wheel.
EASY TO LEVEL
EXCELLENT RESIDUE CLEARANCE
You are provided easy access to leveling locations.
Wrenches are provided for side-to-side adjustment
at the top of the depth control cylinders, and frontto-back adjustment at the screw jack between the
in-frame running gear and caster wheel.
The 8910 has five rows of shanks, mounted on an
8", 10" or 12" spacing, with a minimum of 32" or
40" respectively between shanks on the same row.
Special attention is given to clearance around the in
frame wheels of the implement.
SUPERIOR RUNNING GEAR DESIGN
R E S I L I E N T T R I P A S S E M B LY P I V O T
The 8910 Cultivator incorporates walking in-frame
running gear that is slightly biased to the back
wheel. The front wheel will not have a tendency to
“dip down” in wetter conditions, minimizing your
chances of getting stuck.
Research has proven that the ability to follow field
contours is primarily related to frame depth and
wheel positioning. The in-frame running gear also
minimizes the distance to the front caster wheels,
so you can achieve consistent seed depth in hilly
conditions.
The outstanding design
of the Bourgault Spring
Trip Assembly features
a grade eight pivot
bolt and an extremely
durable nylon bushing.
The simple and durable
design provides years of
service with low maintenance, yet can be replaced
easily, safely, and very economically using common
hand tools.
8 9 1 0 C U LT I V A T O R
50
8910 TILL AGE OPTIONS
Check out page 53
for further details on
Bourgault’s tillage options.
Titan™ Quick-Detach Arm
Heavy-Duty Mounted Packers
Gang-Style Poly Mounted Packers
Independent Poly Mounted Packers
Heavy-Duty Mounted Packers
8 9 1 0 C U LT I V AT O R S P E C I F I C AT I O N S
MODEL
8810-24
8810-28
8810-35
8910-48
8910-54
8910-70
No. of Sections
3
3
3
5
5
5
Wheel System
Offset walking tandem axles
No. of Rows
5
5
5
5
5
5
Wheel Standards
Triple-lip seals on 5,000 lb hubs
(6000 lb hubs on 48'-70' mainframes walking axles)
8" spacing
24'0"
28'0"
36'0"
48'0"
58'8"
-
Packer Options
28'0"
32'0"
40'0"
52'0"
-
-
Heavy-duty gang style, poly-gang style, or poly-independent mounted
(Poly-gang style packers - only packers available for the 8910 70')
10" spacing
25'0"
30'0"
35'0"
50'0"
55'0"
70'0"
Mid Row Bander Option
Series 20 MRBs on 8" spacing
Series 25 MRBs on 10" spacing (MRBs are not available on 8910-70')
30'0"
33'4"
40'0"
-
60'0"
-
Mudscrapers
Optional fixed or spring-loaded style
-
-
-
48'0"
56'0"
70'0"
Openers
Speed-Loc™ adapters are optional.
-
-
-
52'0"
60'0"
-
Air Kits
Leading or Tow-Behind; single-shoot or double-shoot kits
Blockage Monitors
Optical Blockage Monitors avail. for secondary or tertiary lines
Optional 4, or 3 bar heavy-duty harrows
Working Widths
12" spacing
Frame Widths
Main Frame
12'10"
12'10"
14'2"
15'6"
15'6"
15'6"
Mounted Harrow
Inner Wing
6'1"
7'9"
10'6"
8'8"
11'3"
15'6"
Shanks/Trip Assemblies
Outer Wing
-
-
-
7'10"
8'4"
10'1"
Transport Width
Transport Height
Weights
(max)
17'8"
17'8"
19'0"
25'1"
26'0"
25'9"
12'6"
13'11"
16'3"
14'4"
17'7"
20'4"
12,150 lb
19,300 lb
21,000 lb
-
330 lb initial trip
1" x 2" wide shank, 27" to 31" of frame to ground clearance (depending
on opener), 11" of obstacle clearance
450 lb HD initial trip
1" (@ opener) to 1-¼" (@ trip body) x 2" wide tapered shank,
27" to 31" of frame to ground clearance (depending on opener),
11" of obstacle clearance
(Base unit configured with 330 lb double spring trips.)
8" spacing
10,600 lb
11,400 lb
10" spacing
10,200 lb
10,800 lb
11,400 lb
18,300 lb
19,900 lb
22,200 lb
12" spacing
-
-
-
17,600 lb
19,000 lb
21,200 lb
Tires
Main Frame
9.5Lx15FI(4)
11Lx15FI(4)
11Lx15FI(4)
Inner Wing
9.5Lx15FI(4)
9.5Lx15FI(4)
11Lx15FI(4)
11Lx15FI(4)
11Lx15FI(4)
11Lx15FI(4)
Outer Wing
-
-
-
11Lx15FI(4)
11Lx15FI(4)
11Lx15FI(4)
MF Casters
9.5Lx15FI(2)
9.5Lx15FI(2)
11Lx15FI(2)
11Lx15FI(2)
11Lx15FI(2)
12.5Lx15FI(2)
IW Casters
9.5Lx15FI(2)
9.5Lx15FI(2)
11Lx15FI(2)
11Lx15FI(2)
11Lx15FI(2)
OW Casters
-
-
-
11Lx15FI(2)
11Lx15FI(2)
12.5Lx15FI(4) 12.5Lx15FI(4) 12.5Lx15FI(4)
(All Sizes)
Row-Row Spacing
25" min.
Row-Shank Spacing
8" spacing - 32" min.
Frame Depth
104-½"
Contour Depth
7'2" between the caster wheels and the walking axle pivot
Wing Lift
Solid truss system with hydraulics connected in parallel
Front/Back Leveling
Patented floating hitch axle/caster wheel linkage system
11Lx15FI(2)
Safety Chain, Trans.
Locks & Lights
Standard
11Lx15FI(2)
Side Draft Eliminators
Optional
Hitches
A-Frame, optional heavy-duty trailing hitch
Frame Members
4" x 4" x .250" Wall
9400
F LOAT I N G H I T C H C H I S E L P LOW
DESIGNED, TESTED, AND PROVEN
I TBI LO EN SD E S I G N
A N I N T E LFLOI GR E ANLT L &C O
DN
UD
RA
U N I Q U E T H R E E - P O I N T H I T C H AT TA C H M E N T
EXCELLENT CONTOUR DEPTH
The unique threepoint frame-tohitch attachment
properly
distributes the
pulling force that
can be generated by your high horsepower tractor. The
extra long hitch (20' on five-plex models) will provide
you with superior tracking characteristics in tough
tillage conditions.
Contouring is
primarily related
to frame depth
and wheel
positioning. The
9400 is designed
with front caster wheels positioned close to the front
of the frame, and the walking axles centered in the
frame. This results in even penetration depth through
the peaks and valleys requiring less horsepower when
compared to competitor’s models.
9400 FLOATING HITCH
CHISEL PLOW SPECIFICATIONS
MODEL
9400-28
9400-36
HANDLE MAXIMUM RESIDUE
9400-46
9400-54
No. of Sections
3
3
5
5
Working Widths
28', 32'
36', 40', 42'
46', 50'
54', 60'
Transport Width
19'3"
20'11"
24'6"
26'6"
Transport Height
12'6", 14'2"
14'9", 16'6", 17'3"
16'5"(all)
16'9"(all)
8'11"
8'11"
8'11"
8'11"
Frame Depth
Weights
(base unit)
500 lb trips
11,750 lb
13,070 lb
17,530 lb
18,990 lb
600 lb trips
12,710 lb
14,300 lb
19,100 lb
20,840 lb
Bourgault’s designers have always made
trash clearance a top priority. The 4 row trip
layout is designed to achieve unmatched trash
clearance around the wheels. The distance
between shanks is a minimum of 36", the
distance between adjacent bars is 32", and
the frame to ground clearance is 31-½" with
1-¼" shanks. This is all part of the formula for
superior straw clearance.
The Series 3320
Paralink™ hoe
drills CP
incorporate
The Bourgault
9400
is designed
seed openers with the durable Paralink™ arms that
to be the cleanest, most effective
pivot on lube-free composite fibre bushings. These
plow
on the
bushings arefloating
designedhitch
for longchisel
life in the
demanding
agricultural market.
environment.
Bourgault
incorporates
The
wide shank
spacing on a
strong cast components and weldments in the
4-row frame provides ample residue
seeding arm for extended trouble-free operation,
clearance
and flow.
Theand
rigid
frame
even when seeding
by uneven
bush lines
around
power poles.design allows you to achieve even and
The Series 3320 PHDs provide hydraulic force from
effective ground penetration in the
the mainframe to the inner wings, and ballast in the
soils.
The
to maintain
outer wings hardest
to distribute
loading
andability
ensure uniform
penetration athrough
the entire
width of the
drill. is
consistent
operating
depth
The superior design and durable construction of
reflected by the many producers who
the frame will ensure reliable service through many
seasons. have configured
their
9400 CP for
Bourgault and
our outstanding
network of world-class
seeding. dealers
have the best reputation for
FIVE YEAR
LIMITED WARRANTY
Tires - 9.5Lx15FI and 11Lx15FI (based on unit size and wheel location.)
9800
RIGID HITCH CHISEL PLOW
U N M AT C H E D F R A M E S T R E N GT H
Bourgault is confident in its
FIVE YEAR
LIMITED WARRANTY
claim that the 9800 Rigid
Hitch Chisel Plow is the
strongest chisel plow ever built.
A HITCH FIT FOR THE JOB
Continuous front-to-back beams
The 9800 hitch consists of a center beam designed to
transfer all of the fertilizer / air seeder cart load directly to
the tractor. Two 8" hitch side beams are fixed to the outside
points of the mainframe to effectively pull the 9800. You can
set the proper tongue height regardless of draw bar height or
operating depth with the hitch height adjustment mount.
running over-and-under the
frame provides even transfer of
forces in high-draft conditions.
The extremely strong frame
construction will ensure many
years of dependable service.
MAXIMUM RESIDUE, MINIMUM EFFORT
The four-row design provides generous distance between
the sweeps and the wheels, and the shank arrangement has
been optimized to provide excellent residue flow. No other
chisel plow can even come close to matching the 9800’s
performance in heavy residue. The 9800 RHCP has two
general operational positions: an 18" regular lift range setting
and a 22" high lift range setting. Optional stabilizer wheels
are available to ensure even penetration when you
are working in high draft situations.
9800 RIGID HITCH
CHISEL PLOW SPECIFICATIONS
MODEL
9800-28
9800-36
3
3
8" Spacing
28'0", 32'0"
36'0", 40'0"
10" Spacing
30'0", 33'3"
35'6", 41'0"
12" Spacing
28'0", 32'0"
36'0", 42'0"
15" Spacing
32'6"
40'6"
Transport Width
18'10"
18'10"
Regular Lift Range
13'6"@33'3"
18'3"@42'
High Lift Range
14'5"@33'3"
19'2"@42'
No. of Sections
Working Widths
Transport Height
Weights
(12" spaced base unit with 500 lb double spring trips.)
12" Spacing
Tires
10,480 lb
11,080 lb
11Lx15 FI, 12.5x15FI, and 9.5x15FI
(based on unit size and wheel location.)
MOUNTED TINE HARROWS
Mounted tine harrows will break lumps and even the soil for general tillage, or
lightly seal the seedbed in a seeding operation. Five different tine settings allow
you to set the angle to match your operation and conditions.


TILLAGE
OPTIONS
Four Bar Harrows feature 7/16" x 16" long double tines and 2" overall spacing.
IT’S ALL ABOUT CHOICE!
Three Bar Heavy-Duty Harrows provide ½" x 20" long tines on a 2- /8" overall
spacing.
For Bourgault 8810/8910 Cultivators,
5
Note: Three bar heavy-duty harrows, four bar harrows, & mounted packers can be interchanged.
9400 Floating Hitch Chisel Plows, and
9800 Rigid Hitch Chisel Plows
G A N G - S T Y L E P O LY M O U N T E D PA C K E R S
Gang style poly-packers are ideal for 8810/8910 or 9400 seeding systems where
moderate packing is required for breaking soil lumps and sealing the seedbed.
The 20" diameter durable polyethylene packers are mounted on a 1" shaft and
heavy-duty pillow block bearings.
I N D E P E N D E N T P O LY M O U N T E D PA C K E R S
Independent poly-packers provides even packing behind your 8810/8910 or
9400. Each wheel is mounted on a gang with its own spring cushion and sealed
ball bearings. Independent movement on each wheel ensures more uniform
packing for a more consistent crop emergence.
HEAVY-DUT Y MOUNTED PACKERS
Achieve near-drill like packing results with your 10" spaced 8810/8910 seeding
system. The 22" diameter packers are available in 2-¼" & 3-½" steel, 2" & 3"
semi-pneumatic, and 5-½" wide pneumatic wheels. Mid Row Banders, or a
weight kit are required to offset the weight of the packers.
T I TA N ™ Q U I C K - D E TAC H A R M
Bourgault Titan Quick-Detach Arms are
designed for quick and easy attachment or
interchange of mounted harrows and packers
to accomplish various operations with the
same unit. You can manually adjust the
down-force on each arm, and the two-stage
spring arrangement ensures the set downforce remains constant regardless of the
mounted option.
6000
MID HARROW®
BRIDGING THE GAP BETWEEN
REGULAR & HEAVY HARROWS
BEST OF BOTH WORLDS
The Double Acting Cable design provides the benefits of a cable and solid draw
without any negative effects. Cables linking the wing booms to the front of the hitch
take the working draft loads, and a pair of additional cables at the rear of the bar limit
the forward movement of the wing booms.
Standing stubble is invaluable
to help trap snow for moisture,
and help lock soil down to
EASY TO ADJUST AND CONTROL
prevent erosion. The 6000 Mid-
The 6000 Mid-Harrow provides hydraulic control of down-force and section angle.
Spring-loaded heavy-duty extension springs eliminate harrow bouncing even at high
operating speeds. Tine angle is manually set from 41° to 81° on each harrow section,
and the level of each section is automatically set as the tine angle is changed. Highly
visible indicator gauges allow you to see at a glance how the bar is adjusted, making it
easy to return to previous settings when adjusting to changing field conditions.
Harrow allows you to manage a
wide range of residue conditions
for trouble-free seeding, yet
preserve the standing stubble for
moisture retention and seedling
EXTENDED TINE LIFE
protection. You can also set
When the harrow tines are worn down, you can adjust the running gear to extend the
tine life for an additional 4-½". Another example of how Bourgault products allow you
to maximize the return on your equipment investment.
it for post-seeding harrowing
without fear of dislodging
planted seeds. The 6000 MidHarrow will be the most versatile
harrow you’ll ever own.
6000 MID HARROW SPECIFICATIONS
MODEL
6000-90
(All Sizes)
Tire
Transport Length
50'4"
60'4"
Transport Width
11'3"
11'3"
Main Frame
Standard 11L x 15 FI C, Optional 16.5L x 16.1, 6-ply
10'3"
10'3"
Wings (Transport & End Wheel)
11L x 15 FI C
7,500 lb
10,000 lb
Transport Height
Weight
6000-70
Tines
Standard (7/16" x 20" straight on 5 rows)
Tine Spacing
2" Effective Spacing
7200
72
00
HEAVY HARROW
COMPLETE ON-THE-GO CONTROL
The 7200 Heavy Harrow has
Tine angle, down force and harrow section angle are hydraulically controlled for on-the-fly adjustment in
variable straw conditions. Highly visible gauges indicate settings.
the ability to make all of the
adjustments on the go: tine
angle, down pressure, and section
angle. While other farmers
using competitive units are
SPRING-LOADED HARROW SECTIONS
either making straw piles, or are
Heavy-duty spring-loaded harrow sections allow you to apply aggressive field settings. Individual sections
will trip out if an obstacle is passed over, protecting the harrow from excessive wear and impact damage.
The spring-loaded sections also eliminate harrow bounce to accommodate high operational speeds.
stopped and out of the cab trying
BEST OF BOTH WORLDS
7200 HEAVY HARROW SPECIFICATIONS
The Double Acting Cable design
provides the benefits of a cable
and solid draw without any
negative effects. Cables linking
the wing booms to the front of the
hitch take the working draft loads,
and a pair of additional cables at
the rear of the bar limit the forward
movement of the wing booms.
MODEL
7200-48
7200-60
7200-72
7200-84
40'5"
46'5"
52'5"
58'5"
10,350 lb
12,450 lb
13,780 lb
Transport Length
to make manual adjustments,
you are already moving off to the
next field, confident that your
land is ready for seeding.
Transport Width - 14'2"
Transport Height - 11'
Weight
8,360 lb
Tires
Main Frame
16.5L x 16.1 (Standard), 6-ply Main Frame (Optional)
21.5 x 16.1, 10-ply (c/w HD height adjusts)
Wings
11L x 15, FI C
Tines
Standard - 9/16" x 26", Optional - 5/8" x 26"
Tine Spacing
2.4" Effective Spacing
1200
12
00
GRAIN CART
No other grain cart provides
the same features as the 1200.
The turret-style unloading auger,
high floatation running gear, low
hitch load and strong truss frame

allows you to keep the grain
moving and combines threshing,
particularly in tough field
conditions.



Eight floatation tires on a double walking axle
assembly (front to back and side to side) will carry
a full load at a low 38 psi with maximum stability
and allow fast travel even in rough or wet fields.
Choose from the 21.5L x 16.1 14-ply highway or
lug style tires.
The designed loaded hitch weight of only 3,200 lb
will create less wear and tear on the tractor.
Working lights are standard for operator safety at
night and during transport.
The unique turret-style auger allows producers to
place grain accurately and top the load without
riding the tractor clutch. Because of the near
horizontal position of the auger, there is virtually
no chance of contact with the truck box.



The efficient truss design is more than strong
enough to take a full load through wet fields and
uneven terrain.
A unique soft start belt drive system is used
to engage the drag auger and ensure smooth
operation.
An optional electronic weight scale and printer
allows you to track and record yields and inventory
accurately.
1200 GR AIN CAR T SPECIFICATIONS
Tank Capacity
1,200 bu
Max Content Capacity
82,000 lb
Cart Weight, Empty
15,300 lb
Est. Loaded Tongue
3,200 lb
Auger Size
18"
Hitch Type
Single
MinImum Tractor H.P.
200 hp
Tire Options
21.5L x 16.1 14-Ply
Highway Service
21.5L x 16.1 14-Ply
Lug
Roll Over Tarp
Optional
Loadcell Scales
Optional
Unloading Rate
350 bu/min @ 800 PTO rpm
5925
CONE
BOTTOM
A I R C O U LT E R D R I L L
LIQUID FERTILIZER CART
HIGH QUALITY LIQUID FERTILIZER CADDY





The Bourgault Cone Bottom LFCs are available in 1800, 2400, or 3000 US
Gallon sizes.
The LFC incorporates a 5th wheel style front axle, with a highly durable polymer
wear pad separating the large plates. The front axle pivots on a lubricated pin
and bushing system that offers a long life and trouble-free operation.
A heavy-duty electric clutch engages the ground driven pump. The operator
does not have to manually disconnect a drive shaft for transport, which is the
case on some competitive units.
You have a choice between a 34 gpm or 68 gpm rate ground driven piston
pump.
The optional 3" mounted transfer pump with Honda 6.5 hp engine will fill the
tank in minutes.
B O U R G A U LT 5 9 2 5 A I R C O U LT E R D R I L L
The 5925 ACD produces ultra-low soil disturbance when seeding into even the most
challenging conditions.




The large 20-½" diameter coulter disks are effective at cutting through tough field
residue such as corn, sunflower, or soybean stubble.
Seed directly into pasture land without pre-working the soil, allowing you to
minimize soil disturbance and preserve existing moisture.
The all-coulter 5925 creates less soil throw, allowing you to seed effectively at
higher speeds than conventional air hoe drills.
Equip the 5925 with MRBIII applicators for optimal location of nitrogen fertilizer in a
one-pass seeding operation.
The Model 5925 Air Coulter Drill is comprised of a coulter assembly which utilizes
strong cast components designed specifically for the rigours of direct seeding.
5 9 2 5 A I R C O U LT E R D R I L L S P E C I F I C AT I O N S
MODEL
5925-42
Working Widths 9.8" Spacing
Weight*
5925-52
42'6"
52'3"
12.6" Spacing
42'
54'7"
9.8" w MRBIII
31,700 lb
40,250 lb
12.6" w MRBIII
28,650 lb
37,200 lb
Packer Options Steel 2-¼", 3-½", 4-½" / Rubber 3"
T H E B O U R G A U LT C O M M I T M E N T T O S U P E R I O R P R O D U C T S A N D S E R V I C E .
58
FIVE YEAR
LIMITED WARRANTY
5-Year Limited Warranty Repair Period and Remedies
One Year - 100% Parts & Labour.
Two Years - 100% Parts on Bourgault manufactured components.*
Three Years - 50% Parts on Bourgault manufactured components.*
Five Years - 100% Parts & Labour on tillage or air drill structural frame(s).
* Does not include tillage or air drill structural frame(s).
Extended Warranty
Steel Metering Augers - 100% parts against wearing past 10% of the original diameter for the life
of the air seeder (corrosion not included).
Plastic Metering Augers - 100% parts against wearing past 10% of the original diameter for the
first five years, then 50% parts after five years, for the life of the air seeder.
Tillage, or, Air Drill Shanks - 100% parts against breakage for five years, then 50% parts after five
years, for the life of the unit. Bent shanks are warranted 50% parts for the lifetime of the unit.
NOTE: The Bourgault Warranty Policy takes effect at the time of delivery of new, unused, equipment to the first retail purchaser. The warranty policy may
change at any time without prior notice from Bourgault. This warranty applies to North American equipment only. Refer to the Bourgault website, or, your
local Bourgault Dealer for detailed warranty information.
B O U R G A U LT I N D U S T R I E S LT D .
(U.S. Division)
PO Box 1118
3915 North Broadway
Minot, ND U.S.A. 58702
(Canadian Division)
PO Box 39
1 mile North, Hwy. 368
St. Brieux, SK Canada S0K 3V0
www.bourgault.com
Printed in Canada - 07.11
Every effort has been made to produce this catalogue with the most
current information possible. However, ongoing product development and
improvements mean that the equipment and specifications are subject to
change without notice. Equipment subject to local availability. Please
contact your Bourgault representative for additional information.

Bourgault 2012 Product Catalogue

Transcription

Similar documents

6700ST - Bourgault

Spring 2004 Cutting Edge

Direct Seeding with a Tractor-Mounted Seeder

2003 Product Catalogue

SS100 Series Sure Stand Alfalfa Seeder

Bourgault Product Catalogue 2011

AUSTRALIAN P R O D U C T CATALOGUE

spring news - Starke Ayres

BOURGAULT Product Catalogue 2016

P R O D U C T C A T A L O G U E

Land scape maintenance combinations

Pool of Radiance^Codewheel