Smith/ACO 10” Wide Polymer Concrete Trench Drain Systems

Transcription

Smith/ACO 10” Wide Polymer
Concrete Trench Drain Systems
Figure #9898
Figure #9806
Figure # 9878
Figure #9896
Figure # 9898 Non-Sloped with Integral Metal Rail for Shallow General Purpose Applications
Figure # 9806 Non-Sloped with Ductile Iron Rail for Shallow Extra Heavy Applications
Figure # 9878 Pre-Sloped with Ductile Iron Rail for Extra Heavy Applications
Figure # 9896 Pre-Sloped with Integral Metal Rail for General Purpose Applications
Smith/ACO 9896 Trench Drain
10” Wide Pre-Sloped Polymer Concrete Surface Drainage System
Shopping Malls
Figure # 9896
Integral Metal Rail
Trench Drain System
The 9896 system is a 10”
wide pre-sloped trench
drain for general purpose
applications. Several styles
of grating from load class
A to load class E make it
possible to use the 9896 in a
wide variety of applications.
For grating options, see
pages 9.
Pre-Sloped Trench Drain System with Integral
Metal Rail for General Purpose Applications
Features
• Up to 40 (1 meter) sloped channel sections and (1 meter and 1/2 meter)
non-sloped channel sections
• 8” inside width—wider flow area for higher discharge rates
• Grates are secured with patented QuickLok® boltless locking system
• Galvanized edge rail regularly furnished; stainless steel rail
optionally available
• Three catch basin options—9896-902, 9896-621 or 9896-631
•Built-in slope of .5%
Typical Applications
Parking Lots and Garages
Shopping Malls
Pedestrian Areas
Commercial Areas
9880-680-IW Iron
Wave Grate Shown
1
JAY R. SMITH MFG. CO. 800.467.6484 www.jrsmith.com
QuickLok® is a registered trademark of ACO Polymer Products, Inc.
Catch Basins
631 Riser
Regularly Furnished:
1 meter (3.28’) precast polyester concrete
channel of interlocking design with a builtin slope of .5%. Channel has an integral
metal rail, radiused bottom and 8”internal
width. Supplied with secured grate as per
specification.
NOTE: This trench drain system is
designed for “On Grade Applications
Only” as there are no provisions for a
flashing flange or flashing clamp.
9896-902
In-Line Catch Basin
9896-621 Catch Basin
(9896-631 shown with
optional riser)
2
10” Wide Non-Sloped Polymer Concrete Surface Drainage System
Parking Lots and Garages
Figure # 9898
Integral Metal Rail
Shallow Trench Drain
System
The 9898 system is a 10”
wide non-sloped trench drain
for shallow depth applications.
Several styles of grating from
load class A to load class E
make it possible to use the
9898 in a variety of shallow
depth applications.
pages 9.
Non-Sloped Trench Drain System with Integral Metal
Rail for Shallow General Purpose Applications
Features
• 3.94” invert depth for applications in shallow areas
• 8” inside width
• 4” and 6” bottom knockouts on each channel section.
• Grates are secured with patented QuickLok® boltless locking system
• Galvanized edge rail regularly furnished; stainless steel rail
optionally available.
Parking Decks
Elevated Slabs
Retrofit Projects
Threshold Applications
9890-647-SSADA Stainless
Steel Grate Shown
3
1 meter (3.28’) precast polyester concrete channel of
interlocking design with no slope. Channel has an
integral galvanized steel metal rail and 8”internal width.
Supplied with secured grate as per specification.
NOTE: This trench drain system is designed for “On
Grade Applications Only” as there are no provisions
for a flashing flange or flashing clamp.
4
10” Wide Pre-Sloped Polymer Concrete Surface Drainage System
Airports
Figure # 9878
Integral Ductile Rail
Trench Drain System
The Smith/ACO 9878
is a 10” wide pre-sloped
heavy duty trench drain
for use in heavy commercial
and heavy industrial
applications. A ductile iron
edge rail and extra heavy
duty ductile iron slotted
load class F or ADA compliant
load class E grates enable
this trench drain to handle
heavy loads.
pages 9.
Pre-Sloped Trench Drain System with Ductile
Iron Rail for Extra Heavy Applications
Features
• Up to 40 (1 meter) sloped channel sections and (1 meter and 1/2 meter) non-sloped channel sections
• Integral cast-in extra heavy duty ductile iron edge rail
• Grates are secured with patented PowerLok® boltless locking system
• Three catch basin options—9878-902D, 9878-621D or 9878-631
•Built-in slope of .5%
Airports
Highways
Docks & Ports
Military Bases
Truck Stops
Integral Ductile
Iron Edge Rail
9878-M Slotted Ductile
Iron Grate Shown
5
PowerLok® is a registered trademark of ACO Polymer Products, Inc.
Catch Basins
631 Riser
1 meter (3.28’) precast polyester concrete
channel of interlocking design with a built-in
slope of .5%. Channel has an integral ductile
iron edge rail with a radiused bottom and
8”internal width. Supplied with secured
ductile iron slotted grates.
NOTE: This trench drain system is designed
for “On Grade Applications Only” as there
are no provisions for a flashing flange or
flashing clamp.
9878-902D
In-Line Catch Basin
9878-621D Catch Basin
(9878-631 shown with
optional riser)
JAY R. SMITH MFG. CO. 800.467.6484 www.jrsmith.com 6
10” Wide Non-Sloped Polymer Concrete Surface Drainage System
Docks & Ports
Figure # 9806
Integral Ductile Rail
Shallow Trench Drain
System
The 9806 Shallow Drain
System is a 10” wide
non-sloped heavy duty
trench drain for use in heavy
commercial and heavy
industrial applications. A
ductile iron edge rail and
extra heavy duty ductile iron
slotted load class F or ADA
compliant load class E grates
enable this trench drain to
handle heavy loads.
Non-Sloped Trench Drain System with Ductile
Iron Rail for Shallow Extra Heavy Applications
Features
• 3.94” shallow invert depth
• 8” inside width
• Integral cast-in extra heavy duty ductile iron edge rail
• Grates are secured with patented PowerLok® boltless locking system
• Cast in sealant groove
Airports
Highways
Docks & Ports
Military Bases
Truck Stops
pages 9.
9806-M Slotted Grate Shown
7
1 meter (3.28’) precast polyester concrete channel of
interlocking design with no slope. Channel has an
integral ductile iron edge rail and 8”internal width.
Supplied with secured ductile iron slotted grates.
NOTE: This trench drain system is designed for “On
Grade Applications Only” as there are no provisions
for a flashing flange or flashing clamp.
8
Smith/ACO 9896 and 9898 Grates
The 9896 & 9898 grates feature the QuickLok® Boltless Locking System
Grate Options
9880-647-SSADA
Load class “A”
13/16 x 3/16 longitudinal
stainless steel slot bar
grate. Available in 1 meter
or ½ meter lengths.
9880-605-GM
Load class “C”
galvanized steel mesh
grate. Available in 1 meter
9880-611-GP
Load class “C”
Galvanized steel perforated
Available in 1 meter
9880-661-M Slotted Ductile Iron
Load class “E”
Black duco coated ductile
iron slotted grate.
Available in ½ meter lengths.
9880-678-MADA
Load class “E”
Black duco coated ductile
iron longitudinal slotted
ADA compliant grate.
Decorative Grates
9880-679-MD MOSAIC Ductile
Iron Load class “C”
Black duco coated ductile iron
grate with mosaic pattern,
designed for heavy-duty loads.
9880-630-SSM
Load class “C”
stainless steel mesh grate.
Available in 1 meter or
½ meter lengths.
9880-680-IW Iron Wave
Load class “C”
A decorative grate for
heavy-duty applications.
9880-665-SSP
Load class “C”
Stainless steel perforated
Available in 1 meter or
½ meter lengths.
9880-681-ID
Load class “C”
Black duco coated ductile iron
Grate with decorative pattern.
Smith/ACO 9878 & 9806 Grates
The 9878 & 9806 systems are sold as an assembly with either load class “F” ductile iron slotted (-M) or
load class “E” ductile iron ADA slotted –(ADA) grates secured with PowerLok® boltless locking system.
9
Ductile Iron Slotted (-M)
Load Class “F”
Ductile Iron ADA
Slotted –(ADA)
Load Class “E”
Smith/ACO QuickLok® and PowerLok®
Locking Systems and Accessories
QuickLok® Boltless
Locking System
1.
Patented PowerLok® Boltless
Locking System
2.
Insert locking bar into channel’s
locking pockets and secure by
inserting shims on both sides.
3.
1.
The locking force is sufficient to
hold grates in place up to load
Class E.
To lock grate in place, insert -GRT tool into clip and pull.
3.
4.
There is no need for tools to fasten the grate into the channel. The grate
snaps into place with a quick impact.
2.
4.
To remove grate, place the -GRT tool between the grate clip and the trench
rail and rotate clockwise. Clip will release easily.
Accessories
9898
9896
9878
9806
9896 and 9878 Inlet/Outlet Closing
Universal End Caps
9898 and 9806 Universal End Caps
Grate Removal Tool -GRT
Designed to ease the removal of
grates from trench drainage system.
QuickLok® Boltless
Locking Bar
Installation Device
Works with 9896, 9898, 9878,
and 9806
ACO Bond - P (Polyester)
Polymer Joint sealant for use with
polyester polymer concrete channels.
ACO-Bond sealant is available in
2 1/2 lb. size, enough for 25 joints. 10
“What sets us apart from competitors
is our engineering and spirit. We have
a ‘can-do’ spirit. If you ask us to do
something, we will do it or figure
out how to do it. That’s the part our
customers like, that’s the part we like.”
- Don Morris, President and CEO
SPM0335-1405

Smith/ACO 10” Wide Polymer Concrete Trench Drain Systems

Transcription

Similar documents

PVCeptor® Reservoir Dog™

Commercial Trench Drains

Keeping the Community Moving

Bartop Brochure

Thyssen Flow 2 - Only Lifts Ltd

Hy-rail for backhoe loaders

Steel Cattle Guard

What`s down the track forum 2012

Accentuation - LUX ELEMENTS