Final Program (Oct. 27, 2013)

MJJIS2013
MJIIT-JUC Joint International Symposium 2013
A memorial event celebrating the 40th Year of ASEAN-Japan Friendship and Cooperation
Nov. 6-8, Shonan Campus, Tokai University, Hiratsuka, JAPAN
Organized by
JUC (Japanese University Consortium)
MJIIT (Malaysia-Japan International Institute of Technology)
Supported by
Tokai University
Universiti Teknologi Malaysia
MEXT (Ministry of Education, Culture, Sports, Science and Technology in Japan)
MOFA (Ministry of Foreign Affairs of Japan)
JICA (Japan International Cooperation Agency)
Welcoming Messages from General Co-chairs
It is my great pleasure to welcome all participants to this MJIIT-JUC Joint
International Symposium 2013 (MJJIS2013), which is a memorial event
celebrating the 40th Year of ASEAN-JAPAN Friendship and Cooperation. This
symposium is held at Tokai University, Hiratsuka, Kanagawa, JAPAN between
November 6th and 8th.
Japan University Consortium consists of 25 Japanese universities
participating not only in steering of this symposium but also in the
establishment and further development of MJIIT.
International collaboration nowadays has been a widely acknowledged,
research trend. In such research endeavor, multi-cultural and interdisciplinary
atmosphere is a key factor to incubate challenging spirits and supporting environment for pioneering
a new research field. This symposium exactly serves such a purpose because the main objective of
the symposium is to promote communication and dialogue among young researchers, engineers and
students from different countries.
This symposium covers the fields of Electronic Systems Engineering, Mechanical and Precision
Engineering, Environmental and Green Technology, Management of Technology, Information
Technology and Communications, and Medical Biotechnology. Three keynote speeches and
approximately 190 research papers will be presented.
I would like to take the opportunity to thank the researchers and postgraduate students for their
contribution and dedication to MJJIS2013. I also would like to express my sincere gratitude to all
of the hardworking committee members and the secretariat for materializing this symposium. Last
but not least, our special appreciation goes to MOFA, MEXT, and JICA for giving their strong
support for MJJIS2013.
Hiromu Hashimoto, Professor
Vice Chancellor, Tokai University
Both the Malaysian and Japanese governments have established the
Malaysia Japan International Institute of Technology (MJIIT) with the aim to
provide engineering education with greater emphasis and focus towards the
ASEAN region. The formation of MJIIT is the climax of the first wave of the
Look East Policy observed by Malaysia. MJIIT is liken to a “Japanese
University” operating off shore, in Malaysia, which is considered unthinkable
in the past. The support from a consortium of 25 Japanese Universities (JUC),
organized through the Japanese Ministry of Foreign Affairs (MoFA), is indeed
immense in ensuring that Japanese style engineering education is
established, and inculcating and deeply rooting the Japanese work culture.
The cooperation, which started well before 10th August 2010, the official launching date of the MJIIT,
has seen a tremendous growth and stability with respect to the placement of Japanese academic staff
at MJIIT and undertakings of joint supervision of postgraduate students, in strengthening the
teaching and research thrust at MJIIT.
The joint symposium between MJIIT and JUC is indeed amalgamating further the established
strong linkages. It is a pleasure to note that this second symposium between the MJIIT and the JUC
is organized by Tokai University, as a continuing effort to bring academic staff and students from
participating universities as well as outside the consortium to discuss on advanced research and
development work carried out. It is also worth noting that this platform of MJIIT-JUC International
Symposium (MJJIS) is part of the celebration of the 40th year of ASEAN-Japan Cooperation.
Finally, I would like to thank the MJIIT-JUC committee and the local organizing committee from
Tokai University for making this symposium a reality, continuing from the first symposium at MJIIT
in 2012. I am indebted to Professor Hashimoto for bringing the 2013 MJJIS to this lovely campus of
Tokai University. To all paper presenters and participants, I would like to wish an interesting and
fruitful symposium! Arigato gozaimasu.
Megat Johari Megat Mohd Noor, Professor
Dean of MJIIT
We welcome all participants attending MJIIT-JUC Joint International
Symposium 2013. This is the second symposium jointly organized between
MJIIT and Japanese University Consortium (JUC). MJIIT prepares unique
educational programs for undergraduate and graduate students and staff with
support by 25 Japanese universities in order to become the only one
organization in ASEAN. Promotion and recommendation to attend this
symposium for students and staff is a typical example of those programs. One
of objectives of this symposium is to provide opportunities to young researchers
and students of both MJIIT and Japanese universities to establish the
networks and to breed seeds of collaboration among researchers. MJJIS2013
will surely provide all symposium participants with the opportunity to discuss together topics such
as university-industry collaboration, technology partnership between Malaysia-Japan,
internationalization of universities, and other hot topics. It will be required that young students and
researchers absorb and assimilate a variety of knowledge from foreign countries in those proceeding
research fields and that they utilize those information in regeneration and activation for own nations.
From this view point, MJJIS2013 will offer an adequate opportunity to promote and accelerate the
face-to-face relationship for exchange of information.
I would like to express sincere thanks to all committee members and the secretariat, especially,
Professor Yoshio Yamamoto and Tokai University for preparing this valuable and important
symposium.
Takashi Yamamoto, Professor
Deputy Dean (Liaison and Internationalization) of MJIIT
Organizing Committee
General Co-chairs
Hiromu Hashimoto (Tokai University), Megat Johari Megat Mohd Noor (MJIIT), Takashi Yamamoto (MJIIT)
Technical Program
Yoshio Yamamoto (Tokai University), Ryu-ichiro Ohyama (Tokai University), Masao Kohzaki (Tokai University),
Hideyuki Horisawa (Tokai University), Ai Kotani (Tokai University), Azran Azhim Noor Azmi (MJIIT),
Hafizal bin Yahaya (MJIIT)
Publicity
Osamu Uchida (Tokai University), Masayuki Morimoto (Tokai University), Kazumi Terada (Tokai University),
Kentaro Takemura (Tokai University), Naoki Oshima (MJIIT), Toshio Wakabayashi (MJIIT)
Finance
Kunio Okimura (Tokai University), Satoru Iwamori (Tokai University), Akihiko Azetsu (Tokai University)
Local Arrangement
Masayuki Ochiai (Tokai University), Kazuyoshi Tsuchiya (Tokai University), Shinjiro Umezu (Tokai University),
Registration
Yuta Sunami (Tokai University), Tsutomu Sekine (Tokai University)
JUC Committee
Kyushu University, Keio University (Shinnosuke Obi), Saitama University (Takeshi Mizuno),
Shibaura Institute of Technology (Masahiko Tachibana), Takushoku University (Yuji Watanabe),
Tokai University (Yoshio Yamamoto),
Tokyo University of Agriculture and Technology (Yoshiyuki Yamashita, Koji Ikeda),
Nagaoka University of Technology (Kanji Yasui), Nagoya Institute of Technology (Yutaka Tada),
Japan Advanced Institute of Science and Technology (Akio Makishima), Meiji University (Jun Sakakibara),
Ritsumeikan University (Masahisa Koyama), Ritsumeikan Asia Pacific University,
Osaka University (Masaharu Imai, Toshihiro Tanaka), Yamaguchi University (Yoshiyuki Matsuura),
Kinki University (Takayoshi Kimura), Tokyo University of Technology (Hiroyuki Kameda),
Tokyo Denki University, Tokyo University of Science, Okayama University of Science (Toshiaki Kaneeda),
Kyushu Institute of Technology (Kenichi Urabe), Kanazawa University (Minoru Yamada),
Toyohashi University of Technology, Yamagata University (Kenji Inoue), University of Tsukuba (Yoshihiro Shiraiwa)
Reviewers
Kiyoshi Ando, Hidenori Aoki, Masaki Asobe, Akihiko Azetsu, Bidisha Chanda, Zhili Chen, Kazuhiko Hamamoto,
Nao Hodoshima, Hideyuki Horisawa, Koji Ikeda, Satoru Iwamori, Yoshihiro Kai, Mitsuhiko Karashima, Takeo Kato,
Hiroshi Kimura, Kiyoteru Kobayashi, Masao Kohzaki, Ai Kotani, Hirosi Kuwahata, Kazushige Magatani,
Akio Makishima, Yoshiyuki Mastuura, Takeshi Mizuno, Masayuki Morimoto, Shinnosuke Obi, Masayuki Ochiai,
Jun Ogata, Hirokazu Ohtagaki, Ryu-ichiro Ohyama, Hiroo Okanaga, Kunio Okimura, Atsushi Okuyama,
Kazuki Okuyama, Jun Sakakibara, Tsutomu Sekine, Takehisa Shibuya, Yuta Sunami, Masakazu Suzuki,
Yutaka Tada, Syun Takahashi, Kentaro Takemura, Kazuyoshi Tsuchiya, Osamu Uchida, Shinjiro Umezu,
Yuji Watanabe, Minoru Yamada, Natsuko Yamakawa, Yoshio Yamamoto, Yoshiyuki Yamashita, Kanji Yasui
Map of Shonan Campus, Tokai University
East Gate
Keiji-mon Gate
North Gate
#17 Building
(Nexus Hall,
Room A, B,
Registration Desk)
South Gate
#12 Building
(Room C, D, E, F)
COM SQUARE
(Banquet)
Floor Maps
2nd Floor, #17th Building
Nexus Hall
Room A
stairs
Room B
elevator
men's toilet
5th Floor, #12th Building
men's toilet
women's toilet
women's toilet
Room F
Room E
elevator
Room D
Room C
Time Table
Wednesday, Nov. 6, 2013
10:00-11:00
Nexus
Hall
11:00-11:40
11:40-12:00
12:00-14:00
14:00-15:40
MB-1
15:40-16:00
16:00-17:40
Poster
Session*
Room A
Room B
Room C
Room D
Room E
Opening Ceremony [Nexus Hall]
Keynote Speech I [Nexus Hall]
Prof. Megat Johari Megat Mohd Noor (MJIIT)
Photo Session [Nexus Hall]
Lunch [Room C]
MP-1
ES-1
IT-1
EG-1
Coffee Break
MT-1
MP-3
ES-2
(15:40-17:40)
Room F
MP-2
MP-4
Banquet [Com Square]
18:30-20:30
Thursday, Nov. 7, 2013
9:30-10:10
10:10-10:50
10:50-11:20
11:20-13:00
13:00-14:00
14:00-15:40
15:40-16:00
16:00-17:40
18:00-18:30
Special
Session*
MB-2
Keynote Speech II [Nexus Hall]
Prof. Ai Kotani (Tokai University)
Keynote Speech III [Nexus Hall]
Dr. Tadaaki Nagao (National Institute for Materials Science)
Coffee Break
MP-5
MP-7
MP-9
ES-3
ES-4
Lunch [Room C]
IT-2
EG-2
MP-6
IT-3
EG-3
MP-8
EG-4
MP-10
Coffee Break
ES-5
MT-2
IT-4
Closing Ceremony [Nexus Hall]
Friday, Nov. 8, 2013
Optional: Factory visit tour (Fuji Film Corporation)
Technical Sessions:
ES: Electronic System Engineering
MP: Mechanical and Precision Engineering
EG: Environmental and Green Technology
MT: Management of Technology
IT:
Information Technology and Communications
MB: Medical Biotechnology
Special Session: Japanese-Style Human Resource Development in ASEAN Countries
Room A: Seminar room 1, #17 Building,
Room C: Conference room1, #12 Building,
Room E: Conference room3, #12 Building,
Room B: Seminar room 2, #17 Building
Room D: Conference room2, #12 Building
Room F: Conference room4, #12 Building
* Poster Session and Special Session are open to public. Everybody is welcome to attend without a
registration fee.
Keynote Speech I
Teaching and Research Challenges at
Malaysia Japan International Institute of Technology
(MJIIT)
Megat Johari Megat Mohd Noor
Malaysia Japan International Institute of Technology
Universiti Teknologi Malaysia
Abstract
The idea of setting up MJIIT was mooted in 2000 by then the Prime Minister of Malaysia, Mahathir
Mohamed, who has been instrumental in forging Malaysia’s Look East Policy in the early 1980s. The
Look East Policy has attained its 30th anniversary and had produced many Malaysian graduates
from Japanese and Korean universities. Initially, Mahathir Mohamed envisaged the establishment
of a Japanese university on Malaysian soil, such as the likes of British and Australian universities
operating in Malaysia. The discussion at times became cold and the idea of setting of a Malaysia
Japan institution was reactivated again in 2006 with an anticipated acronym MAJU (Malaysia
Japan University).
Due to the enormous cost in establishing another public university to the existing 20, as the
Japanese government wanted this entity be a public institution instead of a private one, it was
scaled down to an institute with an acronym MJIIT (Malaysia Japan International Institute of
Technology). MJIIT was established on 10th of August 2010 and allocated within the Kuala Lumpur
Campus of Universiti Teknologi Malaysia (UTM), with funding coming directly from the then
Malaysia Ministry of Higher Education (now Ministry of Education).
The MJIIT project is worth over MYR 800 million excluding emolument, to be developed over a
period of seven years. JICA has been designated as the implementing agency for the Japanese
government and UTM for the Malaysian government. MJIIT governance is thus that of the UTM and
MJIIT is answerable to the UTM senate, but having a special Advisory Committee comprising
Malaysian and Japanese representatives.
Although MJIIT is to be a research focus entity, it is also expected to undertake teaching of
undergraduate students. Four major disciplines agreed upon are namely; Mechanical Precision
Engineering, Electronic Systems Engineering, Environment and Green Technology, and
Management of Technology. The first three are engineering and the latter is management oriented.
Presently, full research programmes (PhD and MPhil), two Master programmes and three
undergraduate programmes are on offered, with student enrolment reaching nearly 600 students
and academic staff strength exceeding 70. MJIIT is on track with regard to its blueprint for
development on staffing and student enrolment.
The KES model; knowledge, experience and self-learning, is a unique learning model adopted at
MJIIT with greater emphasis placed on industry involvement. Ningen Ryoku subjects to help built
the human skills becomes the signature of the undergraduate programmes and rinkou for the
postgraduate students.
Students are encouraged to undertake academic outbound in the form of internship, research
attachment, transfer credits or short visits to Japan. This is part of the effort to expose students
further to the Japanese work culture. It is MJIIT’s noble mission to inculcate the Japanese work
culture apart from becoming an excellent teaching and research institute in advanced technology.
Efforts to ultimately establish over 40 innovative kozhas (ikozhas) are ongoing and presently there
are 13 ikozhas in operation. Undergraduate students are highly encouraged to be involved with the
ikozhas, to develop the interest for research much earlier, and eventually continue their studies at
the ikozhas. The emphasis on sustainability is beyond doubt and a challenging one, with its tag line
“Engineering the Nation with Precision towards Sustainable Development”.
The MJIIT undertaking is a challenging task of “Japonising” an education institution while striving
for excellence in research and development. It has to begin with all the academic, technical and
administrative staff of MJIIT, leading by example, and infused in the students through the
environment and work ethics.
With the medium of instruction in English, it makes the effort to be a “Japanese university in
Malaysia” even more challenging. On the other hand, MJIIT is a melting pot for internationalization
with its English medium. It is the only public entity that is allowed to take in up to 40% foreign
students, unlike the norm of less than 10% for all public universities in Malaysia.
The presentation will highlight the plan, possible collaborations and challenges faced by the newly
developed MJIIT, which is aspiring to be a leader in education and research in advanced technology
in the ASEAN region within seven years.
Keynote Speech II
Lesson from a Trial for Cooperation of
Medicine and Engineering
Ai Kotani
School of Medicine
Tokai University
Abstract
“Collaboration between different fields” is recently claimed as a critical factor for development of
science and innovation of technology. It is sure that sometimes it happens in case of collaboration,
something different stimulates each other and makes some big chemical reaction. What is the key
factor for such a big success happening to them? Dr. Shinjiro Umezu from School of Engineering of
Tokai University developed the unique cell printing method by using ink jet which is called “PELID”
and studies the basic research of regeneration of the whole organ by patterning cells using the
PELID method. I, from School of Medicine of Tokai University, am studying the interaction
between tumor and non-tumor cells in the human lymphoma and the final goal of the research is to
develop the novel therapy against lymphoma by regulating the non-tumor cells. In 2012, we met each
other and now we are doing the project which is called “Reconstitution of human lymphoma tissue in
vitro”. Before we started the collaboration, we had experienced a lot of things like understanding
each other, sharing each own knowledge, participating in each other events (cooperation for the
events for each other), and making a good human relationship. I would like to introduce our trial
(and error) project which we are doing for last one and half year and trying to take lessons from it.
Keynote Speech III
Plasmon-enhanced Vibrational Spectroscopy
for the Detection of Dilute Bio-molecules and
Toxic Substances in Water
Tadaaki Nagao
Group Leader, Nano-system Photonics Group
National Institute for Materials Science (NIMS)
Abstract
Surface plasmon polaritons and its low-dimensional variants as well as their confined standing
waves (antenna resonances) have become increasingly important in nanotechnology since their
optical properties are strongly dependent on the size and the shape of the small objects. This
perfectly fits to the directions of nanotechnology which is to provide appropriate building blocks to
embody nano-architecture with desired functions for novel electronics/photonics devices. Even down
to the subnanometer-scale thin objects plasmon propagation was detected recently and revealed a
rich diversity of physics. One of the application in plamonic nano-objects are, antenna resonaces in
closed plasmonic structures (nanoparticles, nanowires, nanodisks) wich strongly coulple with light
and exhibit wide variety of applications in the field of nanophotonics, environmental science, and
light harvesting technology, by utilising the strong electromagnetic field-enhancement associated
with the antenna resonances of the optical nanoantennas. In this talk I present some fundamental
aspects of realizing plasmonic resonators with both narrow-band and broad-band optical response,
and then introduce some applications in photocatalysis as well as bio/environmental sensing with
excellent specificity and extremely high sensitivity (< attomolar sensitivity) in aqueous solution. We
introduce our recent study on the detection of mercuric ion and dioxin toxicants in environmental
water by studying the conformational change and the relevant changes in the vibrational signal
induced by the absorption of toxicants in bio-molecules which play important roles as efficient linker
molecules for detection as well as detoxical materials.
Wednesday, Nov. 6, 2013
Registration Nov. 6, Wednesday 9:00 – 17:00 Ground-floor, #17Building
Opening Ceremony Nov. 6, Wednesday 10:00 – 11:00 Nexus Hall
Chair: Prof. Yoshio Yamamoto (Tokai Univ.)
Opening Remarks
Professor Jiro Takano, Chancellor of Tokai University
Words of Welcome
Professor Hiromu Hashimoto, Vice-Chancellor of Tokai University
Ceremonial Addresses
・Mr. Yoshiaki Sato, Ministry of Education, Culture, Sports, Science and Technology,
Director for Overseas Cooperation, International Affairs Division,
Senior Analyst for Policy Information Policy Division, Minister's Secretariat
・Mr. Kenji Kanasugi, Ministry of Foreign Affairs,
Deputy Director-General, Asian and Oceanian Affairs Bureau
・Ms. Nobuko Kayashima, JICA, Director General, Human Development Department
・Prof. Masahiko Horie, Former Ambassador of Japan to Malaysia, Meiji University
・Prof. Chiken Kinoshita, Former Vice-dean of MJIIT, Emeritus Prof., Kyushu University
Keynote Speech I Nov. 6, Wednesday 11:00 – 11:40 Nexus Hall
Chair: Prof. Hiromu Hashimoto (Tokai Univ.)
Title: Teaching and Research Challenges at Malaysia Japan International Institute of
Technology (MJIIT)
Prof. Megat Johari Megat Mohd Noor (MJIIT)
Medical Biotechnology (1)
Nov. 6, Wednesday 14:00 – 15:40 Nexus Hall
Chair: Takashi Yahata (Tokai Univ.)
MB-1-1 Affection of Semiconducting and Metallic Carbon Nanotubes to Human Cell for
Biocompatibility Evaluation
Sachiko Iimori, Kagemasa Kajiwara, Minoru Kimura, Kazuyoshi Tsuchiya (Tokai Univ.)
MB-1-2 Computational Fluid Simulation in Living Body
Yosuke Otsuki, Sho Hanida (JAIST), Futoshi Mori (Univ. Tokyo.), Takeshi Nishimura (Kyoto Univ.), Hiroshi
Ohtake, Go Watanabe (Kanazawa Univ.), Shigeru Ishikawa (Kanazawa Municipal Hospital), Teruo
Matsuzawa (JAIST)
MB-1-3 Plasminogen Activator Inhibitor Type-1 is a Negative Regulator of Hematopoietic
Regeneration
Abd Aziz Ibrahim, Takashi Yahata, Toshio Miyata, Kiyoshi Ando (Tokai Univ.)
MB-1-4 In Vivo Study of Implanted Aortic Scaffolds Decellularized by Sonication Treatment
Azran Azhim, Nurul Syazwani (Univ. Tek. Malaysia), Yuji Morimoto (National Defense Medical College),
Katsuko Furukawa, Takashi Ushida (Univ. Tokyo.)
MB-1-5 Characteristics of Ago1 Specific Small RNAs: A New Functional Small RNA
Jun Ogata (Tokai Univ.), Kohei Takakura (Tokai Univ., Kitasato Univ.), Ai Kotani (Tokai Univ.)
Mechanical and Precision Engineering (1)
Chair: Akihiko Azetsu (Tokai Univ.)
Nov. 6, Wednesday 14:00 – 15:40 Room A
MP-1-1 Development of Monitoring Tool of Active Oxygen Species Using Fluorocarbon Thin Film -
Etching Behavior of Sputtered PTFE Thin Film -
Kei Oya, Yuki Ikeda, Satoru Iwamori (Tokai Univ.)
MP-1-2 Tire Modeling For Vehicle Dynamic Analysis
Muhammad Afandi Nordin (MJIIT), Hairi Zamzuri (Univ. Tek. Malaysia), Wira Jazair Yahya (MJIIT),
Mohd Hatta Ariff (Univ. Tek. Malaysia)
MP-1-3 Application of High Frequency Air-Coupled Ultrasound To Evaluate Paper Surface
Roughness
Muhammad Nur Farhan Saniman, Ikuo Ihara (Nagaoka Univ. of Tech.)
MP-1-4 Numerical Simulation of Airfoil in Unsteady Motion
Hikaru Takano, Tatsuki Ito, Kota Fukuda (Tokai Univ.)
MP-1-5 Fuzzy-PID Controller with Parallel Structure Application in Semiactive Suspension System
Using Magnetorheological Damper
Mohammadjavad Zeinali, Saiful Amri Mazlan (MJIIT)
Electronic System Engineering (1)
Nov. 6, Wednesday 14:00 – 15:40 Room B
Chair: Yuji Watanabe (Takushoku Univ.)
ES-1-1
2-Dimensional Measurement of Electric Potential due to Spark Discharge on Water Surface
Muhammad Khairul Amzar Bin Muhamad, Nurul Shahida Midi, Ryu-ichiro Ohyama (Tokai Univ.)
ES-1-2
Simulation for Evaluation: A Study on the Performance Evaluation of WSNs MAC Protocols
Mahdi Zareei, A.K.M. Muzahidul Islam, Sabariah Baharun, Shozo Komaki (Univ. Tek. Malaysia)
ES-1-3
Neighbor Discovery in Dynamic Cluster Based Wireless Sensor Network
Asim Zeb, Nur Syazwani Ghazali, A.K.M. Muzahidul Islam, Shozo Komaki, Sabariah Baharun (Univ. Tek.
Malaysia)
ES-1-4
Slow and Variable Group Velocity in a Metamaterial Mimicking Electromagnetically
Induced Transparency
Yasuhiro Tamayama, Kanji Yasui (Nagaoka Univ. of Tech.), Toshihiro Nakanishi, Masao Kitano (Kyoto
Univ.)
ES-1-5
Electrodeposited Zinc Oxide on Graphene: Effects of Hexamethylenetetramine, Heat and
Current Density
Nur Suhaili Abd Aziz (Univ. Tek. Malaysia), Nurul Izni Rusli (Univ. Malaysia Perlis), Mohamad Rusop
Mahmood (Univ. Tek. MARA), Kanji Yasui (Nagaoka Univ. of Tech.), Abdul Manaf Hashim (Univ. Tek.
Malaysia)
Information Technology and Communications (1) Nov. 6, Wednesday 14:00 – 15:20 Room D
Chair: Osamu Mikami (Tokai Univ.)
IT-1-1
Generation Methods of Separate Points Set for mm-GNAT
Xie Pingfang, Kensuke Onishi (Tokai Univ.)
IT-1-2
Development of Artificial Biomimetic Wing of Dragonfly
Yoshiaki Tanaka, Shinjiro Umezu, Hiromu Hashimoto (Tokai Univ.)
IT-1-3
A Study on Tri-Band Notch Characteristics of A UWB Planar Antenna with Triple Slots
Elliptical Element
Siti Fatimah Jainal, Toshio Wakabayashi (MJIIT), Mohd Kamal Abd Rahim (Univ. Tek. Malaysia),
Yasuyuki Okamura (Osaka Univ.)
IT-1-4
Kernel Density Bandwidth Control for DOA Estimation in the Presence of Spatial Aliasing
Ai Kijima, Yasue Mitsukura, Nozomu Hamada (Keio Univ.)
Environmental and Green Technology (1)
Chair: Effie Papargyropoulou (MJIIT)
Nov. 6, Wednesday 14:00 – 15:40 Room E
EG-1-1 Fabrication of Titania Layer of Dye-Sensitized Solar Cell (DSC)
Kyousuke Kosugi, Yuki Shimoyama, Shinjiro Umezu, Yoshihito Kunugi (Tokai Univ.), Hitoshi Ohmori
(RIKEN)
EG-1-2 Development of Convenient Preparation Methods of Precisely Structure-controlled Pt
Nanocrystals and Their Application as Designed Catalysts for Green Technology
Mikio Miyake (JAIST), Keiko Miyabayashi (Shizuoka Univ.)
EG-1-3 Trial of Glass Recycling by Hydrothermal Processing
Masanori Suzuki, Aiman Bin Mohd Halil, Yasuo Takahashi, Toshihiro Tanaka (Osaka Univ.)
EG-1-4 Nano-structured Zinc Oxide Films Prepared by Solution Methods for Polymer-based Solar
Cell Application
Cheahli Leow (Osaka Univ.), Toshihiro Ohnishi (Sumitomo Chemical Co. Ltd), Michio Matsumura (Osaka
Univ.)
EG-1-5 TiN Film Coatings on Inner Wall of Narrow Tube for Hydrogen Impermeation
Mao Amano, Akitaka Sakai, Yuta Kohtani, Yoshihito Matsumura (Tokai Univ.)
Mechanical and Precision Engineering (2)
Chair: Hiroo Okanaga (Tokai Univ.)
Nov. 6, Wednesday 14:00 – 15:40 Room F
MP-2-1 Fabrication of Artificial Wing with Deformation and Vibration Characteristics Similar to
Dragonfly Wing
Hisayoshi Naka, Hiromu Hashimoto (Tokai Univ.)
MP-2-2 Aerodynamics of Dragonfly with Flapping and Feathering Movements
Fuma Sakai, Hiromu Hashimoto (Tokai Univ.)
MP-2-3 Solution of Dragonfly's Flight Mechanism: Interaction between Aerodynamic Force and
Current Around the Wings
Akio Kobayashi, Hiromu Hashimoto (Tokai Univ.)
MP-2-4 Flow Visualization and Aerodynamics Characteristics of a Gyroball
Gou Yagi, Hiroo Okanaga, Katsumi Aoki (Tokai Univ.)
MP-2-5 Preparation and Deformation of Tin Single Crystal
Marina Lias, Noriyuki Kuwano (MJIIT)
Mechanical and Precision Engineering (3)
Chair: Hiroyuki Moriyama (Tokai Univ.)
Nov. 6, Wednesday 16:00 – 17:40 Room A
MP-3-1 Characteristics of Swing Impact Response of Film Bearing for 2.5"HDD Spindle
Motonari Mochiduki, Masayuki Ochiai, Hiromu Hashimoto (Tokai Univ.)
MP-3-2 Measurement of Kinetic Friction between Plastic Film and Steel Roller
Yusuke Kotobuki, Yuta Sunami, Hiromu Hashimoto (Tokai Univ.)
MP-3-3 Experimental Study on the Effectiveness of Helical Strakes in Suppressing Vortex-Induced
Vibration of a Flexible Cylinder
Lee Kee Quen, Aminudin Abu (Univ. Tek. Malaysia), Naomi Kato (Osaka Univ.), Pauziah Muhamad,
Asnizah Sahekhaini, Hanida Abdullah (Univ. Tek. Malaysia)
MP-3-4 Influences of Orthogonal Lapping and Its Angle Effect on Mirror-Like Surface Finishing
Process
Aung Lwin Moe, Kanao Fukuda, Aminudin Bin Abu, Soe Phyu Lin (MJIIT)
MP-3-5 Modeling and Simulation of Magnetorheological Damper with Novel Bypass Valve
Fitrian Imaduddin (Univ. Tek. Malaysia), Saiful Amri Mazlan (MJIIT), Hairi Zamzuri (Univ. Tek. Malaysia),
Abdul Yasser Abdul Fatah (Univ. Tek. Malaysia)
Electronic System Engineering (2)
Nov. 6, Wednesday 16:00 – 17:20 Room B
Chair: Shozo Komaki (Univ. Tek. Malaysia)
ES-2-1
Low Power FPGA Design Using Dynamic Partial Reconfiguration with Power Gating
Maryam Afaf Abdul Karim, Fuminori Kobayashi, Ooi Chia Yee, Nordinah Ismail (MJIIT)
ES-2-2
Electrical Properties of VO2 Thin Films and Post-Annealing Effects on the Growth of
Non-Stoichiometric VOX
Nurul Hanis Azhan, Kunio Okimura (Tokai Univ.)
ES-2-3
A Quantum Mechanical Analysis of Free-Electron Lasers Based on Electron Wave
Representation
Hesham Fares, Minoru Yamada (Kanazawa Univ.), Kazuhito Ohmi (National Laboratory for High Energy
Physics (KEK))
ES-2-4
Influence of Growth Time and Current Density on the Morphological and Compositional of
Zinc Oxide Nanostructures Deposited on Graphene by Electrochemical
Nur Ashikyn Hambali, Hafizal Yahaya (Univ. Tek. Malaysia), Mohamad Rusop Mahmood (Univ. Tek.
MARA), Kanji Yasui (Nagaoka Univ. of Tech.), Abdul Manaf Hashim (Univ. Tek. Malaysia)
Management of Technology (1)
Nov. 6, Wednesday 15:40 – 17:40 Room C
Chair: Mohd Yusri Bin Mohd Yusof (MJIIT)
MT-1-1 Towards the Attainment of a High Income Nation by 2020: The Need for New Leadership
Styles and Characteristics in the ICT Industry in Malaysia
Mas Bambang Baroto, Mohd Taib Hashim, Sabirin bin Jaafar (Univ. Tek. Malaysia), Ahmad Rahman
Songip (MJIIT)
MT-1-2 Leadership's Effect on Creativity and Innovation: Is Japan Unique?
Shazlinda Md Yusof (MJIIT)
MT-1-3 An Innovative Thinking on the Concepts of Ex-ante Value, Ex-post Value and the Realized
Value (Price)
Saburo Horimoto (Shiga Univ.), Maulud Hj Latif (Univ. Tek. Malaysia), Mohammad Ali Tareq (MJIIT)
MT-1-4 Technology and Investment: Does Japanese Portfolio Investment in Asia Follow the Flying
Geese Model of Development?
Ian Bisset (Ritsumeikan Asia Pacific Univ.)
MT-1-5 Sustainable Balanced Scorecard as Performance Measurement System at Malaysian
Private Hospitals: A Literature Review
Ahmad Ezainuddin Badarudin, Nooh Abu Bakar (Univ. Tek. Malaysia)
MT-1-6 Influence of Screw Pile Penetration into the Ground Visualized by Infrared Thermography
Mauricio Jun Arai (System Measure Co., Ltd.), Mamoru Fujii, Ken Watanabe (Tokai Univ.)
Mechanical and Precision Engineering (4)
Chair: Hideyuki Horisawa (Tokai Univ.)
Nov. 6, Wednesday 16:00 – 17:40 Room F
MP-4-1 Effects of Flow Around Dragonfly Wing of the Glide Flying
Yutaro Kawamura, Hiromu Hashimoto (Tokai Univ.)
MP-4-2 Aerodynamics of Dragonfly's Hovering
Taisuke Sako, Hiromu Hashimoto (Tokai Univ.)
MP-4-3 Development of High-energy Propellant for Laser Microthrusters
Keisuke Kondo, Hideyuki Horisawa (Tokai Univ.)
MP-4-4 Simulation of Serpentine Flux Path in Magnetorheological Valve using Finite Element
Method Magnetics (FEMM)
Abdul Yasser Abd Fatah, Saiful Amri Mazlan (MJIIT), Tsuyoshi Koga (Yamaguchi Univ.)
MP-4-5 Generation of Acoustic Waves and Its Directivity Pattern Utilizing Evanescent Light
Kento Matozaki, Iwao Matsuya, Ikuo Ihara (Nagaoka Univ. of Tech.)
Poster Session Nov. 6, Wednesday 16:00 – 17:40 Nexus Hall
[For poster presenters]
Each poster presentation is provided with one A0 (A-zero) poster size area. Pins to put up a poster
will also be provided, but there will be neither table nor electricity. Your poster can be put up any
time after the venue becomes available. You need to take off your poster immediately after the
session is over.
PS-1
Crystalline Structure of ZNO Thin Films Grown on A- and C-Plane Sapphires Using
High-Energy H2O Generated by a Catalytic Reaction
Kanji Yasui, Eichi Nagatomi, Souichi Satomoto, Hitoshi Miura (Nagaoka Univ. of Tech.)
PS-2
Peculiar Amplification Characteristics of the Signal and Noise in the Semiconductor Optical
Amplifier
Kazuki Higuchi, Nobuhito Takeuchi, Minoru Yamada (Kanazawa Univ.)
PS-3
Optical Properties of MgF2 Composite Films Dispersed with Au or Ag Nanoparticles
Synthesized by Sol-gel Method
Shoichi Sato, Eisuke Yokoyama, Takehisa Shibuya, Moriaki Wakaki (Tokai Univ.)
PS-4
Optical Properties of ZnO Thin Films Dispersed with Noble Metal Nanoparticles
Synthesized by Sol-gel Method
Takuji Noguchi, Eisuke Yokoyama, Takehisa Shibuya, Moriaki Wakaki (Tokai Univ.)
PS-5
A Study on High Frequency Ultrasonic Metal Joining by Use of Surface Acoustic Wave
Device
Di Sun (Takushoku Univ.), Kengo Naruse (Seidensha Electronics Co., Ltd), Yuji Watanabe (Takushoku
Univ.)
PS-6
Synthesis of Gallium Oxyhydroxide Nanostructures by Hydrothermal and Electrochemical
Techniques
Norizzawati Mohd Ghazali (MJIIT), Mohamad Rusop Mahmood (Univ. Tek. MARA), Kanji Yasui (Nagaoka
Univ. of Tech.), Abdul Manaf Hashim (MJIIT)
PS-7
Fundamental Study on Controlling Linearization Error in 5-Axis CNC Milling
Tsutomu Sekine (Tokai Univ.), Toshiyuki Obikawa (Univ. Tokyo)
PS-8
Effects of Oxygen Plasma Exposure on the Aromatic Polymer Surface
Shou Seino, Satoru Iwamori (Tokai Univ.)
PS-9
Behavior Change of Water Adsorption by Surface Modification of Fluorocarbon Thin Film
Yuki Ikeda, Takahiro Yukawa, Kei Oya, Satoru Iwamori (Tokai Univ.)
PS-10
Performance Evaluation of 20cc Hydrogen Rotary Engine for Development of New Micro
Power Source
Shogo Yokoyama, Satoshi Ariyama, Kaishu Kawana, Shingo Mizota, Masao Kohzaki (Tokai Univ.)
PS-11
Evaluation of Mechanical Properties and Electrical Conductivity of Carbon Nanotube Yarn
Kento Takeuchi, Tatsuya Morimoto (Tokai Univ.), Toru Iijima, Yasuhiro Inagaki, Yasuhiko Hayashi
(Okayama Univ.), Toru Kuzumaki (Tokai Univ.)
PS-12
Aerodynamic Characteristics Around Square Cylinder with Various Grooves Shapes
Afiq Johari, Hiroo Okanaga (Tokai Univ.)
PS-13
In Situ Measurement of Water Adsorption on Optical Thin Films
Ryou Okuda, Toshiki Harada, Hiroshi Murotani (Tokai Univ.)
PS-14
Influence of the Surface-Roughness of the Substrate on the Surface-Roughness of Optical
Thin Films
Toshinori Harada, Ryo Okuda, Hiroshi Murotani (Tokai Univ.)
PS-15
Characterization of Zinc Oxide Thin Films Prepared by r. f. Sputtering and Laser Ablation
Water
Tatsuru Hatta, Ken Koizumi, Sergei Kulinich, Satoru Iwamori, Shigeru Yamaguchi (Tokai Univ.)
PS-16
Biodegradable Chelant-assisted Decontamination of Metal-laden Bentonite
Ismail M. M. Rahman, Zinnat A. Begum, Hikaru Sawai, Manabu Kobayash, Hiroshi Hasegawa (Kanazawa
Univ.)
PS-17
Metabolism of Polychlorinated Biphenyls in Rhodococcus Jostii RHA1 is Closely Related to
Alkane Metabolism
Yuki Atago (Okayama Univ.), Masao Fukuda (Nagaoka Univ. of Tech.), Junichiro Futami (Okayama Univ.),
Hirofumi Hara (MJIIT)
PS-18
A Photovoltaic System Using Tapped Transformer Suitable for Energy Harvesting
Jun Ishikawa, Akihiro Torii (Aichi Inst. of Tech.), Atsushi Nakata (Shizuoka Inst. of Sci. and Tech.), Kae
Doki (Aichi Inst. of Tech.)
PS-19
Fertigation with Extracts of Vermicomposts of Palm Mill Waste
Parveen Fatemeh Rupani (MJIIT), Asha Embrandiri, Mahamd Hakimi Ibrahim (Univ. Sains Malaysia),
Effie Papargyropoulou (MJIIT)
PS-20
Green Nanofibrous Adsorbent Sheet from Electrospinning of Chitosan/poly (Glycidyl
Methacrylate) Blends for Boron Removal from Solutions
Nadiah Khairul Zaman, Mohamed Mahmoud Nasef (Univ. Teknologi Malaysia)
PS-21
Reduction Time Transesterification of Vegetable Oil into Biodiesel Using Ultrasound
Assisted
Muh Irwan (Poli Teknik Samarinda), Mahyudin Abdul Rachman (MJIIT), Hamdani Saidi (Univ. Tek.
Malaysia), Ramli, Marlinda (Poli Teknik Samarinda)
PS-22
Extraction of Personal Name Aliases Using Wikipedia
Daiki Saito, Yuji Wakebe, Osamu Uchida (Tokai Univ.)
PS-23
An Information Service System at the Time of Large-Scale Disaster Using Twitter
Toshihiro Rokuse, Suguru Nagashima, Osamu Uchida (Tokai Univ.), Fujio Toriumi (Univ. Tokyo)
PS-24
Construction of a Web-Based System to Present the Status of the Earthquake Disaster
Recovery
Yutaro Aoki, Osamu Uchida, Kazumi Terada (Tokai Univ.), Yuki Sato (Sendai Technical High School),
Kiyonari Fukue, Kohei Cho (Tokai Univ.)
PS-25
A Topic Providing System Based on the Personal Preference Estimated from Tweets
Naoto Kondo, Osamu Uchida (Tokai Univ.)
PS-26
Development of the High-Speed Processor for LSI Functional Test
Hokuto Ogihara, Tomokatsu Yoshinari, Yuki Takebayashi, Aizuddin bin Shaali Masri, Satoshi Matsuno,
Takeshi Asakawa (Tokai Univ.)
PS-27
Extraction of Effective Feature for False Rumor Detection by Analysis of Tweets at the Time
of Great East Japan Earthquake
Hikaru Enomoto, Osamu Uchida (Tokai Univ.), Fujio Toriumi (Univ. Tokyo)
PS-28
Automatic Emoji Generation Method from Facial Expression Using Kinect
Thongkam Chaiyapruk, Osamu Uchida (Tokai Univ.)
PS-29
Global Land Cover Classification Using MODIS Surface Reflectance Products
Yuji Yamada, Kiyonari Fukue (Tokai Univ.)
PS-30
Tensile Test and Atomic Microscopic Analysis on Regenerative Tendon Biomaterial
Katsufumi Yamazaki, Ryota Sato, Daiki Morita, Kojun Torigoe, Toru Kuzumaki (Tokai Univ.)
PS-31
Construction of Epstein - Barr Virus Infected Tumor Microenvironment In The Three
Dimensions Culture
Yudai Kawai, Kazuki Okuyama (Tokai Univ.), Haruna Yamamoto (Tokai Univ., Kitasato Univ.), Shinjiro
Umezu, Ai Kotani (Tokai Univ.)
PS-32
Comparison of Carbohydrate Preferences of C-type Lectin SIGNR1 and SIGNR3 as
Phagocytic Receptors
Yoko Kawauchi, Yasuhiro Kuroda, Naoya Kojima (Tokai Univ.)
PS-33
Development of Tubular Bridges with Steel Pipes
Jarwali Turki, Shunichi Nakamura (Tokai Univ.)
PS-34
Influence of a Pre-existing Maar on the Eruptive Activity of the Barombi Mbo Maar,
Cameroon Volcanic Line
Chako Tchamabe Boris, Issa, Takeshi Ohba (Tokai Univ.)
PS-35
Skid Control of Small Electric Vehicle with Hydraulic-Mechanical Hybrid Brake System
Mohamad Heerwan Bin Peeie, Hirohiko Ogino, Yasuo Oshinoya (Tokai Univ.)
PS-36
Improvement of the PD Control for an Electromagnetic GSU
Yasushi Yamamoto, Shinya Hasegawa, Yasuo Oshinoya (Tokai Univ.)
PS-37
Stationary Numerical Calculation of Spark Discharge on Water Surface using Surface
Potential as Boundary Condition
Nur Shahida Midi, Ryu-ichiro Ohyama (Tokai Univ.)
PS-38
Power Restoration Service Considering Switching Factor
Mohd Shahrin Abu Hanifah, Kyoushi Nosu, Hidenori Aoki (Tokai Univ.)
PS-39
Study on a Soil Classification Using Electrical Resistivity in Residential Sites
Yuanhao Gao, Mamoru Fujii (Tokai Univ.)
PS-40
Characteristics of Recombination Plasma with Pulse Plasma Flow
Takaaki Iijima, Suguru Tanaka, Hiroaki Kobayashi, Akira Tonegawa (Tokai Univ.), Kohnosuke Sato
(Chubu Electric Power Co.Inc.), Kazutaka Kawamura (Tokai Univ.)
PS-41
Evaluating Suction Rate of Coastal Dike Backfilling Materials by Large Waves
Masafumi Ioroi, Yoshimichi Yamamoto (Tokai Univ.)
PS-42
Structural Characteristics of Multi-span Cable-stayed Bridges
Yutaka Okamoto, Shunichi Nakamura (Tokai Univ.)
PS-43
Neural Information Processing Models for Consumer Behaviour Analysis
Ryozo Kitajima, Ryotaro Kamimura (Tokai Univ.)
PS-44
Effect of Added Salt on Aggregates and Adsorbed Film of Crown-ether Surfactants
Maki Suzuki, Katsuhiko Fujio (Tokai Univ.)
PS-45
A Study of Trace Gas Detection Based on Cavity Enhanced Absorption Spectroscopy (CEAS)
for Power Transformer Diagnosis
Ryuta Someya (Toshiba Corp., Tokai Univ.), Takeshi Imamura (Toshiba Corp.), Yusuke Imai, Kazuyoku Tei,
Shigeru Yamaguchi (Tokai Univ.)
PS-46
Morphology Control and Characterization of Functional Ceramics by Solution Methods
Soichi Takasugi, Koji Tomita, Michio Iwaoka (Tokai Univ.)
PS-47
Cutting Out Polygons with Lines from Minimum Axis-aligned Rectangle
Pochara Patthamalai, Xuehou Tan (Tokai Univ.)
PS-48
Fiber Tip Heat Source Excited by A Low Power Semiconductor Laser for Clinical
Applications
Masahiko Miyara, Yusuke Imai (Tokai Univ.), Takahiro Fujimoto (Clinic F), Naoki Shinyashiki, Kazuyoku
Tei, Shigeru Yamaguchi (Tokai Univ.)
PS-49
Identification of Formation Mechanism of Faults Through the 3D Shallow Geological
Structure Models Mapped by Ultra-high-resolution Single-channel Sonic Survey
Masatoshi Yagi, Ömer Aydan, Izumi Sakamoto (Tokai Univ.)
PS-50
Study of Airflow Patterns within Real and Simplified Models of Nasal Cavities
Erny Afiza, Yoko Takakura (Tokai Univ.)
PS-51
Research on Four Wheel Independent Steering of an All Wheel Drive In-Wheel Small
Electric Vehicle
Muhammad Izhar Ishak, Hirohiko Ogino, Yasuo Oshinoya (Tokai Univ.)
PS-52
Temperature and Molecular Weight Dependences of Thermal Diffusion for Aqueous
Solutions of Saccharides
Kousaku Maeda, Rio Kita, Naoki Shinyashiki, Shin Yagihara (Tokai Univ.)
PS-53
Study on Haptic Rendering for Virtual Palpation System
Satoshi Suzuki, Kazuhiko Hamamoto (Tokai Univ.)
PS-54
Zero-mass Dirac Hamiltonian of Graphene
Tomohisa Uchida (Tokai Univ.), Kazuhiro Yamada (Matsushige Tekken Industory, Ltd.)
PS-55
Characterisitics of Bi2Sr2CaCu2O8+x THz Oscillator Stack Fabricated by a Dilute Acid
Solutionoscillator Stack Fabricated by a Dilute Acid Solution
Tubasa Nishikata, Takahiro Kato, Yukio Kotaki (Nagaoka Univ. of Tech.), Akira Kawakami (NICT), Kanji
Yasui (Nagaoka Univ. of Tech.)
Thursday, Nov. 7, 2013
Registration Nov. 7, Thursday 9:00 – 13:00 2nd-floor, #17Building
Keynote Speech II
Nov. 7, Thursday 9:30 – 10:10 Nexus Hall
Chair: Dr. Muhamad Kamal Mohammed Amin (MJIIT)
Title: Lesson from a Trial for Cooperation of Medicine and Engineering
Prof. Ai Kotani (Tokai Univ.)
Keynote Speech III Nov. 7, Thursday 10:10 – 10:50 Nexus Hall
Chair: Prof. Dr. Satoru Matsumoto
(MJIIT)
Title: Plasmon-enhanced Vibrational Spectroscopy for the Detection of Dilute Bio-molecules and
Toxic Substances in Water
Dr. Tadaaki Nagao (National Institute for Materials Science)
Special Session Nov. 7, Thursday 11:20 – 13:00 Nexus Hall
Chair: Yoshio Yamamoto (Tokai Univ.)
Theme: Japanese-Style Human Resource Development in ASEAN Countries
SS-1
Look East Policy: Aspects of the Past 30 Years and Future Challenges
SS-2
Outcome Based Education (OBE) – Malaysia’s Journey in Engineering Education
SS-3
Group and Global: One Furukawa Initiatives
SS-4
Japanese Small Company's Way of Engineer Development
Yoshiteru Okamoto (Utsunomiya Univ.)
Megat Johari Megat Mohd Noor (MJIIT)
Takahide Kimura (Furukawa Electric Co., LTD.)
Kenji Fuchiwaki (Hatano Seimitsu Co., LTD.)
Mechanical and Precision Engineering (5)
Chair: Aung Lwin Moe (MJIIT)
Nov. 7, Thursday 11:20 – 12:40 Room A
MP-5-1 Simulation and Optimization Studies of Front and Rear Upright in a Suspension System
Under Static Load Conditions
N. Raihan Radzi, B. A Aminudin (MJIIT), M. Haniff Mat (ARTEC)
MP-5-2 Combustion and Emission Characteristics of FAME Blended Diesel Oil
Mohammad Haris Bin Mokhtar, Yoshihiro Uemura, Akihiko Azetsu (Tokai Univ.)
MP-5-3 Electrostatic Inkjet Phenomena When the Ejection Angle is Tilted
Shigeto Kawata, Masafumi Ogawa, Takumi Hasegawa, Yoshihito Kunugi, Shinjiro Umezu (Tokai Univ.),
Hitoshi Ohmori (Inst. of Physical and Chemical Research)
MP-5-4 Realization of Diamagnetic Levitation of Pencil Leads
Yoshinori Narisawa, Tomohiro Akiyama, Takeshi Mizuno, Masaya Takasaki, Yuji Ishino (Saitama Univ.)
Electronic System Engineering (3)
Chair: Fuminori Kobayashi (MJIIT)
Nov. 7, Thursday 11:20 – 13:00 Room B
ES-3-1
Development of Simplified Fabrication Technique of Metamaterials Using Toner Resist
ES-3-2
Zinc Oxide Grown on Graphene by Thermal Evaporation: Effects of Substrate Temperatures
and Oxygen Flow Rates
Shoichi Sato, Takehisa Shibuya, Moriaki Wakaki (Tokai Univ.)
Nurul Fariha Ahmad (Univ. Tek. Malaysia), Nurul Izni Rusli (Univ. Malaysia Perlis), Mohamad Rusop
Mahmood (Univ. Tek. MARA), Kanji Yasui (Nagaoka Univ. of Tech.), Abdul Manaf Hashim (Univ.Tek.
Malaysia)
ES-3-3
Backside Drill of Si/SiO2 Supporting Structure Using PCB Prototyping Engraver for
Graphene Nanopore Devices Application
Nur Hamizah binti Zainal Ariffin, Abdul Manaf Hashim, Hafizal Yahaya (MJIIT)
ES-3-4
Graphene Formation from Evaporated Palm Oil Using Dual Tube Chemical Vapor
Deposition System
Desrino Jalani (MJIIT), Shaharin Fadzli Abdul Rahman (Univ. Tek. Malaysia), Mohammad Rusop
Mahmood (Univ. Tek. MARA) , Abdul Manaf Hashim (Univ.Tek. Malaysia)
ES-3-5
Modeling of Biomedical Information Sensing System USING SystemC-AMS
Arif Ullah Khan, Yoshinori Takeuchi, Masaharu Imai (Osaka Univ.)
Information Technology and Communications (2) Nov. 7, Thursday 11:20 – 12:40 Room D
Chair: A.K.M. Muzahidul Islam (MJIIT)
IT-2-1
Multi-Factor Authentication Methods for Mobile Cloud Computing
IT-2-2
Fabrication of V-groove for Optical Interconnects from UV-curable Resin by the
Mask-transfer Self-written Method
Mojtaba Alizadeh, Wan Haslina Hassan (MJIIT)
Tadayuki Enomoto, Yukinobu Soeda, Osamu Mikami (Tokai Univ.)
IT-2-3
Construction of Finite State Machine for Myanmar Noun Phrase
IT-2-4
Project-Based Learning Approach Applied to Embedded Software Development
Myintzu Phyo Aung, Khin Thidar Lynn (Univ. of Computer Studies, Mandalay)
Taichi Kajihara, Naohiko Shimizu (Tokai Univ.)
Environmental and Green Technology (2)
Chair: Mikio Miyake (JAIST)
Nov. 7, Thursday 11:20 – 13:00 Room E
EG-2-1 Opportunities and Challenges of Commercial Food Waste Management in Malaysia
Effie Papargyropoulou, Rory Padfield, Parveen Fatemeh Rupani, Zuriati Zakaria (MJIIT)
EG-2-2 Irradiation Treatment Effects on Hydrogen Storage Alloy
Shinnosuke Tokuhira, Shun Ohnuki, Hirohisa Uchida, Yoshihito Matsumura (Tokai Univ.), Hiroshi Abe
(Japan Atomic Energy Agency)
EG-2-3 Solid Waste Management in Malaysia: Status, Challenges and Future Strategies
Zaipul Anwar Zainu, Wan Md Syukri Wan Mohamad Ali, Ahmad Rahman Songip, Nooh Abu Bakar (MJIIT)
EG-2-4 Developing Multiple Linear Regression Model for Dioxin Furan Emission in the
Incineration Process
W. Asma Awatif, B. Sabariah, M. Rashid, M. Normah (Univ. Tek. Malaysia)
EG-2-5 The Effect of Lime on Ammonia Removal from Leachate of a Schedule Waste Landfill
A. Sani, M. Rashid (MJIIT), C.M Hasfalina (Univ. Putra Malaysia)
Mechanical and Precision Engineering (6)
Chair: Matsuya Iwao (Nagaoka Univ. of Tech.)
Nov. 7, Thursday 11:20 – 13:00 Room F
MP-6-1 Experimental Study of Safety Supply Flow Rate on a Small Bore Cylindrical Journal Oil
Film Bearing
Yuta Naruse, Masayuki Ochiai, Hiromu Hashimoto (Tokai Univ.)
MP-6-2 Optimization of Groove Geometry for Improving Angular Stiffness of Thrust Air Bearing
Hayato Sasaki, Yuta Sunami, Masayuki Ochiai, Hiromu Hashimoto (Tokai Univ.)
MP-6-3 Verification of Impact Resistance on Thrust Air Bearing Having Optimized Groove
Geometry
Shouhei Yoshino, Hayato Sasaki, Yuta Sunami, Masayuki Ochiai, Hiromu Hashimoto (Tokai Univ.)
MP-6-4 A Review on Micro-Explosion Phenomena in Water-in-Diesel Emulsion Fuel
Ahmad Muhsin bin Ithnin, Wira Jazair bin Yahya (MJIIT)
MP-6-5 Compensation of Stribeck-type Nonlinearity Using Equivalent-Input-Disturbance Approach
Qi Shi (Tokyo Univ. of Tech.), Liyu Ouyang (Central South Univ.), Jinhua She, Junya Imani, Yasuhiro
Ohyama (Tokyo Univ. of Tech.)
Medical Biotechnology (2)
Nov. 7, Thursday 14:00 – 15:20 Nexus Hall
Chair: Teruo Matsuzawa (JAIST)
MB-2-1 Patterning Collagen Utilizing PELID (Patterning with Electrostatically-injected Droplet)
Method
Ryosuke Araki, Shinjiro Umezu (Tokai Univ.), Hitoshi Ohmori (RIKEN)
MB-2-2 Measurement of Solution Parameters on Sonication Decellularization Treatment
Azran Azhim, Mohammad Shafiq (Univ. Tek. Malaysia), Yuji Morimoto (Physi & Bio- Nano Medi.), Katsuko
Furukawa,Takashi Ushida (Univ. Tokyo)
MB-2-3 Simplification of Signal Processing in Magnetic Resonance Temperature Imaging Based on
Spin-Lattice Relaxation Times of Fat Proton Signals
Shuhei Morita, Kagayaki Kuroda (Tokai Univ.)
MB-2-4 Visualization of Cerebrospinal Fluid Propagation based on Correlation Time Mapping
Satoshi Yatsushiro, Akihiro Hirayama, Mitsunori Matsumae, Hideki Atsumi, Kagayaki Kuroda (Tokai
Univ.)
Mechanical and Precision Engineering (7)
Chair: Kei Oya (Tokai Univ.)
Nov. 7, Thursday 14:00 – 15:40 Room A
MP-7-1 Plasma Acceleration Characteristics of a Rectangular Laser-Electromagnetic Acceleration
Thruster
Yuji Oigawa, Mizuki Karima, Nao Akashi, Hiroshi Hosokawa, Hideyuki Horisawa (Tokai Univ.), Ikkoh
Funaki (ISAS)
MP-7-2 A Pre-Review Study of Ocean Thermal Energy Conversion Cycle with Different Working
Fluids
Norazreen Samsuri, Sheikh Ahmad Zaki Shaikh Salim (MJIIT), Md Nor Musa, Abu Bakar Jaafar (Univ.
Tek. Malaysia), Mohamed Sukri Mat Ali (MJIIT)
MP-7-3 Harvesting Electric Power from Kinetic Energy
Xiaotian Ni, Yoshio Yamamoto (Tokai Univ.)
MP-7-4 Designing a Mixed Mode Magnetorheological Cell
Mohd Jamalullail Mughni, Saiful Amri Mazlan (MJIIT), Hairi Zamzuri (Univ. Tek. Malaysia)
MP-7-5 Auto-Tuning Quadcopter Using Loop Shaping
Ahmad Ataka, Hilton Tnunay, M. Qodar Abdurrohman, Yuliyanto Nugroho, Reka Inovan, Adha Cahyadi
(Gadjah Mada Univ.), Yoshio Yamamoto (Tokai Univ.)
Electronic System Engineering (4)
Chair: Masaharu Imai (Osaka Univ.)
Nov. 7, Thursday 14:00 – 15:40 Room B
ES-4-1
Energy Minimization for Built-In Self-Test in System On-Chip
ES-4-2
Dynamic Reconfiguration of Circuits Using PSoC Analog FPGAs
ES-4-3
Toward a Green Electronic World: A Low Power Design-For-Testability Architecture
ES-4-4
Spectrum Agile Cluster-Based Architecture for Cognitive Radio Ad-hoc Networks
ES-4-5
Run-Time Network-on-Chip Thermal and Power Balancing
Ayub Chin Abdullah, Ooi Chia Yee, Nordinah Bt Isamil, Fuminori Kobayashi (MJIIT)
Fuminori Kobayashi (MJIIT), Shintaro Higuchi (Kyushu Inst. of Tech.), Ooi Chia Yee, Nordinah Binti
Ismail (MJIIT)
Mahshid Mojtabavi Naeini, Chia Yee Ooi (MJIIT)
Nafees Mansoor, A.K.M. Muzahidul Islam, Mahdi Zareei, Sabariah Baharun, Shozo Komaki (Univ. Tek.
Malaysia)
Mohd Shahrizal Rusli (Univ. Tek. Malaysia), Ooi Chia Yee, Fuminori Kobayashi (MJIIT), Nasir Shaikh
Husin, Muhammad Nadzir Marsono (Univ. Tek. Malaysia)
Information Technology and Communications (3) Nov. 7, Thursday 14:00 – 15:20 Room D
Chair: Hiroshi Nakanishi (Osaka Univ.)
IT-3-1
Safety Problems of Smartphone Usage While Driving
Muhammad Idham Adli bin Musa (Tokyo Univ. of Agriculture and Tech.), Kazumoto Morita, Daisuke
Yamaguchi, Michiaki Sekine (National Traffic Safety and Environment Lab.)
IT-3-2
A Compact Thin-Film Monopole Rectangular Patch Antenna for Ultra-Wideband
IT-3-3
Rogue Access Points Detection and Localization Techniques
IT-3-4
Control of Multi-Agent Dynamic Systems Toward Stable Matching
Sutham Satthamsakul (King Mongkut's Inst. of Tech. Ladkrabang)
Mardiana Mohamad Noor, Wan Haslina (MJIIT)
Mohd Syakirin Ramli, Shigeru Yamamoto (Kanazawa Univ.)
Environmental and Green Technology (3)
Chair: Takayoshi Kimura (Kinki Univ.)
Nov. 7, Thursday 14:00 – 15:40 Room E
EG-3-1 Durability Studies of Single Cylinder Diesel Engine Running on Emulsion Fuel
Hasannuddin Bin Abd Kadir, Ahmad Muhsin Bin Ithnin, Aizam Shahroni Bin Arshad, Wira Jazair bin
Yahya (MJIIT)
EG-3-2 Energy Harvesting Using Vibroacoustic Coupling Phenomenon
K. Nishikawa, S. Tanaka, H. Moriyama (Tokai Univ.)
EG-3-3 Research Priorities for the Study of Tropical Peatland: a Stakeholder Engagement Exercise
in Malaysia
Rory Padfield, Khadijah Mohd Syayuti, Zuriati Zakaria, Effie Papargyropoulou (MJIIT)
EG-3-4 Exploring of Induction Condition of Secondary Metabolites Production in Soil Actinomycetes,
Rhodococcus Jostii RHA1
Masanobu Okumura, Li Wen, Hirokazu Ishida (Okayama Univ.), Hirofumi Hara (MJIIT)
EG-3-5 Effect of Mechanical and Chemical Extraction Method on Tensile Properties of Pineapple
Leaf Fiber for Soil Cover Application
Sarah S (MJIIT), Rahman W. A. W. A (Univ. Tek. Malaysia), Noor Azian M (MJIIT), Nadia A (Univ. Tek.
Malaysia)
Mechanical and Precision Engineering (8)
Chair: Yoshihito Matsumura (Tokai Univ.)
Nov. 7, Thursday 14:00 – 15:20 Room F
MP-8-1 Experimental Study of Effect of Web Thickness Variation on Internal Stress in Wound Roll
Hikaru Sugiishi, Hiromu Hashimoto (Tokai Univ.)
MP-8-2 Internal Stress Analysis of Wound Roll Considering Web Thickness Variation and
Experimental Verification
Kazuhisa Yoda, Hiromu Hashimoto (Tokai Univ.)
MP-8-3 Measurement of Static Friction Force between Plastic Film and Steel Roller
Yasushi Fujiwara, Yuta Sunami, Hiromu Hashimoto (Tokai Univ.)
MP-8-4 Implementation of a Secured Dynamic Wireless Sensor Network in OMNeT++ Modular
Lalitha Bhavani Jivanadham, A.K.M. Muzahidul Islam (MJIIT), Yoshiaki Katayama (Nagoya Inst. of
Tech.), Sabariah Baharun, Shozo Komaki (MJIIT)
Mechanical and Precision Engineering (9)
Chair: Wira Jazair bin Yahya (MJIIT)
Nov. 7, Thursday 16:00 – 17:40 Room A
MP-9-1 Magnetostrictive Characterization of Supersaturated Fe-Al Alloy
Mao Amano, Maki Hashimoto, Yoshiaki Shinohara, Yoshihito Matsumura (Tokai Univ.)
MP-9-2 Seismic Vibration Control of a Multi-Story Building Considering Damage Risk of
Accommodated Computer Servers
Takanori Ito, Masayuki Kohiyama (Keio Univ.)
MP-9-3 Pipe Friction Loss Reduction by Microbubbles -The Relationship between Pipe Friction Loss
and Shearing Force-
Satoshi Sekine, Hiroo Okanaga (Tokai Univ.)
MP-9-4 A FEM Modal Analysis Study of Exhaust System Using MSC. PATRAN and NASTRAN
M.S.Noorazizi, B. A. Aminudin (MJIIT)
MP-9-5 Derivation of Optimal Values in Cushion and Back Angles for Lower Limb Blood Flow
Saori Sone (Tokai Univ.), Daisuke Sannan (Keio Univ.), Takeo Kato (Tokai Univ.), Yoshiyuki Matsuoka
(Keio Univ.), Hiromu Hashimoto (Tokai Univ.)
Electronic System Engineering (5)
Nov. 7, Thursday 16:00 – 17:40 Room B
Chair: Kanji Yasui (Nagaoka Univ. of Tech.)
ES-5-1
Fast Processing Tongue Image Segmentation Algorithm
ES-5-2
Real-time Web-based Sensor Monitoring and Forecasting System in a Building
ES-5-3
A Body Implement Able Early Heart Attack Detection System
ES-5-4
Wireless Capsule Endoscopy Image Enhancement Using Anisotropic Contrast Diffusion
ES-5-5
Investigation of Gold-Graphene Surface in Surface Plasmon Resonance Biosensor
Nur Diyana Kamarudin, Ooi Chia Yee, Nordinah Ismail, Fuminori Kobayashi (MJIIT)
Mohd Anuar Abu Bakar, Shahrum Shah Abdullah (MJIIT)
Ishtiak Al Mamoon, Ahmad Shahrizal Sani, A.K.M Muzahidul Islam, Ooi Chia Yee, Fuminori Kobayashi,
Sabariah Baharun, Shozo Komaki (MJIIT)
Rosdiana Shahril, Sabariah Baharun, A.K.M. Muzahidul Islam (Univ. Tek. Malaysia)
Hamid Toloue, Anthony Ceteno (MJIIT)
Management of Technology (2)
Nov. 7, Thursday 16:00 – 17:40 Room C
Chair: Mas Bambang Baroto (Univ. Tek. Malaysia)
MT-2-1 Prioritization of Balanced Scorecard Aspects Using Analytical Hierarchy Process: A Case
Study of Industrial Organization
Neda Jalaliyoon, Nooh Abu Bakar (MJIIT), Hamed Taherdoos (Univ. Tek. Malaysia)
MT-2-2 Leadership for Innovation: A One Size Does Not Fit All
Al-Junaidi Mohamad, Akbariah Mahdzir (MJIIT)
MT-2-3 The Attribute Dimensions on Product Quality, the Effect on Thai Consumer Buying
Decision
Pajaree Ackaradejruangsri (Ritsumeikan Asia Pacific Univ.)
MT-2-4 The Effect of Lean Manufacturing to Competitive Capability in Product Module Assembly
Process
Mohd Yusri Bin Mohd Yusof (MJIIT)
MT-2-5 Talent Definition and Talent Review in Talent Management
Zumalia Norzailan (MJIIT)
Information Technology and Communications (4) Nov. 7, Thursday 16:00 – 17:20 Room D
Chair: Toshio Wakabayashi (MJIIT)
IT-4-1
A Conceptualization of Intelligent Lab Tutor (ILT) for Virtual Laboratory
IT-4-2
Procedure Guided Crawling and Knowledge Analysing of Syllabuses of Universities
IT-4-3
Extraction of Linguistic Patterns for Feature Identification in Customer Reviews
IT-4-4
Mobile Cloud Computing in Healthcare
Norzaidah Md Noh (Univ. Tek. MARA), Rubiyah Yusof (Univ. Tek. Malaysia)
Hiroshi Nakanishi (Osaka Univ.), Tetsuo Oka (Tresbind Corp.), Yoshiaki Kanaya (Osaka Univ.)
Su Su Htay, Khin Thidar Lynn (Univ. of Computer Studies, Mandalay)
Cik Ku Haroswati Che Ku Yahaya, Wan Haslina Hassan (MJIIT)
Environmental and Green Technology (4)
Chair: Hirofumi Hara (MJIIT)
Nov. 7, Thursday 16:00 – 17:20 Room E
EG-4-1 Preliminary Survey of Household Energy-use Behaviour in Malaysia
Hirda Lailani Khalid, Sheikh Ahmad Zaki Shaikh Salim (MJIIT) , Aya Hagishima (Kyushu Univ.)
EG-4-2 Formulation of a New Pre-Coating Material for Fabric Filtration in Air Filtration System
Siti Hajar Binti Abd Rahim, M. Rashid, Nurnadia Binti Andenan (MJIIT), Ammar M. Rashid (AMR
Environmental Sdn Bhd)
EG-4-3 Comparative Fractional Efficiency Prediction of MR-deDuster
H. Norelyza, M. Rashid (MJIIT)
EG-4-4 Effect of Applying Negative DC Cathode Bias in RF Magnetron Sputtering
Kohei Osuga, Toshinori Yamada, Haruo Shindo, Masao Isomura (Tokai Univ.)
Mechanical and Precision Engineering (10)
Chair: Masao Kohzaki (Tokai Univ.)
Nov. 7, Thursday 16:00 – 17:40 Room F
MP-10-1 Effects of Environmental Gas and Lubricant on Structural Change in Steel Under Rolling
Contact
Hiroyoshi Tanaka, Kakeru Enami, Masaaki Hashimoto, Joichi Sugimura (Kyusyu Univ.)
MP-10-2 Tribological Behaviours of Austenitic Stainless Steel and OFHC Cu in the Earliest Stage of
Sliding
Zaid Ali Subhi (Univ. Tek. Malaysia), Kanao Fukuda (MJIIT), Takehiro Morita, Joichi Sugimura (Kyusyu
Univ.)
MP-10-3 High-repetition Rate Operation of a Laser-assisted Pulsed Plasma Thruster
Mizuki Karima, Hideyuki Horisawa (Tokai Univ.)
MP-10-4 Fabrication and Evaluation of Mechanical Properties of C/C-HfC-SiC Composites
Yuki Yano, Kazuya Wada (Tokai Univ.), Takuya Aoki, Toshio Ogasawara (JAXA), Shinjiro Umezu (Tokai
Univ.), Hitoshi Omori (RIKEN)
MP-10-5 Characterization and Improvement of a Laser-Assisted Pulsed Plasma Thruster
Hiroshi Hosokawa, Osamu Yamada, Haruki Koyabayashi, Hideyuki Horisawa (Tokai Univ.)