HT SINGLE AXLE CONVERTER DOLLY

HT SINGLE AXLE CONVERTER DOLLY
•Standard “A” frame design
•Spring Air Ride Suspension available
•Triples-rated
•Lightweight yet sturdy
•Custom built to fit your fleet
HT Dolly
Wire Loom protects air and electrical lines
HT Dolly WBS
(Wide Base Single)
Available in two piece body construction
Long-lasting HT Dollies are
available in a wide variety of
choices for your unique business needs.
Hot Dipped Galvanized body option available
HT TANDEM AXLE CONVERTER DOLLY
•Hinged drawbar type with swivel eye standard
•Corrosion resistant features
•Heavy duty for heavy hauls
•Custom built to fit your fleet
•Optional HOT DIPPED GALVANIZING is available
HT Dolly (Tandem )
42˝ FRAME WIDTH
118.75˝
47 1/2˝ 5TH WHEEL HT
295/75R22.5
15˚
30˚
14 1/4˝
34˝ DRAWBAR HT
78˝ DRAWBAR LENGTH
77.5˝ TRACK
79˝
102.38˝ OVERALL WIDTH
STANDARD FEATURES
• Standard “A” frame design
• Optional Hot Dipped Galvanizing available
• Lightweight yet sturdy
• Triples rated • Built where your trailer are built
• Custom built to your fleet
• Spring air ride suspension available
SPECIFICATIONS
General
Drawbar Length
Drawbar Height
Width
Fifth Wheel Height Tare Weight
Axle
Springs
Brake System
Oil Seal System
Wheel
Tires
78˝ center of eye to center of fifth wheel
34˝-35˝
102.36˝ (across tires)
47.5˝ (Nominal)
3,050 lbs
Electrical
Body Construction
Rails
Drawbar
Safety Chain
Safety Hooks
Fifth Wheel
Support Gear
Lights & Wiring
.25˝ thick and 6˝ deep channel.
Fixed tapered ‘A’ frame type with 2-3/8˝ I.D. drawbar eye.
.75˝ grase 8 alloy steel chain, triple rated.
Grage 8 alloy steel with safety latch, triple rated.
Jost JSK37010-PM9X with roadside release handle.
Steel stiffleg with fixed shoe.
Color coded 12-volt sealed system with internal ground, and watertight
molded connectors to accept sealed lamps.
Paint & Finish
Paint
Miscellaneous
Warranty
Suspension
Suspension
5˝ round, 22,500 Lb rating, 77-1/2˝ track, 16-1/2˝×7˝ with non-asbestos lining.
3-leaf H-356 low arch.
2S-1M brake system.
Stemco guardian with platinum performance system.
22.5×8.25 steel disc.
Low profile 22.5 radial tires.
All steel parts are shot blasted, coated with zinc rich primer.
Two swing away lifting handles, one each side of drawbar. Meets counter
balanced per TMC RP-721
Limited five year warranty.
Single axle Hutch H-9700.
A3982
All dimensions are nominal.
Consult factory for special options available.
Specifications subject to change without notice.
HYUNDAIHyundai
TRANSLEAD
ISO 9002
A3982
ISO 9001:2000
A subsidiary of Hyundai Motors
800-251-0871 ∙ Fax 619-209-3224 www.translead.com