Diamond Coring and Sawing Chapter 3471.9kB

Transcription

Diamond Coring and Sawing
Diamond drilling tools
Diamond coring tool DD 110-W
Page 96
Diamond coring tool DD 160
Page 97
Diamond coring tool DD 150-U
Hydraulic coring tool DD 750-HY
Diamond drilling consumables
Page 96
Page 97
Page 98
Page 98
Page 99
Diamond core bit DD-C T2
Page 100
Diamond core bit (metric) DD-B HDMU
Page 100
Diamond core bit DD-B HWC
Starting aid DD-SA
Connection end DD
Page 100
Page 101
Page 102
Diamond core bit DD-B UCL
Page 102
Change module for diamond core bit DD-CM UCL
Page 103
Diamond sawing tools
Wall saw DS TS20-E
Page 104
Saw head DS TS 22
Page 105
Hydraulic power unit D-LP 15
Wall saw DS TS 32 / D-LP 32
Saw head DS TS 32
Wire saw DS WS 10-E
Wire saw DS WS 15
Wire saw DS WSS30
Diamond sawing consumables
Page 104
Page 105
Page 106
Page 106
Page 107
Page 107
Floor saw blade DS-BF C1/LP
Page 108
Wall saw blade DS-BT HI C-10E
Page 108-109
Floor saw blade DS-BF A1/LP
Floor saw blade DS-BF CG1/LP
Wall saw blade DS-BT HI/HY C-20E
Wall saw blade DS-BT HI/HY C-M
Wall saw blade DS-BT HI/HY C-H
Wall saw blade DS-BT HI CM-H
Wall saw blade DS-BT CM-H/CP+
Diamond wire DS-W 10.5 CM+
Diamond wire DS-W Steel 20%
4
Page 101
Page 108
Page 109
Page 109
Page 110
Page 110
Page 110 111
Page 111
Page 111
Page 111
Diamond
Cordless Systems
Systems
Hilti. Outperform. Outlast.
Hilti. Outperform. Outlast.
92
Diamond Coring and Sawing Contents Page
www.hilti.co.za | 08000 23331
93
Trade
recommendation
Building construction
Mechanical
Steel & Metal
Electrical
Mechanical
Electrical
Mechanical
DSC
DSC
DSC
Mechanical
Mechanical
Mechanical
Electrical
Electrical
Electrical
Mechanical
Mechanical
Electrical
Electrical
Applications
Trade
recommendation
Applications
4
• A
nchoring in
concrete
• Drilling precise
anchor and through
holes in diameters
from 8 to 35 mm
• Low-noise solution
for setting anchors
Tools
Advantages
DD EC-1
• Anchoring and
coring in concrete
and masonry
• Hand-guided wet coring
in reinforced concrete
• Dry coring in aerated
concrete, sand-lime block,
perforated brick, solid
brick and clinker
DD 110-W
• High drilling speed
due to top spine
technology
• Wide range of barrels
for m&e applications
for any base material
• Anchoring, coring
and through holes
in concrete
• Installing pipes for
sanitary, heating and air
conditioning
• Installing water supply and
waste water pipes
DD 120
• Compact unit for
small spaces
• Rig-based wet drilling
in concrete
• Hand-guided wet
drilling for setting
large-diameter
anchors and
reinforcing bars
DD 150-U
• Versatile due to Hand
held and rig based
operations
Tools
Advantages
Number of gears
1
2
2
3
Weight of tool as per EPTA 1/2003 (kg) *
Drilling Range
HH: 8-35 mm, RB: 8-35 mm
HH: 16-162 mm, RB: 25-132 mm
RB: 16-162mm
HH: 37-162 mm, RB: 12-162 mm
Drilling Range
Weight
8kg
11kg
11kg
22kg
Use
Hand Held
Rig Based
Hand Held & Rig based
Hand Held
* As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008.
** Hilti values following preliminary EPTA Standard 05-2009.
94
• Making penetrations
for ducts, pipes and
cables
• Making penetrations
for ducts, pipes and
cables
• The power control
LED helps new
users to achieve
the optimum rate of
drilling progress
• The power control
LED helps new
users to achieve
the optimum rate of
drilling progress
DD 160
DD 200
• Large diameter range
making this suited for
most BC contractors
3
• Air cooled motor.
• Proven reliability
with same stand as
DD350
• Through-holes and
penetrations
• Blind holes for
setting anchors or
post-installed reba
DD 350
• Strongest tool on the
market from normal
plug socket. - Single
phase power.
• Sealed water cooled
motor enables upside
down coring without
extraction
• Operation within
the optimum power
range is easy with
the aid of the LED
power controls for
peak performance
and longer core
bit life
DD 500
• 3 phase power
• Sealed water cooled
unit enables upside
down coring without
water extraction.
3
10
10
RB: 25-202mm
RB: 25-400mm
RB: 52-500 mm
RB: 82-600 mm
Weight
16kg
34kg
35kg
38kg
Use
Rig Based
Rig Based
Rig Based
Rig Based
* As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008.
** Hilti values following preliminary EPTA Standard 05-2009.
95
Diamond coring tool DD 110-W
Key applications & advantages
■
■
■
■
■
Hand-guided wet coring in reinforced
concrete
Dry coring in aerated concrete, sandlime block, perforated brick, solid brick
and clinker
Drilling out socket recesses for the
installation of electrical fittings
High motor performance and sturdy
2-speed gearing for optimum drilling
speed
Compact design and low weight for
easy handling
Technical data
Number of gears
2
Rotation speed
gear 1 under no
load
Drilling range - wet
hand held - max.
hand held - min.
Drilling range
650 rpm
Drilling range - dry
- max.
- min.
Chuck type
A-weighted emission sound power
level1)
A-weighted emission sound pressure level1)
1)
■
132 mm
■
25 mm
1x Diamond coring tool DD 110-W 230V, 1x Diamond core bit DD-BI 66/350 HWC, 1x Flat wrench 27 (2)
set, 1x Chuck BI+ assy, 1x Case
■
■
■
■
■
Rig-based wet drilling in concrete for
pipe penetrations, cable trays and
ducts and for the installation of railings
and barriers
Hand-guided wet drilling for setting
large-diameter anchors and reinforcing
bars
Hand-guided dry drilling in masonry for
pipe penetrations in plumbing, heating
and air conditioning installations and for
chimney and stove installation
Wet and dry drilling with one tool in
different base materials without need to
change rig components
High motor performance and sturdy
three-speed gearing for optimum drilling speed
Ordering designation
Package contents
DD 150-U 230V
1x Diamond coring tool DD 150-U 230V, 1x Chuck BI+ assy, 1x Case
96
■
162 mm
16 mm
BI+
95 dB (A)
Technical data
Drill stand
Number of gears
84 dB (A)
1 pc
Item number
249137
Package contents
DD 160 230V
1x Diamond coring tool DD 160 230V, 1x Chuck BI+ assy
3
420 rpm
Weight of complete
system
Chuck type
16 kg
1)
Sales pack
quantity
Base plate dimensions
and system weight
based on use of SFL
stand
Rotation speed
gear 1 under no
load
w/ stand - max.
w/ stand - min.
Drilling range
level1)
202 mm
25 mm
Rig-based wet: 25-202
mm
BI+
106 dB (A)
93 dB (A)
according to EN 60745
Sales pack
quantity
1 pc
Item number
2005205
Diamond coring tool DD 150-U
■
hand-held dry: 16-162
mm, hand-held wet:
25-132 mm
Rig-based wet drilling in concrete for
pipe penetrations in plumbing, heating
and air conditioning installations
Stitch drilling for cable trays and ventillation ducts
Drilling blind holes for large-diameter
anchors, reinforcing bars and the installation of railings and barriers
Exceptionally user-friendly thanks to
self-explanatory features and controls
Sturdy three-speed gearing for outstanding coring performance across the
entire diameter range
Ordering designation Package contents
DD 110-W 230V
■
Technical data
Number of gears
3
Rotation speed
gear 1 under no
load
w/ stand - max.
w/ stand - min.
hand held - max.
hand held - min.
Drilling range
780 rpm
- max.
- min.
Weight of complete
system
162 mm
■
■
■
162 mm
12 mm
■
131 mm
Making penetrations for ducts, pipes
and cables
Openings for ventilation
Stitch drilling for breaches
The power control LED helps new users
to achieve the optimum rate of drilling
progress and maximum core bit life
Easy to handle, easy to understand and
easy to operate
8 mm
hand-held dry: 37-162
mm, hand-held wet:
8-131 mm, Rig-based
wet: 12-162 mm
Technical data
Number of gears
3
Rotation speed
gear 1 under no
load
w/ stand - max.
w/ stand - min.
Drilling range
265 rpm
Weight of complete
system
Chuck type
34 kg
level1)
Angular coring
37 mm
22 kg
Sales pack
quantity
1 pc
■
1)
Item number
433323
Package contents
DD 200 BL 230V
1x Diamond coring tool DD 200 230V EU assy, 1x Chuck DD-C-BL assy
400 mm
25 mm
mm
BL
105 dB (A)
92 dB (A)
Yes
Sales pack
quantity
1 pc
Item number
283497
97
4
Hydraulic coring tool DD 750-HY
■
■
■
■
■
Through-holes and penetrations
Blind holes for setting anchors or postinstalled rebar
Corner holes for sawing
Operation within the optimum power
range is easy with the aid of the LED
power controls for peak performance
and longer core bit life
High performance, low weight
Technical data
Number of gears
10
Rotation speed
gear 1 under no
load
Rotation speed
gear 10 under no
load
w/ stand - max.
w/ stand - min.
Drilling range
667 rpm
Weight of complete
system
Chuck type
35 kg
level1)
1)
Package contents
DD 350 BL 230V
1x Diamond coring tool DD 350 230V assy, 1x Chuck DD-C-BL assy
■
■
■
■
■
298 rpm
500 mm
52 mm
mm
BL
108 dB (A)
95 dB (A)
Package contents
DD 750-HY 20
1x Drive DD-750HY 20CCM
Large penetrations
Deep-hole drilling
Rapid repetitive drilling
Modular
Lets you build the system that suits
your needs best
Technical data
Number of gears
4
w/ stand - max.
w/ stand - min.
Drilling range
750 mm
Base materials
Concrete
52 mm
mm
Column extension
Yes (optional)
Dimensions
(LxWxH)
Fine feed
355 x 215 x 520 mm
Jack screw
Yes (optional)
Max. core bit
capacity
750 mm
Yes (optional)
Sales pack
quantity
DD 750-HY BA3-70 1x Drive DD-750HY 20CCM, 1x Hose WH11, 1x Jack screw DD-CS M16, 1x Chuck DD-C-BU, 1x Chuck
DD-C-BS, 1x Coupler assy, 1x Coupler assy, 1x Quick-locking nut DD-CN-SML
1 pc
1 pc
4
Item number
258437
373979
Sales pack
quantity
1 pc
Item number
211539
■
■
■
■
■
Coring through-holes and penetrations
Drilling blind holes for setting anchors
or post-installed rebar
Corner holes for sawing
Operation within the optimum power
range is easy with the aid of the LED
power controls for peak performance
and longer core bit life
High performance, low weight
Technical data
Number of gears
10
Rotation speed
gear 1 under no
load
Rotation speed
gear 10 under no
load
w/ stand - max.
w/ stand - min.
Drilling range
531 rpm
Weight of complete
system
Chuck type
38 kg
level1)
1)
Package contents
DD 500 BS 400V
1x Diamond coring tool DD 500 400V assy, 1.001x Hex skt hd cap screw M12X55, 1x Chuck BL-BS
600 mm
82 mm
mm
BS
115 dB (A)
100 dB (A)
98
265 rpm
Sales pack
quantity
1 pc
Item number
285909
99
Starting aid DD-SA
■
■
■
■
Drilling accurate 8-35 mm diameter anchor and through holes
Various types of steel-reinforced concrete, marble, sand-lime
block and brick
Easy core removal through the rear end of the core bit
Laser-welded segments
■
■
■
Ordering designation Nominal diameter Working length Change module Base materials
DD-C 10/150 T2
10 mm
150 mm
No
DD-C 12/150 T2
12 mm
150 mm
No
Connection end
Laser-welded segments Segment height
Concrete, soft to DD-C connection Yes
medium
11 mm
Concrete, soft to DD-C connection Yes
medium
11 mm
Hand-held dry coring in masonry
Compatible with Hilti PCM and HDM core bits and socket cutter
For easy hole-starting in masonry
Item number
336887
Nominal diameter
Working length
Connection end
336889
Starting aid DD-SA 102/320
102 mm
320 mm
n/a
Sales pack
quantity
1 pc
Item number
211495
Connection end DD
4
■
■
■
■
Drilling accurate 8-35 mm diameter anchor and through holes
Various types of steel-reinforced concrete, marble, sand-lime
block and brick
Easy core removal through the rear end of the core bit
Ordering designation Nominal diameter Working length Change module Base materials
Connection end
DD-C 14/150 T4
14 mm
150 mm
No
Concrete, abrasive
DD-C connection Yes
11 mm
336855
DD-C 18/300 T4
18 mm
300 mm
No
Concrete, abrasive
DD-C connection Yes
11 mm
336864
DD-C 16/300 T4
DD-C 18/600 T4
DD-C 20/300 T4
DD-C 22/300 T4
DD-C 24/300 T4
DD-C 25/300 T4
DD-C 25/600 T4
DD-C 28/300 T4
DD-C 30/300 T4
DD-C 30/600 T4
DD-C 32/300 T4
DD-C 35/300 T4
16 mm
18 mm
20 mm
22 mm
24 mm
25 mm
25 mm
28 mm
30 mm
30 mm
32 mm
35 mm
300 mm
No
600 mm
Concrete, abrasive
No
300 mm
Concrete, abrasive
No
300 mm
Concrete, abrasive
No
300 mm
Concrete, abrasive
No
300 mm
Concrete, abrasive
No
600 mm
Concrete, abrasive
No
300 mm
Concrete, abrasive
No
300 mm
Concrete, abrasive
No
600 mm
Concrete, abrasive
No
300 mm
Concrete, abrasive
No
300 mm
Concrete, abrasive
No
Concrete, abrasive
Laser-welded
segments
DD-C connection Yes
Segment height
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
DD-C connection Yes
11 mm
Item number
336862
301192
336870
336873
336875
Connection end
BI-1
BI+
1 pc
236120
BR-1
BR
1 pc
236121
DD-BL
DD-BS
BU-1
BL
BS – 1 ¼“
BU
Sales pack
quantity
1 pc
12 pc
1 pc
Item number
305542
286794
236122
336876
301199
336878
336880
301203
336881
336884
Diamond core bit (metric) DD-B HDMU
■
■
■
Hand-held dry diamond coring in masonry
One specification suitable for all kinds of masonry materials
Ordering
designation
Nominal diameter Working length Change module Number of
segments
Base materials
37 mm
320 mm
No
3
DD-B 52/320+
HDMU
52 mm
320 mm
Yes
3
67 mm
320 mm
Yes
4
DD-B 87/320+
HDMU
87 mm
320 mm
Yes
4
DD-B 102/320+ 102 mm
HDMU
320 mm
Yes
5
320 mm
Yes
5
DD-B 122/320+ 122 mm
HDMU
320 mm
Yes
5
DD-B 37/320+
HDMU
DD-B 67/320+
HDMU
DD-B 112/320+ 112 mm
HDMU
100
Connection end Laser-welded
segments
Item number
M24
Yes
39485
All types of masonry (hollow
brick, sand-lime block, etc.)
M41
Yes
39487
M41
Yes
39488
M41
Yes
39489
M41
Yes
39490
M41
Yes
39491
M41
Yes
39492
101
Change module for diamond core bit DD-CM UCL
■
■
Coring in reinforced concrete in the 35-300 mm diameter range
Superior lifetime thanks to 12 mm diamond segment height
DD-B 35/430 UCL
DD-B 37/430 UCL
DD-B 42/430 UCL
DD-B 47/430 UCL
Change
module
Number of
segments
Base materials
No
4
Concrete, Concrete (reinforced)
No
No
No
DD-B 225/430 UCL No
DD-B 250/430 UCL No
DD-B 300/430 UCL No
4
4
4
17
17
18
■
■
Connection
end
Segment
dimensions
Segment
height
Segment
length
Sales pack
quantity
M41, M41
20 x 3 x 12 mm
12 mm
20 mm
1 pc
M41, M41
M41, M41
M41, M41
M41, M41
M41, M41
M41, M41
20 x 3 x 12 mm
20 x 3 x 12 mm
20 x 3 x 12 mm
12 mm
12 mm
12 mm
24 x 4.5 x 12 mm 12 mm
24 x 4.5 x 12 mm 12 mm
24 x 5 x 12 mm
12 mm
20 mm
20 mm
20 mm
24 mm
24 mm
24 mm
Item
number
1 pc
2078086
1 pc
2078088
1 pc
1 pc
1 pc
1 pc
2078087
2078089
2078090
2078091
2078092
DD-CM 82 UCL
Working length Change module Number of segments Base materials
DD-B 52/430+ UCL
430 mm
DD-B 62/430+ UCL
DD-B 72/430+UCL
430 mm
430 mm
Yes
Yes
5
6
DD-B 77/430+ UCL
430 mm
Yes
6
DD-B 82/430+ UCL
430 mm
Yes
8
DD-B 92/430+ UCL
430 mm
Yes
8
DD-B 102/430+
UCL
430 mm
Yes
8
430 mm
Yes
9
430 mm
Yes
9
430 mm
Yes
10
430 mm
Yes
10
430 mm
Yes
11
430 mm
Yes
12
430 mm
Yes
12
430 mm
Yes
13
430 mm
Yes
16
DD-B 107/430+
UCL
DD-B 112/430+
UCL
DD-B 122/430+
UCL
DD-B 127/430+
UCL
DD-B 132/430+
UCL
DD-B 152/430+
UCL
DD-B 162/430+
UCL
DD-B 172/430+
UCL
DD-B 202/430+
UCL
102
DD-CM 92 UCL
Coring in the 52-202 mm diameter range in reinforced concrete
5
DD-CM 52 UCL
DD-CM 62 UCL
DD-CM 77 UCL
Yes
Ordering designation Change
module
DD-CM 72 UCL
■
■
Coring in reinforced concrete
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
Concrete, Concrete
(reinforced)
DD-CM 102 UCL
DD-CM 107 UCL
Connection
end
M41
M41
M41
Laser-welded
segments
No
No
No
Length
Sales pack
quantity
430 mm 1 pc
430 mm 1 pc
430 mm 1 pc
Item
number
2077744
2077745
2077746
M41
No
430 mm 1 pc
2077747
M41
No
430 mm 1 pc
2077748
M41
No
430 mm 1 pc
2077749
M41
No
430 mm 1 pc
2078060
M41
No
430 mm 1 pc
2078061
M41
No
430 mm 1 pc
2078062
M41
No
430 mm 1 pc
2078063
M41
No
430 mm 1 pc
2078064
M41
No
430 mm 1 pc
2078065
M41
No
430 mm 1 pc
2078066
M41
No
430 mm 1 pc
2078067
M41
No
430 mm 1 pc
2078068
M41
No
430 mm 1 pc
2078069
DD-CM 112 UCL
DD-CM 122 UCL
DD-CM 127 UCL
DD-CM 132 UCL
DD-CM 152 UCL
DD-CM 162 UCL
DD-CM 172 UCL
DD-CM 202 UCL
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Number of
segments
5
5
6
6
8
8
8
9
9
10
10
11
12
12
13
16
Base materials
Connection
end
Concrete, Concrete (reinforced) n/a
Laser-welded
segments
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Segment dimensions Segment
height
21 x 3.2 x 12 mm
24 x 3.5 x 12 mm
24 x 3.5 x 12 mm
24 x 3.5 x 12 mm
24 x 3.5 x 12 mm
24 x 3.5 x 12 mm
24 x 3.5 x 12 mm
24 x 3.5 x 12 mm
24 x 3.5 x 12 mm
24 x 3.5 x 12 mm
24 x 3.8 x 12 mm
24 x 3.8 x 12 mm
24 x 3.8 x 12 mm
24 x 3.8 x 12 mm
24 x 4 x 12 mm
24 x 4 x 12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
Sales pack
quantity
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
Item
number
2077769
2078100
2078101
2078102
2078103
2078104
2078105
2078106
2078107
2078108
2078109
2078110
2078111
2078112
2078113
2078114
103
4
Wall saw DS TS20-E
Saw head DS TS 22
■
■
■
■
■
Cutting and extending openings for
doors, windows and walls
Controlled demolition in renovation
Corrective work on facades, partition
walls, etc.
Best-in-class cutting performance at
depths of up to 73 cm / 28” thanks to
efficient electric drive, traction control
and smooth, stepless speed control
User-friendly remote control with clear,
easily-read display and fault diagnosis
system
Dimensions
(LxWxH) - electric
power unit
Height remote
control
Height saw head
100.3 dB (A)
IP protection class
IP 65 (EN 60529)
Length remote
control
Length sawing
head
Max. cooling water
pressure
Max. fuse rating
390 mm
Min. cooling water
supply rate
4 l/min
1)
Technical data
730 x 350 x 590 mm
DS TS20-E 1.6 3x400V 1x Sawing head DS TS20-E 1.6, 1x Hose 10M assy, 50x Flush anchor HKD-D M12x50 assy, 1x Electro
box DS EB-TS20-E assy, 1x Remote control DS RC-TS20, 1x Trolley Saege assy, 1x Power cable DS
TS20-E 10m assy, 1x Tool set DS TS
320 mm
375 mm
6 bar
16 A, 25 A, 32 A
Sales pack
quantity
Item number
2064901
1 pc
Package contents
DS TS22
1x Sawing head DS TS22
■
■
■
■
■
■
Wall sawing with the DS TS22 saw head
Wire sawing with the DS WS10
Hydraulic drilling with the DD 750 HY
Hydraulic remote control
Very robust and durable system
Dimensions (LxWxH) - hydraulic
power unit
Height hydraulic
power unit
IP protection class
522 x 490 x 1101 mm
Length hydraulic
power unit
Max. cooling water
pressure
Max. fuse rating
522 mm
Max. operating
pressure
Min. cooling water
supply rate
Min. generator
power
Min. storage
temperature
190 bar
1 pc
■
■
1101 mm
IP 54 (IEC 529)
6 bar
32 A
5 l/min
30 kVA
Drive unit
Engine
displacement
Height saw head
Item number
39189
D-LP15/D-LP32 hydraulic power unit
30 cm³
337 mm
Length sawing
head
Max. cooling water
pressure
Max. operating
pressure
Min. cooling water
supply rate
Min. storage
temperature
Number of gears
328 mm
Oil flow rate - max
45 l/min
6 bar
180 bar
1 l/min
4
-15 °C
2
Sales pack
quantity
1 pc
Cutouts and breaches for doors, windows, ducts and shafts
Controlled demolition and renovation
Wall sawing, wire sawing and largediameter hydraulic coring
Rugged and durable saw system based
on well-proven technology
Tested and certified for maximum safety
Technical data
Dimensions (LxWxH) - hydraulic
power unit
Engine
displacement
Height hydraulic
power unit
Height remote
control
Height saw head
90 dB (A)
IP protection class
IP 44
Length hydraulic
power unit
Length remote
control
Length sawing
head
790 mm
1)
-15 °C
Sales pack
quantity
LP 15 400V
104
■
■
Technical data
Technical data
Item number
310218
Wall saw DS TS 32 / D-LP 32
Hydraulic power unit D-LP 15
Wall sawing with D-LP 15
Auto-pivoting blade guard holder
125 mm
Package contents
■
■
■
DS TS32 LP32 3x400V 1x Sawing head TS32 54, 2x Hose DS-PH34-10, 1x Hose DD-FH4/14-10 set, 4x Rail support DS-RF-L,
1x Hydraulic power unit LP 32 400V, 1x Remote control D RC-LP32, 1x Side section DS-BG 80, 1x
Center section DS-BG 80, 1x Tool set DS-LP32/TS32
54 cm³
1090 mm
125 mm
400 mm
390 mm
510 mm
Package contents
790 x 540 x 1090 mm
Sales pack
quantity
1 pc
Item number
39122
105
Saw head DS TS 32
Wire saw DS WS 15
■
■
■
■
Wall sawing with the D-LP 32
Wire sawing with the DS WSS 30
Auto-pivoting blade guard holder
Package contents
DS TS32 54CM3
1x Sawing head TS32 54
Technical data
Drive unit
Engine
displacement
Height saw head
54 cm³
■
400 mm
Length sawing
head
Max. cooling water
pressure
Max. operating
pressure
Min. cooling water
supply rate
Min. storage
temperature
Oil flow rate - max
510 mm
Oil flow rate - min
30 l/min
■
6 bar
■
200 bar
1 l/min
■
-15 °C
Sales pack
quantity
■
■
■
■
■
Cutting through extremely thick
components
Cutting openings without overcutting
(doors, windows and shafts etc.)
Small structural modifications (cutting
through columns and beams)
Rugged and durable saw system with
well-proven components
Tested and certified to meet safety
requirements
Dimensions (LxWxH) - drive
Dimensions (LxWxH)- control unit
Drive wheel
diameter
Guide wheel
diameter
IP protection class
80.2 dB (A)
Max. cooling water
pressure
Max. fuse rating
6 bar
Min. cooling water
supply rate
Min. flow rate of
compressed air
5 l/min
1)
369315
Package contents
DS WS10-E 3x400V
1x Wire saw DS WS10-E 3x400V assy, 1x Assembly tool 1/2”, 1x Tool set DS WS
106
Package contents
DS WS15 3x400V
1x Wire saw DS WS15 3x400V assy, 1x Tool set DS WS
1 pc
79 dB (A)
Max. cooling water
pressure
Max. fuse rating
6 bar
1560 x 790 x 920 mm
520 x 590 x 920 mm
280 mm
IP 65 (EN 60529), IP 54
(IEC 529)
4
32 A
5 l/min
100 l/min
40 kVA
Sales pack
quantity
1 pc
Item number
365429
Wire saw DS WSS30
536 x 692 x 1221 mm
■
520 x 590 x 920 mm
280 mm
■
■
200 mm
■
IP 65 (EN 60529)
■
Technical demolition of large structural components (bridges, chimneys,
foundations…)
Structural alteration of buildings
Sawing applications in surroundings
sensitive to noise
Quick adaptation of the powerful Hilti
D-LP32/DS-TS32 wall saw
Very smooth and easy starting using
the infinitely adjustable electric remote
control
32 A
100 l/min
Sales pack
quantity
Dimensions (LxWxH) - drive
Dimensions (LxWxH)- control unit
Drive wheel
diameter
IP protection class
1)
Technical data
Min. cooling water
supply rate
Min. flow rate of
compressed air
Min. generator
power
Item number
1 pc
Technical data
Structural alteration of buildings – cuts
openings of all kinds and almost any
shape
Sawing anything from heavily reinforced
concrete to thick stonework
Technical demolition of structural
components (bridges, chimneys,
foundations)
Up to 22 kW peak power and 15 kW
effective continuous power rating with
minimum water cooling – requires only
a 32 A power supply
Smooth, infinite adjustment of the drive
speed from the control console
100 l/min
Wire saw DS WS 10-E
■
Hilti D-LP32 hydraulic
power unit
Item number
361102
Package contents
DS WSS30
1x Wire saw DS WSS30 assy
Technical data
Drive unit
Drive wheel
diameter
Guide wheel
diameter
Max. cooling water
pressure
Max. operating
pressure
Min. cooling water
supply rate
Min. storage
temperature
Nominal power
DS-TS 32/D-LP 32 wall
saw
500 mm
200 mm
6 bar
210 bar
5 l/min
-15 °C
32 kW
Oil flow rate - min
80 l/min
Power source type
Hydraulic
Sales pack
quantity
1 pc
Item number
365430
107
Floor saw blade DS-BF C1/LP
Ordering
designation
DS-BF
350/25.4/
C1/LP
Blade diameter Arbour
350 mm
Technical data
■
Cutting concrete
■
Designed for use with low-power saws
(5-18PS / 4-13kW)
■
Ordering
designation
Blade specification is matched to the
material to be cut and saw power rating
Type
Standard
Laser-welded
segments
Wet or dry
operation
Arbour
Yes
Blade diameter
350 mm
Blade thickness
2.8 mm
Hilti HI mount
No
Hydrostress HY
mount
Mount type
No
Number of
segments
24
8 mm
2.8 mm
No
DS-BT
800/4.4/HI
C-10E
Cutting asphalt
■
(5-18PS / 4-13kW)
Wear bars help prevent wear of the
steel disc at the segment bonding zone
■
■
Ordering
designation
DS-BF
350/25.4/
A1/LP
350 mm
No
1 pc
Base materials
Asphalt
Type
Standard
Laser-welded
segments
Wet or dry
operation
Arbour
Yes
Blade diameter
350 mm
Blade thickness
2.8 mm
Hilti HI mount
No
Hydrostress HY
mount
Mount type
No
8 mm
Asphalt
2.8 mm
No
Concrete, soft
to hard
Hilti HI mount Hydrostress HY mount Sales pack
quantity
Yes
■
■
■
■
Cutting green (young) concrete
(5-18PS / 4-13kW)
Wear bars help prevent wear of the
steel disc at the segment bonding zone
Item number
360644
Ordering
designation
DS-BF
350/25.4
CG1/LP
Wet and dry
350 mm
Number of segments Usable segment height Base materials
25.4 mm 24
8 mm
■
■
■
108
Cutting reinforced concrete
Fast cutting and long blade life
One specification for all types of
concrete
Technical data
Technical data
2051590
Base materials
Concrete, green
Type
Standard
Laser-welded
segments
Wet or dry
operation
Arbour
Yes
Blade diameter
350 mm
Blade thickness
2.8 mm
Hilti HI mount
No
Hydrostress HY
mount
Mount type
No
Concrete, green 2.8 mm
■
■
■
concrete
Item number
360656
Wall saw blade DS-BT HI C-10E
1 pc
Wet and dry
No
4
25.4 mm
No Hilti HI mount, No
Hydrostress HY mount
Blade thickness Hilti HI mount Sales pack
quantity
1 pc
No
Item number
Item number
368673
1 pc
Wall saw blade DS-BT HI/HY C-20E
25.4 mm
Number of segments Usable segment height Base materials Blade thickness Hilti HI mount Sales pack
quantity
25.4 mm 24
8 mm
Technical data
■
60 mm 40
25.4 mm
Floor saw blade DS-BF A1/LP
800 mm
Floor saw blade DS-BF CG1/LP
Wet and dry
Number of segments Usable segment height Blade thickness Hilti HI mount Hydrostress HY mount Sales pack
quantity
25.4 mm 24
Base materials
Concrete, soft to hard
Laser-welded
segments
Wet or dry
operation
Arbour
Yes
Blade diameter
800 mm
Hilti HI mount
Yes
Hydrostress HY
mount
Number of
segments
Segment
dimensions
Segment height
No
Wet
60 mm
Technical data
Base materials
Laser-welded
segments
Wet or dry
operation
Arbour
Yes
Hilti HI mount
Yes
Hydrostress HY
mount
Segment height
No
Segment length
40 mm
Segment width
5 mm
Usable segment
height
8 mm
DS-BT 800/HI
C-20E
800 mm
60 mm 46
8 mm
Concrete, soft to hard Yes
900 mm
60 mm 52
8 mm
1000 mm
60 mm 55
1200 mm
60 mm 65
DS-BT 900/HI
C-20E
DS-BT 1000/HI
C-20E
DS-BT 1200/HI
C-20E
Hilti HI
mount
Wet
60 mm
10 mm
Hydrostress
HY mount
Sales pack
quantity
1 pc
356210
No
1 pc
416757
8 mm
No
1 pc
356211
8 mm
No
1 pc
356212
No
Item number
40
40 x 4.4 x 10 mm
10 mm
109
Wall saw blade DS-BT HI/HY C-M
■
■
■
DS-BT 800/HI C-M 800 mm
Number of
segments
Usable segment Base materials
height
60 mm 46
Technical data
concrete
8 mm
DS-BT 1500/HI CM-H
Yes
Blade diameter
800 mm
Hilti HI mount
Yes
Hydrostress HY
mount
Number of
segments
Segment
dimensions
Segment height
No
■
46
■
No
Ordering designation Blade diameter Arbour
DS-BT 800/HI C-H 800 mm
Number of Usable segsegments ment height
60 mm 46
8 mm
Base materials
■
■
60 mm
■
40 x 4.7 x 10 mm
Yes
Blade diameter
800 mm
Hilti HI mount
Yes
Hydrostress HY
mount
Number of
segments
Segment
dimensions
Segment height
No
■
■
■
DS-BT 800/HI CM-H
DS-BT 1200/HI CM-H
110
800 mm
1200 mm
Number of Usable segment
segments height
60 mm 46
DS-BT 800/HI CM-H/
CP+
800 mm
60 mm 40
1200 mm
60 mm 65
DS-BT 1200/HI CM-H/
CP+
Technical data
10 mm
10 mm
Base materials
Number of segments Base materials
Concrete, soft to
medium
Concrete, soft to
medium
■
■
Hilti HI
mount
Technical data
Base materials
273553
Laser-welded
segments
Wet or dry
operation
Arbour
Concrete, soft to
medium
Yes
Wet
60 mm
Hilti HI mount
Yes
Segment height
10 mm
Segment length
40 mm
Laser-welded Segment dimensions Sales pack
segments
quantity
4
Item number
Yes
Yes
40 x 4.8 x 10 mm
1 pc
2052711
Yes
Yes
40 x 4.4 x 10 mm
1 pc
2052713
Good balance between cutting speed
and wire life
46
40 x 4.7 x 10 mm
10 mm
Bead diameter Wire length
DS-W 10.5 CM+
11 mm
Item number
356214
Base materials
Concrete, medium
Laser-welded
segments
Wet or dry
operation
Arbour
Yes
Hilti HI mount
Number of beads per metre Flexible
connector
pre-assembled
40
No
10000 mm 40
Yes
Technical data
Base materials
Type
Sintered
Wet or dry
operation
Bead diameter
Wet
Colour
Green
Number of beads
per metre
40
Base materials
Colour Type
11 mm
Sales pack
quantity
Item number
439028
Concrete, soft to hard Green Sintered 1 m
439020
Concrete, soft to hard Green Sintered 1 pc
Diamond wire DS-W Steel 20%
■
Cutting reinforced concrete with up to
20% steel content
Universal
Technical data
Base materials
Type
Electroplated
Wet
Yes
Wet or dry
operation
Colour
Hydrostress HY
mount
Segment height
No
Diameter
10.2 mm
No
Segment length
40 mm
Segment width
5 mm
Flexible connector
pre-assembled
Number of beads
per metre
Usable segment
height
10 mm
Hilti HI
mount
Concrete, medium Yes
Sawing reinforced concrete
Openings and penetrations for doors
and windows
Corrective / remedial work on facades,
partitions and walls
Good balance between sawing speed
and blade life
Sandwich segments for constant segment width over the entire life of the
blade
DS-W 10.5 CM+/10M 11 mm
Good balance between cutting speed
and blade life
High-quality steel core
60 mm 65
60 mm
Wall saw blade DS-BT HI CM-H
273552
1 pc
1 pc
Diamond wire DS-W 10.5 CM+
Wet
1 pc
Item number
295344
Laser-welded
segments
Wet or dry
operation
Arbour
No
No
Sales pack
quantity
Item number
Yes
No
10 mm
Sales pack
quantity
Hydrostress HY
mount
10 mm
Base materials
Hilti HI mount Hydrostress
HY mount
Hilti HI
mount
Wall saw blade DS-BT CM-H/CP+
Wet
1 pc
Technical data
Base materials
10 mm
60 mm 84
Laser-welded
segments
Wet or dry
operation
Arbour
Yes
concrete
60 mm 80
1600 mm
Wall saw blade DS-BT HI/HY C-H
■
■
■
1500 mm
DS-BT 1600/HI CM-H
Number of segments Usable segment height
Base materials
Hilti HI mount Hydrostress HY mount Sales pack
quantity
Hydrostress
HY mount
No
No
Wet
■
60 mm
12 mm
Sales pack
quantity
1 pc
1 pc
Item number
DS-W 10.2 STEEL
20p.c.
Number of beads
per metre
40
Flexible connector
pre-assembled
No
Base materials
Colour Diameter
Concrete, soft to hard Black
Type
Black
Wet or dry
operation
10.2 mm Electroplated Wet
40
Sales pack
quantity
1m
Item number
377830
273547
273551
111

Diamond Coring and Sawing Chapter 3471.9kB

Transcription

Similar documents

Tel: 01473 832223

GranQuartz - Ameripolish

GranQuartz

Concrete Sound Barrier Broucher

RMC

Foundation Brochure.pub

MasterSeal® NP 1 - Coastal Construction Products

NEWS FLASH

Al Azizia Panda United, Distribution Facility

Data Sheet