Santon Aquaheat SS

CI/SfB
(53.3)
x
Aquaheat SS
Horizontal and vertical water heaters
Unvented water heaters
October 2010
Unvented water heaters
Aquaheat SS
Horizontal and vertical water heaters
The new range of Aquaheat SS unvented horizontal and vertical water heaters are available in 50 – 100 litre capacities.
Whilst the attractive, modern design makes the Santon water heaters perfect for wall mounting, they are also able
to be mounted within air conditioning ceiling voids. With no sacrificial anode necessary there is no need for regular
maintenance checks or costly replacements. The superior heat loss characteristics and resultant energy efficiency
perfectly demonstrates Santon’s commitment to providing performance and value for money.
Using only high grade Duplex stainless steel the cylinders are manufactured in our own factory in the United
Kingdom. Fully tested to meet stringent UK and European safety standards, these low maintenance, high performance
heaters are supplied with a 10 year cylinder warranty with on-site service support.
Features and benefits
• A choice of 50, 80 or 100 litre capacities
• Factory-fitted temperature and pressure relief valve
• Temperature gauge
• Expansion vessel
• Cold water control kit
• Installation brackets
• Neon indicator light
• Detailed fitting instructions
• Ideal for use in:
Ceiling voids or risers (central voids)
Remote areas
Washrooms with multiple basins (toilet cores)
Student accommodation
Holiday homes
Commercial Unvented
Selection Guide
Capacity of
Water Heater
Number
of Basins
50 litres
4–5
80 litres
5–8
100 litres
8–10
Note: These figures are for guidance
only and local conditions should be
taken into account when sizing the
installation. For full details contact
our Specification Advice Hotline on
01603 420128 or fax 01603 420229
SPECIFICATION ADVICE: 01603 420128 E-MAIL: [email protected]
Specification
Rating
3kW @ 240v.
Vertical
Element
Long life Incalloy 825 element and plate.
Outer casing
White painted steel, stove enamelled corrosion resistant.
Insulation
38mm thick CFC/HCFC-free (ODP zero) flame retardant expanded
polyurethane.
Thermostat
Electromechanical capillary type adjustable from 10ºC to 70ºC.
Safety
Factory-fitted temperature and pressure relief valve set at 90ºC and 10 bar.
Pressure reducing valve at 3.5 bar. Non return valve. Pressure relief valve at 6 bar.
Expansion vessel. Over-temperature capillary cut-out set at 85ºC.
All units pressure tested to 15 bar. IPX 4 rated.
A
Anode
None required.
D
E
B
C
Approvals
BEAB and kiwa approved. Manufactured in the UK in our BS EN ISO
9001:2008 registered factory.
400
min
Installation
Horizontal
Fixing
Horizontally or vertically wall-mounted with brackets provided.
Plumbing
/4" BSP Male connections.
3
Maximum working pressure
10 bar.
B
D
Guarantee
E
C
400
min
Electrical
240v AC, 50/60Hz.
The Aquaheat SS duplex stainless steel cylinder carries a full 10 year on-site
parts and labour transferable guarantee against faulty manufacture or
materials provided that:
A
• It has been correctly installed as per the instructions contained in the
instruction manual and all relevant Codes of Practice and Regulations in
force at the time of installation.
Dimensions
• It has not been modified in any way other than by Santon or Heateam.
Model
Capacity
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
H50
H80
H100
V50
V80
V100
50 litre
80 litre
100 litre
50 litre
80 litre
100 litre
695
953
1141
695
953
1141
451
451
451
470
470
470
475
475
475
475
475
475
105
105
105
238
238
238
100
100
100
100
100
100
• It has not been frost damaged.
• It has only been used for the storage of potable water.
(Max 250mg/l chloride)
• Following commissioning the unit is put into service within a period of
7 days. If this is not the case it must either be drained or regularly flushed.
• It has not been tampered with or been subjected to misuse or neglect.
• Within 60 days of installation the user completes and returns the
certificate supplied along with proof of purchase to register the product.
• It has been installed in the United Kingdom.
All other components carry a 2 year guarantee.
Ordering Guide
Model
Product Code
H50
H80
H100
V50
V80
V100
94:050:047
94:050:049
94:050:051
94:050:053
94:050:055
94:050:057
Unvented water heaters
Technical Specification
Products
Unvented Water Heating
PremierPlus | Aquaheat | Aquaheat SS | Aqualine
Solar Unvented Water Heating
Vented Water Heating
Drinking Water
Hand Hygiene
PremierPlus Solar
Aquarius | Taps
Speediboil
EV 2008 | Aqua-dri
Instantaneous Water Heating
Combination Storage
PowerPack
R Unit
Rectangular Heating and Storage
Immersions
DFB
Industrial
National Service Network
A nationwide network of experienced engineers is available to provide
fast and efficient on-site service support if required. Spare parts for
Santon products are readily available through a network of approved
spares stockists.
Santon, Hurricane Way, Norwich, Norfolk, NR6 6EA
Specification
Tel: 01603 420128 Fax: 01603 420229 E-mail: [email protected]
After Sales Service
Tel: 0844 871 1530 Fax: 0844 871 1528 E-mail: [email protected]
Website
www.santon.co.uk
The pace of product development is such that we reserve the right to change product specifications without notice.
We do, however, strive to ensure that all information in this catalogue is accurate at the time of going to publication.
© October 2010 Issue 1
part no. 94 900 021