Nantucket BeadBoard - KI

Transcription

Nantucket BeadBoard - KI
PRODUCT GUIDE
2nd Edition February 2010
www.ki-lumber.com
Nantucket BeadBoard
Nantucket® Beadboard can be
installed in new or existing construction and is an excellent
choice for interior wall and ceiling applications.
Nantucket® BeadBoard interior
products (MDF) are manufactured from premium grade MDF
medium density fiberboard.
MDF is a very stable material
and is ideally suited for a wide
range of interior locations. Wainscoting, ceilings, entire walls,
closets, pantries and attics are
just a few of the possible applications. MDF has an excellent surface for painting, allowing for unlimited color
combinations in either latex (water based) or oil based paints. MDF is easily
cut using traditional hand or power saws and can be installed using construction adhesive and finishing nails.
Nantucket® BeadBoard interior moisture resistant products (MRI) are manufactured from premium grade moisture resistant fiberboard. This moisture resistant fiberboard is well suited for low to medium humidity areas such as bathrooms and basements. MRI products can be painted using latex (water based)
or oil based paints. MRI products are cut using a jigsaw or circular saw and
can be installed using construction adhesive and finishing nails. When using
moisture resistant products, pre-drilling holes for finish nailing may be necessary.
Nantucket® BeadBoard exterior water resistant products (MRX) are manufactured from Extira® a treated exterior wood composite material. MRX products are recommended for medium to high humidity locations. Exterior porch
ceilings and soffits are humid locations where MRX products excel. MRX
products can be finished in either latex (water based) or oil based paints. MRX
products are cut using a jigsaw or circular saw and can be installed using construction adhesive and finishing nails. When using moisture resistant products,
pre-drilling holes for finish nailing may be necessary.
Page 35
Nantucket BeadBoard
Nantucket Bead Board
Item
No.
Description
136090
1/4"X4X8 MDF-Raw Bead Board
“Standard 2” Bead”
Available special order are many
sizes (up to 4’x16’) and thickness
(1/4”,3/8” & 1/2”) in sheet products. Nantucket also produces
several types of bead on the
boards. Call the office for pricing
and lead-time.
Page 36

Similar documents