ENG_VM 750-960-1260 - Doosan Machine Tools America

Heavy Duty Vertical Machining Center
02
Heavy Duty Vertical Machining Center
The VM 750/960/1260 series of Vertical Machining Centers are built to world-class standards to
ensure world-class results. Its powerful drives, heavy duty construction and unsurpassed rigidly
provide exceptional precision and years of trouble free performance.
03
Speed Spindle
High speed spindle of high quality and rigidity
helps increase the efficiency and performance of the machine.
VM 750 / 960 / 1260
Gear Type
2- face locking tool system
Max. spindle speed
6000 r/min
std.
8000 r/min
opt.
Motor (continuous / 30 min)
18.5/15 kW (25/20 Hp)
(VM750(L),VM960(L))
22/18.5 kW (30/25 Hp)
(VM1260)
Common utilization of 2-face binding tool
(BIG PLUS)
• Powerful Cutting of Large Objects
Powerful processing capability of large objects with maximum torque is offered with
2 stage gear drive.
• High Speed Tapping std.
Standard adoption of rigid tap allows high speed tapping without the tap holder.
• Rigidity and Stability
Rigid angular contact bearing is adopted to assure rigidity and stability by maintaining the rigidity even during powerful cutting.
Built in Type
opt.
Max. spindle speed
12000 r/min
Motor
(continuous / 30 min)
30/25 kW
(40/34 Hp)
04
• Rigid and Precise Mandrel
Adoption of 100 diameter rigid ceramic bearing
and oil supply (oil mist) method assure high
precision even during the high speed rotation.
• Highest Speed Mandrel in the Class
Adoption of low vibration built-in motor offers
optimum molding with highest mandrel speed
(12000 r/min) and highest torque of 419.44
N·m in the same class.
Spindle power-torque diagram
Gear Type
VM 12606000 r/min
VM 750(L), VM 960(L)6000 r/min
VM 750(L), VM 960(L)6000 r/min
Torque: N: N.m.m(ft-lbs)
(ft-lbs)
Torque
Power: kW
: kW(Hp)
(Hp)
Power
588(434)
(434)
588
561.5(414)
(414)
561.5
490(362)
(362)
490
455.7(336)
(336)
455.7
392(289)
(289)
392
MIN
3030
MIN
CONT
CONT
294(217)
(217)
294
(72)
9898(72)
00
(27)
2020(27)
18.5(25)
(25)
18.5
15
(20)
15 (20)
14.3(19)
(19)
14.3
11.6(16)
(16)
11.6
11.4(15)
(15)
11.4
11.1(15)
11.1(15)
11.6(16)
(16)
11.6
9 (11)
9 (11)
196(145)
(145)
196
310500
500
310
(40)
3030(40)
Torque: N: N.m.m(ft-lbs)
(ft-lbs)
Torque
MIN
3030
MIN
CONT
CONT
17.1(13)
(13)
17.1
14.3(11)
(11)
14.3
167.6(124)
(124)
167.6
129.4(96)
(96)
129.4
141.1(104.1)
(104.1)
141.1
108.8
(80)
108.8 (80)
(13)
1010(13)
100(74
(74) )
100
00
12551500
1500
1625 2000
20004500
10001255
45006000
6000
1625
1000
Power: kW
: kW(Hp)
(Hp)
Power
700(939)
(939)
700
668.4(896)
(896)
668.4
600
(805)
600 (805)
561.5(753)
(753)
561.5
500(369)
(369)
500
00
(30)
2222(30)
(27)
2020(27)
18.5(25)
(25)
18.5
(13)
1010(13)
35.3(26)
(26)
35.3
29.4(22)
(22)
29.4
00
1255 1625
1625 2000
2000
6000
1255
6000
310
310
Spindlespeed
speed(r/min)
(r/min)
Spindle
(40)
3030(40)
Spindlespeed
speed(r/min)
(r/min)
Spindle
Built in type
VM 750(L), VM 960(L), VM 1260
VM 750(L), VM 960(L), VM 1260
8000 r/min
12000 r/min
Torque::NN..mm(ft-lbs)
(ft-lbs)
Torque
Power::kW
kW(Hp)
(Hp)
Power
600(442.8)
600(442.8)
30MIN
MIN
30
CONT
CONT
500(369.0)
500(369.0)
400(295.2)
400(295.2)
20(27)
(27)
20
18.5(25)
(25)
18.5
15(20.1)
(20.1)
15
300(221.4)
300(221.4)
200(147.6)
200(147.6)
100(73.8)
100(73.8)
00 5 300.5 500
5 300.5 500
30(40)
(40)
30
110.7(81.7)
(81.7)
110.7
89.2
(65.8)
89.2 (65.8)
1000
1000
15001602
1602
1500
Spindlespeed
speed(r/min)
(r/min)
Spindle
10(13)
(13)
10
22.5(16.6)
(16.6)
22.5
17.6(13.0)
(13.0) 00
17.6
3425
5900
8000
3425 5900 8000
Torque::NN..mm(ft-lbs)
(ft-lbs)
Torque
Power::kW
kW(Hp)
(Hp)
Power
490(362)
(362)
490
419.4(310)
(310)
419.4
392(289)
(289)
392
349.8(258)
(258)
349.8
294(217)
(217)
294
238.1(176)
(176)
238.1
196(145)
(145)
196
22(30)
(30)
22
15(20)
(20)
15
30MIN
MIN
30
CONTI
CONTI
S325%
25%
S3
11.7(116)
(116)
10.7(14)
(14)11.7
10.7
9.7(13)
(13)
7.3(10)
(10)9.7
7.3
98(72)
(72)
98
00
35(47)
(47)
35
5006001000
5006001000
2000 2500
2500 4500
4500
2000
25(34)
(34)
25
24.7(33)
(33)
24.7
20.7
(28)
20.7 (28)
20
(27)
20 (27)
15(20)
(20)
15
10(13)
(13)
10
5 (8)
(3) 5 (8)
22(3)
1.7
(2) 00
1.7
(2)
85001000012000
85001000012000
Spindlespeed
speed(r/min)
(r/min)
Spindle
05
Machine Structure
Stable bed and column assembles are designed for
high speed and heavy duty machining.
VM 750 / 960 / 1260
Machine Structure
Rigid Construction for heavy duty applications
• The rigidity is increased by rationally arranging the box type
structure of bed, column and saddle.
• Rigidity and stability are assured with the wide box guide
structure.
• The mandrel head is supported by the wide guide way for
the stable cutting performance.
• Wide z-side slide and wide y-side transport support prevents
skewing and makes it suitable for powerful, heavy cutting.
Exceptionally durable all in one
single frame construction
The widely spaced bed slides are high frequency deep heat
treated providing outstanding performance during heavy duty
interrupted cutting operations.
Radial rib structure
The processing quality is improved as the weight is reduced
and shaking with processing thrust during intermediate
cutting is absorbed.
06
Table
Wide range and driverse work-pieces
The large size X-axis table, allows mounting and working of
wider and more diverse work-pieces.
X x Y axis
1600 x 800 mm (63.0 x 31.5 inch)
1900 x 800 mm (74.8 x 37.4 inch)
2400 x 950 mm (94.5 x 37.4 inch)
2600 x 950 mm (102.4 x 37.4 inch)
2800 x 1260 mm (110.2 x 49.6 inch)
(VM 750)
(VM 750L)
(VM 960)
(VM 960L)
(VM 1260)
Table loading capacity
3000 kg (6613.8 lb)
3500 kg (7716.2 lb)
4000 kg (8818.4 lb)
4500 kg (9920.8 lb)
8000 kg (17636.7 lb)
(VM 750)
(VM 750L)
(VM 960)
(VM 960L)
(VM 1260)
07
Rapid Traverse
All guideways are wide box type for unsurpassed long-term rigidity and
accuracy. The guideways are induction hardened and precision ground.
Fluroplastic resin, Rulon® 142, is boned to the mating surfaces and
then hand scraped to ensure perfect fit and tolerances. The fluroplastic
resin with the forced way lubrication combine to provide a low friction
surface and virtually eliminates guide wear. All guideways are fully
protected from chips and damage.
Rapid traverse rate (VM 750/960/1260)
20/16/12 m/min (787.4 / 629.8 / 472.4 ipm)
Ball Screw & Driver
Large diameter ball screw for powerful cutting
• Double Edge Fixed Type Transport Structure
• Double Anchor Method of High Accuracy Pretension
• Fast Response
Minimized Non Cutting Time
Faster tool change time using cam increases productivity than previous model.
08
Automatic tool changer
Tool magazine
Tool change time (T-T-T)
Tool storage capacity
2.5 s
30 tools std.
40 tools (VM 750/960 std.
VM 1260
opt.
)
Eco Friendly & Ergonomic
Centralized deployment of repair parts
No need for frequent fill-up of lubricant
Storing parts for repair in a
single place allows you to
repair the machine more
easily
The oil filter helps enhance the
life of the tools and productivity
by separating lubricant from
water. (Large 12L)
Coolant gun
Lubricant recovery structure
opt.
This helps improve the
cleanliness and life of
cutting oil.
The coolant gun helps you
work in a clean environment.
Spindle Head Cooling System
Spindle head cooling system to maintain the best spindle.
• Thermal displacement of the mandrel is minimized at the highest rotational speed
(after 30 min. pre-heating)
• Since the oil jacket around the mandrel and heat generation parts of all moving units have the forced
circulation of cooling lubricant of the oil cooling system, the whole mandrel maintains the uniform
temperature to ensure high precision even during the high speed rotation.
A refrigerated spindle cooling system circulates cooling oil to maintain a constant temperature for high
accuracy, regardless of the ambient temperature or cutting conditions.
Easy Chip Disposal
std. Two spiral-type coil
conveyor are installed in
the machine with each in
the front and rear position.
Proper disposal of cutting chips greatly affects
productivity. During machining, the screw type chip
conveyors provided as standard equipment, move chips
to the chip buckets through the chip conveyor at the side
of the machine.
The lift chip conveyor is
used for faster chip
disposal.
09
Machining Capacity
Superior surface finishes and machining accuracy are achieved through using standard processing solutions
such as high-speed / high - precision contour control and thermal displacement compensation.
High Speed / High Precision Contour Control
* DSQ : Doosan Super Quality
Specimen tested :VASE
Smoothes the movement of the machine, improving surface
roughness and profile accuracy of corners and edges.
• DSQ1(AICC2_200 Block + Machining condition selection function) std.
• DSQ2(DSQ1 + Data server [1GB]) opt.
• DSQ3(DSQ2 + High speed processing _ 600 Block) opt.
The Optimal Feed Control
With DSQ
Without DSQ
opt.
* DAFC : Doosan Adaptive Feedrate Control
Optimal feed control is based on checking
the load of spindle at real time.
High Efficient DTMM
opt.
DTMM software
* DTMM : Doosan Tool load Monitoring for Machining Centers
Spindle load
The technology of protecting tool and machine in
abnormal load during the cutting process.
Detection cycle =
Program interpolation cycle
Individual
servo axis load
Stop command,
when abnormal load is detected
Stop command,
when abnormal
load is detected
Tool life management linked
Smart thermal displacement multi compensation technology
std.
* DSTC : Doosan Smart Thermal Control
We materialized the minimization of thermal displacement so as to maintain high-recision in spite of long-time processing.
before
It enables to calibrate
the change in position
of tool through the
expansion of spindle
shaft at high-speed rotation.
after
Calibration of structure thermal displacement
It calibrates inconsistent bending or
expansion owing to the change in
external temperature using a number
of temperature sensors.
10
Calibration of dynamic displacement
of spindle
Thermal
displacement of spindle
Calibration of static displacement of spindle
Deviation of thermal displacement of
spindle after calibration
Thermal displacement of
spindle before calibration
Spindle rotation
time
With smoothing
Thermal displacement
compensation is achieved
with 5 algorithm including
smoothing function.
Without smoothing
Easy Operation Package
These Doosan software packages have been customised to provide fast and easy operation for tooling,
workpiece and program set up. These features minimise the lost time caused by process setup and maximises
the machine'productivity.
Operation / Maintenance
Tool Data
Registry Table
ATC Recovery
Help
Operator can edit &
check the tool number
of magazine pot.
It makes operator
recovery of the ATC
from alarm status
easier.
Sensor Status
Monitor
Tool Load
Monitor opt.
Solenoid valve and
Sensor status can be
checked without the
electric diagram.
The axis and spindle
load in cutting are
monitored which
minimises damage to
the tool.
Engraving
Renishaw Gui
opt.
It makes number and
letter engraving
programming easier.
(Tool measure std. )
(Work measure opt. )
Tool & work measure
system of Renishaw is
operated on
conversational screen.
Pattern Cycle
Calculator
It is easy to make
pattern cycle program
by this funciton.
Operator can easily
calculate numerical
formulas in relation to
arc and hole patterns.
11
Machine Capacity
Provides high-productivity and high-accuracy in a variety of machining operations
VM 1260 [12000 r/min]
Face mill
•
ø125mm (4.92 in.) Face mill (8Z)
Carbon steel (SM45C)
Machining rate
Spindle speed
Spindle speed
500 r/min
500 r/min
Feedrate
Feedrate
1660 mm/min (65.4 ipm)
320 mm/min (12.6 ipm)
Gray casting (GC25)
Machining rate
3
3
End mill
•
Gray casting (GC25)
ø 63mm (2.5 in.) Endmill (4Z)
Machining rate
1260 cm /min (77 in /min)
1012 cm /min (61.8in /min)
Spindle speed
Spindle speed
500 r/min
500 r/min
Feedrate
Feedrate
2520 mm/min (99.2 ipm)
320 mm/min (12.6 ipm)
Drill
3
Carbon steel (SM45C)
ø73mm (2.87 in.) Drill (2Z)
Machining rate
635 cm /min (38.8 in /min)
3
•
ø 63mm (2.5 in.) Endmill (4Z)
660 cm /min (40.3 in /min)
Face mill
ø125mm (4.92 in.) Face mill (8Z)
•
Carbon steel (SM45C)
3
3
•
End mill
3
Tap
3
Carbon steel (SM45C)
Spindle speed
Tool
500 r/min
M42 x P4.5
Feedrate
Spindle speed
140 mm/min (5.5 ipm)
400 r/min
A standard rigid tapping function allows synchronized, high-speed tapping. This eliminates the need for special tap holders.
Machining Accuracy
Roundness
For increased repeatability and reliability
Roughness
P - R - W - Profile leveled Filter
ISO 11562 (M1)
Lc / Ls = 300 Lc = 0.800 mm
8.2 µm
Ra 0.22 µm
2.5
0.0
-2.5
• Model : VM 750 / 900 / 1260
Pick-up TK 300
Lt = 4.80 mm Vt = 0.50 mm/s
• Material : AI6061
• Tool : ø10mm (ø0.39 inch)
(Endmill : 3Z)
• Spindle speed : 6000 r/min
• Feedrate : 900 mm/min (359.4 ipm)
The results indicated in this catalog may not be obtained due to differences in environmental conditions during measurement and cutting conditions.
12
Optional Equipment
Operator's convenience and operability
Interface for Additional Axis
Connection example of
fixture interface
Connection example of
additional axis interface
In case of additional axis, Hydraulic unit may be
additionally necessary according to rotary table
specification. Hydraulic power unit is an optional
accessary for rotary table and hydraulic fixture line.
Recommandable rotary table size
VM 750/750L
VM 960/960L
VM 1260
: ø320 mm (12.6 inch)
: ø500 mm (19.7 inch)
: ø500 mm (19.7 inch)
Fixture check list (for hydraulic / pneumatic fixtures)
• Pressure source
• Hydraulic power unit
Hydraulic P/T A/B
Supply scope :
Pneumatic P/T A/B
(Please check the below detail specification,
if you want Doosan to supply.)
• Number of ports
1pair (2-PT 3/8"port)
2pair (4-PT 3/8"port)
User
DOOSAN
Use Doosan standard unit
24 L/min (45 bar)
Special requirement
_______ L / min (gal/min) at _______MPa (psi)
Through the spindle coolant
Minimum quantity lublication
※ Contact Doosan for more information
Oil skimmer
Misting device
13
External Dimensions
* : VM 750L
14
180
(7.1)
1129
(44.4)
750
(29.5)
1000(39.4)
1420(55.9) 690(27.2)
3040(119.7)
1129
(44.4)
4760(187.4) 273
4250 (167.3)
(10.7) 510
2265(89.2)
730 (20.1)
1255
(28.7) (49.4)
880(34.6)
100(3.9) x 6 100
(3.9)
1255
(49.4)
4760(187.4)
4250 (167.3)
2265(89.2)
730
(28.7)
2830(111.4)
880(34.6) 880(3.9)
100(3.9)
100 x 6 100
180 x 6 100(3.9)
100(3.9)
(7.1) (3.9)
(3.9)
250
(9.8)
DETAIL T-SLOT
1600(63.0)
1800(70.9) (Stroke)
900(35.4)
900(35.4)
1900(74.8)
DETAIL T-SLOT
18 H8
12 22
(0.5)(0.9)
1500(59.1) (Stroke)
750(29.5)1900(74.8)
750(29.5)
Cutting Range
DETAIL T-SLOT
Cutting Range
18 H8
DETAIL T-SLOT
880(3.9)
100(3.9) x 6 100
(3.9)
180
(7.1)
1800(70.9) (Stroke)
Cutting Range
3185(125.4)
418
900(35.4)
900(35.4)
18 H8
(16.5) 879
3649(143.7)
(34.6)
5095(200.6)
12 22
(0.5)(0.9)
1600(63.0)
1640
*1940
1800(70.9) (Stroke)
900(35.4)
900(35.
1500(59.1) (Stroke)
750(29.5) 750(29.5)
CABLE INLET
1331(5
(POWER CABLE)
1900(74.8)
58
(2.3)
180
(7.1)
12 22
(0.5)(0.9)
12 22
(0.5)(0.9)
40
(1.6)
25 750(29.5) 25
1070
2130(83.9)
(1.0) (Stroke) (1.0)
40 (42.1) 3505(138.0)
(1.6)
25 750(29.5) 25
25 (Stroke) (1.0)
750(29.5)
(1.0)
98(3.9)
(Stroke) (1.0)
1600(63.0) *1900(74.8)
25
(1.0)
4959(195.2) 275
4450(175.2)(10.8)509
2465
700 (20.0)
1285
(97.0)
(27.6) (50.6)
Top View
750
(29.5)
880(34.6)
100(3.9) x 6 100
(3.9)
880(34.6)
180 100(3.9) x 6 100180
100(3.9)
(7.1)
(3.9)(7.1)
250
(9.8)
12 22
(0.5)(0.9)
25 750(29.5) 25
(1.0) (Stroke) (1.0)
180
(7.1)
1000(39.4)
1420(55.9) 690(27.2)
3040(119.7)
1070
2130(83.9)
(42.1) 3505(138.0)
4959(195.2)
4450(175.2)
2465
700
(97.0)
(27.6)
98(3.9)
273
(10.7) 510
(20.1)
1285
(50.6)
880(34.6)
100(3.9) x 6 100
(3.9)
180
(7.1)
Hydraulic unit
12 22
(0.5)(0.9)
418
(16.5) 879
(34.6)
180
(7.1)
570
(22.4)
3185(125.4)
3649(143.7)
5095(200.6)
1500(59.1)
(Stroke)
1600(63.0)
*1900(74.8)
750(29.5) 750(29.5)
CABLE INLET
1426(56.1)
AIR INLET 1024(40.3)1024(40.3) 1426(56.1)(POWER CABLE)
*1208(47.6)
*1542(60.7)
*1542(60.7) *1208(47.6)
465 750
200
(18.3)(29.5)(7.9)
1600(63.0)
25 750(29.5) 25
(1.0) (Stroke) (1.0)
144
(5.7)
570
(22.4)
144
(5.7)
DETAIL T-SLOT
OIL COOLER
750(29.5) 25
(Stroke) (1.0)
4862(191.4)
3384(133.2)
1600(63.0) *1900(74.8)
Hydraulic unit
25
(1.0)
Side View
OIL COOLER
275
(10.8)509
(20.0)
1331(52.4) 1988(78.3) *2348(92.4) 1331(52.4)
58
58
4650(183.1) *5010(197.2)
(2.3)
(2.3)
4766(187.6) *5126(201.8)
3185(125.4)
418
(16.5) 879
570
3649(143.7)
(22.4)
(34.6)
5095(200.6)
570
(22.4)
180
(7.1)
1000(39.4)
900 1350(53.1)
973 322
1070 (35.4)2130(83.9)
(38.3) (12.7)
690(27.2)
3095(121.9)1420(55.9)
40 (42.1) 3505(138.0)
3545(139.6) 3040(119.7)
450
(1.6)
(17.7)
2830(111.4)
610(24.0) 420 730
2265(89.2)
835 (16.5)(28.7) 3415(134.4)
(32.9)
40
(1.6)
348(92.4) 1331(52.4)
58
010(197.2)
(2.3)
126(201.8)
(2.3)
144
(5.7)
1070
2130(83.9)
(42.1) 3505(138.0)
115(83.3)
pen
50(33.5)
050(41.3)
900 1350(53.1) 973 322
(35.4) 3095(121.9) (38.3) (12.7)
3545(139.6)
450
(17.7)
348(92.4) 1331(52.4)
58
010(197.2)
(2.3)
126(201.8)
850(33.5) *5126(201.8)
850(33.5)
4766(187.6)
*1050(41.3)
*1050(41.3)
4862(191.4)
3384(133.2)
(2.3)
1000
(39.4)
1640(64.6)
*1940(76.4)
CABLE INLET
(POWER CABLE)
1000
(39.4)
115(83.3)
5 750 200
pen
.3)(29.5)(7.9)
50(33.5)
050(41.3)
1988(78.3)*2115(83.3)
*2348(92.4) 1331(52.4)
1715(67.5)
Front View58 1331(52.4)4650(183.1)
58
Door Open
*5010(197.2)
1500(59.1) *1800(70.9)(Stroke)
750(29.5) 750(29.5)
*900(35.4) *900(35.4)
1500(59.1) *1800(70.9)(Stroke) Cutting Range
750(29.5) 750(29.5)
*900(35.4)
*900(35.4)418
3185(125.4)
18 H8
Hydraulic unit
4862(191.4)
OIL144
COOLER
(16.5) 879 (5.7)
3649(143.7)
3384(133.2)
(34.6)
5095(200.6)
Cutting
Range
1500(59.1) (Stroke)
AIR INLET
465 750 200
750(29.5) 750(29.5)
(18.3)
18T-SLOT
H8 (29.5)(7.9)
DETAIL
880(34.6)
100
100(3.9) x 6 100
(3.9)
(3.9)
Hydraulic unit
* : VM 750L
opt.
880(34.6)
100(3.9)
x6
180
(7.1)
VM 750/750L (Full Cover)
4862(191.4)
3384(133.2)
610(24.0) 420 730
2265(89.2)
1600(63.0) *1900(74.8)
835 (16.5)(28.7) 3415(134.4)
(32.9)
880(3.9)
100(3.9) x 6 100
(3.9)
900
1500
885
260
900 1350(53.1) 973 (35.4)
322
100(3.9)(59.1)
(34.8) (10.2)
(35.4) 3095(121.9) (38.3) (12.7)
250
(9.8) [stroke Down : 3145(123.8)]
3545(139.6) 3545(139.6)
450
(17.7)
65 750 200
8.3)(29.5)(7.9)
(40.3)
.8) 1024(40.3)
1640(64.6)1426(56.1)
(47.6)*1208(47.6)
*1542(60.7)
2.9) *1940(76.4)
6.5)
1715(67.5) *2115(83.3)
Door Open
850(33.5) 850(33.5)
*1050(41.3)
*1050(41.3)
1640(64.6)
1620(63.8)
1640(64.6)
*1940(76.4)
4900(192.9) *1940(76.4)
*5500(216.5)
610(24.0) 420 730
2265(89.2)
835 (16.5)(28.7) 3415(134.4)
(32.9)
880(34.6)
100(3.9) x 6 100
180
(3.9)
(7.1)
CABLE INLET
(POWER CABLE)
Hydraulic unit
1640
*1940C
1500(59.1) *1800(70.9)(Stroke)
1426(56.1) 1024(40.3)1024(40.3) 1426(56.1) 750(29.5) 750(29.5)
*1542(60.7) *1208(47.6)*1208(47.6)*1542(60.7) *900(35.4) *900(35.4)
1500(59.1) *1800(70.9)(Stroke) Cutting
Range
750(29.5) 750(29.5)
*900(35.4) *900(35.4)
18 H8
2830(111.4)
Hydraulic unit
2830(111.4)
Side View
OIL COOLER
610(24.0) 420 730
2265(89.2)
835 (16.5)(28.7) 3415(134.4)
(32.9)
1000
(39.4)
1640(64.6)
*1940(76.4)
Top View
1000
(39.4)
1500
(59.1)
900
(35.4)
1620(63.8)
4900(192.9)
*5500(216.5)
900
1500
885
260
900 1350(53.1) 973 1000(39.4)
322 (35.4)
(59.1)
(34.8) (10.2)
1420(55.9) 690(27.2)
(35.4) 3095(121.9) (38.3) (12.7)
3040(119.7)[stroke Down : 3145(123.8)]
3545(139.6)
450 3545(139.6)
(17.7)
1640(64.6)
*1940(76.4)
Unit : mm (inch)
880(3.9)
100(3.9) x 6 100
(3.9)
885
(34.8)
260
(10.2)
1129
(44.4)
750
(29.5)
Hydraulic unit
4(40.3)1024(40.3) 1426(56.1)
8(47.6)*1208(47.6)*1542(60.7)
.8)
2.9)
6.5)
std.
Front View
900
1500
885
260
(35.4)
(59.1)
(34.8) (10.2)
100(3.9)
250
3545(139.6) [stroke Down : 3145(123.8)]
(9.8)
1129
750
(29.5) (44.4)
LER
VM 750/750L (Half Cover)
Hydraulic unit
3545(139.6) [stroke Down : 3145(123.8)]
OLER
1600(63.0)
1800(70.9) (Stroke)
900(35.4)
900(35.4
1331(52
58
(2.3)
1900(74.8)
907 46
(35.7) (1.8)
1744(68.7)
629
(24.8)
1075
(42.3)
1000 1315(51.8)
(39.4)
1020
(40.2)
900 1350(53.1) 1085 210
3545 (42.7) (8.3)
(35.4)
(139.6)
Side View
3960(155.9)
907 46
(35.7) (1.8)
960(37.8) (Stroke)
750 1039
22 H8
960(37.8)
(Stroke)
960(37.8)
(Stroke)
750 1034
(29.5) (40.7)
620
(24.4)
960(37.8) (Stroke)
960(37.8) (Stroke)
750 1034
(29.5) (40.7)
620
(24.4)
16 24
(0.6)(0.9)
907 46
Cutting Range
(35.7) (1.8)
2400(94.5)
2400(94.5) (Stroke)
1200
Cutting Ran
22
1744(68.7)
Cutting Range
2111(83.1)
839(33.0) 839(33.0) 2111(83.1)
2600(102.4)
*1039(40.9) *1039(40.9)
22 H8
DETAIL T-SLOT
DETAIL T-SLOT
2400(94.5)
2400(94.5) (Stroke)
1200
960(37.8) (Stroke)
960(37.8) (Stroke)
750 1039
1025(40.4)
1025(40.4)
175 125(4.9)
x 6 100
175 125(4.9)
x 6 100
(6.9) (6.9)
(3.9) (3.9)
16 24
(0.6)(0.9)
16 24
(0.6)1025(40.4)
(0.9) 1025(40.4)
175 175
125(4.9)
x 6 100
125(4.9)
x 6 100
(6.9) (6.9)
(3.9) (3.9)
16 24
(0.6)(0.9)
16 24
1025(40.4)
1025(40.4)
(0.6)(0.9)
175 175
125(4.9)
x 6 100
125(4.9)
x 6 100
(6.9) (6.9)
(3.9) (3.9)
1075
(42.3)
1025(40.4)
2930(115.4)
175 125(4.9) x 6 100
(6.9)
(3.9)
960(37.8) (Stroke)
1020(40.2)
1447.5(57.0) 610
(24.0)
3060(120.5)
2000(78.7) (Stroke)
1000(39.4)
1000(39.4)
2600(102.4)
1025(40.4)
175 125(4.9) x 6 100
(6.9)
(3.9)
1020(40.2)
1447.5(57.0) 610
(24.0)
3060(120.5)
5061(199.3)
4510(177.6)
2525(99.4)
730 1255
(28.7) (49.4)
3960(155.9)
2400(94.5) (Stroke)
1200
DETAIL T-SLOT
DETAIL
DETAIL T-SLO
960(37.8) (Stroke)
3960(155.9)
629
(24.8)
DETAIL T-SLOT
16 24
(0.6)(0.9) 1025(40.4)
175 125(4.9) x 6 100
(6.9)
(3.9)
629
(24.8)
1744(68.7)
2400(94.5)
2600(102.4)
1895(74.6)
Cutting Range
22 H8
2111(83.1) 839(33.0) 839(33.0) 2111(83.1)
*1039(40.9)
2600(102.4)
22 H8 *1039(40.9)
Cutting Range
22 H8
16 24
(0.6)(0.9)
) 1744(68.7)
111(83.1)
6)
2528(99.5)*2928(115.3)
6016(236.9) *6416(252.6)
2000(78.7) (Stroke)
1000(39.4)
2400(94.5)1000(39.4)
(Stroke)
1200(47.2)
1200(47.2)
16 24
(0.6)(0.9)
1744(68.7)
2525(99.4)
3675(144.7)
Top View
3960(155.9)
2400(94.5)
629
(24.8)
2400(94.5)
2400(94.5) (Stroke)
Cutting Ran
1200
2000(78.7) (Stroke)
Cutting Range
DETAIL T-SLOT
1000(39.4)
1000(39.4)
22
907 46OIL COOLER
Hydraulic unit MAIN POWER INPUT HOLE (ø61)
22 H8 2
1744(68.7)
(35.7) (1.8)
(OPPSITE POSITION)
Cutting Range
601
960(37.8) (Stroke)
1000 1315(51.8)
(39.4)
610(24.0) 420 730
835 (16.5)(28.7)
(32.9)
1020
(40.2)
620
(24.4)
111(83.1)
2150(84.6)
1744(68.7)
DETAIL T-SLOT
22 H8
960(37.8) (Stroke)
960(37.8) (Stroke)
1895(74.6)
2528(99.5)*2928(115.3)
6016(236.9) *6416(252.6)
2600(102.4)
2400(94.5)
2400(94.5) (Stroke)
Cutting Range
1200(47.2)
1200(47.2)
2000(78.7) (Stroke)
Cutting Range
1000(39.4)
1000(39.4)
OIL COOLER
Hydraulic unit MAIN POWER INPUT HOLE (ø61) 2150(84.6) 22
22 H8
Cutting Range
(OPPSITE POSITION)
64
22 H8 1345(53.0) 1895(74.6)
1855
1345(53.0)
1855
DETA
(73.0)
*1545(60.8) *1545(60.8) (73.0)
DETAIL T-SLO
Cutting Range
2600(102.4)
960(37.8) (Stroke)
960(37.8) (Stroke)
Front View
* : VM 960L
opt.
2000(78.7) (Stroke)
1000(39.4)
1000(39.4)
DETAIL T
2400(94.5)
DETAIL T-SLOT
960(37.8) (Stroke)
960(37.8) (Stroke)
1075
(42.3)
2930(115.4)
VM 960/960L (Full Cover)
nit MAIN POWER INPUT HOLE (ø61)
1744(68.7)
(OPPSITE POSITION)
.3)
.6)
2525(99.4)
3675(144.7)
5314(209.2)
273
(10.7) 551
4705(185.2)
2725(107.3)
975
1005
(21.7)
(38.4) (39.6)
610(24.0) 420 730
835 (16.5)(28.7)
(32.9)
1025(40.4)
1315(51.8)
1020 1025(40.4)
1000
175 (39.4)
125(4.9) x 6 100
(40.2)
175(6.9)125(4.9) x 6 100
(3.9)
(6.9)
(3.9)
620
(24.4)
1855
2150(84.6)
1895(74.6)
73.0)
7)
2000(78.7) (Stroke)
1000(39.4)
1000(39.4)
1315(51.8)
1020 1000 1025(40.4)
1025(40.4)
(40.2) (39.4)
175 125(4.9) x 6 100
175 125(4.9) x(6.9)
6 100
(3.9)
(6.9)
(3.9)
2150(84.6)
2100(82.7)
*2500(98.4)
6400(252.0) *6800(267.7)
1025(40.4)
1025(40.4)
175 125(4.9) x 6 100
175 125(4.9)(6.9)
x 6 100
(3.9)
(6.9)
(3.9)
2150(84.6)
nit MAIN POWER INPUT HOLE (ø61)
(OPPSITE POSITION)
2525(99.4)
3675(144.7)
22 H8
2400(94.5) (Stroke)
Cutting Range
1200(47.2)
1200(47.2)
Cutting Range
2000(78.7) (Stroke)
2150(84.6) 22
1000(39.4)
1000(39.4)
OIL COOLER
Hydraulic unit
2264
H8
Cutting Range
1855
1345(53.0) 1345(53.0)
1855
(73.0)
*1545(60.8) *1545(60.8) (73.0)
DETA
22 H8
2600(102.4)
DETAIL T
2400(94.5)
610(24.0) 420 730
2525(99.4)
835 (16.5)(28.7) 3675(144.7)
2400(94.5) (Stroke)
(32.9)
1200(47.2)
1200(47.2)
1025(40.4)
175 125(4.9) x 6 100
(6.9)
(3.9)
2930(115.4)
Side View
1075
(42.3)
750 1034
750 1034
260
(40.7)
(29.5) (40.7) 900 1500(59.1) 885
900 1350(53.1) 1085 210(29.5) 900
1500(59.1)
885
260
(35.4) 3545(139.6) (34.8) (10.2)
3545 (42.7) (8.3) (35.4)
(35.4)
3545(139.6) (34.8) (10.2)
(139.6)
[stroke Down : 3145(123.8)]
[stroke Down : 3145(123.8)]
750 1039
1855
73.0)
610(24.0) 420 730
835 (16.5)(28.7)
(32.9)
Cutting Range
2000(78.7) (Stroke)
1000(39.4)
Hydraulic unit1000(39.4)
OIL COOLER
273
5061(199.3)
(10.7) 551
4510(177.6)
2525(99.4)
730 1255 (21.7)
(28.7) (49.4)
2150(84.6)
2100(82.7)
*2500(98.4)
6400(252.0) *6800(267.7)
1020(40.2)
1020(40.2)
1447.5(57.0) 610
1447.5(57.0) 610
(24.0)
900 1500(59.1) 885
260
(24.0)900 1350(53.1) 1085 210
900 1350(53.1) 1085 210
3060(120.5)
(35.4)
3545 (42.7) (8.3)
3545
(35.4)
(35.4)
(42.7)
(8.3)
3545(139.6) (34.8) (10.2)
3060(120.5)
(139.6)
(139.6)
[stroke Down : 3145(123.8)]
2150(84.6)
t
7.7)
Top View
273
5314(209.2)
(10.7) 609
4705(185.2)
(24.0)
2725(107.3)
975
1005
(38.4) (39.6)
750 1039
900 1500(59.1) 885
260
(35.4) 3545(139.6) (34.8) (10.2)
[stroke Down : 3145(123.8)]
Front View
Unit : mm (inch)
273
(10.7) 609
(24.0)
t
* : VM 960L
std.
2930(115.4)
VM 960/960L (Half Cover)
DETAIL T-SLOT
2600(102.4)
15
2
60
DETAIL
External Dimensions
VM 1260 (Full Cover) std.
Unit : mm (inch)
Front View
Top View
6938(273.1) (MAX. WIDTH)
918.3
(36.2)
45(1.8) 40(1.6)
45(1.8)
918.3
2524(99.4) (COVER TOP)
3930(154.7) (MAX. HEIGHT)
ø23(0.9)
30˚
ø38
(1.5)
240 160160160160160160150
ø25(1.0)
(9.4) (6.3)(6.3)(6.3)(6.3)(6.3)(6.3)(5.9)
1350(53.1)
ø25
(1.0)
ø17
(0.7)
45(1.8)
ø17
(0.7)
ø38
(1.5)
30˚
45˚
ø38
(1.5)
25.7
(1.0)
M24 x P3.0
ø25
(1.0)
45(1.8) 40(1.6)
45(1.8)
45˚
ø23(0.9)
45˚
30˚
ø38 ø17
(1.5) (0.7)
ø25
(1.0)
ø38
(1.5)
40(1.6)
M24 x P3.0
ø25 30
˚
(1.0)
ø23(0.9) ø17
(0.7)
M24 x P3.0
ø23(0.9)
45˚
16(0.6)
16(0.6)
40(1.6)
40(1.6)
ø23(0.9)
35.4
(1.4)
45˚
30˚
45˚
100
(3.9)
40(1.6)
35.4
(1.4)
45(1.8)
M24 x P3.0
ø25 30
˚
(1.0)
ø23(0.9) ø17
(0.7)
ø38
ø17
(1.5) (0.7)
ø25
(1.0)
ø38
(1.5)
25.7
(1.0)
25.7
(1.0)
35.4
(1.4)
MAS403P50T-II(60) opt.
40(1.6)
16
30˚
ø25
(1.0)
40(1.6)
M24 x P3.0
35.4
(1.4)
45˚
35.4
(1.4)
7/24 TAPER
M24 x P3.0
M24 x P3.0
60˚
15(0.6) 38(1.5)
101.8(4.0)
37(1.5)
37(1.5)
3(0.1)
T-slot section
T-slot section
25.7
(1.0)
ø17
(0.7)
ø38
(1.5)
101.8(4.0)
45(1.8)
T-slot section
640 704
(25.2)(27.7)
40(1.6)
M24 x P3.0
MAS403P50T-I(45) std.
35.4
(1.4)
22 H8
22 H8
ø25(1.0)
ø25(1.0)
ø69.85(2.8)
60˚
15(0.6) 38(1.5)
101.8(4.0)
3(0.1)
240 160160160160160160150
(9.4) (6.3)(6.3)(6.3)(6.3)(6.3)(6.3)(5.9)
1350(53.1)
3
ø100(3.9)0˚
ø23(0.9)
ø85(3.3)
918.3
(36.2)
30˚
40(1.6)
ø23(0.9)
ø17
(0.7)
ø25
(1.0)
15(0.6)
ø85(3.3)
ø80(3.1)
ø69.85(2.8)
ø100(3.9)
ø85(3.3)
ø80(3.1)
ø100(3.9)
ø38
(1.5)
60˚
38(1.5)
3(0.1)
2800(110.2)
100
3000(118.1)
(3.9)
100
2800(110.2)
(3.9)
3000(118.1)
100
(3.9)
40(1.6) 45(1.8)
F.L
(MAX.
SIZE) std.
F.L
994
4500(177.2)
(COOLANTF.LTANK LENGTH) F.L
824(111.2) (MAX.2824(111.2)
DOOR OPEN6800(267.7)
SIZE) DOOR OPEN
MAS403P
BT
50
994 4500(177.2)
(COOLANT
TANK
LENGTH)
35.4
35.4
(39.1)
01.8(4.0) 6800(267.7)
23.2(0.9) (OPTION)
CHIP CONVEYOR (OPTION)
(39.1)
(1.4)WAGON
(1.4)
CHIP CONVEYOR
CHIP
(OPTION)
23.2(0.9)
CHIP WAGON (OPTION)
500 Liter (132.1
galon)
TAPER
500 Liter (132.1 galon)
TAPER
GAGE LINE
7/24 TAPER
15(0.6)
GAGE LINE
7/24 TAPER
15(0.6)
M24 x P3.0
M24 x P3.0
45˚
TAPER
GAGE LINE
45˚
ø25
(1.0)
25.7
(1.0)
ø38
(1.5)
3735
T-slot section
M24 x P3.0
23.2(0.9)
15(0.6)
ø69.85(2.8)
ø17
(0.7)
3735
40(1.6)
2524(99.4) (COVER TOP)
918.3
(36.2)3930(154.7) (MAX. HEIGHT)
BT50
OPERATING BOX
F.L
2824(111.2) (MAX. DOOR OPEN SIZE)
2824(111.2) (MAX. DOOR OPEN SIZE) 6800(267.7)F.L
994 4500(177.2) (
6800(267.7)
CHIP WAGON(39.1)
(OPTION)
2800(110.2)
100
CHIP WAGON (OPTION)
500 Liter (132.1 galon) CHIP CON
(3.9)
3000(118.1)
500 Liter (132.1 galon)
100
(3.9)
ø80(3.1)
1190
(46.9)
918.3
(36.2)
2524(99.4) (COVER TOP)
3930(154.7) (MAX. HEIGHT)
ø25(1.0)
3735(147.0)
Tool Shank
240 160160160160160160150
(9.4) (6.3)(6.3)(6.3)(6.3)(6.3)(6.3)(5.9)
1350(53.1)
3735(147.0)
1213
(47.8)
16(0.6)
3450(135.8)
3450(135.8)
852
6080(239.4)(MAX. LENGTH) (33.5)
1192
(46.9)
OPERATINGBOX
BOX
OPERATING
345
1190
(46.9)
Side View
1192
(46.9)
37(1.5)
16(0.6)
22 H8
OPERATING BOX
OPERATING BOX
22 H8
6938(273.1)
(MAX.
WIDTH)
1192
3450(135.8)
6938(273.1) (MAX. WIDTH)
1192
3450(135.8)
1213 640 704 1213
(46.9)
F.L
640 F.L704
OR OPEN SIZE)
(46.9) TANK LENGTH)
(47.8)(25.2)(27.7) (47.8)
994 4500(177.2) (COOLANT
(25.2)(27.7)
)
(39.1)
LINE
7/24WAGON
TAPER (OPTION)
CHIP
OPERATING BOX CHIP CONVEYOR (OPTION)
OPERATING
500 Liter (132.1
galon) BOX
M24 x P3.0
M24 37(1.5)
x P3.0
35.4
(1.4)
2800(110.2)
3000(118.1)
100
(3.9)
3735(147.0)
3735
2524(99.4) (COVER TOP)
3930(154.7) (MAX. HEIGHT)
3735(147.0)
CONTROL TANK
3735(147.0)
OPERATING BOX
CONTROL BOX
Hydraulic
OIL COOLER
F.L
CONTROL BOX
2824(111.2)
(MAX. DOOR
OPENunit
SIZE)OIL PAN
994 4500(177.2) (COOLANT TANK LENGTH) F.L
unit 6800(267.7)
OIL COOLER Hydraulic
CONTROL BOX
6938(273.1) (MAX. WIDTH)
OIL PAN
(39.1)
CHIP CONVEYOR
(OPTION)
CONTROL TANK
6938(273.1)
(MAX.
WIDTH)
CHIP WAGON (OPTION)
CONTROL
TANK galon)
500 Liter (132.1
2524(99.4) (COVER TOP)
3930(154.7) (MAX. HEIGHT)
WIDTH)
640 704
(25.2)(27.7)
OPERATING BOX
3735
X
1192 OIL COOLER
3450(135.8)
1213
Hydraulic unit
OIL PAN
(46.9)
(47.8)
3450(135.8)
852
6080(239.4)(MAX. LENGTH) (33.5)
1190
(46.9)
3450(135.8)
852
6080(239.4)(MAX. LENGTH) (33.5)
CONTROL TANK
1190
3450(135.8)
852
918.3
(46.9) 40(1.6)
6080(239.4)(MAX. LENGTH) (33.5)
(36.2)
2524(99.4) (COVER TOP)
3930(154.7) (MAX. HEIGHT)
CONTROL BOX
45(1.8)
40
1640(64.6)
*1940(76.4)
1600(63.0) *1900(74.8)
12 22
(0.5)(0.9)
25 750(29.5) 25
(1.0) (Stroke) (1.0)
880(34.6)
100(3.9) x 6 100
(3.9)
180
(7.1)
1000(39.4)
1420(55.9) 690(27.2)
3040(119.7)
2830(111.4)
260
(10.2
900
(35.4)
1500
(59.1)
885
(34.8)
3545(139.6) [stroke Down : 3145(123.8)]
DETAIL T-SLOT
610(24.0) 420 730
2265(89.2)
835 (16.5)(28.7) 3415(134.4)
(32.9)
Table
Unit : mm (inch)
T-slot section
2600(102.4)
12 22
(0.5)(0.9)
16 24
(0.6)(0.9)
25 750(29.5) 25
960(37.8)
(1.0) (Stroke)
(Stroke) (1.0)
1900(74.8)
12 22
16 24 (0.5)(0.9)
(0.6)(0.9)
DETAIL T-SLOT
2400(94.5)
1800(70.9) (Stroke)
Cutting Range
900(35.4)
900(35.4)
18 H8
2400(94.5) (Stroke)
Cutting Range
1200(47.2)
1200(47.2)
25 750(29.5) 25
960(37.8)
(Stroke) (1.0)
(1.0) (Stroke)
22 H8
DETAIL T-SLOT
DETAIL T-SLOT
2600(102.4)
opt.
Cutting Range
22 H8
DETAIL T-SLOT
2400(94.5)
2400(94.5) (Stroke)
1200
Cutting Range
22 H8
16 24
(0.6)(0.9)
1025(40.4)
1025(40.4)
880(3.9)
880(34.6)
175 125(4.9)
x 6 100x 6 100 175 125(4.9)
x 6 100x 6 100
180 100(3.9)
180 100(3.9)
(6.9) (7.1)
(3.9) (3.9) (6.9) (7.1)
(3.9) (3.9)
DETAIL T-SLOT
960(37.8) (Stroke)
DETAIL T-SLOT
907 46
(35.7) (1.8)
22 H8
960(37.8) (Stroke)
16 24
(0.6)(0.9)
22 H8
3960(155.9)
DETAIL T-SLOT
2600(102.4)
Cutting Range
16 24
(0.6)(0.9)
22 H8
240 160160160160160160150
(9.4) (6.3)(6.3)(6.3)(6.3)(6.3)(6.3)(5.9)
1350(53.1)
960(37.8) (Stroke)
DETAIL T-SLOT
100
(3.9)
Cutting Range
22 H8
16 24
(0.6)(0.9)
37(1.5)
16(0.6)
2400(94.5)
2800(110.2)
3000(118.1)
2400(94.5) (Stroke)
1200
22 H8
1025(40.4)
175 125(4.9) x 6 100
(6.9)
(3.9)
750(29.5) 25
(Stroke) (1.0)
1000(39.4)
40(1.6)
1025(40.4)
175 125(4.9) x 6 100
(6.9)
(3.9)
3735
Cutting
Range
DETAIL
T-SLOT
2600(102.4)
1000(39.4)
1025(40.4)
175 125(4.9) x 6 100
(6.9)
(3.9)
1075
(42.3)
DETAIL
18 H8 T-SLOT
1075
(42.3)
1020
(40.2)
2400(94.5) (Stroke)
1200(47.2)
1200(47.2)
1900(74.8)
1744(68.7)
629
(24.8)
100
(3.9)
F.L
TANK
907 LENGTH)
46
OPTION)
(35.7) (1.8)
Cutting Range
12 22
(0.5)(0.9)
2400(94.5)
1600(63.0)
2000(78.7) (Stroke)
1000(39.4)
1000(39.4)
Cutting Range
DETAIL T-SLOT
22 H8
16 24
(0.6)(0.9)
1800(70.9) (Stroke)
900(35.4)
900(35.4)
Cutting Range
1500(59.1) (Stroke)
750(29.5) 750(29.5)
Cutting Range
2000(78.7) (Stroke)
18 H8
1000(39.4)
1000(39.4)
VM 960/960L (Full Cover)
18 H8
25
(1.0)
(Stroke)
25 750(29.5) 960(37.8)
25
(1.0) (Stroke) (1.0)
960(37.8) (Stroke)
1600(63.0)
1000 1315(51.8)
(39.4)
880(3.9)
880(34.6)
1025(40.4) 180 100(3.9)
x 6 1001025(40.4)180 100(3.9) x 6 100
175 125(4.9) x 6(7.1)
100
175(3.9)
125(4.9) x 6(7.1)100
(3.9)
(6.9)
(3.9)
(6.9)
(3.9)
40 (42.1) 3505(138.0)
1020(40.2)
(1.6)
1447.5(57.0) 610
(24.0)
3060(120.5)
2000(78.7) (Stroke)
1000(39.4)
1000(39.4)
std.
opt.
16 24
(0.6)(0.9)
Cutting Range
12 22
(0.5)(0.9)
1500(59.1) (Stroke)
std.
VM 1260 (Full Cover)
2000(78.7) (Stroke)
1213
(47.8)
DETAIL T-SLOT
3185(125.4)
418
420 730
2525(99.4)
(16.5) 879
570 610(24.0)(16.5)
3649(143.7)
(28.7)
835
3675(144.7)
(22.4)
(34.6)
(32.9) 5095(200.6)
750(29.5)
750(29.5)
VM 960/960L
(Half
Cover)
2528(99.5)*2928(115.3)
6016(236.9) *6416(252.6)
12 22
(0.5)(0.9)
25 750(29.5) 25
(1.0) (Stroke) (1.0)
2930(115.4)
1600(63.0) *1900(74.8)
144
(5.7)
960(37.8) (Stroke)
2348(92.4) 1331(52.4)
2150(84.6)
2100(82.7)
58
5010(197.2)
*2500(98.4)
(2.3)
5126(201.8)
6400(252.0) *6800(267.7)
900 1500(59.1) 885
260
(35.4) 3545(139.6) (34.8) (10.2)
[stroke Down : 3145(123.8)]
1000
(39.4)
1420(55.9) 690(27.2)
3040(119.7)
900 1350(53.1)880(34.6)
973 322
(35.4) 3095(121.9)
(38.3)x (12.7)
6 100
180 100(3.9)
(7.1)
(3.9)
3545(139.6)
450
(17.7)
4862(191.4)
1500(59.1) *1800(70.9)(Stroke) Cutting Range
3384(133.2)
750(29.5) 750(29.5)
*900(35.4) *900(35.4)
18 H8
1070
2130(83.9)
1020(40.2)
(42.1) 3505(138.0)
40
1447.5(57.0) 610
(1.6)
(24.0)
3060(120.5)
2115(83.3)
Open
850(33.5)
1050(41.3)
VM 750/750L (Full Cover)
std. * : VM 750L
1025(40.4)
175 125(4.9) x 6 100
(6.9)
(3.9)
VM 750/750L (Half Cover)
900 1350(53.1) 1085 210
3545 (42.7) (8.3)
(35.4)
(139.6)
63.8)
192.9)
216.5)
1500(59.1) *1800(70.9)(Stroke) Cutting Range
750(29.5) 750(29.5)
*900(35.4) *900(35.4)
18 H8
DETAIL T-SLOT
17
Machine Specifications
Features
Travels
Unit
X-axis
Y-axis
Z-axis
mm (inch)
mm (inch)
mm (inch)
Distance from spindle nose to table top
mm (inch)
Distance from spindle center to column guideway mm (inch)
Rapid traverse rate (X / Y / Z)
m/min
(ipm)
Feedrate
Cutting feedrate
m/min (ipm)
Table size
mm (in.)
Table
Table loading capacity
Table surface
Max. spindle speed
Spindle Spindle taper
Max. spindle torque
Type of tool shank
Tool storage capacity
Max. tool diameter
Max. tool diameter without adjacent tools
Max. tool length
ATC
Max. tool weight
Method of tool selection
Tool change time (tool-to-tool)
Tool change time (chip-to-chip)
kg (lb)
VM 750
VM 750L
VM 960
200-1000 (7.9-39.4)
865 (34.1)
20/20/20
(787.4/787.4/787.4)
10000
1600 x 800
1900 x 800
(63 x 31.5)
(74.8 x 31.5)
3000 (6613.8) 3500 (7716.1)
7-100 x 18H8
1005 (39.6)
16/16/16
(629.9/629.9/629.9)
8000
2400 x 950
2600 x 950
(94.5 x 37.4)
(102.4 x 37.4)
4000 (8818.4) 4500 (9920.7)
7-125 x 22H8
6000 {8000, 12000}
ISO#50 7/24 Taper
561.5 (414.4)
MAS403 BT50
30
30 {40}
ø125 (4.9)
ø230 (9.1)
350 (13.8)
15 (33.1)
Memory Random
2.5
6
8
18.5 (24.8)
{22 / 26 / 30 (29.5 / 34.9 / 40.2)}
r/min
N.m (ft-lbs)
ea
mm (in.)
mm (in.)
mm (in.)
kg (lb)
s
s
Spindle motor (30min)
kW (Hp)
Feed motor (X / Y / Z)
kW (Hp)
7 / 7 / 7 (9.4 / 9.4 / 9.4)
Electric power supply (Rated Capacity)
Compressed air supply
Coolant
tank capacity
Tank
capacity Lubrication tank capacity
Height
kVA
Mpa (psi)
L (galon)
L (galon)
mm (in.)
60 {75}
Machine Dimension (L x W)
size
mm (in.)
Weight
kg (lb)
Motors
Power
source
VM 960L
1500 (59.1)
1800 (70.9)
2000 (78.7)
2400 (94.5)
750 (29.5)
960 (37.8)
800 (31.5)
VM 1260
2500 (98.4)
1260 (49.6)
900 (35.4)
200-1100
(7.9-43.3)
1320 (52)
12/12/12
(472.4/472.4/472.4)
6000
2800 x 1260
(110.2 x 49.6)
8000 (17636.7)
7-160 x 22H8
668.4 (493.3)
40
22 (29.5)
9 / 9 / 7 (12.1 / 12.1 / 9.4)
{26/30 (34.9/40.2)}
65 {73}
0.54 (78.3)
480 (126.8)
800 (211.4)
3.1 (0.8)
3545 (139.6)
5138 x 6800
5138 x 6400
4927 x 5500
4927 x 4900
(194.0 x 192.9) (194.0 x 216.5) (202.3 x 252.0) (202.3 x 267.7)
{5392 x 6416
{5392 x 6016
{5126 x 5126
{5126 x 4766
(201.8 x 187.6)} (201.8 x 201.8)} (212.3 x 236.9)} (212.3 x 252.6)}
14000 (30864) 14800 (32628) 20000 (44092) 21000 (46297)
3930 (154.7)
5645 x 6938
(222.2 x 273.1)
31000 (68343)
Note : { } are optional.
Standard Feature
Optional Feature
• Assembly & operation tools
• Installation parts
• 4th axis preparation
• Electric power transformer
• Automatic power off
• Portable 3MPG
• Automatic front door
• Oil skimmer
• Coolant tank & chip conveyor ready • Screw conveyor
• Automatic measuring system • Shower coolant
• Doosan smart thermal control
• Signal tower (red, yellow, green)
• Automatic tool length
measurement with sensor
• Fanuc 31i-A controller
• Spindle head cooling system
• Chip conveyor
• Full enclosure splash guard
• Work light
• Chip bucket
• The specifications and information above-mentioned may be changed without prior notice.
• For more details, please contact Doosan
18
• Test bar
• Through spindle coolant
• Rotary table
ø320mm (12.6 inch) (VM 750/750L)
ø500mm (19.7 inch) (VM 960/960L/1260)
NC Unit Specifications
Fanuc 31i
AXES CONTROL
TOOL FUNCTION
- Controlled axes
3 (X,Y,Z)
- Tool nose radius compensation
- Simultaneously controllable axes
Positioning (G00) / Linear interpolation (G01) : 3 axes
Circular interpolation (G02, G03) : 2 axes
- Number of tool offsets
- Backlash compensation
- Tool life management
- Emergency stop / overtravel
G40, G41, G42
64 ea
- Tool length compensation
G43, G44, G49
- Tool number command T2 digits
- Least command increment
0.001mm / 0.0001"
- Least input increment
0.001mm / 0.0001"
- Machine lock
all axes / Z axis
- Mirror image
Reverse axis movement (setting screen and M - function)
- Operation functions
Tape / Memory / MDI / Manual
- Operation history display
- Program restart
- Run hour and part number display
Geometry / Wear and Length / Radius offset memory
- Follow up
- Memory card interface
- Search function
Sequence NO. / Program NO.
- Tool offset memory C
- Self - diagnostic function
- Tool length measurement
- Servo setting screen
- Single block
- External data input
PROGRAMMING & EDITING FUNCTION
- Absolute/Incremental programming
G90 / G91
- Multi language display
- Stored pitch error compensation
Pitch error offset compensation for each axis
- Auto. Coordinate system setting
- Stored stroke check 1
- Circular interpolation by radius programming
- 3-dimensional coordinate conversion
- Custom macro B
- 3-dimensional tool compensation
- Custom size 512Kb
- 3rd / 4th reference return
Overtravel controlled by software
INTERPOLATION & FEED FUNCTION
- 2nd reference point return
G30
- Circular interpolation
G02, G03
- Dwell
G04
- Exact stop check
G09, G61
- Feed per minute
mm / min
- Feedrate override
0 - 200 %
- Jog override
0 - 200 %
- Linear interpolation
G01
- Manual handle feed 1 unit
0.1/0.01/0.001mm
- Override cancel
M48 / M49
- Positioning
- Rapid traverse override
G73, G74, G76, G80 - G89, G99
- Decimal point input
G00
F0 (fine feed), 25 / 50 / 100 %
- Reference point return
G27, G28, G29
- Skip function
G31
- Helical interpolation
- DSQ1(AICC II + Machine condition selection function)
200 block preview
- Thread cutting, synchronous cutting
RS - 232C
- Inch / metric conversion
- Local / Machine coordinate system
1024 pairs
G20 / G21
- Additional controlled axes
G52 / G53
- Additional work coordinate system
G54.1 P1 - 300 (300 pairs)
- Label skip
200 block preview (AICC II + Machine condition
±99999.999mm (±9999.9999 inch)
- No. of Registered programs
- Optional stop
selection function + Data server + 1GB)
500 ea
M01
640 m
- Program number
max. 6 axes in total
- DSQ 2
- Maximum commandable value
O4-digits
- DSQ 3
600 block preview
(AICC II with High speed processing + Machine condition
selection function + Data server + 1GB)
- Program protec
- Automatic corner override
- Program stop / end
- Chopping function
G81.1
- Cylindrical interpolation
G07.1
M00 / M02, M30
- Programmable data input
Tool offset and work offset are entered by G10, G11
- Sub program
Up to 4 nesting
- Tape code
ISO / EIA Automatic discrimination
- Work coordinate system
G54 - G59
- Additional work coordinate system (48 Pair)
G54.1 P1 - 48 pairs
- Coordinate system rotation
- Program restart
OPTIONAL SPECIFICATIONS
- Addition of tool pairs for tool life management
- I / O interface
- Part program storage
- Manual handle feed 2 / 3 unit
- Manual handle feedrate
- Canned cycle
G68, G69
G62
- Dynamic graphic displayMachining profile drawing
- Exponential interpolation
- Interpolation type pitch error compensation
- EZ Guide i
(Doosan infracore Conversational Programming Solution)
with 10.4" Color TFT LCD
- Increment system 1 / 10
- Automatic corner deceleration (Specify AI Contour control II)
- Extended part program editing
- Figure copying
- Feedrate clamp by circular acceleration
- Optional angle chamfering / corner R
- High speed skip function
- Linear ACC / DEC before interpolation
(Specify AI Contour control II)
- Macro executor
- Involute interpolation
- Linear ACC / DEC after interpolation
G72.1, G72.2
G02.2, G03.2
- Machining time stamp function
OTHERS FUNCTIONS (Operation, Setting & Display, etc)
- No. of Registered programs
- Control axis detach
- Alarm display
- Rapid traverse bell-shaped acceleration / deceleration
- Alarm history display
- Number of tool offsets
99 / 200 / 400 / 499 / 999 / 2000 ea
- Smooth backlash compensation
- Clock function
- Optional block skip addition
- Part program storage
- Cycle start / Feed hold
- M-code function
Message display when PMC alarm occurred
M3 digits
9 blocks
1280 / 2560 m
- Playback function
- Display of PMC alarm message
SPINDLE & M-CODE FUNCTION
1000 ea
- Polar coordinate command
G15 / G16
- Spindle orientation
- Dry run
- Polar coordinate interpolation
G12.1 / G13.1
- Spindle serial output
- Ethernet function(Embeded)
- Programmable mirror image
G50.1 / G51.1
- Graphic display
- Single direction positioning
G60
- Spindle speed command S5 digits
Tool path drawing
- Help function)
- Stored stroke check 2 / 3
- Spindle output switching
- Loadmeter display
- Tool load monitoring function (doosan)
- Retraction for rigid tapping
- MDI / DISPLAY unit
- Tool position offset
- Spindle speed override (10% increments)
- Rigid tapping
10 - 150 %
G84, G74
10.4" Color TFT LCD, Keyboard for data input, soft-keys
G45 - G48
- Position switch
19
http://www.doosaninfracore.com/machinetools/
Head Office
Doosan Tower 20th FL., 18-12, Euljiro-6Ga, Jung-Gu, Seoul, Korea 100-730
Tel : ++82-2-3398-8693 / 8671 / 8680 Fax : ++82-2-3398-8699
Doosan Infracore America Corp.
19A Chapin Rd. Pine Brook, NJ 07058, U.S.A.
Tel : ++1-973-618-2500 Fax : ++1-973-618-2501
Doosan Infracore Germany GmbH
Emdener Strasse 24 D-41540 Dormagen Germany
Tel : ++49-2133-5067-100 Fax : ++49-2133-5067-001
Doosan Infracore Yantai Co., LTD
13 Building, 140 Tianlin Road, Xuhui District, Shanghai, China (200233)
Tel : ++86-21-6440-3384 (808, 805) Fax : ++86-21-6440-3389
EN 140829SU
- The specifications and information above-mentioned may be changed without prior notice.
- For more details, please contact Doosan.