Bianchi online brochure

2012 bianchi duty gear catalog
104
safariland.com 800.347.1200
ARMOR
BIANCHI
FIREARMS ACCESSORIES
WORLD’S FINEST GUNLEATHER
DUTY GEAR
DUTY GEAR
Recognized by shooting enthusiasts and professionals the world over, the
Bianchi® hallmarks of handcrafted workmanship, innovative, yet functional
design and quality are just as strong today as they were more than 50 years ago.
From the early days in 1958 when John Bianchi built his first leather holster in his
garage to present day, the focus remains on providing our customers with the
best combination of innovation and handcrafted, time-tested designs.
PROTECTIVE GEAR
Today, with the Bianchi brand, we remain as dedicated as ever to our constant
pursuit of excellence and creativity in our products. Whether it’s the classic
line of top quality full grain leather holsters, or our state of the art AccuMold®
synthetic holsters and accessories, the Bianchi brand offers the best value in a
quality product.
105
TRAINING GROUP
bianchi-intl.com bianchicowboy.com
BIANCHI COWBOY
106
108
109
122
126
136
138
ARMOR SYSTEMS
Officer Andrew Taylor
Los Angeles Police Department
FORENSICS
officers, including Officer Andrew Taylor, responded
to a possible assault with a deadly weapon call at a
residence. The officers assessed the situation upon
arrival and decided to transport one of three detainees
separately as he was more verbally abusive than the other
two counterparts. Officer Taylor escorted the detainee
outside of the apartment into the building's hallway. As
they headed for the stairwell, the suspect produced a .357 magnum handgun from a rear
pocket and began firing at Officer Taylor. The first round struck Officer Taylor's sidearm,
shattering the handle of the gun. A second round hit Officer Taylor's lower chest, but
was stopped by his bullet-resistant vest. A third round struck his badge and deflected
INTRODUCTION
up, while a fourth round struck him in the upper right portion of his chest, missing his vest
DUTY HOLSTERS
and causing a straight-through wound. The four shots and struggle took only seconds.
As his own weapon had been rendered useless, Taylor lunged at the suspect inan
DUTY BELTS & ACCESSORIES
attempt to disarm him. Suffering from the pain of three shots to the chest, Officer Taylor
MILITARY
continued to wrestle with the suspect until fellow officers were able to come to his aid.
The officers shot and killed the suspect. Officer Taylor was transported by ambulance
to
CONCEALMENT
Cedars Sinai Medical Center where he was kept overnight for observation and released
Sporting
the next day. Officer Taylor returned to full duty two months after the incident.
LESS LETHAL
SAVE 997 On the evening of January 21, 2007,
BIANCHI BRAND GUIDE
®
AccuMold
®
safariland.com 800.347.1200
A state-of-the art molded synthetic nylon product
constructed from our trilaminate material, made up
of a ballistic weave outer fabric, a firm, high-density
closed-cell foam center; and a smooth Coptex™ lining.
All AccuMold gear is contour molded to precisely fit the
gear it was designed to carry.
106
Bianchi Leather
AccuMold Elite™
®
We’ve taken our patented AccuMold technology and
dressed it up. The AccuMold Elite line offers the same
construction of AccuMold, but with a Duraskin™ outer
material that looks amazingly like leather. You can’t tell
the difference until you pick it up and see that it’s almost
half the weight of leather.
Many people love traditional leather. It wears beautifully, and nothing quite smells
or feels the same. Bianchi leather is full grain cowhide – the best available. We
choose different weights based on the product requirements, handcrafting and
molding it to perfection the old-fashioned way, by not cutting corners.
PatrolTek™
PatrolTek duty belts and accessories are made using
our molded trilaminate technology but at a price to meet
the demands of ever-tightening budgets. Now you don’t
have to give up function and wear to get duty gear at a
great price.
AccuMold
Ballistic
Weave
PATROLTEK
AccuMold Elite
600-Denier
Woven
Duraskin™
PLAIN
ARMOR
BIANCHI FINISHES GUIDE
LEATHER
Duraskin™
BASKET
Duraskin™
Hi Gloss
Plain Tan
Plain Black
BIANCHI
DUTY GEAR
BIANCHI TECHNOLOGY
Pinch Retention
Device – PRD
FingerLok
Retention
™
®
Our exclusive PRD is formed of a high
strength polymer. When the weapon
is firmly seated in the holster, the PRD
grips the trigger guard, holding the
weapon in place until you’re ready
to draw.
The FingerLok™ device provides
Auto Retention™ when the weapon is
holstered, and is released by sweeping
the device with the middle finger when
drawing. PATENTED
FIREARMS ACCESSORIES
™
PROTECTIVE GEAR
™
Bianchi ErgoTek™ duty belts redistribute the weight of the duty gear, away
from the edges of the belt and over its wide closed-cell foam cushioned
surface. For even more stability and added holster support, a high-density
internal polymer stiffener runs the full length and width of belt. You’ll notice
immediately that the ErgoTek belt is both light in weight and far more
comfortable than a traditional duty belt. Plus, these belts are lined with
hook to work in conjunction with the Bianchi 7205 Liner Belt. PATENTED
Dual Belt Loop
Bianchi offers its most popular duty accessories with a uniquely
designed belt loop that allows for snug carry on either a 2" (50 mm)
duty belt or 2.25" (58 mm) duty belt. This feature is available on both
our top end AccuMold® & AccuMold® Elite™ accessory lines, as well
as our PatrolTek™ accessory line.
FORENSICS
Allusion™
Bianchi innovation continues with our newest product line, the
Allusion series. These holsters combine the best of leather with
the finest features of a synthetic liner for good looks and optimum
performance.
LESS LETHAL
ErgoTek Duty Belts
125 Consent™
ARMOR SYSTEMS
Premium grade, vegetable tanned cowhide has an unmistakable
look and feel, and ages beautifully. Our hand rubbed natural oil
finish gives it that distinctive leather scent. These timeless luxuries
combined with the benefit of a sturdy, thermal-molded synthetic
offers increased rigidity and a quick, seamless draw. It also allows
us to build in formed features such as the retention detent in the
trigger guard area providing enhanced handgun security. The
Bianchi Allusion series is the perfect combination of traditional
quality and cutting edge technology.
bianchi-intl.com bianchicowboy.com
107
TRAINING GROUP
ALLUSION
DUTY HOLSTERS
7105 Cruiser
™
Duty Holster
•A hi-ride duty holster that
positions pistol close to the body
•Top-draw design
safariland.com 800.347.1200
•Made with 50% greater density
foam than standard civilian
AccuMold holsters, for firmness
and strength
108
7920 Defender
®
PATENTED
•Internal Pinch® retention device
grips the pistol’s trigger guard
Duty Holster
PATENTED
•Top-draw holster with mid-ride
and traditional metal reinforced
thumb snap closure
•Unique Coptex™ inner lining helps
protect gun finish and provides a
smooth draw
•Quick-Slide™ injection-molded belt
loop fits up to 2.25" (58 mm) belts
•Pinch® Retention Device (PRD™)
enhances firearm retention by
gripping the pistol’s trigger guard
•Metal reinforced 2.25" (58 mm) jacket
slot belt loop, curved for comfort
•Available in Black Ballistic Weave
finish
II Duty Holster
•Contour molded, trilaminate
construction with 50% greater
density foam than civilian
AccuMold® holsters
®
•Unique Coptex™ inner lining helps
protect gun finish and provides a
smooth draw
PATENTED
•Top draw holster with mid-ride
carry and metal reinforced thumb
snap closure
7120 Defender
7115 Vanguard
™
•Soft Coptex™ poly-knit inner lining
•Metal reinforced 2.25" (58 mm)
jacket slot belt loop, curved for
comfort
•Available in Plain Black,
Basketweave Black and Hi Gloss
Duraskin™ finish
•Available in Black Ballistic Weave
finish
PATENTED
Duty Holster
•Contour molded, trilaminate
construction with 50% greater
density foam than civilian
AccuMold® holsters
•Molded internal Tension™ Strips
•Straight drop duty holster with
mid-ride and top draw
•Metal reinforced thumb snap
closure
•Soft Coptex™ poly-knit inner lining
•Metal reinforced 2.25" (58 mm)
jacket slot belt loop, curved for
comfort
•Available in Black Ballistic Weave
finish
•Four-part laminate for long-lasting shape and
exceptional durability
PATENTED
Sam Browne Belt
2.25" (58 mm)
™
7970 B uckleless
™
2.25" (58 mm)
Duty Belt
•Four-part laminate construction
•Hook and loop closure for quick on/off ease
•Load support cushions on belt lining spread
weight of gear over entire waist
•Closed-cell foam for support and comfort
•Firm polyethylene center strip sandwiched
between a high-density foam, then ballistic
weave outer and a durable nylon lining
•Provides a padded buffer between stiff outer
belt with accessories and the wearer
7960 Sam Browne Belt 2.25" (58 mm)
•Adjustable in ½" increments
•Duraskin™ exterior with loop liner for use with
Bianchi® 7205 Liner Belt
7980 Duty Belt 2" (50 mm)
•High-density four-part laminate for long-lasting
shape and exceptional durability
•Four-part laminate for long-lasting shape and
exceptional durability
•Four-part laminate construction for extra
durability
•Firm polyethylene center strip sandwiched
between a high-density foam, with ballistic
weave outer and a durable nylon lining
•Closed-cell foam for support and comfort
•Duraskin™ exterior with loop lining for use with
Bianchi® 7205 Liner Belt
•Shatter-resistant polymer buckle
•Duraskin exterior with loop lining for use with
Bianchi® 7205 Liner Belt
™
•Tri-Release™ shatter-resistant, polymer buckle
features 3-point release for added security
PROTECTIVE GEAR
7202 Gun Belt 1.75" (45 mm)
•Positive 3-way retention using hook and loop,
retaining stud and belt keeper
FIREARMS ACCESSORIES
•Accepts standard holster and pouches
•Duraskin™ exterior with loop lining for use with
Bianchi® 7205 Liner Belt
BIANCHI
1.75" (45 mm)
7965 E rgoTek
DUTY GEAR
7201 Training, Hook and Loop Belt
ARMOR
DUTY BELTS
LESS LETHAL
7210 Duty Belt 2" (50 mm)
•Five-part laminate for extra durability
•Tri-Release™ shatter-resistant, polymer buckle
features 3-point release for added security
•Five-part laminate construction for long
lasting shape and extra durability
•Duraskin™ exterior with loop lining for use with
Bianchi® 7205 Liner Belt
•Ballistic weave fabric outer and loop lining,
with foam center, and a stiffener sandwiched
between two layers of closed-cell foam for
support and comfort
•Closed-cell foam for support and comfort
•Tri-Release™ shatter-resistant, polymer buckle
features 3-point release for added security
8106 Liner Belt – Loop 1.5" (38 mm)
•Coplok™ shatter-resistant, polymer buckle
features 3-point release for added security
ARMOR SYSTEMS
8105 Liner Belt – Hook 1.5" (38 mm)
7200 Duty Belt 2.25" (58 mm)
•Four-part laminate for long-lasting shape and
exceptional durability
7205 Liner Belt 1.5" (38 mm)
•Loop surface for use with 7203 Duty Belt
•Hook and loop closure for quick on/off ease
•Tough web construction
•Tough web construction
•Lined with hook
•Hook and loop closure for quick on/off ease
•Hook and loop closure for quick on/off ease
109
TRAINING GROUP
•Hook surface for use with 8100 Duty Belt
bianchi-intl.com bianchicowboy.com
FORENSICS
•Ballistic weave fabric outer and loop lining,
with foam center, and a stiffener sandwiched
between two layers of closed-cell foam for
support and comfort
7950 Duty Belt 2.25" (58 mm)
PATENTED
7225 ErgoTek
™
Duty Belt 2.25" (58 mm)
8100 Web Belt 2" (50 mm)
•Five-part laminate for extra durability
•Loop lined for use with 8105 Liner Belt
•Load support cushions on inner lining distribute
weight of duty belt over entire waist for
comfort during the entire shift
•Tough, double-layered web construction
•Ballistic weave fabric with loop lining for use
with Bianchi® 7205 Liner Belt
•Smooth, edge-bound finish for extra comfort
•Tri-Release™ shatter-resistant polymer buckle
with 3-point release
7220 Duty Belt 2" (50 mm)
•Ballistic weave nylon with full-length hook
lining
•Both ends are skived, allowing a lower profile
around the buckle
•Coplok™ shatter-resistant, polymer buckle
features 3-point release for added security
•Accepts standard holsters and pouches
•Coplok™ shatter-resistant, polymer buckle
features 3-point release for added security
7955 ErgoTek
™
PATENTED
Duty Belt 2.25" (58 mm)
•Four-part laminate for long-lasting shape and
exceptional durability
•Duraskin™ exterior with loop lining for use with
Bianchi® 7205 Liner Belt
•Load support cushions on inner lining spread
load of duty belt over entire waist
•Tri-Release shatter-resistant, polymer buckle
features 3-point release for added security
safariland.com 800.347.1200
™
110
8300 Duty Belt System 2" (50 mm)
•Hook and loop lining
•Tough, double-layered web construction
•Includes duty belt, liner and 4 attached keepers
•Tri-Release™ shatter-resistant polymer buckle
with 3-point release
8110 W
eb Belt with Hook Lining
2" (50 mm)
•Hook lined for use with 8106 Liner Belt
•Tough, double-layered web construction
•Smooth, edge-bound finish for extra comfort
•Tri-Release shatter-resistant polymer buckle
with 3-point release
™
7221 Ballistic Belt 2" (50 mm)
•Ballistic weave trilaminate construction
•Both ends are skived, allowing a lower profile
around the buckle
•Coplok™ shatter-resistant,
polymer buckle features
3-point release for added
security
•Available in FDE Brown,
Foliage Green, or Black
finishes
7235 Duty Belt System 2.25" (58 mm)
•Five part laminate construction for long lasting
shape and extra durability
•Ballistic weave fabric outer and loop lining,
with foam center, and a stiffener sandwiched
between two layers of closed-cell foam for
support and comfort
•Includes duty belt, liner, and 4 attached keepers
•Coplok™ shatter-resistant, polymer buckle
features 3-point release for added security
7215 Border Patrol Belt 2.25" (58 mm)
•Ballistic weave fabric with loop lining encases
a foam-layered stiffener for support and
comfort
•Metal parachute-style buckle closure
•Accepts standard Safariland® UBL
•Its trilaminate construction features a
ballistic weave fabric exterior with a
high-density, closed-cell foam center and
a smooth Coptex™ knit lining
•Reinforced hidden snap or hook and loop
closure
•Some models available in OD
•Fits 2.25" (58 mm) belts unless otherwise
specified
BIANCHI
7344
FIREARMS ACCESSORIES
7344 Slimline Double Magazine Pouch
•Magazines are oriented “face out” to save space on
duty belt
•Tension screw permits adjustability for magazine size
•Fits 2.25" (58 mm) belt widths
•Dual web belt loop fits 2" (50 mm) and 2.5" (58 mm)
•Magazines are oriented “face out” to save
space on duty belt
PATENTED
•When worn horizontally, has minimal exposure
above belt line
•Three magazines in approximately the same
space of previous dual magazine designs
•Dual web belt loop fits both 2" (50 mm) and 2.25"
(58 mm) belts
7302 D ouble Magazine Pouch
•Injection-molded belt loop for horizontal or
vertical carry
•Hook and loop or hidden snap closure
•Also available in OD
7320 Triple Threat
•Fits 2.25" (58 mm) belt widths
LESS LETHAL
•Injection-molded belt loop for horizontal or
vertical carry
•Hook and loop or hidden snap closure
PROTECTIVE GEAR
7345 Slimline Triple Magazine Pouch
7303 Single Magazine Pouch
7345
PATENTED
DUTY GEAR
•Magazine pouch cavities expand both
front and rear, making for a snugger fit,
a trimmer look and less strain on the
equipment
•These pouches feature our exclusive Roll
Top™ lid for a smooth, rounded closure and
a custom fit for equipment of various sizes
ARMOR
•An exclusive Bianchi® technology
featuring a patented method of molding to
contour the laminate to the exact shape of
the equipment it will carry
™
II Double Magazine Pouch
•Injection-molded belt loop for vertical or
horizontal carry
ALL SHOWN ARE PATENTED
FORENSICS
•Tension screw adjustment permits various
drawing angles
•Fits 2.25" (58 mm) belt widths
7301 S peedloader Pouch
•AccuMold® trilaminate with ballistic weave
exterior and Coptex™ lining
•Dual web belt loop design fits 2" (50 mm) and 2.25"
(58 mm) belts
7302
7320
7301
7335 E DW Single Pouch
•Designed for the Taser® X26 cartridge
•Holds one cartridge
•Dual web belt loop fits 2" (50 mm) and 2.25" (58
mm) belts
7336 E DW Double Pouch
ARMOR SYSTEMS
7303
•Designed for the Taser® X26 cartridge
7336
•Holds two cartridges
•Dual web belt loop fits 2" (50 mm) and 2.25"
(58 mm) belts
bianchi-intl.com bianchicowboy.com
111
TRAINING GROUP
7335
7300
7300 C overed Handcuff Case
•2 sizes hold one pair chain or hinged
handcuffs
•Hook and loop or hidden snap
closure
PATENTED
• Dual web belt loop fits both 2" (50 mm)
and 2.25" (58 mm) belts
•Also available in OD
7334 Open Top Handcuff Case
•Holds one pair chain handcuffs
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
7317 Double Handcuff Case
•Holds two pair standard chain handcuffs
•Hook and loop or hidden snap closure
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
ALL SHOWN ARE PATENTED
7318 U ltimate Hinge Handcuff Case
•Holds one pair Safariland™ 8142 cuffs
•Hook and loop or hidden snap closure
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
7307 Mace /OC Spray Holder
®
7334
7317
7318
•2 sizes for MK-2, MK-3 and MK-4 canisters
•Hook and loop or hidden snap closure
•Dual web belt loop fits both 2" (50 mm)
and 2.25" (58 mm) belts
•Also available in OD
7308 O pen Top Mace /OC Holder
®
•3 sizes fit MK-2, MK-3 and MK-4 canisters
•Dual web belt loop fits 2" (50 mm)
and 2.25" (58 mm) belts
7312 E xpandable Baton Holder
•Covered hole in back allows baton to be
placed in pouch fully expanded
7307
7308
7312
7310
7311
7327
•Dual web belt loop fits 2" (50 mm)
and 2.25" (58 mm) belts
7310 M ini-Light Holder
•Fits AA-cell lights
•Hook and loop or hidden snap closure
•Dual web belt loop fits 2" (50 mm)
and 2.25" (58 mm) belts
•Also available in OD
7311 Compact Light Holder
•3 sizes fit most compact lights
safariland.com 800.347.1200
•Hook and loop or hidden snap closure
112
•Dual web belt loop fits both 2" (50 mm)
and 2.25" (58 mm) belts
7327 Rail Mounted Light Pouch
•Holds Streamlight® M3, M5, M6; Glock GTL10
and TLR-1, TLR-2
•Hidden snap closure
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
–Officer Jeff Anderson
•Features the Safariland® 744BL Belt Clip
7314/7314S U niversal
Radio Holder
•Can be attached to Safariland Leg Shroud
with ELS Fork (purchased separately)
•Elastic security strap with snap closure
•Protects Smartphone from damage or dirt
during typical law enforcement activities
•Also available in OD
•2 models fit most hand-held radios
FIREARMS ACCESSORIES
•Fits 1.5" (38 mm) to 2.25" (58 mm) belts
BIANCHI
•Designed to fit most popular sizes
DUTY GEAR
7337 Smartphone Case
7337
ARMOR
" I am both a recreational shooter and a police officer. I have found the Bianchi
product line to be superior in quality and innovation. It is well designed,
constructed, and tested. Whether down at the range, carrying concealed,
or on Duty…Bianchi is the only choice for me."
•7314S features a two-piece adjustable
swivel base and mount
7324/7324S Slimline Radio
Holder
•Holds compact hand-held radios
•Elasticized security strap
•Slim design offers less bulk
PROTECTIVE GEAR
•7324S features a two-piece adjustable
swivel base and mount
7323 Adjustable Radio Holder
•Holds compact hand-held radios
•Elasticized security strap
•Slim design offers less bulk
ARS Radio Swivel Attachment
PATENTED
PATENTED
PATENTED
•ARS belt loop swivel attachment also
sold separately
LESS LETHAL
•2.25" (58 mm) belt loop
7316 Silent Key Holder
•Roll Top™ wraparound design
•Hook and loop closure
7315 Pager/Glove Holder
7324
7324S
7323
ARS
7316
•Holds most pocket pagers or two pair
latex gloves
FORENSICS
7314
7314S
•Hook and loop or hidden snap closure
•Dual web belt loop fits both 2" (50 mm)
and 2.25" (58 mm) belts
7315
7328
7328 Flat Glove Holder
•Holds two pair latex gloves
•Trim & compact
ARMOR SYSTEMS
•Hook and loop or hidden snap closure
•Dual web belt loop fits both 2" (50 mm)
and 2.25" (58 mm) belts
PATENTED
113
TRAINING GROUP
bianchi-intl.com bianchicowboy.com
7409 Flashlight Ring
•Molded ring locks flashlight in place
•1" web
7405K K ey Holder Belt Keeper
•1" web keeper with polymer key holder
attached
•Dual snap closure
7406 B elt Keeper
•1" web
•Dual-snap or hook and loop closure
•Sold in 4-pack
7409K F lashlight Ring Belt Keeper
•Molded ring locks flashlight in place
7409
7405K
7406
7409K
7404
7405
•1" web keeper with molded ring saves room
on belt
7404 Baton Ring
•Fits standard and side-handle batons
•Sturdy, injection-molded ring
•1" web
7405 K ey Holder
•1" web keeper with polymer key clip
safariland.com 800.347.1200
•Sewn closure
114
•More affordable than leather
•Easily cleaned with only mild soap and
water. Bio-safe: washing with disinfectant
soap or bleach solution will handle
contamination problems. Great for
correctional institution duty
•Improved comfort translates into better
officer performance in the field
•Same beautiful look as leather – the crisp,
professional appearance of premium
leather without the weight, maintenance
and cost
BIANCHI
DUTY GEAR
•All molded accessories feature the dual
molded belt loop to fit both 2" (50 mm) and
2.25" (58 mm) belt widths
•Reinforced hidden snap closure unless
specified otherwise
FIREARMS ACCESSORIES
•Injection-molded belt loop for vertical or
horizontal carry
•Tension screw permits adjustability for
magazine size
•Magazines are oriented “face out” to save
space on duty belt
•Injection-molded belt loop for vertical or
horizontal carry
7903 S ingle Magazine/Knife Pouch
•When worn horizontally, has minimal exposure
above belt line
•Three magazines in approximately the same
space of previous dual magazine designs
•Fits 2.25" (58 mm) belt widths
•3 sizes fit most magazines
•Hidden snap
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
7902 D ouble Magazine Pouch
LESS LETHAL
7945
7945 Slimline Triple Magazine Pouch
PROTECTIVE GEAR
•Dual web belt loop fits 2" (50 mm) and 2.25"
(58 mm)
7944
7944 Slimline Double Magazine Pouch
•Magazines are oriented “face out” to save
space on duty belt
ARMOR
•Abrasion-resistant – exhibits a high level of
resistance to the daily knocks, scuffs and
abrasions of duty use.
•Lightweight – up to 50% lighter than
leather in most applications
•Vertical or horizontal carry
•4 sizes to fit most magazines
•Injection-molded belt loop
•Chrome, brass or hidden snap
7922 Triple Threat
™
II
Double Magazine Pouch
FORENSICS
•Injection-molded belt loop for vertical or
horizontal carry
•Tension screw adjustment permits various
drawing angles
7935 EDW Single Pouch
•Designed for the Taser® X26 cartridge
•Holds one cartridge
7922
7902
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
ARMOR SYSTEMS
7903
7936 EDW Double Pouch
•Designed for the Taser® X26 cartridge
•Holds two cartridges
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
7936
bianchi-intl.com bianchicowboy.com
115
TRAINING GROUP
7935
•Designed to fit most popular sizes
7937
7937 Smartphone Case
7900 Covered Handcuff Case
•Holds one pair chain or hinged handcuffs
•Features the Safariland® 744BL Belt Clip
•Chrome, brass or hidden snap
•Can be attached to Safariland Leg Shroud
with ELS Fork (purchased separately)
•Dual web belt loop fits 2" (50 mm) and 2.25"
(58 mm) belts
•Protects Smartphone from damage or dirt
during typical law enforcement activities
•Fits 1.5" (38 mm) to 2.25" (58 mm) belts
7917 D ouble Handcuff Case
•Holds two pair chain handcuffs
•Chrome, brass or hidden snap
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
7918 U ltimate Hinge Handcuff Case
•Holds one pair Safariland Model 8142
handcuffs or similar
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
7934 Open Top Handcuff Case
•Holds one pair chain or hinged handcuffs
•Dual web belt loop fits 2" (50 mm) and 2.25"
(58 mm) belts
7900
7917
7918
7934
7911 Covered Compact Light Holder
•3 sizes fit most compact lights; e.g.,
Streamlight®, SureFire®, S&W
•Chrome, brass or hidden snap
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
7926 C ompact Light Holder
•2 sizes fit most compact lights; e.g., SureFire®
6P, 6R; Streamlight® Stinger XT, Poly Stinger,
Scorpion
•Slides on to 2.25" (58 mm) belts
7927 Rail Mounted Light Holder
7911
7926
7927
7907
7908
• Compact & protective
• 2 sizes fit Streamlight®, M3, M5, M6 & Glock GTL10
• Dual web belt loop fits 2" (50 mm) and 2.25" (58 mm)
belts
7907 Mace /OC Spray Spray Holder
®
•2 sizes for MK-2, MK-3 and MK-4 canisters
•Chrome, brass or hidden snap
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
7908 O pen Top Mace /OC Spray Holder
safariland.com 800.347.1200
®
116
•3 sizes for MK-2, MK-3 and MK-4 canisters
•Sturdy web belt loop
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
ARMOR
7912 E xpandable Baton Holder
•Covered hole in back allows baton to be
placed in pouch fully expanded
BIANCHI
DUTY GEAR
•Fits Monadnock® AutoLock® HG baton
21" only
•Dual web belt loop fits both 2" (50 mm)
and 2.25" (58 mm) belts
7915 P ager/Glove Holder
•Chrome, brass or hidden snap
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
7928 F lat Glove Holder
•Holds two pair latex gloves with hook and
loop closure
•Trim and compact
•2.25" (58 mm) belt loop
PROTECTIVE GEAR
7916 Silent Key Holder
•Roll Top™ wraparound design
•Hook and loop closure
7906 Belt Keeper
•1" width available in chrome, brass or
hidden snaps
7912
7915
7928
7916
FIREARMS ACCESSORIES
•Holds most standard pagers or two pair
latex gloves
•Dual snap closure
•Sold in 4-pack
•Holds most hand-held radios
•Elasticized security strap with snap closure
•2-piece adjustable swivel mount for
comfort when riding in a vehicle
LESS LETHAL
7914S U niversal Radio Holder
7923 A djustable Radio Holder
•2 sizes hold compact hand-held radios
FORENSICS
•Elasticized security strap
•Slim design offers less bulk, more
convenience
7904 S ide-Handle Baton Holder
•Fits straight and side-handle batons
•Sturdy, injection-molded ring
ARMOR SYSTEMS
•One-way snap-on belt loop
7909 D -Cell Light Holder
•Molded ring locks flashlight in place
•Snap-on belt loop
7914S
7923
7904
7909
bianchi-intl.com bianchicowboy.com
117
TRAINING GROUP
7906
•Trilaminate with 600-denier woven finish
•With significant cost savings compared to
premium brands, PatrolTek™ also offers the
quality and functionality you’ve come to
expect from Bianchi®
•Dual belt loop design lets same pouch be
used for 2" (50 mm) and 2.25" (58 mm) belts
(most models)
•Contour molded technology
•Lightweight and weatherproof
•Pleated pouch lids offer a smooth closure
and great fit
•Easily cleaned with soap and water
•Stays flexible in cold weather
•Reinforced hidden snap closure
•Magazines are oriented “face out” to save
space on duty belt
•Tension screw permits adjustability for
magazine size
•Reinforced hidden snap closure
8045 Slimline Triple Magazine Pouch
•Magazines are oriented “face out” to save
space on duty belt
•Injection-molded belt loop for vertical or
horizontal carry
8045
PATENTED
•When worn horizontally, has minimal exposure
above belt line
•Three magazines in approximately the same
space of previous dual magazine designs
PATENTED
8044
8044 Slimline Double Magazine Pouch
8003 Single Magazine Pouch
•Hook and loop or hidden snap closure
•Dual web belt loop fits 2" (50 mm)
and 2.25" (58 mm) belts
8002 D ouble Magazine Pouch
•Vertical or horizontal carry offers versatility of use
•Fits 2.25" (58 mm) belt widths
•Hidden snap closure
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
8020 Triple Threat
™
II Double
Magazine Pouch
ALL SHOWN ARE PATENTED
•Injection-molded belt loop for vertical or
horizontal carry
•Tension screw adjustment permits various
drawing angles
8035 EDW Single Pouch
•Designed for the Taser® X26 cartridge
•Holds one cartridge
safariland.com 800.347.1200
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
118
8003
8020
8002
8036 EDW Double Pouch
•Designed for the Taser® X26 cartridge
•Holds two cartridges
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
8035
8036
ARMOR
8000 C overed Handcuff Case
•Holds one pair chain or hinged cuffs
•Hidden snap closure
ALL SHOWN IN THIS ROW ARE PATENTED
•Dual web belt loop fits 2" (50 mm)
and 2.25" (58 mm) belts
8017 D ouble Handcuff Case
•Holds 2 pairs chain handcuffs
•Hook and loop closure
8017
8018
8018 U ltimate Hinge Handcuff Case
8034
BIANCHI
8000
DUTY GEAR
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
•Holds one pair Safariland® Model 8142 cuffs
•Hook and loop or hidden snap closure
8034 O pen Top Handcuff Case
•Pull-through style
•Holds one pair chain cuffs
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
8038S R igid Handcuff Case
•Adjustable swivel mount
PATENTED
8038S
8001
PATENTED
8010
PATENTED
8011
•Contour molded long-lasting shape and
precise fit
8001 Single Handcuff Case with Key Slot
PROTECTIVE GEAR
•Holds one pair Safariland Model 8132 Rigid
Cuff or similar
FIREARMS ACCESSORIES
•Dual web belt loop fits 2" (50 mm) and 2.25"
(58 mm) belts
•Hidden snap closure
•Holds one pair chain or hinged cuffs
LESS LETHAL
•Slot to hold spare cuff key in lid
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
8010 M ini-Light Holder
•Fits AA-cell lights
•Hook and loop or hidden snap closure
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
PATENTED
8026
FORENSICS
8027
•Also available in OD
8011 C ompact Light Holder
•Hidden snap closure
•Full flap helps secure light
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
•Hook and loop closure
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
8026 Compact Light Holder
•Two sizes fit most 1" diameter lights
ARMOR SYSTEMS
8027 R ail Mounted Light Holder
•Holds all flashlight lengths
bianchi-intl.com bianchicowboy.com
119
TRAINING GROUP
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
8007 Mace /OC Spray Spray Holder
®
•Designed to fit most popular sizes
8037
•2 sizes for MK-2, MK-3 and MK-4 canisters
8037 S martphone Case
•Features the Safariland® 744BL Belt Clip
•Can be attached to Safariland Leg Shroud
with ELS Fork (purchased separately)
•Protects Smartphone from damage or dirt
during typical law enforcement activities
•Fits 1.5" (38 mm) to 2.25" (58 mm) belts
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
8008 O pen Top Mace /OC Spray Holder
®
•3 sizes for MK-2, MK-3, and MK-4 canisters
•Open top design for quick access
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
8012 E xpandable Baton Holder
•Baton holder w/ hole in back for reholstering
expanded baton
•Three sizes to fit 16", 21" and 26" Monadnock®
and similar batons,
8013S E xpandable Baton Holder with
Swivel
•Adjustable swivel mount
•Can be used with Monadnock® Hindi Baton Cap™
ALL SHOWN ARE PATENTED
•2" (50 mm) width belt loop
8014/8014S U niversal Radio Holder
•Holds most hand-held radios
•Adjustable elastic security strap with snap
closure
•8014S features a two-piece adjustable swivel
base and mount
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
safariland.com 800.347.1200
8007
120
8008
8012
8013S
8014
8014S
ARMOR
BIANCHI
DUTY GEAR
FIREARMS ACCESSORIES
PROTECTIVE GEAR
8015 P ager/Glove Holder
•Hidden snap closure
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
8028 Flat Glove Holder
•Holds 2 pair of latex gloves
•Trim and compact
8016 S ilent Key Holder
•Holds keys securely and silently
•Wraparound hook and loop closure
PATENTED
PATENTED
8015
8028
8016
8009
LESS LETHAL
•Dual web belt loop fits both 2" (50 mm) and
2.25" (58 mm) belts
•Dual web belt loop fits 2" (50 mm) and
2.25" (58 mm) belts
•1" web
•Molded plastic ring locks flashlight in position
•Fits D-cell lights
•Available in sewn or snap version
FORENSICS
8009 Flashlight Ring
8006 Belt Keeper
•1" web
ARMOR SYSTEMS
•Black finished brass snaps
•Sold in 4-pack
8006I Slide-On Belt Keeper
8006
8006I
• 1" web
• Keeps duty belt secure to liner belt
• Black finished brass snaps
121
TRAINING GROUP
bianchi-intl.com bianchicowboy.com
Military HOLSTERS
Military Product Color Offerings
BLACK
DAY DESERT
OD GREEN
UNIVERSAL
DIGITAL CAMO
MODELFINISH
UM84IBlack, OD, Woodland Camo, 3 Color Day Desert Camo,
Universal Digital Camo
UM84IIBlack, OD, Woodland Camo, 3 Color Day Desert Camo
UM84IIIBlack, OD, Woodland Camo, 3 Color Day Desert Camo
UM84R
Black, OD, Woodland Camo
UM92I
Black, OD, 3 Color Day Desert Camo
UM92II
Black, OD, 3 Color Day Desert Camo
M12OD
M13
Black, OD
Black, OD, Foliage
M1020
M1415 Black, OD
M1425
Black, Universal Digital Camo
UM84H Black, Foliage
UM84 Universal Military Holster
•Commercial offering of the military standard
issue M12 holster
•System can be worn 14 different ways
•Removable flap for conversion to thumb break
•Ambidextrous design
•Converts to shoulder holster with optional UM84H
Harness
UM84II
UM84I
•Equipped with Quick-Lock™ belt fastener
•Includes field cleaning rod
•Available for revolvers and semiautos
•3 sizes to fit 3" to 5" semiautos
•Fits up to 2.25" (58 mm) belt
UM92I/UM92II
safariland.com 800.347.1200
Universal Military Holster
122
•Commercial offering of the military
standard issue M12 holster with the
addition of a polymer trigger guard
insert that stabilizes the trigger guard
of certain large frame autos; ideal for
Sig Sauer and Glock weapons
•Ambidextrous
M12 Universal Military Holster
•U.S. Armed Forces standard issue for
the Beretta M9 sidearm
•Removable flap for conversion to
thumb break
•Ambidextrous design
•System can be worn 14 different ways
•Includes field cleaning rod
•Converts to shoulder holster with M13
or UM84H
•Equipped with Quick-Lock™ belt
fastener
•Equipped with Quick-Lock™ belt
fastener
•2 sizes to fit 4" - 5" semiautos
•Includes field cleaning rod
•Compatible with all UM84 accessories
•Fits up to 2.25" (58 mm) belt
UM84III
ARMOR
BIANCHI
DUTY GEAR
UM84R Universal Military Holster
•Commercial offering of the military standard
issue M12 holster for revolvers
•Removable flap for conversion to thumb break
•Ambidextrous
•Includes field cleaning rod
•Equipped with Quick-Lock™ belt fastener
•Fits up to 2.25" (58 mm) belt
•Adapter kit allows Safariland MLS 15 Locking
Fork to attach to the back of the UM84/UM92
Universal Military Holsters
•Locking Fork allows the holster to be mounted
directly into MOLLE loops or into an MLS 17 or
MLS 18 Receiver Plate
•Allows quick switching of holster from leg to
vest or any other mounting point
M1425 Tactical Hip Extender
•Provides a rigid platform and upper attachment
point for accessories
•Includes a high-mounted leg strap
PROTECTIVE GEAR
•Converts to shoulder holster with optional
UM84H
M1430 Universal Military Adapter
FIREARMS ACCESSORIES
Holster not included
•Features Quick-Lock™ belt fastener
•Available in Black, Universal Digital Camo
•Fits up to 2.25" (58 mm) belt
•Designed to break away at the militaryspecified pressure of 140 lbs.
LESS LETHAL
FORENSICS
M1415 Thumb Snap System
M13 Chest Harness
•For use when flap is removed from UM92/
UM84/M12
•Cross-chest design is ideal for helicopter and
other close-quarter use
•Ambidextrous design; fully adjustable
•Offers faster performance in tactical situations
•Ambidextrous design
•To be used without holster flap
•Provides added retention
•Completely adjustable
•Fits up to 48" (122 cm) chest
•Available in Black and OD
•Dual positioning
•Available in Black and Foliage
•Available in Black and OD
bianchi-intl.com bianchicowboy.com
123
TRAINING GROUP
•Converts hip holster to shoulder holster to be
carried in vertical position
ARMOR SYSTEMS
UM84H Underarm Shoulder Harness
7200/7120 AccuMold
®
OD Duty Belt Rig
•A select group of our best-selling AccuMold items available in OD Green
•Featuring our 7120 Defender® duty holster for the Beretta 92 & Glock 17/22
•Models offered are those shown; see pages 101-106
•Special order item; see dealer for availability
M1020 Web Pistol Belt
M1030 Military Magazine Pouch
M1025 Military Magazine Pouch
•Holds four magazines
•Holds two magazines
•Official military plastic buckle
•Trim & compact
•Trim & compact
•One size fits 30"-48" (76 cm-122 cm) lengths and
2.25" (58 mm) width
•Quick-Lock™ belt fastener attaches securely
to web belt
•Quick-Lock™ belt fastener attaches securely
to web belt
•Available in Black and OD Green
•Fits up to 2.25" (58 mm) belt
•Fits up to 2.25" (58 mm) belt
•Available in Black, 3 Color Day Desert Camo,
OD Green
•Available in Black, 3 Color Day Desert Camo,
Universal Digital Camo, OD Green
safariland.com 800.347.1200
•Tough mil-spec nylon construction
124
PHOTO COURTESY: US ARMY
ARMOR
T6510 Modular Accessory Panel
•Five attachment points to mount accessories (two
are bi-directional)
•Adjustable ambidextrous leg strap with 2" quickrelease buckle for quick deployment
•Hook and loop vertical adjustment to customtailored panel location on thigh
BIANCHI
DUTY GEAR
•Non-slip Gription™ mesh backing keeps panel
securely in place on leg
•Web attachment points for use with Bianchi®
military holster with Quick-Lock™ belt fastener
FIREARMS ACCESSORIES
PROTECTIVE GEAR
LESS LETHAL
FORENSICS
•Adjustable to fit most pistols with tactical
lights mounted
•Quick-Lock™ belt clip for attachment to T6510
Accessory Panel, to any MOLLE attachment
system or to an equipment belt up to 2.25"
(58 mm) wide
T6505 Tac Holster
•Quick-Lock clip for attachment to T6510
Accessory Panel, to any MOLLE attachment
system or on an equipment belt up to 2.25"
(58 mm) wide
™
•Features polymer trigger guard shield that
protects and stabilizes
•Rugged Ranger™ trilaminate construction
•Rugged Ranger™ trilaminate construction
•Available in Black Ballistic Weave finish
•Holds two 30-round AR15-type magazines
•Quick-Lock™ belt clip for secure attachment
•Dual hook/loop and snap closure for added
security
•Rugged ballistic trilaminate construction
•Available in Black Ballistic Weave finish
•Ambidextrous
•Available in Black Ballistic Weave finish
bianchi-intl.com bianchicowboy.com
125
TRAINING GROUP
•Secondary retainer strap for a double lock on
the thumb break for additional retention when
required
T6521 Double AR15 Pouch
ARMOR SYSTEMS
T6500 Tac Holster LT
CONCEALMENT HOLSTERS
Allusion™
The new Bianchi® Allusion series brings you the best of leather and synthetic materials for superior performance and good
looks. We start out with a thermal-molded, synthetic shell precisely formed to the firearm. Then we wrap it with our premium
grade, full grain, vegetable-tanned cowhide and give it our finishing touches, including burnished edges and our leather
finish. With the Allusion series, we are also able to add features not typically found with leather-only construction, such as
our retention detent and smooth draw and re-holstering.
130 Classified
125 Consent
™
130
™
• Premium full grain leather exterior with a laminate
synthetic liner for a smooth draw and long lasting
wear
•Second pair of belt loops provided to switch holster
to an IWB (Inside the Waistband) design
•Dual snap belt loop for easy on/off access and
added security
•Thumb break strap and trigger guard detent for
enhanced weapon retention
•Holster covers muzzle of the gun, protecting your
weapon and clothing
•Low-profile, contoured body-hugging design
• Premium full grain leather exterior with a laminate
synthetic liner for a smooth draw and long lasting wear
•Second pair of belt loops provided to switch holster
to an IWB (Inside the Waistband) design
•Dual snap belt loop for easy on/off access and
added security
•Open top design for quick draw and easy reholster
•Trigger guard detent for enhanced weapon retention
•Holster covers muzzle of the gun, protecting your
weapon and clothing
•Low-profile, contoured body-hugging design
•Fits 1.5" (38 mm) belt width
•Fits 1.5" (38 mm) belt width
•Available in Plain Tan or Plain Black finish
•Available in Plain Tan or Plain Black finish
135 Suppression
™
126
135
safariland.com 800.347.1200
•Premium full grain leather exterior with a laminate synthetic liner for a
smooth draw and long lasting wear
•Dual tuckable C-Clip design for attachment to the belt, provides strong
belt retention on the holster while minimizing visible portion shown
•Anti-bacterial and microbial foam padding on inside liner of leather
backing to prevent germs and odor from accumulating
•Padded liner provides added comfort not normally found on bare leather
designs
•Slight detent in trigger guard for enhanced weapon retention
•Available in Plain Tan or Plain Black finish
125
The Allusion series perfectly matches tradition and cutting edge technology bringing leather holsters into the 21st century.
ARMOR
BIANCHI
DUTY GEAR
57 Remedy
™
•Deeply molded contours on front
of holster for comfortable fit and
classic good looks
™
•Dual belt slots fit up to 1.5" (38 mm)
belts for better, tighter fit with belt
•Open top for quick access and
draw; ideal for rear hip carry
•Available in full grain leather, Plain
Tan or Plain Black finish
•Deeply molded contours on front
of holster for comfortable fit and
classic good looks
•Low profile, hi-ride design
effectively conceals firearm with
minimal bulk
•Available in full grain leather, Plain
Tan or Plain Black finish
•Dual belt slots fit up to 1.5" (38 mm)
belts for better, tighter fit with belt
PROTECTIVE GEAR
•Reinforced, rectangular thumb
snap for quick snap release
and helps guard against strap
falling into trigger guard when
re-holstering
FIREARMS ACCESSORIES
56 Serpent
LESS LETHAL
FORENSICS
™
•Low profile, ultra hi-ride design
effectively conceals firearm with
minimal bulk
•Heavy 30˚ cant for small of back or
rear hip carry
•Dual belt slots fit up to 1.5" (38 mm)
belts for better, tighter fit with belt
•All molding to the front of
the holster, providing more
comfortable fit for wearer
•Available in full grain leather, Plain
Tan or Plain Black finish
bianchi-intl.com bianchicowboy.com
127
TRAINING GROUP
•Open top for quick access and
draw with a low profile, compact
design
ARMOR SYSTEMS
58 P.I.
PATENTED
75 Venom
77 Piranha
™
™
•Slim profile and compact design in a full-sized
holster
•Unique, low cut front provides user with a swift
draw stroke
•Rear belt slot pulls holster close to body for
excellent concealability
•15˚ strongside cant
•Open muzzle design allows various barrel lengths
•Contour molded for exact gun fit
•Fits up to 1.75" (45 mm) belt width
•Available in full grain leather, Plain Tan or Plain
Black finish
•3-slot design allows custom adjustment for
user preference; features both strongside and
cross draw carry
•Fits up to 1.75" (45 mm) belt width
•Available in full grain leather, Plain Tan or Plain
Black finish
84 SnapLok
™
•Provides the speed of an open top holster with
the security of Auto Retention™, which retains
weapon upon holstering
•FingerLok™ retention mechanism secures pistol
by the trigger guard upon inserting the weapon
in the holster; depress device to draw
•Belt loops snap on and off for easy on/off
convenience and may be adjusted for snap
opening in up or down position
•Fits up to 1.5" (38 mm) belt loops
•Available in full grain leather, Plain Tan or Plain
Black finish
PATENTED
PATENTED
4584 Evader
safariland.com 800.347.1200
™
128
82 CarryLok
™
5 Black Widow
™
•Provides the speed of an open top holster with
the security of Auto Retention™, which retains
weapon upon holstering
•Provides the speed of an open top holster with
the security of Auto Retention™, which retains
weapon upon holstering
•Features ultra hi-ride carry and thumb snap
closure
•FingerLok™ retention mechanism secures
pistol by the trigger guard upon inserting the
weapon in the holster; depress device to draw
•FingerLok™ retention mechanism secures pistol
by the trigger guard upon inserting the weapon
in the holster; depress device to draw
•Dual belt slots for superior stability
•Trilaminate construction features rugged
ballistic weave exterior, closed-cell foam
center and smooth nylon pack cloth lining for
a slick draw
•Features stay-open design for efficient onehanded holstering
•Reinforced open top design stays open for
efficient one-handed reholstering
•Dual snap belt loop for easy on/off access fits
up to 1.75" (45 mm) belt widths
•Available in Black Ballistic Weave finish
•16˚ butt forward carry
•Fits up to 1.75" (45 mm) belt widths
•Available in full grain leather, Plain Tan or Plain
Black finish
•Compact profile for excellent concealability
•Open muzzle design allows various barrel lengths
•Fits up to 1.75" (45 mm) belt width
•Available in full grain leather, Plain Tan or Plain
Black finish
ARMOR
BIANCHI
DUTY GEAR
PATENTED
®
7506 Thumbsnap Belt Slide
II
•Ultra hi-ride for excellent concealability
105 M inimalist
™
•A feather-light belt slide design, molded and
contoured to snug close to body
•3-slot design allows user to vary the carry
angle for his/her preference
•AccuMold® trilaminate construction with
Coptex™ lining for a smooth draw
•Strongside or cross draw carry, open muzzle
design
•Molded and pre-curved to fit the body for
maximum comfort
•Adjust-A-Strap™ thumb break feature permits
adjustment for different handguns
•Fits up to 1.75" (45 mm) belt width
•Available in full grain leather, Plain Tan or Plain
Black finish
•Dual snap web loops with firm-action snaps
provide convenient quick release on belts up
to 1.75" (45 mm) wide
•Available in Black Ballistic Weave finish
•Features elastic loop retainer tab for secure
retention
•Belt slide design provides excellent stability
for weapon
•Slots designed to pull firearm in close to the
hips for optimum concealment
•Suede lining
•Fits belt widths up to 1.75" (45 mm)
•Available in full grain leather, Plain Tan or Plain
Black finish
101 Foldaway
LESS LETHAL
™
PROTECTIVE GEAR
•Retention strap offers both thumb break and
front strap opening
With Slots
•A compact, open top design ideal for daily wear
FIREARMS ACCESSORIES
7 Shadow
101
•Minimalist design fits many different
gun models in few skus
•Design catches and holds trigger
guard to help keep weapon secure
and stable
•Can be folded away flat onto the belt
when not in use for inconspicuous
appearance
FORENSICS
•Keeps as close to the body as
possible without being an IWB
holster
•Fits 1.5" (38 mm) belt widths
•Available in full grain leather, Plain
Tan or Plain Black finish
ARMOR SYSTEMS
55L Lightnin’
®
•Designed specifically for hammerless
revolvers
•Finger-snap strap crosses behind trigger guard
for a middle finger release
•Fully suede lined
•Rides high and close to the body for maximum
comfort and concealability
•Available in full grain leather, Plain Tan finish
bianchi-intl.com bianchicowboy.com
129
TRAINING GROUP
•Fits up to 1.75" (45 mm) belt width
PATENTED
PATENTED
83 PaddleLok
7500 AccuMold
™
®
•Provides the speed of an open top
holster with the security of Auto
Retention™, which retains weapon
upon holstering
•FingerLok retention mechanism
secures pistol by the trigger guard
upon inserting the weapon in the
holster; depress device to draw
™
•Paddle offers a variable range of
cant and height adjustability
•Fits up to 1.75" (45 mm) belt widths
•Available in full grain leather, Plain
Tan or Plain Black finish
safariland.com 800.347.1200
•Non-slip, contoured paddle
features molded elastomer ridges
for maximum grip on trousers
or belt, yet offers easy on/off
convenience
130
59 Special Agent
®
•Features our close-fit paddle
design for comfort and
concealability
•Exclusive, non-slip paddle features
molded elastomer ridges that
retain paddle, yet it offers easy on/
off convenience
•Paddle design offers virtually
limitless range of cant, permitting
both strongside and cross draw
carry
•Adjustable for various carry
heights on the waist/hip
•Available in full grain leather,
Plain Tan finish
Paddle Thumbsnap
•Easy on/off convenience; exclusive,
injection-molded non-slip paddle;
adjustable for various carry heights
on the waist/hip
•Paddle design offers virtually
limitless range of cant, permitting
both strongside and cross draw
carry
•AccuMold trilaminate construction
with ballistic weave fabric, exterior
high-density closed-cell foam center
and a Coptex™ lining for a smooth
draw
•Available in Black Ballistic Weave
finish
120 Covert Option
ARMOR
™
•Dual belt loop straps for
maximum stability and firm
placement on belt
•Slight forward cant for efficient
drawing while seated
•Reinforced top for instinctive
one-handed reholstering
BIANCHI
DUTY GEAR
•Low profile design effectively
conceals firearm with minimal
bulk
•Belt wraps around suede center
panel to help retain firearm in
holster
3S Pistol Pocket
•High holster back protects
clothing and keeps edges of gun
away from body
®
•Fits up to 1.75" (45 mm) belts
•Fully adjustable swivel offers various carry options
•Available in full grain leather,
Plain Tan finish
•Thumb break design for those who prefer more
security in an IWB holster
•Open muzzle design
•Can be worn both strongside and cross draw
•1.75" (45 mm) belt loop
•Available in full grain leather, Plain Tan finish
FIREARMS ACCESSORIES
•Inside the waistband with dual snap
attachment to belt
PROTECTIVE GEAR
•Soft suede construction
•Ultra-thin profile provides optimum
concealment
•Hi-ride; strongside or cross draw
•Available in Rust suede finish
™
100 Professional
Waistband
™
•Inside waistband design provides comfort and
concealability
•Thumb break design for those who prefer more
security in an IWB holster
•Adjust-A-Break™ thumb break provides
adjustability for a variety of gun models
•Ultra-thin and lightweight suede design for
concealability
•Hi-ride; strongside or cross draw
•Heavy-duty 1.75" (45 mm) clip keeps holster
securely in place
•Deep concealment design with high back to
comfortably shield torso against gun’s rough
edges
•Features a non-slip suede-lined exterior next
to body
•Rides at optimum angle inside waistband to
ensure proper firing grip
•Heavy-duty spring-steel belt clip securely
anchors holster to belt or trousers
•Fits up to 1.75" (45 mm) belts
•Available in full grain leather, Plain Tan finish
FORENSICS
•Heavy-duty spring-steel clip fits up to 1.75"
(45 mm) belts
6D ATB
•Available in Rust suede finish
™
•Premium full grain leather exterior with a laminate synthetic liner
for a smooth draw and long lasting wear
•Dual tuckable C-Clip design for attachment to the belt provides
strong belt retention on the holster while also minimizing visible
portion show
•Anti-bacterial and microbial foam padding on inside liner of
leather backing to prevent germs and odor from accumulating
ARMOR SYSTEMS
135 Suppression
135
•Worn inside the waistband
LESS LETHAL
6 Waistband
•Padded liner provides added comfort not normally found on bare
leather designs
•Available in Plain Tan or Plain Black finish
bianchi-intl.com bianchicowboy.com
131
TRAINING GROUP
•Slight detent in trigger guard for enhanced weapon retention
BODY ARMOR HOLSTERS
(Shown closed,
attached to
hook and loop)
4420 Tranzit
4421 Tranzit
®
®
safariland.com 800.347.1200
II
•Unique nylon holster that attaches
to common body armor vests with
hook and loop
•Perfect for deep concealment
when a vest is warranted or with
a backup weapon
•Unique nylon holster that attaches
to common body armor vests with
hook and loop
•Perfect for deep concealment
when a vest is warranted or with a
backup weapon
•Design uses the holster as a “side
strap” for common body armor
•Additional pocket for optional side
plate
•Design uses the holster as a “side
strap” for common body armor
•Additional pocket for optional
side plate
•Elastic webbing secures weapon
close to body
•Fits most compact pistols and
revolvers
•Pull strap allows quick access to
the weapon by pulling up on a small,
inconspicuous D-ring (as shown)
•Fits most compact pistols and
revolvers
ANKLE HOLSTERS
132
PATENT pending
4750 Ranger
™
150 Negotiator
Triad™
™
•Innovative tri-strap design offers
adjustability to fit virtually any
ankle securely and comfortably
•Elasticized retention strap with
easy pull tab for quick, easy
access to firearm
•Unique, contouring center
compression strap allows user
to pull butt of gun snugly against
calf for a low profile and to keep
weapon secure
•Ankle pad cushion is removable
for easy cleaning and airing
•Adjustable ankle pad can be
custom positioned for maximum
comfort over anklebone
•Elastic webbing secures weapon
close to body
•Available in Black Ballistic Weave
finish
Ankle Holster
•Neoprene leg strap expands to fit
comfortably around leg
•Lined with genuine sheepskin for
comfort and breathability
•Holster is canted for ease of draw
•Available in full grain leather, Plain
Black finish
•2" adjustable elastic leg strap
secures and keeps holster in
place
150L Negotiator Ankle Holster with 3" Strap
•Same product features and benefits as 150 except with 3" extended leg strap
ARMOR
BIANCHI
DUTY GEAR
FIREARMS ACCESSORIES
•Full grain leather interior for a smooth draw
LESS LETHAL
™
152
PROTECTIVE GEAR
152 Pocket Piece
•Vertical Assist finger pad for facilitating
draw from pocket
•Designed with dual “pocket hooks” to
prevent holster movement when drawing
•Leather is rough side out to cling to pocket
interior
•Available in full grain leather, rough side out to
help grip clothing
ARMOR SYSTEMS
“I have been using your products for over 10 years. Thanks for providing a
durable quality duty holster that is good looking and is very easy to use (great
ergonomics). Your customer support deserves an “Atta boy” also, great folks
to work with.”
133
TRAINING GROUP
–Scott Fox
Firearms Instructor
Montana Highway Patrol
bianchi-intl.com bianchicowboy.com
FORENSICS
•Model specific design for better fit
SHOULDER HOLSTERS
Agent™ Accessories
X16 Agent
™
X16A D ouble Magazine Pouch
•Crafted from premium full grain cowhide, hand
boned for a precise fit
•Featherweight, slimline design for all day
comfort and concealability
•Comes with a choice of either contour-molded
magazine pouch or a low-profile speedloader
panel, and X-style pivoting harness that is
flexible, strong and contours to the torso
•Includes 2 suede leather tie-downs to secure
holster and offside pouch to belt
•Offered for both revolvers and semiautos
X16T Tie-Down Accessory
•Available in full grain leather, Plain Tan finish
X16P Offside Accessory Panel
X16R S peedloader Panel
The X16 harness has a pivoting design that
moves with the body and adjusts to fit male
and female torsos up to 48" (122 cm).
Tuxedo® Accessories
4620T T ie-Down Accessory
4620A D ouble Magazine
safariland.com 800.347.1200
Pouch
134
4620 Ranger
™
Tuxedo®
The X15 harness adjusts to fit male
and female torsos up to an optional
52" (128 cm).
X15 #X15
®
Shoulder Holster
•Lightweight trilaminate construction, offering padded protection for the
firearm
•Dual spring closure provides firearm retention and stability
•420-denier pack cloth exterior for long wear and featherweight comfort,
with a soft suede-like interior lining
•Detachable retainer strap
•Comes complete with holster X-harness, two tie-down straps and double
mag pouch or speedloader panel
•Super-thin X-harness is one size and fits up to a 48" chest
•Half lined with full grain leather for a smooth draw
•Fully adjustable soft leather harness that adjusts to a 48" chest
•Available in full grain leather, Plain Tan finish
ARMOR
20A Open Top Magazine Pouch
•Heavy-duty, spring-steel clip
•Quick and compact
•Fits belts up to 1.75" (45 mm)
45 Mag/Cuff Paddle
•Available in full grain leather, Plain Tan finish
•Provides easy one-handed draw for
handcuffs
•Dual belt loop straps secure pouch to belt
•Can be angled for right or left hand carry
•Complements Bianchi® Model 120 holster
•Available in full grain leather, Plain
Tan or Plain Black finish
•Fits up to 1.75" (45 mm) belts
•Available in full grain leather, Plain Tan finish
24 CarryCuff
™
Handcuff Case
•Belt loop snaps on/off for user convenience
•Fits up to 1.75" (45 mm) belt loops
•Available in full grain leather, Plain Tan or
Plain Black finish
™
Angled Handcuff Case
•Angled at 45˚ for quick access to cuffs
FIREARMS ACCESSORIES
•Pull-through style for linked and hinged cuffs
25 C arryCuff
BIANCHI
•Fits standard, oversized and hinged
handcuffs
21 Open Top Magazine Pouch
DUTY GEAR
45
•Paddle adjustable for carry height
and angle
•Pull-through style for linked and hinged cuffs
21
24
25
•Belt loop snaps on/off for user convenience;
left and right hand versions for user’s draw
preference
•Fits up to 1.75" (45 mm) belt loops
•Available in full grain leather, Plain Tan or
Plain Black finish
580 S peed Strips
PROTECTIVE GEAR
20A
™
•Speed Strips™ fit in most single mag/knife
pouches and trouser or shirt pockets
•A perfect slim backup for speedloaders
•Injection molded from a flexible urethane
material, they hold 6 rounds and load two
at a time
LESS LETHAL
•Developed by John Bianchi over 50 years
ago as a compact loading device for
revolvers
•Available for .38/.357 and .44/.45 caliber
580
™
Belt
1.25" (32 mm) & 1.5" (38 mm)
•Premium full grain leather, oil tanned to a
rich, lustrous finish
•Solid brass buckle on tan; chrome plated
brass on black belt
FORENSICS
B28/B29 P rofessional
•Plain Tan or Plain Black finish
ARMOR SYSTEMS
B28
B29
135
TRAINING GROUP
bianchi-intl.com bianchicowboy.com
19/19L
SPORTING HOLSTERS & CASES
19/19L Thumbsnap
1L Lawman
™
•Western style, front strap closure; fits
single-action revolvers
•Wide belt loop provides stable
carry close to the body; hiride for maximum comfort and
concealability
•Integral thumb snap enhances
handgun retention
•19 (unlined); 19L (full suede lining)
•1.75" (45 mm) belt loop; semiautos
only
•Available in full grain leather, Plain
Tan finish
5BH/5BHL Thumbsnap
111 Cyclone
™
•Features integral thumb snap closure
•Hi-ride carry, open muzzle-design
•Strongside hi-ride carry; carries gun close to
body for added comfort
•Full suede lining
•5BH (unlined); 5BHL (full suede lining)
•Foldover belt loop fits 1.75" (45 mm) to
2.25" (58 mm) belts
•2"-3" holsters fit 1.75" (45 mm) belt slots
•Available in full grain leather,
Plain Tan finish
•4" and larger holsters include 1.75" (45 mm) and
2.25" (58 mm) belt slots; revolvers only
•Available in full grain leather, Plain Tan finish
•Thumb snap closure for secure fit and covered
trigger guard design for both hunting and
concealment applications
•Fully suede lined
•Unique belt loop design allows either
strongside or cross draw carry
•Quick release thumb snap
•Hi-ride carry, open muzzle design for both
semiautos and revolvers
•1.75" (45 mm) belt slot
safariland.com 800.347.1200
•Available in full grain leather, Plain Tan finish
136
B4 R anger Belt 1.75" (45 mm)
•Full grain leather, unlined
•Popular Western billet design
•Solid brass buckle
•Full grain leather, Plain Tan or
Basket Tan finish
B9 R eversible Fancy Stitched B12 Reversible Sport Stitched B21 C ontour Belt 1.75" (45 mm)
Belt 1.5" (38 mm)
•Fancy stitch design
•Full grain leather with natural oil
tan finish reverses to suede
Belt 1.75" (45 mm)
•Full grain leather with natural oil
tan finish reverses to suede
•Solid brass buckle
•Reversible, with fancy stitch
design
•Reversible, with fancy stitch design
•Solid brass buckle
•Full grain leather, Plain Tan finish
•Solid brass buckle
•Full grain leather, Plain Tan finish
•Two thicknesses of heavy full
grain leather
•Contoured to wrap smoothly
around waist
•Full grain leather, Plain Tan finish
ARMOR
BIANCHI
DUTY GEAR
4100/4101 Ranger
HuSH™ System
™
•Trilaminate construction featuring high density
closed-cell foam for a memory fit and smooth
nylon interior lining for a smooth draw
•Cross-chest carry design; can also be worn on
belts up to 2.25" (58 mm) wide
•Features a heavily padded load-bearing
harness for comfort
®
Sporting Holster
•Ideal for field, hunting and concealment carry
•Contour molded high-density trilaminate
AccuMold® construction for an exacting fit
•Hi-ride carry with closed muzzle and 10-degree
forward cant that aids in both comfort and
presentation
•Unique Coptex™ poly-knit lining for a smooth draw
•4100 (Unscoped); 4101 (Scoped)
•Sleek front strap closure incorporates AdjustA-Strap™ feature to ensure a secure fit over
the hammer
•Available in Black Ballistic Weave finish
•1.75" (45 mm) injection-molded belt slot
•Available in Black Ballistic Weave finish
7001 AccuMold
®
Thumbsnap
•Suitable for both outdoor and concealment
applications, this holster rides at a 10- to 13˚
cant for a fast, instinctive draw
•Thumb snap design incorporates the Bianchi®
Adjust-A-Strap™ feature to ensure a secure fit
over the hammer
•Contour molded high-density trilaminate
AccuMold® construction for an exacting fit
•Coptex™ 100% polyknit inner lining for a smooth
draw
•1.75" (45 mm) injection-molded belt slot
•Available in Black Ballistic Weave finish
7201 Training Belt 1.75" (45 mm)
•Four-part laminate for long-lasting shape and exceptional durability
PROTECTIVE GEAR
•Unique Adjust-A-Strap™ thumb break closure
for secure retention
7000 AccuMold
PATENTED
FIREARMS ACCESSORIES
PATENTED
•Hook and loop closure for quick on/off ease
•Firm polyethylene center strip sandwiched between a high-density
foam, with a ballistic weave outer and a durable nylon lining
LESS LETHAL
See page 111 for AccuMold magazine pouches
FORENSICS
™
•Comfortably carries one or two firearms in
its dual, thickly padded sleeves
•Roomy interior pocket for cleaning
accessories, etc., and elastic web loops for
magazines or other equipment
4451 Deluxe Pistol Case
•A slim, portfolio design featuring
wraparound web carry handles and an
outside essentials pocket
•Constructed of 750-denier fabric with a
cushioned padding to protect the firearm
•Constructed of 750-denier fabric with a
cushioned padding to protect the firearm
•Thick, dense padding to cushion and
protect firearm
• Conveniently zips open flat to use as a range pad
•Conveniently opens flat to use as a
shooting rest or pad
4452
4451
•Constructed of 750-denier fabric with a
cushioned padding to protect the firearm
•Thick, dense padding cushions and
protects firearm
•Outside zippered pocket for small
essentials
•Opens flat to use as a shooting rest or pad
•Fits most popular revolvers and pistols
4450
•Convenient carry handle
bianchi-intl.com bianchicowboy.com
137
TRAINING GROUP
•Features outside carry strap for hearing
protectors
4450 Pistol Case
ARMOR SYSTEMS
4452 Range Portfolio
BIANCHI COWBOY
®
Revisit the handcrafted glory of the Old West with our line of cowboy gear and enjoy the quality of our
world-famous genuine leather holsters and belts. We use only premium grade, full grain, vegetabletanned cowhide – the highest quality, most expensive leather. Developed and used by the world-class
shooters of Team Bianchi, this is authentic cowboy gear that was designed to perform both in and
out of the arena. Above all, it carries the legendary name Bianchi® and is designed and produced in
America. Visit bianchicowboy.com for more product information on these fine Western rigs.
SMOKECHASER™
•Designed for mounted shooting with a hidden tension
adjustment to provide a customized smooth draw and a
weight lifter style elongated back for support
•Strongside holster provides 10˚ cant, cross draw 20˚
•Holster is reinforced with corrosion-resistant steel and
welt area is double stitched with heavy nylon thread for
added strength
•Suede lining in holster and belt for better grip while
riding and performing in matches
•Two-piece 2" wide belt available in either straight or 1.5"
drop design
•Full grain floral embossed cowhide with snake pattern
lambskin insert; available in Black or Cognac, floral
finish
SMOKECHASER
PATH BLAZER™
•Designed for mounted shooting with a hidden tension
adjustment to provide a customized smooth draw and a weight
lifter style elongated back for support
•Strongside holster provides 10˚ cant, cross draw 20˚
•Holster is reinforced with corrosion-resistant steel and welt
area is double stitched with heavy nylon thread for added
strength
safariland.com 800.347.1200
•Suede lining in holster and belt for better grip
while riding and performing in matches
138
•Two-piece 2" wide belt available in either straight
or 1.5" drop design
•Premium grade full grain cowhide with basketweave insert;
available in Chestnut Tan or Black, plain finish
PATH BLAZER
ARMOR
Introducing the Kenda Lenseigne Signature Series by Bianchi® Cowboy.
Developed by Kenda Lenseigne, first ever female Overall World and National
Champion and holder of six world records, along with the Bianchi Cowboy
Shooting Team, the signature series encompasses every design aspect
required for record breaking mounted shooting performance.
FIREARMS ACCESSORIES
GETAWAY™
BIANCHI
Photo by Yamil Sued
DUTY GEAR
Kenda Lenseigne
•Designed for mounted shooting with a hidden tension
adjustment to provide a customized smooth draw and a
weight lifter style elongated back for support
•Strongside holster provides 10˚ cant, cross draw 20˚
•Holster is reinforced with corrosion-resistant steel and
welt area is double stitched with heavy nylon thread for
added strength
•Suede lining in holster and belt for better grip while
riding and performing in matches
PROTECTIVE GEAR
•Two-piece 2" wide belt available in either straight or 1.5"
drop design
•Premium grade, full grain cowhide; Chestnut Tan or
Black, plain finish
GETAWAY
LESS LETHAL
FORENSICS
Cattle Driver™
•Designed for mounted shooting with a hidden
tension adjustment to provide a customized smooth
draw and a weight lifter style elongated back for
support
•Strongside holster provides 10˚ cant, cross draw 20˚
•Holster is reinforced with corrosion-resistant steel
and welt area is double stitched with heavy nylon
thread for added strength
•Two-piece 2" wide belt available in either straight or
1.5" drop design
•Premium grade full grain cowhide; Chestnut Tan
with tan/white cow hard inserts or Plain Black with
black/white cow hair inserts
bianchi-intl.com bianchicowboy.com
139
TRAINING GROUP
CATTLE DRIVER
ARMOR SYSTEMS
•Suede lining in holster and belt for better grip while
riding and performing in matches
Hondo™
•Designed for mounted shooting with a hidden
stainless tension adjustment to provide a
customized, smooth draw with a 35˚ angle
front and back
•Holster is reinforced with corrosion-resistant
steel and welt area is double stitched with
heavy nylon thread for added strength
•Suede lining in holster and belt for better grip
while riding
•Adjustable for cross draw carry
•Belt is fancy stitched and padded for comfort,
and is 2.25" (58 mm) wide with tapered ends
•Premium grade full grain cowhide; available
in Chestnut Tan or Plain Black finish
California Outlaw™
•Smooth, full grain leather lining in holster for a quicker draw
•Hidden tension adjustment to provide a customized, smooth draw
•Suede lined belt is 2.25" (58 mm) wide with billet ends; choose
cartridge loops for .38 or .45 Long Colt
•Cross draw holster is available as an optional second holster;
order California Outlaw™ CD Holster
safariland.com 800.347.1200
•Premium grade full grain cowhide; available in Chestnut Tan or
Plain Black finish
140
Clearwater™
ARMOR
•Holster and belt feature a smooth, full grain
leather lining for a quicker draw and sturdiness
on the hip
•Multi-angle belt loop for customized strong side
and cross draw carry
•Hidden stainless tension adjustment for a
customized, smooth draw
•Belt loop adjusts 35˚ forward and rearward for
cant customization and personalized draw
BIANCHI
DUTY GEAR
•Belt is 2.25" (58 mm) wide with tapered ends;
choose cartridge loops for .38 or .45 Long Colt
•Select a second Clearwater holster to use as
cross draw or for use as dual strongside holster
•Premium grade full grain cowhide; available in
Chestnut Tan or Plain Black finish
•Classic Drop Loop-style cowboy rig with suede lined belt
and leather lined holster
•Holster has a smooth leather lining for a rapid draw and
is worn completely vertical
•Reinforced with corrosion-resistant steel with flared top
for faster, instinctive re-holstering
•Belt is 3" (76 mm) wide with billet ends; choose cartridge
loops for .38 or .45 Long Colt
•Cross draw holster is available as an optional second
holster
•Premium grade full grain cowhide; available in Chestnut
Tan or Plain Black finish
PROTECTIVE GEAR
•Stitched with heavy nylon thread for added strength
FIREARMS ACCESSORIES
Gold Miner™
LESS LETHAL
Texas Outlaw ™
•Classic drop loop-style cowboy rig with suede lined belt
and steel lined holster
•Smooth leather lined for a rapid draw
FORENSICS
•Reinforced with rawhide to hold the holster open with a
flared top for faster, instinctive re-holstering
•Belt is 3" (76 mm) wide with billet ends; choose cartridge
loops for .38 or .45 Long Colt
•Cross draw holster is available as an optional second
holster; order Texas Outlaw™ CD Holster
•Premium grade full grain cowhide; available in Chestnut
Tan or Plain Black finish
ARMOR SYSTEMS
bianchi-intl.com bianchicowboy.com
141
TRAINING GROUP
Dave Anderson AKA July Johnson
DUTY GEAR
CONSUMER WARNING: READ IMMEDIATELY
Safariland and Bianchi holsters and duty gear products are designed to meet the demand for high-performance products for law enforcement and civilians. Fitted and used
properly, a holster is a valuable aid in carrying a firearm. Because holsters are used to carry firearms, however, any person purchasing or using a Safariland or Bianchi holster
should read and understand the following warnings and all instructions included with his or her holster, as well as be thoroughly familiar with the proper and safe use of his or her
firearm in the circumstances in which he or she is using it.
Close tolerances for holster/handgun fit require consistent handgun specifications and characteristics as well as extremely precise holster design. Safariland produces its
products in this manner of quality materials with efficiency and safety in mind. Although these warnings may not pertain to all Safariland products, or all circumstances, they
should be read prior to the purchase, sale or use of any Safariland or Bianchi product. Some products have special and/or supplemental instructions and/or safety information
that must be read prior to their use. Call Safariland at 800.347.1200 for copies of these materials.
TRAINING AND PRACTICE
Use of a handgun under any circumstance may be dangerous. SERIOUS INJURY OR EVEN DEATH may result without proper training in the safe handling of firearms. Proper
training should be obtained from an accredited firearms safety program conducted by competent, qualified instructors in the military, police academies or National Rifle
Association-affiliated instruction programs. A firearm should not be carried or used without a thorough knowledge of its characteristics and safe use in the circumstances in
which it is intended to be used. It is also the user’s responsibility to be certain that his or her firearm is in proper, safe operating condition.
We strongly recommend a regular holster practice regime be utilized to ensure the continued capabilities of both the Safariland product and its user. The Safariland Training
Group has many shooting courses available. Visit www.safariland.traininggroup for more information. Should you have any questions concerning your Safariland or Bianchi
products, call Safariland toll free at 800.347.1200.
PROPER HOLSTER FIT
NEVER PLACE A LOADED HANDGUN IN A HOLSTER WITHOUT FIRST TESTING FOR PROPER FIT WITH THE HANDGUN UNLOADED. Although Safariland attempts to provide
accurate information regarding which specific holster models were designed to accommodate a specifically identified handgun, or handguns, Safariland does not warrant the
accuracy of such information and specifically disclaims any responsibility or liability for, or consequences resulting from, errors or inaccuracies in such information. Users are
advised not to rely on such compatibility information but are advised to personally verify holster/handgun compatibility in each and every case using actual products.
Handgun manufacturers continually update manufacturing specifications in their quest for better products. These changes may occur one or more times within a particular
handgun model year, and make it difficult for proper handgun identification and holster fit.
The slightest change in handgun design can have a major safety effect on the close tolerance of Safariland duty gear products. These changes may not affect other holster
brands that do not maintain the Safariland Duty Gear high standards.
If the user has any questions or doubt concerning holster fit, contact Safariland immediately as to which version of a particular handgun you and/or your customer may possess
and its compatibility with Safariland or Bianchi holsters.
Be advised that it is the user’s responsibility to periodically check his or her holster and related hardware for proper fit and function. Should any product, including a Safariland or
Bianchi Duty Gear product, become worn, loose, broken, defective or ill-fitting, CEASE USE IMMEDIATELY.
OTHER VERY IMPORTANT WARNINGS
DO NOT use Safariland or Bianchi holsters with custom or modified guns or broken, worn or inferior manufactured guns, including guns that are not of original factory specifications.
DO NOT use after-market grips not manufactured by Safariland, grip adapters, target hammers, target triggers or trigger shoes. After-market handgun modifications may cause
improper holster fit and ACCIDENTAL HANDGUN DISCHARGE. Never attempt to modify Safariland or Bianchi duty gear products in any way.
Do not attempt to cock a handgun while holstered, as such cocking can cause severe damage to either the handgun or holster, or both, and may cause an ACCIDENTAL
DISCHARGE.
safariland.com 800.347.1200
Some users of certain handgun models insist on carrying the weapon in what is referred to as a cocked and locked condition (i.e., the gun is cocked with the safety engaged).
Safariland does not recommend or approve of any such practice, and advises against it. This condition for such handguns should be reserved only for the most advanced,
experienced and skilled professional shooters under conditions that require the handgun to be drawn and fired under extremely short time constraints. Carrying a handgun in this
condition INCREASES THE RISK OF ACCIDENTAL DISCHARGE. It should only be used by those who have the training and experience to recognize the inherent risks associated
with it.
304
It should be noted that NO HOLSTER IS COMPLETELY SNATCH-PROOF OR TAKEAWAY-PROOF. Therefore, the user must exercise extreme diligence at all times in any situation
where another person may attempt to take the user’s handgun. The handgun should be held in place by the user whenever vigorous activity, such as running, jumping, falling or
tumbling, is encountered or attempted. ALWAYS keep safety straps snapped if the holster is so equipped.
Keep thumb on back of hammer or slide when inserting handgun in holster to help ensure no movement occurs during insertion. Always keep fingers clear of trigger when
drawing or replacing handgun in holster. Place index finger on outside of trigger guard to avoid inadvertent strap or foreign object interference when reholstering.
For complete ordering instructions and additional information, please visit safariland.com/dutygear.
To ENsure Your Satisfaction
Your product is carefully crafted from the finest materials. For product longevity and your own safety, here are some commonsense guidelines:
Inspecting Your Product
1. Thoroughly read the safety information in this catalog and other information included with your purchase.
2. Make sure your handgun fits properly, safely and to your satisfaction.
3. Visually inspect your handgun for any defects in material or workmanship.
4. Check the retainer strap, spring or other retaining device and be certain that your handgun is properly and safely secured for your application.
5. Visually inspect all stitchings, snaps, springs, clips and rivets for looseness, breakage or other damage.
6. Pay special attention to points of strain and critical points, such as belt loops, welts, retainer straps, springs or other retaining devices.
7. Look for any sign that leather or other materials have become dry or brittle.
8. Should your holster or other product become worn, loose, defective or ill-fitting, cease use immediately.
Care and Storage
Leather
Storage
Store your leather product in a cool, dry place. High humidity can cause mildew, while dry heat and direct sunlight can cause drying and cracking. If you leave your handgun in
the holster or other product, check it daily for moisture, condensation or corrosion. Changing atmospheric conditions, heavy perspiration and other factors could create such
conditions.
Care
Treat the interior of your holster with spray silicone to help protect against excess moisture. Spray silicone also speeds the draw by reducing friction.
If your product becomes water-soaked, reshape it as best you can and allow it to air-dry at room temperature. Do not use a hot oven – it will shrink, harden and crack the leather.
Because Bianchi leather is hand finished with our special leather dressing, should your leather product become dry or scratched, you can treat the exterior with a commercial
leather dressing that does not contain lacquer. (Be careful when using Neat’s foot oil; large amounts will soften the leather.)
Brass cartridges or other brass hardware when stored with leather will acquire a greenish residue called “verdigris.“ It is a natural product of a chemical reaction between brass
and vegetable-tanned leather, and it wipes off. (Using nickel-plated cartridges in belt loops will avoid this condition.)
SafariLaminate™, AccuMold®, AccuMold® Elite™ and PatrolTek™
Storage
These products have been field-proven to withstand a wide variety of environmental conditions. These products should be stored in a cool, dry environment when not in use. We
do not recommend storing these products in a vehicle trunk or other areas where extreme heat can exceed the outside environment.
Never store your SafariLaminate products near a heat source that emits high temperatures (200°F), which can deform or destroy the polymer from which many SafariLaminate
products are manufactured. If you have accidentally exposed your equipment to a heat source you should immediately remove it from the area, allow it to cool to room
temperature and then operate it to ensure correct function.
Cleaning
These products are best cleaned with a solution of warm, soapy water and a soft brush. A toothbrush and dish soap work well. If decontamination is required, an antibacterial
soap or 10% solution of household chlorine bleach may be used. After cleaning, simply rinse off with fresh water and let air-dry. Be sure the product is completely dry inside and
out prior to use.
When these products are exposed to salt spray or immersed in salt water, it is important to thoroughly rinse them in warm water as soon as possible. Never use solvents such as
acetone to clean AccuMold products, as this could result in damage to the product.
How to Measure Barrel Length
Before you order a holster, please be sure you have the correct barrel measurement for your handgun. This measurement is very easy to do, and it will ensure that you get the
holster that’s exactly right for your gun.
4"
Revolvers – Measure barrel length from
the face of the cylinder to the muzzle.
5"
Semiautomatics – Measure
barrel length from the rear
portion of the ejection port to
the muzzle.
safariland.com
305
1785 SAVES AND COUNTING
13386 International Parkway • Jacksonville, FL 32218
800.347.1200 • Outside of the USA, call 904.741.5400
SAF 12/11
©2012 Safariland