Sanitizer Series Literature - EDS Pumps and Water Treatment Ltd

AWP1054SE1/
*AWP1054SE1-HS
AWP1354SE1/
*AWP1354SE1-HS
AWP1465SE1/
*AWP1465SE1-HS
AWP1665SE1/
*AWP1665SE1-HS
Maximum
22600 @ 15.9
36900 @ 21.2
52000 @ 30.0
67000 @ 9.0
Medium
20700 @ 12.4
33600 @ 15.9
47000 @ 22.0
60000 @ 29.0
Minimum
16400 @ 6.1
28300 @ 9.5
40000 @ 13.0
51000 @ 17.0
Efficiency (gr./lb) @
Lowest Setting
2700
3100
3100
3000
Amount of Media
0.04 m3 (1.5 ft3)
0.07 m3 (2.5 ft3)
0.10 m3 (3.5 ft3)
0.13 m3 (4.5 ft3)
Maximum Water Hardness
30 gpg
40 gpg
50 gpg
50 gpg
2Maximum
Iron
10 ppm
15 ppm
15 ppm
15 ppm
pH Required
6.0
6.0
6.0
6.0
SE1
1CAPACITY:
3Minimum
(Grains/lbs. NACL)
4Total
pH Adjusted
510
863
1030
1380
5Peak
Flow Rate @ 15 psid
17.0 gpm @ 7.8 psid*
19.0 gpm @ 7.6 psid*
19.0 gpm @ 7.6 psid*
19.0 gpm @ 7.6 psid*
Continuous Flow Rate @ 5 psid
9.0 gpm @ 2.8 psi
9.0 gpm @ 2.7 psi
9.0 gpm @ 2.7 psi
9.0 gpm @ 2.7 psi
Water Pressure Range
25-100 psi
25-100 psi
25-100 psi
25-100 psi
Water Temperature
0.5-37.7 C (33-100 F)
0.5-37.7 C (33-100 F)
0.5-37.7 C (33-100 F)
0.5-37.7 C (33-100 F)
Electrical Requirements
110 V/50-60 Hz
110 V/50-60 Hz
110 V/50-60 Hz
110 V/50-60 Hz
Connections
3/4” brass
3/4” brass
1” brass
1” brass
Media Tank (w x h)
25.4 cm x 157.5 cm
(10” x 62”)
33.0 cm x 157.5 cm
(13” x 62”)
35.5 cm x 185.4 cm
(14” x 73”)
40.6 cm x 185.4 cm
(16” x 73”)
Brine Tank (w x h)
45.7 cm x 91.4 cm
(18” x 36”)
45.7 cm x 102 cm
(18” x 40”)
45.7 cm x 102 cm
(18” x 40”)
45.7 cm x 102 cm
(18” x 40”)
Shipping Weight
63.5 kg (140 lbs)
99.8 kg (220 lbs)
116.3 kg (256 lbs)
141.4 kg (311 lbs)
AWP1054SE2/
*AWP1054SE2-HS
AWP1354SE2/
*AWP1354SE2-HS
AWP1465SE2/
*AWP1465SE2-HS
AWP1665SE2/
*AWP1665SE2-HS
Maximum
34800 @ 15.9
60300 @ 26.5
84000 @ 37.0
108000 @ 48.0
Medium
32000 @ 12.4
48300 @ 15.9
68000 @ 22.0
87000 @ 29.0
Minimum
22900 @ 6.1
28200 @ 9.3
40000 @ 13.0
51000 @ 17.0
Efficiency (gr./lb) @
Lowest Setting
3800
3000
3100
3000
Amount of Media
0.04 m3 (1.5 ft3)
0.07 m3 (2.5 ft3)
0.10 m3 (3.5 ft3)
0.13 m3 (4.5 ft3)
Maximum Water Hardness
60 gpg
80 gpg
80 gpg
80 gpg
2Maximum
10 ppm
15 ppm
15 ppm
15 ppm
Minimum pH Required
7.0
7.0
7.0
7.0
5Peak
SE2
1CAPACITY:
O
O
O
O
O
O
O
O
(Grains/lbs. NACL)
Iron
17.0 gpm @ 9.1 psid*
19.0 gpm @ 8.6 psid*
19.0 gpm @ 8.6 psid*
19.0 gpm @ 8.6 psid*
Continuous Flow Rate @ 5 psid
Flow Rate @ 15 psid
8.0 gpm @ 3.7 psi
9.0 gpm @ 2.8 psi
9.0 gpm @ 2.8 psi
9.0 gpm @ 2.8 psi
Water Pressure Range
25-100 psi
25-100 psi
25-100 psi
25-100 psi
Water Temperature
0.5-37.7 C (33-100 F)
0.5-37.7 C (33-100 F)
0.5-37.7 C (33-100 F)
0.5-37.7 C (33-100 F)
Electrical Requirements
110 V/50-60 Hz
110 V/50-60 Hz
110 V/50-60 Hz
110 V/50-60 Hz
Connections
3/4” brass
3/4” brass
1” brass
1” brass
Media Tank (w x h)
25.4 cm x 157.5 cm
(10” x 62”)
33.0 cm x 157.5 cm
(13” x 62”)
35.5 cm x 185.4 cm
(14” x 73”)
40.6 cm x 185.4 cm
(16” x 73”)
Brine Tank (w x h)
45.7 cm x 91.4 cm
(18” x 36”)
45.7 cm x 102 cm
(18” x 40”)
45.7 cm x 102 cm
(18” x 40”)
45.7 cm x 102 cm
(18” x 40”)
Shipping Weight
63.5 kg (140 lbs)
99.8 kg (220 lbs)
116.3 kg (256 lbs)
141.4 kg (311 lbs)
O
O
O
O
O
O
O
O
*SULPHUR REDUCTION – For applications requiring the additional removal of Hydrogen Sulphide up to 1ppm (sulphur or “rotten egg’ smell), special systems are available which include KDF media between
the gravel underbed and the Crystal-Right® media. 1All Advanced Water Products Water Conditioners are pre-factory set at medium salting. Note: influent waters must be at least 3gpg and have a TDS of
80ppm. A calcite or corsex unit may be needed for correct operation. 2Iron removal may vary depending on form of iron, pH and other local conditions. On waters that are pre-chlorinated or where other
pre-oxidation occurs, an iron precipitate can form that is too small to be filtered. 3The pH listed is the minimum for the influent water. 4Optimum pH adjustment occurs at 3.0 gpm or less at maximum salt
settings. 5Unit not tested for capacity at these flow rates. Water quality may vary.
SE1, SE2
425 Clair Rd. W, Guelph, Ontario, Canada N1L 1R1
t. (+1) 519.763.1032 • tf. 1.800.265.7246 (US and Canada only) • f. (+1) 519.763.5069
t. +31 73 623 8116 (Europe only) • e-mail: [email protected] www.viqua.com
Sanitizer® Series Water
Conditioners are certified by
Baumback Labs
LIT-0504157 Printed in Canada. Copyright ©2010 VIQUA - a Trojan Technologies Company. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the written permission of VIQUA.
PROTECT YOUR WATER SYSTEM
Minerals and bacteria can enter your
household water through a ground aquifer or
the well. Many of these contaminants can
end up trapped in your home’s water softener
system and, in most cases, cannot be
completely removed through normal system
regeneration.
Now you can enjoy clean, softened water
throughout your house thanks to an advanced
line of self-sanitizing water treatment
systems – the Sanitizer Series®.
The Sanitizer Series systems are ideal
for all households using well water. It is
the only water conditioner of its kind that
provides comprehensive softening, plus
iron and manganese removal, all in a single
process. At the same time, the entire system
disinfects itself automatically with every
regeneration.
Sanitizer Series: SE1, SE2
• SE1 - 4-in-1 system removes hardness, iron, manganese and
raises your water pH, all in a single pass.
The Self-Chlorinating Water Conditioner
Integral chlorine
generator
Protective cover
Includes 15'
of brine drain line
• SE2 - 4-in-1 system design removes hardness, iron
and manganese, and reduces ammonia, all in a single pass.
• No other equipment add-ons required. This single system
design maximizes water pressure throughout your home.
• Cleans and sanitizes itself automatically using the
Advanced Water Products chlorine generator: No chemicals,
additives or special handling required.
• Odours and problems caused by iron and sulphur bacteria
are virtually eliminated.
• Advanced, solid-state “system analyzer” (patent pending) monitors
and communicates operating modes, even alerts you to low salt
conditions.
THE SECRET TO THESE
SYSTEMS LIES IN TWO
SPECIALLY ENGINEERED
ADVANCED WATER PRODUCTS
TECHNOLOGIES.
Sanitizer Series softeners give you the industry’s
most advanced control and operating features:
• Safe, low-voltage operation.
Plastic by-pass and 3/4"
brass sweat yokes
1. VIQUA's Advanced Water Products’ new
chlorine generator is a patented device
that uses the existing brine solution to
generate controlled amounts of chlorine
to safely sanitize and disinfect the entire
system. There are no special chemicals to
add, no special salts to use, no additional
equipment to purchase. The sanitizing
action takes place automatically every time
the system regenerates.
2. The Sanitizer Series uses
Crystal-Right™ media (CR100/CR200),
a unique silica crystal media that can soften
the water, remove high amounts of iron
and manganese, and even reduce ammonia
through a simple regeneration with salt.
Crystal-Right is also the only softening
media in use today that will not be
damaged by chlorine.
The Sanitizer Series is the only multi-purpose water
treatment system that effectively removes hardness,
iron and manganese; raises pH; and disinfects itself
automatically during regeneration.
• Full 1“ porting throughout the system - means the highest
service flows with the least amount of pressure drop.
• Proprietary fully electronic metered valve with “system day over-ride”.
• All regeneration cycles are custom programmed for your
specific water problems.
• User friendly design makes the Sanitizer Series systems easy
to operate and maintain.
• Also available - units with KDF 85 media for Hydrogen Sulphide
reduction (up to 1ppm, order -HS).
EFFECTIVELY USED TO:
• Remove hardness
• Remove iron
• Reduce turbidity
• Remove manganese
• Reduce sulphur
• Reduce unpleasant tastes and odours
Cl
Na
Cl
Na
Cl
Cl