2009 Catalog

Transcription

2009 Catalog

09
COBRA GOLF 1818 ASTON AVENUE CARLSBAD, CA 92008 1.800.917.3300
www.cobragolf.com
©2009 Acushnet Company. Acushnet Co. is an operating company of Fortune Brands, Inc. NYSE: FO. Graphite Design, Golf Pride,
AccuSport Speed Monitor, Winn Grip, Fujikura Vista, True Temper, Aldila, Nippon and Mitsubishi Rayon are trademarks of
Graphite Design International, Inc., Eaton Corporation, AccuSport International Inc., Winn Inc., Fujikura Rubber Ltd., True Temper
Sports Technologies, Aldila Inc., Nippon Shaft Company, Ltd., and Mitsubishi Rayon Company, Ltd., respectively.
1 // Cobra® Product Guide 2009
2009 S9-1 Drivers // 2
ne w
2 0 0 9
THE ALL-NEW
S9-1 DRIVERS.
PICK YOUR LEVEL
OF FIREPOWER.
Speed Tuning
While the technology available in Cobra’s
2009 line of drivers is impressive, it isn’t
fully maximized until it’s paired with the
right player type and the right ball speed.
To find out which driver maximizes your
swing, simply determine average ball
speed, swing speed or drive distance and
refer to the chart below. It only takes a
few steps to unleash the full performance
of a Cobra driver, while tapping the full
potential of your game.
S peed
T uning
AVERAGE DRIVE 265 + yards
220 - 275 yards
250 yards or less
SWING SPEED
104 + mph
87-108 mph
97 mph or less
BALL SPEED
150 + mph
125-155 mph
140 mph or less
S9-1 Pro Drivers are tuned to give extreme-ball-speed
players high launch, low spin and added workability to
optimize their distance and accuracy.
Tuned to optimize fast-ball-speed players’ distance
and accuracy by providing a slight draw-bias ball
flight, high launch and low-to-mid spin.
Tuned to give moderate-ball-speed players unmatched
distance and forgiveness, via maximum-draw-bias
head design and lighter shafts, promoting extra-high
launch and mid spin.
2009 S9-1 Drivers // 4
technology
ne w
2 0 0 9
SWINGWEIGHT SCREW
THE PROS WANTED IT ALL.
WE DELIVERED.
Square Face Alignment
Working in close collaboration with Cobra PGA Tour Professionals, we developed the S9-1 Pro
Drivers to be a major weapon off the tee for extreme-ball-speed players. The advancements
begin with our COR-boosting Hotter 9 Points face technology and continue with a lightweight
carbon composite crown, swingweight screw, two face configurations (Deep and Shallow) and
three loft options – all of which are geared toward enhanced performance and customization.
These drivers also feature a new clubface shape that transfers energy to the ball with maximum
efficiency. And with its tour-inspired clubhead and black finish, you’ll feel complete confidence
starting with your first drive.
Hotter 9 Points
and Large Face
with milled
Dual Rhombus
Face Insert
S9-1 Pro Technology
HOTTER 9 POINTS AND Large Face with milled Dual Rhombus Face Insert
Cobra’s enhanced Hotter 9 Points technology is integrated with our exclusive Milled
Dual Rhombus Face Insert, promoting higher ball speeds and more consistent flight
across the entire clubface.
lightweight COMPOSITE CROWN
The lightweight composite crown frees up discretionary weight, optimizing CG,
increasing MOI and generating faster ball speed.
Square Face Alignment
The traditional top-down profile provides an open alignment at address.
SWINGWEIGHT SCREW
A factory-installed swingweight screw enhances speed tuning, allowing further
customization with a wide range of custom shafts. Additionally, the screw
placement on the sole of the club moves more weight down and back, lowering CG.
lightweight COMPOSITE CROWN
2009 S9-1 Drivers // 6
ne w
HOTTER 9 POINTS.
MADE EVEN HOTTER
FOR COBRA TOUR PROS.
Accomplished players need exacting tools to fully maximize their high level of skill. With its
high-efficiency clubface and ball-flight-optimizing swingweight screw, the S9-1 Pro D features
a deep face design that generates high launch and low spin, while the Pro S produces
high launch and low-to-mid spin. And no matter which model you choose, you’ll get all the
advantages of our COR-boosting Hotter 9 Points and fast ball speeds.
Specification Profile:
// HEAD VOLUME/FACE ANGLE: 460cc/Pro S – 1.5° Open, Pro D – 2.0° Open
// LOFT: 8.5°, 9.5°, 10.5°
// SHAFT: Cobra/Matrix Ozik Xcon 6
// GRIP: Cobra Speed/Golf Pride New Decade 50 D (Durometer)
Player Profile:
// C URRENT AVERAGE DRIVE: 265 + YARDS
// CURRENT SWING SPEED: 104+ MPH
// CURRENT BALL SPEED: 150 + MPH
S9 -1 Pro S
S9-1 Pro D
Cobra/Matrix Ozik Xcon 6
S9 -1 Pro D
Cobra/Golf Pride New Decade 50 D
(Durometer)
Generates high launch and low spin
to promote lower ball flight.
S9 -1 Pro S
Generates high launch with low-to-mid
spin to promote higher ball flight.
2 0 0 9
2009 S9-1 Drivers // 8
technology
Front nine. Back nine.
Dominated by the hotter 9.
ne w
2 0 0 9
Traditional Head Shape
With the all-new S9-1 Drivers, we’ve enhanced our Hotter 9 Points technology to further increase
clubface efficiency. We started by designing the face shape with a 1:1 length-to-width ratio,
allowing for a more efficient transfer of energy from the clubface to the ball. This refined
Hotter 9 Points technology is also integrated with our Milled Dual Rhombus Face Insert, which
maximizes COR for higher ball speeds and more consistent ball flight across the entire clubface.
And with the S9-1 Drivers’ Frequency Tuned internal crown rib geometry, you'll produce drives
that sound and feel as satisfying as they look.
S9 -1 Technology
HOTTER
9 POINTS and
large face
with milled
dual rhombus
face insert
HOTTER 9 POINTS AND Large Face with milled Dual Rhombus Face Insert
Designed to maximize COR, the reengineered Hotter 9 Points technology incorporates
our Dual Rhombus Face Insert to promote higher ball speeds and more consistent flight
across the entire clubface. The face shape is designed towards a 1:1 length-to-width
ratio, which provides maximum energy transfer from the clubface.
Frequency Tuning
Internal crown rib geometry makes the S9-1 the best sounding driver
we’ve ever made.
Traditional HEAD SHAPE
The new, more traditional clubhead design instills confidence at address and
enhances clubface efficiency by pinpointing more energy directly behind the ball.
Enhanced Speed tuning/discretionary weighting
Internal club weighting and the speed-tuned shaft optimize ball speed and
ball flight for each type of player.
ENHANCED
SPEED TUNING/
DISCRETIONARY
WEIGHTING
FREQUENCY TUNING
2009 S9-1 Drivers // 10
ne w
A BLAZING-HOT CLUBFACE
TO MATCH BLAZING-FAST
BALL SPEEDS.
With the new S9-1 F Driver, the faster the ball speeds, the greater the rewards. Precision tuned
for fast-ball-speed players, this driver utilizes our refined Hotter 9 Points technology to exploit
and maximize COR. To further increase efficiency, the clubface shape has been adjusted
toward a 1:1 length-to-width ratio, putting more energy directly behind the ball. This focused
technology promotes more consistent ball flight and greater accuracy, while the incredibly
lightweight clubhead and longer shaft help generate blazing-fast ball speeds. In short, the
S9 -1 F will put fast-ball-speed players where they deserve to be – deep down the middle of
the fairway.
// HEAD VOLUME/FACE ANGLE: 460cc/Slight Draw Bias
// LOFT: 9.5°, 10.5°
// SHAFT: Cobra/Aldila DVS-HL, 55g
// GRIP: Cobra/Golf Pride New Decade 50 D (Durometer)
Speed Tuning Player Profile:
// C URRENT AVERAGE DRIVE: 220 -275 YARDS
// CURRENT SWING SPEED: 87-108 MPH
// CURRENT BALL SPEED: 125-155 MPH
Cobra/Aldila DVS-HL, 55g
(Durometer)
2 0 0 9
2009 S9-1 Drivers // 12
ne w
Convert moderate ball
speeds into massive drives.
Moderate-ball-speed players can now hit drives that are anything but moderate. The S9-1 M
Driver uses our revamped Hotter 9 Points technology to take advantage of the impact dynamics
of each and every swing. That means you'll have not one, but nine points along the clubface
where COR is maximized, generating higher ball speeds and more consistent ball flight – even
on ball strikes that are less-than-perfect. And the draw-biased head design and lightweight
shaft help keep the clubhead square at impact, allowing the full power of the Hotter 9 Points
to take effect. Available in Straight Neck (SN) and Offset (OS) head designs.
// HEAD Volume/FACE ANGLE: 460cc/Draw Bias
// LOFT: Straight Neck – 10.5°, 11.5°; Offset – 9.5°, 10.5°
// SHAFT: Cobra/Aldila DVS-HL, 50g
// GRIP: Cobra/Golf Pride New Decade 50 D (Durometer)
Speed Tuning Player Profile:
// CURRENT AVERAGE DRIVE: 250 YARDS or less
// CURRENT SWING SPEED: 97 MPH or less
// C URRENT BALL SPEED: 140 MPH or less
(Durometer)
Also available in an Offset model.
2 0 0 9
fair w ay
2009 S9-1 Drivers // 14
m etals
ne w
POWER DESIGNED FOR
THE TEE BOX, DIALED IN
FOR THE FAIRWAY.
The all-new S9-1 Fairway Metals include Hotter 9 Points technology for more COR across the
entire clubface. Additionally, the large footprint and shallow face with constant thickness
push CG lower and MOI higher, further increasing launch and forgiveness. The result of all
this technology: Easy-to-hit fairway metals that bring any green within reach.
Pro
Matrix Ozik Xcon
(Durometer)
F Speed-Tuned
(Durometer)
M Speed-Tuned
(Durometer)
Shallow Face Design
Shallow face design increases MOI and positions
the CG low and back for optimal performance.
2 0 0 9
2009 L5V Driver // 16
Scientifically engineered
For insanely long,
straight Drives.
The L5V driver, Our longest, straightest driver with two adjustable
settings to optimize your personal ball flight.
Engineered to produce drives that are longer and straighter than ever, the multi-material L5V
not only possesses the largest, most forgiving clubface in golf, it also features our Adjustable
Flight Technology. All this gives you the power and versatility to maximize your personal driving
distance. In short, going big just got a lot easier.
1,0
LARGEST FACE IN GOLF
You’re looking at the largest, most forgiving
clubface in golf, and because it’s equipped with
Cobra’s proven Dual Rhombus Face Insert
Technology, you’ll experience powerful drives
across the entire face.
Multi- material Technology
The L5V clubhead features ultra-lightweight carbon
composite crown and sole inserts that allow Cobra
engineers to shift the CG lower and further back
for super-high MOI, high launch and lower spin,
maximizing distance and accuracy.
Adjustable Flight Technology
To optimize your personal ball flight and shape,
L5V Drivers feature an exclusive hosel design that
allows you to adjust from the Standard Factory
setting (0) to an Increased Draw-Biased setting (1).
SPEED TUNING
Each L5V Driver shaft is engineered to optimize ball
speed for specific player types: X (extreme-ball-speed
players), F (fast-ball-speed players) and M (moderateball-speed players).
2009 L5V Driver // 18
technology
technology
SWINGWEIGHT SCREW
Maximum COR across
the face. More distance
down the fairway.
The swingweight screw helps balance the clubhead with
the shaft. Each swingweight screw is specifically weighted
for X, F or M stock Diamana Red Board Shafts. All custom
shafts are available with a custom weighted screw to
maintain ideal swingweight.
Hosel Screw Port
Every L5V comes equipped with
a proprietary L5V torque wrench.
By inserting the wrench into the
hosel screw port, you can perform
two functions: Adjust the ball
flight and change the shaft.
It’s the largest clubface in golf for a reason – longer, straighter,
incredibly forgiving drives.
The L5V has the largest clubface in golf, providing maximum COR across the face and extreme
forgiveness. It also features lightweight carbon composite crown and sole inserts to maximize
MOI and shift CG lower to promote high launch and low spin – for longer, straighter drives.
Another key feature of the L5V is the exclusive hosel design, which you can adjust to optimize
your personal ball flight and also accommodate more than 30 available custom shaft options.
CARBON COMPOSITE CROWN AND SOLE
The carbon composite crown and sole inserts are not only
ultra-lightweight, they are designed to shift the CG lower
and further back to provide high MOI and high launch, as
well as optimal spin.
Largest clubface with dual rhombus Face Insert technology
The L5V not only has the industry’s largest clubface, it also features Cobra’s proven Milled
Dual Rhombus Face Insert. Together, these design features further optimize ball speed by
generating maximum COR across the entire face. Translation: Longer, straighter drives.
ADJUSTABLE flight Technology
With the L5V torque wrench, you can quickly and easily change your ball
flight characteristics. The “0” setting on the hosel is for Standard Flight,
while the “1” setting promotes Increased Draw-Biased Flight. The system
also allows you to change shafts to further customize the driver.
speed
2009 L5V Driver // 20
tuning
speed
tuning
A fine-tuned approach
to Speed Tuning.
The L5V driver is available in three speed-tuned configurations
to optimize ball speed for each player type.
Since every player and every game is different, the L5V is Speed Tuned to provide you
with a driver that’s optimized for consistently longer, straighter drives. By defining your
ball speed, swing speed or driving distance, you can be matched with the ideal clubhead,
loft, shaft and shaft weight, which will optimize your personal ball speed to maximize your
distance and accuracy.
*
AVERAGE DRIVE: 265+ yards
SWING SPEED: 104+ mph
BALL SPEED: 150+ mph
LOFT: 8.5°
Adjustable flight Setting:
Neutral (0) to Slight Draw (1)
The X Speed shaft and the 8.5°
clubhead loft are tuned to give players
with extreme ball speeds high launch,
low spin and added workability – for
optimized distance and accuracy.
*The X Speed model is only available
through custom order.
AVERAGE DRIVE: 220-275 yards
SWING SPEED: 87-108 mph
BALL SPEED: 125-155 mph
LOFT: 9.5° / 10.5°
Neutral (0) to Increased Draw (1)
AVERAGE DRIVE: 210-250 yards
SWING SPEED: 76-97 mph
BALL SPEED: 110-140 mph
LOFT: 11.5°
Increased Draw (0) to Maximum Draw (1)
The F Speed clubhead comes in two
lofts (9.5° and 10.5°), which, along
with the F Speed shaft, are tuned for
fast-ball-speed players, providing
them high launch and low-to-mid spin
for longer, more accurate drives.
Designed for moderate-ball-speed
players, the lightweight M Speed shaft
and 11.5° clubhead loft provide extrahigh launch and mid spin, generating
increased distance and forgiveness.
2009 L5V Driver // 22
A D J U S T M E N T S
The power to longer,
straighter drives Now
rests in your hands.
To adjust the face setting/ball flight
The King Cobra L5V™ Driver utilizes an exclusive hosel sleeve with two built-in face settings:
Standard (0) and Increased Draw-Bias (1). Each driver is factory set in the Standard position
(0 – pointing toward target).
Customize your shaft.
Further optimize your game.
To CHANGE the SHAFT
The King Cobra L5V™ Driver offers the ability to easily interchange the factory-installed shaft with
any available* customized shaft. Follow these steps to customize your King Cobra L5V Driver:
1 – I nstall the customized replacement shaft
This technology allows you to adjust between a Standard and Increased Draw-Bias ball flight
by following these simple steps:
a Securely hold the clubhead in one hand and the Cobra torque wrench in the
opposite hand. Note which number on the hosel sleeve is facing forward, 0 or 1.
Be sure to install your new shaft in the same orientation.
b Loosen the clubhead by inserting the wrench bit into the hosel screw and
rotating counterclockwise until the shaft can be removed.
1 Securely hold the clubhead in one hand, and the Cobra torque wrench in
the opposite hand.
Hosel Sleeve
1
0
c Install the customized replacement shaft in the desired face angle setting
(see Step 3 of “To Adjust the Face Setting”).
2 Loosen the shaft by inserting the wrench bit into the hosel screw from the
soleplate and rotating counterclockwise until the shaft can be removed.
Note: Insert torque wrench directly into the hosel screw to avoid damaging
the screw head. It is not necessary to completely remove the hosel screw to
rotate the shaft. Simply loosen the screw enough to clear the hosel sleeve
keyed features.
d Tighten the hosel screw by inserting the wrench bit into the hosel screw and
rotating clockwise until the torque wrench clicks once. The audible click ensures that
the screw has been installed correctly. Do not over- or under-tighten the hosel screw.
3 Turn the shaft 180˚ and insert back into the clubhead. The markings on
the hosel sleeve indicate the face setting:
2 – Install the corresponding swingweight screw**
a Securely hold the clubhead in one hand and the Cobra torque wrench in the
opposite hand.
‘0’ facing target – Standard Face setting
‘1’ facing target – Increased Draw-Bias Face setting
b Loosen the swingweight screw by inserting the wrench bit into the
swingweight screw and rotating counterclockwise until the screw can be
loosened by hand.
4 Tighten the screw by inserting the wrench bit into the hosel screw and
rotating clockwise until the torque wrench clicks once. The audible click
ensures that the screw has been installed correctly. Do not over- or undertighten the hosel screw.
Note: If the torque wrench does not click, your L5V clubhead is not properly
tightened and may not perform as designed.
Ball Flight
1,0
c Install the new swingweight screw by aligning the threads of the screw with
the threads of the L5V clubhead.
Swingweight Screw
d Tighten the swingweight screw by inserting the wrench bit into the head and
rotating clockwise until the torque wrench clicks once. The audible click ensures that
the screw has been installed correctly. Do not over- or under-tighten the hosel screw.
Note: Do not attempt to clean or remove the red substance off of the hosel and
swingweight screw threads. Doing so may cause the screws to loosen over time.
2009 L5V Driver // 24
IMPORTANT
* In order to utilize your custom L5V shaft, it must be factory-fitted with an L5V hosel adapter sleeve. Never
use your L5V Driver without a Cobra hosel adapter sleeve installed. You must purchase the custom shaft
through a local Cobra dealer.
** To achieve the proper swingweight, it is extremely important that you install the corresponding swingweight
screw, which was provided with your driver shaft.
(1) The King Cobra L5V Driver fully conforms to the Rules of Golf approved by the USGA and R&A. According
to the Rules of Golf, Rule 4-2a, neither the swingweight screw nor the face setting may be adjusted during
a round of golf: “During a stipulated round, the playing characteristics of a club must not be purposely
changed by adjustment or by any other means.” (2) Do not attempt to loosen or tighten the hosel screw and/
or the swingweight screw with any tool other than the Cobra torque wrench. Doing so may cause damage to
the screw heads. Improper installation of the hosel screw or the swingweight screw could potentially cause
harm. (3) Carefully inspect the hosel and swingweight screws prior to each round of golf, or practice session
to ensure that they are secured to the clubhead. Failure to do so may: (a) Cause the screws to rattle loose
during the course of use, in turn causing the club to become nonconforming according to Appendix II, 4a of the
Rules of Golf. (b) Allow foreign materials into the screw threads, causing harm to the screw housings. (4) Do
not attempt to clean or remove the red substance off of the hosel and swingweight screw threads. Doing so
may cause the screws to rattle loose over time. (5) Do not substitute non-Cobra components for any of those
provided (including heads, shafts or coupling nuts) or use Cobra components of other manufacturers.
L5V REPLACEMENT ACCESSORIES
L5V Replacement Accessories are available through your local golf retailer. For more information,
visit cobragolf.com/L5V.
Torque Wrench
Swingweight Screw
L5V Swingweight
screw kit – additional
swingweight screws in 2g,
6g, 10g weights
2009 Baffler ® Utility Metals // 26
ne w
2 0 0 9
THE TRIPLE WEIGHTING
SYSTEM: THREE REASONS WHY
ITS REIGN WILL CONTINUE.
CONTOUR Sole
Drawing on the success of the award-winning Baffler DWS, Cobra engineers have taken
the science of developing superior performing utility metals to a new level. Introducing the
new 2009 Baffler TWS, which stands for Triple Weighting System. By incorporating a third
weight, we’ve engineered these new Bafflers to have the optimal balance of higher MOI and
lower CG, producing the best performing Baffler we’ve ever made. Once again, we’ve given
golfers of all skill levels the ability to strike with confidence and consistently place the ball
exactly where it needs to go.
BAFFLER TWS FEATURES:
PERFORMANCE BENEFITS:
// Triple Weighting System
// W
eight is pushed back and to the periphery for a deep CG
and increased MOI.
// L arge Face Area with a
Maraging Steel Face Insert*
// P lasma-welded face insert maximizes ball speed across the
entire face.*
// Fastback Crown Design
// Design shifts CG low and back for higher launch.
// Contour Sole
// Improved versatility for a wide range of lies and playing conditions.
// Premium Aldila DVS-HL 65
// Optimizes launch and trajectory.
Player Profile:
Triple WEIGHTING SYSTEM
Baffler utility metals were the best-selling utility metals in
the combined on- and off-course channels from March 2006
to December 2008, according to Golf Datatech.
// D esigned for all player types looking for a versatile, easy-to-hit alternative to long irons.
// A vailable in 1 / R (16.0°), 2 / R (18.0°), 3 / R (20.0°), 4 / R (23.0°), 5 / R (26.0°)
and 6 / R (29.0°) models.
Premium Aldila DVS-HL 65 Shaft
*Only available in models 1/R – 4/R.
2009 Baffler ® Utility Metals // 28
THE PERFECT CLUB FOR
OVERCOMING IMPERFECT LIES.
This specially engineered utility metal is the result of a collaboration between Cobra’s Tour staff
and the Cobra R&D team. It features a more compact profile with a Tour-preferred setup, plus
a laser-welded 275 maraging steel face insert – which promotes higher ball speeds across
the face for more distance. In addition, a swing weight adjustment screw promotes neutral
weighting and trajectory.
BAFFLER PRO FEATURES:
// Compact Head Design
// N ew compact profile and shallower face height for improved
shot-making.
// Tour-preferred Setup
// P romotes preferred trajectory and workability that
accomplished players demand.
// Swing Weight Adjustment Screw
// P ositioned for neutral ball flight and allows for swing weight
adjustment on custom shaft orders.
// Longer Hosel
// L ie angle can be adjusted on custom orders.
// F ujikura Speeder Graphite or
Dynamic Gold S300 Steel Shaft
// Stiff, low-torque shaft for more distance and accuracy.
Swing Weight Adjustment Screw
(for custom shaft orders)
Longer Hosel
COMPACT head design with
TOUR-Preferred Setup
Player Profile:
// Designed
for accomplished players looking for an advanced technology, long-iron
alternative built specifically to promote optimal launch.
// A vailable in 1 / R (16.0°), 2 / R (18.0°), 3 / R (20.0°) and 4 / R (23.0°) models.
Fujikura Speeder Graphite or
Dynamic Gold S300 Steel Shaft
2009 King Cobra® Irons // 30
it’s amazing how
something so precise
can be so forgiving.
Wide-Sole Design with Tungsten
Heel-Toe Weighting
By far Cobra’s most technologically advanced irons, UFi Irons stand for Ultimate Forgiveness. Designed
using multi-material integration, these irons feature an exclusive Metal Matrix Face Insert, patented
polymer topline, high-density tungsten heel-toe weighting and steel alloy body. Combined, these
technologies deliver Cobra’s highest MOI and lowest CG ever. UFi is, indeed, the Ultimate Forgiveness iron.
UFi FEATURES:
// M
etal Matrix Face Insert
// Proprietary Metal Matrix Face Insert is a nine-metal alloy that’s
65% lighter than steel and 35% lighter than titanium. This
allows more weight to be shifted to the perimeter of the clubhead,
providing high MOI for ultimate forgiveness, along with an ultrasoft feel that’s similar to a forged iron.
// Polymer Topline
// T his patented design technology removes mass from the topline,
promoting a lower CG for higher launch and improved feel.
// W
ide-Sole Design with Tungsten
Heel-Toe Weighting
// H eel-toe weight distribution for high MOI and low-back CG for
maximum forgiveness, high launch and superior distance.
// Urethane Insert and
Back Cavity Plate
// T hese two technologies work in concert with the Metal Matrix
Face Insert and polymer topline to provide amazingly soft feel.
// P remium Graphite Design
YS-55+, YS-60+ or
Nippon N.S. 900 XH Shafts
// Higher launch, greater control and accuracy.
Back Cavity Plate
Polymer Topline
Metal Matrix
Face Insert
Player Profile:
// D esigned for players looking for the ultimate in forgiveness, distance and feel.
// M
en’s set includes 4 – GW.
Graphite Design YS-55+, YS-60+
or Nippon N.S. 900 XH Shafts
Cobra/Golf Pride Tour Velvet 50 D
(Durometer)
Urethane Insert
Ultimate FORGIVENESS,
distance and feel
Premium Graphite Design YS-55+, YS-60+
or Nippon N.S. 900 XH shafts
build a better game
with multi-material
construction.
Wide-Sole, Low-Profile
Head Design
Cobra’s engineers made the award-winning S9 Irons even better. The expanded three-piece
polymer topline and urethane sole insert optimize discretionary weighting for a lower CG
and higher MOI, offering higher launch, greater distance and more accuracy. Combine that
with the club’s low profile and wide sole with a chamfer relief design – and you gain improved
versatility and more forgiveness.
S9 FEATURES:
// W
ide-Sole, Low-Profile
Head Design
// E xtreme low-back CG and high MOI for high launch, greater
distance and maximum forgiveness.
// Three-Piece Polymer Topline
// L ightweight polymer in the topline allows for 13 grams of weight
to be redistributed lower in the heel and toe – for an extreme
low-and-back CG and enhanced feel.
// B ack Cavity Plate,
Urethane Insert
// A long with the polymer topline, these technologies enhance feel,
while the lightweight urethane insert allows for 10-20 grams of
weight to be redistributed to the heel and toe to maximize MOI.
// P remium Graphite Design YS or
Nippon N.S. 900 XH Shafts
// Higher launch, greater control and accuracy.
Back Cavity Plate
Three-Piece
Polymer Topline
Player Profile:
// Designed for players who want maximum accuracy, distance and feel.
// Men’s set includes 4 – GW.
Premium Graphite Design YS
Urethane Insert
(Durometer)
Maximum accuracy,
distance and feel
Premium Graphite Design YS
A LOW-PROFILE clubhead
designed FOR
HIGH-PROFILE SHOTS.
ne w
2 0 0 9
Wide-Sole,
Low-Profile
HeaD Design
Heel-toe
Weighting
Low and wide. Those are the key words for the new 2009 SZ Irons. Their sleek, low-profile
head design and shortened hosel result in low-and-back CG, while MOI is maximized
through a wide sole and heel-toe weighting system. This will help you achieve higher
launch and pinpoint accuracy – the best of both worlds. And thanks to a full-cavity back
and urethane back cavity insert, you’ll experience improved ball strikes along with that
legendary Cobra feel.
SZ FEATURES:
// W
ide-Sole, Low-Profile
Head Design
// E xtreme low, back Center of Gravity (CG) and high
Moment of Inertia (MOI) for high launch, greater distance
and maximum forgiveness.
// Heel-Toe Weighting
// Higher inertia for greater forgiveness and accuracy.
// F ull Back Cavity Plate
with Urethane Insert
// Provides enhanced feel.
// P remium Aldila DVS-HL or
Nippon N.S. 1030H Shafts
// L ightweight shaft generates faster clubhead speeds for higher
launch, increased distance and accuracy.
Full Back Cavity Plate
with urethane-backed insert
Player Profile:
// Designed for players who want superior forgiveness, distance and accuracy.
// Men’s set includes 3 – GW.
Premium Aldila DVS-HL 70-A or
Cobra/Nippon N.S. 1030H Shafts
Premium Aldila DVS-HL or
Nippon N.S. 1030H Shafts
(Durometer)
SUPERIOR forgiveness, DISTANCE and accuracy
ne w
2 0 0 9
Not just a transition.
A transformation
of your game.
utility metals (3-5)
Utility Metals have a wide-sole, low-crown
design for low-back CG and increased MOI.
The 2009 Transition-S Men’s integrated set offers even more forgiveness for maximum game
improvement. The men’s set includes 3 – PW and comes with standard flex Aldila VS PROTO-HL
lightweight shafts for high launch to promote increased carry distance.
Utility Metal FEATUres:
PERFORMANCE BENEFITS (Nos. 3-5):
// W
ide-Sole, Low-Crown Design
// Low-back CG and high MOI to maximize forgiveness and launch.
// O ffset Hosel
// Enhanced draw-biased ball flight.
Hybrid Iron Features:
PERFORMANCE BENEFITS (Nos. 6,7):
// H ollow Body Construction
// H igh MOI for greater accuracy.
// L ow-Profile,
Back-Weighted Design
// Higher launch to increase carry distance.
// Increased Heel-Biased CG
// Enhanced draw-biased ball flight for accuracy.
// W
ide, Rounded Sole
// Improved turf interaction.
Wide-sole Iron Features:
PERFORMANCE BENEFITS (Nos. 8-SW):
// C avity-Back, Wide-Sole Design
// L ow-back CG for optimum launch and more forgiving
turf interaction.
// Urethane-Filled Back Cavity
// Ultimate soft feel.
hybrid
irons (6, 7)
Hybrid Irons feature a hollow,
back-weighted, low-profile
design for improved accuracy.
WIDE-SOLE
irons (8-SW)
Irons feature wide-sole, deep CG
cavity back design for maximum
forgiveness and optimum launch.
Player Profile:
// Designed for moderate-ball-speed players seeking ultimate forgiveness, carry distance and accuracy.
// Available in Men’s, Women’s and Seniors’.
Men’s model shown. Men’s set includes 3-PW. Seniors’ and Women’s set includes 4-SW.
Craftsmanship. Feel.
And the ability to place
the ball exactly where
you want it.
Not only played
by our tour pros.
Inspired by our
tour pros.
Designed with input from Cobra’s Tour staff, the Pro CB Irons deliver superior feel
and workability. With a forged cavity back, shorter hosel and lower CG, these irons
have been engineered for a high ball flight, while the rounded sole camber improves
turf interaction. It’s Tour-caliber technology with one thing in mind – putting the ball
exactly where you want it.
Created in collaboration with Cobra’s Tour pros, the Pro MB Irons give accomplished players the soft
feel of forged 1020 carbon steel along with the refinement that comes with superior engineering.
The longer hosel is ideal for players who prefer a high degree of ball control, while the thin
topline and rounded sole camber further aid control and feedback. The end result: Solid striking
muscle-back irons with the kind of high level of playability that Cobra Tour pros are raving about.
Pro CB FEATURES:
PRO MB FEATURES:
PERFORMANCE BENEFIT:
// Forged 1020 Carbon Steel
// Tour soft, solid, powerful feel.
// Forged 1020 Carbon Steel
// Soft, solid, powerful feel.
// C avity-Back Design
// W
eight is positioned behind the hitting
area for solid feel and workability.
// Muscle-Back Design
// W
eight is positioned behind the hitting
area for solid feel and workability.
// T hin Topline with Minimal
Offset and Narrow Sole
// T hin Topline with minimal offset and
narrow sole provides workability with
some forgiveness.
// T hin Topline with Minimal
Offset and Narrow Sole
// T hin topline, minimal offset and
narrow sole allow the skilled player
to control the ball.
// Shortened Hosel
// P ositions CG for high-launch trajectory
for accomplished players.
// Tour-Designed Hosel
// C G is positioned for mid-launch
preferred by accomplished golfers.
// Round Sole Camber
// Improves turf interaction
// Narrow, Rounded Sole
// Improves turf interaction.
// R oyal Precision Rifle
Project X 5.5 Steel Shaft
// O ptimizes feel and control, and
promotes higher launch.
// P remium True Temper Dynamic // C lassic Tour-proven shaft for optimal
Gold S300 Steel Shaft
accuracy and control.
Royal Precision Rifle
Project X 5.5 Steel Shaft
True Temper Dynamic Gold
S300 Steel Shaft
(Durometer)
(Durometer)
2009 King Cobra® Seniors’ // 40
Experienced players
can now experience
more distance, accuracy
and forgiveness.
seniors’ S9 Irons
Our most technologically advanced irons for seniors,
S9 Irons are the ultimate player-improvement irons.
They feature an extreme low-and-back Center of
Gravity (CG) for greater distance and accuracy with
high launch. A back cavity plate, polymer topline and
urethane insert dampen vibrations and soften their
feel. The multi-material, wide-sole design maximizes
MOI for unlimited forgiveness, power and feel.
Available in 5 – SW with premium Graphite Design
YS shafts.
seniors’ S9-1 Drivers
and FAIRWAY METALS
Generating lots of power just got a lot easier. The
S9-1 Senior Driver features Cobra’s Hotter 9 Points
face technology, which is designed to push COR
and forgiveness to the maximum. The CG is deep and
low thanks to a lightweight titanium clubhead, which
helps to provide high launch with improved ball flight
and spin. And its forgiving offset draw-biased design
and optimal loft serve to enhance the performance of
each and every swing.
seniors’ SZ Irons
Forgiveness and performance come together in the
2009 SZ Seniors’ Irons. A low-profile clubhead
takes CG to extreme lows, while heel-toe weighting
boosts MOI, generating higher launch and maximum
forgiveness. And with a full-cavity back and
urethane-backed insert, the SZ Irons have a soft,
controlled feel to match their high level of
performance. Available in 5 – SW with premium
Cobra/Aldila DVS-HL shafts.
seniors’ Baffler® TWS utility metals
Put difficult-to-play long irons out of service with the
2009 Baffler TWS. Moderate-swing-speed players will
now experience increased forgiveness and accuracy,
thanks to a large clubface design and a fast-back
crown. While a third weight placed along the back
of the club lowers CG and maximizes MOI, making
the already easy-to-hit Baffler even better. It’s an
upgrade with a big upside.
seniors’ TRANSITION-S SET
The 2009 Transition-S Seniors’ set is easy to hit and
even more forgiving for maximum game improvement.
The seniors’ set includes 4 – SW and features lite flex
Aldila VS PROTO-HL lightweight shafts for high launch
and greater carry distance.
WIDE-SOLE
irons (8-SW)
Irons feature wide-sole,
deep CG cavity-back design
for maximum forgiveness
and optimum launch.
hybrid
irons (6, 7)
Hybrid Irons feature a
hollow, back-weighted,
low-profile design for
improved accuracy.
utility
metals (3-5)
Utility Metals have a
wide-sole, low-crown
design for low-back CG
and increased MOI.
Cobra has a history of
making high-performance
clubs for women.
2009 King Cobra® Women’s // 42
WOMEN’S S9 Irons
Whatever the problem, these irons have a solution.
With an extreme low-and-back CG and high launch,
S9 Irons keep the ball in the air longer. Cobra’s
made a lot of great irons for women, but these are
our most technologically advanced irons for women.
The multi-material, wide-sole design maximizes MOI
for maximum forgiveness, power and feel. Available
in 5 – SW with premium Graphite Design YS shafts.
Women’s S9-1 Drivers
and FAIRWAY METALS
Sleek design meets deft power, forgiveness and
pinpoint accuracy in the S9-1 Women’s Driver and
Fairway Metals. Both feature our reengineered Hotter
9 Points technology, resulting in high COR across the
entire clubface – for shots that are as forgiving as
they are powerful. And with an offset design and loft
options of 11.5° (straight neck) and 13.5°, you'll be
able to get the ball up in the air and way down the
fairway. Every time.
WOMEN’S SZ Irons
No matter what challenge you face, the 2009 SZ Irons
make good shots happen. We took CG to new lows
and MOI to new heights for increased launch and
forgiveness. We also added urethane inserts and a
full-cavity back to continue Cobra’s legacy of superior
feel and playability. Performance, forgiveness,
accuracy and feel – they’re everything you need to
feel confident while aiming toward the pin. Available in
5 – SW with premium Cobra/Aldila DVS-HL shafts.
Women’s Baffler® TWS utility metals
Featuring the same award-winning combination of feel and
control as the proven Baffler DWS, the new Baffler TWS
makes it even easier to leave behind those difficult-to-hit
long irons. Utilizing a new Triple Weight System and large
clubface, this utility metal is designed to maximize MOI and
create a low-and-back CG. These improvements, combined
with a low-profile head design, produce higher launch and
greater carry distance – even on the most difficult shots.
WOMEN’S TRANSITION-S SET
The 2009 Transition-S Women’s set is amazingly easy
to hit, helping women achieve maximum distance and
accuracy. The women’s set includes 4 – SW and comes
with Women’s flex Aldila VS PROTO-HL lightweight
shafts for higher launch and maximum carry distance.
WIDE-SOLE
irons (8-SW)
Irons feature wide-sole,
deep CG cavity-back design
for maximum forgiveness
and optimum launch.
hybrid
irons (6, 7)
Hybrid Irons feature a
hollow, back-weighted,
low-profile design for
improved accuracy.
utility
metals (3-5)
Utility Metals have a
wide-sole, low-crown
design for low-back CG
and increased MOI.
2009 Optica™ Putters // 44
Superior Alignment.
Superior Feel. And,
OF Course, Fiber optics.
SL-01
SL-01 women’s
When you see the line better, you putt better.
SL-02
SL-03
SL-03
SL-03 women’s
SL-04
OPTICA SL™ PUTTERS
The Optica SL™ Putters feature superior alignment, feel and
a consistent, true roll. The key to superior alignment lies in the
exclusive TruGlo® fiber-optic sight line, which helps you line up
your putts with a new level of precision. Combining premium
tri-material construction, Winn custom grips and True Temper
shafts, these putters offer forgiveness, confidence and,
ultimately, fewer putts. Available in six models: the heelshafted SL-01, SL-03 and SL-05; and the center-shafted SL-02,
SL-04 and SL-06, plus two Women’s models: SL-01 and SL-03.
SL-03 women’s
SL-05
SL-06
SL-05
2009 Accessories // 46
Style, on and
off the course.
Innovative, functional, lightweight and exceptionally stylish.
10" STAFF BAG
GT STAND BAGS
// R etail version of the new 2009 Cobra
PGA Tour bag
// N ew design made of high-quality ballistic nylon
and carbon fiber construction
// 7 pockets (including new magnetic pocket
closure) plus 2 insulated beverage pockets
// 6-way top
// 8 pockets (including new magnetic pocket)
plus insulated beverage pocket
// P added shoulder strap with 3-point sling
suspension. Includes umbrella loop, rain
hood, towel ring and ergonomic rubber handle
// N ew 7-way top, dual padded shoulder strap,
umbrella loop, towel ring
// N ew “integrated” stand design prevents legs
from crossing. External tee holders. All-new base
// Weight: 11.5 lbs
// W
eight: 5.5 lbs
// Available color: Black/Yellow
// A vailable colors: White/Yellow, Red/White/Blue,
Silver/Navy, Black/White, Black/Yellow
GT CART BAGS
SPORT STAND BAGS
// N ew design made of high-quality ballistic
nylon and carbon fiber construction
// A ll-new design with enhanced styling
// 8 pockets (including new magnetic pocket)
plus insulated beverage pocket and internal
organizer pockets
// Unique 14-way organizer top. Dual handle
grabs. Padded shoulder strap. External tee
holders. New dual-density base
// Weight: 8 lbs
// A vailable colors: Black/Yellow, White/Yellow,
Silver/Navy
// 7 pockets, including full-length apparel
pockets, plus insulated beverage and
valuables pocket
// N ew “integrated” stand design prevents
legs from crossing
// 5 -way top, dual padded shoulder strap
// W
eight: 4.5 lbs
// A vailable colors: Black/White, Yellow/White,
Navy/Charcoal, Pink/White, Black/Yellow,
SPORT CART BAGS
SUNDAY STAND BAG
// All-new design with enhanced styling
// A ll-new ultra-lightweight design
// 7 pockets, including 2 full-length
apparel pockets
// 5-way top, single padded shoulder strap
// N ew single padded shoulder strap
// Weight: 5.5 lbs
// Available colors: Black/White, Black/Yellow,
Yellow/White, Navy/Charcoal, Pink/White
// 4 pockets
// N ew, slightly larger 4-way top, molded
handle. Includes: umbrella loop, rain hood,
towel ring
// W
eight: 3.5 lbs
// Available color: Black/Yellow
2009 Accessories // 48
TOUR CAP
WOMEN’S GRAPHIC CAP
// S ame design as worn by the Cobra PGA
Staff Professional Geoff Ogilvy
// L ow profile, unstructured, adjustable, soft
washed cotton twill
// C ontrast stitch, unstructured, adjustable,
soft cotton twill
// S upports Susan G. Komen for the Cure with
pink ribbon for breast cancer awareness
// ProV1 and FJ logos on temples, S9-1 logo
on bill
// A vailable colors: Black, Chocolate, Light
Blue, Pink, White
// A vailable colors: Black, Red, Royal Blue,
Stone, Navy, White, Orange, Green, Yellow,
Light Blue, Pink
TOUR VISOR
WOMEN’S GRAPHIC VISOR
// S ame design as worn by Cobra PGA Staff
Professional Ian Poulter
// L ow profile, adjustable, soft washed
cotton twill
// Contrast stitch, adjustable, soft cotton twill
// S upports Susan G. Komen for the Cure with
pink ribbon for breast cancer awareness
// ProV1 and FJ logos on temples, S9-1 logo
on bill
// A vailable colors: Black, Chocolate, Light
Blue, Pink, White
// A vailable colors: Black, Red, Royal, Stone,
Navy, White, Orange, Green, Yellow,
Light Blue, Pink
PERFORMANCE MESH FITTED CAP
// S ame design as worn by Cobra PGA Staff
Professionals Jason Gore and J.B. Holmes
// L ightweight, breathable performance mesh.
Produced for Cobra by New ERA
// Fitted S/M, M/L, L/XL
// A vailable colors/sizes: Black S/M, M/L, L/XL;
Red M/L, L/XL; Navy M/L, L/XL;
White S/M, M/L, L/XL
N
ITIO
D ED
E
T
I
LIM
COBRA MILITARY CAP
// S ame design as worn by Cobra PGA
Staff Professional Camilo Villegas
// F itted (elastic stretch band),
soft cotton twill
// L imited edition: available while
supplies last
// A vailable colors: Black, Royal Blue, Red,
Yellow, White
BALL MARKER CAP
TOUR UMBRELLA
// N ew custom Cobra ball marker with
magnetic field built into the bill provides a
seamless transition from cap to green
// S ame Gustbuster double-canopy umbrella
used by Cobra PGA Tour Staff
// Produced for Cobra by New ERA
// A vailable color: Black/Yellow
// 62" Black with Cobra logos
washed cotton twill
// A vailable colors: Black, Red, Navy, Stone,
Green, Yellow, Light Blue, White
SNAKE ICON CAP
TOUR TOWEL
washed cotton twill
// Same towel as used by Cobra PGA Tour Staff
// Available colors: Navy, Brown, Olive, Stone
// 20"
x 39" Jacquard cotton, web loop center
strap, hemmed edges for durability
// A vailable color: Black/Yellow
2009 Club Specifications // 50
KING COBRA S9-1 Pro drivers // Men’s Specifications
KING COBRA S9-1 PRO fairway metals // Men’s Specifications
S9-1 pro D (DEEP FACE)
S9-1 Pro
Head Material: 6-4 Titanium with Milled Dual-Rhombus Face Insert and Carbon Composite Crown
Grip: Cobra/Golf Pride New Decade 50D Durometer Shaft: Matrix Ozik Xcon 6
Loft
Head Size/Face Angle
Length
Lie
Swing Wt
Shaft Wt
8.5°
9.5°
10.5°
460cc/1.5° Open
460cc/1.5° Open
460cc/1.5° Open
45.00"
45.00"
45.00"
D4
D4
D4
58.0°
58.0°
58.0°
65g
65g
65g
Stock Flex
RH/LH
S, X
S, X
S, X
RH
RH/LH
RH/LH
Stock Flex
RH/LH
S, X
S, X
S, X
RH
RH/LH
RH/LH
S9-1 Pro S (SHALLOW FACE)
Head Material: 6-4 Titanium with Milled Dual-Rhombus Face Insert and Carbon Composite Crown
Grip: Cobra/Golf Pride New Decade 50D Durometer Shaft: Matrix Ozik Xcon 6
Loft
Head Size/Face Angle
Length
Lie
Swing Wt
Shaft Wt
8.5°
9.5°
10.5°
460cc/1.5° Open
460cc/1.5° Open
460cc/1.5° Open
45.00"
45.00"
45.00"
D4
D4
D4
58.0°
58.0°
58.0°
65g
65g
65g
Head Material: 6-4 Titanium with Milled Dual-Rhombus Face Insert Grip: Cobra/Golf Pride New Decade 50D Durometer
Loft
Face Angle
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
45.50"
45.50"
D4
D4
55g
55g
Cobra/Aldila DVS-HL
Cobra/Aldila DVS-HL
R, S
R, S
Loft
Face Angle
Length
Swing Wt
Shaft Wt
Shaft Type
Stock Flex
-1.0°
-1.0°
45.50"
45.50"
D2
D2
50g
50g
Cobra/Aldila DVS-HL
Cobra/Aldila DVS-HL
R, S
R, S
Loft
Face Angle
Length
Swing Wt
Shaft Wt
Shaft Type
Stock Flex
-1.5°
-1.5°
45.50"
45.50"
D2
D2
RH/LH
RH/LH
RH/LH
50g
50g
Cobra/Aldila DVS-HL
Cobra/Aldila DVS-HL
R, S
R, S
3
5
7
3
5
7
D0
45g
15.5°
18.0°
21.0°
181cc
163cc
154cc
43.00"
42.50"
42.00"
RH
RH/LH
15.5°
18.0°
21.0°
159cc
149cc
139cc
43.00"
42.50"
42.00"
3
5
7
9
18.0°
21.0°
24.0°
27.0°
159cc
149cc
139cc
130cc
43.00"
42.50"
42.00"
41.50"
Cobra/Graphic Design Tour AD YS
Lite
44g
3
5
7
9
RH/LH
RH/LH
Women’s
RH/LH
RH/LH
S9-1/M offset women’s
Loft
Face Angle
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
13.5°
-2.0° Closed
44.00"
C5
44g
55g
55g
55g
R, S
R, S
R, S
RH/LH
RH/LH
RH/LH
57.0°
58.0°
59.0°
D1
D1
D1
50g
50g
50g
R, S
R, S
R
RH/LH
RH/LH
RH/LH
57.0°
58.0°
59.0°
59.0°
D0
D0
D0
D0
45g
45g
45g
45g
Lite
Lite
Lite
Lite
RH/LH
RH/LH
RH/LH
RH
S9-1/M OFFSET
18.0°
21.0°
24.0°
27.0°
159cc
149cc
139cc
130cc
42.00"
41.50"
41.00"
40.50"
L5V
Loft
Face Angle
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
C5
D2
D2
D2
KING COBRA S9-1 fairway metals // Women’s Specifications
S9-1/M straight neck women’s
44.00"
57.0°
58.0°
59.0°
Head Material: 17-4 Steel with Face Insert Grip: Cobra/Golf Pride New Decade 45D Durometer Shaft: Cobra/Graphite Design Tour AD YS
Model
Loft
Head Size
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
RH/LH
KING COBRA L5V Driver // Specifications
-2.0° Closed
RH/LH
RH/LH
RH/LH
S9-1/M OFFSET
KING COBRA S9-1 drivers // Women’s Specifications
11.5°
S, X
S, X
S, X
Head Material: 17-4 Steel with Face Insert Grip: Cobra/Golf Pride New Decade 45D Durometer Shaft: Cobra/Graphite Design Tour AD YS
Model
Loft
Head Size
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
RH/LH
Loft
Face Angle
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
45.50"
85g
85g
85g
KING COBRA S9-1 fairway metals // Senior’s Specifications
RH/LH
S9-1/M offset seniors’
-2.0° Closed
D3
D3
D3
57.0°
57.0°
58.0°
Head Material: 17-4 Steel with Face Insert Grip: Cobra Speed/Golf Pride New Decade 50D Durometer Shaft: Cobra/Aldila DVS-HL
Model
Loft
Head Size
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
RH/LH
RH/LH
RH/LH
RH/LH
KING COBRA S9-1 drivers // Seniors’ Specifications
11.5°
43.00"
43.00"
42.50"
KING COBRA S9-1 fairway metals // Men’s Specifications
S9-1/M Offset
9.5°
10.5°
181cc
163cc
154cc
Head Material: 17-4 Steel with Face Insert Grip: Cobra/Golf Pride New Decade 50D Durometer Shaft: Cobra/Aldila DVS-HL
Model
Loft
Head Size
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
RH/LH
S9-1/M straight neck
10.5°
11.5°
13.0°
15.0°
18.0°
S9-1/M OFFSET
S9-1/F
-0.5°
-0.5°
3+
3
5
S9-1/f
KING COBRA S9-1 drivers // Men’s Specifications
9.5°
10.5°
Head Material: 17-4 Steel with Face Insert Grip: Cobra Speed/Golf Pride New Decade 55D Durometer Shaft: Matrix Ozik Xcon
Model
Loft
Head Size
Length
Lie
Swing Wt
Shaft Wt
Stock Flex
RH/LH
Women’s
RH/LH
RH
56.0°
57.0°
58.0°
59.0°
C5
C5
C5
C5
45g
45g
45g
45g
Head Material: 6-4Ti Body with 6-4Ti Face Insert, Carbon Composite Crown and Sole Section
Grip: Cobra/Golf Pride New Decade 600R Shaft: Cobra/Mitsubishi Rayon Diamana Red Board
Face Angle
Model
“0”
“1”
Length
Swing Wt
Shaft Wt
Shaft Type
*8.5°
9.5°
10.5°
11.5°
1.0° 0.0°
-0.5° -1.5°
-1.0° -2.0°
-2.0° -3.0°
45.50"
45.50"
45.50"
45.50"
D3
D3
D3
D3
*The X speed model is only available through custom order.
Note: Lofts and shafts above can be interchanged through custom order.
60g
50g
50g
45g
Diamana Red Board X/Speed Tuned
Diamana Red Board F/Speed Tuned
Diamana Red Board F/Speed Tuned
Diamana Red Board M/Speed Tuned
Women’s
Women’s
Women’s
Women’s
RH/LH
RH/LH
RH/LH
RH
Stock Flex
RH/LH
S
R, S
R, S
R
RH
RH/LH
RH/LH
RH/LH
KING COBRA Baffler TWS // Men’s Specifications
KING COBRA S9 Irons // Men’s Specifications
Head Material: 17-4 Stainless Steel with Laser Welded 275 Maraging Steel Face Insert (1/R – 4/R); 17-4 Stainless Steel with Plasma Welded
Stainless Steel Face Insert (5/R – 6/R) Grip: Cobra/Golf Pride New Decade Shaft: Cobra/Aldila DVS-HL 65
Model
Loft
Lie
Length
Swing Weight Shaft Weight
Stock Flex
RH/LH
Head Material: 431 Stainless Steel with Polymer Topline, Urethane Sole Insert and Vibration Dampening Back Cavity Plate
Grip: Cobra/Golf Pride Tour Velvet 50D Shaft: Graphite: Cobra/Graphite Design YS, 55g; Steel: Nippon Pro 900 XH, 90g
Model
Loft
Lie
Offset
Length GR/ST
Swing Wt GR/ST
RH/LH
41.50"
41.00"
40.50"
40.00"
39.50"
39.00"
58.0°
58.5°
59.0°
59.5°
60.0°
60.5°
16.0°
18.0°
20.0°
23.0°
26.0°
29.0°
1/R
2/R
3/R
4/R
5/R
6/R
D2
D2
D2
D2
D2
D2
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
65g
65g
65g
65g
65g
65g
S
R, S
R, S
R, S
R, S
R, S
Shaft Weight
Stock Flex
RH/LH
60g
60g
60g
60g
Action
Action
Action
Action
RH/LH
RH/LH
RH/LH
RH/LH
KING COBRA Baffler TWS // Seniors’ Specifications
Head Material: 17-4 Stainless Steel with Plasma Welded Stainless Steel Face Insert
Grip: Cobra/Golf Pride New Decade 50D Shaft: Cobra/Aldila DVS-HL 60
Model
Loft
Lie
Length
Swing Weight
40.50"
40.00"
39.50"
39.00"
59.5°
60.0°
60.5°
61.0°
23.0°
26.0°
29.0°
32.0°
3/R
4/R
5/R
6/R
C9
C9
C9
C9
KING COBRA Baffler TWS // Women’s Specifications
Head Material: 17-4 Stainless Steel with Plasma Welded Stainless Steel Face Insert
Grip: Cobra/Golf Pride New Decade 45D Shaft: Cobra/Aldila DVS-HL 50
Model
Loft
Lie
Length
Swing Weight
39.50"
39.00"
38.50"
38.00"
37.50"
59.5°
60.0°
60.5°
61.0°
61.5°
23.0°
26.0°
29.0°
32.0°
35.0°
3/R
4/R
5/R
6/R
7/R
C4
C4
C4
C4
C4
Shaft Weight
Stock Flex
RH/LH
50g
50g
50g
50g
50g
L
L
L
L
L
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
KING COBRA Baffler PRO // Specifications
Head Material: Head Material: 17-4 Stainless Steel with Laser Welded 275 Maraging Steel Face Insert (1/R – 4/R); 17-4 Stainless Steel with Plasma
Welded 275 Maraging Steel Face Insert (5/R – 6/R)
Grip: Cobra/Golf Pride Tour Velvet 55D Round Shaft: Graphite: Cobra/Fujikura Speeder Baffler Pro; Steel: True Temper Dynamic Gold S300
Model
Loft
Lie
Length
Swing Weight Shaft Weight
Stock Flex
RH/LH
1/R Pro
2/R Pro
3/R Pro
4/R Pro
58.0°
58.5°
59.0°
59.5°
16.0°
18.0°
20.0°
23.0°
41.50"/41.00"
41.00"/40.50"
40.50"/40.00"
40.00"/39.50"
D3/D3
D3/D3
D3/D3
D3/D3
S
S
S
S
85/120g
85/120g
85/120g
85/120g
RH/LH
RH/LH
RH/LH
RH/LH
KING COBRA UFi IRONS // Specifications
Head Material: Metal Matrix Face Insert, High-Density Tungsten Heel-Toe Weights, Polymer Topline, Urethane Sole Insert and
Vibration Dampening Back Cavity Plate
Grip: Cobra/Golf Pride Tour Velvet 50D Shaft: Cobra/Graphite Design YS-60+(60g) Stiff flex, YS-55+(55g) Regular flex; Cobra/Nippon NS Pro 900 XH, 90g
Model
Loft
Lie
Offset
Length
Swing Weight
4
5
6
7
8
9
P
G
S
L
22.0°
25.0°
28.0°
31.5°
35.0°
39.0°
43.0°
48.5°
54.0°
59.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.5°
64.5°
64.5°
64.5°
0.260"
0.230"
0.210"
0.170"
0.130"
0.080"
0.060"
0.040"
0.040"
0.040"
38.50"
38.00"
37.50"
37.00"
36.50"
36.00"
35.75"
35.50"
35.25"
35.25"
D1
D1
D1
D1
D1
D1
D1
D3
D3
D3
3
4
5
6
7
8
9
P
G
S
L
20.0°
22.5°
25.5°
28.5°
32.5°
36.0°
40.0°
44.0°
49.0°
54.0°
59.0°
61.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.5°
64.5°
64.5°
64.5°
0.287"
0.278"
0.248"
0.227"
0.188"
0.147"
0.122"
0.080"
0.060"
0.060"
0.060"
39.00"/39.00"
38.50"/38.50"
38.00"/38.00"
37.50"/37.50"
37.00"/37.00"
36.50"/36.50"
36.00"/36.00"
35.75"/35.75"
35.50"/35.50"
35.25"/35.25"
35.25"/35.25"
D1/D1
D1/D1
D1/D1
D1/D1
D1/D1
D1/D1
D1/D1
D1/D1
D3/D3
D3/D3
D3/D3
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
KING COBRA S9 Irons // Seniors’ Specifications
Grip: Cobra/Golf Pride Tour Velvet 45D Shaft: Cobra/Graphite Design YS, 55g
Model
Loft
Lie
Offset
Length
Swing Weight
RH/LH
4
5
6
7
8
9
P
G
S
L
24.0°
26.5°
29.5°
33.0°
36.0°
40.0°
44.0°
49.0°
54.0°
59.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.5°
64.5°
64.5°
64.5°
0.278"
0.248"
0.227"
0.188"
0.147"
0.122"
0.080"
0.060"
0.060"
0.060"
38.50"
38.00"
37.50"
37.00"
36.50"
36.00"
35.75"
35.50"
35.25"
35.25"
C9
C9
C9
C9
C9
C9
C9
D0
D0
D0
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
KING COBRA S9 Irons // Women’s Specifications
Grip: Cobra/Golf Pride Tour Velvet 45D Shaft: Cobra/Graphite Design YS, 55g
Model
Loft
Lie
Offset
Length
Swing Weight
RH/LH
4
5
6
7
8
9
P
G
S
L
24.0°
26.5°
29.5°
33.0°
36.0°
40.0°
44.0°
49.0°
54.0°
59.0°
60.5°
61.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.0°
64.0°
0.278"
0.248"
0.227"
0.188"
0.147"
0.122"
0.080"
0.060"
0.060"
0.060"
37.50"
37.00"
36.50"
36.00"
35.50"
35.00"
34.75"
34.50"
34.25"
34.25”
C4
C4
C4
C4
C4
C4
C4
C5
C5
C5
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
Club Specifications // 54
KING COBRA SZ Irons // Men’s Specifications
KING COBRA Transition-S Set // Men’s Specifications
Head Material: 431 Stainless Steel, Back Cavity Plate with Urethane-Backed Insert
Grip: Cobra/Golf Pride New Decade 50D Shaft: Graphite: Cobra/Aldila DVS-HL 70-A, 70g; Steel: Cobra/Nippon N.S. Pro 1030H, 103g
Model
Loft
Lie
Offset
Length
Swing Weight
RH/LH
Head Material: 17-4 Stainless Steel Body (3-7); 431 Stainless Steel (8-SW)
Grip: Cobra/Golf Pride Tour Velvet Shaft: Cobra/Aldila VS PROTO-HL 65, 65g
Model
Loft
Lie
Offset
3
4
5
6
7
8
9
P
G
S
L
20.0°
23.0°
26.0°
29.0°
32.5°
36.0°
40.0°
44.0°
49.0°
54.0°
59.0°
61.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.5°
64.5°
64.5°
64.5°
0.290"
0.270"
0.250"
0.230"
0.200"
0.180"
0.160"
0.140"
0.120"
0.100"
0.100"
39.00"
38.50"
38.00"
37.50"
37.00"
36.50"
36.00"
35.75"
35.50"
35.25"
35.25"
D1
D1
D1
D1
D1
D1
D1
D1
D3
D3
D3
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
3
4
5
6
7
8
9
P
G
S*
20.0º
23.0º
26.0º
29.0º
33.0º
36.0º
40.0º
44.0º
50.0º
56.0º
58.5º
59.5º
60.5º
61.0º
62.0º
63.0º
63.5º
64.0º
64.0º
64.0º
0.240"
0.240"
0.240"
0.200"
0.200"
0.170"
0.130"
0.100"
0.090"
0.080"
KING COBRA Transition-S Set // Seniors’ Specifications
Grip: Cobra/Golf Pride New Decade 50D Shaft: Cobra/Aldila DVS-HL 65-A, 65g
Model
Loft
Lie
Offset
Length
Model
Loft
Lie
Offset
23.0°
26.0°
29.0°
32.5°
36.0°
40.0°
44.0°
49.0°
54.0°
59.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.5°
64.5°
64.5°
64.5°
0.270"
0.250"
0.230"
0.200"
0.180"
0.160"
0.140"
0.120"
0.100"
0.100"
38.50"
38.00"
37.50"
37.00"
36.50"
36.00"
35.75"
35.50"
35.25"
35.25"
Swing Weight
RH/LH
D0
D0
D0
D0
D0
D0
D0
D1
D1
D1
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
Grip: Cobra/Golf Pride New Decade 45D Shaft: Cobra/Aldila DVS-HL 50-L, 50g
Model
Loft
Lie
Offset
Length
23.0°
26.0°
29.0°
32.5°
36.0°
40.0°
44.0°
49.0°
54.0°
59.0°
60.5°
61.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.0°
64.0°
0.270"
0.250"
0.230"
0.200"
0.180"
0.160"
0.140"
0.120"
0.100"
0.100"
RH/LH
D1
D1
D1
D1
D1
D1
D1
D1
D1
D1
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
3*
4
5
6
7
8
9
P
G
S
23.0º
26.0º
29.0º
32.0º
36.0º
40.0º
44.0º
48.0º
52.0º
56.0º
58.5º
59.5º
60.5º
61.0º
62.0º
63.0º
63.5º
64.0º
64.0º
64.0º
0.240"
0.240"
0.240"
0.200"
0.200"
0.170"
0.130"
0.100"
0.090"
0.080"
Length
Swing Weight
RH/LH
41.00"
40.00"
39.00"
38.25"
37.50"
36.75"
36.25"
35.75"
35.50"
35.25"
C9
C9
C9
C9
C9
C9
C9
C9
C9
C9
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
Length
Swing Weight
RH/LH
40.00"
39.00"
38.00"
37.25"
36.50"
35.75"
35.25"
34.75"
34.50"
34.25"
C4
C4
C4
C4
C4
C4
C4
C4
C4
C4
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
*Model not included in set but available as individual club
KING COBRA SZ Irons // Women’s Specifications
4
5
6
7
8
9
P
G
S
L
Swing Weight
41.00"
40.00"
39.00"
38.25"
37.50"
36.75"
36.25"
35.75"
35.50"
35.25"
KING COBRA SZ Irons // Seniors’ Specifications
4
5
6
7
8
9
P
G
S
L
Length
37.50"
37.00"
36.50"
36.00"
35.50"
35.00"
34.75"
34.50"
34.25"
34.25"
KING COBRA Transition-S Set // Women’s Specifications
Swing Weight
RH/LH
C4
C4
C4
C4
C4
C4
C4
C5
C5
C5
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
Model
Loft
Lie
Offset
3*
4
5
6
7
8
9
P
G
S
23.0º
26.0º
29.0º
32.0º
36.0º
40.0º
44.0º
48.0º
52.0º
56.0º
57.5º
58.5º
59.5º
60.0º
61.0º
62.0º
62.5º
63.0º
64.0º
64.0º
0.240"
0.240"
0.240"
0.200"
0.200"
0.170"
0.130"
0.100"
0.090"
0.080"
KING COBRA PRO CB Irons // Specifications
Head Material: Forged 1020 Carbon Steel Grip: Golf Pride Tour Velvet Shaft: Royal Precision Rifle Project X 5.5 Steel Shaft, 118g
Model
Loft
Lie
Offset
Length
Swing Weight
RH/LH
2
3
4
5
6
7
8
9
P
G
19.0°
21.0°
24.0°
27.0°
30.0°
34.0°
38.0°
42.0°
46.0°
50.0°
60.0°
60.5°
61.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.0°
0.110"
0.105"
0.100"
0.095"
0.090"
0.085"
0.080"
0.075"
0.070"
0.070"
39.50"
39.00"
38.50"
38.00"
37.50"
37.00"
36.50"
36.00"
35.75"
35.50"
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
KING COBRA PRO MB Irons // Specifications
Head Material: Forged 1020 Carbon Steel
Grip: Cobra/Golf Pride Tour Velvet 0.600 Round 50D Shaft: True Temper Dynamic Gold S300 Steel Shaft, 130g
Model
Loft
Lie
Offset
Length
Swing Weight
2
3
4
5
6
7
8
9
P
G
60.0°
60.5°
61.0°
61.5°
62.0°
62.5°
63.0°
63.5°
64.0°
64.0°
19.0°
21.0°
24.0°
27.0°
30.0°
34.0°
38.0°
42.0°
46.0°
50.0°
39.50"
39.00"
38.50"
38.00"
37.50"
37.00"
36.50"
36.00"
35.75"
35.50"
0.110"
0.105"
0.100"
0.095"
0.090"
0.085"
0.080"
0.075"
0.070"
0.070"
RH/LH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
Optica Putter // Specifications
Head Material: 6061 Aluminum Stainless Steel Urethane Grip: Winn/Cobra Optica
Model
Head Type
Loft
Shaft
Length
Lie
RH/LH
01
01 Ladies
02
03
03 Ladies
04
05
06
Mallet
Mallet
Mallet
Mallet
Mallet
Mallet
Mallet
Mallet
3.0°
3.0°
3.0°
3.0°
3.0°
3.0°
3.0°
3.0°
Single Bend
Single Bend
Center Shaft
Single Bend
Single Bend
Center Shaft
Single Bend
Center Shaft
33.00"/34.00"/35.00"
33.00"
33.00"/34.00"/35.00"
33.00"/34.00"/35.00"
33.00"
33.00"/34.00"/35.00"
33.00"/34.00"/35.00"
33.00"/34.00"/35.00"
69.0°
71.0°
71.0°
69.0°
69.0°
71.0°
69.0°
71.0°
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
RH/LH
2009 Club Selector Guide // 58
Cobra club recommendations
Name Address R ight-Handed
Men’s
Left-Handed
Seniors’
Women’s
Driver
Model Loft Length Shaft Flex Grip Grip Size Comments (specify offset or straight neck) Irons
Model Set Composition Length Lie Angle Shaft Flex Grip Grip Size Comments Utility / fairway metals
FW Metal Models Shaft Grip Baffler Models Shaft Grip Length Flex Grip Size Length Flex Grip Size PUTTER/ACCESSORIES

2009 Catalog

Transcription

Similar documents

press release

Citizens Band Radios

KCB#41 JAN/FEB 09

COBRA Network Trophy Cases

electric announces gi joe goggle collaboration

November 2006 Newsletter

Center for Domestic Preparedness

Status of COBRA - SPring-8

Manual - Cobra

Radar detector Cobra Vedetta SLR 500 with LCD