CHIPPERS CHIPPER/SHREDDERS STUMP GRINDER EZ

®
A Breed Above The Best!
The broadest selection of chippers and chipper /shredders in the industry
CHIPPERS
pages 2-9
CHIPPER/SHREDDERS
pages 10-14
STUMP GRINDER
page 15
EZ TRIMMOWERS
pages 16-17
VACUUMS
pages 18-19
TRUCK LOADER
INSIDE 
page 20
www.BearCatProducts.com
9" HYDRAULIC FEED CHIPPERS
Heavy-Duty Steel and Two Engine Options
There isn’t much that can stand up to the
mighty Bear Cat 9" chippers. Based on a solid 4"
“C” channel frame with torsion axle suspension,
these machines make branches and trees up to 9"
in diameter disappear. Features include a 15"
diameter feed roller containing 10 knife blades,
four reversible chipping blades, adjustable
4-sided anvil and an 8" round discharge chute.
The 30" diameter, 1.25" thick dynamicallybalanced chipper disc weighs 275 lbs. and
produces tremendous chipping power.
A triple banded belt drive generates positive
power, and a hydrostatic feed control provides the
operator with infinite feed settings for all types
and sizes of debris. A telescoping tongue along
with torsion axle suspension make towing easy.
Service and maintenance is made easy by a hinged
disc cover.
With 18 gallons in the fuel tank, you’ll create
piles of chips between refills.
A digital programmable feed sensor and
hour meter are factory installed and
standard equipment on the 9" Bear Cat
Chipper.
A full set of gauges enables the operator
to monitor primary functions at all times.
Both models are electric start (battery
not included).
Model 74950
Model
Engine
Size
(LxWxH)
Chipper
Capacity
Feed
System
Feed
Sensor
Feed
Opening
Weight
(Lbs.)
Wheel
Base
Tires
72928
Kubota
28 hp diesel
119"x79"x89"
9"
hydraulic
standard
9"x9"
2480
68”
P215
75R15
74950
Kubota
50 hp diesel
119"x79"x89"
9"
hydraulic
standard
9"x9"
2700
68“
P215
75R15
Option:
71677 2" Ball Coupler For Pintle Hitch
“It's well-built. It's easy to
service. It's easy to make
adjustments. It does the job
it's supposed to do!.”
Rodney Palmer
Monterey, California
2
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
6" HYDRAULIC FEED CHIPPERS
One-of-a-Kind Feed System Does the Work For You!
6" chippers. The feed roller is 15" in diameter,
containing 10 knife blades for enhanced powerful
feeding. The discharge chute extends to the
end of the hitch for efficient loading and with
its chain drive quickly rotates 360 degrees with
ease. The 6" chipper is available with Honda 24
hp OHV twin-cylinder gas engine or a Kubota
28 hp, three-cylinder diesel liquid cooled engine.
Both models have a 6.5"x13.5" feed opening with
a wide open feed chute measuring 36"x 33".
The 26"x1" thick, 165 lb. dynamically-
balanced disc with cantilever design reduces
wrapping while utilizing 4-reversible chipper
blades, and adjustable 4-sided anvil. The triple
banded belt drive provides a better transfer of
power. The Bear Cat 6" Chipper also features a
telescopic tongue with 2" ball coupler, torsion
axle suspension, adjustable jack stand with
wheel and adjustable rear stabilizer. Its 60"
wide trailer is ideal for tight roads, storage and
maneuverability.
CHIPPERS
Invest in the chipper that’s loaded with new
standard features to make your job easier. Our
new breed of chipper can handle branches up
to 6" in diameter, with the ability to chip the
toughest brush with ease.
Features, include a 6.7" chain-driven square
discharge chute, a live hydraulic feed system with
a variable speed feed roller with instant reverse.
Our newly developed “try again” feed system
automatically retries feeding limbs. Feed sensor is
factory installed and standard equipment on these
Bear Cat's hand-operated manual clutch
engagement level assures ease of use.
Live hydraulics with a four-position valve.
Features such as an "instant reverse"
and "try again" make short work of piles
of brush.
“This chipper tows like a
dream, yet chips far
better than any other six-inch
chipper available today.”
Model 74628
Model
Engine
Size
(LxWxH)
Hopper
Chipper
Size/Inches Capacity
Feed
Sensor
Feed
Opening
Feed
System
Weight
(Lbs.)
Tires
74624
Honda
24 hp OHV
132"x59"x93"
33x36
6"
standard
6.5"x13.5"
hydraulic
1,850
P215
75R15
74628
Kubota
134"x59"x93"
28 hp diesel
33x36
6"
standard
6.5"x13.5"
hydraulic
2,475
P215
75R15
Jaques Berie
Pittsburgh, Pennsylvania
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
3
6" & 8" COMMERCIAL CHIPPERS
Take Your Choice From Three Job-Tested Chippers
For ease of use and rugged reliability, it’s
hard to beat these commercial grade, heavy-duty
machines. Highway towable to your work site, you
can select from a self feed model or a hydraulic
system.
The 30"x1.25" thick, 275 lbs. dynamicallybalanced disc with an adjustable 4-sided anvil with
four reversible chipper blades. The feed roller
on models 72620 and 74824 is 15" in diameter,
containing 10 knife blades for enhanced powerful
feeding.
A unique 360 0 rotating bed permits the
operator to feed the hopper from any direction;
a real advantage when the work is curb side
and road traffic is a potential problem. The 8"
discharge chute also rotates a full 360 0, so you can
direct the flow of chips into a pile or the back of
a truck.
Choose a 20 or 24 hp Honda OHV V-twin
engine.
Chipper is pre-wired for the optional
(73244) digital programmable feed
sensor and hour meter. This option is
available only on the 72620 and 74824.
With a 360 0 rotating bed, you can feed
the hopper from any direction. These
towable chippers come standard with
torsion axle suspension.
Model 74824
Model
Engine
Size
LxWxH)
Chipper
Capacity
Feed
System
Feed
Opening
Start
Weight
(Lbs.)
Tires
71620
Honda
20 hp
76"x80"x90"
6"
self feed
9"x9"
electric
1445
5.30"x12"
pneumatic
72620
Honda
20 hp
93"x80"x90"
6"
hydraulic
9"x9"
electric
1865
5.30"x12"
pneumatic
74824
Honda
24 hp
93"x80"x90"
8"
hydraulic
9"x9"
electric
1870
5.30"x12"
pneumatic
Option:
73244 Digital Programmable Feed Sensor and Hour Meter for Models 72620 and 74824
4
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
“We’ve always been very
satisfied with Bear Cat
equipment.
It is very durable and
we would recommend
it to anyone.”
Ron Williams
Orangeville, Ontario
8" PTO CHIPPERS
Getting The Most From Your Tractor Just Got Easier
produced. The 30"x1" thick, 275 lbs. dynamicallybalanced disc, adjustable 4-sided anvil, four
reversible chipper blades. The feed roller on
Model 72854 is 15" in diameter, containing
10 knife blades for enhanced powerful feeding.
A hydraulic jack is mounted on the hydraulic
feed system for ease of maintenance. Plate
steel construction means solid performance for
hundreds of hours, and maintenance is enhanced
by a hinged disc cover that provides wide open
access to the chipper blades and disc.
CHIPPERS
Power take offs on utility tractors have become
a primary source for much of the work around
farms, orchards…any place where the need exists
for turning a pile of branches into a pile of chips.
You choose — self feed or hydrostatic
hydraulic feed for infinite feed settings – these
chippers mount on your three point hitch and
hook directly to the PTO for quick setup and
power on demand.
Rotating 360 0, the 8" round discharge chute
gives you accurate control over the flow of chips
Model 72854 has the capacity you need
with a powerful hydraulic feeding system.
The hydraulic feed system makes chipping
much easier by crushing in the side
branches.
Four reversible chipper blades mounted
on a dynamically balanced disc weigh in
at 275 lbs. Maintenance and service is
quick and easy with a hinged disc cover.
“My Bear Cat has
never faltered or even
breathed hard when
I feed it up to 9" slash!
A fabulous
machine!”
Model 71854
Model
Engine*
Size
(LxWxH)
Chipper Feed
Capacity System
Feed
Opening
Weight
(Lbs.)
3 Point
Hitch
PTO
71854
PTO
52"x47"x93"
8"
self feed
9"x9"
885
Cat. 1
540 rpm
72854
PTO
69"x50"x93"
8"
hydraulic
9"x9"
1300
Cat. 1
540 rpm
*For Use On Tractors With Engine Horsepower Ratings From 25 to 60 hp
Ron Wyatt
Colbert, Washington
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
5
4" TOWABLE CHIPPERS
The Perfect Size For So Many Applications
Here’s the machine the entire industry has been
demanding – a 13 or 20 hp chipper. Both are
capable of devouring branches up to 4" in diameter
through a wide hopper and chipper opening.
We didn’t stop there.
Bear Cat’s 4" chippers come with a standard
6" round discharge chute and adjustable deflector,
rotating a full 360° for exceptional accuracy when
directing chips into a truck, trailer or wagon.
Highway towable—with a 2" ball coupler,
44" wheel base and Torflex suspension axle—the
Bear Cat chippers are also simple to operate, with
a big 27"x28" feed hopper and 5.5"x7" chipper
opening that defies small side limbs.
An adjustable 4-sided anvil maintains efficient
chipping action for many hours of use.
Hinged disc cover provides easy access
to a 140 lb. dynamically balanced disc
that’s 20" in diameter and 1.25" thick for
the mass and momentum that devours
branches and small trees.
Model 73413
Model Engine
Size
(LxWxH)
Hopper
Size
Chipper
Capacity
Feed
Opening
Start
Weight
(Lbs.)
Tires
73413 Honda
13 hp
73"x52"x87"
27"x28"
4"
5.5"x7"
recoil
780
5.30"x12"
pneumatic
73420 Honda
20 hp
73"x52"x87"
27"x28"
4"
5.5"x7"
electric
820
5.30"x12"
pneumatic
“After receiving numerous
chippers on the market,
I found the Bear Cat 73413
to be more durable
and reliable and more
suited for my landscaping
company's needs.”
Tim Stefanco
Ramsey, New Jersey
6
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
4" & 5" PTO CHIPPERS
Reliable Power You Can Take With You
Model 73454 or hydraulic feed Model 74554
both come equipped with a 20"x1.25",
140 bs. dynamically balanced steel disc with four
reversible chipper blades, easy feeding with a
big 27"x28" feed hopper and 5.5"x7" chipper
opening that defies small side limbs, 360˚
rotating 6" discharge chute. The 74554 has a 15"
diameter feed roller with 10 knives.
CHIPPERS
If a 4" or 5" PTO chipper will handle your
debris, the Model 73454 or the Model 74554 is
just the ticket. You choose the model based on
your power requirements. If you have a utility
tractor with a 540 rpm PTO, one of these is your
pick.
Built Bear Cat tough, yet compact in design,
the 4" and 5" chippers will handle your debris
recycling problems.
Model 73454 PTO Chipper brings new
meaning to power in a 4" chipping unit. A
mean machine in a compact design with a
large, easy to use 27" x 28" feed hopper.
Hinged disc cover provides easy access
to the dynamically balanced 20" x 1.25"
thick solid steel disc with 4 reversible
chipper blades.
Model 74554
“ There's no need to change
anything —it is head
and shoulders above
the competition!”
Richard Raynes
Cutts Island, Kittery Point, Maine
Model
Size
(LxWxH)
Chipper
Capacity
Feed
System
Feed
Opening
Weight
(Lbs.)
3 Point
Hitch
PTO
73454*
48"x45"x87"
4"
self feed
5.5"x7"
600
Cat. 1
540 rpm
74554*
94"x40"x93"
5"
hydraulic
5.5"x7"
980
Cat. 1
540 rpm
Option:
73071 Digital Programmable Electronic Feed Sensor and Hour Meter (Model 74554 only)
*Models 73454 and 74554 - Tractors With 540 rpm PTO Drive, Engine HP Ratings From 13 hp diesel and 15 hp gas to 45 hp. Category 1 Three Point
Hitch
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
7
5" & 8" SKID STEER CHIPPERS
Turn Your Skid Steer Into A Mobile Workstation
Bear Cat’s line of skid steer chippers attach in
seconds and are driven solely by your skid steer’s
hydraulics. They are available in both standard/
high flow and high flow models and will make
short work of any troublesome debris.
An infinite number of hydraulic feed speeds
are available with a simple handle turn.
The chipper has two mounts, so it can be
set to feed in front or to the curb side.
A four-position manual valve easily
controls the hydraulic feed roller.
Model 74800
Model
Hydraulics
Feed Opening
Size
Chipper
Capacity
Feed
System
Chipper
Disc
Operating
Weight (Lbs.)
74500
Standard or
high-flow**
5.5"x7"
3"*
hydraulic
20"x1.25"
140 lbs.
1145
74800
High-flow***
9"x9"
5"*
hydraulic
30"x1.25"
275 lbs.
1525
*Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
**Standard-flow requires a minimum of 15 gallons per minute (GPM) hydraulic oil flow
***High-flow requires a minimum of 25 GPM hydraulic oil flow
8
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
Built-in hydraulic jack makes feed roller
maintenance quick and easy.
4.5" TOWABLE CHIPPER
Designed And Engineered For Homeowners
Model 77454 PTO Chipper is designed for
mini compact tractors up to 22 hp.
with cantilever design reduces wrapping while
utilizing two reversible chipper blades. Quick
change hitch and axle can be changed to front
or back of chipper allowing the chipper to be
towed from either end on both models. A hitch
can be added to the rear of the chipper trailer
for pulling an additional trailer. A 4.5" square
optional discharge chute with cap directs the
chips and raises the discharge of chips into the
trailer or back of a pickup.
2" ball coupler, safety chains, brake lights,
fenders and directional signals are standard on
Model 77413 which is road towable.
Both models have a four-sided adjustable steel
anvil.
CHIPPERS
The Bear Cat 77413 road towable chipper has
a 13 hp Honda OHV engine. Its heavy-duty axle
with 4-bolt hub and 480/400 by 8" wheels and
tires make this unit road towable up to 45 mph.
The Bear Cat 77412 Yard-Towable Chipper
has a 12 hp Briggs and Stratton Electric Start
OHV InTec Engine. This chipper features
independent and adjustable axles that can be
adjusted for confined spaces or extended for
increased stability.
Both models are built with heavy-duty,
7-gauge chipper housing and trailer construction.
Each contains a double-banded belt drive and
features a feed chute opening of 13"x14.5". The
14"x1" thick, 49 lb. dynamically- balanced disc
Compact design and an adjustable axle
(77412) makes this an extremely versatile
yard machine.
Cantilever rotor/bearing and reversible
chipper blades make maintenance a
simple process.
Model 77413
When equipped with the optional
discharge chute, chips can be directed
into a cart, barrel or truck bed for easy
clean up.
Model
Engine
Size
(LxWxH)
69”x34”x43”
Chipper Feed Opening Start
Capacity Size
4.5”
13"x14.5"
electric
Weight
(Lbs.)
380
77412
12 hp Briggs &
Stratton OHV
77413
13 hp
Honda OHV
69”x34”x43”
4.5”
13"x14.5"
456
77454
PTO
40"x37"x43"
4.5”
13"x14.5"
recoil
361
3 Point
Hitch
PTO
Tires/Wheels
480/400x8”
pneumatic
480x400x8”
pneumatic
Cat. 1
540 rpm
Option:
74634-00
4.5" Square Discharge Chute
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
9
5" CHIPPER/SHREDDER/BLOWER
Perfect For So Many Tough Jobs and Applications
Get the job done and into the truck
quickly and easily with the 73554! Heavy duty
construction, the 73554 PTO 3 point hitch
mount weighs 720 lbs, means years of dependable
service. The double banded belt drive gives a more
positive transfer of power.
A Great machine to Move from Job to Job.
The 75524 is the machine landscapers and golf
courses need to clean up, move debris and make
mulch. A self-feed chipper/shredder without a
screen reduces plugging, especially with damp
material. The 18"x.75" thick, 146 lbs. dynamicallybalanced rotor is equipped with 4 reversible
chipper blades, 36 shredder knives and 4 thrower
blades.
5" PTO Chipper/Shredder/Blower
Model 73554
Reversible chipping blades (circled)
mounted at 90° to each other for more
efficient chipping.
Model 75524
Model
Engine*
Size
(LxWxH)
Chipper
Capacity
Feed
System
Chipper
Shredders
Weight
(Lbs.)
75524
Honda
24 hp
87"x52"x92"
5"
self feed
4 chipper blades
1130
36 shredder knives
73554
PTO
54"x33"x92"
5"
self feed
4 chipper blades
720
36 shredder knives
3 Point
Hitch
PTO
Tires
Both the 73554 and the 75524 have five
shredder settings (circled inset photo)
which allows the operator to select
consistency of mulch. An adjustable
gate (back photo) regulates the shredder
output.
5.30x12
pneumatic
Cat. 1
540 rpm
* For Use On Tractors With Engine Horsepower Ratings From 13 hp diesel and 15 hp gas to 45 hp. Both Model 75524 and PTO Model 73554 have 36 free
swinging shredder knives for more efficient shredding. Each model also has a large 18”x13” shredder feed hopper opening with fold down tray.
10
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
Easy access to rotor, blades and knives is
provided by the large hinged cover with
safety interlock.
5" PTO & TOWABLE CHIPPER/SHREDDER
Unleash The Performance And Power
trees into the chipper chute, the 70554 and 71020
chipper/shredder models with an optional 1-speed
blower attachment will pile the material where you
want it.
Because the optional blower discharge chute
rotates a full 360 0 and is equipped with an
adjustable deflector cap, precision placement of
wood chips can mean filling up a pickup box,
trailer or wagon for easy clean up and less labor.
CHIPPER/SHREDDERS
If you have more acreage, you need more
power to keep up with tree clearing, trimming
and debris handling. Which makes the 70554 and
71020 the perfect machine for the job.
Bear Cat’s 125-pound balanced rotor and 4
reversible chipper blades have a well-deserved
reputation for converting mounds of tree branches
into mounds of mulch and compost material.
Whether you’re loading leaves and debris down
the 20"x30" hopper or feeding 5” branches and
5" CHIPPER/SHREDDER
Model 71020, road towable
The Model 70487 one-speed blower
attachment makes chip placement easy.
Model 70554
*Model 71020 with optional 71125
vacuum hose and 71110 2-speed blower.
The optional vacuum hose and two-speed
blower will significantly reduce your time
on the job.
Model
Engine
Size
(LxWxH)
Chipper
Capacity
Chipper
Shredders
70554
PTO**
42"x42"x48"
5"
4 chipper blades
36 shredding knives
71020
Honda
20 hp
80"x46"x50"
5"
4 chipper blades
36 shredding knives
Start
electric
Weight
(Lbs.)
3 Point
Hitch
PTO
450
Cat. 1
540 rpm
715
Tires
480/400-8
pneumatic
Options:
70487 One Speed Blower With 4-Blade Radial Fan; 3600 Rotation of 4” Discharge Tube; Adjustable Cap
70649 Leaf Tamper
71110 Two Speed Blower With 8-Blade Radial Fan; 3600 Rotation of 6” Discharge Tube; Adjustable Cap
71125 Vacuum Hose Attachment; 8” Diameter; 20’ Long, With Aluminum Handle
* 71125 Vacuum Hose Attachment Works Exclusively With 71110 2-Speed Blower. **Model 70554—Tractor with 540 rpm PTO drive hp rating from
13 hp diesel and 15hp gas to 45 hp.
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
11
3" CHIPPER/SHREDDERS
Dependable, Easy To Use And Popular With Everybody
Investing in a Bear Cat commercial chipper/
shredder is like money in the bank, because you
can meet the diverse needs of many customers
with a portable or road towable model.
Super strong motor mounts and balanced
Honda 8 hp OHV engines start easy, run
quiet and are proven reliable, with minimum
maintenance and service requirements for busy
rental yards.
Even a beginner can confidently chip
branches up to 3" in diameter with the two
reversible chipper blades on a balanced rotor, and
12 serrated shredding knives provide trouble-free
shredding. The large, easy-feeding hopper helps
every user work with confidence.
Power to the rotor is enhanced by the 2-belt
drive which helps every operator turn all sorts
of yard debris into great mulch material. Either
machine is very maneuverable around a job site.
Model 70580 is road towable to 45 mph
and is equipped with a Honda 8 hp and
2" ball coupler.
Engine start aid releases the rotor for
easy engine start up. Dual belt drive
transfers more power to the cutting
system.
Accessories for
Model 70380
Model
Engine
70380
Size
(LxWxH)
Hopper
Size
Chipper
Shredder
Chipper
Capacity
Start
Clutch
Weight
(Lbs.)
Tires
Honda
38"x23"x46" 12"x22"
8 hp OHV
2 chip blades
12 shred knives
3"
recoil
manual
242
410/350-4
pneumatic
70385
Honda
38"x23"x46" 12"x22"
8 hp OHV
2 chip blades
12 shred knives
3"
electric
manual
251
410/350-4
pneumatic
70580
Honda
44"x57"x49" 12"x22"
8 hp OHV
2 chip blades
12 shred knives
3"
recoil
manual
330
480/400-8
pneumatic
Option:
70089 Leaf Tamper
12
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
71113 FOLD UP TOW HITCH Move
from job site to job site in a hurry!
17854 DEBRIS BAG Lays on the
ground below the discharge chute;
simplifies clean up.
3" CHIPPER/SHREDDERS
Portables That Work All Day Without A Coffee Break
and you’ve got a machine with the muscle to run
strong all day long, reducing debris and
3" branches to a tidy pile.
With a 12 volt electric starter (battery not
included), Model 70085 will become your most
convenient lawn and landscape maintenance
management tool ... one that you’ll trust for years.
Serrated reversible shredding knives are the
best in the industry, with a history of performance
that surpasses flat hammers in cutting stubborn
debris. Bear Cat shredders use a staggered
pattern to give better performance.
CHIPPER/SHREDDERS
Solid, welded construction, strong motor
mounts, large loading hoppers and big diamondshaped chipper chutes highlight the features you’ll
come to appreciate with our line of mid and full
sized chipper/shredders.
Two reversible chipping blades and
8 or 12 serrated shredding knives are the most
efficient method of reducing debris.
For discharge control, add an optional blower
so you can direct the flow of chips and debris right
into your pickup box or a trailer.
Take your pick from a lively 5.5 hp engine or
the beefy 8 hp model, both with single belt drive
.375"
Model 70080 shown with 70251 optional
blower attachment
.75"
1.5"
Standard
Wet
Debris
More screens: 3 additional
screens are available on all
3” to 5” chipper/shredders.
Rotor assembly is balanced with 2 chipper
blades. The 5.5 hp has 8 staggered
shredding knives and the 8 hp has 12
staggered shredding knives. Above shown
with 1.5" standard screen.
3" Chipper/Shredders
Model 70080
70098 STANDARD TOW HITCH Hook up
to your garden tractor with this simple
hitch.
70093 ALL WEATHER COVER Protect
your Bear Cat with this vinyl cover for all
5 and 8 hp models.
Model
Engine
Size
(LxWxH)
Hopper
Opening
Chipper
Shredder
Chipper
Capacity
Start
Weight
(Lbs.)
Tires
70050
Briggs Intek
OHV 5.5 hp
40"x22"x46"
12"x22"
2 chip blades
8 shred knives
3"
recoil
182
410/350-4
pneumatic
70080
Briggs Intek
OHV 8 hp
40"x22"x46"
12"x22"
2 chip blades
12 shred knives
3"
recoil
217
410/350-4
pneumatic
70085
Briggs Intek
OHV 8 hp EL
40"x22"x46"
12"x22"
2 chip blades
12 shred knives
3"
electric
232
410/350-4
pneumatic
70180
Briggs Intek
OHV 8 hp IC
40"x22"x46"
12"x22"
2 chip blades
12 shred knives
3"
recoil
222
410/350-4
pneumatic
Option:
70089 Leaf Tamper
70251 Blower With 2-Blade Radial Fan; 360o Rotation of 4” Discharge Tube; Adjustable Cap (8hp only)
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
13
1.5" COMPACT CHIPPER SHREDDERS
Lightweight, Strong And Easy To Use Around The Yard
Here’s the simple machine for elevating your
yard maintenance to the next step. With the Bear
Cat compact chipper/shredder, you’ll make short
work of small branches, leaves and yard debris.
Light weight and easy to maneuver. It's
compact design allows storage in tight spaces.
The Briggs and Stratton 3.5 hp engine provides
plenty of horsepower for the 1.5" chipper.
A compact chipper/shredder that really works
great! The direct drive rotor features 2 reversible
chipper blades and 8 shredder knives to clean up
small garden and yard waste.
.75"
1.5"
Standard
Screens: an additional screen
is available on the Model 70530
chipper/shredder.
Check out the full
line of Bear Cat
products online!
bearcatproducts.com
• Chippers
• Chipper/Shredders
• Vacuums
• Stump Grinder
• Wheeled Trimmer
Mowers
Model 70530
Model
Engine
70530
Briggs &
Stratton 3.5 hp
Size
Hopper
(LxWxH)
Size
27"x17"x38" 17"x12.5"
Chipper
Shredder
2 chip blades
8 shred knives
Chipper
Capacity
1.5"
Weight Wheel Tires
(Lbs.)
Base
87
15.75” 8”x2.25”
semi pneumatic
Option:
70089 Leaf Tamper
Also on our website:
 Owner's Manuals
 Parts Manuals
 Troubleshooting
 Dealer Locator
 Warranty Registration
 Product Specs
“This unit replaced a 25-year
old competitor's model
and I wish I had purchased a
Bear Cat back then!”
Bob McCochron
Albuquerque, New Mexico
14
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
COMMERCIAL STUMP GRINDER
Unique Design Lets You Get Close To Obstacles
An 11 hp Honda OHV engine will let you
grind down stubborn tree stumps in mere minutes
when you fire up a stump grinder from Bear Cat.
Because the design is so compact, you can
get the 4 hardened carbide cutting teeth next to
building foundations, sidewalks and other fixed
objects. Only 23" wide, it will fit into any yard.
The single wheel brake allows the operator
to pivot the cutting head across the surface of the
stump as it holds a fixed position, while a screencovered opening provides a clear view of the
cutting action. Power transfer from the engine is
through a field-proven, double banded belt drive.
Large pneumatic tires take much of the effort
out of changing locations and heavy duty sealed
bearings keep these machines working for years.
A screen covered opening enables the
operator to watch the cutting head do its
job.
STUMP GRINDER
Four, durable carbide tipped cutting
teeth are highly effective at grinding even
the hardest woods below ground level.
Model 73711
Model
Engine
Size
(LxWxH)
Grinder
Start
Weight
(Lbs.)
Wheel
Base
Tires
73711
Honda
11 hp OHV
52"x23"x44"
4 carbide
teeth
recoil
195
22“
480/400-8
pneumatic
“The Bear Cat products are
the best in the industry!”
Dan Coleman
Port Aurthur, Texas
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
15
EZ TRIMMOWERS
Clean Up Has Never Been Easier, Or Faster.
Bear Cat produces a complete line of heavy
duty EZ TrimMowers that can churn their way
through the heaviest weeds or lightly trim around
the most intricate landscaping with ease —
the EZ TrimMower.
Bear Cat has the broadest model selection in
the industry. Fully warranted and based on a solid
steel frame, the EZ TrimMower is tough…yet
light enough for one person to load and unload.
Choose from two different weights of nylon
cutting string for keeping your cuts smooth, clean
and precise.
The wear-resistant steel mow ball follows the
terrain to prevent scalping. Put the Bear Cat
EZ TrimMower to work wherever your need for
rugged reliability is essential for getting the job
done right the first time!
The optional Pro Line holder is designed
to handle all shapes and sizes of line.
This is a must for commercial users.
(74891-00)
By replacing the string trimmer head with
this rugged Sabre Tooth Blade, you can
cut saplings up to four inches in diameter
with balance and leverage that easily
outperforms hand held trimmers with
similar attachments. (74548-00)
Model 73265
When rough clearing brush, the Sabre
Tooth Blade can cut down saplings up to
4" in diameter. (74548-00)
The Nylon Blade Kit includes 4 blades
(plus 4 extras) and the necessary
hardware to attach them to your mower
plate. Now you can really get after those
thick, tough weeds with ease. (73060)
16
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
The self propelled EZ
TrimMower uses two wheel
drive sprockets and chain
drive for much more positive
traction than single wheel
drive models. The geared
transmission provides
maximum drive for ditches,
hills, dikes and irrigation
canals and 3 speeds to
choose from.
EZ TRIMMOWERS
Tilt and Trim Feature Provides Greater Flexibility
s
ol d
o
T de ge
No ee han g!
N C in
To Str
Select the Tilt-and-Trim angle you need
and efficiently cut that hard to reach
grass.
OCT (off center tilt) trim feature enables
the operator to select from one of four
positions that permit tight trimming
around and under some obstructions, so
the operator can continue on a straight
path while trimming.
Model 74455
Engine
Horsepower
Drive
Cutting Width
Wheel Support
Cutting Height
Nylon Cutting String
Parallel Trimming
Tilt Head
Weight
Overall Length
Overall Height
Overall Width
Frame Material
Start
Fuel Capacity
Briggs & Stratton
Quantum
6.5 hp
Push
24”
Bushings
1.875" & 2.75"
Heavy duty .155 mil
Manual
No
77 lbs.
50"
38"
21"
Solid Steel
Recoil
1.5 qt.
Options:
74548-00 Sabre Blade
74891-00 Pro Head
74891-00 Nylon Cutting String Kit 1.30 mil.
Honda OHC
5.5 hp
3-Spd. Self-Prop
24”
Ball Bearings
1.875" & 2.75"
Heavy duty .155 mil
Manual
No
86 lbs.
50"
38"
21"
Solid Steel
Recoil
1.2 qt.
SELF-PROPELLED
73265
75365
Briggs & Stratton
Quantum Elec. Start
6.5 hp
3-Spd. Self-Prop
24”
Ball Bearings
1.875" & 2.75"
Heavy duty .155 mil
Manual
No
77 lbs.
50”
38”
21”
Solid Steel
Electric Start
1.5 qt.
Briggs & Stratton
Quantum
6.5 hp
3-Spd. Self-Prop
24”
Ball Bearings
1.875" & 2.75"
Heavy duty .155 mil
Manual
No
77 lbs.
50”
38”
21”
Solid Steel
Recoil
1.5 qt.
TILT AND TRIM
76065
74455
Briggs & Stratton
Quantum
6.5 hp
Push
24”
Ball Bearings
1.875" & 2.75"
Heavy duty .155 mi
Standard
Yes
77 lbs.
50"
38"
21"
Solid Steel
Recoil
1.5 qt.
Honda OHC
5.5 hp
Push
24”
Ball Bearings
1.875" & 2.75"
Heavy duty .155 mil
Standard
Yes
82 lbs.
50"
38"
21"
Solid Steel
Recoil
1.2 qt
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
TRIM MOWERS
Model
ECONOMY
75065
73455
17
BEAR VACS
Fall Clean-Up Doesn’t Get Much Easier
Five different height settings make leaves, yard
debris and small branches disappear in short order.
A full 6-bushel capacity quick-dump bag, adjustable
handlebars with cushion grip and ball bearing
wheels for a smooth, easy glide over the ground will
have you looking forward to fall clean-up whether
you’re a homeowner or professional user!
The 6-blade radial fan, coupled with the wide
fan housing, creates more CFM than any
competitor in its class.
All models feature seamless housing and ball
bearing wheels for smoother, easier rolling over the
ground. An adjustable-height handle bar fits the
machine to the operator for even more comfort.
HOSE KIT gets you into those hard-toreach areas (73606-00).
PIVOTING CASTER WHEELS up front
makes using on hard surfaces even
easier. (73607-00).
DURABLE NOZZLE WEAR PLATE resists
nozzle wear when using on hard surfaces
(73640-00).
Model
Engine
Intake
Width
Drive
Weight
(Lbs.)
Tires
75050
Honda 5 hp OHV
27”
push
108
12"x2.5”
75060
Briggs & Stratton
6 hp InTec OHV
27”
push
113
12"x2.5”
75350
Honda 5 hp OHV
27”
3-spd. self-prop
121
12"x2.5”
75360
Briggs & Stratton
6 hp InTec OHV
27”
3-spd. self-prop
126
12"x2.5”
Options:
13873-00 Extra Bags
73606-00 Hose Kit
73607-00 Pivoting Caster Wheels
73640-00 Durable Nozzle Wear Plate
18
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
Bear Cat offers two models that are
self-propelled 3-speed drive. The addition
of a self-propelled model is well worth it,
especially on turf!
BEAR VAC PRO
Performance You Can Count On For Years To Come
The Bear Vac Pro features an exclusive agitator
bar with 28 mounted beater blades that will let
you pick up everyone’s leaves, matted leaves and
small branches. An electric start model makes it
even easier to get into action, clearing a 29" wide
swath… including dethatching grass.
When the branches get bigger, up to 3" in
diameter, simply chip them up with the Bear Vac
Pro’s built-in chipper.
Self-propelled with large knobby drive tires,
the Bear Vac Pro has five forward speeds and one
in reverse. A differential transaxle, coupled with a
single pivoting front tire, delivers maneuverability
for tight spaces.
With a single handle adjustable height control,
and a vacuum opening that adjusts for maximum
performance, you’ll reduce the volume of leaves
by up to 12-to-1. And the standard EZ Dump
system, with air cutoff, makes for fast unloading.
Bear Cat’s exclusive agitator bar with
28 fixed blades lifts the most stubborn
leaves and shreds them up to 12:1
reduction.
STANDARD EZ DUMP SYSTEM keeps
you rolling. Extra tubs available (12040).
Convenient air shut off allows you to
change tubs on the go. No need to shut
off engine.
Model 75011
Kim Ness
North Platte, Nebraska
Model
Engine
Size
(LxWxH)
Chipper
Capacity
Chipper
Start
Weight
(Lbs.)
Tires
75011
Honda
11 hp
65"x32"x40"
3"
2 chipper
blades
recoil
302
4.80/4.00-8
pneumatic knobby
75111
Honda
11 hp
65"x32"x40"
3"
2 chipper
blades
electric*
304
4.80/4.00-8
pneumatic knobby
Option:
12040 Extra 28 gallon tub
VACUUMS
I can do more work in a
couple of hours than
I used to be able to do all
day when I was using
another brand without
the Bear Cat features.”
*Battery not included
For a dealer near you call us at 800.247.7335 or log onto our website www.BearCatProducts.com
19
TRUCK LOADER
Commercial Performance You Can Count On
This is the machine cities, commercial firms,
rental centers and golf courses need to quickly get
debris off the ground and into the truck!
Features:
• Double banded belt drive with manual clutch
engagement
• 2" ball coupler, Safety Chains and
Trailer Lights Standard
• 6-gallon fuel tank
• 8" Diameter Discharge Chute
• 24 hp EL Honda Twin OHV Engine
• Electric Start
• .375" thick steel fan blades
• Large 15" Tires for Easy Towing
• Torsion Axle Suspension
• 12" Diameter, 12' Flexible Pick Up Hose
• Hose quickly and easily folds up for storage
• 360o Rotating Discharge Chute
• Light-Weight Aluminum Handle
• Scrolled housing for more efficient
transfer of air
Easy access to the fan housing is gained
by removing a single bolt. Scrolled
housing for more efficient air flow.
Model 75124
Model
Engine
Start
Fan
Max CFM
Weight (Lbs.)
Tires
75124
Honda OHV
24 hp gas
electric
4 blade
radial
3275
1022
15"
Exclusive Double Banded Belt Drive
is shown above. Manual clutch
engagement assist in cold weather
starts, plus helps avoid damage during
a lockup.
Options:
74731-12 16" Vertical Chute Extension
74737-00 4' Flexible Horizontal Chute Extension
74773-00 Abrasion Resistant Steel Weld-In Rotor Wear Plate
Vacuum hose is designed to quickly fold
up for storage and transportation.
YOUR AUTHORIZED
BEAR CAT DEALER IS:
®
Bear Cat
P.O. Box 849 • West Fargo, ND 58078-0849
Phone: 701.282.5520 Fax: 701.282.9522
USA & Canadian Toll Free : 800.247.7335
E-mail: [email protected]
www.BearCatProducts.com
75M092104
Bear Cat Truck Loader, Chippers, Chipper/Shredders, Vacuums, Wheeled String Trimmers and Stump Grinder meet or exceed all applicable ANSI safety
standards. Bear Cat Company reserves the right to change features and specifications due to research and development being applied at the time of this printing.
MADE IN USA