Agricultural Equipment
Transcription
Agricultural Equipment
Agricultural Equipment A Carraro Group Company 2 3 Introduction Carraro Group Carraro is a multinational Group and world leader in power transmission systems. Its core business consists in conceiving, designing, validating, manufacturing and marketing drive systems for construction equipment, agricultural tractors, material handling, light commercial vehicles, automobiles, renewable energies and stationary applications. The Group, whose holding company Carraro Spa has been listed on the Italian Stock Exchange since 1995, is based in Campodarsego (Padua) and has manufacturing facilities in Italy, Germany, Argentina, India and China. The Group Areas Global footprint Where we are Integrated solutions (axles, transmissions, final & swing drives) for a wide range of applications: mining, construction equipment, agricultural tractors, light commercial vehicles, material handling and stationary applications; cut steel gears for the automobile sector, agricultural applications and construction equipment, railway, industrial sector and wind power generators; sintered gears and components for cars, light commercial vehicles, two-wheel vehicles, power tools, garden equipment, material handling, industrial applications and wind energy. Design and manufacturing of light utility, vineyard & orchard tractors, from 60 to 100 HP; offering a wide range of engineering services, from simple consultancy to “turnkey” projects. Inverters and power control systems for renewable energies production (solar & wind energy). Variable speed drives and soft starters for electric motors in industrial automation, water management, HVAC and refrigeration, cement, oil&gas plants. Hybrid and electric vehicle powertrains. Manufacturing sites Italy (8 plants), Argentina (Haedo), Germany (Hattingen), India (2 plants - Pune), China (Qingdao, Suzhou) Dealers Iran, Turkey, China, South Korea, Australia, Japan, Poland, Ukraina, USA, South Africa Branches USA (Virginia Beach, San Francisco), Brasil (San Paolo), Italy (Milan), Germany (Munchen), Russia (Moscow), Spain (Castellon de la Plana), Canada (Toronto), China (Shanghai), India (Pune) Dedicated spare parts plants Italy (Monselice), USA (Rockford) Engineering Centers Italy (Padova, Bologna), Germany (Hattingen), India (Pune), Argentina (Haedo) Service providers Italy, Germany, France, Portugal, Czech Republic, Albania, Chile, Perù, Brasil, Turkey, Denmark, Paraguay, Poland, Hungary, USA, China Carraro Drive Tech Carraro Drive Tech is the Carraro Group’s core business: designing, manufacturing and marketing axles and transmissions, hydraulic drives and heavy duty gears. The company operates in various markets with three different brands Wherever there is a need for integrated transmission systems for off- and onroad vehicles, Carraro Drive Tech has the solution, with a complete, diversified product range for agriculture, construction equipment, mining, and material handling. Carraro drivelines have been optimised for the individual markets of application, to guarantee the very best efficiency and most practical vehicle layout. All this is possible thanks to the wide range of combinations of rigid and steering axles and mechanical, automatic or semi-automatic transmissions. The Carraro systems have been designed for the optimal integration of mechanics and hydraulics, under the supervision of an advanced electronic control unit. This can best manage the whole driveline while monitoring and diagnosing the vehicle functions. O&K Antriebtechnik is one of the world´s leading producers of planetary drives. As a competence centre within the Carraro Group, the company develops, manufactures & offers a full-range of final drives, slew drives and cutter drives for mobile applications as well as drives for winches, walkways and escalators. Ever-shrinking dimensions enable the units to be installed wherever space is of the essence, but O&KA is also capable of supplying the biggest drives ever made anywhere in the world, adapted for the largest mining shovels and tracked cranes. SIAP is the centre of excellence of the Carraro Group for heavy-duty steel gears. In its plants the company is able to manufacture state-of-the-art products, thanks to leading-edge technologies covering a huge range of machining operations, with Gleason and Oerlikon cutting systems and lapped or ground surface finishings. The high quality of SIAP gears is assured by advanced processes for control – on Zeiss and Klingelnberg systems – and verification of meshing noise on testers. Optimisation of geometry and drive is ensured through the use of dedicated software programs. Carraro Drive Tech Drivelines for agricultural applications The Carraro Drive Tech Range for agricultural Tractors includes steering drive Axles or front Suspension Modules for a power range engines between 35 and 370 hp, coupled with a range of Transmissions up to 180 HP. Carraro Drive Tech also proposes several configurations of rear steering drive Axles for Harvesting Machines. The “Local for Local” Philosophy has not been adopted by Carraro just to realize its Global Manufacturing Footprint, but also in the Product Development approach. Thanks to the Local Enginnering Presence, Carraro has achieved a deep knowdlege of Customer Needs not only in the traditionally Markets, but also of the Emerging ones. Leveraging such know-how Carraro has conceived its Product Range offering solutions suitable for both Basic and Premium Applications. Designed to meet different needs (crop types, land dynamics, maneuvering Space, etc.) and to work in all enviroment conditions, the Carraro transmission Systems deliver vehicle performance that will maximize the productivity, at the same time enhancing the fuel efficiency. The most advanced System includes the proprietary Electronic Control Unit, which enables the management of the whole powertrain optimizing its performances, in terms of easy driveability, productivity and fuel efficiency. 10 11 Trans mis sions 12 AGRICULTURAL EQUIPMENT TRANSMISSIONS 13 T 3.0 T 3.0 Agricultural transaxle Input data Gross Engine Power (ECE R24) kW 28 HP 38 Max engine speed at rated power rpm 2000 Maximum input torque Nm 149 Configuration › Designed for tractors bound for the emerging markets for a power range up to 38 hp with a drop final reduction providing off-set wheel center axis › The two-axis design reduces dimensions, leaving ample room for the driver area › The basic version, with 8 forward plus 2 reverse speeds and constant mesh “collar shift” gears, allows massive cost savings, Premium option with synchro reverser provide the 8+8 transaxle version › The hydraulic lift draft, position and mixed control type, lift capacity 11,000 N, is designed for large attachments, thereby reducing job performance times › The mechanically operated “Ball & Ramp” wet brakes positioned close to the differential act before the reduction unit and are virtually maintenance free › The mechanical pedal-controlled differential locking ensures optimal grip even on difficult terrain › The optimal speed distribution between 2.6-32 Km/h allows smooth operation with the different attachments carried on the 3point hitch or towed › 540 and 540/540E PTO speed controlled by a Single main clutch or with a double main clutch provide possibility to indipendently control the PTO versus the transmission › The SAE3 standard clutch housing interfaces with different engine makes and satisfies the need for flexibility and image demanded by the various manufacturers Total gear [fwd x rev] 8 x 2 8 x 8 Advantages Gear box forward split [gears x ranges] 4 x 2 4 x 2 › Progressive gear change with the tractor on the go Gear box shifting Collar shift Collar shift Gear box reverse split [gears x ranges] 1 x 2 4 x 2 Reverse shifting Constant mesh Collar shift / Synchro shift › The indipendent PTO at 540 rpm or 540/540E allows for tractor to stop during implement use and is ideal for jobs with balers, rotary cultivators, etc. › Hydraulic lift with draft position and mixed control available as option Options Main data Flange to flange distance mm 1368 Reference torque at rear axle Nm 7800 Total tractor nallasted weight Kg 1900 Maximum rear tire size Rear tire index radius mm 625 Rear lift capacity at lower link kN 11 Total transaxle weight (without lub oil) Kg 470 Options › Water proof sealing allows to work in difficult environment like “rice puddling” › 8F+2R speeds / 8F+8R speeds available › Central position 4WD output › Clutch housing with SAE5 / SAE4 interface available 13.6 R 28 1 or 2 Pto Speed, Gear synchro, Reverse sliding gear, 4WD All specifications can be subject to changes without prior advice by Carraro Drive Tech 14 AGRICULTURAL EQUIPMENT TRANSMISSIONS 15 T 4.0 T 4.0 Agricultural transaxle Input data Gross Engine Power (ECE R24) kW 33 HP 45 Max engine speed at rated power rpm 2000 / 2200 Maximum input torque Nm 184 Configuration › Designed for tractors bound for the emerging markets for a power range up to 45 hp with a epiciclic final reduction providing in line wheel center axis › The basic version has 8 forward plus 2 reverse speeds and constant mesh “collar shift” gears, Premium option with synchro reverser provide the 8+8 transaxle version › The hydraulic lift draft, position and mixed control type, lift capacity 10,000 N, is designed for heavy attachments › The wet oil brakes are ball and ramp type mechanically operated, located aside of differential unit and maintenance free › The transmission is equipped with 100% differential lock controlled by a pedal › The optimal speed distribution between 2.6-30 Km/h allows smooth operation with the different attachments carried on the 3-point hitch or towed › 540 and 540/540E PTO speed controlled by a Single main clutch or with a double main clutch provide possibility to indipendently control the PTO versus the transmission › The SAE 4 clutch housing enables to interface a large options of different engines Total gear [fwd x rev] 8 x 2 8 x 8 Advantages Gear box forward split [gears x ranges] 4 x 2 4 x 2 › Progressive gear change with the tractor on the go Gear box shifting Collar shift Collar shift Gear box reverse split [gears x ranges] 1 x 2 4 x 2 Reverse shifting Constant mesh Collar shift / Synchro shift › The indipendent PTO at 540 rpm or 540/540E allows for tractor to stop during implement use and is ideal for jobs with balers, rotary cultivators, etc. › Hydraulic lift with draft position and mixed control available as option Options › Water proof sealing allows to work in difficult environment like “rice puddling” › The facility for mechanical-control 4WD take-off will add further versatility to the transaxle › Optional configuration for 2800 rpm engine use Main data Flange to flange distance mm 1368 / 1250 Reference torque at rear axle Nm 8584 Total tractor nallasted weight Kg 2100 Maximum rear tire size 13.6 R 28 Rear tire index radius mm 625 Rear lift capacity at lower link kN 11 Total transaxle weight (without lub oil) Kg 495 (standard 8F+2R, 2WD) / 540 (8F+8R, 4WD) Options 1 or 2 Pto Speed, Gear synchro, Reverse sliding gear, 4WD All specifications can be subject to changes without prior advice by Carraro Drive Tech 16 AGRICULTURAL EQUIPMENT TRANSMISSIONS 17 T 5.0 Agricultural transaxle T 5.0 T 5.5 Input data Gross Engine Power (ECE R24) kW 54 63 HP 73 86 Max engine speed at rated power rpm 2300 2300 Maximum input torque Nm 272 324 Configuration › The 2-shaft design reduces gearbox size and provides ample room in the driver area, significantly enhancing ergonomics and comfort › The basic configuration offers synchronized reverser › The basic version complete with synchronized constant mesh gears 8 forward / 8 reverse gears ensures driving comfort and reliability › The wet service brakes are designed to be virtually maintenance free and to last as long as the tractor › The basic version control is manual/ mechanical › The ground drive rear power take-off (GDPTO), allows the attachment of a motor trailer, improving versatility and traction on slopes or muddy terrain › The independent rear PTO ideal for Vineyard/Orchard tractors and light duty STD’s which are mainly used with attachments › The SAE 3 clutch housing ensures connection to different makes of diesel engine and satisfies the flexibility and brand image requirements of the various manufacturers Total gear [fwd x rev] 8 x 8 12 x 12 24 x 24 8 x 8 12 x 12 24 x 24 24 x 12 Gear box configuration [gears x ranges] 4 x 2 4 x 3 2 x 4 x 3 4 x 2 4 x 3 2 x 4 x 3 2 x 4 x 3 Gear box shifting Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range › 12 forward / 12 reverse or 24 forward / 24 reverse gears, 30 km/h or 40 km/h Gear box [hi-lo] – – Synchro gear or Power shift – – Synchro gear or Power shift Power shift › The central position 4WD box option incorporates the patented Easy-shift system and is available for the 40 km/h version Gear box reverse shifting Synchro gear Synchro gear or Power shift Synchro gear or Power shift Synchro gear Synchro gear or Power shift Synchro gear or Power shift Power shift Options › Hydraulic brake control is available on the version with suspended pedals for tractors with cabs, etc › The rear dry PTO clutch disk can be supplied either in the “normally closed” or “normally open” version › The 540 rpm one-speed rear PTO is offered in the basic version, while the two speed 540/540E or 540/1000, available as an optional › The draft, position and mixed control hydraulic lift, together with descent speed and sensitivity control, is available as an optional › Clutch housing with special length and interface › 4WD multidisc wet clutch is available Main data Flange to flange distance mm 1540 1540 Reference torque at rear axle Nm 14900 17600 Total tractor ballasted weight kg 3240 3820 16.9R30 16.9R30 Rear tire index radius mm 700 700 Rear lift capacity at lower link kN 26 26 30 aux. cyl. Total transaxle weight kg 725 725 Maximum rear tire size Options 1 or 2 Pto speed, Ground drive Pto / Mechanical or hydraulic: brakes actuation, rear diff lock actuation / Wet clutch Pto / 30 kN rear lift capacity with aux. cylinder All specifications can be subject to changes without prior advice by Carraro Drive Tech 18 AGRICULTURAL EQUIPMENT T 5.0 F T 5.5 F TRANSMISSIONS 19 T 5.0 V Input data Input data Gross Engine Power (ECE R24) kW 55 67 HP 74,8 Max engine speed at rated power rpm 2300 Maximum input torque Nm 297 kW 67 91,2 Gross Engine Power (ECE R24) HP 91,2 2300 Max engine speed at rated power rpm 2300 Maximum input torque Nm 360 360 Configuration Configuration 24 x 24 24 x 12 8 x 8 12 x 12 24 x 24 8 x 8 12 x 12 24 x 24 24 x 12 Total gear [fwd x rev] 12 x 12 Total gear [fwd x rev] 2 x 4 x 3 2 x 4 x 3 4 x 2 4 x 3 2 x 4 x 3 4 x 2 4 x 3 2 x 4 x 3 2 x 4 x 3 Gear box configuration [gears x ranges] 4 x 3 Gear box configuration [gears x ranges] Gear box shifting Gear box shifting Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Gear box [hi-lo] – Synchro gear or Power shift Power shift Gear box [hi-lo] – – Synchro gear or Power shift – – Synchro gear or Power shift Power shift Gear box reverse shifting Synchro gear or Power shift Synchro gear or Power shift Power shift Gear box reverse shifting Synchro gear Synchro gear or Power shift Synchro gear or Power shift Synchro gear Synchro gear or Power shift Synchro gear or Power shift Power shift Main data Main data Flange to flange distance mm 890 or 970 Reference torque at rear axle Nm 13080 Total tractor ballasted weight kg 3200 Flange to flange distance mm 1240 1240 Maximum rear tire size Reference torque at rear axle Nm 14100 16100 Rear tire index radius mm 625 Total tractor ballasted weight kg 3200 3650 Rear lift capacity at lower link kN 26 Total transaxle weight kg 680 16.9 R28 16.9 R28 Options Rear tire index radius mm 675 675 Rear lift capacity at lower link kN 26 26 1 Or 2 pto speed, ground drive pto / Mechanical or hydraulic: brakes actuation, rear diff lock actuation / Wet clutch pto / Creeper speed from 0,5 km/h Total transaxle weight kg 700 700 Maximum rear tire size Options 1 or 2 pto Speed, Ground drive pto / Mechanical or hydraulic: brakes actuation, Rear diff lock actuation / Wet clutch pto All specifications can be subject to changes without prior advice by Carraro Drive Tech All specifications can be subject to changes without prior advice by Carraro Drive Tech 13.6 R28 20 AGRICULTURAL EQUIPMENT TRANSMISSIONS 21 T 10.0 T 10.0 Agricultural Transaxle Input data Gross Engine Power (ECE R24) kW 85 HP 115 Max engine speed at rated power rpm 2200 Maximum input torque Nm 426 Configuration › The 2-shaft design reduces gearbox size and provides ample room in the driver area, significantly enhancing ergonomics and comfort › The basic configuration offers synchronized reverser ensuring easy and rapid reversal when manoeuvring in narrow spaces typical of orchards › The basic version complete with synchronized constant mesh gears 12 forward / 12 reverse gears ensures driving comfort and reliability, as well as significant tractor cost savings › The wet service brakes, situated near the differential and before the final reduction, are designed to be virtually maintenance free and to last as long as the tractor. The basic version control is manual/mechanical, while the hydraulic control is available as an optional on the version with suspended pedals for tractors with cabs, etc › The ground drive rear power take-off (GDPTO), basic on the 12 forward / 12 reverse and 24 forward / 24 reverse gear versions, allows the attachment of a motor trailer, improving versatility and traction on slopes or muddy terrain › The independent rear PTO has been designed to transmit all the engine’s power and is therefore ideal for Orchard tractors › The SAE 3 clutch housing ensures connection to different makes of diesel engine and satisfies the flexibility and brand image requirements of the various manufacturers Total gear [fwd x rev] 12 x 12 24 x 24 24 x 12 Options Gear box configuration [gears x ranges] 4 x 3 2 x 4 x 3 2 x 4 x 3 › The wide range of optionals available, such as 12/24 gears, 40 km/h and creeper, are designed to satisfy the needs of state-ofthe-art, high productivity tractors Gear box shifting Synchro gear / Collar shift range Synchro gear / Collar shift range Synchro gear / Collar shift range Gear box [hi-lo] – Synchro gear or Power shift Power shift Gear box reverse shifting Synchro gear Synchro gear Power shift › The central position 4WD box option, designed for 4WD front axles with central differential, incorporates the SAHR wet clutch which provides shifting on-the-go and under load, so as to obtain automatic braking on the four wheels when the brake pedals are engaged. The mechanical easy shift is also available as option › The twin dry disk central clutch control completes the supply › The differential lock achieved with an hydraulically-controlled wet multidisc clutch is avaliable › The two speed 540/540E or 540/1000, available as an optional, enhances costconvenience and versatility › The clutch housing with special length and interface can be supplied on request to satisfy specific vehicle architecture requirements Main data Flange to flange distance mm 1540 Reference torque at rear axle Nm 29271 Total tractor ballasted weight kg 5775 Maximum rear tire size 18.4 R34 Rear tire index radius mm 775 Rear lift capacity at lower link kN 45 Total transaxle weight kg 1150 Options 2 pto speed, ground drive pto / Mechanical or hydraulic: brakes actuation, Rear diff lock actuation / Wet clutch: pto, mfwd, differential lock / Creeper speed from 0,5 km/h All specifications can be subject to changes without prior advice by Carraro Drive Tech 22 AGRICULTURAL EQUIPMENT TRANSMISSIONS 23 T 12.0 / T 15.0 Agricultural Transaxle T 12.0 T 15.0 Input data Gross Engine Power (ECE R24) kW 104 130 HP 140 180 Max engine speed at rated power rpm 2200 2200 Maximum input torque Nm 550 677 Configuration › Transmission with Dual Clutch architecture: the even gears are connected to one of the two clutches, and the odd gears to the other. When changing gear the electronic control pre-selects the required gear by means of the synchroniser, and therefore inverts the clutch transmitting the power › Standard speeds range from 1.6 to 40 km/h. Maximum speed can be taken to 50 or 60 km/h simply by acting on the electronic control Options › The Supercreeper option allows for tractor use at speeds starting from 0.2 km/h › 16 speeds with 8 Powershift and 2 synchro ranges Total gear [fwd x rev] 16 x 16 24 x 24 32 x 32 Gear box configuration [gears x ranges] 8PS x 2 8PS x 3 8PS x 4 Gear box shifting Power shift gear (dual clutch design) / Gear synchro ranges Power shift gear (dual clutch design) / Robotized gear synchro ranges Power shift gear (dual clutch design) / Robotized gear synchro ranges Gear box [hi-lo] – – – Gear box reverse shifting Power shift Power shift Power shift Main data › Possibility of changing 8 gears smoothly in Powershift mode with robotised ranges, thereby avoiding range changes and clutch use in almost all field work Flange to flange distance mm 1640 1890 Reference torque at rear axle Nm 37079 47211 Total tractor ballasted weight kg 6875 8250 › The Power Reverse clutch, housed in the central part of the transmission, allows for a fully-automatic change of direction, without gear changes, thereby reducing repeated actions and cycle times Maximum rear tire size 18.4 R38 20.8 R38 › Independent rear PTO, designed to transmit full engine power, resulting in speeds of 540/540E/1000 revs./min Options › The electronic control uses an electricalhydraulic clutch to manage the full transmission, guaranteeing the 4 drive wheels during braking and in any working conditions, as well as the differential locking › The hydraulic system connected to the transmission can be open centre or closed centre, with a sensitive line. In both cases, significant oil flows, pressure and lifting capacity are obtained › The rear axle contains two oil-cooled multidisc brake units and a hydraulic actuator with power brake › Electronic control lifter with dual external cylinders guaranteeing lifting capacity of 5000 kg Rear tire index radius mm 825 875 Rear lift capacity at lower link kN 50 75 Total transaxle weight kg 1450 1980 3 Pto speed / Super creeper speed from 0,2 km/h All specifications can be subject to changes without prior advice by Carraro Drive Tech AGRICULTURAL EQUIPMENT 24 Electronic Control Unit TRAX SAX TEQ2 TEQ2 RDX APPLICATION Transmission and Suspension Systems under ECU monitoring Warnings and error signals to detect failure conditions and excessive working parameters Data exchange support according to CAN protocols as SAE J1939 and KWP2000. Alternative ECU service interface through proprietary RS232 protocol. Transmission Systems under ECU monitoring Compliant with ISO13849 for a performance level PL=d (equivalent to IEC/EN61508 SIL2). Support Safety Certification of the systems where it is integrated Designed to provide calculation capacity adequate to control system & transmissions with top features Support several CAN protocols as XCP, SAE J1939 and KWP2000. 32 bit CPU 256KB ROM 16KB RAM 32 bit main CPU 1MB ROM 64KB RAM Auxiliary CPU (SafeMicro) to monitor main CPU activities Configurable according application needs. Setup parameters available for maximum operating comfort and proper vehicle responsiveness. Model based application software design structured to balance transmissions control and customer requirements. Nominal supply voltage 12 Vdc 12 Vdc 12 - 24 Vdc 12 - 24 Vdc Analog inputs Up to 5 (voltage/current/ resistance, software configurable inputs available) Up to 3 (voltage/current/ resistance, software configurable inputs available) Up to 20 (voltage/current/ resistance, software configurable inputs available) Up to 20 (voltage/current/ resistance, software configurable inputs available) Digital inputs Up to 16 (pull-up/pull-down, software configurable inputs available) Up to 7 (pull-up/pull-down, software configurable inputs available) Up to 54 (pull-up/pull-down, software configurable inputs available) Up to 44 (pull-up/pull-down, software configurable inputs available) Frequency inputs Up to 3 (pull-up software configurable) Up to 2 (pull-up software configurable) Up to 8 (pull-up software configurable / magnetoresistive sensors support) Up to 6 (pull-up software configurable) PWM outputs Up to 4 (all High side + Low side) Up to 2 (all High side + Low side) Up to 8 (High side / High side + Low side) Up to 6 (High side / High side + Low side) Digital outputs Up to 12 (High side / Low side) Up to 5 (High side / Low side) Up to 26 (High side / Low side) Up to 14 (High side / Low side) Output supply 5 Vdc 5 Vdc 5 Vdc - 8 Vdc 5 Vdc - 8 Vdc Communication 1 RS232 asincronous, 1 CAN bus compliant with CAN 2.0b specifications (SAE J1939 / ISO 11783 / ISO 11898) 1 RS232 asincronous, 1 CAN bus compliant with CAN 2.0b specifications (SAE J1939 / ISO 11783 / ISO 11898) 1 RS232 asincronous, 2 CAN bus compliant with CAN 2.0b specifications (SAE J1939 / ISO 11783 / ISO 11898) 1 RS232 asincronous, 2 CAN bus compliant with CAN 2.0b specifications (SAE J1939 / ISO 11783 / ISO 11898) Operating temperature -40/+85 °C -40/+85 °C -40/+85 °C -40/+85 °C Protection rating IP67 IP67 IP67 IP67 Electrical connections 56 pins board mounted 24 pins board mounted 110 pins board mounted 110 pins board mounted Housing material High temperature nylon (black) High temperature nylon (black) Aluminium Aluminium Dimensions 193 x 40 x 145 cm 119 x 35 x 133 cm 220 x 45 x 165 mm 220 x 45 x 165 mm 0.420 Kg 0.250 Kg 0.550 Kg 0.550 Kg HW Features SW Features INTERFACE GENERAL [for reference only] Weight [for reference only] All specifications can be subject to changes without prior advice by Carraro Drive Tech 25 26 Ax les 27 28 AGRICULTURAL EQUIPMENT AXLES 20.08 20.09 20.14 20.16 20.19 20.22 20.29 20.37 20.43 20.45 20.49 20.80 Maximum Gross Engine Power (ECE R24) 55 kW 75 HP 63 kW 85,7 HP 74 kW 100,6 HP 88 kW 120 HP 132 kW 180 HP 155 kW 211 HP 191 kW 259,8 HP 260 kW 353,6 HP Peak Torque @ Wheels 11,2 kNm 12,6 kNm 19,6 kNm 22,4 kNm 26,6 kNm 30,8 kNm 40,6 kNm 51,8 kNm 60,2 kNm 63 kNm 68,6 kNm 112 kNm Total Ratio 6,5:1 – 16,8:1 8:1 – 21,5:1 10:1 – 25,8:1 10,7:1 – 27,7:1 12:1 – 21:1 13,3:1 – 26,3:1 15,8:1 – 26,3:1 17,2:1 – 23,6:1 13,4:1 – 28,5:1 Dynamic Load Capacity * 24 kN 24 kN 36 kN 45 kN 55 kN 68 kN 80 kN 85 kN 110 kN Static Load Capacity ** 60 kN 60 kN 112,5 kN 137,5 kN 170 kN 200 kN 210 kN 275 kN Flange to Flange Distance 925 mm 990 mm 1155 mm 1555 mm 1175 mm 1325 mm 1460 mm 1640 mm 1640 mm 1800 mm 1900 mm 1900 mm 1940 mm 1900 mm 1940 mm 1890 mm Brakes (Optional) None Wet multi disc Wet multi disc Wet multi disc Wet multi disc Wet multi disc Wet multi disc Wet multi disc Dry brakes Dry brakes Dry brakes Differential Limited slip system Limited slip system Limited slip system Limited slip system Limited slip system Limited slip system Limited slip system Limited slip system › Reduced maintenance Mechanical diff. lock Mechanical diff. lock Mechanical diff. lock Mechanical diff. lock Wet clutch diff. lock Wet clutch diff. lock Wet clutch diff. lock Wet clutch diff. lock › Easy service Open Open Open Wet clutch diff. lock Open Open Open Open Optional Optional Optional Optional Axles for agricultural applications › The most complete range of steering drive axles designed for tractor power ratings from 35 to 350 HP Features › Wide range of ratios and track widths provides flexibility to virtually meet any application › Steering Angle up tp 55° › Robust monolithic structure › Optimized steering geometry › Optimized monolithic design ensures maximum strenght under high loads › Robust gear design for longer life and improved durability Advantages › Extreme adaptability to the final user’s most different needs thanks to the large number of options available › Precision steering › High standardization of the subcomponents adopted allows customers and dealers to make significant saving in spare parts storage space › Simplicity and rapidity of servicing thanks to the rational arrangement of the subcomponents which do not require special tooling 29 › Greater productivity Open Options Steering Sensor Optional Optional Optional Optional › Oil immerseed disc brakes * Front loader operation * * Ballasted vehicle & without implements › Self Locking and Multi disc differential lock All specifications can be subject to changes without prior advice by Carraro Drive Tech › Integrated steering sensor › Long life lubricated U-joints and availability of waterproof seals › Dry brakes 30 AGRICULTURAL EQUIPMENT Axles with electronically controlled suspension › A wide range of axles from 70 to 260 HP › A new integrated and revolutionary system of independent suspension with position control (patented by Carraro) › This system marks a radical development in the fourwheel drive market by ensuring the absorption of shocks induced to the vehicle by harsh ground conditions Features › Suspension range +/– 45 mm › Max pressure of control system 180 bar › Improved grip (+70% vs. rigid axle at sprung mass frequency) › Improved damping capacity › The wheels, independently supported by a double wishbone, maintain the vehicle’s set up even on rough terrain, while the hydropneumatic suspension provides a damping effect with wide load variation › Self-trimming function › This range of axles is completely interchangeable with the traditional type and does not require any modification to the chassis or transmission shaft Advantages AXLES 20.19SI 20.22SI 20.25SI 20.32SI 20.43SI 20.43S 20.49S Maximum Gross Engine Power (ECE R24) 88 kW 120 HP 103 kW 140 HP 155 kW 211 HP 155 kW 211 HP 191 kW 260 HP Peak Torque @ Wheels 26,6 kNm 30,8 kNm 35 kNm 44,8 kNm 60,2 kNm 60,2 kNm 68,6 kNm Total Ratio 10,7:1 – 27,7:1 13,4:1 – 28,5:1 13,4:1 – 28,5:1 15,8:1 – 26,3:1 15,8:1 – 26,3:1 Dynamic Load Capacity * 55 kN 65 kN 75 kN 80 kN 80 kN Static Load Capacity ** 137,5 kN 162,5 kN 187,5 kN 200 kN 200 kN Flange to Flange Distance 1910 mm 1850 mm 1890 mm 1900 mm 1940 mm 1892 mm 1892 mm Brakes (Optional) Wet multi disc Wet multi disc Wet multi disc Wet multi disc Wet multi disc Dry brakes Dry brakes Differential Limited slip Limited slip Limited slip Limited slip Limited slip Mechanical diff. lock Mechanical diff. lock Wet clutch diff. lock Wet clutch diff. lock Wet clutch diff. lock Open Open Open Open Open Optional Optional Optional Optional Optional › Suspension lock up Steering Sensor › Better handling › Precision steering › Higher cross-country speeds › Greater productivity › Greater comfort › Greater safety Options › Oil immerseed disc brakes › Multi disc differential lock › Integrated steering sensor › Dry brakes 31 * Front loader operation ** Ballasted vehicle & without implements All specifications can be subject to changes without prior advice by Carraro Drive Tech The Power Transmission Excellence is our Passion Carraro Drive Tech Spa Headquarters Via Olmo, 37 35011 Campodarsego (Padova), Italy T +39 049 9219111 F +39 049 9289111 [email protected] carrarodrivetech.com Project related installation drawings can be made available on request as dimensions and technical data are subject to change due to continuous development.