Rig brochure - Odfjell Drilling

The fleet
Mobile Offshore Drilling Units
Odfjell Drilling
4
Deepsea Aberdeen
5
Deepsea Stavanger
6
Deepsea Atlantic
7
Deepsea Bergen
8
Deepsea Metro I
9
Deepsea Metro II
10Guarapari
11Siri
12Itaoca
13
Island Innovator
Odfjell Drilling has 40 years of offshore drilling experience from the operation of fixed and mobile installations, including semi-submersibles, jack-ups, drillships
and modular units – in most parts of the world.
Odfjell Drilling’s three service areas all take part in
keeping our semi-submersible drilling operations at the
forefront of the industry, in terms of both operations
and technology.
We believe QHSE is a tool for continuously improving
operations, and we have adopted a “zero fault philosophy” as the main goal for our Corporate Management
System. The objective is to achieve a zero fault situation.
Our harsh environment rigs have Norwegian AOC certificates. They are built and maintained to meet stringent
North Sea regulatory requirements and the challenges
of drilling under the most demanding environmental
conditions worldwide.
2
The environment – a vital priority
All our newbuilds are designed for environmentally
sensitive areas, and the utmost importance has been
attached to zero discharge, low emissions and electrical
solutions to reduce onboard oil volumes and associated
pollution risks.
Deepsea Aberdeen is an enhanced
GVA7500 harsh environment design and
will be a sister rig to the Deepsea Atlantic
and Deepsea Stavanger, both previously
delivered from DSME.
The semi-submersible will be delivered
from the yard in May 2014 and will subsequently start drilling operations under
a 7-year contract with BP in the West of
Shetland area.
The unit is designed for operations in harsh
environments and at water depths of up to
3,000 m.
It is equipped with a full conventional mooring spread for operations in water depths
of 70 to 500 metres. The 7,500 mt loading
capacity in all operating conditions ensures
efficiency, with a reduced need for supply.
Additionally, full winterization may be
provided for improved working conditions in
an arctic environment.
The rig has a state-of-the-art, highly efficient drilling system, which includes a dual
derrick with a main and an auxiliary work
centre to facilitate a number of simultaneous operations. The drilling system has dual
active heave compensating drawworks for
increased performance, efficiency, safety
and redundancy. The rig is designed for
worldwide operation and will be especially
suitable for development drilling.
Deepsea Aberdeen
The unit is designed for operations in
harsh environments and at water depths
of up to 3,000 m. It is equipped with a
full conventional mooring spread for
operations in water depths of 70 to 500
metres. The 7,500 mt loading capacity in
all operating conditions ensures efficiency,
with a reduced need for supply. Additionally,
full winterization may be provided for
improved working conditions in an arctic
environment.
worldwide operation and will be especially
suitable for development drilling. The rig
meets the latest regulatory requirements of
Norwegian NMD & PSA/UK HSE & NORSOK.
The rig has a state-of-the-art, highly efficient drilling system, which includes a dual
derrick with a main and an auxiliary work
centre to facilitate a number of simultaneous operations. The drilling system has dual
active heave compensating drawworks for
increased performance, efficiency, safety
and redundancy. The rig is designed for
Deepsea Stavanger
Year of construction 2014
4
Deepsea Stavanger is a sixth generation deepwater and harsh environment
semi-submersible. This unit, along with its
sister rig Deepsea Atlantic and Deepsea
Aberdeen, is a state-of-the-art dual derrick,
dynamic-positioned unit of enhanced GVA
7500 design.
Year of construction 2010
Name
Deepsea Aberdeen
Name
Deepsea Stavanger
Manager
Odfjell Drilling
Manager
Odfjell Drilling
Ownership
Odfjell Drilling (100%)
Ownership
Odfjell Drilling (100%)
Type
Semi-submersible
Type
Semi-submersible
Design
GVA 7500 (enhanced)
Design
GVA 7500 (enhanced)
Construction Yard
DSME South Korea
Construction Yard
DSME South Korea
Classification
DNV
Classification
DNV
Water Depth Capacity
10000 ft
Water Depth Capacity
10000 ft
Station Keeping
8 x 2400 m chain, 84 mm R5
Station Keeping
DP
VDL (Moored)
7500 (6000) mt
VDL (Moored)
7500 (6000) mt
Accomodation
158
Accomodation
190
Derrick
Dual 1000ton/500ton
Derrick
Dual 1000ton/500ton
Drawworks
Dual AHD + Single AHD
Drawworks
Dual AHD + Single AHD
Mud Pumps
4 x 14-P-220, 7500psi
Mud Pumps
4 x 14-P-220, 7500psi
Top Drive
HPS-1000
Top Drive
HPS-1000
BOP (All 18-3/4”, 15K)
MUX 6 ram+ Hydr 5 ram
BOP (All 18-3/4”, 15K)
Shaffer MUX 6 ram
5
Deepsea Atlantic is a sixth generation
deepwater and harsh environment
semi-submersible. This unit, along with its
sister rig Deepsea Stavanger and Deepsea
Aberdeen, is a state-of-the-art dual derrick,
dynamic-positioned unit of enhanced GVA
7500 design.
The unit is designed for operations in
harsh environments and at water depths
of up to 3,000 m. It is equipped with a
full conventional mooring spread for
operations in water depths of 70 to 500
metres. The 7,500 mt loading capacity in
all operating conditions ensures efficiency,
with a reduced need for supply. Additionally,
full winterization may be provided for
improved working conditions in an arctic
environment.
worldwide operation and will be especially
suitable for development drilling. The rig
meets the latest regulatory requirements of
Norwegian NMD & PSA/UK HSE & NORSOK.
The rig has a state-of-the-art, highly efficient drilling system, which includes a dual
derrick with a main and an auxiliary work
centre to facilitate a number of simultaneous operations. The drilling system has dual
active heave compensating drawworks for
increased performance, efficiency, safety
and redundancy. The rig is designed for
The semi-submersible drilling rig Deepsea
Bergen is a self propelled semi semi-submersible unit of enhanced Aker H-3.2
design. The rig was delivered in 1983 and
has operated mainly in the Norwegian
sector of the North Sea since its launch.
The rig was upgraded in 2012. The upgrade
included increased living quarter capacity
and improved BOP handling facilities.
Deepsea Atlantic
Deepsea Bergen
Year of construction 2009
Year of construction 1983 / 2012 upgrade
6
Name
Deepsea Atlantic
Name
Deepsea Bergen
Manager
Odfjell Drilling
Manager
Odfjell Drilling
Ownership
Odfjell Drilling (100%)
Ownership
Odfjell Drilling (100%)
Type
Semi-submersible
Type
Semi-submersible
Design
GVA 7500 (enhanced)
Design
Aker H-3.2 (enhanced)
Construction Yard
DSME South Korea
Construction Yard
Aker Norway
Classification
DNV
Classification
DNV
Water Depth Capacity
10000 ft
Water Depth Capacity
1500 ft
Station Keeping
8 x 2100 m chain, 84 mm R5
Station Keeping
76 mm R4 chain
VDL (Moored)
7500 (6500) mt
VDL (Moored)
3500 mt
Accomodation
158 (128)
Accomodation
110
Derrick
Dual 1000ton/500ton
Derrick
Single 650ton
Drawworks
Dual AHD + Single AHD
Drawworks
National 1625 UDBE
Mud Pumps
4 x 14-P-220, 7500psi
Mud Pumps
3 x 12-P-160, 5000psi
Top Drive
HPS-1000
Top Drive
TDS-4S
BOP (All 18-3/4”, 15K)
Cameron EVO 4 ram
BOP (All 18-3/4”, 15K)
NL Shaffer 18 3/4” x 15.000 psi
7
Deepsea Metro I is an ultra deep water
Gusto P10000 Design drillship delivered by
Hyundai Heavy Industries in South Korea in
June 2011.
The drillship is designed for operations in
water depths of up to 10,000 feet and may
be upgraded to 12,000 feet. The vessels
incorporate state-of-the-art technology
for safe and efficient operations in ultra
deep water. They have large deck areas and
storage capacities (topside/hull) that are
especially favourable in combination with
high transit speeds. The vessels comply
Deepsea Metro II is an ultra deepwater
Gusto P10000 Design drillship delivered by
Hyundai Heavy Industries (HHI) in South
Korea in 2011.
with international rules and regulations for
operations worldwide, except for harsh environment areas. The units carry the following class notation: DNV + 1A1 Ship-shaped
Drilling Unit, BIS, EO, DYNPOSAUTRO, DRILL,
CRANE, HELDK.
The drillship is designed for operations in
water depths of up to 10,000 feet and may
be upgraded to 12,000 feet. The vessels
incorporate state-of-the-art technology
for safe and efficient operations in ultra
deep water. They have large deck areas and
storage capacities (topside/hull) that are
especially ffavourable in combination with
high transit speeds. The vessels comply
with international rules and regulations for
operations worldwide, except for harsh environment areas. The units carry the following class notation: DNV + 1A1 Ship-shaped
Drilling Unit, BIS, EO, DYNPOSAUTRO, DRILL,
CRANE, HELDK.
Deepsea Metro I
Deepsea Metro II
Year of construction 2011
Year of construction 2011
8
Name
Deepsea Metro I
Name
Deepsea Metro II
Manager
Odfjell Drilling
Manager
Odfjell Drilling
Ownership
Odfjell Drilling (40%)
Ownership
Odfjell Drilling (40%)
Type
Drillship
Type
Drillship
Design
Gusto P10000
Design
Gusto P10000
Construction Yard
HHI South Korea
Construction Yard
HHI South Korea
Classification
DNV
Classification
DNV
Water Depth Capacity
10000 ft
Water Depth Capacity
10000 ft
Station Keeping
6 x 5.5 Mw retract. thrusters
Station Keeping
6 x 5.5 Mw retract. thrusters
VDL
20000 mt
VDL
20000 mt
Accomodation
210
Accomodation
210
Derrick
Dual 1000ton/750ton
Derrick
Dual 1000ton/750ton
Drawworks
AHD, 6900/5750HP
Drawworks
AHD, 6900/5750HP
Mud Pumps
4 x 14-P-220, 7500psi
Mud Pumps
4 x 14-P-220, 7500psi
Top Drive
TDS1000 + TDS8
Top Drive
TDS1000 + TDS8
BOP (All 18-3/4”, 15K)
Hydril MUX
BOP (All 18-3/4”, 15K)
Hydril MUX
9
Guarapari is an ultra deep water Jurong
Espadon design drillship and is scheduled
to be delivered by Estaleiro Jurong Aracruz,
located in the state of Espirito Santo, in
September 2016.
The drillship incorporates state-of-the-art
technology for safe and efficient operations
in ultra deep water and complies with
international rules and regulations for
operations worldwide.
Odfjell Galvão and SETE Brasil share joint
ownership of the state-of-the-art ultra
deep water drillship. Odfjell Galvão has a
20% ownership share in the Guarapari.
Siri is an ultra deep water Jurong Espadon
design drillship and is scheduled to be delivered by Estaleiro Jurong Aracruz, located in
the state of Espirito Santo, in June 2017.
Odfjell Galvão and SETE Brasil share joint
ownership of the state-of-the-art ultra
deep water drillship. Odfjell Galvão has a
20% ownership share in the Siri.
Guarapari is on a 15-year contract for
Petrobras in Brazil, with a 5-year option.
The drillship incorporates state-of-the-art
technology for safe and efficient operations
in ultra deep water and complies with
international rules and regulations for
operations worldwide.
Siri is on a 15-year contract for Petrobras in
Brazil, with a 5-year option.
Guarapari
Siri
Year of construction 2016
Year of construction 2017
10
Name
Guarapari
Name
Siri
Manager
Odfjell Drilling
Manager
Odfjell Drilling
Ownership
Odfjell Drilling (10%)
Ownership
Odfjell Drilling (10%)
Type
Drillship
Type
Drillship
Design
Jurong Espadon drillship design
Design
Jurong Espadon drillship design
Construction Yard
Estaleiro Jurong Aracruz
Construction Yard
Estaleiro Jurong Aracruz
Classification
ABS
Classification
ABS
Water Depth Capacity
10000 ft
Water Depth Capacity
10000 ft
Station Keeping
DP3
Station Keeping
DP3
VDL
15000t (min)
VDL
15000t (min)
Accomodation
180
Accomodation
180
Derrick
Single
Derrick
Single
Drawworks
Aker Wirth GH6000EGAC
Drawworks
Aker Wirth GH6000EGAC
Mud Pumps
Aker Wirth TPK 2200 4 x 7500psi
Mud Pumps
Aker Wirth TPK 2200 4 x 7500psi
Top Drive
Aker DDM-1000-AC
Top Drive
Aker DDM-1000-AC
BOP (All 18-3/4”, 15K)
Cameron EVO
BOP (All 18-3/4”, 15K)
Cameron EVO
11
Itaoca is an ultra deep water Jurong
Espadon design drillship and is scheduled
to be delivered by Estaleiro Jurong Aracruz,
located in the state of Espirito Santo, in
March 2018.
The drillship incorporates state-of-the-art
technology for safe and efficient operations
in ultra deep water and complies with
international rules and regulations for
operations worldwide.
Odfjell Drilling has an agreement with
Marine Accurate Well ASA (Maracc) for the
operation, project follow-up and marketing
of the rig Island Innovator, which will
be ready for drilling operations on the
Norwegian Continental Shelf in 2013.
Odfjell Galvão and SETE Brasil share joint
ownership of the state-of-the-art ultra
deep water drillship. Odfjell Galvão has a
20% ownership share in the Siri.
Itaoca is on a 15-year contract for Petrobras
in Brazil, with a 5-year option.
Odfjell Drilling is responsible for management including crew, quality systems and
technical operation.
Itaoca
Island Innovator
Year of construction 2018
Year of construction 2013
12
Name
Itaoca
Name
Island Innovator
Manager
Odfjell Drilling
Manager
Odfjell Drilling
Ownership
Odfjell Drilling (10%)
Ownership
Maracc ASA
Type
Drillship
Type
Semi Submersible
Design
Jurong / LMG
Design
Global Maritime GM 4000
Construction Yard
Estaleiro Jurong Aracruz
Construction Yard
Cosco Shipyard, Qidong, China
Classification
ABS
Classification
DNV
Water Depth Capacity
10000 ft
Water Depth Capacity
4000 ft
Station Keeping
DP3
Station Keeping
DP3 / ATA
VDL
15000t (min)
VDL (Moored)
4500 mt
Accomodation
180
Accomodation
120
Derrick
Single
Derrick
Single, setback at lower deck
Drawworks
Aker Wirth GH6000EGAC
Drawworks
NOV cylinder rig
Mud Pumps
Aker Wirth TPK 2200 4 x 7500psi
Mud Pumps
3 x 14-P-220, 7500psi
Top Drive
Aker DDM-1000-AC
Top Drive
HPS 650
BOP (All 18-3/4”, 15K)
Cameron EVO
BOP (All 18-3/4”, 15K)
Cameron EVO 5 ram
13
Odfjell Drilling
Sandslimarka 63
P.O. Box 33 Kokstad
NO-5863 Bergen
Norway
www.odfjelldrilling.com
design by Colours.no
14