Financed by National Fund for Environmental Protection and Water
Transcription
Financed by National Fund for Environmental Protection and Water
Financed by National Fund for Environmental Protection and Water Management Foreword A global market of environmentally sound solutions and technologies is mainly based on services rendered to institutional customers, companies or public institutions. This is one of the reasons why the Government’s support can be particularly helpful in enhancing the opportunities for the best technologies, and why this topic is one of the priorities of the Ministry of the Environment. In developing countries, technology procurement is supported by aid funds, and the countries which offer such aid additionally support their own companies. The development of technologies is based, inter alia, on the results of research and development projects, and needs substantial investment outlays. Therefore, those entities that have enjoyed their first success should be supported, or they should be offered substantial help in achieving such a success. printed on ecological paper GreenEvo – The Green Technology Accelerator Project is a response to this situation. It is a platform for the activities of different entities which – using this tool – can help us determine and identify Poland’s potential in the area of environmental technologies, and the opportunities for their promotion abroad. Through an analysis of the domestic market and the measures to support comprehensive development of technologies, the Project supports them, so that they may compete on foreign markets at this time of global, green transformations. Professor Andrzej Kraszewski Minister of the Environment 3 The market for environmental technologies in Poland The market for environmental technologies in Poland The market for environmental technologies in Poland Poland is one of the largest EU member states which in recent 20 years underwent a successful transition toward green economy based on knowledge and innovation. The country of about 38 million inhabitants is the largest economy in Central It is they who promote the dynamic economic development and global is invested by local companies in the green technologies market and services. Economists and international business managers pay attention to another and Eastern Europe. As many as 50% of students Poles gain a university expansion of innovative companies. According to the analysis of the European The average level of investment for European Union countries is only 0.10% important feature of Polish economy: relatively low labour costs compared degree. In this respect, Poland overtakes almost all OECD member countries, Statistical Office, Polish companies reach up to 13.5% of revenues from of GDP. Pro-environmental investments of Polish companies are 4.5 times to the situation in other developed countries. The most modern technological except for much smaller Finland, Iceland and the Slovak Republic (data the sale of innovative products, a level comparable to the most developed higher than investments of German and French companies, 2.5 times higher solutions, developed in Poland, can cost less than similar technologies from for 2008, OECD). The total number of students in Poland has remained close countries of western Europe (data for 2004, Eurostat). than Swedish companies about 3 times higher than Finnish, Spanish, British other countries. to the level of major European economies, such as Germany, France, Britain Poland is leading among the developed economies in terms of the impact and Italian companies (data for 2006, Eurostat). and Italy. Therefore, there is more than 7 times more Polish students than of innovation on efficiency of energy and material. As many as 11.6% During the economic slowdown in 2009, the most difficult for Western students in Finland, 9 times more than in Denmark and 10 times more than of Polish enterprises recorded a substantial gain in this area, which is well above countries, Poland remained the only green item on the economic map in Switzerland. Every ninth student in the European Union is a Pole (data the average for the European Union and the results for the countries of Europe and despite the global crisis, it was the only European economy for 2007, Eurostat). of Western Europe (data for 2006, Eurostat). which experienced GDP growth. Polish society and business appreciate the importance of knowledge, science It should come as no surprise that Polish industry invests in the environmental and technology. Local businesses incur substantial investments in research protection a much larger proportion of the Gross Domestic Product than their and development, which result in impressive innovative achievements. industrial counterparts in other countries. As much as 0.28% of Polish GDP 6 7 The market for environmental technologies in Poland The market for environmental technologies in Poland Poland is synonymous with stability, dynamic economic development, innovation and ecology. Country Polish suppliers of green technologies offer tested, innovative solutions, including wastewater has about 38 million well-educated residents and is one of the largest economies in the European Union. treatment, water treatment, hazardous waste treatment and renewable energy sources. Every ninth student in the European Union is a Pole. The effectiveness of green innovation is among the highest in Europe. Polish companies invest in the field of environmental protection more than The best technologies have been selected by the Ministry of Environment under the Green companies of the largest economies. So whom it is best to ask for help in solving the challenges Technology Accelerator GreenEvo, supporting their international transfer. We hope that Polish of environmental protection, if not the most innovative Polish providers of green technology? experience in the environmental field will help solve your problems. Polish solutions promoting environmental protection are based on difficult companies are dominant. Their main export directions are the neighbouring and hass been developed in Poland particularly well, should not be omitted. experience related to the systemic transformation period of the 1990s. Twenty countries which keep particularly close economic relations with Poland: Polish companies, through international patents, control the key technologies years ago, Poland faced huge environmental problems. Years of intensive Germany, Russia, Ukraine, Austria, the Czech Republic and Lithuania. Polish of production of gallium nitride, a material used to produce light emitting research and development, investment in innovation and creativity of Polish exporters of green technology, however, are also active in other countries diodes (LEDs), or new, energy-efficient light sources, while native exporters engineers helped to cope with this unwanted legacy of the previous era. of the European Union, Community of Independent States, Asia are able to use their unique knowledge and competence in this area. So it should not come as a surprise that the most important Polish innovations and the Middle East. Polish government institutions became involved in indigenous development in green technologies relate to those areas which posed particularly pressing It is enough to mention examples of spectacular implementation of green technology industry. Green Technology Accelerator GreenEvo problem for the Polish economy several years ago: water treatment, hazardous of Polish sewage treatment technologies in China, installation of Polish was organized by the Ministry of the Environment in order to select the best waste management, reduction of emissions and renewable energy sources. water treatment technologies in Western Europe, or demand for Polish Polish solutions and promote their international transfer. Companies, whose innovative technologies promoting disposal of hazardous waste, including technologies were GreenEvo winners, offer tested and innovative solutions The Ministry of Environment has identified 510 companies operating pesticides, mercury and sulphur requested by clients from various regions and are perceived by Polish government as experienced and trustworthy in Poland that provide green technology. The vast majority of them, as many of the world. Poland is a European solar collector region - collectors suppliers. Polish side is willing to help other countries by sharing its experience as 94%, operate on the basis of local capital and research and development developed and manufactured in Poland reach customers from all continents. in the field of environmental protection and examples of best practice staff members. The industry employs about 25,000 workers. Small, innovative Lastly, the field of optoelectronics, which is conducive to energy saving and providing innovative technologies. 8 9 GREENEVO GreenEvo The Ministry of the Environment has been implementing the GreenEvo project - Green Technology Accelerator. It aims at international transfer of innovative pro-ecological technologies and promotion of Polish technical thought throughout the world. Within the framework of the project, the Ministry identified the best Polish solutions, including: • • wastewater and water treatment technologies tested by Western European cities and implemented in Beijing (Biogradex Holding LTD, Wofil Robert Muszański, PP-EKO LTD) innovative hazardous waste treatment technologies, (Ecotech Poland LTD, PPHU MARBET-WIL LTD) In the above-mentioned areas, Polish industry of environmental technologies Poland, as a country with significant experience in the system transformation plays an important role on the global market and offers tested, innovative process, is well aware that without adequate funds for effective solutions. and innovative environmental technologies, sustainable development solutions supporting the use of renewable energy sources, including agricultural briquette-making machines and solar panels, (Asket Roman Długi, Sunex LTD, Watt LTD, Neon Wojciech Norberciak) The main objective of GreenEvo is to provide international markets with is not possible. GreenEvo® trademark presents the load of Polish experience a guaranteed quality of Polish environmental technologies. The project and willingness to share it with countries taking similar modernization actions. involved carrying out studies of selected international markets and identifying Moreover, it guarantees the quality of Polish technologies. The winners needs of the countries to which technologies are transferred. of the project comprise a group of the best and most innovative providers • technologies for coking industry (Energoinstal) Polish companies selected for the GreenEvo project have undergone a series of green technologies being developed in Poland. • energy-saving technologies (Promar LTD, LEDIKO Walendowski i Wilanowski, Petroster) products in a competitive manner, they have been educated in the terms • of specialized trainings. They have been well prepared for managing their of specific legal regulations as well as technical standards applicable on those markets. One can certainly say that the winners of the GreenEvo project are ready to share their technologies, experience and expertise with countries that face environmental problems. 10 11 Laureates of GreenEvo - Technology Accelerator project The list of companies Company Name Omnia subiecta sunt naturae 12 Asket 14 Biogradex 16 Ecotech 18 Energoinstal 20 Lediko 22 Marbetwil 24 Neon 26 Petroster 28 PP-Eko 30 Promar 32 Sunex 34 Watt 36 Wofil 38 asket roman długi Golden coal wherever you want it BIOMASSER® mobile devices for the production of Golden Coal® from straw and hay can reach any place where the raw material is stored. From now on, straw and hay briquettes can be produced anywhere - directly at a stack in an open field, on a dirt road or in a barn. What’s more, BIOMASSER® briquettes agro-biomass without the need for drying. And all that at the lowest cost of purchase and operation of machinery. • The machines are easy to use and require no special qualifications. The BIOMASSER® Technology includes briquetting of straw at a humidity The latest solution offered by Asket Roman Długi is the BIOMASSER® rate of 15%-30% without the need for prior drying. BIOMASSER® briquettes MOBILE line. This is a complete set of equipment for briquetting built natural raw materials without the addition of adhesives, binders and similar on a trailer wheel. BIOMASSER® MOBILE is designed for briquetting straw substances. The result is one hundred percent ecological heating fuel and grass in the field, directly at the stack. The production line consists • You do not need to dry the raw material before briquetting, which eliminates the risk of fire hazard. • Low costs of purchasing and maintenance of the dryer. - straw briquettes called the “golden coal.” Consumption of electricity of a feeding table for bales of straw, a chopper, chaff containers in the whole production process is very low. Depending on the size and a briquetting machine. The machines are powered from the electricity of the system, on average, it amounts to 40÷70 kWh per 1 ton of briquette. network or an engine-generator. The latest BIOMASSER® MOBILE line, This technology is based on the principle of compression of crushed biomass manufactured for a customer from Sweden, is powered from an engine- delivered to the screw chamber of the briquetting machine, which is pushed generator mounted on a wheeled trailer. Its output is as much as 420 kg/h! outside in the form of briquettes. “ Incineration creates a closed loop biomass carbon in nature, and therefore does not contribute to its growth in the atmosphere. The residual ash after burning is not harmful and is ideal for fertilizing gardens, lawns and fields. [Asket, 2010] “ Most of the biomass occurs in rural areas in developing countries, where half the world’s population lives. For example, in Kenya 75%, in India - 50%, China 33% and Brazil - 25% of total energy comes from biomass. Industrialized countries also receive substantial amounts of energy from biomass, such as Finland (18%), Ireland (16%), Sweden (9%) and the United States (3%). The briquetting technology of damp agro-biomass BIOMASSER® is used in plants for the compaction of agricultural waste, mainly straw and grass, intended for energy purposes. Contact details: ASKET Barbara Pokrzywa 61-362 Poznań, 12a Forteczna St. Direct phone: +48 61 879 33 93 e-mail: [email protected] www.asket.pl [D. O. Hall and Patricia A. Moss, Biomass for energy in developing countries] 15 Biogradex Holding LTD Application of the BIOGRADEX® technology allows elimination of liquid impurities. This innovative solution intensifies the process of wastewater treatment several times using the activated sludge method. The BIOGRADEX® vacuum technology is a new, higher, global level of wastewater treatment and a clean benefit to the environment. • The company holds a patent for the described technology. The company holds appropriate patents for this technology not only Polish, but also European, American, Canadian, Australian, Brazilian, Russian and Japanese. BIOGRADEX® is an innovative solution, which sets new standards for wastewater treatment. • In comparison with other technologies, Biogradex® increases the amount of activated sludge in the chambers by 80-100% and thus, the efficiency of a wastewater treatment process is considerably improved. • With the increased amount of activated sludge, the treatment process is very effective at low rate of energy consumption. • The technology is cheaper than the solutions commonly used in the world, because it reduces the volume of buildings under construction. And in the case of upgrading of the existing sewage treatment plants, BIOGRADEX® can increase their productivity and efficiency. Golden coal wherever you want it “ The European Union countries must achieve a good status of all waters by 2015 under the Water Framework Directive of 2000. [Gazeta Prawna 12.02.2010] Outside Poland, Biogradex Holding Sp. z o.o. modernized a Q = 20000m3/d plant in Estonia and a Q=120000m3/d treatment plant in Beijing. Currently, offers for facilities in South Korea with the capacity of 180-500,000m3 are being prepared. The technology has been awarded by the President of the National Fund for Environmental Protection (NFOŚ) at the POLEKO 2002 Fair, and received the title of “The best water purification technology”. [Grupa BIZNES POLSKA, 2010] BIOGRADEX® is a unique method of wastewater treatment using the activated a satisfactory result in the removal of nitrogen. 7 days after the implementa- sludge method. It enables effective protection of water against pollution. tion, the requested result was obtained due to increasing the concentration The uniqueness of the BIOGRADEX® technology involves the application of activated sludge in the chambers to 6 kg/m3. BIOGRADEX® is mounted of additional physical treatment in the wastewater treatment process - on one of the four routes with the flow of Q = 120,000 m3/d, whose calculation a vacuum system is used in order to degas a mixture of activated sludge prior flow for the existing technology was Q = 90 000 m3/d. Thus, the BIOGRADEX® to its introduction to the secondary settling tank. As a result of this treatment, technology, despite the overload, has obtained better results than sludge flocs and liquid are removed from gas bubbles, which allows the technology operating on the parallel route, where the flow [...] in some developing countries, water resources are not only contaminated by toxic substances discharged by people, but also by arsenic and other poison naturally occurring in underground water reservoirs. for increasing the amount of sediment in the process to MLSS = 7000-9000 was Q = 90 000 m3/d. [National Academy of Engineering] BIOGRADEX® technology successfully operates at the sewage treatment “ mg/l and effective sedimentation in the secondary settling tank. Contact details: plant in Beijing. It has been designed and installed there in cooperation with Overcoming the crisis of water and sanitation is one of the main challenges of the developing society of the 21st century. a Chinese partner. The treatment plant in Beijing was built in 2004, and prior to the implementation of the new technology, it had difficulty obtaining Andrzej Nazar 82-300 Elbląg, Robotnicza 55 St., with a note “Przegródka 12” Direct phone: + 48 55 239 43 03 e-mail: [email protected] www.biogradex.pl [United Nations Development Programme. 2006] 17 Ecotech Poland LTD Omnia subiecta sunt naturae It is a real breakthrough in the field of neutralisation of hazardous and toxic waste. The innovative EnviroMix® technology - patented in the EU and the USA - does not require high investment expenditure and ensures a lifetime guarantee of safety to the natural environment. EnviroMix® is an efficient and cost effective method of chemical fixation and stabilization of waste. • Excellent efficiency of the technology, e.g. in relation to heavy metals, chlorinated pesticides, cyanide or PAHs. The process of stabilisation, which the EnviroMix® process is based on, This technology is also particularly interesting due to the tightening is a worldwide recognised technology. It ensures excellent results in chemical of the EU law provisions governing the neutralisation and storage bonding and stabilisation of hazardous waste. The use of such stability of hazardous and industrial waste. European regulations require that waste measures meets regulatory requirements in many countries and is supported be neutralised prior to storage and, if possible, first undergo the recycling by independent academic research. The EnviroMix® process is used process at their source. • Due to the specific character of binding pollutants by magnesium compounds, the EnviroMix® technology is resistant to secondary washing of pollutants over time. • The main distinguishing feature of the technology is the lifetime guarantee of safety of stabilised waste to the environment and that it considerably reduces the need for a stabilising material in relation to the waste unit mass. on an industrial scale for processing thousands of tons of contaminated soils, sediments, Mission: neutralise and recover! mine waste and by-products of industrial processes. The application of the process allows for neutralising of contaminated soil, The EnviroMix® technology uses standard equipment used in the industry, therefore it can also be used in mobile systems. sludge and other solid waste containing both organic and inorganic compounds and minerals. The waste-free EnviroMix® process has been recognised as the leading process of binding and stabilising many types of hazardous waste. It represents a breakthrough in the field of neutralisation of waste. The stabilization of hazardous waste using the EnviroMix® technology is much more effective than the currently applied methods, which are based “ “ [PRO EKO Polska Grupa Recyklingu] [PRO EKO Polska Grupa Recyklingu] A plastic bottle thrown in the woods can be decomposed in the ground after 500 years, a chewing gum after 5 years, and cigarette butts after 2 years. Methane released from landfills is 27 times more aggressive than carbon dioxide. on the use of Portland cement. Contact details: Marek Bukała 05-092 Łomianki, Warszawska 31 St. Mobile phone: +48 509 038 848 e-mail: [email protected] Dominik Wojewódka 05-092 Łomianki, Warszawska 31 St. Mobile phone: +48 512 462 337 e.mail: [email protected] www.ecotech.com.pl 19 Energoinstal PURE ENERGY FROM GAS AND DUST Now, each plant producing coke using the dry cooling method can effectively solve the problem of emissions of harmful dust and gases into the environment through the use of natural gas production waste for energy production. It is just enough to implement the technology of drawing, cleaning and combustion of gases in the steam boiler offered by Energoinstal S.A. to significantly reduce emissions. Using dust and gas for energy production purposes is clear profit. Let us not allow pollution to destroy the environment - let us change it into clean energy! • The technology allows the use of energy from process gases, which will cover the current and future demand, without increasing the greenhouse effect. It allows to save non-renewable primary energy resources in the form of fossil fuels, while complying with the guidelines of the European Commission of 10 January 2007. The essence of the technology offered by Energoinstal S.A. is the use Thermal utilisation allowed to achieve the following strategic production of process waste gases for energy production purposes. This method objectives of the coke plant using the stream of collected fuel gas effectively uses waste gases discharged into the atmosphere, polluting mixture: process steam, heating steam, heat for the district heating network, the environment, such as excess gases, and also uses process coke gas after and ultimately generation of electric energy of 1921 MW. • It allows reduction of a number of gas and dust pollutants discharged into the atmosphere. • Disposal of excess gas enables the achievement of additional energy benefits. low pressure cleaning to co-generate heat and electric energy. In the classic technology, excess gas is carried through the so-called “cold stack” or burned in a coke gas flare. The technology of Energoinstal S.A. reduces the emission of dust and gas and several other pollutants into the atmosphere. The flagship implementation in this area is the construction of the Heat “ “ [CLEAN AIR Mines Bulletin No. 28] [Jerzy Strzycki, Koksownia Przyjaźń Sp z o.o.] Reducing emissions from municipal sources is one of the EU directives on air quality. Meanwhile, the measurements made in urban and rural areas of Upper Silesia and Cracow show that as much as 60 percent of average annual emission comes from municipal sources, while in winter it rises to 90 percent. A pioneering at a European scale solution for co-incineration of waste gases from coke dry quenching plants and coke oven gas is the most reasonable and justified, not only in terms of environment, but also economically. and Power Station at “Przyjaźń” Coke Plant completed in 2007. Energoinstal S.A. acted as the General Contractor of the investment. The excess gas management method used at “Przyjaźń” Coke Plant provides great energy and environmental benefits. Contact details: Adam Troszka 40-203 Katowice, 188d Roździeńskiego Ave Direct phone: +48 32 735 73 74 Mobile phone: +48 696 038 153 e-mail: [email protected] Joanna Jeż Direct phone.: +48 32 735 72 10 Mobile phone: +48 668 272 402 e-mail: [email protected] www.energoinstal.pl 21 Lediko Walendowski & Wilanowski We save energy resources for future generations, but we must not at the same time give up the comfort and security provided by permanent lighting of streets, parks, company premises or offices. We just need to use smart CLEVEO street lights which allow additional savings. And all this with a digital controller and an innovative optical system offered by LEDIKO Walendowski i Wilanowski Sp. j. Bright energy saving and control “ “ Currently, the LED technology is one of the most advanced and fastest growing technologies. As a result, LEDs have improved features and their benefits are increasingly visible by the year. USD 15 billion - this is the value of the market of products using LEDs in 2013. Today, the best white LEDs are more than ten times more efficient than standard bulbs. Everything indicates that we are approaching a real revolution in lighting technology. [Gazeta.pl Technologies 05/28/2010] [Lediko] • 40% of additional energy, as compared with standard LED lamps, obtained by the controller deployed in the CLEVEO technology. • The lamps can be powered by solar panels or wind turbines. • Low glare factor obtained of light into the frame. by recessing the source • CLEVEO lamps are environmentally friendly, are characterized by low energy consumption and are manufactured using safe materials. • The built-in digital controller is the brain and the greatest attribute of the CLEVEO lamp. It intelligently controls the operation of the lamp, thanks to which it has unique functionality, uses less power and can work much longer. The controller ensures that the lamp generates constant, defined luminous flux regardless of the prevailing conditions. The controller has an automatic energy saving function in the late night hours, and the function of ageing and thermalcompensation. CLEVEO LED street lamps are intelligent and economical in operation. The structure of the module makes use of a patented solution, which They are universally applicable and have very good technical parameters. ensures even distribution of light on the street and minimizes lighting loss By combining a unique optical system with built-in digital control, outside the street. The optical system consists of LEDs, each of which is set the innovative lamp with high performance and unique functionality at a different angle. This allows a unique opportunity to direct light exactly was developed. where it is desirable. Thus more quantity of light falls on the street, The sources of light in the CLEVEO lamp are LEDs manufactured illuminationis more uniform and the comfort and safety of street users by a recognized and branded company - CREE. These are modern sources is increased. of light with high lighting efficiency, reliability and long life. Thanks to them, it is possible to obtain optimal illumination while using less energy. LEDs used in the lamps have a high - given the standards for street lighting - colour rendering index, which directly translates into improved visibility on the street. The heart of CLEVEO lamps is the LED module with an optical system. Contact details: Piotr Walendowski 54-413 Wrocław, 125 Klecińska St. Direct phone: +48 71 7985 785 Mobile phone: +48 663 17 22 29 e-mail: [email protected] www.lediko.com 23 PPHU MARBET-WIL LTD Yesterday dangerous, useful today Caring for a clean environment is something more than just an effective way to dispose of waste. Processing waste into useful products is a real art. The SULTECH® technology is a unique method for stabilising waste in polymer concrete. In this way we keep a clean environment, while gaining an excellent thermoplastic material with unusual integrity and resistance to frost and very low absorption level. • Very good mechanical properties (high compressive and bending strength), exceeding those of the corresponding Portland concrete. PPHU MARBET-WIL LTD offers original technical and technological The resulting SULTECH® polymer concrete containing waste is an inert patented solutions, allowing recovery of hazardous industrial waste and perfect thermoplastic material (which can be processed several times), containing heavy metals in solid form (powders, granules, etc.) by stabilisation which can be used to form a lot of very good products. Examples include using sulphur polymer in SULTECH® polymer concrete. This technology allows drainage channels, NOE® flood boards, drainage chamber elements, conversion of waste into useful products. The process of stabilisation pavement slabs, roads and motorway elements, railway system weights etc. • Waste-free production. • Expansion coefficient comparable to concrete based on Portland cement. is particularly useful for stabilisation of waste containing heavy metals such as cadmium, chromium, barium salts, zinc, copper, calcium, iron, nickel, arsenic, incinerating plants. Solidification of particularly hazardous waste containing heavy metals involves the use of of polymer sulphur to create sulphides “ • Very low water absorption. and recovery of hazardous industrial waste for commercial use manganese, lead, aluminium, magnesium, salts of other metals and ash from According to the EU Directive on the landfill of waste, which entered into force in 1999, you cannot put liquid waste in landfills. European experts are currently working on detailed rules for the storage of mercury in liquid form. • Resistance to aggressive media including acids, salts, sea water, as well as integrity and frost resistance. of these metals, which are insoluble in water. Contact details: Marcin Hiltawski Mailing address: 44-100 Gliwice, 9 Towarowa St. (production plant) Company address: 43-346 Bielsko Biała, 28 Chochołowska St. Mobile phone: +48 32 338 19 41 e-mail: [email protected] www.marbetwil.pl [Environment for Europeans, No. 34 2009] 25 NEON WOJCIECH NORBERCIAK An inexpensive source of energy, which allows heating of single-family houses or recreational and tourist facilities, is within our reach. • High efficiency of the meander heat exchanger with the Sunselect coating with an absorption coefficient of a> 95%. • 4-mm-thick solar glass with high permeability, resistant to hail. Thanks to solar energy, we can become independent from electricity price increases, heat our facilities effectively, and most importantly - retain a clean environment and fuel resources for future generations. We present an energy-efficient heating system - neosol 250 solar panel. • The neoglas diffusion membrane protects the insulation against moisture. Neosol 250 solar panel is the main product of Neon. It is the most The Temple of Divine Providence, currently being erected in Warsaw, technologically advanced structure with the highest technical and functional has been equipped by neon with a modern heating system. The heating parameters. It stands out from hundreds of other products due to its meander and power system has been designed to meet the heat and energy demand. • Lifetime of more than 25 years, with no drop in performance over the entire period of operation. exchanger design, which ensures higher performance in comparison with Sunny days for your wallet the competition. The design is characterised by a long flow route of 28-30 m. Highly efficient neosol 250 solar panels have been used in the solar High speed causes that the flow becomes turbulent, i.e. has increased heat system for conversion of solar energy into heat. They have a meander structure transfer capability. Neosol 250 solar panel with a meander exchanger and Sunselect coating with the radiation absorption coefficient of α> 95% structure is characterised by minimal sedimentation and aeration zone, as well and the transmission ratio of ε<5%. A complete Neosol solar system consists as the ability of self-deaeration. Thus the device has the best operating of 36 solar panels and has been mounted on the roof of the diocesan parish parameters of all solar panels. It is also distinguished by excellent results building on a supporting structure. of the efficiency test carried out by an independent and accredited research institute, and a complete quality test confirms the highest quality of the device (e.g. stagnation temperature is 250°C). The complement “ Collectors are ideal for maintaining a positive winter temperature in buildings unused at this time of year or in those buildings where we spend a small part of the year, which are primarily cottages and cabins. A household solar collector can reduce heating bills for washing water heating by 60-70 percent. [Dziennik Gazeta Prawna, 13.03.2010] of the key product is the entire neosol solar system - one of the best and “ We must not forget that there still are two billion inhabitants of our planet who have no access to electricity, and for many developing countries the sun is the only source of useful energy. most efficient solar systems on the market. Neosol solar system is a complete Contact details: solution which includes, inter alia, mounting kits for flat and inclined Jacek Płoszaj Kolonia Borek, 3 Przemysłowa St. 42-262 Poczesna Direct phone: +48 34 324-51-61 Mobile phone: +48 609 661-833 e-mail: [email protected] www.neon.new.pl roofs with any roofing type, as well as compensating collector connectors, connecting and venting sets, roof flashings and Neounit pump and control groups. [Ecoeurope.eu] 27 Petroster Anyone who deals with the storage of liquid fuels, knows the risks and potential losses arising from operation of tanks. Losses can be reduced to a minimum, while ensuring safe use of the installation. The solution is air-tight sealing and protective devices, and a measuring and control system offered by Petroster Sp. j., which provides two-way system protection and its individual components can be mounted in any position. • All elements have attestation and certificates required in Poland and the EU. • The offered technology allows the reduction of losses resulting from a lack of air-tight sealing of fuel systems. The result: greater security for us and the environment around us. Secure Tank Package is a system for reducing emission of liquid fuel vapours. Eco-control of fuel tanks It provides the necessary basis for the adjustment of tanks to comply with the legislation included in the regulation on the technical conditions on petrol stations and fuel depots. The package includes: an original measuring and control system, anti-overfill valve, breathing valve and a flame and explosion arrester. The structure of the valves and arresters is an original element the patented technology. Petroster received from the Polish Patent Office utility model protection “ In 1996, the government, and in fact the Minister of Industry and Trade, ordered that all newly installed fuel tanks in Poland meet Western standards. “ certificates for the respiratory and anti-overfill valves. Contact details: Andrzej Koźbiał 30-220 Kraków, 2 Leśmiana St. Mobile phone +48 509 101 321 e-mail: [email protected] Paweł Majewski 30-220 Kraków, 2 Leśmiana St. Mobile phone +48 509 101 357 e-mail: [email protected] www.petroster.com.pl And how does the fuel get to the ground from the fuel tanks? In fact, there are only three possibilities: spillage during tank clogging, excessive filling (shedding) of the tank and leakage of the tank shell. [Gazeta.pl Gospodarka, Krystyna Naszkowska, 2001] [Protection of Reservoirs, Wojciech Sokolski] 29 PP-EKO LTD Crystal clear water No discharge, no waste, no problems with clean water in the electroplating industry, applied to aviation components. That one sentence can describe ROVAPO technology, which allows the production of very pure process water. ROVAPO is a closedwater circuit technology, which minimises the amount of energy consumed and waste generated. This technology is as clean as the water that we obtain through it. ROVAPO is also characterised by a high value of the water re-use index (more than 95%). • This technology allows for the recovery of wastewater with the efficiency above 98% (including the recovery of high-quality water from sewage susceptible to biological treatment). ROVAPO is an in-house developed solution of PP-EKO. This is a family In 2006 PP-EKO Sp. z o.o. based on an in-house concept and own designs of systems of a “zero-discharge” type permitting the full recovery of water from implemented a “turnkey” undertaking for WSK PZL “Świdnik” - this was sewage. Depending on the industry, the ROVAPO system allows to obtain: the first modern wastewater treatment plant created on such scale in Poland, a. water with conductivity of <10 ms (demineralised water) e.g. used in galvanic with a closedwater circulation from a new electroplating plant. processes; • It is based on in-house developed software ensuring an automatic plant operation, regardless of the variable quantity and composition of wastewater from the production process, and guaranteeing its constant efficiency. • It allows minimization of the amount of solid waste the only waste is sludge from chemical treatment and salt concentrate containing approximately 50% of dry matter. Instead of electroplating wastewater discharged in the classical treatment b. super clean deionized water, process to the municipal sewerage system (which results in the lack c. of ability to meet certain parameters required by water supply companies), water with parameters that make it possible to re-use it in production processes. Our technology is a result of a specific knowledge of the whole team and is confirmed by a number of patents for galvanic applications. It comprises a series of treatment steps allowing achievement of the targeted there is high-quality demineralized water created from sewage, having strictly guaranteed parameters. It is returned to production processes in modern electroplating plant manufacturing aviation components. objective: selection of streams and chemical treatment, membrane systems and evaporation systems. “ According to the WHO, in the period 1985-1995 so much waste (dust, sewage, garbage) was discarded into the environment as in the previous 70 years, and nothing promises any changes. The ROVAPO technology has been designed for galvanic sewage. In some cases, it may be enhanced with other components allowing it to be used for sewage other than galvanic - pre-treated chemically and biologically activated sludge with ultra-filtration membranes (MBR AeroMem(TM) reactors). Contact details: Wojciech Pietraszek Managing Partner (CEO) 03-680 Warszawa, 12 Agatowa St. Direct phone: +48 22 519 60 32 Mobile phone: +48 602 704 632 e-mail: [email protected] www.ppeko.com.pl [Gazeta Częstochowska - Łukasz Sośniak] 31 Promar Let us take optimum care of rational use of energy utilities in the buildings we manage. This is the way to ensure real savings and clean environment. Thanks to the PROMAR technology, you can remotely, via the Internet, manage consumption of heat, electricity, water or gas located in any buildings. To operate the PROM@R MONITORING SYSTEM you just need a web browser and Internet access. What’s more, the technology is compatible with devices from different manufacturers, and its implementation provides security of operation and reduction of energy consumption costs. Manage energy in the building via the Internet “ In Poland, a significant potential for energy savings, and thus climate protection, is also associated with the effective management of energy in buildings. According to the Ecofys report - they now consume up to 40% of the total energy consumed in the country, of which 70% is used for heating purposes. Meanwhile, improvement in the thermal efficiency of buildings can result in a lower national energy consumption by over 10%. [Budżet.pl] “ Buildings are the most energy-consuming facilities in Poland. They consume about 70% of resources. Most of this energy goes into heating. It is estimated that improving the thermal efficiency will lower energy consumption in the country by 10%. The solution concerns a comprehensive service based on an in-house developed solution. PROMAR combines experience, unique knowledge and information technology in the field of managing energy utilities. This heat, electricity, gas or water is supplied by independent providers to all types of residential buildings, public buildings, industrial halls, warehouses, etc. The solution includes a system and Prom@r Monitoring Controller – specialized equipment with a dual role. It is both a device to control various actuators and at the same time controlling and measuring equipment for all typesof sensors, meters measuring temperature, flow and other parameters related to control devices. It transmits and receives data needed to analyse the behaviour of buildings and premises and to control actuators using GSM technology and the Internet. • The systems has adequate functionalities for, inter alia, independent control of the facility and additional notification and reporting functions in case of failure. • All data on each monitored facility are stored in a central database, and then made available through a web browser in the form of relevant reports. • We offer comprehensive monitoring, operation and maintenance services. Contact details: Bartosz Marciniak 85-079 Bydgoszcz, 27 Kościuszki St. mobile phone +48 660 793 827 e-mail: [email protected] Paweł Chełczyński 85-079 Bydgoszcz, 27 Kościuszki St. mobile phone +48 660 773 831 e-mail: [email protected] www.promar.com.pl [CzyWiesz.pl] 33 SUNEX LTD Solar energy in a refined frame “ “ It was calculated that a solar power plant with 10% efficiency occupying one third of the Sahara would satisfy the energy needs of the world. A square with side length of 70 km would be sufficient for Poland. On June 17, 2010, the Board of the National Fund for Environmental Protection and Water Management (NFOŚiGW) signed agreements with six banks, triggering the programme of surcharges to bank loans for the purchase and installation of solar collectors. NFOŚiGW proposed a 45% surcharge through banks to individuals and housing communities not connected to district heating, for the purchase and installation of solar collectors for heating water. [Ekologika, 2010] [The National Fund for Environmental Protection and Water Management, 2010] The use of clean energy does not necessarily involve sacrifices. A solar collector, which reduces energy costs related to heating and hot water, can also become an ornament of a house, a multi-family building or a public facility. SUNEX are advanced solar panels, which unlike many other European collectors are made from high quality stainless steel. This feature, combined with a well-thought-out design, ensures very high quality, aesthetic qualities and durability. • The flexibility of the production technology allows production of the device according to individual needs and requirements of the customer. A flat collector with a stainless steel frame is an innovative solution However, material solution is not everything. To obtain a final product on a global scale. As you know, solar panels are devices that are designed not only with excellent mechanical parameters, but also with performance to operate for decades, and therefore the application of the sustainable and exposure properties, we need a modern and unprecedented production housing is a strategic issue. For many years, SUNEX has been one technology. SUNEX developed and implemented such technology. • The product has excellent resistance parameters. • The flat solar panel is resistant to even the most aggressive and humid environment. of the European leaders in developing trends in the solar technology market - both in terms of innovative material and design solutions, as well The solar panel is manufactured in four different dimensions, i.e. 2.0 – 2.38 – as production lines for manufacturing of all elements of the solar system: 2.51 – 2.85 m2, in horizontal or vertical versions, with an absorber in the form solar panels, trays, solar power stations, heat storage media, mounting of meanders or a single or double harp section. and connection kits, etc. The company’s long-standing experience has revealed that the most lasting Contact details: solution for frame construction is stainless steel, and not the commonly used Katarzyna Glenc 47-400 Racibórz, 7 Piaskowa St. Mobile phone: +48 664 045 200 e-mail: [email protected] www.sunex.pl aluminium. 35 Watt LTD More energy and no bills for gas, heating oil and electricity. This message brightens up each day for all investors and owners of single-family houses who use WATT 4000S/SU solar panels. This product in many ways surpasses the alternative solutions: wind power stations, heat pumps and photovoltaic panels. It costs far less, allows considerable savings in the short term, does not require an installation permit and is highly effective. The solar panel is provided with an anti-reflective CENTRROSOLAR glass, reducing light reflections from the glass surface to a minimum, while more UV rays reach the absorber. Luminous heating method • Very high performance coefficient (ETA 0 = 0.845). • A unique, patented system for connecting flow pipes with the absorber, allowing faster and better exchange of heat. • The anti-glare CENTRROSOLAR glass reduces light reflections from the glass surface to a minimum, while more UV rays reach the absorber, which increases its efficiency. • Larger contact surface of the absorber with the flow tubes results in a higher exchange area. • The box made of a single aluminium element is extremely robust, durable and resistant to moisture. Watt 4000 flat solar collector is available in two solutions, as the S and SU One of the most important systems developed using WATT 4000 S has been models, which differ in the number of connection ports. Watt 4000 S has four the installation of 320 solar panels on the roofs of the Independent Public connection sockets, which allows you to connect more panels in large-size Health Care Centres in Wlodawa. installations. Watt 4000 SU with two connecting pieces is used for smaller installations. The solar panel is produced entirely by Watt. Connecting tubes, “ Scientists estimate that if every house in Europe had one collector, the amount of carbon dioxide produced by 20 million cars would not go into the atmosphere. In Poland in the years 1958-1960 at the Institute of Mechanization and Electrification of Agriculture, currently the Institute for Construction, Mechanization and Electrification of Agriculture in Warsaw, the first attempts at building solar collectors for air heating were made. It was there that in 1963 the first solar collector in Poland and one of the first ones in Europe with the surface area of 40 m2 for air heating in a green fodder and hemp straw dryer was built. [Marek Wielgo, Wyborcza.biz, 16.06.2010 r.] [Junkers Energia Odnawialna, 2007] “ through which the heating agent with the absorber flow, are a patented element of the technology. The absorber plate is properly profiled we emboss a special groove for the tube for the heating agent, which increases Contact details: the contact surface of the absorber plate with the tube. Moreover, the method Jacek Paluch Export Manager 41-940 Piekary Śląskie, 45 Podmiejska St. Tel: +48 32 287 66 82 e-mail: [email protected] www.watt.pl does not damage the selective absorber coating and does not deteriorate its properties. The combination results in a more efficient transmission of heat to the heating agent, which is confirmed in the very good collector tests results. 37 WOFIL Robert Muszański Clean water for the food industry, pools or water supply systems can be obtained without the use of chemicals. The ozonation technology allows for water purification in closed systems in a simple, effective and safe way for the environment. But that’s not all. Wofil installations are fully computerised and monitored via the Internet. Therefore they can be installed anywhere in the world and ensure comfort and prompt service support. • There is no need to hire highly qualified technical staff to operate the plant. • It minimises the risk of interruptions in the production process and lowers its operating costs. • As a result of work of one or more ozone generator blocks, it is possible to adjust its performance to the current needs and reduce the rate of its wear and tear. • The assembly of the WOFIL plant or upgrading of the existing water treatment plant requires a small area. • All of our components, elements and devices have relevant permits, approvals and certificates. Technology at clean water sources WOFIL Robert Muszański offers eco-friendly water treatment systems Wofil Robert Muszański carried out upgrading works in Przedsiębiorstwo in the ozonation technology, without the need to use artificial chemicals such Wodociągów i Kanalizacji Okręgu Częstochowskiego (Water Supply as chlorine, potassium permanganate, coagulants. and Sewage Company of the Częstochowa Region). The contract included replacement of old ozone generators with high-tech block ozonizers, The technology is completely safe, environmentally friendly, based only designed and manufactured by Wofil. The upgrading works also comprised on natural processes occurring in nature. The only difference from nature, the implementation of on-line monitoring and visualization of water treat- is that the ozonation processes are much faster and can be fully controlled. ment plant’s operations. The water ozonation system of WOFIL applied in this company is an advanced water treatment plant which uses only electricity WOFIL plants are fully computerized and can be monitored via the Internet, in the whole process. as a result of which it is possible to install them anywhere in the world “ Ozone, ensuring 100% bacteriological efficiency, secured a leading position among all disinfectants. For this reason, cities in the U.S. are rapidly installing ozonation systems to protect drinking water from contamination by Cryptosporidium. Also, more and more Polish water systems use the ozonation technology to ensure the bacteriological safety of the water consumed. [Wofil] “ In 2050, up to 7 billion people in 60 countries may suffer from scarcity of drinking water. The reason for this phenomenon is, among others, the global warming. WWF report’s authors predict that the increase in average temperature of only 4° Celsius could lead to the disappearance of all glaciers (representing 70% of drinking water supplies). while ensuring the full and prompt support. By applying the separation of technological processes in the plant into various modules, the manufacturer guarantees increased reliability and continuous operation during maintenance and repair works. Multi-block ozone generators applied in this solution allow for alternate work of particular blocks and a possibility of their extension. Contact details: Aneta Klimek 33-380 Krynica Zdrój, 10/1 Rzeźniana St. Direct phone: +48 18 414 00 67 e-mail: [email protected] www.wofil.pl [The Polish Humanitarian Organization, 2010] 39 Ministry of the Environment Republic of Poland 52/54 Wawelska St. 00-922 Warsaw Phone: +48 (22) 369 28 55 +48 (22) 369 28 66 +48 (22) 369 28 61 Fax: +48 (22) 369 22 63 e-mail: [email protected] www.mos.gov.pl Financed by National Fund for Environmental Protection and Water Management design: Datasky creative solutions printed on ecological paper During the 14th UN Conference for changes in climate which took place in Poland in 2008, the Ministry of the Environment prepared the Greenevo project - an accelerator of green technologies. It corresponds with the idea of the Poznan strategy for the transfer of technologies, adopted at the end of the summit. The strategy is to increase the effectiveness of technology transfer through proper recognition of the needs in countries developing in this respect. Through the implementation of the project, the Ministry of the Environment puts into practice the resolutions conveyed in the most important environmental document, the ecological strategy of the country concerning the transfer of technologies and pro-environmental actions. www.greenevo.gov.pl Copywrite by Ministry of the Environment ISBN 83-86564-44-X