Big Brand Tools Insurance Claim Online Auction THIS IS AN

Transcription

Sunday 1st February 2015
10am Big Brand Tools Insurance Claim Online Auction
Lots 1A – 366
Inspection Sat 9am – 12 noon
2pm Super Sunday Online Auction
Lots 2002 – 2459
Inspection: Sat & Sun 8am – 2pm
Catalogue
2pm Appliances, Electronics, Sporting
& Leisure Online Auction
Lots 1001 – 1323
Inspection: Sun 9am – 12noon
6pm Trustee, Pawnbrokers, Jewellery & Collectables
Online Auction
Lots 1501-
1742
Inspection Sun 9am – 12 noon
Monday 2nd February 2015
2pm Hardware & Tool Online Auction
Lots 2 –134 Inspection: Sat & Sun 8am – 2pm
6pm Phone Shop Closure Online Auction
Lots 2-193
Inspection Sun 9am – 12 noon
12.5% buyers premium on all items unless otherwise specified.
15% Buyers Premium applies to all alcohol.
Auction Enquiries: (07) 5559 1999
www.lloydsonline.com.au
GST Note: GST is included in the final bid price of items.
GST is included in the buyer’s premium.
Please inspect all items thoroughly.
All items as sold ‘as is’.
No refunds.
No warranty applies unless stated.
1
*** All buyers must satisfy themselves by inspection,
the catalogue provided is to be used as A GUIDE ONLY***
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
BIDDER'S TERMS AND CONDITIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Subject to any reserve price, the highest bidder shall be the Purchaser and in the event of any dispute arising, the lot may be
reoffered. The Auctioneer shall be the sole arbitrator and his decision shall be final in all matters relating to the Auction.
Any advances in bidding shall be regulated by the Auctioneer unless otherwise advised. No bidder may retract their bid once it
has been taken. The Auctioneer expressly reserves the right to bid on behalf of the Vendor.
The Auctioneer may refuse any bid if he deems it is not in the best interests of the Vendor, and may exclude any person or
persons whatsoever from the Auction at any time for any reason whatsoever.
The Vendor reserves the right to withdraw any lots from the sale at any time before the lot is offered for sale.
On the fall of the hammer, the Purchaser shall, if required, give their particulars and immediately pay $500.00 (or nominated
amount) being part payment for the lot so purchased. The Purchaser shall complete the “Terms of Auction Sale” as set out in
the Company’s written policy. In default of these conditions the Auctioneer reserves the right to immediately resell such lots as
he deems fit.
The Purchaser shall be deemed to be the principal unless, prior to the sale, they had given to the Auctioneer a copy of written
authority to bid for or on the behalf of another person or party.
On the fall of the hammer, the Purchaser shall be responsible for guarding and securing any lots. The Auctioneer accepts no
responsibility after the fall of the hammer for safeguarding of any lots. Ownership and title shall not pass to the Purchaser until
all lots are paid for in full. Lots will not be available for removal upon part payment.
All lots have been available for inspection to the purchaser at a specified time. No allowances, refunds or warranties are offered
with any lot whatsoever whether express or implied.
Any statements as to the quantity of goods are approximate only and are as represented to the Company. The Company gives
no warranty that quantities as stated are correct. Whilst every care has been taken in the compilation of reports all catalogues,
advertisements or oral descriptions may contain errors and as such are to be used as guide only. Should quantities in any lot
fall short any dispute as to compensation shall be settled by an arbitrator who shall be a person mutually agreed upon by both
parties.
All lots purchased must be paid for on day after auction by close of business (Usually 4.30pm). No purchases may be
removed from gated or secured areas until goods have been paid for and a pink slip has been obtained from reception. All
purchases must be removed by 12pm Tuesday following the sale or as specified.
The Auctioneer reserves the right to resell any abandoned items without being obliged to give any notice of resale to the
Purchaser.
Upon the Purchaser failing to settle any lots purchased they hereby agree to pay any commission which the Company may have
lost on a purchase as the result of the Purchaser not proceeding including the buyers premium at the rate stated in the
advertised sale and costs associated in any resale or attempted resale, including advertising, security, storage and transport.
Interest on the purchase of moneys outstanding from time to time on and from the third day after the date of the sale at the
corporate overdraft reference rate for the time being charged by the Commonwealth Banking Corporation.
No servant or agent of the Company is authorised to waive, add to or vary these conditions without written authority of the
Company’s Manager.
The Purchaser agrees that the Company will charge a premium as stated in the advertisements and catalogues of 12.5%
(Alcohol 15%) (GST INC) of the gross purchase price. The Buyer’s Premium is payable in addition to the knockdown price for
services provided to the Purchaser by the company.
Unless otherwise stated the Company advises the Purchaser that all lots purchased are GST inclusive.
The Purchaser agrees that the Company is acting as the authorised agent of the Vendor and any rights of the action he may
have in respect of the lots purchases by him lie against the Vendor, not the Company. In the event that he wishes to take
proceedings in respect of the said lots and the Vendor has not been named by the Company in its dealings with him to date, he
agrees to request the name of the Vendor from the Company, and, provided the Company provides the relevant details to
proceed against the Vendor, not the Company.
The Purchaser acknowledges that any software included in sales of computer equipment may be under licence to the Vendor
and that the terms and conditions of the License may restrict the use and transfer of the software. The Purchaser acknowledges
that the company does not offer title to such software and it may or may not remain the property of the Vendor.
The Occupational Health & Safety Act (1995) and the subsequent Regulations (1997) impose obligations in respect of safety for
workers arising out of design, manufacture and supply of Plant & Equipment for use in the workplace.
Lloyds Auctioneers & Valuers (Lloyds) warns buyers that all plant & equipment offered for sale at Auction may not be fit for use
in any workplace and that the buyer is responsible to ensure compliance with all necessary requirements under the Act and
Regulations and that the plant and equipment is fit for its intended use in the workplace prior to being used for its intended
purpose. Plant MUST be given a safety inspection prior to operation when its purchased at auction. (Please refer to our
Electrical Safety Guide in our catalogue for more information)
2
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
3
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
4
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
5
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
6
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
Key Codes:
(SH)
(S)
Second Hand
Seconds
Big Brand Tools Insurance Claim Online Auction
THIS IS AN ONLINE AUCTION ONLY
STARTS ONLINE AT 10AM
All pick-ups to be complete by 12pm Tuesday – No Exceptions!!!
1a
Job Site Radio 18v by Makita Features: Mp3 compatibility / iPod 2 speaker stereo system
Max.output power - 3.5W x2 (using 18v battery) Diameter - 76mm (8 ohm) x 2 Bumpers and metal
pipes protect against rough handling Dual power sources - AC or Makita batteries Digital quartz
display Inspection recommended, as is (this item is subject of an insurance claim) (sold per each)
RRP $125
2
Rotary Hammer PLH 32 XE by Milwaukee Specifications: Power input 900 W Drilling dia. in
concrete / wood / steel 32 / 40 / 16 mm Drilling diameter with core cutter 82 mm Drilling speed
(full-load) 0 - 800 rpm Tool reception FIXTEC/ SDS-plus Weight 3.6 kg Blow energy 3.8 J
Inspection recommended, as is (this item is subject of an insurance claim) RRP $799
3
Rotary Hammer PLH 32 XE by Milwaukee Specifications: Power input 900 W Drilling dia. in
concrete / wood / steel 32 / 40 / 16 mm Drilling diameter with core cutter 82 mm Drilling speed
(full-load) 0 - 800 rpm Tool reception FIXTEC/ SDS-plus Weight 3.6 kg Blow energy 3.8 J
4
Impact Wrench C12 IWR-22C by Milwaukee Features: Milwaukee high performance compact
impact wrench measuring 165mm in length makes it ideal for working within confined spaces
Heavy Duty full metal gearbox and gears for superior durability and maximum torque Impact
mechanism increases driving speed to a category leading 2200 RPM with 136Nm of torque
Delivers 3000 IPM for increased productivity 3/8? anvil w/friction ring retention For use on 3 / 8–
9mm bolts or smaller Slimline soft grip handle Built in LED light illuminates the work surface
Specifications: Voltage - 12V/1.5Ah No load speed - 0–2200 RPM Impact rate - 0–3000 IPM Anvil
- 3/8? SD Max. torque - 136Nm Weight - 1.1kg Inspection recommended, as is (this item is subject
of an insurance claim) RRP $259
7
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
5
Rotary Hammer Drill PFH 26 by Milwaukee Features: Most compact, slimline fixing hammer
available in its class Unmatched performance with 2.4 J blow energy and 4500 bpm Lowest
vibration only 13.5 m/s² Extreme Milwaukee durability thanks to Integrated metal block technology
Innovative and patented weight reduction technology inside HAMMER-STOP FUNCTION - Turns
off the hammering action - For screwdriving applications or drilling without percussion in
wood/metal Safety clutch – automatically stops rotating to protect user and drill in case of drill bit
jam. Specifications: Power input 725 W Full-load hammer action 0-4500 bpm Impact energy per
stroke according to EPTA-Procedure 05/2009 2.4 J Weight according EPTA-Procedure 01/2003
2.4 kg Inspection recommended, as is (this item is subject of an insurance claim) RRP $199
6
Rotary Hammer Drill PFH 26 by Milwaukee Features: Most compact, slimline fixing hammer
available in its class Unmatched performance with 2.4 J blow energy and 4500 bpm Lowest
vibration only 13.5 m/s² Extreme Milwaukee durability thanks to Integrated metal block technology
Innovative and patented weight reduction technology inside HAMMER-STOP FUNCTION - Turns
off the hammering action - For screwdriving applications or drilling without percussion in
wood/metal Safety clutch – automatically stops rotating to protect user and drill in case of drill bit
jam. Specifications: Power input 725 W Full-load hammer action 0-4500 bpm Impact energy per
stroke according to EPTA-Procedure 05/2009 2.4 J Weight according EPTA-Procedure 01/2003
7
Halogen Worklight WLTRIPOD by Detroit 2x 500W Weather Resisitant IP44 Rating Strong tubular
frame Dimensions: 1800mm x 840mm Inspection recommended, as is (this item is subject of an
insurance claim) RRP $84
8
Dust Extractor AS300ELCP by Milwaukee Includes: 4M Anti-Static Suction Hose 2x Extension
Tubes 1x Fleece Bag 1x Disposable Bag Features: Easy clean filter cleaning Semi-compact 30
litre tank for site / workshop use 3700 litres / min airflow with 250 mbar suction Power take-off with
auto switching for power tools Easy clean PET filter Super silent turbine for low noise Anti-static
package to prevent shocks caused by static charges Dust class L. Standard MAK factor > 1
mg/m3 On-board power tool socket with auto on/off and 5sec stop delay to extract residual dust
particles Soft start and speed regulation in both vacuum and dust extraction mode Specifications:
Air volume 3.700 l/min Vacuum 250 mbar Max. rated power 1.500 Watt weight 10 kg Container
capacity 30 Inspection recommended, as is (this item is subject of an insurance claim) RRP $499
9
Dust Extractor AS300ELCP by Milwaukee Includes: 4M Anti-Static Suction Hose 2x Extension
Tubes 1x Fleece Bag 1x Disposable Bag Features: Easy clean filter cleaning Semi-compact 30
litre tank for site / workshop use 3700 litres / min airflow with 250 mbar suction Power take-off with
auto switching for power tools Easy clean PET filter Super silent turbine for low noise Anti-static
package to prevent shocks caused by static charges Dust class L. Standard MAK factor > 1
mg/m3 On-board power tool socket with auto on/off and 5sec stop delay to extract residual dust
particles Soft start and speed regulation in both vacuum and dust extraction mode Specifications:
Air volume 3.700 l/min Vacuum 250 mbar Max. rated power 1.500 Watt weight 10 kg Container
capacity 30 Inspection recommended, as is (this item is subject of an insurance claim) RRP $499
10
Sander orbital random 150mm, Milwaukee, inspection recommended, as is (this item is subject of
an insurance claim) RRP $99
8
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
11
Orbital Sander ROS150E-2 by Milwaukee Features : Powerful 440W Motor - Provides 4,00010,000 OPM Diecast Base Construction - For strength and durability 2-Mode Oscillation Slection
(3.2/6.4mm) - For control of material removable Soft Start & Pad Brake - For a gouge free
workpiece Dust Extraction - Collection bag or used in conjunction with extractor Electronic
Variable Speed - To suit a range of job applications Specifications : Power: : 440W No-Load
Speed : 4,000 - 10,000rpm Orbital Action : 3.2mm / 6.4mm Paper Fitment : Hook & Loop Weight :
3kg Inspection recommended, as is (this item is subject of an insurance claim) RRP $99
12
Wet/Dry Vacuum VC2510LX1 by Makita Features: Complying with dust class L Automatic self
cleaning filter Best suitable for working with power tools. Outlet on front for power tools to work
with. The machine will turn on/off automatically once the connected power tool is switch on /off.
Base hook provides large capacity of on-board storage. Wet / Dry dust collection without changing
filter. Specifications: Continuous rating input: 1,050W Max. peak air flow: 2.0m? / min Max. sealed
suction (water colum): 22.0kPa (2,240mmH2O) Tank capacity: Water: 14L Dust: 25L Dimensions
(L x W x H): 432x416x451mm Net weight: 10.5kg (23.2lbs) Power supply cord: 5.0m (16.4ft)
Includes: 1 x Vacuum Cleaner 25L VC2510LX1 2 Flexible Hoses Extension Tubes Corner Nozzle
Crevice Nozzle Brushes For Floors Brushes For Liquids 1 year Australia Makita Warranty
13
Dust Extractor by Cleantex Features: 99.95 separation efficiency at .03 microns Antistatic function
prevents static build-up during use Constantly high suction because of the compact high
performance turbine Attachment of Systainers via Sys-Dock Hose garage and cable windup for
greater tidiness and safety Economical because of the optimal use of the available volume with a
SELFCLEAN filter bag in the container Specifications: Power consumption 350-1200 W Airflow
max. 3900 l/min Max. vacuum 24000 Pa Filter surface area 6318 cm² Rubber-insulated mains
cable 7,5 m Container/Filter bag capacity 26/24 l Dimension (L x W x H) 630 x 365 x 540 mm
Maximum wattage of connected tool 2400 W Weight 13,9 kg Inspection recommended, as is (this
item is subject of an insurance claim)
14
3 Piece Combination Pack KC18DGDL(HJ) by Hitachi Kit Contents: DV18DSDL – Impact
(hammer) driver drill WR18DSDL – Impact wrench G18DSL – 125mm Angle grinder 2 x BSL1850
– 5.0Ah batteries UC18YRSL – 14.4V – 18V cooling charger Site Bag Inspection recommended,
as is (this item is subject of an insurance claim)
15
Wet/Dry Vacuum YLW95 by Detroit Features: Stainless Steel Cannister Hepa Filter Water
Protected Power Switch Multi Directional Castor Wheels Blower Function Onboard Accessory
Storage Telescopic Wand 240V Power Outlet Inspection recommended, as is (this item is subject
of an insurance claim)
16
Tucker Box Cooler & Flask by Total Tools Inspection recommended, as is (this item is subject of
an insurance claim) RRP $19.99
Vehicle Jack by Total Tools Product Features: 680KG 30CM Rollers inspection recommended, as
is (this item is subject of an insurance claim) RRP $119.99
17
9
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
18
Cut-off Saw CC14SF by Hitachi Features: Powerful 2,400W motor for heavy duty applications One
touch vice system allows quick feeding and easy tightening and cutting Spindle lock makes
mounding and dismounting wheels more convenient Sturdy aluminium housing for extended
service life Spark diversion guard for user safety Soft grip handle for added user comfort
Externally accessible carbon brushes for easy service and maintenance Cuts left and right at 45°
Genuine Hitachi accessories available Includes 6 x Hitachi cut off wheels Specifications: Capacity:
Bar diameter: 65mm at 90° / Pipe diameter: 120mm at 90° Pipe diameter: 120mm at 90° /
Rectangular Shaped steel: 130 x 115mm, 235 x 70mm and 195 x 100mm Input Power: 2,400W
No Load Speed: 3,800 (min-1) Blade Diameter: 355mm Weight: 16.5kg Length: 318 x 603 X
603mm Standard Accessories: 8mm hex key and 6 cut off wheels Inspection recommended, as is
(this item is subject of an insurance claim) RRP $335
19
Cordless Slide Planer P18DSL by Hitachi Features: 82mm cutting width for increased work
efficiency Powerful cutting with a max cutting depth of 2.0mmand 9mm rebating depth Heavy duty
aluminum end bracket for increased strength and endurance Rear stand for added user safety
and protection of blades Optional dust adapter enables optional elbow and dust bag attachment to
be fitted for increased safety Remaining battery indicator allows the user to read the amount of
charge within the battery Exceptional ergonomics with a slim grip angled handle for increased
user comfort Specifications: Voltage: 18V Battery type: Slide Cutting Width: 82mm Max. Cutting
Depth: 2.0mm Max. Rebating Depth: 9.0mm No Load speed: 16,000 Dimensions (L X W X H):
332mm x 166mm x 160mm Weight: 3.3kg Inspection recommended, as is (this item is subject of
an insurance claim) RRP $598.00
20
Work Vice by Detroit Ideal for working on small work pieces Size: 545 x 200 x 180mm Suts Detroit
Tool Stand UWCST1570 Inspection recommended, as is (this item is subject of an insurance
claim)
21
Industrial Floor Fan by Detroit Rated Power 180W Rated Voltage 220-240V - 50Hz Airflow
142M³/Min 3 Speed Settings 3 High Velocity Blades Stand With Adjustable Tilt Brushless Long
Life Motor Diameter 500mm Height 600mm Inspection recommended, as is (this item is subject of
an insurance claim)
22
Wet/Dry Vacuum by Detroit Features: HEPA filter Water protected power switch Multi-directional
castor wheels Blower function Telescopic wand 1.8m flexible hose Onboard accessory storage
Rated power input: 1200W Rated voltage: 220-240V~50Hz Inspection recommended, as is (this
item is subject of an insurance claim) RRP $561.00
23
Cut-off Saw CC14SF by Hitachi Features: Powerful 2,400W motor for heavy duty applications One
touch vice system allows quick feeding and easy tightening and cutting Spindle lock makes
mounding and dismounting wheels more convenient Sturdy aluminium housing for extended
service life Spark diversion guard for user safety Soft grip handle for added user comfort
Externally accessible carbon brushes for easy service and maintenance Cuts left and right at 45°
Genuine Hitachi accessories available Includes 6 x Hitachi cut off wheels Specifications: Capacity:
Bar diameter: 65mm at 90° / Pipe diameter: 120mm at 90° Pipe diameter: 120mm at 90° /
Rectangular Shaped steel: 130 x 115mm, 235 x 70mm and 195 x 100mm Input Power: 2,400W
No Load Speed: 3,800 (min-1) Blade Diameter: 355mm Weight: 16.5kg Length: 318 x 603 X
603mm Standard Accessories: 8mm hex key and 6 cut off wheels Inspection recommended, as is
10
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
24
Cordless Slide Compound Mitre Saw by Milwaukee Includes: M18SMS216-0 (tool only) 1 x 48T
Circular Saw Blade Batteries and charger sold separately Features: Milwaukee® 2-pole frameless
motor delivers 2700 rpm for fast cutting Heavy duty case base and fence ensures durability and
acuracy REDLINK™ overload protection electronics delivers system durability Dual vertical steel
rails with linear bearings for smooth sliding action Mitre release system for quick cutting
adjustments Steel detent plate with preset angles for accurate cutting LED light to illuminate the
work area Powered by REDLITHIUM™ battery technology Specifications: Voltage: 18V Motor
type: 2-pole frameless Speed: 2700rpm Bevel Capacity: -2 to 48° Blade/Bore Size: 216mm /
30mm Arbor size: 16mm Max cut capacity 90°: 270 x 60mm Max cut capacity 45°: 190 x 48mm
Weight (skin only): 13.9kg Inspection recommended, as is (this item is subject of an insurance
claim) RRP $599.00
25
Industrial Pedestal Fan by Detroit 290 m3 / minute airflow Fixed or 90degrees oscillating head 3
speed settings Inspection recommended, as is (this item is subject of an insurance claim) RRP
$185.50
26
Industrial Pedestal Fan by Detroit 290 m3 / minute airflow Fixed or 90degrees oscillating head 3
$185.50
27
28
29
Torch and Stand by Detroit 1w Torch with integrated machine mount Adjustable and portable
extension arm Handy work torch illuminates dark work areas Takes 3 x AAA 1.5v Batteries
(included) Suits Detroit Power Tool Stand UWCST1570 Inspection recommended, as is (this item
is subject of an insurance claim)
30
Angle Grinder GWS by Bosch Features: Constant Electronic for constant speed, also under heavy
load Overload protection, smooth start and starting current limitation Good handling thanks to slim
housing Gear head can be rotated in 90° steps Handle can be used on right or left Anti-rotation
protective guard - quickly and easily adjustable, provides reliable protection Vibration control
auxiliary handle ensures your joints are protected during working Direct cooling for high overload
capability and long lifetime Specifcations: Motor : 1400 W No-load speed : 11000 rpm Grinding
spindle thread : M14 Disc diameter : 125 mm Rubber sanding plate, diameter : 125 mm Wire cup
brush, diameter : 70 mm Weight without cable : 2,2 kg Inspection recommended, as is (this item is
subject of an insurance claim) RRP $345.00
31
11
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
32
33
34
35
36
12
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
37
38
39
Angle Grinder GWS by Bosch Features: Anti-rotation protective guard – quickly and easily
adjustable, provides reliable protection Softgrip for convenient handling of the machine Armoured
coils that protect the motor against sharp grinding dust ensure long lifetime Specifications: Rated
power input 2,200 W No-load speed 6500 rpm Grinding spindle thread M 14 Main handle Shaft
Disc diameter 230 mm Weight without cable 5.3 kg Inspection recommended, as is (this item is
40
Angle Grinder GWS by Bosch Features: Anti-rotation protective guard – quickly and easily
adjustable, provides reliable protection Softgrip for convenient handling of the machine Armoured
coils that protect the motor against sharp grinding dust ensure long lifetime Specifications: Rated
power input 2,200 W No-load speed 6500 rpm Grinding spindle thread M 14 Main handle Shaft
Disc diameter 230 mm Weight without cable 5.3 kg Inspection recommended, as is (this item is
41
2 Piece Combo by Bosch Kit includes: GSB18VE-2 Destroyer GOP18V Multi-Tool 3 x 3Ah
Batteries Charger Bag Inspection recommended, as is (this item is subject of an insurance claim)
RRP $400.00
42
Mobile 3 Piece Combo Kit LXT321 by Makita Features: Mobile Hammer Drill Impact Driver
Circular Saw Duffel Carry Bag 18V LXT LI-ION 4-PORT CHARGER Inspection recommended, as
is (this item is subject of an insurance claim) RRP $1,088.00
43
2 Piece Combo by Bosch Kit includes: GSB18VE-2 Destroyer GOP18V Multi-Tool 3 x 3Ah
Batteries Charger Bag Inspection recommended, as is (this item is subject of an insurance claim)
RRP $400.00
44
13 Piece Bi-Metal Hole Saw Kit by Milwuakee Features: Nine (9) Hole Saws: 3/4", 7/8", 1-1/8", 13/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/2" Two (2) Arbors: 49-56-7010, 49-56-7250 Two (2) Pilot Bits:
49-56-8010 (assembled with arbors) Ice Hardened™ cryogenically treated for up to 50% longer
life Optimized tooth form for up to 2X faster cutting Item Weight 4 pounds Dimensions 3.5 x 9 x 9
inches Inspection recommended, as is (this item is subject of an insurance claim) RRP $55.49
45
Bare Impact Driver DCF885N-XE by Dewalt 6.35mm (1/4"0 Bare 18V Lithium Ion Inspection
recommended, as is (this item is subject of an insurance claim) RRP $89.00
13
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
46
47
Bare Impact Driver DCF885N-XE by Dewalt 6.35mm (1/4"0 Bare 18V Lithium Ion Inspection
Plunge Saw Divar 55 by Woodstar Blade diameter: 160 mm (6-1/4) Input:1200 W Blade
Speed:5500 rpm Max Cut 90deg w/o Guide Rail:55 mm Max Cut 4deg5 w/o Guide Rail:40 mm
Bevel capacity:0 – 45deg Close to Wall Cut:15,5 mm Inspection recommended, as is (this item is
48
Plunge Saw Divar 55 by Woodstar Blade diameter: 160 mm (6-1/4) Input:1200 W Blade
Speed:5500 rpm Max Cut 90deg w/o Guide Rail:55 mm Max Cut 4deg5 w/o Guide Rail:40 mm
Bevel capacity:0 – 45deg Close to Wall Cut:15,5 mm Inspection recommended, as is (this item is
49
Jobsite Compact Radio 18V DCR019 by DeWalt Features: Compact and robust FM/AM jobsite
radio Accepts 10.8V, 14.4V and 18V XR Li-Ion batteries 3.5mm auxiliary port allows for
connection to portable audio devices Integral roll cage provides impact resistance for maximum
durability 1.8m power cord with wrap-around cord storage Memory storage for 10 FM and 5 AM
presets Inspection recommended, as is (this item is subject of an insurance claim) RRP $167.00
50
Jobsite Compact Radio 18V DCR019 by DeWalt Features: Compact and robust FM/AM jobsite
radio Accepts 10.8V, 14.4V and 18V XR Li-Ion batteries 3.5mm auxiliary port allows for
connection to portable audio devices Integral roll cage provides impact resistance for maximum
durability 1.8m power cord with wrap-around cord storage Memory storage for 10 FM and 5 AM
presets Inspection recommended, as is (this item is subject of an insurance claim) RRP $167.00
51
2pc 18V Combo kit DBX 2-Premium by Bosch This kit contains: -18V GSB Destroyer Heavy Duty
Hammer Drill BB -18V GDX Heavty Duty Impact Driver/Wrench BB -2 x 5.0ah 18V-LI Batteries AL1860 Charger -Tool Bag Features: Electronic cell protection prevents the battery from
overloading and ensures a long lifetime. Electronic Motor Protection prevnts the motor from
overheating and therefore increases the lifetime. Durashield housing on the GSB Destroyer
increases durability and protects the drill from drops of up to 2 metres. Comes with tool bag. The
GDX impact driver/wrench has both hex and square bit capabilites for muiltiple applications.
Inspection recommended, as is (this item is subject of an insurance claim) RRP $599.00
52
53
14
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
54
55
3pc 18V Combo kit DB3-XG by Bosch Kit Includes: GSB18VE - Hammerdrill Driver - Destroyer
GDX18V - Impact Driver/Wrench GWS18V - Angle Grinder 2 x 18V 4.0Ah Batteries Fast Charger
Bosch Tool Bag Features: Heavy-duty power in compact package Extremely powerful-up to 85
Nm for the toughest screw driving and drill applications Extremely robust - Fully functional even
after 2 m falling on concrete. Metal Chuck Extremely compact - shortest head length in its class
Slim and ergonomic design grip for fatigue-free job Electronic Motor Protection (EMP) protects the
motor against overload and ensures a long lifetime Bosch Electronic Cell Protection (ECP):
protects the battery against overload, overheating and total discharge LED light to illuminate dark
area Specifications: Voltage: 18V Max torque: Hard screw driving applications: 85Nm Soft screw
driving applications: 38Nm No-load speed: 1st gear: 0 - 420rpm 2nd gear: 0 - 1800rpm Max.
impact rate: 27,000bpm Chuck clamping range: 1.5 - 13mm Weight: 2.2kg Torque settings: 25+1
Max. drilling diameter: Wood: 4mm Steel: 13mm Masonry: 16mm Max. screw diameter: 10 mm
56
57
15
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
58
59
60
16
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
61
62
63
Angle Grinder AG750-125 by Milwaukee Features: Powerful 750 watt motor Suitable for 125 mm
discs Load speed of 10,000 rev. / Min. Maximum cutting depth 33 mm 4 meters cable for flexible
working in the workplace Metal gearbox for optimum stability and longevity Gear in intervals of 90
degrees rotation Flat metal gear head for a good view of the grinding and optimized cutting depth
Protected against dust vents Spindle lock Specifications Power 750 Watt Disc diameter 125 mm
Load speed 10 000 rev. / Min. Spindle diameter and thread M 14 Max. cutting depth 33 mm
weight 2.0 kg Inspection recommended, as is (this item is subject of an insurance claim) RRP
$95.00
51pc Air Tool Kit C0051 by Iron Air Features 1/2" Impact Wrench 3/8" Ratchet Wrench 150mm Air
Hammer and various attachments Inspection recommended, as is (this item is subject of an
insurance claim) RRP $29.99
64
65
66
67
18V HD 6 Piece Combo Kit DB6-XGH3 by Bosch Kit Includes: 18V Hammer Drill 18V Impact
Driver/Wrench 18V Brushless 3-mode Rotary Hammer 18V Circular Saw 18V Angle grinder 18V
Vari LED Torch 2x 4.0Ah Lithium Ion Batteries Large Tool Bag Inspection recommended, as is
17
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
68
5pc Mobile Combo Kit LTX500 by Makita Kit includes: • 1 x 18v Hammer driver drill • 1 x 18v
Impact driver • 1 x 18v 115mm Angle grinder • 1 x 18v Rotary Hammer • 1 x 18v Swivel head torch
• 2 x 18v Batteries • 1 x Charger • 1 x Tool bag Features: All metal gear construction - Extra-high
transmission durability Belt clip and bit holder Battery fuel gauge Single sleeve key less chuck
allows for easy bit installation/removal by one hand Torque setting ring - Wider torque range of 110 NM in clutch mode allows for versatile applications Note: Free Makita Radio via redemption as
per Makita Terms and Conditions Inspection recommended, as is (this item is subject of an
69
Cordless Vacuum cleaner GAS18VLI by Bosch Features: Highest dust suction performance for
high working efficiency HEPA filter for high filtering efficiency to protect user's health Longest
runtime in one charge max. 50% longer runtime than Makita Specifications: Max. vacuum: 4kPa
(18V) Max. air flow: 19.3l/s (18V) Dust capacity: 700ml Filter material: HEPA Inspection
70
Compressor cover by Iron Air 100x40x55cm Waterproof material Hook, loop straps and cord to
secure Inspection recommended, as is (this item is subject of an insurance claim) (sold per each)
RRP $49.99
71
Laminate Trimmer 3709X by Makita Features: Ideal for trimming Laminates, edging, freehand and
template design work See-through base plate for maximum visability and control Rack & pinion
fine depth adjustment Top mounted supply cord & power switch Rubberized "soft grip" for user
comfort and control Specs: Base Dimensions (mm) 82x90 Collet Capacity 6.35mm Continuous
Rating Input 530W Net Weight 1.5kg No Load Speed 30,000rpm Overall Height 199mm Power
Supply Cord 2.5m Inspection recommended, as is (this item is subject of an insurance claim) RRP
$179.00
72
$179.00
73
$179.00
74
Angle Grinder 9556NBK by Makita Features: Labyrinth structure seals around bearings and
protects motor from dust and dirt Small dia. barrel grip for easy handling High heat resistance
motor Gear housing can be rotated to suit most cutting and grinding applications Shaft lock button
for easy wheel changes Specs: Continuous Rating Input 840W Max Capacity - Abrasive disc
100mm Max Capacity - Depressed center wheel 100mm Max Capacity - Diamond wheel 100mm
Max Capacity - Wire cup brush 75mm Net weight 1.6kg No load speed 11,000rpm Overall length
271mm Power supply cord 2.5m Spindle thread M10x1.5 Inspection recommended, as is (this
18
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
75
Angle Grinder 9556NBK by Makita Features: Labyrinth structure seals around bearings and
protects motor from dust and dirt Small dia. barrel grip for easy handling High heat resistance
motor Gear housing can be rotated to suit most cutting and grinding applications Shaft lock button
for easy wheel changes Specs: Continuous Rating Input 840W Max Capacity - Abrasive disc
100mm Max Capacity - Depressed center wheel 100mm Max Capacity - Diamond wheel 100mm
Max Capacity - Wire cup brush 75mm Net weight 1.6kg No load speed 11,000rpm Overall length
271mm Power supply cord 2.5m Spindle thread M10x1.5 Inspection recommended, as is (this
76
4pce Air spray gun kit by Iron Air Contents: 2x Large (production) spray guns 1x Small (detail)
spray gun 1x Locking pressure regulator Features: High Volume & Low Pressure spray guns for
efficient material coverage Gravity feed paint pots to minimise waste 2 Stage trigger control – air
first followed by paint Air & paint volume controls Light weight aluminium paint pots Adjustable
spray width Inspection recommended, as is (this item is subject of an insurance claim) RRP
$95.00
77
18V Mobile 3 Piece Combo Kit 18v by Makita Kit includes: 18V LITHIUM-ION CORDLESS
HAMMER DRIVER DRILL 18V LXT LI-ION CORDLESS IMPACT DRIVER 18V LI-ION
CORDLESS 115MM ANGLE GRINDER 2x 3.0AH LI-ION BATTERY 18V LI-ION CORDLESS
BATTERY FAST CHARGER TWIN CASE WITH ORGANISER LID Inspection recommended, as
78
18V Mobile 3 Piece Combo Kit 18v by Makita Kit includes: 18V LITHIUM-ION CORDLESS
HAMMER DRIVER DRILL 18V LXT LI-ION CORDLESS IMPACT DRIVER 18V LI-ION
CORDLESS 115MM ANGLE GRINDER 2x 3.0AH LI-ION BATTERY 18V LI-ION CORDLESS
BATTERY FAST CHARGER TWIN CASE WITH ORGANISER LID Inspection recommended, as
79
66Pce Combo Drill Bit Set by Makita Features: Drill Bits Spade Bits Screw Bits Magnetic Bits etc
Plastic Carry Case Inspection recommended, as is (this item is subject of an insurance claim)
RRP $149.00
80
18V 6 Piece Combo Kit by Makita Kit Includes: Hammer Drill Driver (16mm Masonary Capacity)
1/4" Impact Driver (145Nm Torque) 115mm Angle Grinder 165mm Circular Saw Reciprocating
Saw Torch (4 swivel positions) 2 x 4.0Ah Li-ion Batteries Fast Charger & Carry Bag Inspection
81
66Pce Combo Drill Bit Set by Makita Features: Drill Bits Spade Bits Screw Bits Magnetic Bits etc
Plastic Carry Case Inspection recommended, as is (this item is subject of an insurance claim)
RRP $149.00
82
Welding Trolley to suit 165Mig /190Mig by Uni-Mig Welding Features: Solid Construction Heavy
Gauge Metal Solid Rear Rubber Wheels Free Moving Front Castors (Welder not included)
83
18V 6 Piece Combo Kit by Makita Kit Includes: Hammer Drill Driver (16mm Masonary Capacity)
1/4" Impact Driver (145Nm Torque) 115mm Angle Grinder 165mm Circular Saw Reciprocating
Saw Torch (4 swivel positions) 2 x 4.0Ah Li-ion Batteries Fast Charger & Carry Bag Inspection
19
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
84
85
86
Cordless M12 LITHIUM-ION Red Heated Jacket Skin by Milwaukee Size: Large (Jacket Only)
Superior Run-Time: Up to 6 hours of continuous heat per battery charge Water and Wind
Resistant 3 Heat Zones distribute heat to core body areas 3 Heat Settings Plus Warm-up Feature
Easy Touch Heat Controller Convenient Battery Holder Pocket on backside of Jacket
Specifications: Voltage 12V Heat Elements Core Zone: R Chest, L Chest, Back Heat Settings 3 +
Warm-Up Feature Gear Material Soft Shell: 95% Polyester / 5% Spandex Pockets 2 side hand
pockets + Cell Phone/MP3 chest pocket Battery Type M12™ REDLITHIUM™ Rechargeable
Charge Time 30 minutes Inspection recommended, as is (this item is subject of an insurance
claim) RRP $149.00
Cordless M12 LITHIUM-ION Red Heated Jacket Skin by Milwaukee Size: Large (Jacket Only)
Superior Run-Time: Up to 6 hours of continuous heat per battery charge Water and Wind
Resistant 3 Heat Zones distribute heat to core body areas 3 Heat Settings Plus Warm-up Feature
Easy Touch Heat Controller Convenient Battery Holder Pocket on backside of Jacket
Specifications: Voltage 12V Heat Elements Core Zone: R Chest, L Chest, Back Heat Settings 3 +
Warm-Up Feature Gear Material Soft Shell: 95% Polyester / 5% Spandex Pockets 2 side hand
pockets + Cell Phone/MP3 chest pocket Battery Type M12™ REDLITHIUM™ Rechargeable
Charge Time 30 minutes Inspection recommended, as is (this item is subject of an insurance
claim) RRP $149.00
5 Piece 18V Cordless Combo Kit DLX5001 by Makita Kit Includes: DHP458 - Hammer Drill Driver
DTD146 - Impact Driver DGA452 - 115mm Angle Grinder DHR202 - Rotary Hammer DML185 Swivel Head Torch 3 x 18V 3.0Ah Batteries Charger Kitbag Inspection recommended, as is (this
87
6pce 18V Cordless Combo Kit by Makita Kit Contains: DHP481 Brushless Hammer Drill Driver
DTD145 Brushless Impact Driver DGA504 Brushless 5" Angle Grinder DHR242 Brushless Rotary
Hammer DHS680 Brushless Circular Saw BML185 Swivel Head Torch Site Carry Bag 2 x 5.0Ah
Lithium Ion Battery Packs 1 x DC18RC Rapid Charger Inspection recommended, as is (this item is
88
Machine Mounts UWCST01 by Detroit Features: Quick attach and release Caters for all mitre
saws and bench top tools Suits Detroit power tool stand UWCST1570 Length 500mm Length of
slot 482mm Inspection recommended, as is (this item is subject of an insurance claim) RRP
$39.95
89
Angle Grinder DGA504Z by Makita Features: Easy to hold grip design with rubber for anti-skid
Worlds deepest concrete cutting mobile angle grinder at a depth of 20mm Excellent performance as powerful as AC model Gear housing can be rotated to suit most cutting and grinding
applications Automatic speed control changes the cutting speed according to load condition for an
optimum operation Removable dust cover Anti-restart function prevents accidental startup for
safety even if the machien is plugged to powersorce with the lock-on switch on Extreme protection
technology for use in outdoor applications or harsh environments, protection from dust and
dripping water is enhanced Specifications: Voltage: 18V Wheel diameter: 125mm No load speed:
8,500rpm Dimensions (L x W x H): 362mm x 140mm x 145mm Weight: 2.1kg Inspection
20
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
89A
90
91
Angle Grinder AGV15-125XE by Milwaukee SPECIFICATIONS: Power input 1.550 W Disc
diameter 125 mm No-load speed I./ II. 2.800 - 11.000 rpm Spindle diameter and thread M 14 Max.
cutting depth 31 mm weight 2.6 kg Inspection recommended, as is (this item is subject of an
92
93
94
Compact Cordless Blower M18 BBL-0 by Makita Features: 3 Speed Electronic Switch for versatile
clearing power Extension Nozzle clears dust and debris easily. Soft plastic resists crushing or
cracking Universal inflator/deflator for easy setup or take down of most inflatable products Lock on
switch reduces user fatigue Shock absorbing polymer Reinforced handle resists drops Inspection
95
Angle Grinder D28065-XE by Dewalt Features: Power Input: 1250 Watts Power Output: 680 Watts
No Load Speed: 9000 rpm Max. Disc Diameter: 125 mm Spindle Thread: M14 Weight: 2.6 kg
Length: 385 mm Height: 110 mm Inspection recommended, as is (this item is subject of an
21
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
96
Rotary Hammer GBH432DFR by Bosch Features: Drills up to 30% faster (25 mm diameter) than
comparable competitor tools. Low vibration values of only 8 m/s? for fatigue-free working due to
Bosch Vibration Control. Extremely robust due to aluminium gear housing Extremely fast changing
between SDS-plus and quick-change chuck for drilling in wood and metal Compact design for
perfect handling Technical Data: Rated power input: 900 W Impact energy: 0 - 5 J Impact rate at
rated speed: 0-3,600 bpm Rated speed: 0 - 760 rpm weight: 4.7 kg Tool holder: SDS-plus
97
Angle Grinder GWS7100SET by Bosch Features: Ø56mm slim housing in round shape for super
comfortable holding Dimple surface for anti-slip Powerful and robust 720 W motor Specially
designed air inlets for optimal air flow and cooling Small gear head for working in tight spaces
Gear head can be rotated in 90° steps Armoured coils that protect motor against sharp grinding
dust for longer service life Auto cut-off carbon brushes Two-motion switch for maximum user's
safety Spindle lock for easy disc change Anti-rotation protective guard to provide reliable
protection Side handle can be used on right or left 3 grinding discs & carry included Inspection
98
Mitre Saw Stand MSTMTRSD by Master Craft Features: Folding mitre saw stand has a maximum
capacity of 300 lbs Adjustable mounting brackets accept most 10 and 12" mitre saws Adjustable
extension arms with work piece support Folds for easy storage when not in use (Saw not
included) Inspection recommended, as is (this item is subject of an insurance claim) RRP $259.00
99
Rotary Hammer GBH432DFR by Bosch Features: Rated power input 900 W Impact energy 0 - 5 J
Impact rate at rated speed 0 - 3600 bpm Rated speed 0 - 760 rpm Weight without cable 4.7 kg
Toolholder SDS-plus Inspection recommended, as is (this item is subject of an insurance claim)
RRP $495
100
Glue Mixer by Detroit 2 speed mechanical gear box Soft start Variable speed Impact Power:
1600w No Load RPM: 180-460, 300-750 Spindle: M14 Length: 350mm Weight: 7kg Mixing paddle
and 2 x wrenches Inspection recommended, as is (this item is subject of an insurance claim) RRP
$279
101
Cordless LITHIUM-ION Red Heated Jacket Kit by Milwuakee Size: Small Superior Run-Time: Up
to 6 hours of continuous heat per battery charge Water and Wind Resistant 3 Heat Zones
distribute heat to core body areas 3 Heat Settings Plus Warm-up Feature Easy Touch Heat
Controller Convenient Battery Holder Pocket on backside of Jacket Specifications: Voltage 12V
Heat Elements Core Zone: R Chest, L Chest, Back Heat Settings 3 + Warm-Up Feature Gear
Material Soft Shell: 95% Polyester / 5% Spandex Pockets 2 side hand pockets + Cell Phone/MP3
chest pocket Battery Type M12™ REDLITHIUM™ Rechargeable Charge Time 30 minutes
102
Cordless LITHIUM-ION Red Heated Jacket Kit by Milwaukee Size: Large Superior Run-Time: Up
to 6 hours of continuous heat per battery charge Water and Wind Resistant 3 Heat Zones
distribute heat to core body areas 3 Heat Settings Plus Warm-up Feature Easy Touch Heat
Controller Convenient Battery Holder Pocket on backside of Jacket Specifications: Voltage 12V
Heat Elements Core Zone: R Chest, L Chest, Back Heat Settings 3 + Warm-Up Feature Gear
Material Soft Shell: 95% Polyester / 5% Spandex Pockets 2 side hand pockets + Cell Phone/MP3
chest pocket Battery Type M12™ REDLITHIUM™ Rechargeable Charge Time 30 minutes
22
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
103
Angle Grinder Set GWC850 by Bosch 850 watts power Particularly small grip circumference for
safe, fatigue-free working Armoured coil Cut-out carbon brushes Good handling due to
ergonomically adapted housing Flat gear head Spindle lock for easy disc changes Axial locking of
protective guard Safety switch Handle can be used on right or left Gear head can be rotated in
90deg steps Also suitable for left-handers Suitable for SDS quick-locking nut (special accessory)
Rated power input: 850 W No-load speed: 11.000 rpm Grinding spindle thread: M 14 Disc
diameter: 115 mm Rubber sanding plate, diameter: 115 mm Wire cup brush, diameter: 70 mm
Weight: 1,5 kg Inspection recommended, as is (this item is subject of an insurance claim) RRP
$98.00
104
Angle Grinder Set GWC850 by Bosch 850 watts power Particularly small grip circumference for
safe, fatigue-free working Armoured coil Cut-out carbon brushes Good handling due to
ergonomically adapted housing Flat gear head Spindle lock for easy disc changes Axial locking of
protective guard Safety switch Handle can be used on right or left Gear head can be rotated in
90deg steps Also suitable for left-handers Suitable for SDS quick-locking nut (special accessory)
Rated power input: 850 W No-load speed: 11.000 rpm Grinding spindle thread: M 14 Disc
diameter: 115 mm Rubber sanding plate, diameter: 115 mm Wire cup brush, diameter: 70 mm
Weight: 1,5 kg Inspection recommended, as is (this item is subject of an insurance claim) RRP
$98.00
105
Rotary Hammer Drill by Bosch Features: Bosch Vibration Control System SDS-Plus tool holder D
handle at rear Overload Safety Clutch Bosch Vario Lock for chisel rotation Soft grip for user
comfort Specifications: Rated power: (W) 850 No load speed: (rpm) 0 - 1,300 Impact rate: (bpm )
0 - 5,100 Impact energy: (J) 3.2 Drilling ? concrete: (mm) 28 Drilling ? steel: (mm) 13 Drilling ?
wood: (mm) 30 Max core-cutting diameter: (mm) 68 Safety Clutch: Yes Vibration control: Yes
weight: (kg) 3.4 Part Number: 0 611 268 140 Barcode: 3 165 140 761 338 Inspection
recommended, as is (this item is subject of an insurance claim) RRP $229
106
Cordless Brushless Rotary Hammer by Bosch Features: Recharges all M18, M14 and M12
REDLITHIUM-ION battery packs Recharges in sequence - first in, first to charge - resulting in less
time needed to manage charging cycles REDLITHIUM-ION 3.0 Ah battery packs recharge in 60
min or less REDLITHIUM-ION 1.5 Ah battery packs recharge in 30 min or less Specifications:
Voltage: 12V, 14V, 18V Charge time: 1.5Ah: 30 minutes 3.0Ah: 60 minutes Inspection
107
108
23
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
109
28 Piece All Purpose Pro Bi-Metal Hole Saw Kit by Milwaukee Features: Ice Hardened for up to
50% longer life than the competition Optimized tooth form for up to 2X faster cutting Functional
slots for faster plug removal Matrix II bi-metal teeth for greater durability Storage space for one (1)
12" extension or two (2) 6" extensions Specifications: Twenty-two (22) hole saws: 19, 22, 25, 29,
32, 35, 38, 44, 51, 54, 57, 64, 67, 76, 83, 86, 92, 95, 105, 108, 114 & 121mm ( 3/4", 7/8", 1", 11/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", 2-1/2", 2-5/8", 3", 3-1/4", 3-3/8", 3-5/8", 3-3/4",
4-1/8", 4-1/4", 4-1/2", 4-3/4" ) Three (3) arbors: 49-56-7000, 49-56-7010, 49-56-9100 Three (3)
drill bits: 49-56-8010 One (1) adapter One (1) spacer Carry Case wioth space for additional hole
saws Inspection recommended, as is (this item is subject of an insurance claim)
110
28 Piece All Purpose Pro Bi-Metal Hole Saw Kit by Milwaukee Features: Ice Hardened for up to
50% longer life than the competition Optimized tooth form for up to 2X faster cutting Functional
slots for faster plug removal Matrix II bi-metal teeth for greater durability Storage space for one (1)
12" extension or two (2) 6" extensions Specifications: Twenty-two (22) hole saws: 19, 22, 25, 29,
32, 35, 38, 44, 51, 54, 57, 64, 67, 76, 83, 86, 92, 95, 105, 108, 114 & 121mm ( 3/4", 7/8", 1", 11/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", 2-1/2", 2-5/8", 3", 3-1/4", 3-3/8", 3-5/8", 3-3/4",
4-1/8", 4-1/4", 4-1/2", 4-3/4" ) Three (3) arbors: 49-56-7000, 49-56-7010, 49-56-9100 Three (3)
drill bits: 49-56-8010 One (1) adapter One (1) spacer Carry Case wioth space for additional hole
saws Inspection recommended, as is (this item is subject of an insurance claim)
111
Cordless Circular Saw by Bosch Features: Unique Bosch Premium lithium-ion technology for
400% longer lifetime and unbeatable battery runtime Bosch Electronic Cell Protection (ECP):
protects the battery against overload, overheating and total discharge Ergonomically shaped
handle with comfort zone in the softgrip area for a secure hold and fatigue-free working Infinitely
variable cutting depth setting by means of quick-clamping lever Bosch Hyper Charge: due to the
rapid charging process, the batteries are charged to 75% after just half of the charge time
Specifications: No-load speed 3,900 rpm Saw blade diameter 165 mm Saw blade bore diameter
20 mm Battery voltage 18 V Inspection recommended, as is (this item is subject of an insurance
claim) RRP $139
112
Job Site Radio by Milwaukee Features: Exclusive AM/FM tuner with digital processor delivers
highest reception accuracy and signal clarity. Premium speakers and 40W amplifier produce rich
and full sound. Weather sealed auxiliary compartment protects MP3 players and other audio
devices. Powered by M12, M14, M18, M28, V18, V28 & PBS 3000 batteries or an AC outlet.
Shock absorbing ABS polymer and steel construction protects against weather and abusive job
site conditions. Customizable equalizer and 10-station preset. Specifications: Voltage (AC):220240V Voltage (DC):12V / 18V / 28V Dimension:495 x 241 x 279mm Speaker Output:40W
Weight:7.3kg Inspection recommended, as is (this item is subject of an insurance claim) RRP
$138.00
113
2 Piece Combo Kit DLX2005M by Makita Kit Includes: Makita 18V Li-lon Cordless Hammer Drill
Driver (DHP458Z) Makita 18V LXT Li-Ion Cordless Impact Driver (DTD146Z) 2x Makita 18V 4.0Ah
Li-ion Slide Battery (BL1840) 1x Makita 18V Li-ion Cordless Battery Fast Charger (DC18RC) Hard
Case Inspection recommended, as is (this item is subject of an insurance claim) RPP $499.99
114
24
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
115
116
117
2 Piece Combo Kit DLX2012X by Makita Features: Single Sleeve Keyless chuck All metal gear
construction LED Job light with afterglow function High Power-to- weight ratio obtained by
employing 4-pole motor Ergonomically designed handle Variable speed Control by trigger
Redesigned, compact belt clip Reversing Mechanical 2 - speed Electric Break Keyless Chuck
Torque setting 16 Specifications: Capacity Steel: 13mm (1/2') Capacity Wood: 38mm (1-1/2')
Capacity Masonary: 13mm (1/2') No Load speed (Hi): 0-1,500rpm No Load speed (Lo): 0-400rpm
Max. fastening torque (Hard): 50N.m Max. fastening torque (Soft): 36N.m Dimensions (L x W x H):
206 x 79 x 251mm weight: 1.3kg Inspection recommended, as is (this item is subject of an
insurance claim) RPP $499.99
118
119
120
25
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
121
Heavy Duty Mitre Saw Stand with Wheels by Milwaukee Features: Material supports with steel
rollers 2500 kg table area weight capacity Rubber wheels Collapsible and adjustable legs 81cm
working height Quick to assemble, set up in seconds Compatible with most 10 and 12" mitre saws
Specifications: Height: 810mm Base length: 1100mm Extendable up to: 3000mm Folds down to:
1200mm Bearing force: 250kg weight: 23kg Inspection recommended, as is (this item is subject of
122
4 Piece Cordless Combo Kit by Makita Features: Conveniently located push button for forward
and reverse High comfort grips Ideal for applications in tight spaces Two speed gear box LED job
light Key-less 3 jaw chuck for use with your existing accessories Specifications: Voltage: 10.8V
Drilling capacity: Steel: 10mm Wood: 21mm Max fastening torque: 24Nm No Load Speed: High: 0
- 1,300rpm Low: 0 - 350rpm Length: 183mm Weight: 1kg Inspection recommended, as is (this
item is subject of an insurance claim) RRP $189
123
2 Piece Combo Kit DLX2005X1 by Makita Includes: DHP458 - Hammer Drill/Driver DTD146 Impact Driver 3 x 18V 3.0Ah Batteries Fast Charger Kitbox Inspection recommended, as is (this
124
2 Piece Combo Kit DLX2002M by Makita Combo Includes: DHP480 - Mobile Brushless Hammer
Drill Driver DTD129 - Mobile Brushless Impact Driver 2 x 18V 4.0Ah Batteries Charger Kitbox
125
126
127
Angle Grinder DCG412N by Dewalt Features: Latest generation premium Grinder featuring new
XR Lithium Ion Technology Part of the intelligent XR Lithium Ion Series designed for efficiency
and making applications faster Powerful and Highly Efficient PM58 DEWALT fan cooled motor
with replaceable brushes, delivers up to 7000 rotations per minute for fast cutting and grinding
applications Steel cut spiral bevel gears provide highest level of durability and low vibration,
increasing user productivity Low profile jam pot gear case improves gear durability and
ergonomics Intelligent trigger & lock-off switch for enhanced work safety and control Intelligent
trigger & lock-off switch for enhanced work safety and control Specifications: Voltage: 18V Max.
Disc Diameter: 125mm Power output: 405 watts No Load Stroke Rate: 0-7000 rpm Spindle
Thread: M14 Length: 400mm Weight: 6kg Inspection recommended, as is (this item is subject of
128
Recipricating-Sabre Saw by Dewalt Features: Compact, lightweight design Latest generation
premium Reciprocating Saw featuring new XR Lithium Ion Technology Part of the intelligent XR
Lithium Ion Series designed for efficiency and making applications faster Powerful & Highly
Efficeint PM58 DEWALT fan cooled motor with replaceable brushes, delivers fast cutting action up
to 2,950 strokes per minute and 28.6 mm stroke length maximising user productivity Intelligent
variable speed trigger, lock-off switch and electronic motor brake for quick controlled cuts and
enhanced work safety Lever-action keyless blade clamp for quick and easy blade changes
Pivoting adjustable shoe with open top for high stability and blade visibility during a cut Fourposition blade clamp allows for flush cutting and increased versatility Improved ergonomic design
Specifications: Voltage: 18 V Power Output: 560 Watts No Load Stroke Rate: 0-2950 spm Stroke
Length: 28.6 mm Weight: 2.7 kg Height: 195 mm Battery chemistry: XR Li-Ion Length: 425 mm
26
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
129
Portable Welding Machine by Cigweld 240 Volt, 15 Amp Supply Lead Over temperature cut out
Shielding gas operation Gasless operation Fan cooled Maximum mild steel wire size of 0.9mm AS
compliant Kit includes: Powersource, worklead & mig torch, shielding gas regulator, mig torch
spares & feed roll, gasless mould steel wire. Inspection recommended, as is (this item is subject of
130
6 Piece Combo Kit by Makita Kit Includes: Brushless Hammer Drill Driver Brushless Impact Driver
Brushless 125mm Angle Grinder Brushless 165mm Circular Saw Brushless 3 Mode Rotary
Hammer Drill Torch 2x 5.0Ah Li-ion Batteries Charger Carry Bag Inspection recommended, as is
(this item is subject of an insurance claim) RRP $1.399
131
Angle Grinder by AG750-100 Milwaukee Features 750W motor delivering 10,000 rpm Compact
and slim design 2 position handle Light weight 1.8 kg Burst resistant guard Specifications Power
input 750 W Disc diameter 100 mm No load speed 10,000 rpm Cutting depth max. 15mm Spindle
thread M10 weight 1.8kg Inspection recommended, as is (this item is subject of an insurance
claim) RRP $73.55
132
claim) RRP $73.55
133
claim) RRP $73.55
134
claim) RRP $73.55
135
6 Piece Combo Kit by Makita Kit Includes: Brushless Hammer Drill Driver Brushless Impact Driver
Brushless 125mm Angle Grinder Brushless 165mm Circular Saw Brushless 3 Mode Rotary
Hammer Drill Torch 2x 5.0Ah Li-ion Batteries Charger Carry Bag Inspection recommended, as is
(this item is subject of an insurance claim) RRP $1.399
136
Dust Extractor by TTI 800 flux 550w Inspection recommended, as is (this item is subject of an
Mini Dust Extractor by Sabre 100mm inlet 750W motor 30 micron bag Wheel kit, stand andbag
clamps included Inspection recommended, as is (this item is subject of an insurance claim) RRP
$199
137
138
Belt & Disc Sander with stand by Sabre Work table tilt up to 45deg Belt table tilt up to 90deg
Induction Motor Inspection recommended, as is (this item is subject of an insurance claim) RRP
$399
139
Belt & Disc Sander with stand by Sabre Work table tilt up to 45deg Belt table tilt up to 90deg
Induction Motor Inspection recommended, as is (this item is subject of an insurance claim) RRP
$399
140
Scissor Stand Saw Table by DeWalt Inspection recommended, as is (this item is subject of an
27
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
141
Wood Bandsaw by Sabre Magnetic safety switch Induction motor 2 Speed option Rack and pinion
adjustment on top blade guide Quick release blade tensioning mechanism and sight indicator
Safetly locks on doors Inspection recommended, as is (this item is subject of an insurance claim)
RRP $899
142
Motion Action Screwdriver by Dewalt Powerful 7.2V Screwdriver for screwdriving applications
Gyroscopic operation coupled with variable speed up to 430rpm allows for the greatest levels of
control Two position handle offers best ergonomic solution to suit user and application Inspection
recommended, as is (this item is subject of an insurance claim)
143
Motion Action Screwdriver by Dewalt Powerful 7.2V Screwdriver for screwdriving applications
Gyroscopic operation coupled with variable speed up to 430rpm allows for the greatest levels of
control Two position handle offers best ergonomic solution to suit user and application Inspection
144
Plate Joiner by Makita 6 adjustable depth settings A professional joiner with precision grooving,
flat dowel joints and wall/ceiling capabilities The base is set up to work with 19mm material without
adjustment Optional 110mm 24t (A-07244) blade will give you 25mm depth of cut making it ideal
for undercutting doors and skirting boards Inspection recommended (this item is subject of an
145
30m Water Hose Reel by HRD Inspection recommended, as is (this item is subject of an
Garden hose reel 20m Inspection recommended, as is (this item is subject of an insurance claim)
$99
Earth Auger by Sabre 51cc Motor 200mm Bit Maximum Bit Diameter 300mm 1 or 2 Person
operation Anti Vibration handle Full Crank Start Inspection recommended, as is (this item is
subject of an insurance claim) $499
146
147
148
Earth Auger by Sabre 51cc Motor 200mm Bit Maximum Bit Diameter 300mm 1 or 2 Person
subject of an insurance claim) $499
149
Icekeg IK25WCO by Frontier, 2.5L Inspection recommended, as is (this item is subject of an
insurance claim) $22.95 ea (sold price per each)
Icekeg IK25WCO by Frontier, 2.5L Inspection recommended, as is (this item is subject of an
insurance claim) $22.95 ea (sold price per each)
Miter Saw LS1216 by Makita 305mm Blade (2mm) Vertical Vise Makita Dust Bag Triangular Rule
Socket Wrench Hex Wrench Inspection recommended, as is (this item is subject of an insurance
claim) RRP 4975
150
151
152
Miter Saw LS1216 by Makita 305mm Blade (2mm) Vertical Vise Makita Dust Bag Triangular Rule
claim) RRP 4975
153
Disc Grinder G23SSHH1 by Hitachi Capacity: Wheel Dia: 230mm (9") Capacity: Hole Dia: 22mm
(7/8") Spindle Thread: M14 x 2 Power Input: 1,900W No Load Speed: 6,600/min. Overall Length:
463mm (18-7/32") Weight: 4.3kg (9.5lbs.) Inspection recommended, as is (this item is subject of
154
Disc Grinder G23SSHH1 by Hitachi Capacity: Wheel Dia: 230mm (9") Capacity: Hole Dia: 22mm
(7/8") Spindle Thread: M14 x 2 Power Input: 1,900W No Load Speed: 6,600/min. Overall Length:
463mm (18-7/32") Weight: 4.3kg (9.5lbs.) Inspection recommended, as is (this item is subject of
28
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
155
Power Tool Stand with Power Board by Detroit Strong, stable aluminium T-Slot Bed Onboard 4
outlet power board - max 2400W load Includes onboard storage case Operation height 820mm
Bed length 1570mm Includes 2 x support rails, 2 x easy glide rollers Inspection recommended, as
is (this item is subject of an insurance claim) RRP $179
156
Circular Saw DWE560-XE by Stanley Power Input 1350 Watts Power Output 850 Watts No Load
Speed 5500 rpm Blade Diameter 184 mm Blade Bore 20 mm Bevel Capacity 48 ° Max. Depth of
Cut at 90º 65 mm Max. Depth of Cut at 45º 42 mm Weight 3.7 kg Length 286 mm Height 226 mm
157
Circular Saw DWE560-XE by Stanley Power Input 1350 Watts Power Output 850 Watts No Load
Speed 5500 rpm Blade Diameter 184 mm Blade Bore 20 mm Bevel Capacity 48 ° Max. Depth of
Cut at 90º 65 mm Max. Depth of Cut at 45º 42 mm Weight 3.7 kg Length 286 mm Height 226 mm
158
3 Piece Combo Kit DLX303T by Makita Kit Includes: 18V LI-ION CORDLESS BRUSHLESS
HAMMER DRIVER DRILL 18V LI-ION CORDLESS BRUSHLESS IMPACT DRIVER 18V LI-ION
CORDLESS 125MM (5") BRUSHLESS ANGLE GRINDER 18V 5.0AH LI-ION BATTERY 18V LIION CORDLESS BATTERY FAST CHARGER 600MM LARGE CORDLESS TOOLS DUFFEL
CARRY BAG LXT401 Inspection recommended, as is (this item is subject of an insurance claim)
RRP $609
159
RRP $609
160
Blower DUB183Z by Makita Features: Long leaf blower nozzle with a curved flat end enables the
user to use comfortably in an upright posture 3 air volume setting, high/medium/low Variable
speed control by trigger Ergonomically designed handle Blower function Anti-static electricity for
comfortable operation Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
Specifications: Air volume 2.6m3/min Air speed 52m/s No load speed: 0-18,000rpm Dimensions
(L x W x H) 845 x 155 x 212mm Weight 1.9kg with battery Inspection recommended, as is (this
161
6 Piece Combo Kit DLX601M by Makita Kit Includes: Brushless Hammer Drill Driver Brushless
Impact Driver Brushless 115mm Angle Grinder Brushless 165mm Circular Saw Mobile Reciprocal
Saw Swivel Head Torch Inspection recommended, as is (this item is subject of an insurance
claim) (sold per each) RRP $899
162
RRP $609
29
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
163
164
165
Parts Washer PW20G by Total Tools Importing 75L Inspection recommended, as is (this item is
subject of an insurance claim) RRP $189
Dust Extractor RDC200 by Total Tools Importing 2530M3/HR Suction Power 1500W Motor, 230V
Wet/Dry Vacuum DVTM60 by Detroit Dual Motor HEPA filter Water protected power switch Multidirectional castor wheels Onboard accessory storage Telescopic wand Rated power input: 1200W
1.8m flexible hose Inspection recommended, as is (this item is subject of an insurance claim) (sold
per each)
166
167
168
Air Compressor MCX6DS by Michelin Housing made of sound proof material to reduce operating
noise Ergonomic design allows compressor to work horizontally or vertically Hand carry
Maintenance free Self lubricating Air receiver: 6 Ltr Air displacement: 160 Ltr/min Max pressure: 8
Bar Motor power: 1100 Watt peak Inspection recommended, as is (this item is subject of an
169
Air Compressor MCX6DS by Michelin Housing made of sound proof material to reduce operating
noise Ergonomic design allows compressor to work horizontally or vertically Hand carry
Maintenance free Self lubricating Air receiver: 6 Ltr Air displacement: 160 Ltr/min Max pressure: 8
Bar Motor power: 1100 Watt peak Inspection recommended, as is (this item is subject of an
170
Bench Grinder Stand by Detroit 278x245x740mm Grinder bench stand Suits 150mm and 200mm
Grinders 315x250mm metal table with mounting bolts (hole centres from 190mm to 325mm)
Adjustable working heights from 710-910mm Cast iron base Grinding wheel holders Coolant and
parts tray Floor mountable Suits Detroit Grinder - HBG620A Inspection recommended, as is (this
171
Thermal rolls by Total Tool Imports Box of 24 Inspection recommended, as is (this item is subject
of an insurance claim)
Tool Bag DT8320QZ by Dewalt -Reinforced bottom and sides for excellent contents protection. Numerous large pockets for organisation and easy storage. -Double stitching and steel reinforced
rivets for strength and long life. -Heavy duty handles designed for heavy loads. -Special
compartment for secure document storage. -Heat formed pockets keep their shape, remaining
open for easy access. Inspection recommended, as is (this item is subject of an insurance claim)
172
30
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
173
6 Piece Combo Kit DCZ693M3-XE by DeWalt Kit Includes: 18V XR LI-ION CORDLESS HAMMER
DRILL DRIVER 18V XR LI-ION CORDLESS COMPACT IMPACT DRIVER 18V XR CORDLESS
LI-ION RECIPROCATING SAW 18V XR LI-ION CORDLESS CIRCULAR SAW 18V 125MM XR
LI-ION CORDLESS ANGLE GRINDER 18V XR LI-ION CORDLESS LED JOBSITE TORCH 18V
4.0AH XR LI-ION CORDLESS SLIDE BATTERY 18V XR LI-ION CORDLESS BATTERY
CHARGER HEAVY DUTY CONTRACTOR BAG Inspection recommended, as is (this item is
subject of an insurance claim) RRP $1,160.00
174
Tool Bag DT8320QZ by Dewalt -Reinforced bottom and sides for excellent contents protection. Numerous large pockets for organisation and easy storage. -Double stitching and steel reinforced
rivets for strength and long life. -Heavy duty handles designed for heavy loads. -Special
compartment for secure document storage. -Heat formed pockets keep their shape, remaining
open for easy access. Inspection recommended, as is (this item is subject of an insurance claim)
175
Hammer Drill DCD785C by DeWalt Voltage 18V MAX Max Power 350UWO Max rpm 0-600/02000 Chuck Size 1/2" Tool Weight 3.3lbs Inspection recommended, as is (this item is subject of
176
Angle Grinder G13SB3 by Hitachi Utilises standard 125 x 22mm bore wheel size Threaded
spindle size of M14 x 2mm Lockable slide switch on top Shaft lock button for easy wheel change
Two position anti-vibration side handle for easy operation and user flexibility Includes: side handle,
grinding disc and wrench Inspection recommended, as is (this item is subject of an insurance
claim) RRP $230
177
claim) RRP $230
178
claim) RRP $230
179
claim) RRP $230
180
181
4 Piece Combo Kit DLX4036T by Makita Kit Includes: DHP481Z Brushless Hammer Drill 125Nm
DSS611 Circular Saw DJR181Z Sabre Saw DML185 Torch 2 x 5AH Batteries Quick Charger Bag
31
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
182
4 Piece Combo Kit DLX4029 by Makita Kit Includes: - 1 x Makita 18V Hammer Drill Driver
(DHP458Z) - 1 x Makita 18V Impact Driver (DTD146Z) - 1 x Makita 18V 115mm(4 1/2") Angle
Grinder (DGA452Z) - 1 x Makita 18V Swivel Head Torch (BML185) - 3 x Makita 18V 3.0Ah Li-Ion
Batteries (BL1830) - 1 x Makita 18V Battery Charger (DC18RC) - 1 x Makita Super-Heavyweight
LXT Tool Bag Inspection recommended, as is (this item is subject of an insurance claim) RRP
$899
183
4 Piece Combo Kit DLX4036T by Makita Kit Includes: DHP481Z Brushless Hammer Drill 125Nm
DSS611 Circular Saw DJR181Z Sabre Saw DML185 Torch 2 x 5AH Batteries Quick Charger Bag
184
Wet/Dry Vacuum YLW77 by Detroit Stainless steel canister HEPA filter Water protected power
switch Multi-directional castor wheels Telescopic wand Onboard accessory storage Rated power
input: 1200W Rated voltage: 220-240V~50Hz 4m power cord Inspection recommended, as is (this
185
3 Piece Combo kit LXT320 by Makita Kit Includes - 1 x Makita 18V Hammer Drill Driver
(DHP458Z) - 1 x Makita 18V Impact Driver (DTD146Z) - 1 x 36V Rotary Hammer (2x18V
Batteries) (DHR264Z) - 2 x Makita 18V 4.0Ah Li-Ion Batteries (BL1840) - 1 x Makita 18V Li-Ion 4
Port Charger (DC18SF) - 1 x Makita Bag Inspection recommended, as is (this item is subject of an
insurance claim) RPP $999
186
Welder Inverter W1005175 by Cigweld Full Multi-Process Capabilities : GMAW/FCAW (MIG),
MMAW (Stick), GTAW (TIG) Standards Compliant Voltage Reduction Device (VRD) Fully
Compliant to AS 60974.1 Digital Voltage and Amperage Meters Enclosure Rated to IP23S 3 year
Limited Warranty Includes: Transmig powersource, tweco professional MIG torch, argon
regulator/flow meter. Feed rolls, contact tips, electrode holder with 4m lead, work cflamp with 4m
lead, shielding gas hose assembly & storage bag Inspection recommended, as is (this item is
subject of an insurance claim) RPP $1,199
187
188
189
32
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
190
191
4 Piece Combo Kit DCK490M2-XE by DeWalt Kit Includes: 18V XR LI-ION CORDLESS
COMPACT HAMMER DRILL DRIVER 18V XR LI-ION CORDLESS COMPACT IMPACT DRIVER
18V XR CORDLESS LI-ION RECIPROCATING SAW 18V XR LI-ION 165MM (6.5") CORDLESS
CIRCULAR SAW 18V 4.0AH XR LI-ION CORDLESS SLIDE BATTERY 18V XR LI-ION
CORDLESS BATTERY CHARGER TOUGHSYSTEM SMALL TOOL BOX TOUGHSYSTEM
LARGE TOOL BOX Inspection recommended, as is (this item is subject of an insurance claim)
RRP $1,160.00
4 Piece Combo Kit DCK490M2-XE by DeWalt Kit Includes: 18V XR LI-ION CORDLESS
COMPACT HAMMER DRILL DRIVER 18V XR LI-ION CORDLESS COMPACT IMPACT DRIVER
18V XR CORDLESS LI-ION RECIPROCATING SAW 18V XR LI-ION 165MM (6.5") CORDLESS
CIRCULAR SAW 18V 4.0AH XR LI-ION CORDLESS SLIDE BATTERY 18V XR LI-ION
CORDLESS BATTERY CHARGER TOUGHSYSTEM SMALL TOOL BOX TOUGHSYSTEM
LARGE TOOL BOX Inspection recommended, as is (this item is subject of an insurance claim)
RRP $1,160.00
Miter Saw DW713-XE by Dewalt SPECIFICATIONS • Mitre Capacity (Left and Right) • Bevel
Capacity 48/-3 ° • Max. Depth of Cut at 90º • Max. Depth of Cut at 45º • Power Input 1600 Watts •
Blade Speed 5000 rpm • Blade Diameter: 250 mm • Blade Bore 30 mm • Mitre Capacity [right/left]
50/50 ° • Cutting Capacity at 90°/90° (W x H) 162x41 mm • Cutting Capacity at 45°/90° (W x H)
114x41 mm • Cutting Capacity at 90°/45° (W x H) 162x25 mm • Max. Cutting Capacity at 45°/45°
114x25 mm • Max. Depth of Cut [Saws] 89 mm • Weight 13.6 kg • Depth 620 mm • Length 510
mm • Height 570 mm Inspection recommended, as is (this item is subject of an insurance claim)
RRP $399
192
193
194
195
33
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
196
197
198
Wheeled Fuel Container by Duramax 53L Includes Flo n Go Fluid transfer siphon/pump Inspection
Inverter 170 by Cigweld Fan Cooled improved duty cycle and welding performance. Over
Temperature Cut out Protection Power source is suitable for 2.00mm, 2.5mm, 3.2mm and 4.0mm
electrode sizes Australian Standards Compliance Australian Standards Compliance This power
source complies to the relevant Australian Standard, AS 60974.1-2006 Inspection recommended,
as is (this item is subject of an insurance claim) RRP $339
199
200
Portable DC Welding Machine Inverter 170 by Cigweld Fan Cooled improved duty cycle and
welding performance. Over Temperature Cut out Protection Power source is suitable for 2.00mm,
2.5mm, 3.2mm and 4.0mm electrode sizes Australian Standards Compliance Australian
Standards Compliance This power source complies to the relevant Australian Standard, AS
60974.1-2006 Inspection recommended, as is (this item is subject of an insurance claim) RRP
$339
201
$339
202
$339
203
$339
34
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
204
$339
205
$339
206
$339
207
$339
208
Portable Table Saw by Detroit Rip fence with magnifying indicator Blade guard with dust extractor
hose Table with steel extensions: 638 x 865mm Blade tilting range: -2deg to 47deg Inspection
209
Woodworking Table by Detroit Inspection recommended, as is (this item is subject of an insurance
claim)
Green Crossline Laser by Extreme Inspection recommended (this item is subject of an insurance
claim)
Green Crossline Laser by Extreme Inspection recommended (this item is subject of an insurance
claim)
Chop Saw by Milwaukee FEATURES: 2300 Watt motor with 3800 rpm for excellent cutting
performance Lock pin function keeps the saw closed position during transportation (no chain
required) Quick release mitre adjustment for fast angle settings from -45? to +45? Quick release
vice clamp for fast work piece change Spindle lock for fast and easy disc change Easy brush
change due to external brush doors Integrated metal fan for best durability and long life Stamped
steel base with additional ribs to prevent deforming SPECIFICATIONS: Power input 2300 W No
load speed 3800 rpm Abrasive wheel diameter 355 mm Cutting capacities at 90?, 45?: Round
profile Square profile Rectangular profile L-Shape profile 125 mm, 100 mm 115 mm, 80 mm
230x70 mm, 100x80 mm 130 mm, 80 mm weight 18.0kg Drilling capacity with tunnel bits 50-80
mm Arbour size 25.4mm INCLUDES: Spanner Allen Key 355 mm Cutting Disc Inspection
210
211
212
213
Job SIte Radio by Hitachi Includes: 1 x AC Adapter (DC 12V 850 mA) 3 x AA Batteries 1 x
Cushion sheet Weight: 3.6kg Inspection recommended, as is (this item is subject of an insurance
claim) RRP $129
35
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
214
Cordless Blower by Hitachi 27 minutes continuous operation with 18V 4.0ah battery Variable
speed control trigger allows air volume to be adjusted depending on the triggering amount on the
switch. This is convenient for cleaning works requiring air volume adjustment Doubles as vacuum
with dust bag sold as an optional accessory (323587) Thin handle grip comfortably fits in the palm
of a hand Optional Li-ion batteries feature multiple protection circuit that protects the battery & tool
from overload, over heat, over discharge & over charge Air Pressure 3.9KPA Inspection
215
Cordless Blower by Hitachi 27 minutes continuous operation with 18V 4.0ah battery Variable
speed control trigger allows air volume to be adjusted depending on the triggering amount on the
switch. This is convenient for cleaning works requiring air volume adjustment Doubles as vacuum
with dust bag sold as an optional accessory (323587) Thin handle grip comfortably fits in the palm
of a hand Optional Li-ion batteries feature multiple protection circuit that protects the battery & tool
from overload, over heat, over discharge & over charge Air Pressure 3.9KPA Inspection
216
Circular Saw C7MFA by Hitachi FEATURES: Rigid aluminium base for fine cut Parallel adjustment
on base Robust and light weight SPECIFICATIONS: Blade Diameter: 190mm (7-1/2") Blade Bore:
20mm (3/4") Max. Cut Depth 90?: 68mm (2-11/16") Max. Cut Depth 45?: 46mm (1-13/16") Power
input: 1,010W No Load speed: 5,500/min. overall length: 291mm (11-29/64") weight: 3.6kg
(7.9lbs.) INCLUDES: Hitachi 1010W C7MFA 190mm (7") Circular Saw 2 x 40 Tooth 190mm
Blades Parallel Guide Wrenches Inspection recommended, as is (this item is subject of an
217
218
219
Wet/Dry Vacuum YLW6222 by Detroit HEPA filter Water protected power switch Multi-directional
Rated power input: 1200W Rated voltage: 220-240V~50Hz Inspection recommended (this item is
220
Demolition Saw/Power Cutter EK7651H by Makita Features: 4 stroke with low noise, low fuel
consumption and clean exhaust emissions result in low running costs Cutting Depth 122mm
Cutting Disc 355mm Engine Displacement 75.6cc Engine Oil Capacity 220mL Fuel Tank Capacity
1.1L Noise dB 92.7 Overall Length 780mm Power 3.0kW / 4.02HP Weight 12.9kg Inspection
36
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
221
Plasma Cutter by Cigweld Features: Precision engineered consumable parts are easy to change
& require no tools Two modes of operation available - standoff cutting or drag cutting Light weight,
flexible 3m torch leads Latch feature allows the cutting arc to remain active without constantly
depressing the torch switch Specifications: 240Volt 15amp supply lead input frequency: 50Hz
Generator requirement: 10kVA output range: 15 - 35 amps Thermal Dynamics 1Torch SL60
plasma torch 3MTR Duty Cycle: 35A@30% Maximum cutting capacity: 10mm Inspection
recommended, as is (this item is subject of an insurance claim) RRP $1,129
222
Portable MIG Welder by Cigweld Specifications: Input Voltage : 240 Volts +/- : 15% (15A plug)
Input Frequency : 50 Hz Generator requirement 7 kVA Output range : 41 - 130 amps (150 max)
Rated output @ Duty Cycle : 130A/20.5V @ 10% Duty Cycle Dimensions (HxWxD) : 375 x 245 x
420mm Weight (Power Source) : 20 kg Includes: WeldSkill 150 MIG power source Work lead and
MIG gun WeldSkill shielding gas regulator/flowmeter 0.8mm WeldSkill mild steel gasless wire
Spare torch consumables Spare feed rolls Operating manual Inspection recommended (this item
is subject of an insurance claim) RRP $599
223
Cut Off Saw DC0S355 by Detroit Features: Cast iron base Powerful 2000W Motor No load speed:
2900rpm Blade size:355x25.4x3mm Includes 1 x metal cut off disc Inspection recommended, as is
224
225
226
Jobsite Radio DCR017-XE by Dewalt Features: DAB+ and FM tuner receives digital and analogue
signal Multi-voltage XR charger with charge indicator LED light Accepts 10.8V, 14.4V and 18V XR
Li-Ion batteries (not included) Two AC power outlets offer more versatility for jobsite power (except
-LX version) Tech Box provides device protection and storage 3.5mm auxiliary port allows for
connection to portable audio devices USB port in Tech Box for device charging (when connected
to mains) Blow moulded roll cage with 6 impact resistance points for maximum durability Twin sets
of woofers and tweeters with ported bass for high fidelity audio 2m power cord with wrap-around
cord storage Inspection recommended, as is (this item is subject of an insurance claim) RRP
$339.00
$339.00
227
37
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
228
229
$339.00
Pressure Washer by Karcher Specifications: Pressure: 2030 PSI Water flow rate: 7.5 L/min
Wattage: 2100 Motor Induction: watercooled Hose length: 10 meter T-300 Patio Cleaner 'T-Racer'
230
Manual Sweeper S650 by Karcher Features: Adjustable & ergonomic push handle : Comfortable
handling, fits different body sizes perfectly Stowage position : The unit can folded completely flat
for space saving storage Stand alone waste container with integrated handle : Makes the
emptying easier Specifications Working width with side brush : 650mm Max. area performance :
1800m²/h Plastic Housing / frame Weight : 11kg Container : 16 L Inspection recommended, as is
(this item is subject of an insurance claim) $259
231
Manual Sweeper S650 by Karcher Features: Adjustable & ergonomic push handle : Comfortable
handling, fits different body sizes perfectly Stowage position : The unit can folded completely flat
for space saving storage Stand alone waste container with integrated handle : Makes the
emptying easier Specifications Working width with side brush : 650mm Max. area performance :
1800m²/h Plastic Housing / frame Weight : 11kg Container : 16 L Inspection recommended, as is
(this item is subject of an insurance claim) $259
232
Pressure Washer K5.700 by Karcher Specifications: Pressure: 2030 PSI Water flow rate: 7.5
L/min Wattage: 2100 Motor Induction: watercooled Hose length: 10 meter T-300 Patio Cleaner 'TRacer' Inspection recommended, as is (this item is subject of an insurance claim) RRP $645
233
Jobsite Radio DCR017-XE by Dewalt Features: FM/AM tuner receives analogue signal Accepts
10.8V, 14.4V and 18V XR Li-Ion batteries 3.5mm auxiliary port allows for connection to portable
audio devices Blow moulded roll cage with 6 impact resistance points for maximum durability Twin
sets of woofers and tweeters with ported bass for high fidelity audio 2m power cord with wraparound cord storage (Sold Individually, Price per radio) Inspection recommended, as is (this item
is subject of an insurance claim) RRP $199.00
234
Twin Blade Supercutter OX-P810 by OX Features: 2 blades revolve in opposite directions,
eliminating any kick back Universal cutting; wood, metal, plastic, rubber and composite materials
Dust extraction for improved efficiency Inspection recommended, as is (this item is subject of an
235
Weldskill Portable Welder W1006200 by Cigweld Features: AC/DC Lift TIG (GTAW), HF TIG
(GTAW), Stick (MMAW) High Frequency start Digital voltage and amperage meters 2T or 4T
Up/Down slope (4T only) Pulse available on AC or DC TIG Gas Purge in Lift TIG and HF TIG
modes Specs: Supply Voltage 240V, +/- 15%, 15A Plug 50/60Hz Generator Requirement 10kVA
Current Range (DC TIG) 5 - 200A Current Range (DC Stick) 5 - 170A Duty Cycle (DC TIG) 200A
@ 20%, 18V (40ºC, 10mins) Duty Cycle (DC Stick) 170A @ 15%, 26.8V (40ºC, 10mins Max OCV
76V DC Dimensions 400H x 240W x 475D mm Power Source Weight 22 kg Inspection
38
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
236
Rotating Laser Level CXR880 by Red Back Lasers Features: Electronic Self Levelling Horizontal
Rotation for Levelling 4 Vertical Lines + Plumb Up and Down Dual Grade Capable Rechargeable
& Std Battery Operation LCD Display Dual Use Receiver Inspection recommended (this item is
subject of an insurance claim) RRP $1,499
237
Rotary Hammer Drill HP1630K by Makita Features: Aluminium gear housing cover Keyed chuck
Side grip Variable switch with forward/reverse change lever Rubberised soft grip Dual-operation
mode: Rotation only/Hammering with rotation 16mm masonry capacity Inspection recommended,
238
Rotary Hammer Drill HP1630K by Makita Features: Aluminium gear housing cover Keyed chuck
Side grip Variable switch with forward/reverse change lever Rubberised soft grip Dual-operation
mode: Rotation only/Hammering with rotation 16mm masonry capacity Inspection recommended,
239
Cordless Magnetic Core Drill MAG 28 LTX 32 by Metabo Includes: Industrial holder for Weldon
shank 19 mm Ejector pin (6.35 x 77 mm) Geared chuck 13 mm with adapter MK2 Chuck key MK 2
drift key Safety strap Allen key 2 x 3.0 Ah Li-ion battery packs AIR COOLED" super quick charger
ASS 15 Plus Transport case Specifications: Type of battery pack: Li-ion Battery capacity: 3.0Ah
Maximum drilling diameter: With core drill: 32mm With spiral drill: 13mm Maximum drilling depth:
50mm Magnetic stand: Maximum stroke: 160mm Dimensions of the magnet base: 70mm x
190mm Idle revolutions: 380/680 /min Bit retainer: Morse taper MK 2, Weldon shaft 19 mm (3/4")
Height (including motor): Carriage lowest position: 455mm Carriage top-most position: 615mm
weight (including battery pack): 14.5kg Inspection recommended (this item is subject of an
insurance claim) RRP $2,850
240
Impact Wrench DCF889M2 By DeWalt Specifications: Voltage: 18V Bit holder: 1/2" (12.7mm) No
load speed: 0 - 1,500rpm Impacts per minute: 0 - 2,600ipm Max torque: 418 Nm Max bolt
diameter: M20 (Sold Individually, Price Per Drill) Inspection recommended (this item is subject of
241
Circular Saw DCS373N by DeWalt Specifications: No Load speed: 0 - 3,700rpm Bore Size: 20mm
weight: 4kg length: 350mm Height: 210mm Blade Diameter: 140mm Cutting Depth at 90 degree:
43mm Inspection recommended, as is (this item is subject of an insurance claim) RRP $279.00
242
Wet/Dry Vacuum SE122 by Stihl Features: Pleated pet-fleece air filter for superior performance
Additional fleece filter for trapping fine particles Built-in filter cleaning system for easy
maintenance Stainless steel vacuum tubes for exceptional durability 10-foot suction hose 25-foot
electrical cord Full range of vacuum attachments for any job Tool holder keeps all attachments
with the unit Inspection recommended, As is (this item is subject of an insurance claim) RRP $499
243
Wet/Dry Vacuum NT351TACT by Karcher Features: Motor: 240V, 10A 300mm Wet and dry floor
tool Heavy duty single motor operation TACT – fully automatic filter cleaning system 35L waste
tank allows for many hours of use without stopping Accessory and suction hose storage Flat
pleated filter Protection class, II 2 x Fixed rear wheels, 2 x castors on front Inspection
recommended As is(this item is subject of an insurance claim) RRP $899
244
Wetstone Grinder Tiger 2500 by Scheppach Features: German design & technology 200W
Industrial induction - type motor for long lasting smooth performance Break - proof water tank
Removable leather honing wheel (200 x 30mm). After Sharpening, it removes the burr to give you
a smooth edge. Designed for uninterrupted operation Ideal for tradesman Rotation speed 90
rev/min Includes a special stone (250 x 50mm K220) containing grain of aluminium oxide to
achieve the perfect grinding results at a much faster time, also ideal for HSS tools Inspection
39
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
245
Wetstone Grinder Tiger 2500 by Scheppach Features: German design & technology 200W
Industrial induction - type motor for long lasting smooth performance Break - proof water tank
Removable leather honing wheel (200 x 30mm). After Sharpening, it removes the burr to give you
a smooth edge. Designed for uninterrupted operation Ideal for tradesman Rotation speed 90
rev/min Includes a special stone (250 x 50mm K220) containing grain of aluminium oxide to
achieve the perfect grinding results at a much faster time, also ideal for HSS tools Inspection
246
Air Plasma Cutting System KUPJR40 by Uni-Mig Welding Specs: Primary Input Voltage 240V 1
Phase Current Range 20 - 40 Duty Cycle 40 Deg C 30% @ 40A / 100% @25A Max Cutting
Thickness (mm) 10 Dimensions (mm) 371 x 155 x 295 Weight (Kgs) 12 Inspection recommended
247
248
249
Demolition Saw 2-Stroke Power Cutter DPC7331 by Makita Specs: Arbor diameter 25.4mm
Cutting depth 122mm Cutting disc 355mm Cutting speed 80m/s Displacement 73cc Fuel tank
capacity 1.1L Power 4.2kW/ 5.7HP Weight 10kg Inspection recommended, as is (this item is
250
Demolition Saw 2-Stroke Power Cutter DPC7331 by Makita Specs: Arbor diameter 25.4mm
Cutting depth 122mm Cutting disc 355mm Cutting speed 80m/s Displacement 73cc Fuel tank
capacity 1.1L Power 4.2kW/ 5.7HP Weight 10kg Inspection recommended, as is (this item is
251
2 Piece Combo Kit DCK290M2-XE by DeWalt Kit Includes: DCD985 - Hammer Drill Driver
DCF885 - Impact Driver 2 x 18V 4.0Ah batteries Charger Kitbox Inspection recommended, as is
(this item is subject of an insurance claim) RRP $1,160.00
252
2 Piece Combo Kit DCK291M2-XE by DeWalt Kit Includes: • DCD985 XRP Hammer Drill •
DCF895 Brushless Impact Driver • 2 x 18V(4.0Ah) Slide Pack Batteries • Multi-voltage charger •
DS150 Tough System Kit Box Inspection recommended, as is (this item is subject of an insurance
claim) RRP $1,160.00
253
Demolition Saw DPC7331 by Makita Arbor diameter 25.4mm Cutting depth 122mm Cutting disc
355mm Cutting speed 80m/s Displacement 73cc Fuel tank capacity 1.1L Power 4.2kW/ 5.7HP
Weight 10kg Inspection recommended, as is (this item is subject of an insurance claim) RRP $995
254
6 Piece Combo Kit DCK653P3-XE by DeWalt Kit Includes: 18V XRP LI-ION CORDLESS
BRUSHLESS 3-SPEED HAMMER DRILL 18V XR LI-ION CORDLESS BRUSHLESS IMPACT
DRIVER 18V XR CORDLESS LI-ION RECIPROCATING SAW 18V XR LI-ION 165MM (6.5")
CORDLESS CIRCULAR SAW 18V 125MM XR LI-ION CORDLESS ANGLE GRINDER 18V XR LIION CORDLESS LED JOBSITE TORCH 18V 5.0AH XR LI-ION CORDLESS SLIDE BATTERY
18V XR LI-ION CORDLESS BATTERY CHARGER TOUGHSYSTEM MEDIUM TOOL BOX
TOUGHSYSTEM LARGE TOOL BOX Inspection recommended, as is (this item is subject of an
insurance claim) RRP $1,160.00
40
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
255
256
257
Miter Saw DWS780-XE by DeWalt Specifications: Watts: 1675W Blade Diameter: 304mm (12")
Amps: 15Ah No Load speed: 3,800rpm Arbor Size: 5/8" or 1" Vertical Capacity: Baseboard
Against Fence: 171mm Crown Molding Vertically Nested: 190mm Horizontal Capacity: Baseboard
Against Fence: 406mm Crown Molding Vertically Nested: 349mm 45° Bevel Cut Capacity
(dimensional lumber): 2 x 14 (2 x 16 with back fence) 90° Cross-Cut Capacity: Dimensional
lumber: 2 x 14 (2 x 16 with back fence) Max Width: 406mm 45° Miter Cut Capacity: Max Height: 2
x 12 Max Width: 2 x 12 Weight: 25.4kg Inspection recommended, as is (this item is subject of an
258
259
260
Scaffold GSO1 by Gorilla 4 x Horizontals, 1 x Diagonal Brace, 2 x End Frames, 1 x Trapdoor Tray
and 4 x 12 5mm (6") Locking Castors. Inspection recommended, as is (this item is subject of an
41
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
261
Miter Saw MS216SB by Milwaukee Power input 1800W No load speed 5000 rpm Saw blade Size
216 x 30 mm Bevel (degrees) left 48° Bevel (degrees) right -2° Mitre (degrees) right 50° Mitre
(degrees) left 50° M 90° x 90° mm max. H x W 270 x 62 mm M 90' x 45'mm max. H x W 270 x 48
mm M45° x 90°mm max. H x W 190 x62 mm M45° x 45°mm max. H x W 190 x 48 mm Weight
262
Pressure Washer G2800FH by Karcher Specifications: Pressure PSI: 2800 (max) Water flow rate
l/min: 9.5 Max. water feed temperature: ?C40 Engine performance HP: 5.0 weight without
accessories kg:24 Dimensions (L x W x H): 597 x547 x 620 Inspection recommended, as is (this
263
Painting PLatform MW105-I450 by Gorilla Features: Large platform area Positive locks Multiheights 450mm wide platform Inspection recommended, as is (this item is subject of an insurance
claim) RRP $159
264
Painting PLatform MW105-CWB by Gorilla Features: • Platform tested to AS/NZS 1892.1:1996
Section 9.3.3 • Features Large platform area & positive locks. • Adjustable to multiple heights
Specifications: • Rating : 120kg Industrial • Height : 0.6-0.9m (2-3ft) • Platform size : (390 x
1150mm) • Weight : 8.0kg • With Connecting Brackets Inspection recommended, as is (this item is
265
Painting PLatform MW105-I450 by Gorilla Features: Large platform area Positive locks Multiheights 450mm wide platform Inspection recommended, as is (this item is subject of an insurance
claim) RRP $159
266
Drill Press with bench ZQJ4119K by Saber Grooved bench with drain 1.5-16mm keyless chuck 12
speed Heavy duty handle 356mm swing Heavy cast base Inspection recommended, as is (this
267
Earth Auger Bit by Saber 51cc Motor 200mm Bit Maximum Bit Diameter 300mm 1 or 2 Person
268
Framing Nailer DCN690M2 by DeWalt Nail Diameter: 2.8-3.3mm Magazine angle: 30-34 degree
Magazine loading: Rear Load Magazine capacity: Up to 55 nails weight: 4.2kg Nail capacity in
C24 structural timber: 50-90mm Ring Shank Paper collated nail type: Clipped head or offset
Impact energy: 105 Joules Nails per charge: 600+ Inspection recommended, as is (this item is
subject of an insurance claim)
269
Framing Nailer DCN690M2 by DeWalt Nail Diameter: 2.8-3.3mm Magazine angle: 30-34 degree
Magazine loading: Rear Load Magazine capacity: Up to 55 nails weight: 4.2kg Nail capacity in
C24 structural timber: 50-90mm Ring Shank Paper collated nail type: Clipped head or offset
Impact energy: 105 Joules Nails per charge: 600+ Inspection recommended, as is (this item is
270
Rotary Hammer DCH213-XE by DeWalt Voltage: 18V Power output: 300W No load speed: 0 1,100rpm Impact energy (EPTA 05/2009): 2.0J Blows per minute: 0 - 4,200bpm Tool holder: SDSPlus Max drilling capacity: Wood: 26mm Metal: 13mm Concrete: 20mm Length: 270mm Height:
192mm Hand/arm vibration: 8m/s² Weight: 2.9kg Inspection recommended, as is (this item is
271
Combo kit by Milwaukee Contents to carry bag Inspection recommended, as is (this item is
Work Vice UWCST03 by Detroit Ideal for working on small work pieces Size: 545 x 200 x 180mm
Suts Detroit Tool Stand UWCST1570 Inspection recommended, as is (this item is subject of an
272
42
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
273
274
Combo kit by Milwaukee Contents to carry bag Inspection recommended, as is (this item is
Magnetic Drill MCD32 by Saber Features: Large capacity coolant tank Through spindle coolant
system Extra long travel 175mm Super strong magnetic adhesion Accessories: Chuck Chuck key
Safety strap Coolant bottle 3 Hex keys 3 Feed handles Arbor Inspection recommended, as is (this
275
Magnetic Drill MCD32 by Saber Features: Large capacity coolant tank Through spindle coolant
system Extra long travel 175mm Super strong magnetic adhesion Accessories: Chuck Chuck key
Safety strap Coolant bottle 3 Hex keys 3 Feed handles Arbor Inspection recommended, as is (this
276
Red Rotary Laser H1R by Lasertec Lasertec H1R LED detector and clamp Laser target Laser
glasses Carry case Batteries Inspection recommended, as is (this item is subject of an insurance
claim)
277
Portable Miter Saw Stand T1B by Bosch Features: The sturdy and compact benchtop stand
Universal and compact: east to transport Sturdy quality design Light weight mitre saw stand for
mitre and combo saws Tool mounts with safety lock for fast and safe assembly Workpiece support
with roller and gauge for optimum support of long workpieces Height adjustable leg for uneven
floors up to 30 mm Rubber end caps on legs for rough surfaces Foldable legs that are easy to fold
/ unfold with push button Specifications: length of work bench without extension 1220 mm weight
with/without accessories 19,0 / 15,0 kg length of work bench with extension 2630 mm Height of
work bench 940 m Inspection recommended, as is (this item is subject of an insurance claim)
278
Portable Miter Saw Stand T1B by Bosch Features: The sturdy and compact benchtop stand
Universal and compact: east to transport Sturdy quality design Light weight mitre saw stand for
mitre and combo saws Tool mounts with safety lock for fast and safe assembly Workpiece support
with roller and gauge for optimum support of long workpieces Height adjustable leg for uneven
floors up to 30 mm Rubber end caps on legs for rough surfaces Foldable legs that are easy to fold
/ unfold with push button Specifications: length of work bench without extension 1220 mm weight
with/without accessories 19,0 / 15,0 kg length of work bench with extension 2630 mm Height of
work bench 940 m Inspection recommended, as is (this item is subject of an insurance claim)
279
Rotary Hammer M18CH402C by Milwuakee M18 Fuel Brushless Motor Battery pack Inspection
Miter Saw Stand MSL1000 by Milwaukee Features: Light weight aluminum, easy to transport onto
job site 1.2 m total length will fit into most vans and cars Extendable each side - 2.0 m extended
Quick release brackets One point leg adjustment for leveling on uneven ground Height adjustable
length stops Will hold up to 180 kg Compact foldable design Universal - Compatible with most 810 Mitre Saws Full compatible with Milwaukee MS216SB and MS305DB Specifications: Height:
850 mm Base length: 1081 mm Extendable up to: 2082 mm Folds down to: 1081 mm Bearing
force: 180 kg weight:16.6 kg Inspection recommended, as is (this item is subject of an insurance
claim) RRP $128
280
281
Miter Saw Stand MSL1000 by Milwaukee Features: Light weight aluminum, easy to transport onto
job site 1.2 m total length will fit into most vans and cars Extendable each side - 2.0 m extended
Quick release brackets One point leg adjustment for leveling on uneven ground Height adjustable
length stops Will hold up to 180 kg Compact foldable design Universal - Compatible with most 810 Mitre Saws Full compatible with Milwaukee MS216SB and MS305DB Specifications: Height:
850 mm Base length: 1081 mm Extendable up to: 2082 mm Folds down to: 1081 mm Bearing
force: 180 kg weight:16.6 kg Inspection recommended, as is (this item is subject of an insurance
claim) RRP $128
43
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
282
Pedistal Fan DFS75 by Detroit 290 m3 / minute airflow Fixed or 90degrees oscillating head 3
$139
283
Inverter Generator SABGEN1K by Saber Quiet operation – suitable for recreational and home use
Suitable for use with power tools Extremely lightweight for easy transportation Pure sine wave
technology – for use with frequency sensitive equipment including laptops Low oil shut down to
protect the engine Auto idle function conserves fuel LCD display which provides readings for
Wattage, Voltage, Hours Easy to use recoil start AC outlet Oil filler bottle and tool kit included
Inspection recommended, as is (this item is subject of an insurance claim) (sold per each) RRP
$549
284
Pressure washer SPW65 by Saber 6.5hp 2900psi Water flow rate: 10.5 L/min Italian designed
axial pump with brass head Thermal protection valve Low oil shutdown 5 Nozzles (0°, 15°, 25°,
40°, Soap) Chemical/detergent dispenser Adjustable handle In-line water filter Inspection
285
Pressure washer SPW65 by Saber 6.5hp 2900psi Water flow rate: 10.5 L/min Italian designed
axial pump with brass head Thermal protection valve Low oil shutdown 5 Nozzles (0°, 15°, 25°,
40°, Soap) Chemical/detergent dispenser Adjustable handle In-line water filter Inspection
286
Portable Table Saw RTS250QA by Detroit Rip fence with magnifying indicator Blade guard with
dust extractor hose Table with steel extensions: 638 x 865mm Blade tilting range: -2° to 47°
Inspection recommended, as is (this item is subject of an insurance claim)
287
Plasma television by Philips 42" Untested, as is, inspection recommended (this item is subject of
an insurance claim) (no cables)
HP Compaq Tower Windows XP Professional Product Key:RP9YR-4F3PH-428WF-BK44F-XXFD3
Untested, as is, inspection recommended (this item is subject of an insurance claim)
Compact Router with Base D26204K-XE by Dewalt SPECIFICATIONS • Power Input: 900 Watts •
Power Output: 620 Watts • No Load Speed: 16,000-27,000/min • Plunge Stroke/Movement: 55mm
• Collet Size: 6-8mm • Max. Cutter Diameter: 36mm • Weight: 2.9kg • Length: 110mm • Height:
270mm • Hand/Arm Vibration: 7.0m/s2 • Uncertainty K 1 (Vibration): 2.7m/s² • Sound Pressure:
77dB(A) • Uncertainty K 1 (Sound): 3.0dB(A) • Accoustic Pressure: 88dB(A) • Uncertainty K 2
(Sound): 3.0dB(A) Inspection recommended, as is (this item is subject of an insurance claim) RRP
$329
288
289
290
Dust Extractor RDC200A by Total Tools Importing Features: Rated Voltage: 230V - 50Hz Rated
Power Input: 2200W Speed: 2950rpm Inlet: 100mm x3 Measurement: 1170 x 560 x 570mm
291
Portable Thicknesser DW735-XE by DeWalt Specifications: Power Input - 1800 Watts No Load
Speed - 10,000 rpm Max. Capacity - 330 mm Max. Depth of Cut - 3 mm Max. Thicknesser
Capacity - 152 mm Feed Rate - 4 - 8 m/min Weight - 42 kg Inspection recommended, as is (this
292
Portable Petrol Inverter Generator SF3000 by Saber Specs: Runtime3.5h @ 100%, 6h @ 50%
Voltage230V @ 50Hz Warranty2 Year Trade Amps Continuous11.3A IP RatingIP23M Inspection
recommended, as is (this item is subject of an insurance claim) RRP $1,299
293
Mechanics Tool chest TTB9S3 by Total Tools Imports Features: Anodised aluminium drawer
handles Rolled drawer edges for added strend=gth Drawer Liners 701 x 320 x 451mm Inspection
recommended (this item is subject of an insurance claim)
44
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
294
Impact Wrench DCD785C2-XE by Dewalt Specs: Voltage: 18 V Chuck Capacity: 1.5 - 13 mm
Power Output: 350 Watts No Load Speed: 0-600/2,000 rpm Beats per Minute: 0-10,200/34,000
bpm Max Torque: 60 Nm Max. Drilling Capacity [Wood]: 38 mm Max. Drilling Capacity [Metal]: 13
mm Max. Drilling Capacity [Masonry]: 13 mm Weight: 1.24 kg Length: 202 mm Height: 190 mm
Width: 80 mm Inspection recommended, as is (this item is subject of an insurance claim) RRP
$336
295
Web Dog Load Binder 348000WF by Beaver Specs: 50mm Ratchet assemby 8mm Grab Hooks
3800kg Inspection recommended, as is (this item is subject of an insurance claim)
Rotary Hammer KANGO950S by Milwaukee Features: 27 J blow energy for best in class breaking
performance 1700 watt motor - best in class with plenty in reserve for the toughest applications
Ideal for usage with generators DIGITRONIC-fullwave electronics for precise power adjustment to
application 2 handles - all with AVS (Anti-Vibration-System) and soft grip for comfortable and less
tiring use In-Line motor design for more comfort in below waist Âapplications Automatic lubrication
system for longer life time Specifications: Power input - 1700 W Blow energy - 27 J Blow rate
(under load) - 975-1950 bpm Full load speed - 125-250 rpm Drilling cap. with solid bits/core bits 28-50/45-150 mm Drilling capacity with tunnel bits - 50-80 mm Weight with straight handle 11.8kg Vibration level (3-axis) Drilling into concrete/breaking - 12.5/11.0 m/s2 Inspection
296
297
Manual Sweeper by Detroit Wet & Dry use Working width 750mm Large 50L easy to use empty
container Replacable roatating brushes Adjustable broom height Works on a variety of surfaces
298
Manual Sweeper by Detroit Wet & Dry use Working width 750mm Large 50L easy to use empty
container Replacable roatating brushes Adjustable broom height Works on a variety of surfaces
299
Left Side Undertray Tool Box by H.R.D HRD - Aluminium Undertray Ute Storage LHS - ATB724L
Left Hand side 750 x 520mm 1.5mm Aluminium Chequer Plate Extra Thick Top for Secure
Mounting Stainless Steel Lockable T-Handle Stainless Steel Piano Hinge Fully Welded Seams
Suitable for most 1 tonne vechiles Inspection recommended, as is (this item is subject of an
insurance claim)
300
Right Side Undertray Tool Box by H.R.D HRD - Aluminium Undertray Ute Storage RHS ATB724L Left Hand side 750 x 520mm 1.5mm Aluminium Chequer Plate Extra Thick Top for
Secure Mounting Stainless Steel Lockable T-Handle Stainless Steel Piano Hinge Fully Welded
Seams Suitable for most 1 tonne vechiles Inspection recommended, as is (this item is subject of
an insurance claim)
301
Cordless Rotary Hammer by Milwuakee 1 x Depth rod 1 x Side handle Features: Up to 20%
Faster Up to 50% More Life Drills over 100 Holes 5/8" Capacity Light weight and Compact Ideal
for Overhead Concrete Drilling Specifications: Voltage: 18V LED Light: Yes No load speed: 0 1,300rpm Blow per minute: 0 - 7,000bmp Blow energy: 1.35 Nm Trigger lock: No Solid bit
capacity: 5/8 Drilling modes: 2 - Rotary Hammer and Drill only Handle style: drop motor Vibration
reduction: No length: 304mm weight: 2.5kg Inspection recommended, as is (this item is subject of
45
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
302
303
304
305
306
307
46
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
308
309
310
311
Aluminium Toolbox by HRD 1.5 & 2mm aluminium chequer plate Lockable T-handles Full rubber
seal Gas struts Inspection recommended, as is (this item is subject of an insurance claim)
Grinder angle 100mm 730w, Hitachi, inspection recommended, as is (this item is subject of an
Angle Grinder by Hitachi Max. Wheel Diameter: 100mm Input Power: 730W No Load Speed:
10,000 (min-1) Hole Diameter: 16mm Spindle Thread: M10 x 1.5 Weight: 1.4kg Length: 254mm
Standard Accessories: Side handle, grinding disc, wrench and carry case Inspection
312
313
314
Angle Grinder by Hitachi Max. Wheel Diameter: 100mm Input Power: 730W No Load Speed:
10,000 (min-1) Hole Diameter: 16mm Spindle Thread: M10 x 1.5 Weight: 1.4kg Length: 254mm
Standard Accessories: Side handle, grinding disc, wrench and carry case Inspection
315
85 Piece Pistol Driver and Bit Set by Makita inspection recommended, as is (this item is subject of
an insurance claim) RRP $70 ea
$138.00
316
47
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
317
$138.00
318
High Visibilty Cordless Heated Jacket by Milwuakee Size: Large Superior run time: up to 8 hours
of continuous heat per battery charge Water and wind resistant for a variety of weather conditions,
ideal for cold weather activities Easy touch heat controller concealed inside the lapel + 3 heat
settings + warm-up feature 3 carbon fibre heat zones, right chest, left chest and central back
distribute heat to core body areas Expandable battery pouch for use with all M12™ REDLITHIUMION battery packs Inspection recommended, as is (this item is subject of an insurance claim) RRP
$239
319
Slide Compound Mitre Saw LS1216 by Makita Specifications: Power 1650W Blade Diameter
305mm (12") Bore Size 25.4mm (1") Crown Moulding (nested) 203mm Soft Start Electric Break
Constant Torque Baseboard (vertical) 165mm Max. Cutting Capacity Miter Capacity @ 90°
120mm x 382mm & @45L/R 69mm x 382mm No Load RPM 3,200 Size(L x W x H) 806mm x
640mm x 721mm Net Weight : 26kg Contents: Makita 305mm Blade Vertical Vise Triangular Rule
claim) RRP $899
320
Red Rotary Laser H1R by Lasertec Features: Lasertec H1R LED detector and clamp Laser target
Laser glasses Carry case Batteries Inspection recommended, as is (this item is subject of an
insurance claim)
321
Red Rotary Laser H1R by Lasertec Features: Lasertec H1R LED detector and clamp Laser target
Laser glasses Carry case Batteries Inspection recommended, as is (this item is subject of an
insurance claim)
322
Aluminium Tool Box by HRD 2.0mm Aluminium Checker Plate construction 1 tonnerLight &
Durable Lockable 1210mm Inspection recommended, as is (this item is subject of an insurance
claim)
323
Impact Driver by Milwaukee 18V 1/4" HEX [BATTERY NOT INCLUDED] Inspection
Impact Driver by Milwaukee 18V 1/4" HEX [BATTERY NOT INCLUDED] Inspection
2 Piece Combo Kit by Makita Includes: 1 x Makita 18V Li-ion Cordless Brushless Hammer Driver
Drill - Skin Only 1 x Makita 18V Li-Ion Cordless 3-Speed Brushless Impact Driver - Skin Only 2 x
Makita 18V 5.0Ah Li-Ion Battery 1 x Makita 18V Li-ion Cordless Battery Fast Charger 1 x Makita
18V Brushless Compact Twin Case to suit DTD129 / DHP480 / DHP481 Inspection
recommended, as is (this item is subject of an insurance claim) (sold per each) RRP $595 ea
324
325
326
327
HP Compaq CPU, untested, as is, inspection recommended (this item is subject of an insurance
claim)
Benq monitor, untested, as is, inspection recommended (this item is subject of an insurance
claim)
48
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
328
Table Saw MLT100 by Makita Bevel Cutting Capacity 0-45deg Blade Diameter 255mm Capacity at 45 degrees 63mm Capacity - at 90 degrees 90.5mm Continuous Rating Input 1,500W Net
Weight 34.8kg Inspection recommended, as is (this item is subject of an insurance claim) RRP
$529
329
Table Saw MLT100 by Makita Bevel Cutting Capacity 0-45deg Blade Diameter 255mm Capacity at 45 degrees 63mm Capacity - at 90 degrees 90.5mm Continuous Rating Input 1,500W Net
Weight 34.8kg Inspection recommended, as is (this item is subject of an insurance claim) RRP
$529
330
Pressure Washer by Sabre 6.5hp 3000psi Vanguard - Briggs & Stratton Engine Water flow rate:
10.5 L/min Italian designed axial pump with brass head Thermal protection valve 5 Nozzles (0°,
15°, 25°, 40°, Soap) Chemical/detergent dispenser Adjustable handle In-line water filter Inspection
331
Pressure Washer by Sabre 6.5hp 3000psi Vanguard - Briggs & Stratton Engine Water flow rate:
10.5 L/min Italian designed axial pump with brass head Thermal protection valve 5 Nozzles (0°,
15°, 25°, 40°, Soap) Chemical/detergent dispenser Adjustable handle In-line water filter Inspection
332
Combo kit by Makita Contents to carry bag Inspection recommended, as is (this item is subject of
an insurance claim)
Generator by Saber 7hp Petrol Engine 2.6kva 2800W maximum output Electric, recoil and remote
start IP44 rated 15A socket outlets Automatic voltage regulator (AVR) Pure sine wave (low
harmonic distortion <5%) 12V DC 8.3A outlet with surge protection Auto choke RCD/CBE
333
334
335
336
337
338
339
Trolley hand truck 250kg Inspection recommended, as is (this item is subject of an insurance
claim) RRP $30.99
Trolley hand truck 200kg Inspection recommended, as is (this item is subject of an insurance
claim) RRP $25
Tripod & 5m/5 Section Staff Combo by Powerline Tools Inspection recommended, as is (this item
Generator by Saber 15hp Petrol Engine 7kva 7500W maximum output IP66 rated 15A socket
outlets Automatic voltage regulator (AVR) Pure sine wave (low harmonic distortion <5%) 12V DC
8.3A outlet with surge protection Digital multifunction meter Inspection recommended, as is (this
item is subject of an insurance claim) (not in box) RRP $999
340
Drill Press by Saber Grooved bench with drain 1.5-16mm keyless chuck 12 speed Heavy duty
handle 356mm swing Heavy cast base Inspection recommended, as is (this item is subject of an
341
Line Trimmer by Makita Inspection recommended, as is (this item is subject of an insurance claim)
RRP $99.00
Line Trimmer FSE71 by Stihl Inspection recommended (this item is subject of an insurance claim)
RRP $109.99
Line Trimmer FSE71 by Stihl Inspection recommended (this item is subject of an insurance claim)
RRP $109.99
342
343
49
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
344
6 Piece Combo Kit DLX6010M by Makita DHP458 - 18V Hammer Drill Driver DTD146 - 18V
Impact Driver DGA452 - 18V 115mm Angle Grinder DJR182 - 18V Reciprocating Saw DHR202 18V 24mm Rotary Hammer BML185 - 18V Torch 2 x 18V 4.0Ah batteries Charger Kitbag
345
Slide Compound Mitre Saw by Makita Contents: Makita 305mm Blade Vertical Vise Triangular
Rule Socket Wrench Hex Wrench Inspection recommended, as is (this item is subject of an
346
Slide Compound Mitre Saw by Makita Contents: Makita 305mm Blade Vertical Vise Triangular
Rule Socket Wrench Hex Wrench Inspection recommended, as is (this item is subject of an
347
Pressure Washer by Saber 2kW 2175psi Water flow rate: 6.67 L/min Max pressure: 2175psi
Working pressure: 1595psi 6m hose with reel In-line filter Inspection recommended, as is (this
348
349
350
351
352
353
Blower by Makita 3 air volume setting, high/medium/low Approximate continuous operation time
on a single full battery charge (mins) - High 12 - Medium 25 - Low 85 Variable speed control by
trigger Ergonomically designed handle Blower function Anti-static electricity for comfortable
operation Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries Inspection recommended,
354
Multi Process Welding Inverter 200i by Cigweld Full multi process capabilities : GMAW/FCAW
(MIG), MMAW (Stick), GTAW) TIG Standards Compliant, Voltage Reduction Device (VRD) Fully
Compliant to AS 60974.1 Digital voltage and amperage meters Enclosure rated to IP23S PFC (
Power Factor Correction) Inspection recommended, as is (this item is subject of an insurance
claim) RRP $1,154
355
Mitre Saw GCM 12 GDL by Bosch Cutting capacity:104 x 341 mm Cutting capacity:45 mitre 104 x
240 mm Cutting capacity:45 bevel 51 x 341 mm Mitre setting:52 L / 60 R Bevel setting:47 L / 47 R
Depth x length x height:67 x 82 x 69 cm No-load speed:3.800 rpm Saw blade diameter:305 mm
Saw blade bore diameter:30 mm Weight:32,1 kg Rated power input:2.000 W Inspection
50
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
356
357
358
Generator by Saber 15hp Petrol Engine 7kva 7500W maximum output IP66 rated 15A socket
outlets Automatic voltage regulator (AVR) Pure sine wave (low harmonic distortion <5%) 12V DC
8.3A outlet with surge protection Digital multifunction meter CBE Inspection recommended, as is
359
4 Piece Combo Kit M18BPP4A303B by Milwaukee Includes: M18 GEN2 13mm Hammer
Drill/Driver (M18BPD-0) M18 GEN2 1/4” Hex Impact Driver (M18BID-0) M18 GEN2 16MM SDS
PLUS Rotary Hammer 2Mode (M18BH-0) M18 Heavy Duty 125mm Angle Grinder (HD18AG1250) 3 x Batteries REDLITHIUM (M18BX3.0AH) 12V/18V Dual Voltage Charger (M1218C)
360
2 Piece Combo Kit by Milwaukee Features: POWERSTATE BRUSHLESS MOTOR - Milwaukee?
designed and built brushless motor Up to 10x longer motor life REDLITHIUM-ION? BATTERY
PACK - Most durable pack on the market Fuel gauge displays remaining charge REDLINK PLUS?
INTELLIGENCE - Most advanced electronic system on the market Advanced overload protection
protects tool and battery pack from extreme applications Inspection recommended, as is (this item
361
2 Piece Combo Kit by Milwaukee Features: POWERSTATE BRUSHLESS MOTOR - Milwaukee?
designed and built brushless motor Up to 10x longer motor life REDLITHIUM-ION? BATTERY
PACK - Most durable pack on the market Fuel gauge displays remaining charge REDLINK PLUS?
INTELLIGENCE - Most advanced electronic system on the market Advanced overload protection
protects tool and battery pack from extreme applications Inspection recommended, as is (this item
362
Slide Compound Mitre Saw by Makita DXT (Deep eXact Technology) Capable of diagonal cutting
up to 203mm crown moulding Capable of vertical cutting up to 165mm baseboard Electric brake
Electronic with soft start and constant speed control Bevel range of 45° right and left with positive
stops at 22.5°, 33.5°, 45° Mitre range of 60deg right and 52deg left Quick and accurate mitre
angle lock Inspection recommended, as is (this item is subject of an insurance claim) RRP $340
363
Slide Compound Mitre Saw by Makita DXT (Deep eXact Technology) Capable of diagonal cutting
up to 203mm crown moulding Capable of vertical cutting up to 165mm baseboard Electric brake
Electronic with soft start and constant speed control Bevel range of 45° right and left with positive
stops at 22.5°, 33.5°, 45° Mitre range of 60deg right and 52deg left Quick and accurate mitre
angle lock Inspection recommended, as is (this item is subject of an insurance claim) RRP $340
364
Welding Trolley W4015000 by Cigweld Inspection recommended, as is (this item is subject of an
insurance claim)
51
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
365
366
Dual Bevel Slide Compound Mitre Saw by Milwaukee Features: Miter Angle Digital Readout
provides repeatable accuracy to 0.1° Miter Angle Fine Adjust with Detent Override makes it simple
to dial-in precise miter angles Dual Integral Jobsite Lights fully illuminate the work piece and cut
line from either side of the blade Motor provides increased power for high performance cutting in
hard lumber Constant Power Technology with Soft Start maintains constant cutting speed under
load and decreases start up head movement Integral Dust Channel captures up to 75% of the
dust and debris cut Dual Horizontal Steel Rails with three large linear bearings deliver smooth
sliding action Oversized Single Lever Bevel Adjustment with 9 Positive Bevel Stops allows the
saw to easily bevel left and right 0°- 48°and provides fast and accurate adjustments
Specifications: Watts: 1800W No Load speed: 3,200rpm Blade Diameter: 305mm (12") Arbor
Size: 15mm - 25mm Inspection recommended, as is (this item is subject of an insurance claim)
RRP $1,126
Sandblast garnet TWMIM Inspection recommended, as is (this item is subject of an insurance
claim) (sold price per each)
Super Sunday Online Auction
STARTS ONLINE AT 2PM
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
Dining suite (SH) 7 pc, 2000 x 1000mm polished timber table with 6 x cane chairs, timber frame,
chocolate cushions, inspection recommended
Chest of drawers (Sh) 4 drawer, thatched look, dark timber, inspection recommended
Dresser (SH) 7 drawer, thatched look, dark timber, inspection recommended
Bedside tables (SH) Qty 2, 2 drawer, thatched look dark timber (sold as pair) inspection
recommended
Bedside tables (SH) Qty 2, 1 door, 1 drawer, dark timber (sold as pair), inspection recommended
Tallboy (SH) 6 drawer, stained timber with cheval mirror, inspection recommended
Tallboy (SH) 6 drawer, stained timber, inspection recommended
Wardrobe (Sh) 2 door, multi-shelf, slatted stained timber, approx 18550 x 1200mm, inspection
recommended
Entertainment Unity (SH) 3 drawer, 2 door (glass) dark stained timber, inspection recommended
Display cabinet (SH) 2 drawer, 1 door (glass) stained pine, inspection recommended
Buffet (SH) 4 drawer, 4 x lattice doors, dark timber (4 keys with storeman) inspection
recommended
Tallboy (SH) 6 drawer, stained timber, inspection recommended
52
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
Shaggy rug 'Trinity' gold/melon 190 x 280 cm (Inspection recommended) (SH)
Lounge chair (SH) 3 seater, rolled arms, gold/chocolate, floral embroidery, inspection
recommended
Lounge suite, 'Jacey', includes 2.5 seater & 2.5 seater with chaise, chocolate leather (Untested,
inspection recommended) (S)
Bedroom chair (Sh) dark timber frame, cane, white cushion, inspection recommended
Tub chair (SH) carved dark timber, inspection recommended
Lounge chair, Lacada, 3 seater, natural fabric, inspection recommended (S)
Lounge suite, Celia including 3 + 3 seater with chaise taupe fabric, inspection recommended (S)
Lounge suite, Arena, 2.5 seater with chaise, mocha fabric, inspection recommended (S)
Floor rug, 'Plush', 350 x 300, taupe (inspection recommended) (S)
Lounge suite, 'lyon' 3+2 electric, chocolate leather (untested, inspection recommended) (S)
Lounge suite, Harris, 3 seater + ottoman, natural fabric, inspection recommended (S)
Lounge suite, Perla including 2.5 seater & curved 4 seater, bone leather, inspection
recommended (S)
Lounge suite, 'Letty' 3+R+R, mocha leather (inspection recommended) (S)
Coffee table, rectangle, double sided drawers, polished timber with iron handles (Inspection
recommended) (SH)
Letter holder, 2 door, 1 drawer, dark timber (Inspection recommended) (SH)
Bar stool, black seat with chrome base, foot rest & gas lift (sold per stool) (model CQ-7805-black),
As displayed,inspection recommended
Lounge suite, 'Clairmont', 3RR+R+R, electric, coffee leather (Untested, inspection recommended)
(S)
Dining chairs, 'Meddy' qty 2, old wood grey, sold as lot (inspection recommended) (S)
Dining chairs, qty 3, 'Karyn' old wood grey (inspection recommended) (S)
Corner lounge suite, Dolly, 2.5 seater with chaise, lime fabric, inspection recommended (S)
Lounge chair, Teresa, 3 seater, electric, mid blue leather, untested, inspection recommended (S)
Cd stand, 4 drawer stained timber (Inspection recommended) (SH)
Corner lounge suite, 'Stella', 5 seater with chaise, some peeling, burgundy leather (Inspection
recommended) (S)
Lounge suite, red fabric Lacada 3 piece includes 2 x swivel & one 3 seater with chrome legs,
damage to cushion (Inspection recommended) (SH)
Boab Tree Greco Dolce Bianco Vintage 2012 Alcohol 8% Region Yenda NSW Grape varieties
Greco Dolce Bianco Aroma ripe tropical fruits waiting to explode Palate passionfruit & lychee
flavours balanced by a creamy yet crisp finish Cellaring Can be enjoyed upon release Food Match
Ideal with squid, carpaccio & summer salads inspection recommended (sold per bottle, must take
multiples of 12)
Boab Tree Cabernet Merlot Vintage 2012 Alcohol 13.5% Region Yenda NSW Grape varieties
Cabernet Merlot Colour deep red hues Aroma red currant with hints of leafy notes & ripe plum
Palate A mid with textured tannins & oak finish Cellaring Can be enjoyed upon release Food
Match Ideal with Italian pastas or spicy curries inspection recommended (sold per bottle, must
take multiples of 12)
53
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2040
Boab Tree Cabernet Merlot Vintage 2012 Alcohol 13.5% Region Yenda NSW Grape varieties
Cabernet Merlot Colour deep red hues Aroma red currant with hints of leafy notes & ripe plum
Palate A mid with textured tannins & oak finish Cellaring Can be enjoyed upon release Food
Match Ideal with Italian pastas or spicy curries inspection recommended (sold per bottle, must
take multiples of 12)
2041
Boab Tree Shiraz Vintage 2012 Alcohol 13.5% Region Yenda NSW Grape varieties Shiraz Colour
crimson purple Aroma spicy forest berries & dark cherry notes Palate velvety tannins & savoury
warm texture of vanilla Cellaring Can be enjoyed upon release Food Match Ideal with marinated
or BBQ meats inspection recommended (sold per bottle, must take multiples of 12)
2042
Boab Tree Chardonnay Vintage 2012 Alcohol 12.5% Region Yenda NSW Grape varieties
Chardonnay Aroma peach & melon, subtle textured oak & citrus finish Palate A crisp zesty wine
Cellaring Can be enjoyed upon release Food Match Ideal with prawns, white fish & chilli
inspection recommended (sold per bottle, must take multiples of 12)
2043
Mattress Size Single Description Slumber sleep pillow top Sold per each Onsite inspection
recommended
recommended
recommended
recommended
recommended
Mattress Size Double Description Slumber sleep pillow top Sold per each Onsite inspection
recommended
recommended
recommended
recommended
Mattress Size Queen Description Slumber Sleep, pillow top Sold per each Onsite inspection
recommended
recommended
recommended
recommended
Mattress Size Queen Description Slumber Sleep super deluxe pillow top Sold per each Onsite
inspection recommended
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
54
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2068a
2068b
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
Mattress, King size, inner spring, Slumber sleep with pillow top, inspection recommended (note:
visible marks on corners)
Mattress, King size, inner spring, Slumber sleep with pillow top, inspection recommended (note:
visible marks on corners)
Mattress Size King Description Slumber sleep super deluxe pillow top Sold per each Onsite
Pillow, Latex 100% 600x400x10/12 (inspection recommended) (sold per each)
Electric lounge chair, Brandon, 2 seater, aqua leather, untested, inspection recommended (S)
Lounge chair, Clara, 3 seater, electric, burgundy leather, untested, inspection recommended (S)
Artwork, canvas scenery, set of 2 (Inspection recommended) (S)
Bar stools, qty 3, white upholstery, chrome frame (inspection recommended)(SH)
High bar table, round glass top, chrome base (inspection recommended)(SH)
Artwork, canvas Red Passion (Sold price per each, inspection recommended) (S)
Coffee table, 'Zen' 160 x 80, brown Tasmanian oak (inspection recommended) (S)
Dining chairs, Godiva, qty 15, white leather, chrome base, inspection recommended (S) (sold as
lot)
Ottoman, Gensq, orange leather, 1 x missing foot, inspection recommended (S)
Electric recliner chair, 'Stratford' pearl leather (untested, inspection recommended) (S)
Electric recliner chair, 'Jonas', earth leather (untested, inspection recommended) (S)
Chopping Block, "Alpine", 2 drawer, dark timber (inspection recommended)(S)
Papasan chair, white wicker with black cushion (Sold price per each, inspection recommended)
(S)
Papasan chair, white wicker with black cushion (Sold price per each, inspection recommended)
(S)
Lounge suite, "Tampa", 3 + 2 + 2, chocolate leather (inspection recommended)(S)
Recliner chair, 'Carlos', bisque leather (Untested, inspection recommended) (S)
Lounge chair, Waldorf, 3 seater, ivory leather, 2 x missing feet, tear to back, inspection
recommended (S)
Lounge chair, Sporty, 2.5RR, choc fabric, inspection recommended (SH)
Outdoor dinner setting, 'Sunco Berkley', 7 piece, sold new to box, assembly required, 4 boxes per
set (Sold price per each, inspection recommended) (S)
Ottoman, Bambino, blue fabric, inspection recommended (S)
Armchair, Aturo, dark brown leather, frayed edge, inspection recommended (S)
Hall runners qty 2 'Decor Rug' 80 x 150 cm beige (Sold as lot, inspection recommended) (SH)
55
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
Storage cabinet, 1 door beech laminate (Inspection recommended) (SH)
Laundry basket, white cane with lid (Inspection recommended) (SH)
Framed prints qty 2 butter flies (Inspection recommended) (SH)
Framed painting 'Floral arrangement' gold coloured frame (Inspection recommended) (SH)
Framed artwork 'Monkey Business' by Lee Carter 213 of 300 (Authenticity unknown, inspection
recommended) (SH)
Framed print 'Red Rose' silver frame #app 1140 x 940 mm (Inspection recommended) (SH)
Bedframe Queen white metal suitable for drop in ensemble, bolts with storeman (Inspection
recommended) (SH)
Framed memorabilia '2008 Olympic women's 4 x 100m relay team' signed (Authenticity unknown,
inspection recommended) (SH)
Bar Stool, black saddle seat with chrome base & foot rest, gas lift (Sold price per chair, AS
DISPLAYED) mod #CQ-8222-1-BLACK
Lounge suite, Elise, 2 chaise with middle chair, oat leather, inspection recommended (S)
Outdoor bar setting, 5pce, Torino, metallic frame with Torino bar sling chair, choc, inspection
recommended (S) (FLOOR MODEL)
Chest of 5 drawers, Split, blackwood with cheval mirror inspection recommended (S) (sold per
each)
Bedside, 3 drawer, blackwood, inspection recommended (S) (sold per each)
Outdoor multi position chair, Memphis, grey wicker, with cushion, inspection recommended (S)
(sold per each)
Outdoor multi position chair, Austin, charcoal wicker, with cushion, inspection recommended (S)
(sold per each)
Outdoor dining sofa, Atlanta, 3pce, brown wicker, with cushion & glass top, inspection
recommended (S) (sold per set)(HM21)
Multi function copier/scanner/printer, Konica Minolta, model C360, touch screen display, 1,200 dpi
print resolution with paper finisher, untested, inspection recommended (SH)
Framed artwork, Mountain Scene, artist John Caldwell, approx 163 x 115mm, inspection
recommended (SH) (Ex Hayman Island)
Framed artwork, Divided Gorge Mountains, artist John Caldwell, approx 166 x 116mm, inspection
recommended (SH) (Ex Hayman Island)
Lounge suite Valencia 2 piece red leather 3 seater and 1 electric recliner, leather peeling on 3
seater (Inspection recommended) (SH)
Treadmill Brand GoFit Silver Series Features 2.5HP, 20km/hr, 15 Levels, 148cm x 50cm, 12
preset, Max 145kg New in box Warranty 7 day return to store Sold per each Onsite inspection
recommended
2110
Elliptical Cross Trainer Brand GoFit Features Electronic resistance, 12 Programs, Handheld pulse
sensor Dimensions 160cm x 60cm, Max 110kg New in box Warranty 7 day return to store Sold per
each Onsite inspection recommended
2111
Vibration Platform Features 220V, 17 Speeds, 5 Preset, Oscillating Dimensions 82(L) x 89(W) x
112(H), maximum weight 120kg New in box Warranty 7 day return to store Sold per each Onsite
2112
Treadmill Brand GoFit Platinum Series Features 2.5HP, 20km/hr, 16 Levels, Spring style
cushioned deck 148cm x 50cm, 10 programmes, Polar chest belt, Max 145kg New in box
Warranty 7 day return to store Sold per each Onsite inspection recommended
56
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
Exercise bench with padded seat Model JX-JD2 Dimensions 1100(L) x 300(W) x 450mm(H) Some
assembly required New in box Sold per each Onsite inspection recommended
Letter holders/cigar box/storage box qty 6 assorted timber (Sold as lot, inspection recommended)
(SH)
Multi function copier, Ricoh Aficio MPC2051, Copy speed approx 20 copies per minute,
Resolution 600dpi, 4 bit, Paper input capacity Standard 2 x 250 sheet paper tray, Standard 1 x
100 sheet bypass tray, Maximum 1,600 sheets, Printer Language Standard PCL5c, PCL6, RPCS,
Option Adobe Postscript 3, Resolution 1,200dpi, 1 bit 600dpi, 2 bit/1 bit, Scanner Scan speed
B&W Maximum 44 originals per minute (LEF, A4), Colour 44 images per minute, Output formats
Tiff, JPEG, PDF, High compression PDF, untested, inspection recommended (SH)
Fridge only (SH) "Westinghouse" 252 lt, untested, inspection recommended
Washing machine (SH) "Fisher & Paykel "qucksmart", 5.5kg, untested, as is, inspection
recommended
French door fridge freezer (SH) "Electrolux" stainless steel, model EQE6007SA-NAU, 600 litre,
untested, small dent to front, inspection recommended
Fridge/freezer, side by side 'Whirlpool' water dispenser 639 litre (Untested, inspection
recommended) (SH)
Fridge/freezer, side by side 'Maytag' glass shelves (Untested, inspection recommended) (SH)
Fridge/freezer Westinghouse 390 litre model RE391Q-R (Untested, inspection recommended)
(SH)
Coffee machine (SH) "K-fee" with milk frother, untested, inspection recommended
Dishwasher, "Miele", model HG03, (untested inspection recommended)(SH)
Washing machine 'Hoover' 5.5 kg 550MA top loader (Untested, inspection recommended) (SH)
Fridge/freezer "LG" 318 ltr, model GR-T542GT (Untested, inspection recommended) (SH)
Fridge/freezer "Samsung" 301 ltr, model SR432VW (Untested, inspection recommended) (SH)
Bar fridge, 'Westinghouse' Silhouette (untested, inspection recommended) (SH)
Toaster oven, Homemaker, model MG14BC, 1420 watt (untested, inspection recommended) (SH)
Microwave oven, Homemaker, model EM820CTM, 1270 watt (untested, inspection recommended)
(SH)
Washing machine (SH) "Fisher & Paykel" Aqusmart, untested, inspection recommended
Deep freezer "Fisher & Paykel, approx 200 ltr (Untested, inspection recommended) (SH)
Fridge/freezer (SH) "Bosch" Intelligent Frostfree 44, untested, inspection recommended
Coffee machine (SH) "Delonghi" Magnifica, auto, untested, inspection recommended
Washing machine, front load 'Bosch' max 1200 (Untested, inspection recommended) (SH)
Washing machine, front load 'Panasonic' 8 kg 1400 (Untested, inspection recommended) (SH)
Freezer, upright conia model CUF-183 (untested, inspection recommended) (SH)
Chest freezer (SH) "Rankarena" 60 litre, untested, inspection recommended
Slow cooker, Cookwell, stainless steel, model HOMSC500S (untested, inspection recommended)
(SH)
Bar fridge, Heller, 80 litre, model BFH80 (untested, inspection recommended) (SH)
Washing Machine 'Simpson' Eziset 6 kg model SWT604 (Untested, inspection recommended)
(SH)
Dishwasher, Bosch, classic electronic (untested, inspection recommended) (SH)
Refrigerator/freezer 'Westinghouse' model HWTM 2800WB 280 litre, 1550 x 607 x 650 mm
(Untested, inspection recommended) (SH)
Washing machine (SH) "Asko" model W6444 untested, inspection recommended
57
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
Lounge suite, Cory, 3 + 2, red leather, inspection recommended (S)
Dining chair, whitewash timber (inspection recommended) (SH)
Lamps, qty 2, carved timber, cream shades (untested, inspection recommended) (SH)
Dresser (SH) 5 x drawers, white approx 85 x 43 x 96cm, inspection recommended
Bedside table (SH) 3 x drawers,white approx 45 x 40 x 60, inspection recommended
Bedside table (SH) 1 drawers, white with approx 47 x 35 x 62cm, inspection recommended
Hallway table, timber finish approximately 120 x 40 x 60 (Inspection recommended) (SH)
Hall table, timber, 2 drawer, turned knobs (inspection recommended) (SH)
Bedside, timber laminate, 3 drawer, metal handles (inspection recommended) (SH)
Filing cabinet (SH) "Elite built" 2 drawer, cream, untested, inspection recommended
Hallway table, curved top, timber (Inspection recommended) (SH)
1930's Victorian Dresser (SH) timber, 4 x drawers, beveled edged mirror, inspection
recommended
Dining suite 9 piece glass top stainless steel base, 8 x black leather chairs (Inspection
recommended) (SH)
Ceramic Vases (Sh) set of 3, tiger look, inspection recommended
Ceramic vase (SH) charcoal with artificial foilage, inspection recommended
Ceramic figurine qty 2 Crouching women in black (Inspection recommended) (SH)
Sofabed (SH) 3 seater, aqua/chequered fabric
Lounge chair (SH) 3 seater, white leather, marked arm, inspection recommended
Credenza (SH) timber top with charcoal base, 2 x sliding doors, 2 x shelves, approx 180 x 450 x
73
Water jugs, qty 2 urns, 3 pces, copper (inspection recommended) (SH)
Entry door pots (SH) Qty 2, black plastic with artificial greenery, inspection recommended( 1 x
broken branch)
Framed print (SH) building, inspection recommended
Coffee Ottoman, sack style (inspection recommended)(SH)
Treadmill (SH) "Cardiotech", inspection recommended, untested
Keller chaise chair (SH) black leather on metal base, inspection recommended
Bedside 1 drawer with undershelf chocolate laminate (Inspection recommended) (SH)
Bedsides 2 x timber veneer 2 drawer (Inspection recommended) (SH)
Dining table, timber, Zumbar, glass insert, 3 pces (inspection recommended) (SH)
Dining table, timber, stained walnut, 2000mm (L) (inspection recommended) (SH)
Dining table, timber, stained walnut, 1800mm (L) (inspection recommended) (SH)
Rug, shaggy 'A Slice of Heaven' 200 x 2190 cm black 40% wool 60 art silk plie (Untested,
Rug, 200 x 2190 cm caramel wool pile (Untested, inspection recommended) (SH)
Entertainment unit (Sh) 2 door , glass shelf, with timber, inspection recommended
Dining chair, light grey vinyl with chrome frame (Sold price per each, inspection recommended)
(SH)
Tub chair (SH) white leather, aged, inspection recommended
Chiffonier (SH) Mahogany, 1 drawer, 2 door, no key, inspection recommended
Chest of drawers (SH) 4 drawer, recycled timber, inspection recommended
China tea set, ceramic, pearl glaze, 12 pces, missing milk jug lid, sold as lot (inspection
recommended) (SH)
Coffee table (SH) rectangle, stainless steel base, grey marble top, inspection recommended
58
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2222a
2223
2224
Ceramic vases (SH) Qty 2, black with artificial twigs, inspection recommended
Vase (SH) beige/green speckled ceramic
Entertainment Unit (SH) 4 drawer, 2 door, mirrored black glass/timber, inspection recommended
Throw cushions (SH) Qty 4, black, inspection recommended
Vases (SH) Qty 2 white ceramic, inspection recommended
Mirror, timber framed approximately 47 x 65 cm (Inspection recommended) (SH)
Canvas print, Sydneys "The Bridge' (inspection recommended) (SH)
side/lamp tables (SH) Qty 2, beige stone look tops, metal bases, sold as lot, inspection
recommended
Canvas artwork (SH) beige pots, inspection recommended
Bar stools (SH) Qty 2, dark timber, black upholstery, sold as pair, inspection recommended
Plant stand (SH) stone look, inspection recommended
Coffee table (SH) cream travetine style base, clear glass rectangle top, inspection recommended
Vege drawer (SH) cane, metal frame, inspection recommended
Bedsides, qty 2, 1 drawer, white timber, metal bases, inspection recommended (S) (sold as lot)
Bedside, 4 drawer, white timber, inspection recommended (S)
Lantern, red metal, clear glass (untested, inspection recommended) (SH)
Coffee table, round wenge timber, grooved, inspection recommended (S)
Clock, 'Polaris' stained timber (untested, inspection recommended) (SH)
Print, large Buddha design (inspection recommended) (SH)
Medicine cabinet (SH) stained timber, mirrored front, inspection recommended
Framed print, children's fairy garden (inspection recommended) (SH)
Framed print, beach themed, gold colour frame (inspection recommended) (SH)
Bed frame, single, drop in slatted frame, white timber, inspection recommended (S)
Dining table timber charcoal LM-903, 160 x 90 x 78 cm (Sold price per each, inspection
recommended) (SH)
Butlers tray, chocolate timber, 2 piece, inspection recommended (S)
Paintings (SH) 2 "Ocean Shells" by Daleen Fourie (sold as pair)
Side table, qty 2, 2 tier, round chocolate timber, inspection recommended (S) (sold as lot)
Vase, brownish lustre finish, 34cm (inspection recommended) (SH)
Occasional chair, beech timber, black straps, inspection recommended (S)
Coffee table (SH) 4 drawer, dark solid timber, approx 1200 x 1200mm, inspection recommended
Canvas artwork, acrylic, red, white on black abstract (inspection recommended) (SH)
Ottoman, round, dark, silver buttons, inspection recommended (S)
Stools, qty 2, round black iron bases, black fabric tops, inspection recommended (S) (sold as lot)
Stools/ottomans, qty 3, weaved cane, inspection recommended (S)
Stools, qty 2, short woodcut, black cushions, inspection recommended (S) (sold as lot)
Chess board & pieces, Asian design, carved box (SH), inspection recommended
Hat boxes, qty 2, multi coloured, inspection recommended (S) (sold as lot)
Bar stools, qty 3, whitewash timber, inspection recommended (S) (sold as lot)
Console table, 1 drawer, black timber, inspection recommended (S)
Canvas print, 'Stepping Stones' (inspection recommended) (SH)
Filing cabinet (SH) "Elite Built" 2 drawer, grey metal, inspection recommended
Bedsides, qty 2, cube chocolate timber, floral cutouts, inspection recommended (S) (sold as lot)
Ornaments, qty 2, round chocolate timber on stands, inspection recommended (S) (sold as lot)
59
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
Chest, dark timber, oriental look, inspection recommended (S)
Outdoor setting, 9 piece, black metal, inspection recommended (S)
Lamp, chrome with crystal branches, untested, inspection recommended (S)
Bar stools, qty 2, black wicker, chrome bases, inspection recommended (S) (sold as lot)
Bedsides, qty 2, 3 drawer, mirrored, 1 x cracked drawer, inspection recommended (S) (sold as lot)
Paintings (SH) Qty 2 "Table Gathering" + "Family Lady" (sold as pair) inspection recommended
Chiffonier (SH) Mahogany, 1 drawer, 2 door, no keys, inspection recommended
Statue, plaque & thermostat, assorted pieces, sold as lot (untested, inspection recommended)
(SH)
Dining suite (SH) 5 piece, oval English oak, cream padded chairs, inspection recommended
Framed print, 'The First Cricket Match, Sydney Domain 1857' by Samuel T Gill (inspection
recommended) (SH)
Chiffonier (SH) Mahogany, 4 door, 1 drawer, (3 keys with storeman) inspection recommended
Vases (SH) Qty 2, ceramic green, inspection reccomended
Canvas print, coloured zebra (inspection recommended)
Canvas print, Buddha (inspection recommended)
Coffee table, 2 drawer, wenge timber, mirrored drawers, inspection recommended (S)
Entertainment unit, 2 door, 1 drawer, dark grey gloss, inspection recommended (S)
Mirror (SH) black studded leather look, cracked, inspection recommended
Drawer unit (SH) 4 drawer, timber, cane drawers, inspection recommended
Kitchen dresser (SH) 1 door, 1 drawer, yellow wood, inspection recommended
Canvas artwork (SH) gold abstract, silver frame, inspection recommended
Low line entertainment unit, 2 drawer timber laminate (Inspection recommended) (SH)
Plant stand (SH) cream metal, inspection recommended
Rubbish bin (SH) white metal, inspection recommended
TV stand (SH) white laminate, inspection recommended
Cube side table ( SH) white laminate, inspection recommended
Canvas artwork (SH) cream/beige, inspection recommended
Arcade machine (SH) "street fighter" zero 2, no key (unlocked) as is, untested, inspection
recommended
Arcade machine 'Aerosmith Revolution' with 2 guns (Untested, inspection recommended) (SH)
Coffee table, round black glass top, chrome frame, inspection recommended (S)
Occasional chairs, qty 2, walnut timber, geo pattern, white cushions, inspection recommended (S)
(sold as lot)
Canvas artwork (SH) grey abstract, inspection recommended
Dining suite (SH) 5 piece, frosted glass top, white, inspection recommended
Handbags, Qty 4 x branded "Kardashain & Kate Hill" various colours (SH) inspection
recommended
Mini table, grey PVC with cup holders, authenticity unknown, inspection recommended (S) (sold
per each)
Mini table, white pvc with cupholders (sold price per each)(inspection recommended)(S)
Canvas artwork, Audrey Hepburn, inspection recommended (S)
Bedframe, bunk bed, white 2 pac (inspection recommended) (SH)
Bar stool, brown vinyl, chrome frame (inspection recommended) (SH)
Timber vases, qty 2, grey carved wood, inspection recommended (S) (sold as lot)
60
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
Side table, round black glass top, chrome frame, inspection recommended (S)
Side table, round glass top, zig zag metal base, inspection recommended (S)
Lounge chair, Sippy, 3 seater, cream fabric, inspection recommended (S)
Market umbrella (Sh) cream coloured, inspection recommended, untested
Paintings (SH) Qty 4 assorted (sold as lot) inspection recommended
Bookcase, Zig zag, whitewash timber, inspection recommended (S) (sold per each)
Bookcase, Zig zag, whitewash timber, inspection recommended (S) (sold per each)
Bed frame queen black leather (Inspection recommended) (SH)
Paintings (SH) Qty 2 "Flowers" + "Posing Ladies" (sold as pair) inspection recommended
Clock, wall hung, pool theme (untested, inspection recommended) (SH)
Large green tinged glass vessel, with lid & tap (inspection recommended) (SH)
Acoustic guitar (Sh) "Martinez" glitter look, 3 strings only, untested, inspection recommended
Dining suite, 9 piece, black glass top, stainless legs, black upholstered chairs, inspection
recommended (S)
Desk letter box, timber, 2 door, single drawer (inspection recommended) (SH)
Framed print, Pears Soap, titled 'Bubbles' by JE Peters (inspection recommended) (SH)
Canvas print, electrified cat (inspection recommended)
Mattress, queen, blue design fabric (inspection recommended) (SH)
Ensemble bed (SH) king single, cream fabric, inspection recommended
Spin bike, Life Span model SP100 (untested, inspection recommended) (SH)
Kids piano & 2 x kids guitars (sold as lot), untested, inspection recommended
Mattress, queen, orthopedic, gold design fabric (inspection recommended) (SH)
Ensemble bed Queen twin pillow top, cream floral fabric, no castors (Inspection recommended)
(SH)
Mannequin, lady, headless, no stand (inspection recommended) (SH)
Lamps (SH) Qty 2, urn style brass, cream shades, untested, inspection recommended
Coffee table, timber, 2 drawer, metal handles (inspection recommended) (SH)
Bedframe, single, white & grey metal frame (inspection recommended) (SH)
Pedestal, timber, large, turned design (inspection recommended) (SH)
Outdoor setting, dining, 6 pce, blue steel (inspection recommended) (SH)
Wine cooler/picnic bag, beige fabric (inspection recommended) (SH)
Bedsides, qty 2, timber, single drawer, single door, sold as lot (inspection recommended) (SH)
Child's car seat, Mothers Choice (untested, inspection recommended) (SH)
Bed basket, cane, dark brown (inspection recommended) (SH)
Ornament, timber boat, small (inspection recommended) (SH)
Hall table, timber, single drawer, no mirror (inspection recommended) (SH)
Coffee table & side table, timber, decorative, sold as lot (inspection recommended) (SH)
Clock, wall hung, decorative, roman numerals (untested, inspection recommended) (SH)
Bed base (SH) king, 2 piece on casters, inspection recommended
Gazebo, foldable, blue fabric, in bag (untested, inspection recommended) (SH)
Dining Suite (SH) 7 piece, 1 x table, 6 x chairs, timber, glass centre, green fabric cushions,
Bed frame, queen, timber, stained (inspection recommended) (SH)
Record player, CD player, Teac, black (untested, inspection recommended) (SH)
Binoculars & boxed ultra sonic wave cleaner, sold as lot (untested, inspection recommended)
(SH)
61
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
Lamp, large green & gold marble sheen with square green shade, 72cm (H) (inspection
recommended) (SH)
Bed frame queen Japanese style black leather with cream mattress (Inspection recommended)
(SH)
Table centrepiece, very large Czech lead crystal (untested, inspection recommended) (SH)
Handbags, ladies, qty 4, sold as lot (inspection recommended) (SH)
Table lamp bases, qty 2, floral oriental influence, sold as lot (inspection recommended) (SH)
Entertainment Unit (Sh) 2 drawer, 2 x sliding doors, white/choc, laminate
Lamp, large octagonal gold base with cream & gold shade, 73cm (H) (inspection recommended)
(SH)
Coffee table round top metal base yellow 2 piece model 669CT (Sold price per each, inspection
recommended) (SH)
Artwork, 3 pieces, pool, photo frame & boys (SH), inspection recommended
Jug bowl & 8 x crystal glass, assorted pieces, untested, inspection recommended
Bowls 'Sisli' qty 2 per box, shallow, yellow white (These items are the subject of an insurance
claim, inspection recommended) (S)
Shoes, 2 pairs, runners (SH), inspection recommended
Coffee table (SH) rectangle, dark timber
Platters, qty 3, selection of large ceramic & other dishes, sold as lot (inspection recommended)
(SH)
Stool, timber, heavily carved (SH), inspection recommended
Bed frame, king, timber, wenge (inspection recommended) (SH)
Treadmill (SH) "Body fit" digital display elite, untested, inspection recommended
Low line entertainment unit, timber, 2 door, 2 shelf, ash (inspection recommended) (SH)
Chairs, Paolo, qty 3, cream/wenge, inspection recommended (S) (sold as lot)
Sewing machine, Vaotrio, in case (untested, inspection recommended) (SH)
Birdcage (SH) black metal, small, inspection recommended
Birdcage (SH) white metal, small, inspection recommended
Corner lounge suite 'Maura' 2 seater with chaise grey fabric (Inspection recommended) (S)
Baby car seat qty 2 (Sold as lot, untested, inspection recommended) (SH)
Rocking horse (SH) inspection recommended
Deck chair, slatted whitewash timber, (inspection recommended)(SH)
Birdcage (SH) white metal, large (sold price per each), inspection recommended
Birdcage (SH) small, white metal, inspection recommended
Guinea pig cages (SH) Qty 2, blue, sold as lot, inspection recommended
Bike helmets (SH) assorted sizes and colours, sold per each, inspection recommended
Dining suite, 5 piece, chocolate timber, inspection recommended (SH)
Cat tunnel (SH) 3 way, inspection recommended
Rat cage (SH) green, inspection recommended
Framed artwork (Sh) Qty 2, beige floral abstract, black timber frames, inspection recommended
Outdoor chairs, floral fabric design, white frame qty 6 (Sold as lot, inspection recommended) (SH)
62
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
Handbags, Qty 2 x branded Mishi, black, authenticity unknown, inspection recommended (SH)
Dining chairs, qty 4, turned timber lacquered, inspection recommended (SH) (sold as lot)
Chairs, timber frame with beige cushions qty 4 (Sold as lot, inspection recommended) (SH)
Dining chairs, qty 4, floral fabric, brown timber frame, inspection recommended (SH) (sold as lot)
Canvas print, Sunset palms (inspection recommended)
Rowing machine, China, digital display (untested, inspection recommended) (SH)
Candle holders, qty 2, wrought iron ladies lounging holding candles in hands, sold as lot
(inspection recommended) (SH)
Coffee table (SH) Oval, brown timber, glass top, inspection recommended
Candle holder (SH) black metal, 5 arm, inspection recommended
Canvas prints, 2 pces, candles & starfish, sold as lot (inspection recommended) (SH)
Prints, qty 2, horse face finishes, glass framed, sold as lot (inspection recommended) (SH)
High bar table (SH) round top, metal base, inspection recommended
Pet carry cage (SH) blue/white, inspection recommended
Handbags, qty 6, black, assorted designs (inspection recommended)
Fireplace screen 3 pce, timber, decorative (inspection recommended) (SH)
Canvas print, seagull flying (inspection recommended)
Lounge suite (SH) 2 + 2, denim style fabric some marks, inspection recommended
Canvas painting, purple girls (inspection recommended)
Bedside, timber, 2 drawer, metal handles (inspection recommended) (SH)
Statue, dog, plaster, black (inspection recommended) (SH)
Wall clock (SH) abstract with Roman numerals, inspection recommended
Drawer unit, timber, 3 drawer, black, sold per each (inspection recommended) (SH)
Print, medium, two girls (inspection recommended) (SH)
Chess set, 4 games, glass (inspection recommended) (SH)
Drawer unit, timber, 4 drawer, black, sold per each (inspection recommended) (SH)
Table (SH) collapsible stained timber table, as is, untested, inspection recommended
Display stand, solid timber, 5 tier, hand carved, untested, inspection recommended (SH)
Floor lamp, round cane, cream inner, untested, inspection recommended (S)
Mirror, black frame, some damage, inspection recommended (S)
Canvas print, old holdens (inspection recommended)
Side table, chocolate timber,metal trim, inspection recommended (S)
Mobile drawers, Frozen print, 3 drawer (inspection recommended) (SH)
Bedside, Superman, 3 drawer (inspection recommended) (SH)
Ottoman (SH) gold coloured fabric, stainless base, inspection re
Cane basket, 35cm (W) 35cm (H) (inspection recommended) (SH)
Decorative stand, whitewash timber, cane reeds, inspection recommended (S)
Lounge chair, 2.5 seater, grey fabric, inspection recommended (S)
Handbags, 3 x branded various colours (SH) inspection recommended
Canvas print, beach island (inspection recommended)
Sofa bed 2 seater grey fabric rolled arms (Inspection recommended) (SH)
Handbags (SH) Qty 5 assorted, inspection recommended
Floor lamps, qty 2, white, untested, inspection recommended (S) (sold as lot)
Bookcase (SH) 4 tier, beech laminate, approx 1350 x 900mm, inspection recommended
Framed memorabilia (SH) 2007 Gold Coast Titans, inspection recommended
63
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
Canvas print (SH) "beach front", inspection recommended
Bed frame, Queen, Manchurian Ash, 4 boxes per set, sold per set, inspection recommended (S)
Small coffee table (SH) timber with magazine holder, inspection recommended
Artwork (SH) Luna Park canvas print and 2 x Egyptian style prints (sold as lot) inspection
recommended
Ironing board (Sh) beech timber frame, beige fabric, inspection recommended
Headboard back item HB1, inspection recommended (SH)
Outdoor chairs (SH) timber framed, blue fabric, Qty 2, sold as lot, inspection recommended
Desk, 2 drawers, chocolate, metal stand, glass not included, inspection recommended (SH)
Headboard, front and back, 2 boxes, item HB8, inspection recommended (SH)
Desk, 3 drawers, black metal stand, inspection recommended (SH)
Table bases - assorted sizes and styles, Qty x 5, sold as lot, inspection recommended (SH)
Low line entertainment unit, timber, 6 drawer, silver handles, inspection recommended (SH)
Bookend, pair of marble, (inspection recommended)(SH)
Sliding roof awning (SH) stone colour, approx 240 x 300cm, untested, inspection recommended
Display cabinet, glass sides & shelf, metal frame, sold per each (this item is the subject of an
insurance claim) (inspection recommended) (SH)
Office chair, black vinyl, on casters, inspection recommended (SH)
Mannequin (SH) ladies full body (no head) on stands, sold per each, inspection recommended
Mannequins (SH) ladies torso, sold per each, inspection recommended
Dining suite, 5 pce, timber, beige coverings (inspection recommended) (SH)
Gunsafe, Jorgenson, heavy duty, combination open, no code, inspection recommended (SH)
Table (SH) square, white metal, inspection recommended
Wall decorations (SH) wheel and anchor mirrors (sold as lot) inspection recommended
Canvas artwork (SH) Qty 2 assorted
Assorted chairs, rugs, lamps, lampshades (stillage not included) sold as lot, inspection
recommended (SH)
Curtains and sears - large Qty to pallet, sold as lot, inspection recommended (SH)
Assorted curtains, privacy curtains, curtain hooks, brackets etc large qty to pallet, sold as lot,
inspection recommended (SH)
Seat, solid timber, carved tree trunk, untested, inspection recommended (SH) (sold as lot)
Hall table, metal base, glass top (inspection recommended) (SH)
Buddha statues, qty 2, with vases & picture frame, sold as lot (inspection recommended) (SH)
Side tables, qty 2, whitewash timber, sold as lot (inspection recommended) (SH)
Artwork 'Asian' themed qty 4 approximately 40 x 50 cm (Sold as lot, inspection recommended)
(SH)
Bed frame, king single, whitewash timber (inspection recommended) (SH)
Dining suite, 7 piece, wicker base, black timber/glass top, 6 x pala wicker chairs, inspection
recommended (S)
Wall plaques, qty 2, swirls, sold as lot (inspection recommended) (SH)
Kids pool table, with accessories (inspection recommended) (SH)
Pantry cupboard, 1 door, white laminate, perspex front (inspection recommended) (SH)
Hall stand, 1 drawer, 1 door, stained timber, with mirror (inspection recommended) (SH)
Clocks, qty 2, assorted with fish themed platter (untested, inspection recommended) (SH)
Coffee table, round, stained timber (inspection recommended) (SH)
64
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
Dining chairs, qty 6, heavily carved, white/chocolate wash, blue upholstery (inspection
recommended) (SH)
Rocking chair, green timber (inspection recommended) (SH)
Vases, qty 2, brass, sold as lot (inspection recommended) (SH)
Desk, 2 drawer, 3 door, whitewash timber (inspection recommended) (SH)
Egg chair, white wicker on metal stand, inspection recommended (S)
Vibration machine 'Virbro Training' (Untested, inspection recommended) (SH)
Pedestal lamp, timber, white shade (untested, inspection recommended) (SH)
Coffee table, timber, turned legs (inspection recommended) (SH)
Coffee table, slatted timber, whitewash, french themed inlay top (inspection recommended) (SH)
Mirror, wall hung, timber frame (inspection recommended) (SH)
Lounge, 3 seater, beige fabric (inspection recommended) (SH)
Desk frame - Stainless steel, sold per each, inspection recommended (S)
Display cabinet, timber, 3 glass doors, glass shelves (inspection recommended) (SH)
Recliner lounge, 2 seater, leather, mocha (inspection recommended) (SH)
Lounge chair (SH) 3 seater, gold fabric, some marks, inspection recommended
Mobility aid, 4 wheel, aqua blue, (untested, inspection recommended)(SH)
Baby bouncer, Whinnie the Pooh, (inspection recommended)(SH)
Bench seat, 2 man, slatted white timber (inspection recommended) (SH)
Chest, blue approximately 77 x 45 x 30 cm key not included (Untested, inspection recommended)
(SH)
Curtains and rails - large Qty to stillage (stillage not included) sold as lot, inspection recommended
(SH)
Barbecue, 6 burner, solid plate, with trolley, (inspection recommended)(S)
Projector screen, 1.9 metre wide on tripod stand (Untested, inspection recommended) (SH)
Baby bike trailer (SH) "Crane" untested, inspection recommended
Lamps, box of 2, black/silver oval ceramic, no shades, (note to buyer:plug removed) untested,
inspection recommended (S) (sold per box)
Office chair, high back, mesh, black on castors (Sold price per each, inspection recommended)
(SH)
Water urn, brown ceramic with tap (Untested, inspection recommended) (SH)
Tripod stands, 2 x chrome & black metal extensions 7 x (Inspection recommended) (SH)
Office chair (SH) cream timber, swivel with arms (sold price per each, inspection recommended
Handbags, 2 x branded Louis Vuiton, various colours, untested, inspection recommended (SH)
Bar stools, qty 2, choc timber tops, black metal frames, inspection recommended (SH)
Side table, white timber, (inspection recommended)(SH)
Rowing machine, seated type - 10 x weights (Untested, inspection) (SH)
65
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
Appliances, Electronics, Sporting & Leisure Online Auction
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
Memorabilia, Phil Collins signed photo, sticks, bag, tickets, face value CD, First & Final Farewell
tours, authenticity unknown, untested, inspection recommended (SH)
Memorabilia, Love & Basketball poster signed by Dennis Haysbert, authenticity unknown,
untested, inspection recommended (SH)
Memorabilia, Kenny G Live T-shirt 1993 signed, authenticity unknown, untested, inspection
recommended (SH)
Memorabilia, Belinda Carlisle record signed & photo, authenticity unknown, untested, inspection
recommended (SH)
Memorabilia, U2 Joshua Tree poster in frame, signed by band, authenticity unknown, untested,
Memorabilia, A View to Kill James Bond poster & photos signed by leading lady, authenticity
unknown, untested, inspection recommended (SH)
Memorabilia, 2000 Olympics Australian Swimming Team with ticket, authenticity unknown,
Memorabilia, Signed photos of Alec Baldwin & Meg Ryan, authenticity unknown, untested,
Memorabilia, The Eagles 2004 Australian Tour frame including T shirt, bag, book & tickets,
authenticity unknown, untested, inspection recommended (SH)
Memorabilia, Alice Cooper Lace & Whisky vinyl & signed booklet, authenticity unknown, untested,
Memorabilia, The Big Chill photograph signed by leading man, authenticity unknown, untested,
Memorabilia, The Police Synchronicity vinyl, red frame, authenticity unknown, untested, inspection
recommended (SH)
Memorabilia, Peter Brock signed photo & car photos, authenticity unknown, untested, inspection
recommended (SH)
Memorabilia, Barbara Streisand Timeless Live in Concert tour books, authenticity unknown,
Memorabilia, Streisand Tour 2006 poster in frame, authenticity unknown, untested, inspection
recommended (SH)
Memorabilia, Chris Isaak signed T-shirt with heart shaped world, authenticity unknown, untested,
66
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1033
1034
1035
1036
1036A
1036B
1036C
1037
1038
1039
1040
1041
Memorabilia, Footrot Flats, qty 2, small frames, authenticity unknown, untested, inspection
recommended (SH) (sold as lot)
Memorabilia, Kiss signed T shirt with tickets, photos & back stage pass in frame, authenticity
Memorabilia, Masters of the Universe poster signed by Dolai Lungren, authenticity unknown,
Memorabilia, My Stepmother Is An Alien poster signed by Dan Ackroyd, authenticity unknown,
Memorabilia, Spaceballs poster signed by Mel Brooks, authenticity unknown, untested, inspection
recommended (SH)
Memorabilia, The Pianist poster, signed by Adriane Brody in frame, authenticity unknown,
Memorabilia, Chicago Tour T shirt with tickets & photos in frame, authenticity unknown, untested,
Memorabilia, Leo Sayer signed record, 'World Radio' including ticket, framed, authenticity
Memorabilia, Cindy Williams signed with photo, model '58 Impala from American Graffiti,
authenticity unknown, untested, inspection recommended (SH)
Memorabilia, Doobie Brothers signed Drum Head with CD, T shirt in frame, authenticity unknown,
Memorabilia, Elton John signed photo & recover cover, authenticity unknown, untested, inspection
recommended (SH)
Memorabilia, Walt Disney Ltd Edition, Welcome to Australia Sericel, authenticity unknown,
Memorabilia, Terminator model with poster & T2 DVD, authenticity unknown, untested, inspection
recommended (SH)
Spectacle cases, qty in blue basket (Untested, inspection recommended) (SH) (Sold as lot)
Sound System, Sony Dolby digital 5 speaker surround extended definition, s/h inspection
recommended.
Painting landscape by Australian artist Peter Hill 54 x 65 cm (Inspection recommended) (SH)
Painting, C E G Beveridge oil painting, Still Life, Study of Flowers, approx 425 x 485mm,
inspection recommended (SH) (Asset 3)
Framed artwork, gold tone, teal vase, poor condition (inspection recommended) (SH)
Painting, Thomas Pell oil painting, Still Life, Study of Flowers, approx 1140 x 890mm, untested,
inspection recommended (SH) (Asset 4)
Framed memorabilia 'Suzie O'Neil' signed (Authenticity unknown, inspection recommended) (SH)
Framed memorabilia 'The Boy From Biloela' by D'arcy Doyle limited edition signed 1241 of 1500
with authenticity certificate (Inspection recommended) (SH)
Framed memorabilia 'Dawn Fraser' signed (Authenticity unknown, inspection recommended) (SH)
Car baby, AFC, 308D, untested, inspection recommended (S) (sold per each)
4x Headphones labeled Beats by dr dre solo HD & 7x small headphones labeled Beats by dr dre
with control talk, untested, inspection recommended (SH) (sold as lot)
Camping lanterns, LED, sold per each, inspection recommended
Collectable signed jersey, ASSC, glass framed (inspection recommended) (SH)
Rings, stamped 925 quantity 3 assorted suspended created stones assorted sizes (Authenticity
unknown, inspection recommended) (SH)
67
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1042
1043
Talla Zeta Mid calf boot Colour Brown leather, Kenia Moka Full side zip 4cm heel Tassel around
top Size 37 Slim fit RRP $295 Online inspection only (S)
Dansi, Anteflex Maroon Mid calf boot Model 35079 Colour Brown suede Full side zip 6cm heel
Size 38 Slim fit RRP $330 Online inspection only (S) Dansi shoes are produced by Elche shoe
company, who are located in Spain.
1044
Dansi, Anteflex Maroon Mid calf boot Model 35079 Colour Brown suede Full side zip 6cm heel
Size 38 Slim fit RRP $330 Online inspection only (S) Dansi shoes are produced by Elche shoe
company, who are located in Spain.
1045
Malibu Alligatore Limoges Mid calf boot Colour Brown leather Full side zip 3.5cm heel Size 36
Slim fit RRP $290 Online inspection only (S)
Malibu Alligatore Limoges Mid calf boot Colour Brown leather Full side zip 3.5cm heel Size 36
Slim fit RRP $290 Online inspection only (S)
Netti Minimax Helmet, Pink Flower, size XXS, Full wrap around infant protection, 100% micro
bonded shell, 4 large cooling vents, Easily adjustable secure fit headlock, Velour lined for comfort,
RRP$39.95, inspection recommended
1046
1047
1048
Netti Minimax Helmet, Sprinkles, size XS, Full wrap around infant protection, 100% micro bonded
shell, 4 large cooling vents, Easily adjustable secure fit headlock, Velour lined for comfort,
1049
Netti Minimax Helmet, Purple Butterfly, size XS, Full wrap around infant protection, 100% micro
bonded shell, 4 large cooling vents, Easily adjustable secure fit headlock, Velour lined for comfort,
1050
Netti Pilot Helmet, Monkeys, size XS, 100% micro bonded shell, 6 large cooling vents, Easily
adjustable secure fit headlock, DL soft touch head lock, Integrated visor shape, inspection
recommended
1051
Netti Pilot Helmet, Blue Flame, size S, 100% micro bonded shell, 6 large cooling vents, Easily
adjustable secure fit headlock, DL soft touch head lock, Integrated visor shape, RRP$39.95,
1052
Netti Lightning Helmet, white/cyan, size S-M, The Netti Lightning Helmet has a Secure dial
headlock with adjustable straps for the ideal fit and it is made of a 100% micro bonded shell to
offer optimum cooling there are 13 core airflow vents including 2 rear vortex vents, RRP$39.95,
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
Soft sided pool, 'Clark Rubber' 162 x 162 x 37cm (untested, inspection recommended) (S)
Blow up boat, 'Fun' 192 x 115cm (untested, inspection recommended) (S)
Skateboard, 'Maddog' blue (untested, inspection recommended) (S)
Hydration back pack, 1.5 litre bladder, Redline (untested, inspection recommended) (SH)
Car DVD portable player, Worldtech (SH), untested, inspection recommended
CD player amp & cassette deck, Sanyo (untested, inspection recommended) (SH)
Motor bike helmet 'Kiwi K20' red (Untested, inspection recommended) (SH)
Motorbike helmet, Box, coloured design, in bag (untested, inspection recommended) (SH)
Kids tool kit, "Built", 66 pieces, with kids wheelbarrow, sold as lot
Cricket batting pad, size youth, sold per each, inspection recommended (SH)
Map espresso capsules decaffeinated 10 x 8g =80g net 1 lot of 38 packs Sold as Lot (Inspection
recommended)
Hanging Print, Farmers/Landscape, 92 X 60cm, as is, inspection recommended, sold price per
each.
Skateboard - "Maddog" Flyer Jnr, 22.5" As is, Inspection Recommended.
1064
1065
68
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1066
1067
1068
1070
1071
1072
1073
1074
1075
1076
1077
1079
1080
1081
1083
1084
1085
1088
1089
1090
1092
1093
1094
1094A
1094B
1094D
1094E
Laundry trolley, "Hills Panier", 78 x 45 x 92mm, (inspection recommended)(S)
Conga drum, Toca model 2300N, light woodgrain, 72cm (H) approx (inspection recommended)
(S)
Painting, tree & house on a hill 80 x 70xm signed T.Phong, inspection recommended
Compression wear Youth Long Sleeve "Atlas" size: M as is (sold price per each, inspection
recommended)
Compression Wear youth short sleeve 'Atlas' size L, as is (Sold price per each, inspection
recommended) (SH)
Compression wear Tight "Atlas" size: S as is (sold price per each, inspection recommended)
Skinz, compression top and pants, model Z400 (RRP $199) black, size XXL, sold per each,
Skinz, compression top and pants, model Z400 (RRP $199) black, size M, sold per each,
Skinz, compression top and pants, model Z400 (RRP $199) black, size L, sold per each,
Compression wear Youth Long Sleeve "Atlas" size: L as is (sold price per each, inspection
recommended)
Compression Wear youth short sleeve 'Atlas' size XL, as is (Sold price per each, inspection
recommended) (SH)
Compression Short Youth "Atlas" size: L as is (sold price per each, inspection recommended)
Compression ware Youth Long Sleeve "Atlas" size: S as is (sold price per each, inspection
recommended)
Compression wear Youth Long Sleeve "Atlas" size: XL as is (sold price per each, inspection
recommended)
Compression wear Women's Crop Top "Atlas" size: S as is (sold price per each, inspection
recommended)
Compression wear Short Sleve "Atlas" size: M as is (sold price per each, inspection
recommended)
Compression wear Short Sleve "Atlas" size: L as is (sold price per each, inspection
recommended)
Compression wear Long Sleeve "Atlas" size: S as is (sold price per each, inspection
recommended)
Compression wear Women's Crop Top "Atlas" size: L as is (sold price per each, inspection
recommended)
Compression wear Women's Crop Top "Atlas" size: M as is (sold price per each, inspection
recommended)
Compression wear Youth Short "Atlas" size: S as is (sold price per each, inspection
recommended)
Memorabilia, Paul McCartney record, No More Lonely Nights, authenticity unknown, untested,
Memorabilia, The Long trailer Ext play record with photos, authenticity unknown, untested,
Creme brulee set (SH) as is, untested, inspection recommended
Sheet set of dri-glo, taupe colour, double bed in original packing (inspection recommended) (SH)
Ceramic fondue set (SH) as is, untested, inspection recommended
Revolving wire free, battery operated (untested, inspection recommended) (SH)
69
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1109
1110
1111
1112
1112A
1113
1114
1115
1116
1118
1119
1120
1121
1123
1125
1126
1126A
1126B
1127
1128
1129
1130
1131
1132
1133
TV, 'AWA' model no CM-P42LC1, 106cm, plasma display (remote with storeman) (untested,
TV, Palsonic 43" plasma, mod # PDP4310HD, cracked screen, inspection recommended (SH)
Purse (SH) branded "Louis Vuitton" white/multicoloured, inspection recommended
Handbag (SH) branded "Louis Vuitton" choc, inspection recommended
Handbag (SH) branded "Prada" black, inspection recommended
Boxing gloves, 2 pairs & bag, box of assorted pieces (inspection recommended) (SH)
Brother, MFC-J415W (untested, inspection recommended) (SH)
Durable Glassware - 18pce set "MORGANWARE" sold per set, inspection recommmended
Skis, stocks & boots, Swiss Maxx (untested, inspection recommended) (SH)
Mirror (SH) as is, inspection recommended
Surfboard, Pocket Rocket, 6' 2", fibreglass (untested, inspection recommended) (SH)
Decorative photo frame, 97cm x 54cm, as is, (sold price per each)(inspection recommended)
Acoustic guitar, Legend, steel strings (untested, inspection recommended) (SH)
Vase, dark coloured stone, H30cm, as is, (sold price per each)(inspection recommended)
Wave Ski, Blue "Kracka" (SH), inspection recommended
Speakers, qty 2, 'Magnat' Vintage 550 (untested, inspection recommended) (SH)
Handbag, ladies branded 'Fendi' colour black/gold (Authenticity unknown, inspection
recommended) (SH)
Handy stand mixer, Breville, untested, inspection recommended
Glass 4pcs - "Bormioli Rocco" Champange, Inspection Recommended.
6 Hi-Ball Tumblers - "RONA" 350ml European Glass, Inspection Recommended.
Chocolate Fondue Set - "MORGANWARE" ceramic pot with candles & forks. As is, Inspection
Recommended.
Non Stick Grill Pan - "MORGANWARE" 24cm. Sold per each. As is, Inspection Recommended.
Non Stick Grill Pan - "MORGANWARE" 24cm. Sold per each. As is, Inspection Recommended.
Non Stick Paella Pan - "MORGANWARE" 34cm. Sold per each. As is, Inspection Recommended.
Kitchen utensils, assorted qty, sold per each pack, inspection recommended
Non Stick Paella Pan - "MORGANWARE" 34cm. Sold per each. As is, Inspection Recommended.
NRMA aluminium water bottles, blue, sold per each, inspection recommended
Protective gloves, bag of, inspection recommended
Pram with matching umbrella 'Kiddy Wheels' colour blue (As is, untested, inspection
recommended) (SH)
Bike, kids 'Roadmaster' Radicool with training wheels colour red (As is, untested, inspection
recommended) (SH)
Ceramic Cruet Set - "MORGANWARE" oil, vinegar, salt & pepper. as is, inspection recommended.
Potato press, 'Three Hats' inspection recommended
Heavy Duty Colander - "Morganware", Blue, sold per each, as is, inspection recommended.
Shower curtains, box of 6, Haven PVC, purple, approx 180 x 180cm with rings, inspection
recommended (SH) (sold per box)
NRMA aluminium water bottles, blue, sold per each, inspection recommended
Ukulele, Kohala Soprano Uke, model KUZIZ, brown (RRP $70) (untested, inspection
recommended) (S)
70
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1134
Luminess Airbrush DIY Tanning Kit Includes: 1 x Airbrush Tanning System Airbrush system 1.5m
240v AC power cord 2 x medium tanning solution bottles Full instructions & DVD Patent storage
bag Inspection recommended
1135
1136
Spray tanning system (SH) sunless tan, model HVLP 700, untested
COCOCHOC capsules by Map 10 x 15g=150g net per pack 1 Lot of 43 packs Sold as Lot
(Inspection recommended)
Diner set, 16 piece 'Wiltshire May' design, as is (Sold price per each, inspection recommended)
(SH)
Diner set, 12 piece 'Wiltshire Mosaic' design, as is (Sold price per each, inspection recommended)
(SH)
Latte perfecto Map coffee perfectly frothed milk ready in 80 seconds heating & frothing x 6 in a
box
Electric guitar & amp, Archer (untested, inspection recommended) (SH)
Binding machine, GBC CombBind C150 Pro binding machine Ibimatic (Untested, inspection
recommended) (SH)
Paper trimmer, MAPED Expert model G3620 guillotine (Untested, inspection recommended) (SH)
Work boots 'Woodlands' steel cap (As is, untested, inspection recommended) (SH)
Workstation tower HP XW 4400, HDD is removed, DDR2 800, 3 Gb RAM, dual DVI graphics card
with DVI to VGA adaptor, on-board RAID, dual core CPU, I x DVD burner with lightscribe
technology, 1 x DVD player (Untested, inspection recommended) (SH)
1137
1138
1139
1140
1141
1142
1143
1144
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
USB turntable (SH) "fission" as is, untested, inspection recommended
Stereo turntable with cassette deck (SH) as is, untested, inspection recommended
Computer system comprising 'HP' VK191AV 'HP Pro 3000 SFF' tower, no hard drive and 'Dell'
keyboard, no cabling (Untested, inspection recommended) (SH)
Computer platforms & laptop stands, assorted, plastic, untested, inspection recommended (SH)
(sold as lot)
Luminess Airbrush DIY Tanning Kit Includes: 1 x Airbrush Tanning System Airbrush system 1.5m
240v AC power cord 2 x medium tanning solution bottles Full instructions & DVD Patent storage
bag Inspection recommended
Ceiling fan, 'air Flow' reversible, all seasons, aluminium blades, light adaptable, 1200 mm in box
(Untested, inspection recommended) (SH)
Stereo hi-fi turntable DJ-1600B (SH) as is, untested, inspection recommended
Video Monitor, qty 2, "Sony" PVM, 14N6A, as is, (untested, inspection recommended)(SH)
Drop lights 'Kvintett' white quantity 2 (Sold as lot, inspection recommended) (SH)
Computer monitor, Samsung SA450, 22", untested, inspection recommended (SH)
Computer tower with 'Asus' components & monitor 'Sduvn' 19" & keyboard (As is, untested,
Kettle, 'Elvas' 2 litre, sold per each (untested, inspection recommended)
7pcs Kinfe Block Set - "MORGANWARE" Ergonomic comfortable rubber & ABS handle, Sold per
set. Inspection recommended.
7pcs Kinfe Block Set - "MORGANWARE" Ergonomic comfortable rubber & ABS handle, Sold per
set. Inspection recommended.
Juicer 'Bullet Express' The Amazing 8 minute meal machine (Untested, inspection recommended)
(SH)
71
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1163
1164
1165
1166
1167
1168
1169
1170
1171
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1197A
1198
1199
1200
Cross cut shredder, 'Fellows DS-1' CRC 30108 , security level P-4 with SafeSense technology
and 18 litre waste basket with pedal bin (Untested, inspection recommended) (SH)
Computer monitor, Samsung S24B300, 22", untested, inspection recommended (SH)
Monitor, 'HP' 1502 (untested, inspection recommended) (SH)
Telescope (SH) "Tasco" 30 x 90, inspection recommended
Video's, large box of assorted (untested, inspection recommended) (SH)
Super clip, qty 6, Deli, sold as lot (untested, inspection recommended)
Camping lanterns, LED, sold per each, inspection recommended
Light packs, qty 3, 12V dimmable, sold as lot (untested, inspection recommended) (SH)
Cleaning latex gloves, large qty in bag, sold as lot (inspection recommended)
Large planter brackets, small box of (inspection recommended) (SH)
Blinds, qty of assorted, sold as lot (inspection recommended) (SH)
Dip bowl "Salt & Pepper" pinata design, sold per box of 4, inspection recommended
TV, Samsung model LA4OR71BD, with remote (untested, inspection recommended) (SH)
Chair mat for carpets (inspection recommended) (SH)
Dell 22" monitor screen, black, untested, inspection recommended (SH)
Dell 24"" monitor screen, silver/black, untested, inspection recommended (SH)
Computer system including Dell tower, Samsung 22" monitor, keyboard & mouse, untested,
Computer system including Dell Tower, Dell 22" monitor, keyboard & mouse, untested, inspection
recommended (SH)
recommended (SH)
recommended (SH)
recommended (SH)
recommended (SH)
Speakers, pair, twin subwoofers (untested, inspection recommended) (SH)
NEC network rack, model CHS2U, qty 2, untested, inspection recommended (SH) (sold as lot)
Fishing reels, tub of assorted pieces, sold as lot (untested, inspection recommended) (SH)
Boat rod, overhead, 2 pce (untested, inspection recommended) (SH)
Fishing rods (SH) assorted sizes and styles, assorted spinner and Alvey reels, sold as lot,
Fishing rods (SH) Qty 2 assorted, inspection recommended
Bike, BMX 'Aspire' plack (untested, inspection recommended) (SH)
Mountain bike (SH) "Gitane" Rocks T4 with accessories black/red, untested
Bike, Dunlop X-treme, dual shock, 21 speed (untested, inspection recommended) (SH)
Watercolour painting, 'Expression of Rose, gold frame, (inspection recommended) (SH)
Bike, men's 'Shogun' trail breaker, 18 speed (untested, inspection recommended) (SH)
Bike, men's Southern Star Kodiac, 18 speed (untested, inspection recommended) (SH)
Bike, 21 speed, no brand name (untested, inspection recommended) (SH)
72
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1220A
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
Bike, ladies, 'Cyclops' maximal, 15 speed, purple (untested, inspection recommended) (SH)
Bike, 'Southern Star' NR20, dual shock, 7 speed (untested, inspection recommended) (SH)
Razor scooter, E3000, (untested, inspection recommended)(SH)
Trike, green machine, 3 wheel, (untested, inspection recommended)(SH)
Suitcase, 'Samsonite', green (inspection recommended) (SH)
Red metal tool boxes, TB-100 with handle, qty 3, untested, inspection recommended (SH) (sold
as lot)
Assorted Cabac rackmount cord minders, qty 12, untested, inspection recommended (SH) (sold
as lot)
Antec externa HD, qty 2, no charger, untested, inspection recommended (SH) (sold as lot)
Speaker phone, Clearone Chat 160 group speaker/phone, no charger, untested, inspection
recommended (SH)
Data cartridges, qty 5, TDK Ultrium 4 & IBM, pack of 10 RSA Secur 10 units, untested, inspection
Computer speakers, box of assorted, untested, inspection recommended (SH) (sold as lot)
Keyboards, box of assorted, untested, inspection recommended (SH) (sold as lot)
HP thin client, no charger, as is, untested, inspection recommended (SH)
HP thin client computer system with charger, qty 3, untested, inspection recommended (SH) (sold
per each, must take all)
Mice for computer, box of assorted, untested, inspection recommended (SH) (sold as lot)
Power cables, box of assorted, untested, inspection recommended (SH) (sold as lot)
Video & data cables, box of assorted, untested, inspection recommended (SH) (sold as lot)
Chargers, audio, video & data cables, box of assorted, untested, inspection recommended (SH)
(sold as lot)
Power supplies & chargers, box of assorted, untested, inspection recommended (SH) (sold as lot)
Office phones, NEC, silver face, Dterm series i, qty 67, untested, inspection recommended (SH)
(sold per each, must take all)
Office phones, NEC, black face DT300 series, qty 15, untested, inspection recommended (SH)
(sold per each, must take all)
Office equipment including Mitel 3000 base, staple, calculator, untested, inspection recommended
(SH) (sold as lot)
Mailing machines, box of 2, 1 x franking, 1 x folding, untested, inspection recommended (SH)
(sold as lot)
Printing Fuji Xerox docuprint, P255 D series in box, untested, inspection recommended (SH)
Multi function printer, Samsung Xpress, SCX-3405FW, WiFi enabled, in box, untested, inspection
recommended (SH)
Polycom soundstation 2, full duplex conference phone, untested, inspection recommended (SH)
Surfboard, Sole Life, had repairs, tri fin (untested, inspection recommended) (SH)
Paddle Board, 8ft 11, 22 5/8"x3 1/2" board size, triple fin, white & blue colour, no grip deck,
inspection recommended (S)
Active subwoofer, 'Pro Lab' (untested, inspection recommended) (SH)
Crystal glasses (SH) "Edinburgh" Qty 4 (sold as lot) inspection recommended
Jam hub (SH) 5 player studio, untested, inspection recommended
Acer Aspire E1-572 laptop, Intel 13, 4gb ram, 500gb HDD, Windows 8 with charger in case,
Jagermiester, 0.7L bottle (as is, inspection recommended) (SH)
73
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1232A
1234
1235
1236
1238
1239
1240
1241
1242
1243
1244
1245
1245A
1246
1248
1249
1250
1251
1252
1253
1254
1255
1256
1258
1259
1261
1263
1263A
1263B
1263C
1265
1266
1266A
1267
1268
Vase, large bottle shaped, 62cm (H) inspection recommended
Toys, qty 3, Meccano, Max Steel & Fire Station Block Tech set, all unopened (Untested,
inspection recommended) (SH) (Sold as lot)
Backgammon game (SH) including travel case, inspection recommended
Boule, lawn bowling ball, in case & measuring string & 2 jack balls (inspection recommended)
(SH)
Ornamental dagger (SH) on wall mount, inspection recommended
Wine cask barrel, wooden design with stand, tapped, made for wine casks, as is, inspection
recommended (SH)
Sherry glasses (SH) "Dunklings" Qty 4 (sold as lot) inspection recommended
Silverware cutlery set, stamped EPNS A1 'Rodd', serving spoon & dessert forks/spoons (untested,
Crystal glasses, set of 6, large wine (untested, inspection recommended) (SH)
Sword, spanish style (inspection recommended) (SH)
Sword, Indian style (inspection recommended) (SH)
Microscope kit (SH) 'Micro-Science" as is, untested, inspection recommended
Oroton bag, tan leather with additional alternate woven chain handle & original Oroton dust cover
(Authenticity unknown, inspection recommended) (SH)
Laptop, HP Pavilion dv6 with charger, untested, inspection recommended (SH)
Money box, porcelain teddy bear aviator in plane & Disney 101 dalmatian porcelain photo frame
(untested, inspection recommended) (SH)
Timber carvings, pair of Balinese fisherman (inspection recommended) (SH)
Coffee set, gold lustre coffee pot, sugar & jug with qty 3 duos & extra cup (inspection
recommended) (SH)
Trinket boxes, qty 2, chintz floral ceramic lidded egg & lidded heart stamped K412 (untested,
Papua New Guinea blue butterfly under dome (inspection recommended) (SH)
Dolls, qty 2, porcelain harlequin, shelf sitting (untested, inspection recommended) (SH)
Bed warmer (SH) as is, inspection recommended
Wine, assorted, pino grigio "Gregoris" Qty 2 + sauvignon blanc "Beach Head" Qty 2 + chardonnay
"Gemstone" qty 2, sold price per each must take 6
Figurine, crystal gazing ball (untested, inspection recommended) (SH)
TV LED 'Skywatch' 19" can use as monitor (As is, untested, inspection recommended) (SH)
Cozy Wrap, easy to tie baby wrap (inspection recommended) (SH)
Handbag (SH) branded "Louis Vuitton" choc/beige, inspection recommended
Handbag (SH) branded "Louis Vuitton" choc/beige, inspection recommended
Evening bags x 2 black sequin satin & velvet (Inspection recommended) (SH)
Laptop, HP Probook 4520S without charger, untested, inspection recommended (SH)
Laptop, HP Probook 4530S with charger, untested, inspection recommended (SH)
Notebook, Samsung 15.6" R540 Intel Core i3-370m 2.4Ghz, Ram 4GB with power adaptor,
booklets & laptop bag (Untested, inspection recommended) (SH)
HP 15-D001AU laptop, 500gb HHD, 4GB ram, Windows 8 with charger & bag, locked password,
James Bond ultimate collection as is, inspection recommended
74
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1278A
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1293A
1294
1295
1296
Clock/radio/alarm/Ipod docking station, Sony dream machine model ICF-DS15IP (untested,
Toby jug, vintage Robin Hood (untested, inspection recommended) (SH)
Plates, collectable Queen Elizabeth II silver jubilee commemorative plates by Falconware,
England, qty 3 (inspection recommended) (SH)
Toby mugs, qty 3, collectable Star Trek - the next generation (inspection recommended) (SH)
Ceramic face masks, collectable (inspection recommended) (SH)
Porcelain mugs 'Royal Albert' Lady Carlyle (Authenticity unknown, inspection recommended) (SH)
Handbag, labelled Louis Vuitton, black, authenticity unknown (untested, inspection recommended)
(SH)
Wine, Patrizi "Nebbiolo D'Alba" 2010, 750ml bottle, sold as lot, must take 6
Wedgewood 225th anniversary Guiness Dublin London basalt black & wheat jasper on stand
Glass basket, circa 1910, amethyst, hand blown (untested, inspection recommended) (SH)
Vase, heavy red art glass, weighs 2kg (Untested, inspection recommended) (SH)
Teapot, red china, Australian pottery coffee pot & white ceramic coffee pot (inspection
recommended) (SH)
Diversity receiver, 'Sure' model UT4A-TG with belt pack, 'Sure' model UT1-TG & extra carry case
(untested, inspection recommended) (S)
Assorted items, box of including wireless broadband router & carburettor (As is, untested,
Nail technician kit & $ass beauty items (As is, untested, inspection recommended) (SH)
Glass & crystal ware, assorted glasses, decanter & ash trays, as is (Inspection recommended)
(SH)
Clementoni 4000 piece puzzle (SH) as is, inspection recommended
Xbox 360 racing wheel with pedal, clamp, power adapter & cable (untested, inspection
recommended) (SH)
Glass chess set (SH) as is, inspection recommended
Memorabilia, Cap in case, Faith Hill, authenticity unknown, untested, inspection recommended
(SH)
Purses, 3 x branded Louis Vuitton, authenticity unknown, inspection recommended (SH)
Purses, 2 x branded Louis Vuitton, authenticity unknown, inspection recommended (SH)
Assorted office tools including 2 webcams, headsets, audio player, card reader, untested,
inspection recommended (SH) (sold as lot)
Digital indoor/outdoor antenna (SH) "Bauhn" model # AOA-908
Wireless microphone system for video camcorders with lavalier transmitter, 'Nandy Systems'
model 151VR/LT (untested,inspection recommended) (S)
Belt pack transmitter, 'Nady Systems' UHF UB-4, sold per each (untested, inspection
recommended) (S)
AC international adapter (SH) as is, untested, inspection recommended
Cree torch, 2000 lumen, 500 mtr with battery & 2 chargers (untested, inspection recommended)
(SH)
Wireless receiver, 'Nandy Systems' UHF-4 single channel (untested, inspection recommended)
(S)
Network computer systems, qty 8, Wyse Network hubs including chargers, untested, inspection
recommended (SH) (sold per each, must take all)
75
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1311A
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
Malaysian Dagger (SH) "Royal Selangor" as is, inspection recommended
Belt buckle, 'roll of the dice' with inbuilt bottle opener on reverse (inspection recommended) (SH)
Nautical barometer (SH) as is, inspection recommended
Stand for iPhone, mobile or tablets 'iPlunge' (Untested, inspection recommended) (SH)
Mobile phone, DGTEC unlocked dual sim in box with charger and headphone (Untested,
Sim cutter, 4 FF regular/micro to nano cutter (Untested, inspection recommended) (SH)
iRiver 8Gb MP3 player with expandable micro SD slot & Samsung earphones, untested,
Canon Powershot A4000 IS HD digital camera, 16mp, 8 x optical zoom, USB cable & case,
Navman Smart GPS & Navig8r T43B both with cables & in car mounts, untested, inspection
Computer equipment, assorted including RAM 1gb, HDD 160G qty 2 & cables (As is, untested,
DVD's, qty 13 miscellaneous including 8 Mile, American Chopper & Any Given Sunday, untested,
Hair removal light, BaByliss, Paris includes 1 spare 1000 flash cartridge, untested, inspection
recommended (SH) (sold per each)
Jewellery loupe & currency detector, sold as lot (untested, inspection recommended) (SH)
iPhone 4, qty 2, model A1387 no charger, both have cracked screens, as is, untested, inspection
recommended (SH)
Apple iPhone 3 phones qty 2 (1 x damaged) & HTC phone qty 1, no chargers, untested,
DVD's, qty 10, assorted, some sealed (untested, inspection recommended) (SH)
Night scope binocular (untested, inspection recommended) (SH)
Pocket scale, 500 gram x 0.1 gram (untested, inspection recommended) (SH)
Thermometer, infrared non-contact, -50 to 380 deg C (untested, inspection recommended) (SH)
Hands Free Car Kit - "Octopus", solar powered, sold per each, as is, inspection recommended.
Apple iPhone 4 model, A1332, no charger, passcode locked, untested, inspection recommended
(SH)
Digitech guitar foot pedal, Grunge, overdrive/distortion effects, untested, inspection recommended
(SH)
Apple iPhone 5c model, A1529 with charger, untested, inspection recommended (SH)
Apple Macbook Pro, model A1502 with charger in box, untested, inspection recommended (SH)
Apple iPod touch, 8GB, model A1367, untested, inspection recommended (SH)
Apple iPhone 5, model A1429, no charger, untested, inspection recommended (SH)
Apple iPhone 4 model, A1332, no charger, lock button not working & passcode locked, untested,
MacBook Pro 15.4 inch 8.2, i7 Quad Core 2.0 Ghz processor, OSX 10.9 mavericks installed, 500
gb HDD, 4 gb DDR3 1333 Mhz RAM, Thunderbolt, Bluetooth, Wi-Fi, FaceTime HD camera, DVD
R+ drive, dual graphics with charger in box (Untested, inspection recommended) (SH)
76
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
Trustee, Pawnbrokers, Jewellery & Collectables Online Auction
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
Raymond Weil Watch. Gents size. 30 micron gold plate "Fidelio" Fine quality swiss watch
cast 9ct Y/G dress ring with three rows of diamonds, channel set through the centre and grain set
either side. Total weight 0.28cts, colour TLB, clarity VS-SI, Valuation $2000 (untested, inspection
recommended) (SH)
14ct Y/G fancy pierced out hinged bangle, set with 121 pink opaqued rubies, 5.40cts total weight,
Valuation $14000 (untested, inspection recommended) (SH)
9ct Y/G fancy diamond set cross. Set with 40 single cut diamonds at 0.40cts total weight, colour
TLB and clarity SI, Valuation $2250 (untested, inspection recommended) (SH)
9ct Y/G cluster style ring. TDW is 0.40cts, colour G-H, and clarity VS-SI, Valuation $3000
9ct Y/G ring, Antique 3 x diamond style ring, Valuation $1500 (untested, inspection
recommended) (SH)
Natural black pearl unset (untested, inspection recommended) (SH)
pair of matching white pearl drops (untested, inspection recommended) (SH)
Strand of White pearls (untested, inspection recommended) (SH)
9ct Y/G ring set with 1 marquise Golden citrine, and shoulders grain set with diamonds weighing
0.03cts in total, Valuation $1395 (untested, inspection recommended) (SH)
9ct Y/K ruby and diamond set ring (untested, inspection recommended) (SH)
9ct Y/G open rectangular bar link bracelet. 9 rubies in a rubbed over style in each link, Valuation
$6900 (untested, inspection recommended) (SH)
18ct Y/G tapered band with W/G triple crownclaw coronet set with 3 diamonds at 0.46cts in total. 4
single cut diamonds on shoulders, Valuation $2850 (untested, inspection recommended) (SH)
large blister pearl (untested, inspection recommended) (SH)
9ct Y/G tapered ring with centre plate cushion shaped, set with 1 green/blue emerald, Valuation
9ct Y/G fancy hoops (untested, inspection recommended) (SH)
15ct R/G split band antique style ring with black stone (untested, inspection recommended) (SH)
9ct Y/G blue stone ring with single diamond on each shoulder (untested, inspection
recommended) (SH)
18ct Y/G antique cluster ring with diamonds set in palladium and platinum. Total weight 0.20cts,
colour F-H, clarity VS, Valuation $2550 (untested, inspection recommended) (SH)
9ct Y/G fine chain with gold sapphire pendant (untested, inspection recommended) (SH)
Strand of Multi coloured pearls (untested, inspection recommended) (SH)
77
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1541
1542
1543
1544
1545
1546
1547
1548
Jade Bangle small size (untested, inspection recommended) (SH)
9ct Y/G ring set with 3 diamonds, total weight 0.095cts, colour F/G, clarity SI, Valuation $1650
18ct W/G with upswept shoulders. 4 claw setting coronet with 1 brilliant cut diamond at 0.33cts,
colour J, clarity SI1, Valuation $3600 (untested, inspection recommended) (SH)
1ct of assorted diamonds (untested, inspection recommended) (SH)
9ct Y/G dress ring in a split cross over design. Set with Baguettes and brilliant cut diamonds. Total
weight 0.82cts, colour G, clarity SI2, Valuation $3400 (untested, inspection recommended) (SH)
18cts W/G tapered half round ring with a double flower design set with diamonds.TDW is
0.575cts, colour K-TLB and clarity is PI-Piqued, Valuation $3000 (untested, inspection
recommended) (SH)
14ct Y/G tapered band hammer set with 7 brilliant cut diamonds.TDW 0.64cts,colour G-H, clarity
SI, Valuation $2800 (untested, inspection recommended) (SH)
8.47cts of black diamond (untested, inspection recommended) (SH)
9ct Y/G diamond set dress ring (untested, inspection recommended) (SH)
Pair of Cognac Diamonds TDW 0.56cts, Valuation $1000 (untested, inspection recommended)
(SH)
Ring, 18ct yellow gold solitaire diamond ring, stamped, 1.8 grams (untested, inspection
recommended)(SH)
Ring, 9ct yellow gold amethyst ring, stamped, 2.5 grams (untested, inspection recommended)(SH)
Ring, 14ct white gold cultured peral ring, stamped, 3.5 grams (untested, inspection
recommended)(SH)
Jewellery case with assorted jewellery, including sterling silver (untested, inspection
recommended) (SH)
Sterling silver jewellery, bag of assorted, some hallmarked, untested, inspection recommended
(SH) (sold as lot)
Carved wooden trinket box of gold colourd jewellery, rings, chains, watch etc (SH) authenticity
unknown, untested, inspection recommended
Fountain pen, 1958 Parker "51" unused (Untested, inspection recommended) (SH)
Jewellery items assorted watch & earrings, brooch (As is, untested, inspection recommended)
(SH)
Gold & diamond ring stamped 9ct (SH) authenticity unknown, untested, inspection recommended
White gold & diamond ring stamped 375 (SH) authenticity unknown, untested, inspection
recommended
Watch, labelled 'Felea' analog, white face, detailed bezel & band (As is, untested, inspection
recommended) (SH)
Watch, labelled 'Citizen' analog gold toned face, bezel & band (As is, untested, inspection
recommended) (SH)
Watch, labelled 'Hotel' analog, white face, gold toned bezel & black band with case (As is,
untested, inspection recommended) (SH)
Watch, labelled 'Guess' analog, black face, silver toned bezel & band (As is, untested, inspection
recommended) (SH)
Ring, ladies 9ct yellow gold set with oval cabachon ruby & diamond shoulders, stamped 375
Bangle, sterling silver with safety chain, stamped 925 (untested, inspection recommended) (SH)
78
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1583
1584
Watch, labelled 'Guess' analog, gold toned face, bezel & band with case (As is, untested,
Black Agate bead necklace, untested, inspection recommended (SH)
Basketball cards, big collection over 150 (Inspection recommended) (SH)
Bank note bicentennial collection with uncirculated $10 $5 $2 plus coins with certificate - rare #1
Medal collection, ANZAC The Rising Sun (Inspection recommended) (SH)
Coin 1993 proof silver dollar (Untested, inspection recommended) (SH)
Coin proof 1988 $5 coin (Inspection recommended) (SH)
Coins, medals x 4 different (Inspection recommended) (SH)
Coin proof 1984 $1 coin (Inspection recommended) (SH)
Coin, Chinese Maio 1861-1908 big commemorative cased dragon dollar (SH) authenticity
Coin, 1935 English silver crown "rocking horse" crown (SH) authenticity unknown, untested,
Coin, Australian Bradman uncirculated $5 bi metal in Royal Australian Mint sleeve (SH)
authenticity unknown, untested, inspection recommended
1982 Australian $10 sterling silver proof Commonwealth games in official royal mint box with
certificate (SH) authenticity unknown, untested, inspection recommended
Royal Australian Mint 20th century five coins silver sets and one ounce silver plaque (Untested,
Coins sets, two sets of 1982 Royal Australian Mint uncirculated sets (Untested, inspection
recommended) (SH)
Coin, Perth Mint 2006 FIFA world cup one ounce silver coin (Untested, inspection recommended)
(SH)
Coins 1998 uncirculated set (Inspection recommended) (SH)
Coin, 1900 - 1990 the Queen Mother one crown coin (Untested, inspection recommended) (SH)
Royal visit to Australia (Inspection recommended) (SH)
Coins 2001 uncirculated set of coins (Inspection recommended) (SH)
Coins 1995 proof coin set (Inspection recommended) (SH)
Bank note Commonwealth Of Australia five pound note (Untested, inspection recommended) (SH)
Bank note Commonwealth Of Australia one pound (Untested, inspection recommended) (SH)
Bank note, misprinted Commonwealth Of Australia five pound note (Inspection recommended)
(SH)
Coins, penny set near complete album (Inspection recommended) (SH)
Bank note $2 in Reserve Bank folder (Inspection recommended) (SH)
Coins 1992 Space $5 uncirculated and Queen Mary coin (Inspection recommended) (SH)
Coin, US 1886-1986 Liberty One Dollar Silver coin in original Presidential box (Untested,
Florin, 1954 uncirculated Australian (Untested, inspection recommended) (SH)
Coin, USA 1884 $1 (Inspection recommended) (SH)
Florin, Australia 1919 (Inspection recommended) (SH)
Coin, Diamond Jubilee Commonwealth Of Australia one crown (Untested, inspection
recommended) (SH)
Coin Chinese 'Mao' (Untested, inspection recommended) (SH)
Angel made of different gem stones, frame 15.5 x 15 cm (Inspection recommended) (SH)
Florin, 1901-1951 uncirculated Australian Jubilee (Untested, inspection recommended) (SH)
79
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
Coins 1983 proof set of coins (Inspection recommended) (SH)
Currency, box of coins & bank notes Australian and world bank notes & coins (Inspection
recommended) (SH)
Coins, two hundred Australian one and two cent coins, different dates (Inspection recommended)
(SH)
Watch, labelled Marcel Drucker, ladies, white face, detailed bezel & band, untested, inspection
recommended (SH)
Jewellery box with assorted jewellery pieces, untested, inspection recommended (SH) (sold as lot)
Stamps pre decimal 38 blocks of 4 (Inspection recommended) (SH)
Bank notes four very old Japanese notes J (Inspection recommended) (SH)
Bank notes x 9 uncirculated World notes (Inspection recommended) (SH)
Sterling silver jewellery, rings, pendants etc mostly stamped 925 or hallmarked (approx 50grams
in total) (SH) authenticity unknown, untested, inspection recommended
Necklace, heart pendant and earring set, gold coloured stamped "Xuping" approx 2.5 grams (SH)
authenticity unknown, untested, inspection recommended
Estate jewellery in tin, rings, pearls, chains, watches, coins and notes (SH) authenticity unknown,
untested, inspection recommended
Coins, 4 New Zealand half crown predecimal coins (SH) authenticity unknown, untested,
Bank note, 1962 fiji shilling predecimal serial C8 08760 (SH) authenticity unknown, untested,
Bank notes, two Australian consecutive and uncirculated $1 notes (Untested, inspection
recommended) (SH)
recommended) (SH)
Bank note Reserve Bank of Australia last $2 paper bank note in special collector folder with
original envelope (Untested, inspection recommended) (SH)
Stamps, collection of world stamps on 27 pages (Inspection recommended) (SH)
Cigarette cards of ships, old, x 36 (Inspection recommended) (SH)
Stamps blocks, 2 pages of world etc (Inspection recommended) (SH)
Stamp blocks, 2 pages Australian mint pre decimal (Inspection recommended) (SH)
Stamp imprint blocks, page of Australian pre decimal (Inspection recommended) (SH)
Pendant, Buddha carving, jade (untested, inspection recommended) (SH)
Superman coins, set of 6 in collectors case (untested, inspection recommended) (SH)
Amulet, Chinese zodiac, 95mm, 130 grams, year of the dragon (untested, inspection
recommended) (SH)
Amulet, Chinese zodiac, 95mm, 130 grams, year of the tiger (untested, inspection recommended)
(SH)
Medallions etc, sheet of (Inspection recommended) (SH)
Jewellery, box of assorted (inspection recommended) (SH)
Coins, old, page of (Inspection recommended) (SH)
Bank note Australia $10 polymer note (Untested, inspection recommended) (SH)
Coin sets, New South Wales uncirculated by the Royal Australian Mint (Inspection recommended)
(SH)
Stamps Sir Don Bradman memorial pack (Inspection recommended) (SH)
80
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
Stamps high value pre decimal Bridge Robes, Airmail, 5/- cattle etc 100's #(Inspection
recommended) (SH)
Watch, labelled Haurex, analog, white square face, gold toned bezel with clear stone inlay, wide
chain link band, untested, inspection recommended (SH)
Conscript medal Australian (Inspection recommended) (SH)
Stamps, old world stamp album, lots of stamps (Inspection recommended) (SH)
recommended) (SH)
Currency, last $5 paper bank note and first $5 coin by Royal Australian Mint (Untested, inspection
recommended) (SH)
Commonwealth of Australia post master, Generals Department set King George V 1924 - 1931,
66 stamps, sold as lot (SH) authenticity unknown, untested, inspection recommended
Banknote, Hong Kong $1 Authur Clarke (SH) authenticity unknown, untested, inspection
recommended
$10 Hong Kong Qty 2, sold as lot 1977 mint (SH) authenticity unknown, untested, inspection
recommended
Coins, 2 Australian commemorative silver florins 1951 & 1954 (sold as lot) (SH) authenticity
Coin, uncirculated Australian $2 Remembrance, coloured coin (SH) authenticity unknown,
Coin sets, Qty 2 uncirculated New Zealand with half crown to half penny and a US to half dollar
(sold as lot) (SH) authenticity unknown, untested, inspection recommended
Coin, collection of Australia half penny's in old "hendo" album (SH) authenticity unknown,
Banknotes (2) $10 consecutive uncirculated, inspection recommended
Banknotes (2) $5 consecutive uncirculated, inspection recommended
Estate coin collection of world and Australian coins in album approx 380 (SH) authenticity
Stamps, 2 pages of New South Wales stamps (Inspection recommended) (SH)
Stamps, page of early mint Australian (Inspection recommended) (SH)
Stamps, page of Australian states stamps (Inspection recommended) (SH)
Stamps, page of Queensland stamps (Inspection recommended) (SH)
Stamps, page of Victorian stamps (Inspection recommended) (SH)
Stamps, page of Australian states old (SH) authenticity unknown, untested, inspection
recommended
Stamps, Qty 2 page of mint British, sold as lot (SH) authenticity unknown, untested, inspection
recommended
Stamps, page of South Australia 1883 - 1902, 48 stamps, sold as lot (SH) authenticity unknown,
Stamps, page of Great Britain 1881 - 1947, 42 stamps, sold as lot (SH) authenticity unknown,
Stamps, page of USA asst 1902 - 1960 (SH) authenticity unknown, untested, inspection
recommended
Stamps, page of Britain Queen Elizabeth collection (SH) authenticity unknown, untested,
81
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
Stamps, page of Australian states 1861 - 1907 (SH) authenticity unknown, untested, inspection
recommended
Stamps, box of (Inspection recommended) (SH)
Watch, gents gold Bulova, black face, (Untested, inspection recommended) (SH)
Siam bracelet, stamped 'Siam Sterling;, earrings & brooch, authenticity unknown, untested,
Coins qty 3 British India 1787, France 1856 & Britannia UK 1853 (Authenticity unknown,
Watch, ladies, white face, stone inlay in bezel & band, authenticity unknown, untested, inspection
recommended (SH)
Figurine, old bronze Chenrezig Buddha (Authenticity Unknown, untested, inspection
recommended) (SH)
Earrings, purple stone set in silver, marked 925 (Authenticity Unknown, untested, inspection
recommended) (SH)
Pendant & chain, purple stone surrounded by white stones set in silver, both marked 925
(Authenticity Unknown, untested, inspection recommended) (SH)
Earrings, coloured gemstones set in silver, marked 925 (Authenticity Unknown, untested,
Ring, shell & onxy set in silver, marked 925 (Authenticity Unknown, untested, inspection
recommended) (SH)
Ring, cubic zirconias & silver, marked 925 (Authenticity Unknown, untested, inspection
recommended) (SH)
Ring, men's, silver with white stone, black surround & gold feature (Authenticity Unknown,
untested, inspection recommended) (SH)
Ring, bow style, silver marked 925 (Authenticity Unknown, untested, inspection recommended)
(SH)
Ring, gold plated with green & white stones (Authenticity Unknown, untested, inspection
recommended) (SH)
Neck chain, gold coloured (Authenticity Unknown, untested, inspection recommended) (SH)
Neck chain, gold coloured with black gold twist pattern (Authenticity Unknown, untested,
Ring, white stones set in crossover silver, marked 925 (Authenticity Unknown, untested,
Neck chain, gold coloured, wide link (Authenticity Unknown, untested, inspection recommended)
(SH)
Ring, large ball style, Taxco Mexico silver (Authenticity Unknown, untested, inspection
recommended) (SH)
Ring, pink & white stones set in silver, marked 925 (Authenticity Unknown, untested, inspection
recommended) (SH)
Neck chain, gold coloured thick twist pattern (Authenticity Unknown, untested, inspection
recommended) (SH)
Ring, pink & white stones set in silver, marked 925 (Authenticity Unknown, untested, inspection
recommended) (SH)
Ring, pink stone set in textured silver, marked 925 (Authenticity Unknown, untested, inspection
recommended) (SH)
82
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1 set W/G pearl diamond Cocktail Ring. 1 cultured pearl at 8.74mm surrounded by fancy leaf
petals, Valuation $1650 (untested, inspection recommended) (SH)
14ct Y/G ring set with one single tanzanite at 0.62cts and diamonds set at top of stone with a total
weight of 0.10cts, Valuation $2200 (untested, inspection recommended) (SH)
1.01cts of vivid green laboratory emeralds (untested, inspection recommended) (SH)
11.39cts of blister turquoise (cabachon) (untested, inspection recommended) (SH)
9ct Y/G cross over pattern ring with diamonds, Valuation $1350 (untested, inspection
recommended) (SH)
Manmade colour change Alexandrite. 12.85ct (untested, inspection recommended) (SH)
14ct Y/G diamond cluster earrings in flower design, total weight being 0.52cts, colour TLB, clarity
SI2-3, Valuation $2900 (untested, inspection recommended) (SH)
9ct Y/G hollow half round hinged bangle, cross over split design. Grain set with 30 single
diamonds (0.24cts )and 14 carre' cut synthetic blue sapphires, Valuation $3100 (untested,
21.45cts of natural uncut Australian sapphire (untested, inspection recommended) (SH)
1.03ct of natural diamonds (untested, inspection recommended) (SH)
silver tiffany and co ring (untested, inspection recommended) (SH)
14ct W/G cluster style ring with a single blue sapphire in the centre and white diamonds
surrounding, Valuation $2000 (untested, inspection recommended) (SH)
9ct W/G setting band style ring with colour treated diamonds and white diamonds, Valuation
7.34cts white lightning ridge opal (untested, inspection recommended) (SH)
9ct Y/G locket with filigree detail at front (untested, inspection recommended) (SH)
6.60cts of Blue topaz (untested, inspection recommended) (SH)
Natural grey pearl unset (untested, inspection recommended) (SH)
9ct Y/G plain hoops (untested, inspection recommended) (SH)
9ct W/G wedding band set with diamonds (untested, inspection recommended) (SH)
18ct Y/G ring with W/G cluster setting holding 7 brilliant cut diamonds at 0.50cts total weight,
colour G, clarity SI1, Valuation $2800 (untested, inspection recommended) (SH)
18ct Y/G engagement style ring set with diamonds, Valuation $1800 (untested, inspection
recommended) (SH)
Pendant, 18ct yellow gold cubic zirconia cluster pendant, stamped, 1.9 grams (untested,
inspection recommended)(SH)
18ct W/G tapered band ring set with blue sapphires and 12 diamonds, Valuation $2250 (untested,
9ct Y/G half round band set with 3 pearls and 4 brilliant cut diamonds at 0.04cts total weight,
14ct W/G crossover design ring, with diamonds hammer set into top section, Valuation $2550
Gents 10cts W/G ring with pierced out scroll underbezel. Centre square set with 5 rows of
diamonds (25) and diamonds set in two tone shoulders. TDW 1.175cts, Valuation $4475
10ct Y/G cushion cut citrine ring, Valuation $1750 (untested, inspection recommended) (SH)
11.09ct of natural citrine (untested, inspection recommended) (SH)
9ct Y/G small ball drop earrings (untested, inspection recommended) (SH)
83
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
9ky Y/G curb link chain with Citrine Pendant, Valuation $2150 (untested, inspection
recommended) (SH)
2 piece set of necklet and bracelet. The necklet has a green paste pendant and the bracelet is set
with faceted paste stones, Valuation $2975 (untested, inspection recommended) (SH)
pair of matching black pearl drops (untested, inspection recommended) (SH)
18ct Y/G wide band (untested, inspection recommended) (SH)
silver tiffany and co bangle (untested, inspection recommended) (SH)
14ct Y/G gents diamond rings half round band with upswept fluted shoulders and a centre white
square and set with 1 brilliant cut diamond at 3.9x4x2.46mm G colour S1, Valuation $3075
2 piece wedder set. 18ct Y/G with marquise cut and baguette cut diamonds. 0.43cts in approx
total. Colour G, clarity VS, Valuation $5400 (untested, inspection recommended) (SH)
2.16cts of black/ white opal (untested, inspection recommended) (SH)
Natural Lightning Ridge opal 0.90ct (untested, inspection recommended) (SH)
Lightning Ridge natural black opal 1.60cts (untested, inspection recommended) (SH)
18ct Y/G ring with sapphire and diamonds set in 18ct W/G claws, Valuation $1750 (untested,
53.22cts of cabachon lapis lazuli (untested, inspection recommended) (SH)
pearl drop earrings Y/G (untested, inspection recommended) (SH)
11.02ct of natural ruby (untested, inspection recommended) (SH)
9ct Y/G heart shaped locket (untested, inspection recommended) (SH)
9ct W/G ring set with three rows, channel set of cubic zirconia, Valuation $1400 (untested,
18ct Y/G gents ring with 1 old cut diamond weighing 0.80cts. 10 brilliant cut diamonds grain set
weighing 0.20cts, Valuation $9500 (untested, inspection recommended) (SH)
9ct Y/G antique wrist watch (untested, inspection recommended) (SH)
Strand of White pearls (untested, inspection recommended) (SH)
Raymond Weil Watch. Ladies size. 30 micron gold plate "Fidelio" Fine quality swiss watch
9ct Y/G ball drop earrings (untested, inspection recommended) (SH)
9ct Y/G ring set with a blue stone (untested, inspection recommended) (SH)
Ring, 9ct yellow gold diamond dress ring, stamped, 1.5 grams (untested, inspection
recommended)(SH)
Natural white pearl unset (untested, inspection recommended) (SH)
18ct Y/G ring set with 4 princess cut diamonds invisibly set with W/G bezel, Valuation $2800
Ring, 9ct yellow gold created ruby & diamond ring, stamped, 1.5 grams (untested, inspection
recommended)(SH)
14ct Y/G ring set with pale blue stone and diamonds (untested, inspection recommended) (SH)
Ring, 14ct yellow gold cubic zirconia dress ring, stamped, 2.4 grams (untested, inspection
recommended)(SH)
Ring, 9ct yellow gold black cultured peral & diamond ring, stamped, 2 grams (untested, inspection
recommended)(SH)
18ct W/G tapered band ring set with blue sapphires and diamonds, Valuation $2950 (untested,
Three strand of white pearls (untested, inspection recommended) (SH)
84
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
Bracelet, 9ct yellow gold natural stone set bracelet, garnet, amethyst, peridot & topaz, stamped,
6.4 grams (untested, inspection recommended)(SH)
Loose Argyle purplish pink diamond at 0.09cts, Valuation $2700 (untested, inspection
recommended) (SH)
18ct Yellow and White gold crossover design ring set with diamonds and single Tanzanite in a
trilliant cut in the centre, Valuation $5800 (untested, inspection recommended) (SH)
18ct W/G band style ring with 5 brilliant cut diamonds channel set. TDW 0.25cts, colour F, clarity
VS-SI, Valuation $2700 (untested, inspection recommended) (SH)
14ct Y/G tapered band with diamonds channel set in two rows. 0.44cts in total weight, TLB and
SI2, Valuation $2100 (untested, inspection recommended) (SH)
18ct Y/G ring with W/G claw setting holding I dark blue sapphire (0.90cts) and 12 single cut
diamonds surrounding at 0.12cts total weight, Valuation $2200 (untested, inspection
recommended) (SH)
9ct y/G Irish hand/heart earrings (untested, inspection recommended) (SH)
18ct W/G and Platinum+platinum antique ring 2.08g in weight, Valuation $2795 (untested,
9ct Y/G Bridal Set. Total weight of diamonds in engagement ring 0.05cts, total weight in wedder in
heart shaped setting 0.08cts, Valuation $2350 (untested, inspection recommended) (SH)
Ring, 9ct yellow gold topaz dress ring, stamped, 2.9 grams (untested, inspection
recommended)(SH)
9ct Y/G 3 brilliant cut diamonds Dress Ring at 1 x 2.5mm, 2 x 2.4 mm; colour G/H, clarity S12,
stainless steel swatch watch (untested, inspection recommended) (SH)
14ct Y/G tapered half round with channel set diamonds set on an angle on the top, Valuation
1 set Y/G diamond bridal set rings 6 claw coronet setting, 1 brilliant diamond 3.83mm 0.22 cts
Colour: VS1. 16 single cut diamond set in 2 rows. F/G VS: 18ct Eternity Ring F VS2, Valuation
9ct Y/G multi diamond grain set ring, 23 brilliant cut diamonds weighing 0.30cts, colour H, clarity
Vs-SI, Valuation $3000 (untested, inspection recommended) (SH)
1 set Y/G diamond flower cluster ring : 4 claw set in centre with 1 brilliant cut diamond 0.15 cts
total . 28 Brilliant cut diamonds at 0.42cts in total, Valuation $4000 (untested, inspection
recommended) (SH)
85
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
Hardware & Tool Online Auction
2
Alloy rim, Crossfire Performance Wheels Gross black Milled Model: HJAK9305 Offset: 30 Hole:
6H PCD: 114.3 Borg: 73.1 Finish: BLK/M5 in boxes, inspection recommended (sold per rim, must
take all 4)
4
Tyres on rims (Sh) "Bridgestone" 245/45R18 on 5 stud, holden rims, set of 4, sold as lot, untested,
Tyres, qty 4, Dunlop Grandtrek AT20, 225/70 x 17, untested, inspection recommended (sold as lot
of 4)
Plumbing products Qty x 2 floor mounted wall fixed drinking fountains, sold as lot, untested, (S),
Plumbing products, pallet qty flush pipes B8070 approx 16 cartons, sold as lot, untested,
inspection recommended (S)
Plumbing products, pallet qty, toilets x 16, wall faced pan, model Envy 11, white, sold as lot,
untested, inspection recommended (S)
Flick mixers "Ovale" model 23041-0 wells marked, sold per each, untested, inspection
recommended (S)
Plumbing products, pallet qty, vanity basins assorted x 27 althea ceramica, lano, mp direct,
caroma, sold as lot, untested, inspection recommended (S)
Plumbing products, pallet qty assorted accessories, adjustable bottle traps, aqua cooler bubbler,
urinal kits, flick mixers, toilet roll holders etc, sold as lot, untested, inspection recommended (S)
Plumbing products, pallet qty 2 x toilet pans "Caroma", 1 x cistern "Inuisi", 1 x wall basin, 1 x
vanity basic, 1 x wall basin lavatory "Caroma", sold as lot, untested, inspection recommended (S)
Plumbing products, pallet qty toilet seats, assorted x 86 coloured plastics "Caroma-Villeroy &
Boch", sold as lot, untested, inspection recommended (S)
Plumbing products, pallet qty vanity basins, cisterns, basin waste plugs (240) x 19, sold as lot,
Plumbing products, pallet qty vanity basins, lavatory sinks x 16 caroma, gebert, sold as lot,
Plumbing products, pallet qty vanity basins, approx 24 "Caroma" cube, Villeroy & Boch, Liano,
sold as lot, untested, inspection recommended (S)
Plumbing products, pallet qty assorted 35 x toilet seats, white, approx 15 x vanity basins, qty wall
basins, sold as lot, untested, inspection recommended (S)
Plumbing products, pallet qty toilet pans x 10 "Caroma", "Parisi" 6 x toilet seats, sold as lot,
5
6
7
8
9
11
12
13
14
15
16
17
18
19
86
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
20
Plumbing products, pallet qty 9 x toilet pans, flaminia, villeroy & boch, 2 x wall hung urinals
"caroma", 5 x A55 vanity basins "Kohler" "Fowler", sold as lot, untested, inspection recommended
(S)
21
Plumbing products, pallet qty 8 x montage swissfix WC with universal fixation system, 8 cartons
slush pipe B8070 (6 pieces per carton), sold as lot, untested, inspection recommended (S)
Plumbing products, pallet qty of toilet pans x 12, 2 x cisterns, 3 x basins, 1 x toilet, sold as lot,
untested, as is, inspection recommended (S)
Plumbing products, pallet qty of vanity basins x 22, fuori box semi incased, sold as lot, untested,
as is, inspection recommended (S)
Plumbing products, pallet qty of 8 x toilet pans, 4 x basins wall mount, 3 x cisterns assorted
Gerbert, Fowler, Parisi, Venecia, Raynor, sold as lot, untested, as is, inspection recommended (S)
Plumbing products, pallet qty of 12 x toilet pans, 2 x toilet seats, 3 x cistern, 1 x wall basin, 1 x
pedestal, foweler, caroma, gebert, sold as lot, untested, as is, inspection recommended (S)
Lawn mower, Talon Garden Hawk, with catcher (untested, inspection recommended) (SH)
Lawnmower (SH) "Masport" president 4000, untested, inspection recommended
Lawnmower (SH) "Talon" sure fire four stroke, with catcher, untested, inspection recommended
Lawn mower, Rover Quattro 40, with catcher (untested, inspection recommended) (SH)
Lawn mower, Victa Hurricane, with catcher (untested, inspection recommended) (SH)
Lawn mower (SH) "Rover" 4 stroke, untested, inspection recommended
Electric lawnmower, 'Icon' 140 watt (untested, inspection recommended) (SH)
Lawn mower, Rover Sprint 475 with catcher (untested, inspection recommended) (SH)
Lawn mower, Santi Lawn Beetie, with catcher (untested, inspection recommended) (SH)
SHEET METAL BRAKE (FINGER FOLDER) - 1.2M Maximum Bending Width: 1220mm Maximum
Folding Thickness (mild steel): 1.5mm/GA (1.0mm Full Width) Maximum Reverse Bend: 8mm
Maximum Box Depth: 75mm Beam Adjustment: 3.2mm Stainless Steel: 0.8mm Aluminium: 2.5mm
ABS Plastic: 5.0mm Copper: 1.8mm (soft) / 1.6mm (hard) Bending Angle: 0-135° Suitable for Box
Making with Removable Fingers Nett Weight: 169kg Inspection Recommended (S)
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Spray paint pump 'Graco' model 1213005403 (Untested, inspection recommended) (SH)
Pressure washer 'Spitwater' (Untested, inspection recommended) (SH)
Mig welder, BOC, industrial, 250c, untested, inspection recommended (SH)
Portable Petrol Inverter/Generator Model:MD3000ER Weight: 29Kg approx 4-stroke Petrol engine
AC: 240V 50Hz 2.6KVA DC: 12V 10A Sold as is, untested, Inspection recommended (SH) (1 Key
with storeman - Key box top left)
40
41
42
43
44
45
46
47
48
49
Arc welder 160AMP, untested, inspection recommended (S) (sold per each)
Panel Beaters pack, 10 tonne, untested, inspection recommended (S) (sold per each)
1 tonne folding engine hoist, untested, inspection recommended (S) (sold per each)
300 piece drill bit set, HSS, untested, inspection recommended (S) (sold per each)
Bike ramp, aluminium, untested, inspection recommended (S) (sold per each)
Inflatable boat, 2.8m, inspection recommended (sold per each)
Double halogen lamp, inspection recommended (sold per each)
20 Litre Knapsack Sprayer & Pack, yellow, plastic, inspection recommended (sold per each)
Socket set, 29 piece, 3/8", inspection recommended (sold per each)
Boat fender, 8.5" x 25", untested, inspection recommended (S) (sold per each)
87
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
50
Folding Aluminium Ramp, Dirt Pit Quad Bike ATV Motorbike Lawn Mower Ramp, FEATURES:
strong Aluminum Construction, Rubber Feet to Prevent Slip Movement, Folding for ease of
Storage and Transportation, 1.8 Metre Adjustable Safety Strap Included, Max single front or rear
axle load - 350Kg, Max height - 850mm, BASIC DIMENSIONS: Fully Extended (ea) : 2260mm
long x 250mm wide x 120mm high, Folded (ea) : 1160mm long x 250mm wide x 150mm high,
51
Portable Twin 500watt Flood Lamp & Stand, INCLUDES 2x Halogen Lamps, 1.2metre power
cord, Single phase 10amp 240volt, Adjustable Vertical & Horizontal Stand, Minimum Height
Setting: 875mm, Maximum Height setting: 1800mm, untested, inspection recommended (2 day
return to store warranty)
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
Single Halogen lamp, untested, inspection recommended (S) (sold per each)
Air hose reel, 15mtr, untested, inspection recommended (S) (sold per each)
204 piece power set, HCS, inspection recommended (sold per each)
5" bench vice with anvil, inspection recommended (sold per each)
High pressure water blaster, 1800psi, inspection recommended (sold per each)
2 tonne hydraulic floor jack, untested, inspection recommended (S) (sold per each)
15m air line hose, blue, untested, inspection recommended (S) (sold per each)
Bending brake, inspection recommended (sold per each)
300A Jumper Leads, untested, inspection recommended (S) (sold per each)
High pressure spray gun, untested, inspection recommended (S) (sold per each)
Socket set, 21 piece (19-50mm), untested, inspection recommended (S) (sold per each)
Mobile mechanic seat, untested, inspection recommended (S) (sold per each)
Jockey wheel, 800lbs 6", inspection recommended (sold per each)
Engine stand, 1000lb, untested, inspection recommended (S) (sold per each)
Gage shelf stand box section, stainless steel, wire mesh, inspection recommended (SH) (sold per
each)
Cistern x 1 & Bidet x 1, white ceramic, (ex penthouse display) untested, inspection recommended
(SH) (sold as lot)
Safe, 1 x glass shelf approximately 40 x 30 x 36 cm, key not included (Untested, inspection
recommended) (SH)
Garden tools (SH) inc shovels, picks etc sold as lot, as is, inspection recommended
18v Li-ion Drill Kit by Rok Model: 150-19-50233 Voltage:18 Torque Settings: 23+1 torque positions
13mm Keyless chuck Max Torque: 25Nm 2x 1300mAH Lithium Batteries 1hr standard charge 2
Speed LED Work Light Includes: 2x Batteries Charger Drill Support Grip Carry Case Sold as is,
Untested, Inspection recommended (SH)
67
68
69
70
71
Speed LED Work Light Includes: 2x Batteries Charger Drill Support Grip Carry Case Sold as is,
Untested, Inspection recommended (SH)
72
Speed LED Work Light Includes: 2x Batteries Drill Support Grip Carry Case (No Charger) Spare
charger parts in cardboard box Sold as is, Untested, Inspection recommended (SH)
73
74
75
Welder, Futura, Telwin, 1.140, untested, inspection recommended (SH)
Blower / vac (SH) "Ryobi", ultra light plus, untested, inspection recommended
Gerni / Water blaster (SH) "Aquatak 10" untested, inspection recommended
88
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
76
77
78
79
80
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
110
111
112
113
114
115
116
117
Cooler esky, 12 volt, holds 6 cans (inspection recommended) (SH)
Door lock installation kit (SH) Jig, American, in timber box, inspection recommended
Hooks, globes, cables, bin of assorted pieces, sold as lot (inspection recommended) (SH)
Bathroom shelves, 2 sets, novel, glass (SH), inspection recommended
Torque wrench (SH) "Continental" 150lb 1/2" to case, untested, inspection recommended
Light globes, box of assorted pieces, sold as lot (untested, inspection recommended) (SH)
Mop buckets, qty 2 blue and yellow, sold as lot, inspection recommended
Fluro light, Klipt, double, in housing (untested, inspection recommended) (SH)
Welder (SH) mini mig 120 x 240v, untested, inspection recommended
Blower vacuum, '909', 2400W (untested, inspection recommended) (SH)
Whipper Snipper "Victa" RTS1226AA, untested, inspection recommended (SH)
Whipper Snipper "China" handle bars, untested, inspection recommended (SH)
Trimmer (SH) "Echo" SRM200DA 2 stroke, untested, inspection recommended
Whipper snipper (SH) "Pope" 2 stroke, untested, inspection recommended
Whipper snipper (SH) "GMC" untested, inspection recommended
Whipper Snipper "McCullock M+325CLS (SH), inspection recommended
Whipper snipper (SH) "Honda" 4 stroke, untested, inspection recommended
Camping fridge, gas, Lumina, 20lt, untested, inspection recommended (SH)
Joint seal, W2S, dark grey, box of, sold as lot (inspection recommended) (SH)
Delta sander, Bosch, 120 watt, model PDA120E (untested, inspection recommended) (SH)
Air compressor, 12 volt, SCA (untested, inspection recommended) (SH)
Chainsaw "Stihl" large, as is, untested, inspection recommended
12 volt car cooler/warmer (SH) "Buddy" 18 litre, no lead, untested, inspection recommended
Car lights (S) from Ford, pair of, untested
Generator (SH) "Craft Power" model APFGG-2000, 15 litre tank capacity, untested, inspection
recommended
Fire extingushers, 4.5 kg ABE powder type (Untested, inspection recommended) (SH)
BBQ tool set "Beef Eater" (SH), inspection recommended
Angle Grinder, Ozito AGG-051K, 230mm (9") grinder, 2200W, with handle, untested, inspection
recommended (SH)
Wind surf board, BLC, Alto no sail (SH) inspection recommended, untested
Timber sleigh tables qty 4 with dual carry handles 67 x 167 cm white (Untested, inspection
recommended) (SH)
Valves, Qty x 4 "master flow" brown, P2, 2 1/16" 5000 API (sold price the lot) inspection
recommended
Studs and nuts, to large crate "Bremick" incl boxed 7/8 unc x 145, 7/8 x 235 etc plus hex plugs,
flanges, small valves (sold price the lot to crate) inspection recommended
Doors, Qty x 19, various sold per each, buyer must take all 19 doors (S) inspection recommended
Doors, Qty x 24 various, sold price per each, buyer must take all 24 doors (S) inspection
recommended
Entry door, maple, 4 vertical frosted glass panels, 2040 x 1200 (S) inspection recommended
Entry door, 11 Horizontal frosted glass panels 2350 x 1200 approx (S) inspection recommended
Entry doors, Qty x 2 dark timber, 5 vertical clear glass panes, both doors different, sizes 2340 x
1200 & 2340 x 1020 approx, pre-hung, sold price the pair (S) inspection recommended
Door jambs, qty 3, with only 2 doors including TFG green door & pressed 6 panel white door, sold
as lot (inspection recommended)(S)
89
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
118
119
120
121
123
124
126
127
128
129
131
133
134
Doors, Qty x 10, various, sold price per each, buyers must take all 10 doors (S) inspection
recommended
Doors, Qty x 21, various, sold price per each, buyer must take all 21 doors (S) inspection
recommended
Doors, Qty x 2, 2040 x 820 approx one mauve colour, sold price per each, buyer must take 2 (S)
Doors internals, mostly sliding doors, no hardware 820 to 520 (Sold as price per each, must take
lot, inspection recommended) (SH)
Doors, Qty x 8 various, sold price per each, buyer must take all 8 (S) inspection recommended
Doors various sizes & designs (Sold as price per each, must take lot, inspection recommended)
(SH)
Door seals, steel & various, raven, to blue stillage, inc steel C section, inc 100 x 40 etc, untested,
inspection recommended (sold as lot)
Qty steel to pack, 3600 x 145 ( x40), (sold as lot). (As is, untested, inspection recommended, SH)
Doghouse, timber, lift up lid, inspection recommended (SH)
Heavy duty safe, combination unknown, (as is), inspection recommended (SH)
Humiplus Fulvic Acid - Organic Soil Conditioner, 19L (5Gal) Tubs, Sold Per Tub, Inspection
Recommended
Advanced IrrigAid - Trace Element Liquid Fertiliser, 20L Bottles, Sold Per Bottle, Inspection
Recommended
Advanced Molyphos - Molybdenum Liquid Fertiliser, 5L Bottles, Sold Per Bottle, Inspection
Recommended
90
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
Phone Shop Closure Online Auction
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Apple iPad Air, MD794X/A, 16GB Wi Fi/Cell, silver, sealed in box, untested, inspection
recommended
Apple iPad Air, MGHX2X/A, 64GB Wi Fi/Cell, grey, sealed in box, untested, inspection
recommended
Nexus 5 Google Phone by LG, black, sealed in box, untested, inspection recommended
Nokia, Lumia 2520 Window tablet, black silk, sealed in box, untested, inspection recommended
Sony Xperia Z Smart phone, black, ex demo, as is, untested, inspection recommended
Nokia Lumina 930 Windows phone, black, sealed in box, untested, inspection recommended
Nokia Lumina 635 Windows phone, black & white, sealed in box, untested, inspection
recommended
Sony Xperia Z3 Compact Smart phone, black, sealed in box, untested, inspection recommended
(sold per each)
(sold per each)
(sold per each)
(sold per each)
Telstra prepaid 3G USB/Wi-Fi, portable Wi-Fi unit, white, sealed in box, untested, inspection
recommended (sold per each)
Telstra prepaid 3G Wi-Fi, portable Wi-Fi unit, white, sealed in box, untested, inspection
Telstra Easy Discovery 4 mobile phone, model T4, grey, sealed in box, untested, inspection
Telstra Bigpond Wi-Fi 4G Advanced portable Wi Fi, ex demo, as is, untested, inspection
recommended (sold as lot) (SH)
91
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
Motorola RAZR MI, model XT905 powered by Telstra Prepaid, black, ex demo, as is, untested,
Telstra Indy prepaid mobile phone, model T50, Ebony black, sealed in box, untested, inspection
recommended
Nokia Lumia 635 Prepaid Smart phone, black, sealed in box, untested, inspection recommended
Telstra Tough 3 mobile phone, model T55, Bluestone, as is, untested, inspection recommended
(SH)
Samsung S5511T1 dual display mobile, Noir black, as is, untested, inspection recommended (SH)
Telstra Easycall 3 Prepaid mobile, grey, as is, untested, inspection recommended (SH)
Telstra Dave mobile, model T83 Android phone, black & yellow, as is, untested, inspection
recommended (SH)
Telstra T108 prepaid mobile, as is, untested, inspection recommended (SH)
Telstra Easytouch 4G, model 2TE T82, dark grey, sealed inbox, untested, inspection
recommended
Samsung GT-E1170T mobile phone, black, sealed inbox, untested, inspection recommended
Telstra Cruise mobile phone, black, sealed in box, untested, inspection recommended (sold per
each)
Samsung Galaxy Ace 3, Android phone, Prepaid, black, sealed in box, untested, inspection
Samsung Galaxy Ace 3, Android phone, Prepaid, black, sealed in box, untested, inspection
Panoram antennas, ultra wide band Mimo antenna 4G booster, as is, untested, inspection
recommended (SH)
Samsung GT-E1170T mobile phone, no charger, as is, untested, inspection recommended (SH)
Booster cradle phone holder & signal booster for car, Smart Phone compatible, as is, untested,
Telstra Long range 12750 twin Dect360 cordless phone in box, as is, untested, inspection
recommended
RFI MSW-3G-TS9 3G mini magnetic base antenna with cable & TS9 connector, as is, untested,
Telstra $30 pre paid multi fit starter kit for 3G or 4G mobile, tablet or mobile broadband, qty 4,
untested, inspection recommended (sold as lot)
Telstra $2 prepaid multi fit Sim starter kit for 3G, 4G, tablet or mobile broadband, qty 12, untested,
inspection recommended (sold as lot)
Telstra prepaid Nano sim starter kit for 3G or 4G mobile phone, qty 9 in pack, untested, inspection
recommended (sold as lot)
Sandisk micro SDHC card, 32GB, qty 4, untested, inspection recommended (sold as lot)
Telstra $30 pre paid Nano sim for iPad, 3GB data, qty 13, untested, inspection recommended
(sold as lot)
Telstra $30 pre paid Micro sim for iPad, 3GB data, qty 7, untested, inspection recommended (sold
as lot)
Phillips 64GB micros SDHC with reader & adapter, untested, inspection recommended
Phillips 32GB micro SDHC with reader & adaptor, untested, inspection recommended
Phillips 8GB micro SDHC with reader & adapter, qty 4, untested, inspection recommended (sold
as lot)
Jabra BT2045 Bluetooth headset sealed in box. untested, inspection recommended
92
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
Windows 7 Pro Upgrade from Home Premium software, untested, inspection recommended
Sandisk Ultra micro SHHC VHS-1 card with adapter, 8GB, qty 2, untested, inspection
Telstra T Hub 2 standard kit, 8GB in box, as is, untested, inspection recommended (SH)
Apple TV model A1469 including Power Cable, HDMI cable & remote, as is, untested, inspection
recommended (SH)
Grrip-it phone holder windshield mount, white, in box, untested, inspection recommended (sold
per each)
per each)
per each)
Grrip-it phone holder windshield mount, graphite grey, in box, untested, inspection recommended
(sold per each)
Grrip-it phone holder windshield mount, graphite grey, in box, untested, inspection recommended
(sold per each)
Cygnet Dashview universal car mount, black sealed in box, untested, inspection recommended
(sold per each)
CMI charger for Apple, 30 pin USB charger, qty 4, untested, inspection recommended (sold as lot)
CMI charger, Universal micro USB, qty 4, untested, inspection recommended (sold per each)
CMI charger for Samsung Galaxy Note 3, qty 5, untested, inspection recommended (sold as lot)
CMI charger Universal micro USB car charger, qty 3, untested, inspection recommended (sold as
lot)
CMI charger for Samsung, S20 pin car charger, untested, inspection recommended
Force phone charger Universal micro USB, qty 3, untested, inspection recommended (sold as lot)
CMI cable Universal micro USB, qty 5, untested, inspection recommended (sold as lot)
CMI cable Universal USB 3.0 micro B, qty 7, untested, inspection recommended (sold as lot)
Powerbug A/C charger, micro USB, qty 3, untested, inspection recommended (sold as lot)
Powerbug IM Premium data cable, Apple Lightening cable, qty 4, untested, inspection
recommended (sold as lot of 4)
Powerbug IM Premium data cable, Apple Lightening cable, qty 4, untested, inspection
Powerbug IM Premium data cable, Apple Lightening cable, qty , untested, inspection
recommended
Powerbug premium data cable, micro USB, white, qty 4, untested, inspection recommended (sold
as lot)
Powerbug premium power pack, qty 4, untested, inspection recommended (sold as lot of 4)
35IXT USB wall charger with assorted cables, qty 3, untested, inspection recommended (sold as
lot) (SH)
35IXT dual USB car charger with micro USB cables, qty 3, white, untested, inspection
35IXT dual USB car charger with micro USB cables, qty 3, blue, untested, inspection
35IXT dual USB car charger with micro USB cables, qty 3, black, untested, inspection
93
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
35IXT dual USB car charger with lightning cable, qty 3, pink, untested, inspection recommended
(sold as lot of 3)
35IXT dual USB car charger with lightning cable, qty 3, black, untested, inspection recommended
(sold as lot of 3)
35IXT dual USB car charger with lightning cable, qty 5, blue, untested, inspection recommended
(sold as lot of 5)
35IXT charge & sync cable with lightning cable, 1m, white, qty 3, untested, inspection
Belkin charger for Samsung, micro USB, qty 4, untested, inspection recommended (sold as lot)
Otter box Reflex case for IPhone 5, qty 2, assorted colours, untested, inspection recommended
(sold as lot)
Otterbox Commuter case for HTC One (M8) & HTC One mini, untested, inspection recommended
(sold as lot)
Otterbox Commuter case for HTC One, qty 2, lime, untested, inspection recommended (sold as
lot)
Otterbox Commuter case for iPhone 5C, assorted colours, qty 2, untested, inspection
Otterbox Commuter case for iPhone 6, 4.7", assorted colours, qty 5, untested, inspection
Otterbox Commuter case for Samsung Galaxy S4, assorted colours, qty 3, untested, inspection
Otterbox Commuter case for Samsung Galaxy S5, black, qty 2, untested, inspection
Otterbox Defender case for HTC One mini, black, qty 2, untested, inspection recommended (sold
as lot)
Otterbox Defender case for Samsung galaxy S4 & S5, untested, inspection recommended (sold
as lot)
Otterbox Defender case for iPhone 4 & 4S, untested, inspection recommended (sold as lot)
Otterbox Commuter case for HTC One Max, untested, inspection recommended
Otterbox Amor case for Samsung Galaxy SIII, assorted colour, qty 5, untested, inspection
Vertex 3 part protection case for iPhone 5 & 5S, assorted colours, qty 3, untested, inspection
recommended (sold per lot of 3)
Otterbox Defender case for iPhone 6 Plus, untested, inspection recommended
Vertex 3 part protection case for iPhone 5 & 5S, assorted colours, qty 3, untested, inspection
recommended (sold per lot of 3)
Otterbox Defender case for Samsung Galaxy Note 8.0, untested, inspection recommended
Turtle leather case for Galaxy Note 4 qty 2 7 Note 4/N910C qty 1, untested, inspection
Turtle TPU case for Galaxy S5 qty 2 & leather case qty 1, untested, inspection recommended
(sold as lot)
Turtle TPU case for iPhone 6 Plus, assorted colours, qty 4, untested, inspection recommended
(sold as lot)
Turtle Tuff case for iPhone 6, assorted colours, qty 4, untested, inspection recommended (sold as
lot)
Turtle TPU case, clear for iPhone 6, qty 3, untested, inspection recommended (sold as lot)
94
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
Turtle TPU case for iPhone 6, black, qty 2, untested, inspection recommended (sold as lot)
Turtle leather wallet pouch for iPhone 6, black, qty 5, untested, inspection recommended (sold as
lot)
Turtle wallet, genuine leather for iPhone 6, assorted colours, qty 4, untested, inspection
CMI heavy duty case for Samsung Galaxy S5, assorted colours, qty 3, untested, inspection
CMI Sci-Fi case for iPhone 5/5S, assorted colours, qty 3, untested, inspection recommended (sold
per lot of 3)
CMI Crystal Flip case for Samsung Galaxy S5, assorted colours, qty 3, untested, inspection
CMI heavy duty case for iPhone 5/5S, assorted colours, qty 4, untested, inspection recommended
(sold as lot)
CMI frosted case for Samsung Galaxy S5, assorted colours, qty 3, untested, inspection
CMI clear case for iPhone 5/5S, assorted colours, qty 3, untested, inspection recommended (sold
as lot)
CMI Vertex case for Samsung Galaxy S5, assorted colours, qty 4, untested, inspection
CMI frosted case for iPhone 5C, assorted colours, qty 4, untested, inspection recommended (sold
as lot of 4)
CMI Cover All case for i19500 Galaxy S4, purple, qty 3, untested, inspection recommended (sold
as lot)
CMI assorted styles & colours for iPhone 6, qty 4, untested, inspection recommended (sold per lot
of 4)
CMI Grip case for HTC One, assorted colours, qty 3, untested, inspection recommended (sold as
lot)
CMI Cover All case for i19500 Galaxy S4, blue, qty 3, untested, inspection recommended (sold as
lot)
CMI black case for LG G3, qty 2, untested, inspection recommended (sold as lot)
CMI 2 in 1 case for iPhone 6, assorted colours, qty 3, untested, inspection recommended (sold as
lot)
Smart protection Double Dip case for HTC One (M8), grey, red & blue, qty 3, untested, inspection
Belkin Air Project Grip Extreme for Galaxy S5, assorted colours, qty 5, untested, inspection
Wetsuit, Dog & Bone case for iPhone 5/5S, qty 3, untested, inspection recommended (sold as lot)
Casemate Barely There for IPhone 5, assorted colours, qty 4, untested, inspection recommended
(sold as lot)
Naztech The Vault case for iPhone 5, untested, inspection recommended
Lifeproof case for iPhone 5C, assorted colours, qty 2, untested, inspection recommended (sold as
lot)
Apple iPad Air Smart Cover, MF053FE/A, black, qty 2, untested, inspection recommended (sold
as lot)
CMI Apple iPad Air Binder case, black, qty 2, untested, inspection recommended (sold as lot)
Cellnet car charger with micro USB cable, qty 6, untested, inspection recommended (sold as lot)
95
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
XOOPAR Boy Bluetooth speaker, pink in box, untested, inspection recommended
Apple iPhone 5C case, assorted colours, qty 5, untested, inspection recommended (sold as lot)
CMI Universal stereo headphones, hands free, qty 4, untested, inspection recommended (sold as
lot)
Bury Tech Active cradle , Universal, untested, inspection recommended (SH)
Apple Lightning cable & lightning to 30 pin adapter, qty 2, untested, inspection recommended
(sold as lot)
Apple ear pods with remote & mic, MD827FE/A in box, untested, inspection recommended
Noise hush NX40 stereo headset in box, untested, inspection recommended
Amagic Magskin Ultra Slim pocket power, untested, inspection recommended
Bury Tech Active cradle for iPhone 5, untested, inspection recommended (SH)
Motorola Universal car phone holder, untested, inspection recommended (SH)
Force Sync & charger, retractable USB cable, micro USB, untested, inspection recommended
Quad USB car charger, qty 2, untested, inspection recommended (sold as lot)
Backbeat Fit wireless headphones by Plantronics, in box, untested, inspection recommended
Telstra USB car charger, micro USB cable in box, untested, inspection recommended
Jackhead portable stereo headphones, red/black, untested, inspection recommended
Power plug Premium in vehicle charger with micro USB, qty 3, untested, inspection recommended
(sold as lot)
Jackhead portable Bluetooth speaker/media player, untested, inspection recommended (sold per
each)
each)
each)
each)
35IXT Jelly case for iPhone 6, assorted colours, qty 3, untested, inspection recommended (sold
as lot)
351XT Jelly Case for iPhone 6 Plus, assorted case, qty 3, untested, inspection recommended
(sold as lot)
351XT Pureflex case for iPhone 6 Plus, assorted colours, qty 3, untested, inspection
351XT Pureflex case for iPhone 6 Plus, assorted colours, qty 3, untested, inspection
351XT Book Wallet for iPhone 6, assorted colours, qty 5, untested, inspection recommended (sold
as lot)
351XT Premium Leather wallet for iPhone 6, assorted colours, qty 2, untested, inspection
351XT Universal Sports armband, black, untested, inspection recommended
Phone cases, bag of assorted styles & colours, untested, inspection recommended (sold as lot)
Phone cases, bag of assorted styles & colours, untested, inspection recommended (sold as lot)
Screen protectors, bag of assorted models & tyres, untested, inspection recommended (sold as
lot)
Screen protectors, bag of assorted 35IXT, untested, inspection recommended (sold as lot)
Digitech wireless HDMI A/V sender set, untested, inspection recommended (SH)
96
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
Astone MP-310DT HD media player, untested, inspection recommended (SH)
Samsung DVD-D530 DVD player with AV & HDMI cables, untested, inspection recommended
(SH)
Distrakted 15" Laptop carry bag, black, new, untested, inspection recommended (sold per each)
Distrakted 15" Laptop carry bag, black, new, untested, inspection recommended (sold per each)
Epson WF-3540 multi function printer, untested, inspection recommended (SH)
Wacom Intuos Pen & touch tablet CTH480/S1-C, untested, inspection recommended (sold per
each)
Wacom Intuos Pen & touch tablet CTH480/S1-C, untested, inspection recommended (sold per
each)
Nextivity Cell-Fi RS250WU Window unit, No PSU, untested, inspection recommended (SH)
Digitech A/V HDMI 4 way splitter, ex demo, as is, untested, inspection recommended (SH)
Nextivity Cell-Fi RS250CU coverage unit, untested, inspection recommended (SH)
Miscellaneous 2 port HDMI splitter, as is, untested, inspection recommended (SH)
Symbol USB barcode scanner, ex demo, as is, untested, inspection recommended (SH)
Sansai USB Hub & card reader, as is, untested, inspection recommended (SH)
Telstra T-box in box, untested, inspection recommended
Computer system, Cooler Master tower, Benq Senseye monitor, keyboard, mouse, Intuous pad &
cables, HD removed, as is, untested, inspection recommended (SH)
LG Flatron IPS235, LED monitor including cables, as is, untested, inspection recommended (SH)
LG Flatron IPS235, LED monitor including cables, as is, untested, inspection recommended (SH)
LG 42" Smart TV, 42LB5820 with manual & remote, wall mountable, no stand, as is, untested,
Wooden stool, dark wood, approx 60cm tall, inspection recommended (SH)
Timber wooden stools, dark wood, approx 75cm tall, inspection recommended (SH) (sold price per
each)
97
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY
189
190
191
192
193
Lounge Black low set 2 seater couch, inspection recommended (SH)
Lounge Black low set 2 seater couch, inspection recommended (SH)
Coffee table, white, approx 1.5m x .7m x .5m, inspection recommended (SH)
Bar Fridge, Westinghouse, 100L mini fridge, untested, inspection recommended (SH)
Jackhead JH500 stereo headphones with volume control, in box, untested, inspection
recommended
Thank you & good luck from the team at
Lloyds Auctioneers & Valuers!
98
ALL GOODS TO BE
COLLECTED
12 NOON TUESDAY

Big Brand Tools Insurance Claim Online Auction THIS IS AN

Transcription

Similar documents

JSS Tradequip AD 1.indd

QX600-L™ Brochure

A nossa participação em concursos públicos da União Europeia

October 30, 2000

IWt GEORGE STASTNY - Diocese of Durham

CW PDF

Global Energy Management Corp.

to see the brochure - Real Estate Showcase

Digital Edge Subsea EdgeDVR-1HD-1SD

Operations Support