catalogue and technical features

A current and timeless surface,
an ancient sign of nature turning
matter into stone.
Gold
Fossil
White
Ancient
Grey
Stone
e
Brown
Petrif ied
Size 6”x24” 15x60,3
2
3
G r ey
4
S t o n e
5
Grey Stone
6
7
Grey Stone
6”x24”
15x60,3
8
9
B r o w n
10
P e t r i f i e d
11
Brown Petrif ied
12
13
Brown Petrif ied
6”x24”
15x60,3
14
15
G o l d
16
F o s s i l
17
Gold Fossil
18
19
Gold Fossil
6”x24”
15x60,3
20
21
W h i t e
22
A n c i e n t
23
White Ancient
24
25
White Ancient
6”x24”
15x60,3
26
27
LEED CREDITS
THE LEADERSHIP IN ENERGY AND ENVIRONMENTAL DESIGN
100% reuse of unfired tiles
Crude waste generated by the process is reintegrated in the
production cycle with no costs for the environment.
This contributes to the safeguard of natural resources.
100% recycling of the industrial waste (fired tiles)
All the waste-fired tiles generated by the process are recycled
from the building industry as inert supports
for road subsoils and foundations, reducing the use of new natural
resources.
100% Recycling of non ceramic waste
100% of non ceramic waste is differentiated and recycled in other
production cycles.
100% water recycling
The water used in the production process is 100% recycled.
The water demand is reduced by about 60% by this mean. No
industrial water is discharged in the ecosystem.
Low emissions in the atmosphere
Panaria complies strictly to Italian standards with a very small
amount of gas emissions in the atmosphere.
The high quality of the technology used keeps our emissions 10
times inferior the allowed limits (cfr Post-Kyoto Protocol
negotiations on greenhouse gas emissions).
High reduction of methane consumption (-25%)
Methane consumption is highly reduced (-25%) by the use of up to
date technologies and customized installations.
Safety requirements: “Antislip” properties
)/$6+%$&.KDVJRW§$QWLVOLS¨SURSHUWLHV$670&6&2)á
0.60), in order to provide the highest safety and quality of life to
those who both live and design the buildings.
Safety requirements: No fire reaction
Panaria tiles are totally flameproof, they withstand the destructive
action of fire, they do not promote flame spread and, on contact
with flames, do not produce either smoke or toxic fumes: therefore
they are classified in Class A1fl and A1 (no reaction to fire) from
the EU Decision 96/60/CE.
100% recyclable Panaria packing material
Panaria packing material is 100% recyclable (carton boxes, plastic
packaging materials, wooden pallets, straps, etc..).
28
LEED CREDITS
PANARIA Ceramica is a member of the U.S. Green Building Council: this is an organisation that promotes buildings that are environmentally friendly, profitable and healthy places to live and work in.
SS CREDIT 7.1 - HEAT ISLAND EFFECT / NON ROOF (NC, CI, CS, SCHOOLS LEED Rating Systems):
1 LEED POINTLVJUDQWHGIRUWKHXVHRIKDUGVFDSHPDWHULDOVZLWK65,á
FLASHBACK DOES NOT CONTRIBUTE TO CHANGE THE ENERGY BALANCE OF THE
ENVIRONMENTS WHERE THEY ARE INSTALLED.
It does not produce any Urban Heat Island Effect, thanks to its very good physical properties, i.e. Solar
5HIOHFWDQFH,QGH[65,á
EA CREDIT 1 - OPTIMIZE ENERGY PERFORMANCE (NC, CI, CS, SCHOOLS LEED Rating Systems)
THE THERMAL CONDUCTIVITY ƪ OF FLASHBACK porcelain tiles is 0.75 Btu/ft h °F (1,3 Watt/m°K or
1,1 Kcal/m h °C). For this reason it is ideal for heating floor systems and external cladding.
MR CREDIT 2 - CONSTRUCTION WASTE MANAGEMENT (NC, CI, CS, SCHOOLS LEED Rating Systems):
2 LEED POINTS are granted if at least 75% of the weight of raw materials – tiles and packing - will be
recycled. FLASHBACK TILES and their PACKING MATERIAL (carton boxes, plastic packaging materials,
wooden pallets, straps, etc..) ARE 100% RECYCLABLE. The management of the waste on the building site
is also easier because the quantity of waste is very small (weight of packaging is around 2-3% of weight of
total material).
MR CREDIT 4 - RECYCLED CONTENT (NC, CI, CS, SCHOOLS LEED Rating Systems): 2 LEED POINTS
DUHJUDQWHGLIWKHSRVWFRQVXPHUZDVWH×SUHFRQVXPHUZDVWHáRIWKHWRWDOUDZPDWHULDOV
based on cost. FLASHBACK porcelain tiles are produced with 40% OF PRE-CONSUMER RECYCLED
materials.
MR CREDIT 5 - REGIONAL MATERIALS (NC, CS, SCHOOLS LEED Rating Systems): 2 LEED POINTS
are granted if the use of local raw materials is equal to 20% of the total materials value, based on cost.
• These credits are applicable for buildings constructed within 500 miles (804,5 km) from the production
site of Lawrenceburg, Kentucky - USA.
• The % contribution based on cost of FLASHBACK tiles to a single LEED project is calculated based on
the geographical position of the construction site.
MR CREDIT 5 - REGIONAL MATERIALS (CI LEED Rating System only):
• 1 LEED POINT: these credits are applicable for buildings constructed within 500 miles (804,5 km) from
the production site of Lawrenceburg, Kentucky - USA.
• 2 LEED POINTS: meet the previous criterion requirement and use a minimum of 10% of the combined
value of construction and Division 12 (Furniture) materials and products extracted, harvested or
recovered, as well as manufactured, within 500 miles of the LEED project.
IEQ Credit 4.1 - LOW EMITTING MATERIALS, ADHESIVES AND SEALANTS (NC, CI, CS, SCHOOLS
LEED Rating Systems): 1 LEED POINT is granted if all adhesives and sealants used on the interior of the
building comply with SCAQMD Rule #1168 (VOC limit of ceramic adhesives not more than 65 g/l less water).
IEQ CREDIT 4.3 - LOW EMITTING MATERIALS, FLOORING SYSTEMS (NC, CI, CS, SCHOOLS LEED
Rating Systems): 1 LEED POINT is granted if all flooring complies with the requirements indicated in IEQ
Credit 4.3 Section. FLASHBACK tiles obtain 1 LEED point because they do not contain any Volatile Organic
Compounds VOC (see LEED 2009 NC, CI, CS, SCHOOLS Rating Systems).
IEQ CREDIT 4.6 - LOW EMITTING MATERIALS, CEILING AND WALL SYSTEMS (SCHOOLS LEED
Rating System only): 1 LEED POINT.
FLASHBACK tiles obtain 1 LEED point because they do not contain any Volatile Organic Compounds VOC
(see Addenda of LEED Reference Guide for Green Building Design and Construction, 2009 Edition).
ID CREDIT 1 - INNOVATION IN DESIGN: 1-5 LEED POINTS for NC, CI and CS, 1-4 LEED POINTS for
SCHOOLS:
• “EXEMPLARY PERFORMANCES” MR CREDIT 2 - CONSTRUCTION WASTE MANAGEMENT:
1 LEED POINT may be earned if at least 95% by weight of the Raw Materials - material and packing will be recycled. FLASHBACK tiles and their packing material (carton boxes, plastic packaging materials,
wooden pallets, straps, etc..) are 100% recyclable.
• “EXEMPLARY PERFORMANCES” IEQ CREDIT 4.6 - LOW EMITTING MATERIALS, CEILING AND
WALL SYSTEMS: 1 LEED POINT may be earned for NC, CI, CS LEED Buildings. No traces of VOC
(Volatile Organic Compounds) are present in FLASHBACK tiles (see Addenda of LEED Reference Guide
for Green Building Design and Construction, 2009 Edition).
RP CREDIT 1- REGIONAL PRIORITY (NC, CI, CS, SCHOOLS LEED Rating Systems):
1-4 LEED POINTS Between 1 and 4 credits can be obtained, of the 6 Regional Priority credits identified by
the USGBC regional councils and chapters, if the project has an environmental importance for the region,
where it is being constructed. A database of Regional Priority credits and their geographic applicability is
available on the USGBC website www.usgbc.org.
EBOM LEED RATING SYSTEM - EXISTING BUILDINGS OPERATIONS AND MAINTENANCE
The cleaning and maintenance procedures on PANARIA Ceramica’s general catalogue can help obtain the
following LEED credits.
SS CREDIT 7.1 - HEAT ISLAND REDUCTION (NON ROOF): 1 LEED POINT is granted if a maintenance
program is organized, that ensures the surfaces are cleaned at least every 2 years to maintain a good
reflectance.
IEQ 3.1 - GREEN CLEANING, HIGH PERFORMANCE CLEANING PROGRAM: 1 LEED POINT.
IEQ 3.3 - GREEN CLEANING, PURCHASE OF SUSTAINABLE CLEANING PRODUCTS AND
MATERIALS: 1 LEED POINT
MR 3 - SUSTAINABLE PURCHASING, FACILITY ALTERATIONS AND ADDITIONS: 1 LEED POINT
is granted if the purchases contain at least 10% post-consumer waste and/or 20% pre-consumer waste
material. FLASHBACK tiles are produced with 40% of pre-consumer recycled materials.
NC = LEED 2009 for New Construction; CI = LEED 2009 for Commercial Interior; CS = LEED 2009 for
Core and Shell Development; SCHOOLS = LEED 2009 for Schools; EBOM = LEED 2009 for Existing
Buildings Operations and Maintenance.
A dedicated scoring card is available, as an effective tool to calculate the LEED points involved,
depending on the product used and combined with the whole project features, granting extra points
when its distance from the production site of the tile lays within 500 miles.
29
T e c h n i c a l
f e a t u r e s
ANSI A 137.1 (GLAZED PORCELAIN TILE - P1 CLASS) - ISO 13006-G (BIa-GL) - EN 14411-G (BIa-GL)
RESISTANCE
TO TRAMPLING WEAR
STAIN
RESISTANCE
ASTM C1027
GOLD FOSSIL
BROWN PETRIFIED
5
4
Concept & Design:
Silvia Stanzani
MKTG Panaria
ASTM C1378
RESISTANT
Photo:
Punto Immagine
CHEMICAL
RESISTANCE
ASTM C650
RESISTANT
Print:
Graf iche dell’Artiere
MODERATE VARIATION
ANSI A137.1
V3
P a c k i n g s
30
WHITE ANCIENT
GREY STONE
SIZES
PIECES
BOX
WEIGHT
BOX
(KG)
6”X24”
15x60,3
16
33,04
a n d
January 2014
w e i g h t s
SQM
BOX
LM
BOX
BOXES
PALLET
WEIGHT
PALLET
(KG)
SQM
PALLET
1,480
-
32
1057,28
47,36
Via Panaria Bassa, 22/A - 41034 Finale Emilia (Modena) - Italy
tel. +39 0535 95111 - fax +39 0535 90503
[email protected] - www.panaria.it