Bonderite® flex process

Transcription

Bonderite® flex process
Click Here to Request
More Information about
Henkel Automotive
Bonderite® flex process
Henkel’s BONDERITE® Flex Process enables vehicle lightweighting by processing up to 85 percent aluminum.
A standard zinc phosphate coating (BONDERITE® M-ZN 2798™) is applied on cold rolled steel and zinc-coated
substrates, while a zirconium-based coating (BONDERITE® M-PT 54 NC™) is applied on the aluminum substrates.
Easily integrated into existing production lines without cost-intensive modifications, the zirconium-based
pretreatment for aluminum provides flexible paint shop operation, while offering a variety of benefits,
including:
• Excellent corrosion performance on aluminum substrates without zinc phosphate
• Spray or immersion applications in the BONDERITE® M-PT 54 NC™ stage
• Operating ambient temperature in the BONDERITE® M-PT 54 NC™ stage
BONDERITE Flex Process
®
Conveyor Travel Direction
Heated
Ambient
BONDERITE
C-AKT51™/C-ADT51-S™
(Alkaline Cleaner)
®
WATER
RINSES
BONDERITE
M-AC ZL™
Heated
®
BONDERITE M-ZN 2798
(Zinc phosphate coating
on cold rolled steel and
galvanized steel)
®
Ambient
™
WATER RINSES
BONDERITE®
M-PT 54 NC™
(Zirconium-based
coating for aluminum)
DI/RO RINSES
Click Here to Request
More Information about
Henkel Automotive
Zirconium oxide provides solutions to the limitations a traditional zinc phosphate presents
when coating aluminum.
Zinc phosphate coating on aluminum
Zirconium oxide coating on aluminum
25 percent aluminum content
85 percent aluminum content
Excessive sludge generation
High filtration required
Decrease in sludge generation by as much
as two-thirds
Standard filtration
High bath agitation (4 to 6 turnovers per hour)
Standard bath agitation
High fluoride additive level
Reduced fluoride additive level
Reduced process control
Improved process control
Lower gloss appearance
Higher gloss appearance achievable
after electrocoat
M-PT 54 NC™ zirconium oxide
coating on aluminum substrate
(left) results in excellent corrosion
protection while improving
overall paint appearance.
Traditional zinc phosphate coating (above)
For more information, visit www.henkelna.com/lightenup.
Henkel Corporation
32100 Stephenson Highway
Madison Heights, MI 48071
866.332.7024
www.henkelna.com/automotive
@HenkelAuto_NA
Except as otherwise noted, all marks used are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere. ® = registered in the U.S. Patent and Trademark Office.
© Henkel Corporation, 2013. All rights reserved. 10125/LT-6668 (3/13)