Sentry Wireless Headphone Instructions. Please use the

Sentry Wireless Headphone Instructions. Please use the images
contained below along with these instructions to setup the device.
1) Insert 2 AAA batteries into the battery compartment in the base
of transmitter unit and 2 AAA batteries into the headphones.
2) Connect source audio (your TV, Mp3 player, radio, or other audio
device) using either either the RCA cables or included 3.5MM
audio cable connected to the 3.5MM Source Audio jack on base
unit)
3) Turn the base unit on.
4) Press play on the source audio device or verify the audio is on. (TV
volume not muted, mp3 player playing, radio on, etc)
5) Turn the headphones on by rotating the On/Off volume wheel.
The power indicator light should glow red when the unit is on.
6) Press the reset button.
7) Press the FM Scan button once.
8) You should now hear the audio through your headphones.
To listen to FM radio instead of the source audio turn the transmitter
unit off and press the FM scan button to scan through available FM
radio stations. Once you wish to reconnect the base unit reset the
device by clicking the reset button then FM scan button once.
Turn off the device when you are not using it to conserve power. It is
recommended to use rechargeable AAA batteries if the unit will be
used often.