Dunalino 01 - K Smith Equine Creations

Dunalino1 (Light Sooty Dunalino)
Sample model horse was prepped with Krylon white primer
Number of pigment layers:
Dunalino1 (Light Sooty Dunalino)
Layer #
1-3
Earth Pigment Color # of Layers Notes:
Base color
Pigment 31b
3
Solid over the horse.
4
Shading
Pigment 46b
1
Shade over the topline, center sides of the rump,
belly and underside, front of the shoulders, neck,
head and leg points.
5
Shading
Pigment 15b
1
Shade the same as previous layer.
Shade the leg points, upper part of the neck along
the mane and the head as desired. You can also
shade other areas lightly as desired.
6-7
Shading
Pigment 32
2
On the second layer, shade only the leg points if
needed.
—
Other
Black Iron Oxide
1
Shade the muzzle lightly and shade gender area.
—
On a paper plate, mix approximately 12 drops of
Americana Bleached Sand and 2 drops of Americana Fawn. The paint color should match the lightest color on the mane. Use the reference photos
provided. Base color the mane and tail and then
matte spray.
—-
Mane and
Tail
See Notes
—-
Other
Brown Ocher
—-
Mane and
tail
Italian Umber &
Pigment 15 b
1
With a small 10/0 or 5/0 paint brush, use this
pigment color to paint a dorsal stripe and leg
barring.
Use the reference photos to help detail the tail.
Shade the tail with Italian Umber and at the base
of the tail, shade with Pigment 15b
For the mane, shade lightly as desired.
1
Matte spray.
With a flat paint brush or small round paint brush,
use the pigment in the tail grooves as desired.
Matte spray to finish.
Tail
Vine Black
1
Reference Photos
Reference Photos
Reference Photos
Reference Photos
Reference Photos