ICF-CD873 - Electronica.ro

ICF-CD873
SERVICE MANUAL
US Model
Canadian Model
AEP Model
Australian Model
Model Name Using Similar Mechanism
CFD-550
Optical Device Name
KSM-213BAN
Optical Pick-UP Name
KSS-213B
SPECIFICATIONS
FM/AM CD CLOCK RADIO
MICROFILM
SECTION 1
SERVICING NOTES
TABLE OF CONTENTS
1.
SERVICING NOTE .................................................. 2
2.
GENERAL ................................................................... 4
3.
DISASSEMBLY ......................................................... 6
4.
POWER CORD SETTING ................................... 8
5.
ELECTRICAL ADJUSTMENTS ......................... 9
Tuner Section .................................................................. 9
CD Section ...................................................................... 10
Main Clock Section ......................................................... 12
6.
DIAGRAMS
6-1.
6-2.
6-3.
6-4.
6-5.
6-6.
6-7.
6-8.
Block Diagram – CD Section – .....................................
Block Diagram – TUNER Section – .............................
Block Diagram – MAIN Section – ................................
Printed Wiring Board – MAIN Section – ......................
Schematic Diagram – MAIN Section – .........................
Schematic Diagram – POWER SUPPLY Section – ......
Printed Wiring Board – POWER SUPPLY Section – ...
IC Pin Function Description ...........................................
7.
EXPLODED VIEWS ................................................ 43
8.
ELECTRICAL PARTS LIST ............................... 47
15
17
19
23
27
32
35
41
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microampers.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate lowvoltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery
operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A)
To Exposed Metal
Parts on Set
0.15 µF
1.5 k Ω
AC
voltmeter
(0.75 V)
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK ! OR DOTTED
LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
This appliance is classified as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT MARKING is located on
the rear exterior.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE !
SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE
DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ
DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES
NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
–2–
MODEL IDENTIFICATION – Rear View –
S MODEL NO.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
ICF-CD873
The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
MADE IN MALAYSIA
US, Canadian models: AC: 120 V 60 Hz 20 W
Other models: AC: 220 – 230 V 50 Hz 20 W
HOW TO CHANGED THE CERAMIC FILTERS
This model is used two ceramic filters of CF2 and CF3.
You must used same type of color marked ceramic filters in order
to meet same specifications.
Therefore, the ceramic filter must changed two pieces together
since it’s supply two pieces in one package as a spare parts.
CF2
mark
CF3
Mark
Center frequency
red
10.70 MHz
blue
10.67 MHz
orange
10.73 MHz
black
10.64 MHz
white
10.76 MHz
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.
CHUCK PLATE JIG ON REPAIRING
On repairing CD section, playing a disc without the CD lid, use
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be damaged by heat.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
1. Open the CD lid.
2. Turn on S424 as following figure.
3. Confirm that the laser diode emission while observing the objecting lens. When there is no emission, Auto Power Control
circuit or Optical Pick-up is broken.
Objective lens moves up and down once for the focus search.
Insert a precision
screwdriver and
push S424.
laser diode
emission
–3–
SECTION 2
GENERAL
–4–
This section is extracted from
instruction manual.
–5–
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
Upper cabinet
section
Set
CD lid assy
Main board section
Optical pick-up section
Note: Follow the disassembly procedure in the numerical order given.
UPPER CABINET SECTION
2 upper cabinet section
3 two flat wires
(CN201, 202)
4 connector
(CN204)
1 three screws
(P3 × 14)
1 five screws
(P3 × 14)
3 screw
(B3 × 10)
CD LID ASSY
4 damper
5 spring
(CD open)
2 Open the CD lid assy.
7 Remove the CD lid
assy.
1 Pull the button (open).
6 two bosses
–6–
MAIN BOARD SECTION
4 Open the CD lid.
5 screw
(B3 × 10)
3 Pull the button (open).
1 twelve
claws
8 flat wire
(CN101)
8 flat wire
(CN402)
2 net assy
7 main board
section
1 two claws
6 four screws
(P3 × 14)
6 three screws
(P3 × 14)
OPTICAL PICK-UP SECTION
3 CD chassis
2 claw
7 optical pick-up
section
6 two screws
(PWH2.6 × 10)
6 two screws
(PWH2.6 × 10)
4 flat wire
(CN501)
5 connector
(CN502)
1 screw
(BTP3 × 8)
–7–
SECTION 4
POWER CORD SETTING
Set the power cord as illustrated below, then install the lower cabinet section.
Power Cord
lower cabinet section
–8–
SECTION 5
ELECTRICAL ADJUSTMENTS
TUNER SECTION
AM IF ADJUSTMENT
0 dB=1 µV
Adjust for a maximum reading on level meter
[AM]
Setting:
Function
: RADIO
Band switch : AM
AM RF signal
generator
T1
450 kHz
AM FREQUENCY COVERAGE ADJUSTMENT
Adjustment Part Frequency Display Reading on Digital Voltmeter
Put the lead-wire
antenna close to
the set.
level meter
L4
530 kHz
2.8 V
Confirmation
1,710 kHz
9.5V
32 Ω
+
–
set
30% amplitude
modulation by
400 Hz signal
Output level: as low as possible
AM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter
2 jack (J301)
0.01 µF
580 kHz
1,490 kHz
FM FREQUENCY COVERAGE ADJUSTMENT
[FM]
Setting:
Function
: RADIO
Band switch : FM
FM RF signal
generator
L3
CT2
Adjustment Part Frequency Display Reading on Digital Voltmeter
MAIN board
TP12 (FM IN)
2.1 V
108 MHz
8.5 V
Adjust for a maximum reading on level meter
32 Ω
22.5 kHz frequency
deviation by 400 Hz
signal
Output level: as low as possible
87.5 MHz
FM TRACKING ADJUSTMENT
level meter
+
–
set
L2
Confirmation
L1
87.5 MHz
CT1
108 MHz
2 jack (J301)
Adjustment Location: MAIN board (See page 11)
FM VCO Adjustment
Setting:
digital voltmeter
FM RF SSG
MAIN board
TP53 (VT)
MAIN board
TP12 (FM IN)
100 k Ω
0.01 µF
set
• Repeat the procedures in each adjustment several times, and the
frequency coverage and tracking adjustments should be finally
done by the trimmer capacitors.
• Remove FM antenna in FM adjustments.
Carrier frequency: 98 MHz
Modulation: 400 Hz, 30% FM modulation
Output level: 0.1 V (100 dB)
Procedure:
1. Connect the frequency counter to TP7, 8 as shown the figure
below.
2. Tune the set to 98 MHz.
3. Adjust RV1 for 76 kHz reading on the frequency counter.
Specified Value: 75.95 to 76.05 kHz
frequency counter
MAIN board
TP8 (VCO)
1 µF
+
33 k Ω
+
–
TP7 (+B)
Adjustment Location: MAIN board (See page 13)
–9–
CD SECTION
Focus Bias Adjustment
This adjustment is to be done when the optical block is replaced.
Note:
Tracking Balance Adjustment and Tracking Gain Adjustment are
done automatically in this set.
Connection:
oscilloscope
(AC range)
TEST MODE
1. Press the CD LID OPEN/CLOSE DET switch (S424) on the
PUSH SWITCH board.
2. Under standby condition (when the clock appear in the display), short the BP (CD TEST AUTO).
Note: If the power is supplied to the microprocessor once, it is backed up
for 3 minutes, therefore the TEST mode will not be activated within
3 minutes even if the power is turned on again. In this case, short
instantaneously the BP (CD TEST MANUAL).
3. Press the ^ key, and the focus search is repeated.
At this time, check that the optical pick-up objective lens moves
smoothly without a sticking or noise.
4. Load the test disc (YEDS-18: Part No. 3-702-101-01), and perform automatic adjustment after the focus search succeded.
5. After automatic adjustment is finished, move the sled motor
to the center. At this time, keep pressing the + and =
keys to confirm that optical pick-up moves smoothly via most
inside track → most outside track → most inside track without a sticking or noise.
6. Confirm the traverse waveform.
7. Press the [WAKE UP TRACK] key.
8. The tracking servo and the sled servo are turned on, the mute
is cancelled.
9. Playback the 2nd track.
10. Adjust the RF and jitter waveforms.
MAIN board
TP503 (RF)
TP504 (VREF)
+
–
Adjustment Procedure:
1. Connect the oscilloscope to TP504 (VREF) and TP503 (RF)
on the MAIN board.
2. Insert the test disc (YEDS-18: Part No.3-702-101-01) and press
^ key to play.
3. Move the optical pick-up to the music area on the disc to enable easy visibility of the eye pattern by + or = key
pressing.
4. Adjust RV501 so that the oscilloscope waveform is as shown
in the figure below (eye pattern).
A good eye pattern means that the diamond shape (≈) in the
center of the waveform can be clearly distinguished.
• RF signal reference waveform (eye pattern)
VOLT/DIV: 0.2 V
TIME/DIV: 500 ns
1.3 ± 0.5 Vp-p
Connecting points: MAIN Board (See page 13)
When observing the eye pattern, set the oscilloscope
for AC range and raise vertical sensitivity.
Adjustment Location: MAIN Board (See page 13)
– 10 –
Focus Gain Adjustment
A frequency response analyzer is necessary in order to perform
this adjustment exactly.
However, this gain has a margin, so even if it is slightly off, there
is no problem. Therefore, do not perform this adjustment.
Focus gain determines the optical pick-up follow-up (vertical and
horizontal) relative to mechanical noise and mechanical shock
when the 2-axis device operate.
However, as these reciprocate, the adjustment is at the point where
both are satisfied.
• When gain is raised, the noise when the 2-axis device operates
increases.
• When gain is lowered, mechanical shock and skipping occurs
more easily.
• When gain adjustment is off, the symptoms below appear.
Gain
Procedure:
1. Keep the set horizontal.
If the set is not horizontal, this adjustment cannot be performed due to the gravity against the 2-axis device
2. Insert the test disc (YEDS-18) and press the ^ button.
3. Connect the oscilloscope BT (FEO) and TP504 (VREF) on
the MAIN board.
4. Adjustment RV502 on the MAIN board so that the waveform
is as shown in the figure below.
(
)
VOLT/DIV: 100 mV
TIME/DIV: 2 mS
100 mV
0V
Focus
Symptoms
• The time until music starts becomes longer for
STOP → PLAY or automatic selection.
(=, + buttons pressed)
(Normally takes about 2 seconds)
• Incorrect Examples (DC level changes more than on adjusted
waveform)
low
low focus gain
• Music does not start and disc continues to
rotate for STOP → PLAY or automatic
selection.
(=, + buttons pressed)
–
• Sound is interrupted during PLAY.
Or time counter display stops progressing.
–
• More noise during 2-axis device operation
high
VOLT/DIV: 100 mV
TIME/DIV: 2 mS
200 mV
0V
high focus gain
VOLT/DIV: 100 mV
TIME/DIV: 2 mS
The following is a simple adjustment method.
– Primary Adjustment –
Note: Since exact adjustment cannot be performed, remember the positions of the controls before performing the adjustment. If the positions after the primary adjustment are only a little different, return
the controls to the original position.
75 mV
0V
Connection:
oscilloscope
Adjustment Location: MAIN Board (See page 13)
MAIN board
BP (FEO)
TP504 (VREF)
+
–
– 11 –
MAIN CLOCK SECTION
Main Clock Adjustment
Connection:
adjustment
jig
MAIN board
TP (+5 V)
TP401 (4.194 MHz)
TP GND (SHIELD)
+5
IN
GND
frequency counter
OUT
GND
10 : 1 probe
Adjustment jig:
100 k Ω
+5 V
0.5 pF
1 MΩ
47 uF
1 MΩ
100 k Ω
1000 pF
OUT
IN
+
GND
GND
INVERTER
(TC7W04F)
Procedure:
1. Connect the frequency counter as the above figures.
2. Adjust CT401 for 4.2495 MHz reading on the frequency
counter.
Specified Value: 4.2490 to 4.2500 MHz
– 12 –
+
–
Adjustment Location and Connecting Points:
AM Tracking Adjustment
L3
CT2
RV502 Focus Gain Adjustment
RV501 Focus Bias Adjustment
– MAIN BOARD (Component Side) –
L4 AM Frequency Coverage
Adjustment
FM Tracking Adjustment CT1
L1
RV1 FM VCO Adjustment
L2 FM Frequency Coverage
Adjustment
T1 AM IF Adjustment
CT401 Main Clock Adjustment
– MAIN BOARD (Conductor Side) –
TP401
(4.194 MHz)
TP GND
(SHIELD)
C429
+
BP (CD TEST AUTO)
BP (CD TEST MANUAL)
TP7
(+B)
TP (+5 V)
TP12 (FM IN)
TP503 (RF)
TP504 (VREF)
BP (FEO)
TP53 (VT )
– 13 –
TP8
(VCO)
ICF-CD873
SECTION 6
DIAGRAMS
BLOCK DIAGRAM – CD Section –
14
3
RF AMP,
FOCUS/TRACKING
SERVO
IC501 (1/2)
MIRR
AMP
TTL
DEFECT
AMP
IIL
TTL
IIL
IIL
RV501
FOCUS
ERROR
AMP
38
39
F
FE BIAS
F I-V
AMP
E
E I-V
AMP
LASER DIODE
FEO
7
10
AUTOMATIC
POWER CONTROL
Q502
33
LD
LD
AMP
2
FEI
FOCUS PHASE
COMPENSATION
FEO
TRACKING PHASE
COMPENSATION
TAO
22
24
13
23
14
43
LRCKI
54
DIGITAL FILTER &
1 BIT D/A CONVERTER
D/A INTERFACE
INTERNAL BUS
42
BCKI
RPWM
NRPWM
XTAI
XRST
SEIN
DIGITAL
OUT
6
DOUT
XTAO
61
SUB-CODE
PROCESSOR
69
78
XUGF
WFCK
DIGITAL
CLV
CPU INTERFACE
EMPH
GFS
25 26 24 27
4 5
7
LOW-PASS
FILTER
IC301
CD R-CH
77
73
X501
16.933MHz
74
XTSL
CLOCK
21
GENERATOR
CNIN
9 11 10
1
2
3
49
63
A
(Page 19)
60
64
62
51
22 18 19 20
RV502
37
FOCUS
BIAS
44
TEI
13
B+
(CD 5V)
D414
40
DATA, CLOCK, LATCH
CLOCK
B
(Page 18)
PHD
34
41 39 42 32 30 31 44
12
SQSI
CK
5
47
CD L-CH
70
FOK
DATO
15
CLKO
17
XLTO
16
8
C2PO
45
46
XPCK
PD
AMP
LD
PD
SENS
TTL
1
TRACKING TEO
42
ERROR
AMP
EI
XRST
C.OUT
FOCUS
GAIN
OPTICAL PICK-UP
(KSS-213B)
DATA
21
CLK
19
XLT
20
LRCK
44
LPWM
NLPWM
C4M
E
23
BCK
PCMDI
EMPHI
8
25
PCMD
MUTE
SPOA
SPOB
SPOC
9
50
FOK
SBSO
F
FOCUS OK
AMP
FOCUS OK
COMPARATOR
ASYO
EXCK
6
39
ASYI
SCOR
C
B
38
30
EFM
DEMODULATOR
DIGITAL PLL
6
16K
RAM
SCOR
11
36
ASYMMETRY
CORRECTION
DATA
CLOK
XLAT
7
RFI
RF
DATA
CLOCK
XLT
10
PHD2
36
SENS
4
31
MDP
MDS
MON
LOCK
13
RFO
IIL DATA REGISTER
D
A
RF
SUMMING
AMP
+
PD2 I-V AMP
SENS
DETECTOR
SQCK
35
ERROR
CORRECTOR
29 34 31 30
PD1 I-V AMP
PHD1
SQSO
5
FILTER
FILO
CLTV
PCO
FILI
CN501
12
DIGITAL SIGNAL PROCESSOR,
CLV SERVO, D/A CONVERTER
IC502
XLON
MAIN BOARD (1/3)
SERVO AUTO SEQUENCER
6-1.
43 CIN
FOCUS/TRACKING COIL DRIVE,
SPINDLE/SLED MOTOR DRIVE
IC503
2-AXIS
DEVICE
(FOCUS)
(TRACKING)
3
14
27
26
E-F BALANCE
CONTROL
Q501
29 CD ADJ
BP
(CD TEST MANUAL)
T-OUT+
TRACKING
COIL DRIVE
T-OUT–
T-IN
25
DATA 40
R-LAT 37
DATA
LATCH
SYSTEM CONTROLLER
IC401 (1/2)
34 X-RESET
2
15
S424
(CD LID OPEN/CLOSE DET)
DOOR-IN 62
4
13
1
16
18
17
F-OUT+
FOCUS
COIL DRIVE
F-OUT–
F-IN
19
PUSH SWITCH BOARD
BH570
M570
(SLED)
M
M571
(SPINDLE)
M
SLED SERVO
IC501 (2/2)
CN502
1
1
3
2
2
1
5
4
4
3
12
11
SL-OUT+
SLED
SL-OUT– MOTOR DRIVE
SP-OUT+
SPINDLE
SP-OUT– MOTOR DRIVE
SL-IN
SP-IN
3
10
16
SLO
SLED
AMP
SLP
14
14
SP-OUT
SP-IN
15
MUTE
7
S570
(LIMIT)
6
5
7
6
• SIGNAL PATH
MOTOR BOARD
: CD PLAY
05
– 15 –
– 16 –
ICF-CD873
BLOCK DIAGRAM – TUNER Section –
(2/3)
CF3
10.7MHz
ANT1
FM WIRE
ANTENNA
26
FM/AM FRONT-END,
FM/AM DET, MPX
IC1
FM RF
IN
FM
18
FRONT-END
B.P.F.
BPF1
FM/AM
FE OUT
FM
DISCRI
MAIN BOARD
CF2
10.7MHz
16
13
FM
IF IN
L-CH OUT
FM IF AMP/
DISCRI
DECODER
AMP
T1
CT1, L1
FM TRACKING
L1
FM RF
FM RF
20
CT1
TUN IND
TUNING
INDICATOR
AM IF
CF1
450kHz
14
D2
AM
IF IN
R-CH OUT
AM IF AMP/
DET
6
5
TUNER L-CH
C
TUNER R-CH
(Page 19)
12
SWITCH
CT2, L3
AM TRACKING
ST IND
PD2
FM/AM
SELECT
4
VCO
21
7
L2
FM OSC
L4
AM OSC
3
2
1
29
VCO
27
L.P.F.
RV1
FM VCO
D3
D4
(2/2)
15
PLL LPF2
L2
FM FREQUENCY
COVERAGE
PLL LPF1
L4
AM FREQUENCY
COVERAGE
PILOT DET
LPF2
REGULATOR
22
PILOT DET
LPF1
24
D4
(1/2)
1/2
CONTER
BAND SELECT
CT2
PD1
STEREO/MONO
SELECT
FM OSC
AM OSC
AM
FRONT-END
VCC
AM RF
IN
19
REG
L3
AM FERRITE-ROD
ANTENNA
B+
(FM/AM RF/OSC CIRCUIT)
B+
(5V)
LOW-PASS
FILTER
Q50, 51
15
PD1
12
AM IN
FM IN
11
FM/AM PLL
IC50
PHASE
DETECT
MAIN CONTROL
PRESCALLER
P1
OUTPUT
CONTROL
P0
8
7
TUNER ON
D
(Page 19)
2
• SIGNAL PATH
1
X50
75kHz
IF
COUNTER
IF IN
9
CLK
CE
DATA
XIN
XOUT
I/O CONTROL
REGISTER
5 4 3
DATA
CLOCK
LATCH
6-2.
DATA, CLOCK, LATCH
: FM
B
(Page 16)
: AM
05
– 17 –
– 18 –
ICF-CD873
6-3.
BLOCK DIAGRAM – MAIN Section –
VOLUME BOARD
MAIN BOARD (3/3)
CD/TUNER SELECT SWITCH
IC320
A
CD
L-CH/R-CH
11
(Page 16)
C
10
8
5
+
10
IN1
OUT1
2
6
MUTING
Q220
–2
8
6
3
5
1
7
10
R-CH
+
8
Q151, 251
SPEAKER ON
SWITCH
RV302
OUT2
IN2
MEGA BASS
9
1
3
D320
VOL OUT
12
OUT
IN+
MEGA BASS
MUTE
Q321
D417
MEGA BASS ON
DRIVE
Q406
BASS ON 20
2
Q251
KH301
1
3
POWER ON 35
4
BUZZER 49
DATA
CLK
LAT
V-RESET
NAR
46
47
48
50
51
15
14
8
17
22
SO
SI
ST
2
D419 – 421
(LCD BACK LIGHT)
5
CN305
1
2
BASS ON
3
POWER ON
MUTE DRIVE
Q904
POWER ON
4
2
6
(HEADPHONE)
D351
HEADPHONE
MUTE
Q150, 250
HEADPHONE
MUTE DRIVE
Q352
BUZZER
HEADPHONE
BOARD
D350
SPEAKER
SWITCH DRIVE
Q354, 355
V MUTE
B+
(µ 5V)
AOUT 23
HIGH
OUT
8
VOICE
MUTE
Q350, 351
LED BOARD
RST
NAR
IN–
SW
CN303
(1/2)
CSV (COMPUTER SOUND VOICE)
PROCESSOR
IC601
SP301
MEGA BASS
SPEAKER
2
J301
1
(US)
SP201
R-CH FRONT
SPEAKER
2
10
MUTING CONTROL
SWITCH
Q320
Q151
POWER AMP
(FOR MEGA BASS SPEAKER)
IC351
(Page 18)
: TUNER (FM/AM)
VOL IN
3
5
A MUTE 53
SP101
L-CH FRONT
SPEAKER
3
+
2
4
: CD PLAY
4
1
RV301
VOLUME
13
TUNER ON
L-CH
• SIGNAL PATH
CN306
–1
2
TUNER R-CH
6
3
9
1
B+
(CD 5V)
POWER AMP
(FOR FRONT SPEAKER/HEADPHONE)
IC350
CN304
(1/2)
D321
6
CD R-CH
CN301
(2/2)
CN302
(2/2)
7
MUTING
Q120
12
TUNER
L-CH
(Page 18)
D
CN302
(1/2)
1
CD L-CH
TUNER
L-CH/R-CH
CN301
(1/2)
POWER BOARD
Q353
SPEAKER SWITCH
MUTE
D422 – 424
(LCD BACK LIGHT)
MID
POWER AMP
(IC350, 351) B+
LOW
20 BUSY
X601
4.19MHz
CN303
(2/2)
Q403 – 405
LED DRIVE
S422
SOUND LEVEL
Q601, 602
ATTENUATE
SWITCH
CD 6V
MOTOR/COIL
DRIVER (IC503) B+
(US)
KS0 – KS3
KEYRET0 – KEYRET4
13 – 16
63 – 67
17
19
38 36 68
Q405
Q403
HIGH
MUTING CONTROL
SWITCH
Q407
RESET
3
Q602
CD ON
2
Q601
AC IN
XT
ALARM
XT
B+
(µ 5V)
VERSION1
BUSY/COLOR 61
µ 5V
SYSTEM CONTROLLER (IC401),
CSV (IC601) B+
D415
9
+6V
REGULATOR
Q902
6
+5V
REGULATOR
Q901
T901
POWER
TRANSFORMER
RECT
D905 – 908
AC IN
CSV (IC601): US model only
LOW
(EXCEPT US)
Q404
B+
(µ 5V)
D416
S423
D401
D404
BUZZER
D403
(EXCEPT US)
8
6
4
2
2
3
RIVER
D405
KR1
D406
D407
KR4
CN402
4
KR3
55
6
KR2
56
8
KR0
60
10
(US)
KR1
XT1
58
KS3
XT2
59
9
KS2
SHIFT CK
21 – 23
7
KS1
X1
70 – 80, 1 – 10
5
KS0
COM0 – COM2
3
CD B+
SWITCH
Q903
7
CD 5V
(CD SECTION B+)
BIRD
CN401
V MUTE
SEG1 – SEG21
X2
52
D402
BRIGHTNESS
SYSTEM CONTROLLER
IC401 (2/2)
RESET SIGNAL
GENERATOR
IC402
D408 – 411, 418
(Refer to NOTE 1.)
KR0
1
3
5
7
9
KR2
BP
(CD TEST AUTO)
D911
5
S421
RECT
D903, 904
SOUND MODE
X401
32.768kHz
X402
4.194MHz
CN304
(2/2)
CT401
LIQUID CRYSTAL DISPLAY
LCD401
CT401
Q402
Q401
MAIN
CLOCK
KEY MATRIX
S401 – 420
Q401, 402
SHIFT CLOCK
KEY BOARD
NOTE 1
D408
D409
D410
D411
D418
5
KR3
KR4
KR0
KR1
KR2
Australian model
Italian model
US model
Canadian model
All models
5V
TUNER SECTION B+
4
VT B+
RECT
D901, 902
05
– 19 –
– 20 –
LINE
FILTER
LF901
– 21 –
ICF-CD873
• Circuit Boards Location
VOLUME board
MOTOR board
HEADPHONE board
PUSH SWITCH board
KEY board
POWER board
LED board
– 23 –
MAIN board
ICF-CD873
6-5.
SCHEMATIC DIAGRAM – MAIN Section –
• See page 31 for Waveforms.
• See page 37 for IC Block Diagrams.
Note on Schematic Diagram:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
¢
•
: internal component.
• C : panel designation.
Note:
The components identified by mark ! or dotted
line with mark ! are critical for safety.
Replace only with part
number specified.
Note:
Les composants identifiés par
une marque ! sont critiques
pour la sécurité.
Ne les remplacer que par une
piéce por tant le numéro
spécifié.
• U : B+ Line.
• H : adjustment for repair.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : FM
(
) : AM
[
] : CD PLAY
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
• Circled numbers refer to waveforms.
• Signal path.
F : FM
f : AM
J : CD PLAY
• Abbreviation
AUS : Australian model
CND : Canadian model
IT
: Italian model
– 27 –
– 28 –
– 29 –
– 30 –
ICF-CD873
6-6.
SCHEMATIC DIAGRAM – POWER SUPPLY Section –
• See page 40 for IC Block Diagram.
• Waveforms
– MAIN Board –
1 IC601 2 (XT) (RADIO ON mode)
1 V/DIV, 100 ns/DIV
6 IC501 @º (XLT), IC502 !§ (XLT0)
(CD PLAY mode)
5 V/DIV, 200 ns/DIV
!¡ IC502 &£ (XTAI) (CD PLAY mode)
500 mV/DIV, 50 ns/DIV
3.6 Vp-p
1.4 Vp-p
5.2 Vp-p
239 ns
59 ns
2 IC401 %• (X1) (RADIO ON mode)
1 V/DIV, 100 ns/DIV
102 ns
!™ IC50 1 (XOUT) (RADIO ON mode)
500 mV/DIV, 10 µs/DIV
7 IC501 #¡ (RF O), IC502 #§ (RF)
(CD PLAY mode)
200 mV/DIV, 500 ns/DIV
3.7 Vp-p
1.3 Vp-p
1.3 ± 0.5 Vp-p
238 ns
3 IC601 %∞ (XT1) (RADIO ON mode)
1 V/DIV, 10 µs/DIV
13.3 µs
8 IC501 $™ (TEO) (CD PLAY mode)
100 mV/DIV, 500 ns/DIV
3.2 Vp-p
30.5 µs
4 IC501 1 (FEO) (CD PLAY mode)
100 mV/DIV, 50 ns/DIV
Approx.
144 mVp-p
9 IC502 $™ LRCK (CD PLAY mode)
2 V/DIV, 10 µs/DIV
Approx.
136 mVp-p
5 IC501 !ª (CLK), IC502 !¶ (CLK0)
(CD PLAY mode)
5 V/DIV, 10 µs/DIV
5.3 Vp-p
22.8 µs
!º IC502 $§ (BCK) (CD PLAY mode)
2 V/DIV, 200 ns/DIV
5.4 Vp-p
14.3 µs
Note on Schematic Diagram:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
• 5 : fusible resistor.
• C : panel designation.
Note:
The components identified by mark ! or dotted
line with mark ! are critical for safety.
Replace only with part
number specified.
5.3 Vp-p
472 ns
– 31 –
– 32 –
– 33 –
Note:
Les composants identifiés par
une marque ! sont critiques
pour la sécurité.
Ne les remplacer que par une
piéce por tant le numéro
spécifié.
– 34 –
• U : B+ Line.
• Voltages are dc with respect to ground under no-signal
conditions.
no mark : STANDBY
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
• Abbreviation
AUS : Australian model
CND : Canadian model
IT
: Italian model
ICF-CD873
36
35
34
33
32
31
30
29
28
27 26 25
FOK
CC2
16
CC1
FM/AM FE OUT
17
CB
FM GND
20 19 18
CP
FM RF
AM RF IN
FM RF IN
22 21
RF I
FM OSC
REG
23
RF O
AFC
24
RF M
AM OSC
27 26 25
LD
MUTE
28
PHD
VCO
29
PHD 1
MPX REG
30
FM DISCRI
PLL LPF2
CXA1238M-T6
GND
IC1
CXA1782CQ
PHD 2
IC501
• IC Block Diagrams
– MAIN Board –
FM FRONT-END
AM FRONT-END
REGULATOR
LEVEL S
APC
1/2
COUNTER
PD1
1/2
COUNTER
PD2
MONO/STEREO
SELECT
FOK
FM IF/
DISCRI
MPX
REGULATOR
VCO
AM IF/
DET
MIRR
RF IV AMP1
AUTO
BLEND
IIL
24
SENS
TTL
23
C.OUT
22
XRST
21
DATA
20
XLT
19
CLK
18
VCC
17
ISET
16
SL O
15
SL M
14
SL P
13
TA O
DFCT
TUNING
INDICATOR
MUTING
BAND-PASS
MUTE
RIPPLE
FILTER
DECORD
AMP
TTL
RF IV AMP2
TTL
FE BIAS 37
IIL DATA REGISTER
INPUT SHIFT REGISTER
6
7
8
9
10 11 12
13 14 15
PLL LPF1
PILOT DET LPF2
ST IND/VCO CHECK
R-CH OUT
L-CH OUT
VCC
RIPPLE FILTER
AGC AFC1
AGC AFC2
FM IF IN
FE AMP
5
AM IF IN
4
BAND SELECT
3
GND
2
TUNE IND
1
PILOT DET LPF2
ADDRESS DECODER
F
IIL
IIL
OUTPUT DECODER
38
TOG1-3
BAL1-3
F IV AMP
E
39
EI
40
FS1-4
TG1-2
TM1-7
PS1-4
FZC COMP
E IV AMP
BAL 3
BU2614FS
BAL2
BAL1
TE AMP
IC50
VDD1
VDD2
FM IN
AM IN
P2
IF-IN
VEE
16 15
14
13
12 11
10
9
TED 42
ISET
TOG3
IF
COUNTER
TM6
TG1
TOG2
MAIN CONTROL
PRESCALLER
PHASE
DETECT
TRACKING
PHASE
COMPENSATION
LPF COMP
41
TOG1
VSS
PD1
HPF COMP
TM5
TM4
OUTPUT
CONTROL
TEI
TZC
8
46
TM2
DFCT
WINDOW COMP
FS1
TM1
TM7
FS2
ATSC
TDFCT 47
– 37 –
5
6
7
8
9
10
11
12
SRCH
TGU
TG2
FSET
TA M
FDFCT
4
FE M
3
FE O
2
FLB
1
FGD
FS4
48
FEI
VC
TG2
DFCT
F SET
P1
7
P0
6
CD
5
DA
4
CK
3
CE
XIN
XOUT
2
TM3
44
ATSC 45
1
FCS PHASE
COMPENSATION
TZC COMP
LPFI 43
FEO
I/O CONTROL
REGISTER
– 38 –
CXD2508AQ
DTS3
DTS2
RPWM
NRPWM
AVSS2
AVSS3
XTAO
XTAI
AVDD3
AVDD2
LPWM
NLPWM
VDD
DTS1
ZEROL
ZEROR
IC502
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
DIGITAL FILTER &
1 BIT D/A CONVERTER
64 WFCK
63 EMPHI
62 EMPH
DIGITAL
OUT
61 DOUT
60 C4M
CLOCK
GENERATOR
SCOR 1
SBSO 2
EXCK 3
SQSO 4
SQCK 5
MUTE 6
SENS 7
XRST 8
DATA 9
XLAT 10
CLOK 11
VSS 12
13
14
15
16
17
SPOA
SPOB
SPOC
XTSL
XLON
FOK
MON
18
19
20
21
22
23
24
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
CPU
INTERFACE
SUB CODE
PROCESSOR
ERROR
CORRECTOR
16K
RAM
D/A
INTERFACE
SEIN
CNIN
DATO
XLTO
CLKO
59 FSTT
INTERNAL BUS
SERVO
AUTO
SEQUENCER
EFM
DEMODULATOR
DIGITAL
PLL
DIGITAL
CLV
29 30 31 32 33 34 35 36 37 38 39 40
MDP
MDS
LOCK
TEST
FILO
FILI
PCO
VDD
AVSS1
CLTV
AVDD1
RF
BIAS
ASYI
AYSO
ASYE
25 26 27 28
F-NF
F-IN
F-OUT+
24 23 22 21 20
19
18 17
–
+
SP-IN+
16 15
+
–
LEVEL
SHIFT
+
–
–
+
+
–
+
–
+
–
REG.
LEVEL
SHIFT
3
4
5 6
7
8 9
SL-OUT+
SL-IN
SL-NF
REG OUT
REG IN
MUTE
GND
SP-NF
10
11 12 13 14
– 39 –
SP-OUT+
2
SP-OUT–
1
SL-OUT–
MUTE
CONTROL
SP-IN
LEVEL
SHIFT
GND
SP-OUT
LEVEL
SHIFT
SP-IN–
T-NF
25
F-OUT–
T-IN
27 26
VCC
VCC
T-OUT–
28
VREF
T-OUT+
BA5930FP
GND
IC503
ASYMMETRY
CORRECTOR
MNT0
MNT1
MNT3
XROF
C2PO
VSS
RFCK
GFS
XPCK
XUGF
GTOP
BCKI
BCK
PCMDI
PCMD
LRCKI
LRCK
WDCK
IC601 MSM6654A-542GS-KR1 (US model)
24
23
22
21
20
VDD 1
2
3
4
5
6
NC 7
ST 8
XT
XT
NC
CMD
NC
OSC
TIMMING
CONTROLLER
BEEP TONE
GENARATOR
LPF
I/O
INTERFACE
MELODY
GENARATOR
12 BIT
DAC
GND
AOUT
NAR
NC
BUSY
19 NC
18 NC
17 RESET
12
PCM
SYNTHSIZER
17 BIT
ADDRESS
COUNTER
1M BIT ROM
EDITING ROM &
ADDRESS ROM
CONTAINS 22KBIT
17 BIT
MULTIPLEXER
7
10
11
12/PoRT0
13/PoRT1
9
10
11
12
ADPCM
SYNTHESIZER
DATA
CONTROLLER
ADDRESS
&
COMMAND
CONTROLLER
8
16
15
14
13
CH
16/SD
15/SI
14
– POWER Board –
IC350
LA4601N
POP NOISE
PREVENTION
CIRCUIT
TSD
PROTECTOR
REFERENCE
AMP
OUTPUT
AMP
PRE
DRIVE AMP
INPUT
AMP
OUTPUT
AMP
PRE
DRIVE AMP
INPUT
AMP
STANDBY
SWITCH
1 2 3
4
5
6
7
8 9 10
OUT1
GND
OUT2
VCC
FILTER
P.P.
STANDBY
IN2
GND
IN1
RIPPLE
FILTER
– 40 –
6-8. IC PIN FUNCTION DESCRIPTION
• MAIN BOARD IC401 µPD753012AGC-F17-3B9 (SYSTEM CONTROLLER)
Pin No.
Pin Name
I/O
1 to 10
SEG12 to SEG21
O
Segment drive signal output to the liquid crystal display (LCD401)
11, 12
SEG22, SEG23
O
Segment drive signal output terminal Not used (open)
13 to 16
KS0 to KS3
O
Key strobe signal output to the key matrix
17
VERSION1
O
Initialize destination output terminal
18
VERSION2
O
Initialize destination output terminal Not used (open)
19
ALARM
O
Alarm data output terminal Used for the US model only
20
BASS ON
O
Mega bass on/off selection signal output to the mega bass power amplifier (IC351)
“L”: mega bass on
21 to 23 COM0 to COM2
Description
O
Common drive signal output to the liquid crystal display (LCD401)
24
COM3
O
Common drive signal output terminal Not used (open)
25
BIAS
O
Bias output for the liquid crystal display drive
26 to 28
VLC0 to VLC2
—
Terminal for doubler circuit capacitor connection to develop liquid crystal display drive voltage
29
CD ADJ
I/O
At initial mode: Setting terminal for the test mode (manual mode) “L”: manual mode
At normal mode: E-F balance control signal output to the CXA1782BQ (IC501) “H” active
30
CLOCK
O
Serial data transfer clock signal output to the CXD2508AQ (IC502)
31
XLT
O
Serial data latch pulse signal output to the CXD2508AQ (IC502)
32
DATA
O
Serial data output to the CXD2508AQ (IC502)
33
VSS
—
Ground terminal
34
X-RESET
O
System reset signal output to the CXA1782BQ (IC501), CXD2508AQ (IC502) and BA6196FP
(IC503) “L”: reset
35
POWER ON
O
Front side speaker on/off selection signal output terminal “L”: speaker on
36
CD ON
I/O
At initial mode: Setting terminal for the test mode (auto mode) “L”: auto mode
At normal mode: Power on/off control signal output for the CD +5V power supply
“L”: CD power on
37
R-LAT
O
PLL serial data latch pulse signal output to the FM/AM PLL (IC50)
38
AC IN
I
Power failure detection input terminal “L”: power failure, “H”: power on
39
CK
O
At CD mode: Subcode Q data reading clock signal output to the CXD2508AQ (IC502)
At tuner mode: PLL serial data transfer clock signal output to the FM/AM PLL (IC50)
40
DATA
O
PLL serial data output to the FM/AM PLL (IC50)
41
SQSI
I
Subcode Q data (80 bit serial) input from the CXD2508AQ (IC502)
42
SENS
I
Internal status signal (sense signal) input from the CXD2508AQ (IC502)
43
CIN
I
Track jump count detect signal input from the CXA1782BQ (IC501)
44
SCOR
I
Subcode sync (S0+S1) detection signal input from the CXD2508AQ (IC502)
45
AUTO/MANU
I
Setting terminal for the CD adjustment mode (auto mode/manual mode)
“L”: auto mode, “H”: manual mode (fixed at “L”)
46
DATA
O
Serial data output to the CSV (Computer Sound Voice) processor (IC601)
Used for the US model only Except US model: Not used (open)
47
CLK
O
Serial data transfer clock signal output to the CSV (Computer Sound Voice) processor (IC601)
Used for the US model only Except US model: Not used (open)
48
LAT
O
Serial data latch pulse signal output to the CSV (Computer Sound Voice) processor (IC601)
Used for the US model only Except US model: Not used (open)
49
BUZZER
O
Buzzer sound drive signal output terminal
50
V-RESET
O
Reset signal output to the CSV (Computer Sound Voice) processor (IC601) “L”: reset
Used for the US model only Except US model: Not used (open)
51
NAR
I
“H” is input when CSV (Computer Sound Voice) processor (IC601) sends data
Used for the US model only Except US model: Not used (open)
52
V MUTE
O
Voice muting on/off selection signal output terminal “H”: muting on
– 41 –
Pin No.
Pin Name
I/O
Description
53
A MUTE
O
54
VDD
—
55
XT1
I
Sub system clock input terminal (32.768 kHz)
56
XT2
O
Sub system clock output terminal (32.768 kHz)
57
IC
—
Internal connection terminal (connected to power supply)
58
X1
I
Main system clock input terminal (4.194MHz)
59
X2
O
Main system clock output terminal (4.194MHz)
60
SHIFT CK
O
Shift clock output of the main system clock (4.194 MHz)
US model: Busy status monitor input from the CSV (Computer Sound Voice) processor (IC601)
“L”: busy status
Except US model: LCD back light color selection signal output terminal
“L”: amber, “H”: green
Audio line muting on/off selection signal output terminal
“L”: muting on
Power supply terminal (+5V)
“H” active
61
BUSY/COLOR
I/O
62
DOOR-IN
I
CD lid open/close detection switch (S424) input terminal
63
KEYRET0
I
US model: Key return signal input from the key matrix Talk 1 (sound mode is buzzer) is input
when alarm is turned on
Except US model: Key return signal input from the key matrix
64
KEYRET1
I
US model: Key return signal input from the key matrix Talk 2 (sound mode is bird) is input
when alarm is turned on
Except US model: Key return signal input from the key matrix
65
KEYRET2
I
US model: Key return signal input from the key matrix Talk 3 (sound mode is river) is input
when alarm is turned on
Except US model: Key return signal input from the key matrix
66, 67
KEYRET3,
KEYRET4
I
Key return signal input from the key matrix
68
RESET
I
System reset signal input from the reset signal generator (IC402) “L”: reset
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
69
SEG0
O
Segment drive signal output terminal
70 to 80
SEG1 to SEG11
O
Segment drive signal output to the liquid crystal display (LCD401)
– 42 –
“L”: CD lid is closed
Not used (open)
SECTION 7
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they
may have some difference from the original
one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color Cabinet's Color
• Abbreviation
AUS : Australian model
IT: Italian model
CND : Canadian model
(1)
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
• The mechanical parts with no reference number in the exploded views are not supplied.
• Hardware (# mark) list and accessories and
packing materials are given in the last of the
electrical parts list.
The components identified by
mark ! or dotted line with mark
! are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque ! sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
9
UPPER CABINET SECTION
10
8
6
5
A
18
7
3
11
4
A
13
12
#1
#3
#6
#2
2
14
#4
SP101
#1
15
17
#3
#1
#3
16
#6
SP201
1
#3
#3
#3
#3
Ref. No.
Part No.
Description
Remark
1
1
2
2
* 3
X-3377-171-1
X-3377-172-1
3-034-584-01
3-034-584-11
1-673-800-11
NET ASSY (DARK BLUE)
NET ASSY (RED) (IT)
BUTTON (OPEN) (DARK GRAY) (US)
BUTTON (OPEN) (LIGHT GRAY) (CND, IT, AUS)
VOLUME BOARD
4
5
5
6
6
1-790-755-11
3-034-585-01
3-034-585-11
3-034-586-01
3-034-586-11
WIRE (FLAT TYPE) (7 CORE)
KNOB (VOL) (DARK GRAY) (US)
KNOB (VOL) (LIGHT GRAY) (CND, IT, AUS)
KNOB (MEGABASS) (DARK GRAY) (US)
KNOB (MEGABASS) (LIGHT GRAY)
(CND, IT, AUS)
7
7
X-3377-456-1 CABINET (UPPER) ASSY (DARK GRAY) (US)
X-3377-457-1 CABINET (UPPER) ASSY (LIGHT GRAY)
(CND, IT, AUS)
3-034-589-01 WINDOW (CD)
Ref. No.
Part No.
Description
9
9
10
11
12
3-034-579-01
3-034-579-11
3-034-592-01
1-452-732-11
3-910-112-01
LID, CD (DARK GRAY) (US)
LID, CD (LIGHT GRAY) (CND, IT, AUS)
SPRING (CD OPEN)
MAGNET
PLATE, CHUCKING
13
* 14
15
16
17
1-790-756-11
A-3663-291-A
3-034-581-01
3-351-377-01
3-034-588-01
WIRE (FLAT TYPE) (10 CORE)
KEY BOARD, COMPLETE
CHASSIS (BUTTON)
DAMPER
WINDOW (CLOCK) (for DARK GRAY) (US)
17
8
18
SP101
SP201
– 43 –
Remark
3-034-588-11 WINDOW (CLOCK) (for LIGHT GRAY)
(CND, IT, AUS)
3-037-757-01 CUSHON (LID)
1-529-354-11 SPEAKER (6.6cm) (L ch)
1-529-354-11 SPEAKER (6.6cm) (R ch)
(2)
MAIN BOARD SECTION
56
57
not
supplied
58
LCD401
55
53
54
61
59
ANT1
52
52
KSM-213BAN
51
60
#3
Ref. No.
Part No.
Description
* 51
52
53
54
55
1-673-804-11
3-921-725-01
3-910-095-31
3-931-379-01
3-910-116-01
MOTOR BOARD
SCREW (2.6X10), +PWH
RUBBER, VIBRATION PROOF (GREEN)
RUBBER, VIBRATION PROOF (RED)
COVER, CD
56
* 57
* 58
3-034-580-01 CHASSIS (CD)
1-673-802-11 PUSH SWITCH BOARD
1-673-803-11 LED BOARD
Remark
Ref. No.
*
*
*
*
59
60
60
60
60
Part No.
Description
3-034-587-01
A-3683-082-A
A-3683-092-A
A-3683-095-A
A-3683-097-A
HOLDER (LCD)
MAIN BOARD, COMPLETE (US)
MAIN BOARD, COMPLETE (IT)
MAIN BOARD, COMPLETE (CND)
MAIN BOARD, COMPLETE (AUS)
61
1-769-824-11 WIRE (FLAT TYPE) (16 CORE)
ANT1
1-501-907-21 ANTENNA, FM WIRE
LCD401 1-803-590-11 DISPLAY PANEL, LIQUID CRYSTAL
– 44 –
Remark
(3)
LOWER CABINET SECTION
#3
AUS
#3
102
#3
104
103
IT
not
supplied
#3
#2
102
US, CND
SP301
T901
105
102
106
101
108
107
not
supplied
#1
#1
The components identified by
mark ! or dotted line with
mark ! are critical for safety.
Replace only with part number specified.
Ref. No.
Part No.
Description
* 101
* 101
* 101
* 101
! 102
A-3683-083-A
A-3683-094-A
A-3683-096-A
A-3683-098-A
1-555-795-00
POWER BOARD, COMPLETE (US)
POWER BOARD, COMPLETE (IT)
POWER BOARD, COMPLETE (CND)
POWER BOARD, COMPLETE (AUS)
CORD, POWER (IT)
! 102
! 102
* 103
104
105
1-783-817-11
1-790-431-11
1-673-801-11
3-034-582-01
3-035-978-01
CORD, POWER (US, CND)
CORD, POWER (AUS)
HEADPHONE BOARD
COVER (SP)
RUBBER (B)
Remark
Ref. No.
106
106
107
108
SP301
! T901
! T901
! T901
! T901
– 45 –
Part No.
Les composants identifiés par une
marque ! sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Description
Remark
3-034-577-01 CABINET (LOWER) (DARK GRAY) (US)
3-034-577-11 CABINET (LOWER) (LIGHT GRAY)
(CND, IT, AUS)
3-035-977-01 RUBBER (A)
3-368-852-01 FOOT
1-529-355-11 SPEAKER (9.2cm)
1-449-199-11
1-449-200-11
1-449-202-11
1-449-350-11
TRANSFORMER, POWER (US)
TRANSFORMER, POWER (IT)
TRANSFORMER, POWER (AUS)
TRANSFORMER, POWER (CND)
(4)
OPTICAL PICK-UP SECTION
(KSM-213BAN)
152
not supplied
151
153
#5
154
M571
M570
The components identified by
mark ! or dotted line with
mark ! are critical for safety.
Replace only with part number specified.
Ref. No.
Part No.
Description
! 151
152
153
8-848-379-31 OPTICAL PICK-UP KSS-213B
2-626-907-01 GEAR (A)
2-627-003-02 GEAR (B) (RP)
Remark
Ref. No.
154
M570
M571
– 46 –
Part No.
Les composants identifiés par une
marque ! sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Description
2-626-908-01 SHAFT, SLED
X-2625-769-1 GEAR ASSY (MB), MOTOR (SLED)
X-2625-770-2 CHASSIS ASSY (MB), (RP) (SPINDLE)
Remark
HEADPHONE
SECTION 8
ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in the
parts list may be different from the parts specified in the diagrams or the components used
on the set.
• -XX and -X mean standardized parts, so they
may have some difference from the original
one.
• RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
• Abbreviation
AUS : Australian model
CND : Canadian model
IT : Italian model
Ref. No.
Part No.
*
1-673-801-12 HEADPHONE BOARD
*****************
• Items marked “*” are not stocked since they
are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• SEMICONDUCTORS
In each case, u: µ, for example:
uA. . : µA. .
uPA. . : µPA. .
uPB. . : µPB. .
uPC. . : µPC. .
uPD. . : µPD. .
• CAPACITORS
uF: µF
• COILS
uH: µH
Description
Remark
Ref. No.
S401
1-128-551-11 ELECT
22uF
20%
63V
<JACK>
J301
1-568-267-11 JACK (2 (HEADPHONE))
<COIL>
L180
L280
L380
1-410-526-11 INDUCTOR
1-410-526-11 INDUCTOR
1-412-496-51 INDUCTOR
10uH
10uH
4.7uH
<RESISTOR>
R380
1-216-025-00 RES, CHIP
100
1/10W
(US)
R380
1-216-041-00 METAL CHIP
470
5%
1/10W
(EXCEPT US)
R381
1-216-017-00 RES, CHIP
47
5%
1/10W
**************************************************************
5%
A-3663-291-A KEY BOARD, COMPLETE
*********************
*
Part No.
LED
The components identified by
mark ! or dotted line with mark
! are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque ! sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
When indicating parts by reference
number, please include the board.
Description
Remark
< SWITCH >
S402
S403
S404
S405
1-554-937-11 SWITCH, KEY BOARD (VOICE ON/OFF) (US)
(BACK LIGHT GREEN/AMBER) (EXCEPT US)
1-554-937-11 SWITCH, KEY BOARD (ALARM MODE)
1-554-937-11 SWITCH, KEY BOARD (CD PLAY MODE)
1-554-937-11 SWITCH, KEY BOARD (D.S.T. SUMMER T.)
1-554-937-11 SWITCH, KEY BOARD (WAKE UP TRACK)
S406
S407
S408
S409
S410
1-554-937-11
1-554-937-11
1-554-937-11
1-554-937-11
1-554-937-11
S411
S412
S413
S414
S415
1-554-937-11 SWITCH, KEY BOARD (BAND)
1-554-937-11 SWITCH, KEY BOARD (1)
1-554-937-11 SWITCH, KEY BOARD
(TUNE/TIME SET + +)
1-554-937-11 SWITCH, KEY BOARD (3)
1-554-937-11 SWITCH, KEY BOARD (4)
S416
S417
S418
S419
S420
1-554-937-11
1-554-937-11
1-554-937-11
1-554-937-11
1-554-937-11
<CAPACITOR>
C380
KEY
SWITCH, KEY BOARD (ALARM A)
SWITCH, KEY BOARD (ALARM B)
SWITCH, KEY BOARD (CLOCK)
SWITCH, KEY BOARD (TUNE/TIME SET - =)
SWITCH, KEY BOARD (2)
SWITCH, KEY BOARD (5)
SWITCH, KEY BOARD (fl CD)
SWITCH, KEY BOARD (RADIO, SLEEP)
SWITCH, KEY BOARD (OFF, ALARM RESET)
SWITCH, KEY BOARD
(SNOOZE/TIME REPORT) (US)
(SNOOZE/SLEEP OFF) (EXCEPT US)
**************************************************************
< CAPACITOR >
1-673-803-12 LED BOARD
**********
(Included in MAIN BOARD, COMPLETE)
*
C455
C456
C457
C458
C459
1-163-251-11
1-163-251-11
1-163-251-11
1-163-251-11
1-163-251-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
100PF
100PF
100PF
100PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
< DIODE >
D419
8-719-075-78 LED TLYE262 (K51.SOY.P)
D420
8-719-075-78 LED TLYE262 (K51.SOY.P)
D421
8-719-075-78 LED TLYE262 (K51.SOY.P)
(LCD BACK LIGHT)
< CONNECTOR >
(LCD BACK LIGHT)
CN402
1-793-080-11 CONNECTOR, FFC/FPC 10P
D422
< RESISTOR >
R491
R492
R493
R494
R495
1-216-073-00
1-216-073-00
1-216-073-00
1-216-073-00
1-216-073-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
10K
10K
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
D423
D424
– 47 –
(LCD BACK LIGHT)
8-719-056-07 LED SLR-342MC3F (LCD BACK LIGHT)
(EXCEPT US)
8-719-056-07 LED SLR-342MC3F (LCD BACK LIGHT)
(EXCEPT US)
8-719-056-07 LED SLR-342MC3F (LCD BACK LIGHT)
(EXCEPT US)
LED
Ref. No.
MAIN
Part No.
Description
Remark
< RESISTOR >
R483
R484
R485
R486
1-216-041-00
1-216-041-00
1-216-041-00
1-216-025-00
R487
1-216-025-00 RES, CHIP
R488
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
1-216-025-00 RES, CHIP
470
470
470
100
100
1/10W
1/10W
1/10W
1/10W
(EXCEPT US)
5%
1/10W
(EXCEPT US)
1/10W
(EXCEPT US)
**************************************************************
A-3683-082-A
A-3683-092-A
A-3683-095-A
A-3683-097-A
*
*
*
*
100
5%
5%
5%
5%
5%
MAIN BOARD, COMPLETE (US)
MAIN BOARD, COMPLETE (IT)
MAIN BOARD, COMPLETE (CND)
MAIN BOARD, COMPLETE (AUS)
**********************
(Including LED/PUSH SWITCH BOARDS)
3-034-587-01 HOLDER (LCD)
< BAND PASS FILTER >
BPF1
1-236-711-21 BAND PASS FILTER
< CAPACITOR >
C1
C2
C3
C4
C5
1-163-141-00
1-163-141-00
1-163-227-11
1-163-220-11
1-163-251-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.001uF
10PF
3PF
100PF
5%
5%
0.5PF
0.25PF
5%
50V
50V
50V
50V
50V
C9
C10
C12
C13
C16
1-163-021-11
1-163-131-00
1-163-227-11
1-163-021-11
1-163-021-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
390PF
10PF
0.01uF
0.01uF
10%
5%
0.5PF
10%
10%
50V
50V
50V
50V
50V
C17
C18
C19
C20
C21
1-104-664-11
1-124-257-00
1-124-584-00
1-107-823-11
1-126-163-11
ELECT
ELECT
ELECT
CERAMIC CHIP
ELECT
47uF
2.2uF
100uF
0.47uF
4.7uF
20%
20%
20%
10%
20%
16V
50V
10V
16V
50V
C22
C23
C24
C25
C26
1-163-251-11
1-163-021-11
1-126-963-11
1-109-982-11
1-104-664-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
ELECT
100PF
0.01uF
4.7uF
1uF
47uF
5%
10%
20%
10%
20%
50V
50V
50V
10V
16V
C27
C28
C29
C30
C31
1-163-021-11
1-104-664-11
1-163-021-11
1-163-021-11
1-109-982-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
47uF
0.01uF
0.01uF
1uF
10%
20%
10%
10%
10%
50V
16V
50V
50V
10V
C32
C36
C50
C51
C52
1-163-021-11
1-163-235-11
1-163-009-11
1-126-964-11
1-126-963-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
0.01uF
22PF
0.001uF
10uF
4.7uF
10%
5%
10%
20%
20%
50V
50V
50V
50V
50V
C53
C54
C55
C56
1-163-009-11
1-163-239-11
1-163-233-11
1-163-251-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
33PF
18PF
100PF
10%
5%
5%
5%
50V
50V
50V
50V
Ref. No.
Part No.
Description
Remark
C57
1-163-251-11 CERAMIC CHIP
100PF
5%
50V
C58
C59
C60
C61
C62
1-163-251-11
1-163-133-00
1-136-171-00
1-163-021-11
1-163-021-11
CERAMIC CHIP
CERAMIC CHIP
FILM
CERAMIC CHIP
CERAMIC CHIP
100PF
470PF
0.33uF
0.01uF
0.01uF
5%
5%
5%
10%
10%
50V
50V
50V
50V
50V
C63
C64
C65
C66
C67
C101
C102
C103
1-126-947-11
1-163-021-11
1-163-251-11
1-163-009-11
1-163-251-11
1-163-243-11
1-163-251-11
1-163-243-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
0.01uF
100PF
0.001uF
100PF
47PF
100PF
47PF
20%
10%
5%
10%
5%
5%
5%
5%
35V
50V
50V
50V
50V
50V
50V
50V
C104
C105
C120
C121
C201
1-163-243-11
1-163-133-00
1-163-009-11
1-126-963-11
1-163-243-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
47PF
470PF
0.001uF
4.7uF
47PF
5%
5%
10%
20%
5%
50V
50V
50V
50V
50V
C202
C203
C204
C205
C220
1-163-251-11
1-163-243-11
1-163-243-11
1-163-133-00
1-163-009-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
47PF
47PF
470PF
0.001uF
5%
5%
5%
5%
10%
50V
50V
50V
50V
50V
C221
C301
C302
C303
C320
1-126-963-11
1-163-021-11
1-126-934-11
1-126-382-11
1-126-964-11
ELECT
CERAMIC CHIP
ELECT
ELECT
ELECT
4.7uF
0.01uF
220uF
100uF
10uF
20%
50V
10%
50V
20%
10V
20%
16V
20%
50V
(EXCEPT US)
C320
1-128-551-11 ELECT
22uF
20%
C321
C322
C323
C324
1-163-009-11
1-163-021-11
1-163-009-11
1-163-021-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.01uF
0.001uF
0.01uF
10%
10%
10%
10%
50V
50V
50V
50V
C401
C402
C403
C407
C408
1-163-038-00
1-163-038-00
1-163-038-00
1-163-021-11
1-163-251-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.01uF
100PF
10%
5%
25V
25V
25V
50V
50V
C409
C410
C411
C412
C413
1-163-021-11
1-163-251-11
1-163-251-11
1-163-021-11
1-163-251-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
100PF
100PF
0.01uF
100PF
10%
5%
5%
10%
5%
50V
50V
50V
50V
50V
C420
C421
C423
C424
C425
1-163-235-11
1-163-237-11
1-163-233-11
1-163-233-11
1-163-021-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22PF
27PF
18PF
18PF
0.01uF
5%
5%
5%
5%
10%
50V
50V
50V
50V
50V
C426
C427
C428
C429
C432
1-163-021-11
1-163-021-11
1-163-021-11
1-126-924-11
1-126-935-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
0.01uF
0.01uF
0.01uF
330uF
470uF
10%
10%
10%
20%
20%
50V
50V
50V
6.3V
6.3V
C433
C434
1-163-038-00 CERAMIC CHIP
1-107-823-11 CERAMIC CHIP
0.1uF
0.47uF
10%
25V
16V
– 48 –
25V
(US)
MAIN
Ref. No.
Part No.
Description
Remark
C435
C436
C437
1-124-584-00 ELECT
1-163-021-11 CERAMIC CHIP
1-163-021-11 CERAMIC CHIP
100uF
0.01uF
0.01uF
20%
10%
10%
10V
50V
50V
C438
C439
C444
C445
C464
1-163-021-11
1-163-037-11
1-163-009-11
1-163-009-11
1-163-021-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.022uF
0.001uF
0.001uF
0.01uF
10%
10%
10%
10%
10%
50V
25V
50V
50V
50V
C465
C467
C468
C470
C471
1-163-251-11
1-163-227-11
1-163-251-11
1-163-251-11
1-163-251-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
10pF
100PF
100PF
100PF
5%
0.5PF
5%
5%
5%
50V
50V
50V
50V
50V
C472
C473
C501
C502
C503
1-163-251-11
1-163-251-11
1-163-009-11
1-164-004-11
1-164-004-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
100PF
0.001uF
0.1uF
0.1uF
5%
5%
10%
10%
10%
50V
50V
50V
25V
25V
C504
C505
C506
C507
C508
1-164-004-11
1-126-963-11
1-163-809-11
1-163-021-11
1-163-227-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
4.7uF
0.047uF
0.01uF
10PF
10%
20%
10%
10%
0.5PF
25V
50V
25V
50V
50V
C509
C510
C511
C512
C513
1-164-004-11
1-126-963-11
1-163-021-11
1-163-021-11
1-163-038-00
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
4.7uF
0.01uF
0.01uF
0.1uF
10%
20%
10%
10%
25V
50V
50V
50V
25V
C514
C515
C516
C517
C518
1-104-665-11
1-163-243-11
1-163-021-11
1-163-809-11
1-163-021-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
47PF
0.01uF
0.047uF
0.01uF
20%
5%
10%
10%
10%
10V
50V
50V
25V
50V
C519
C520
C521
C522
C523
1-163-809-11
1-164-489-11
1-163-085-00
1-163-227-11
1-163-009-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.047uF
0.22uF
2PF
10PF
0.001uF
10%
10%
0.5PF
10%
25V
16V
50V
50V
50V
C524
C525
C526
C527
C528
1-104-664-11
1-163-021-11
1-163-017-00
1-163-809-11
1-163-243-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
0.01uF
0.0047uF
0.047uF
47PF
20%
10%
5%
10%
5%
16V
50V
50V
25V
50V
C529
C530
C531
C532
C533
1-163-037-11
1-164-004-11
1-163-021-11
1-163-009-11
1-163-009-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.022uF
0.1uF
0.01uF
0.001uF
0.001uF
10%
10%
10%
10%
10%
25V
25V
50V
50V
50V
C534
C535
C536
C537
C538
1-163-038-00
1-104-665-11
1-163-038-00
1-107-823-11
1-163-133-00
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
100uF
0.1uF
0.47uF
470PF
10%
5%
25V
10V
25V
16V
50V
C539
C540
C541
C542
C543
1-163-251-11
1-104-665-11
1-163-021-11
1-164-489-11
1-163-021-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
100uF
0.01uF
0.22uF
0.01uF
5%
20%
10%
10%
10%
50V
10V
50V
16V
50V
Ref. No.
Part No.
Description
Remark
C544
C545
C546
C547
C548
1-163-021-11
1-163-021-11
1-126-382-11
1-163-009-11
1-163-038-00
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
100uF
0.001uF
0.1uF
10%
10%
20%
10%
50V
50V
16V
50V
25V
C549
C550
C551
C552
C553
1-163-243-11
1-163-227-11
1-163-021-11
1-164-004-11
1-163-038-00
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
10PF
0.01uF
0.1uF
0.1uF
5%
0.5PF
10%
10%
50V
50V
50V
25V
25V
C554
C555
C556
C557
C558
1-163-009-11
1-163-037-11
1-163-038-00
1-163-038-00
1-104-665-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.001uF
0.022uF
0.1uF
0.1uF
100uF
10%
10%
20%
50V
25V
25V
25V
10V
C559
C560
C561
C562
C563
1-163-021-11
1-163-251-11
1-163-251-11
1-163-251-11
1-163-251-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
100PF
100PF
100PF
100PF
10%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C564
C565
C566
C567
C568
C601
1-163-251-11
1-163-251-11
1-163-251-11
1-163-251-11
1-163-021-11
1-163-021-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
100PF
100PF
100PF
0.01uF
0.01uF
5%
5%
5%
5%
10%
10%
50V
50V
50V
50V
50V
50V
(US)
C602
1-126-934-11 ELECT
220uF
20%
10V
C603
1-163-021-11 CERAMIC CHIP
0.01uF
10%
50V
C604
1-163-017-00 CERAMIC CHIP
0.0047uF 10%
50V
C605
1-164-161-11 CERAMIC CHIP
0.0022uF 10%
50V
C606
1-163-009-11 CERAMIC CHIP
0.001uF
50V
(US)
(US)
(US)
(US)
10%
(US)
C607
1-163-251-11 CERAMIC CHIP
100PF
5%
50V
C608
1-163-009-11 CERAMIC CHIP
0.001uF
10%
50V
C609
1-163-021-11 CERAMIC CHIP
0.01uF
10%
50V
(US)
(US)
(US)
< FILTER >
* CF1
CF2
CF3
1-577-319-11 FILTER, CERAMIC
1-760-238-11 FILTER, CERAMIC
1-760-238-11 FILTER, CERAMIC
< CONNECTOR >
20%
CN301
* CN401
CN501
* CN502
1-695-330-31
1-770-641-11
1-774-465-11
1-564-708-11
PIN, CONNECTOR (PC BOARD) 7P
CONNECTOR, FFC/FPC 10P
CONNECTOR, FFC/FPC 16P
PIN, CONNECTOR (SMALL TYPE) 6P
< TRIMMER >
CT1
CT2
CT401
– 49 –
1-141-601-21 CAP, ADJ
1-141-601-21 CAP, ADJ
1-141-601-21 CAP, ADJ
MAIN
Ref. No.
Part No.
Description
Remark
< DIODE >
Ref. No.
Part No.
Description
Remark
L502
L503
L504
1-410-526-11 INDUCTOR
1-410-526-11 INDUCTOR
1-410-526-11 INDUCTOR
10uH
10uH
10uH
L505
L601
1-410-526-11 INDUCTOR
1-410-526-11 INDUCTOR
10uH
10uH (US)
D1
D2
D3
D5
D320
8-719-800-76
8-713-100-11
8-713-100-11
8-719-072-59
8-719-988-61
DIODE
DIODE
DIODE
DIODE
DIODE
1SS226
1T362
1T362
SVC347S-TL
1SS355TE-17
D321
D401
D402
D403
D404
8-719-914-44
8-719-074-44
8-719-074-44
8-719-074-44
8-719-074-44
DIODE
DIODE
DIODE
DIODE
DIODE
DAP202K
1SS120RX
1SS120RX
1SS120RX
1SS120RX
LCD401 1-803-590-11 DISPLAY PANEL, LIQUID CRYSTAL (US)
LCD401 1-803-604-11 DISPLAY PANEL, LIQUID CRYSTAL
(EXCEPT US)
D405
D406
D407
D408
D409
8-719-074-44
8-719-074-44
8-719-074-44
8-719-988-61
8-719-988-61
DIODE
DIODE
DIODE
DIODE
DIODE
1SS120RX (US)
1SS120RX (US)
1SS120RX (US)
1SS355TE-17 (AUS)
1SS355TE-17 (IT)
Q50
Q51
Q120
Q120
Q220
8-729-120-28
8-729-120-28
8-729-120-28
8-729-922-87
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6 (EXCEPT US)
2SD1757K-RS (US)
2SC1623-L5L6 (EXCEPT US)
D410
D411
D414
D415
D416
8-719-988-61
8-719-988-61
8-719-988-61
8-719-074-44
8-719-988-61
DIODE
DIODE
DIODE
DIODE
DIODE
1SS355TE-17 (US)
1SS355TE-17 (CND)
1SS355TE-17
1SS120RX
1SS355TE-17
Q220
Q320
Q321
Q401
Q402
8-729-922-87
8-729-027-31
8-729-120-28
8-729-141-75
8-729-141-75
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SD1757K-RS (US)
DTA124EKA-T146
2SC1623-L5L6
25D596DV345
25D596DV345
D417
D501
8-719-988-61 DIODE 1SS355TE-17
8-719-074-44 DIODE 1SS120RX
Q403
Q404
Q405
Q406
Q407
8-729-120-28
8-729-120-28
8-729-120-28
8-729-027-31
8-729-027-31
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6 (EXCEPT US)
2SC1623-L5L6 (EXCEPT US)
2SC1623-L5L6 (EXCEPT US)
DTA124EKA-T146
DTA124EKA-T146
Q501
Q502
Q601
Q602
8-729-120-28
8-729-801-84
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
2SB1013-4
2SC1623-L5L6 (US)
2SC1623-L5L6 (US)
< FERRITE BEAD >
FB501
< TRANSISTOR >
1-410-397-21 FERRITE BEAD INDUCTOR
< IC >
IC1
IC50
IC301
IC320
IC401
8-752-062-48
8-759-188-85
8-759-909-71
8-759-008-67
8-759-587-54
IC
IC
IC
IC
IC
CXA1238M-T6
BU2614FS
BA4558F
MC14066BF
uPD753012AGC-F17-3B9
IC402
IC501
IC502
IC503
IC601
8-759-165-89
8-752-074-34
8-752-373-06
8-759-336-75
8-759-587-55
IC
IC
IC
IC
IC
PST600L-T
CXA1782CQ
CXD2508AQ
BA5930FP
MSM6654A-542GS-KR1 (US)
< SHORT >
JC401
JC501
< LIQUID CRYSTAL DISPLAY >
1-216-295-00 SHORT
1-216-295-00 SHORT
0 (US)
0
< RESISTOR >
R1
R2
R3
1-216-097-00 RES, CHIP
1-216-097-00 RES, CHIP
1-216-061-00 METAL CHIP
100K
100K
3.3K
5%
5%
5%
R3
1-216-065-00 RES, CHIP
4.7K
R4
1-216-073-00 METAL CHIP
10K
1/10W
1/10W
1/10W
(US)
5%
1/10W
(EXCEPT US)
5%
1/10W
R6
R11
R12
R13
R14
1-216-121-00
1-216-057-00
1-216-025-00
1-216-073-00
1-216-105-00
RES, CHIP
RES, CHIP
RES, CHIP
METAL CHIP
RES, CHIP
1M
2.2K
100
10K
220K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R15
R16
R17
R18
R19
1-216-057-00
1-216-057-00
1-216-069-00
1-216-069-00
1-216-105-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
2.2K
2.2K
6.8K
6.8K
220K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R20
R50
R51
R52
R53
1-216-041-00
1-216-065-00
1-216-041-00
1-216-049-11
1-216-049-11
METAL CHIP
RES, CHIP
METAL CHIP
RES, CHIP
RES, CHIP
470
4.7K
470
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R54
R55
R56
1-216-049-11 RES, CHIP
1-216-049-11 RES, CHIP
1-216-073-00 METAL CHIP
1K
1K
10K
5%
5%
5%
1/10W
1/10W
1/10W
< COIL/SHORT >
L1
L2
L3
L4
L5
1-406-545-11
1-406-546-11
1-754-064-11
1-406-269-11
1-412-959-11
COIL, AIR-CORE
COIL, AIR-CORE
ANTENNA, FERRITE-ROD (AM)
COIL (OSC)
INDUCTOR
47uH
L50
L51
L301
L302
L302
1-412-959-11
1-412-951-11
1-412-496-51
1-414-235-11
1-216-295-00
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR (US)
SHORT
L401
L501
1-410-526-11 INDUCTOR
1-412-496-51 INDUCTOR
47uH
10uH
4.7uH
0 (EXCEPT US)
10uH
4.7uH
– 50 –
MAIN
Ref. No.
Part No.
Description
Remark
R57
R58
1-216-073-00 METAL CHIP
1-216-073-00 METAL CHIP
10K
10K
5%
5%
1/10W
1/10W
R59
R60
R101
R102
R103
1-216-097-00
1-216-073-00
1-216-081-00
1-216-081-00
1-216-081-00
RES, CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
10K
22K
22K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R104
R105
R106
R107
R108
1-216-081-00
1-216-089-00
1-216-089-00
1-216-073-00
1-216-073-00
METAL CHIP
RES, CHIP
RES, CHIP
METAL CHIP
METAL CHIP
22K
47K
47K
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R109
R110
R120
R121
R122
1-216-057-00
1-216-295-00
1-216-049-11
1-216-057-00
1-216-049-11
METAL CHIP
SHORT
METAL CHIP
METAL CHIP
RES, CHIP
2.2K
0
1K
2.2K
1K
5%
1/10W
5%
5%
5%
1/10W
1/10W
1/10W
R201
R202
R203
R204
R205
1-216-081-00
1-216-081-00
1-216-081-00
1-216-081-00
1-216-089-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
22K
22K
22K
22K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R206
R207
R208
R209
R210
1-216-089-00
1-216-073-00
1-216-073-00
1-216-057-00
1-216-295-00
RES, CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT
47K
10K
10K
2.2K
0
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R220
R221
R222
R302
R303
1-216-049-11
1-216-057-00
1-216-049-11
1-216-065-00
1-216-065-00
METAL CHIP
METAL CHIP
RES, CHIP
RES, CHIP
RES, CHIP
1K
2.2K
1K
4.7K
4.7K
5%
5%
5%
5%
5%
R320
1-216-049-11 RES, CHIP
1K
5%
R320
1-216-065-00 RES, CHIP
4.7K
5%
R321
R322
R323
1-216-073-00 METAL CHIP
1-216-049-11 RES, CHIP
1-216-049-11 RES, CHIP
10K
1K
1K
5%
5%
5%
R324
R325
R401
R402
R403
1-216-073-00
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
METAL CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
10K
1K
1K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R404
R405
R406
R407
R408
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
1K
1K
1K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R409
R410
R411
R412
R413
1-216-049-11
1-216-049-11
1-216-073-00
1-216-073-00
1-216-073-00
RES, CHIP
RES, CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
10K
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R414
R415
1-216-073-00 METAL CHIP
1-216-049-11 RES, CHIP
10K
1K
5%
5%
R416
1-216-049-11 RES, CHIP
1K
5%
1/10W
1/10W
(US)
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
(US)
1/10W
(EXCEPT US)
1/10W
1/10W
1/10W
Ref. No.
Part No.
Description
R417
R418
R419
R420
R421
1-216-049-11
1-216-049-11
1-216-077-00
1-216-077-00
1-216-077-00
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
1K
1K
15K
15K
15K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R422
R423
R424
R425
R426
1-216-097-00
1-216-049-11
1-216-049-11
1-216-049-11
1-216-041-00
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
METAL CHIP
100K
1K
1K
1K
470
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R427
R428
R429
R430
R431
1-216-049-11
1-216-049-11
1-216-025-00
1-216-049-11
1-216-049-11
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
1K
1K
100
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R432
R433
R434
R435
R436
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
1K
1K
1K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R438
R439
1-216-089-00 RES, CHIP
1-216-057-00 METAL CHIP
47K
2.2K
5%
5%
R439
1-216-089-00 RES, CHIP
47K
R440
1-216-081-00 METAL CHIP
22K
R440
1-216-121-00 RES, CHIP
1M
R441
R442
1-216-097-00 RES, CHIP
1-216-073-00 METAL CHIP
100K
10K
5%
5%
1/10W
1/10W
R443
R444
R445
R446
R447
1-216-049-11
1-216-049-11
1-216-073-00
1-216-073-00
1-216-113-00
RES, CHIP
RES, CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
10K
10K
470K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R448
R449
R450
R451
R452
1-216-113-00
1-216-113-00
1-216-113-00
1-216-113-00
1-216-049-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
470K
470K
470K
470K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R453
R454
R455
R456
R457
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
1K
1K
1K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R458
R459
R460
R461
R462
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
1K
1K
1K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R463
R464
R465
R466
R467
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
1-216-049-11
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
1K
1K
1K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R468
R469
1-216-049-11 RES, CHIP
1-216-113-00 METAL CHIP
1K
470K
5%
5%
1/10W
1/10W
– 51 –
Remark
1/10W
1/10W
(US)
5%
1/10W
(EXCEPT US)
5%
1/10W
(EXCEPT US)
5%
1/10W
(US)
MAIN
Ref. No.
Part No.
Description
Remark
R470
R471
1-216-049-11 RES, CHIP
1-216-049-11 RES, CHIP
1K
1K
5%
5%
1/10W
1/10W
(EXCEPT US)
5%
1/10W
5%
1/10W
(EXCEPT US)
R472
R473
1-216-049-11 RES, CHIP
1-216-025-00 RES, CHIP
1K
100
R474
1-216-073-00 METAL CHIP
10K
5%
R475
1-216-073-00 METAL CHIP
10K
5%
R476
R477
R478
1-216-073-00 METAL CHIP
1-216-073-00 METAL CHIP
1-216-073-00 METAL CHIP
10K
10K
10K
5%
5%
5%
R479
R480
R481
R482
R489
1-216-073-00
1-216-073-00
1-216-049-11
1-216-105-00
1-216-049-11
METAL CHIP
METAL CHIP
RES, CHIP
RES, CHIP
RES, CHIP
10K
10K
1K
220K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R490
R498
R501
1-216-049-11 RES, CHIP
1-216-073-00 METAL CHIP
1-216-057-00 METAL CHIP
1K
10K
2.2K
5%
5%
5%
1/10W
1/10W
1/10W
R502
R503
R504
R505
R506
1-216-065-00
1-216-073-00
1-216-073-00
1-216-113-00
1-216-097-00
RES, CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
4.7K
10K
10K
470K
100K
5%
5%
5%
5%
5%
R507
R508
R510
R511
R512
1-216-113-00
1-216-095-00
1-216-097-00
1-216-089-00
1-216-097-00
METAL CHIP
METAL CHIP
RES, CHIP
RES, CHIP
RES, CHIP
470K
82K
100K
47K
100K
R513
R514
R516
R517
R518
1-216-081-00
1-216-101-00
1-216-077-00
1-216-073-00
1-216-065-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
R519
R520
R521
R523
R524
1-216-081-00
1-216-081-00
1-216-081-00
1-216-009-00
1-216-089-00
R525
R529
R530
R531
R532
Ref. No.
Part No.
Description
Remark
R545
R546
R547
1-216-121-00 RES, CHIP
1-216-073-00 METAL CHIP
1-216-105-00 RES, CHIP
1M
10K
220K
5%
5%
5%
1/10W
1/10W
1/10W
R548
R549
R550
R551
R552
1-216-097-00
1-216-097-00
1-216-073-00
1-216-049-11
1-216-073-00
RES, CHIP
RES, CHIP
METAL CHIP
RES, CHIP
METAL CHIP
100K
100K
10K
1K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R553
R554
R555
R556
R557
1-216-097-00
1-216-073-00
1-216-073-00
1-216-081-00
1-216-081-00
RES, CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
10K
10K
22K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R558
R559
R601
1-216-089-00 RES, CHIP
1-216-089-00 RES, CHIP
1-216-049-11 RES, CHIP
47K
47K
1K
5%
5%
5%
R602
1-216-049-11 RES, CHIP
1K
5%
R603
1-216-049-11 RES, CHIP
1K
5%
1/10W
1/10W
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
1/10W
1/10W
1/10W
1/10W
R604
1-216-025-00 RES, CHIP
100
5%
R605
1-216-049-11 RES, CHIP
1K
5%
R606
1-216-049-11 RES, CHIP
1K
5%
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R607
1-216-049-11 RES, CHIP
1K
5%
R608
1-216-081-00 METAL CHIP
22K
5%
R609
1-216-097-00 RES, CHIP
100K
5%
22K
150K
15K
10K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R610
1-216-097-00 RES, CHIP
100K
5%
R611
1-216-061-00 METAL CHIP
3.3K
5%
R612
1-216-073-00 METAL CHIP
10K
5%
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
RES, CHIP
22K
22K
22K
22
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R613
1-216-049-11 RES, CHIP
10K
5%
R614
1-216-049-11 RES, CHIP
1K
5%
1-216-119-00
1-216-101-00
1-216-105-00
1-216-113-00
1-216-097-00
METAL CHIP
METAL CHIP
RES, CHIP
METAL CHIP
RES, CHIP
820K
150K
220K
470K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R615
1-216-049-11 RES, CHIP
1K
5%
R616
1-216-049-11 RES, CHIP
1K
5%
R617
1-216-049-11 RES, CHIP
1K
5%
R533
R534
R535
R536
R537
1-216-109-00
1-216-095-00
1-216-089-00
1-216-089-00
1-216-089-00
METAL CHIP
METAL CHIP
RES, CHIP
RES, CHIP
RES, CHIP
330K
82K
47K
47K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R538
R539
R540
R541
R542
1-216-089-00
1-216-097-00
1-216-073-00
1-216-073-00
1-216-049-11
RES, CHIP
RES, CHIP
METAL CHIP
METAL CHIP
RES, CHIP
47K
100K
10K
10K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R543
R544
1-216-061-00 METAL CHIP
1-216-073-00 METAL CHIP
3.3K
10K
5%
5%
1/10W
1/10W
1/10W
(EXCEPT US)
1/10W
(EXCEPT US)
1/10W
1/10W
1/10W
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
1/10W
(US)
< VARIABLE RESISTOR >
RV1
RV501
RV502
1-238-601-11 RES, ADJ, CARBON 22K
1-230-497-11 RES, ADJ, CARBON 22K
1-230-497-11 RES, ADJ, CARBON 22K
< SWITCH >
S421
S422
S423
– 52 –
1-572-949-11 SWITCH, SLIDE (SOUND MODE) (US)
1-572-949-11 SWITCH, SLIDE (SOOUND LEVEL) (US)
1-571-478-11 SWITCH, SLIDE (BRIGHTNESS) (EXCEPT US)
MAIN
Ref. No.
Part No.
Description
Remark
Ref. No.
< TRANSFORMER >
T1
1-404-790-11 TRANSFORMER, IF
MOTOR
POWER
Part No.
Description
C365
C366
C367
C368
1-110-501-11
1-110-501-11
1-107-823-11
1-107-823-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.33uF
0.33uF
0.47uF
0.47uF
10%
10%
10%
10%
Remark
16V
16V
16V
16V
C369
C370
C374
C901
C902
C903
1-107-823-11
1-126-960-11
1-109-982-11
1-107-906-11
1-163-021-11
1-163-021-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.47uF
1uF
1uF
10uF
0.01uF
0.01uF
10%
20%
10%
20%
10%
10%
16V
50V
10V
50V
50V
50V
C904
C905
C906
C907
C908
1-163-021-11
1-163-021-11
1-163-021-11
1-163-021-11
1-107-901-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.01uF
0.01uF
0.01uF
0.01uF
0.47uF
10%
10%
10%
10%
20%
50V
50V
50V
50V
50V
C909
C910
C911
C912
C913
1-107-909-11
1-163-021-11
1-128-547-11
1-163-021-11
1-107-889-11
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
ELECT
47uF
0.01uF
6800uF
0.01uF
220uF
20%
10%
20%
10%
20%
35V
50V
16V
50V
10V
C914
C915
C916
C917
C918
1-107-869-61
1-163-021-11
1-163-021-11
1-107-889-11
1-107-869-61
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
470uF
0.01uF
0.01uF
220uF
470uF
20%
10%
10%
20%
20%
6.3V
50V
50V
10V
6.3V
C919
C920
1-163-021-11 CERAMIC CHIP
1-163-021-11 CERAMIC CHIP
0.01uF
0.01uF
10%
10%
50V
50V
< VIBRATOR >
X50
1-760-130-11 VIBRATOR, CRYSTAL (75kHz)
X401
1-767-697-11 VIBRATOR, CRYSTAL (32.768kHz)
X402
1-781-357-11 VIBRATOR, CERAMIC (4.194MHz)
X501
1-760-793-11 VIBRATOR, CERAMIC (16.933MHz)
X601
1-760-641-21 VIBRATOR, CERAMIC (4.19MHz) (US)
**************************************************************
1-673-804-12 MOTOR BOARD
*************
*
< SWITCH >
S570
1-571-936-11 SWITCH, LEAF (LIMIT)
**************************************************************
*
*
*
*
A-3683-083-A
A-3683-094-A
A-3683-096-A
A-3683-098-A
POWER BOARD, COMPLETE (US)
POWER BOARD, COMPLETE (IT)
POWER BOARD, COMPLETE (CND)
POWER BOARD, COMPLETE (AUS)
************************
*
!
!
!
1-533-217-31
1-535-771-11
1-555-795-00
1-783-817-11
1-790-431-11
HOLDER, FUSE (EXCEPT US)
TERMINAL (IT, AUS)
CORD, POWER (IT)
CORD, POWER (US, CND)
CORD, POWER (AUS)
3-701-946-26 LABEL, FUSE RATING (CND)
7-685-546-19 SCREW +BTP 3X8 TYPE2 N-S
*
< CONNECTOR >
< CAPACITOR >
C150
C151
C152
C153
C154
1-163-019-00
1-126-963-11
1-163-009-11
1-110-501-11
1-110-501-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0068uF
4.7uF
0.001uF
0.33uF
0.33uF
10%
20%
10%
10%
10%
50V
50V
50V
16V
16V
C155
C250
C251
C252
C253
1-126-926-11
1-163-019-00
1-126-963-11
1-163-009-11
1-110-501-11
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
1000uF
0.0068uF
4.7uF
0.001uF
0.33uF
20%
10%
20%
10%
10%
10V
50V
50V
50V
16V
C254
C255
C351
C352
C353
1-110-501-11
1-126-926-11
1-109-982-11
1-126-963-11
1-126-933-11
CERAMIC CHIP
ELECT
TANTALUM CHIP
ELECT
ELECT
0.33uF
1000uF
4.7uF
4.7uF
100uF
10%
20%
10%
20%
20%
16V
10V
16V
50V
16V
C354
C355
C356
C357
C358
1-107-823-11
1-163-809-11
1-126-963-11
1-104-655-11
1-163-009-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
0.47uF
0.047uF
4.7uF
100uF
0.001uF
10%
10%
20%
20%
10%
16V
25V
50V
10V
50V
C359
C360
C361
C362
C363
1-104-655-11
1-126-176-11
1-104-665-11
1-104-665-11
1-110-501-11
ELECT
ELECT
ELECT
ELECT
CERAMIC CHIP
100uF
220uF
100uF
100uF
0.33uF
20%
20%
20%
20%
10%
10V
10V
10V
10V
16V
C364
1-110-501-11 CERAMIC CHIP
0.33uF
10%
16V
*
*
*
*
*
CN303
CN304
CN305
CN306
CN307
1-580-189-11
1-580-189-11
1-568-272-11
1-564-720-11
1-564-704-11
SOCKET, CONNECTOR 10P
SOCKET, CONNECTOR 10P
SOCKET, CONNECTOR 6P
PIN, CONNECTOR (SMALL TYPE) 4P
SOCKET, CONNECTOR 2P
< DIODE >
D350
D351
D901
D902
D903
8-719-914-43
8-719-914-43
8-719-074-44
8-719-074-44
8-719-074-44
DIODE
DIODE
DIODE
DIODE
DIODE
DAN202K
DAN202K
1SS120RX
1SS120RX
1SS120RX
D904
D905
D905
D906
D906
8-719-074-44
8-719-911-55
8-719-979-32
8-719-911-55
8-719-979-32
DIODE
DIODE
DIODE
DIODE
DIODE
1SS120RX
U05G (CND)
RL202-M11 (EXCEPT CND)
U05G (CND)
RL202-M11 (EXCEPT CND)
D907
D907
D908
D908
D909
8-719-911-55
8-719-979-32
8-719-911-55
8-719-979-32
8-719-109-88
DIODE
DIODE
DIODE
DIODE
DIODE
U05G (CND)
RL202-M11 (EXCEPT CND)
U05G (CND)
RL202-M11 (EXCEPT CND)
RD5.6ES-B1
D910
D911
8-719-109-97 DIODE RD6.8ES-B2
8-719-988-61 DIODE 1SS355TE-17
< FUSE >
! F901
! F901
– 53 –
1-576-108-11 FUSE (4A/125V) (CND)
1-532-237-00 FUSE (T3.15AL/250V) (IT, AUS)
The components identified by
mark ! or dotted line with
mark ! are critical for safety.
Replace only with part number specified.
Les composants identifiés par une
marque ! sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le neméro spécifié.
POWER
Ref. No.
PUSH SWITCH
Part No.
VOLUME
Description
Remark
Ref. No.
< IC >
IC350
IC351
8-759-543-56 IC LA4601N
8-759-426-51 IC BA5417
< LINE FILTER >
! LF901
1-424-150-11 TRANSFORMER, LINE FILTER
< TRANSISTOR >
Q150
Q151
Q250
Q251
Q350
8-729-120-28
8-729-021-82
8-729-120-28
8-729-021-82
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
2SD2396K
2SC1623-L5L6
2SD2396K
2SC1623-L5L6
Q351
Q352
Q353
Q354
Q355
8-729-120-28
8-729-027-31
8-729-120-28
8-729-120-28
8-729-027-31
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
DTA124EKA-T146
2SC1623-L5L6
2SC1623-L5L6
DTA124EKA-T146
Q901
Q902
Q903
Q904
8-729-021-82
8-729-021-82
8-729-049-50
8-729-027-31
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SD2396K
2SD2396K
2SB1424-T100-R
DTA124EKA-T146
Part No.
Description
Remark
R369
R370
R371
1-216-073-00 METAL CHIP
1-216-049-11 RES, CHIP
1-216-049-11 RES, CHIP
10K
1K
1K
5%
5%
5%
1/10W
1/10W
1/10W
R372
R373
R375
R901
R902
R903
1-216-073-00
1-216-049-11
1-216-049-11
1-216-025-00
1-216-097-00
1-216-097-00
METAL CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
RES, CHIP
10K
1K
1K
100
100K
100K
5%
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
R904
R905
R906
R907
R908
1-216-089-00
1-216-041-00
1-216-041-00
1-216-049-11
1-216-041-00
RES, CHIP
METAL CHIP
METAL CHIP
RES, CHIP
METAL CHIP
47K
470
470
1K
470
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
1
1
5%
5%
1/4W F
1/4W F
! R909
! R910
1-219-149-11 FUSIBLE
1-219-149-11 FUSIBLE
< TRANSFORMER >
! T901
1-449-199-11 TRANSFORMER, POWER (US)
! T901
1-449-200-11 TRANSFORMER, POWER (IT)
! T901
1-449-202-11 TRANSFORMER, POWER (AUS)
! T901
1-449-350-11 TRANSFORMER, POWER (CND)
**************************************************************
< RESISTOR >
1-673-802-12 PUSH SWITCH BOARD
*******************
(Included in MAIN BOARD, COMPLETE)
*
R150
R151
R152
R153
R154
1-216-073-00
1-216-073-00
1-216-057-00
1-216-298-00
1-216-049-11
RES, CHIP
RES, CHIP
METAL CHIP
METAL CHIP
RES, CHIP
10K
10K
2.2K
2.2
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R155
R156
R157
R250
R251
1-216-017-00
1-216-049-11
1-216-033-00
1-216-073-00
1-216-073-00
RES, CHIP
RES, CHIP
METAL CHIP
RES, CHIP
RES, CHIP
47
1K
220
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R252
R253
R254
R255
R256
1-216-057-00
1-216-298-00
1-216-049-11
1-216-017-00
1-216-049-11
METAL CHIP
METAL CHIP
RES, CHIP
RES, CHIP
RES, CHIP
2.2K
2.2
1K
47
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R257
R351
R352
R353
R354
1-216-033-00
1-216-073-00
1-216-073-00
1-216-089-00
1-216-097-00
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
RES, CHIP
220
10K
10K
47K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R355
R356
R357
R358
R359
1-216-073-00
1-216-089-00
1-216-073-00
1-216-077-00
1-216-033-00
METAL CHIP
RES, CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
47K
10K
15K
220
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R360
R361
R362
R363
R364
1-216-033-00
1-216-085-00
1-216-298-00
1-216-298-00
1-216-065-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES, CHIP
220
33K
2.2
2.2
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R365
R366
1-216-045-00 METAL CHIP
1-216-053-00 METAL CHIP
680
1.5K
5%
5%
1/10W
1/10W
< SWITCH >
S424
1-762-108-31 SWITCH, PUSH (1 KEY)
(CD LID OPEN/CLOSE DET)
**************************************************************
1-673-800-12 VOLUME BOARD
**************
*
< CONNECTOR >
CN302
1-695-368-31 PIN, CONNECTOR (PC BOARD) 7P
< VARIABLE RESISTOR >
RV301 1-240-871-11 REGISTER (VOLUME)
RV302 1-240-870-11 REGISTER (MEGA BASS)
**************************************************************
MISCELLANEOUS
**************
4
11
13
61
! 151
ANT1
M570
M571
– 54 –
1-790-755-11
1-452-732-11
1-790-756-11
1-769-824-11
8-848-379-31
WIRE (FLAT TYPE) (7 CORE)
MAGNET
WIRE (FLAT TYPE) (10 CORE)
WIRE (FLAT TYPE) (16 CORE)
OPTICAL PICK-UP KSS-213B
1-501-907-21 ANTENNA, FM WIRE
X-2625-769-1 GEAR ASSY (MB), MOTOR (SLED)
X-2625-770-2 CHASSIS ASSY (MB), (RP) (SPINDLE)
The components identified by
mark ! or dotted line with
mark ! are critical for safety.
Replace only with part number specified.
Les composants identifiés par une
marque ! sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Ref. No.
SP101
SP201
Part No.
Description
Remark
Ref. No.
1-529-354-11 SPEAKER (6.6cm) (L ch)
1-529-354-11 SPEAKER (6.6cm) (R ch)
SP301 1-529-355-11 SPEAKER (9.2cm)
************************************************************
*************
HARDWARE LIST
*************
#1
7-685-546-19 SCREW +BTP 3X8 TYPE2 N-S
#2
7-685-903-31 SCREW +PTPWH 3X10 (TYPE2)
#3
7-685-649-79 SCREW +P 3X14 TYPE2 NON-SLIT
#4
7-685-133-19 SCREW +BTP 2.6X6 TYPE2 N-S
#5
7-621-255-15 SCREW +P 2X3
#6
7-685-547-19 SCREW +B 3X10
************************************************************
ACCESSORIES & PACKING MATERIALS
********************************
3-366-485-11 MANUAL, INSTRUCTION (ENGLISH, FRENCH,
GERMAN, DUTCH) (CND)
3-866-485-21 MANUAL, INSTRUCTION (ENGLISH) (US, AUS)
3-866-485-31 MANUAL, INSTRUCTION (SPANISH,
SWEDISH, ITALIAN, PORTUGUESE) (IT)
– 55 –
Part No.
Description
Remark
ICF-CD873
Sony Corporation
9-927-109-11
Personal Audio Company
– 56 –
99D0565-1
Printed in Japan © 1999. 4
Published by General Engineering Dept.