The Bench-effect Method
Transcription
The Bench-effect Method
The ® Bench-effect Method External Support for SMEs Method Experiences Recommendations A Project within the Framework of the ESF Programme EQUAL II: "bench-effect – crossing border – involvement-oriented learnshops in SMEs" prof.dr.sc. dieter walter dr.sc. ingo klein Authors: Prof.Dr.sc. Dieter Walter Dr.sc. Ingo Klein Strausberg, November 2007 2 prof.dr.sc. dieter walter dr.sc. ingo klein Content The origin of the project "Bench-effect – crossing border – 1 involvement-oriented learnshops in SMEs".........................................4 1.1 Project conception, partners ................................................4 1.2 Specific economic characteristics of Brandenburg and East Brandenburg ...............................................................................5 1.3 Experience and conclusions drawn from the project "EQUAL FUTURE 2005 East Brandenburg"..................................................8 1.4 Supporting enterprises in the competition of regions............. 10 1.5 Definition of success factors and areas of learning ................ 12 2 Sources of the bench-effect method.......................................... 15 2.1 Overview......................................................................... 15 2.2 Benchmarking and best practice......................................... 16 2.3 Quality management and business excellence ...................... 20 2.4 Change management........................................................ 23 2.5 Learning organisations, knowledge management, and benchlearning ........................................................................... 25 3 The functionality and the practical relevance of the bench -effect method ....................................................................................... 30 3.1 Basic idea and functionality ............................................... 30 3.2 Comparison of companies in different branches of industry.... 33 3.3 Comparison of companies within one branch of industry........ 35 4 Experience gained due to the application of the bench-effect method 37 4.1 The application of the bench-effect method under the specific East Brandenburg conditions ....................................................... 37 4.2 The combination of acquisition, as-is analysis, identification of qualification needs and change needs........................................... 45 4.2.1 Acquisition methods ................................................... 45 4.2.2 The as-is analysis ....................................................... 51 4.3 Project phases, participation of enterprises.......................... 55 4.4 Networks as the objective of the method............................. 74 5 Conclusions and recommendations ........................................... 77 5.1 bench-effect – more necessary than ever ............................ 77 5.2 Flexibility – methods, timescale, topics, participants ............. 78 5.3 Working with learning paths and action plans ...................... 80 5.4 Composition of groups: heterogeneous vs. homogenous ....... 82 5.5 Recommendations on the organization of the bench-effect method .................................................................................... 85 5.6 Conclusion in form of seven questions................................. 89 6 Appendix ............................................................................... 92 7 Bibliography: ....................................................................... 115 8 Additional information:.......................................................... 116 3 prof.dr.sc. dieter walter dr.sc. ingo klein 1 The origin of the project "Bench-effect – crossing border – involvement-oriented learnshops in SMEs" 1.1 Project conception, partners Project conception The main objective of the European support programme "Bench-effect – crossing border – involvement-oriented learnshops in SMEs" is to initiate a participation-oriented learning process in co-operation with entrepreneurs and employees. (SME = small and medium-sized enterprise) This learning process starts with the analysis of the company’s/organisation’s activities. In a second step, a comparison of companies is carried out in order to obtain knowledge and gain motivation for company’s/organisation’s own improvement processes (benchmarking). The last step is to exploit the identified improvement potentials in a flexible and multi-methodical way (bench-effect). Thematically organised training centres (learnshops) support the participants during the process described above. Development partnership We set up a development partnership to implement the EQUAL II project "Bench-effect" in East Brandenburg in 2004 and 2005. The development partnership named "Schrittmacher OderSpree" (Pacesetter OderSpree) comprised the following members: • bbw Bildungszentrum Frankfurt/Oder (Vocational Training Centre in Frankfurt/Oder) • DAA Brandenburg-Ost (German Academy of Employees East Brandenburg) • Handwerkskammer Frankfurt/Oder (Chamber of Trade in Frankfurt/Oder) • IHK-Bildungszentrum Frankfurt/Oder (Training Centre of the Chamber of Industry and Commerce in Frankfurt/Oder) • IHK-Projektgesellschaft mbH Frankfurt/Oder (Project Company of the Chamber of Industry and Commerce in Frankfurt/Oder) • TFH Wildau (Technical University of Applied Sciences in Wildau) How did we come to the idea of the project? The idea of the project "Bench-effect – crossing border – involvement-oriented learnshops in SMEs" was triggered by the following three factors: • The special economic characteristics of Brandenburg and East Brandenburg • Experience and conclusions drawn from the "EQUAL - FUTURE 2005 Ostbrandenburg" (EQUAL - FUTURE 2005 East Brandenburg) project • The intention of the development partners to support enterprises in the competition of the regions 4 prof.dr.sc. dieter walter dr.sc. ingo klein 1.2 Specific economic characteristics of Brandenburg and East Brandenburg The economic situation of Brandenburg and East Brandenburg can be understood properly only if the entire economic region Berlin-Brandenburg is taken into consideration. Briefly, this economic region is characterised by serious structural weaknesses and a large potential for development, which gives reason for hope. Positive location factors A recent publication of the Brandenburg Ministry of Economic describes the region as follows: “The capital region is as large as Belgium. The size of its population is similar to Switzerland’s. Brandenburg offers excellent transnational transport connections and highly skilled and motivated workers. […] The German capital region is characterised by a high concentration of research and Frankfurt/Oder development and institutes. Potsdam), the Film Three and universities Television (in Cottbus, Academy, five universities of applied science and twenty-one technology centres complement the attractions of Berlin making this region to the densest area in terms of research institutions in Germany. Brandenburg offers application-related competences especially in the field of traffic engineering, microsystems engineering, power engineering, constructional engineering, electronics, optics, chemical industry, environmental engineering, life sciences as well as renewable energies.” (Source 17) However, we would like to emphasise some further positive features of Brandenburg: The proportion of self-employed is rather high. In fact, it is the highest in the newly formed German territorial states. The rate of self-employed is higher than in North Rhine-Westphalia, Bremen or Saarland. The rate of employed females is the highest among the newly formed German states. Compared to the other newly formed German states, the migration rate is not so high in Brandenburg, since many people commute to Berlin. The new international Airport Berlin-Brandenburg will create 40,000 new jobs and trigger an economic development which will affect the entire region. 5 prof.dr.sc. dieter walter dr.sc. ingo klein Structural weaknesses Brandenburg has a large number of serious structural weaknesses: Economic growth rate and GDP per capita are amongst the lowest in Germany. The average growth rate of Brandenburg was 0.8 per cent between 2004 and 2006. Berlin was the only state that showed an even worse performance at 0.3 per cent. The German average was double as high: 1.6 per cent. The income level of the Brandenburg people is the second lowest among the German states. The GDP per capita is € 19.000. Due to strong economic links to Berlin, Brandenburg’s development is heavily dependent on the German capital. Berlin is characterised by a low growth rate and a high public debt. Brandenburg’s population density and birth rate are very low. The structure of the state is largely rural. The rate of urban population is the lowest in Germany. The industrial investment ratio is rather low in Brandenburg. It is lower than in Saxony and in Saxony-Anhalt. Since Brandenburg is lacking real industry, especially in the peripheral regions, and due to the bad economic situation of Berlin, the unemployment rate is high. Merely 56 per cent of the working-age population can find a job in Brandenburg. This rate amounts to 65 per cent in Saxony. The unemployment rate is 20.9 per cent, although approximately 25 per cent of the Brandenburg people work in other federal states of Germany and only 10 per cent of the employed people commute form another state. Only 87 per cent of those who wish to learn a profession can find an apprenticeship. This is the second lowest rate in Germany. Berlin comes in last with 84.3 per cent. The public debt per capita amounts to € 6,420. This is 1000 euro more than the German average (€ 5,356). Public debt per capita in Saxony is less then half as high as in Brandenburg. High interest expenditure limits the leeway for other public spending. The research and development budget is the lowest among the German states. The number of first-year students and the higher education expenditure is lower in Brandenburg than anywhere else in Germany. The economic structure is characterised by micro and small enterprises. Ninety per cent of the companies have less than ten employees. Economic situation and living conditions are very diverse in the single regions of Brandenburg. Differences are huge between the affluent suburbs of Berlin, the Uckermark area, and the region along the Polish border. 6 prof.dr.sc. dieter walter dr.sc. ingo klein Most enterprises are engaged in traditional industries. The proportion of highly innovative companies is smaller than in other German states. There are only a few large companies. They focus on steal processing, new materials and processing of raw materials. East Brandenburg suffers from the competition with Polish manufacturers and service providers, since labour costs and prices are much lower on the Polish side of the border. In spite of positive trends, exports and international economic relations are still rather low when compared to other German states.(Source 18) The situation in East Brandenburg The above-mentioned weaknesses of Brandenburg also apply to the two administrative districts Oder-Spree (LOS) and Märkisch Oderland (MOL), both situated in the Eastern part of Brandenburg. They are adjacent to Berlin, but the affluent suburbs are located more to the South and to the West from the capital. Frankfurt (Oder) has lost more than one fourth of its population since 1989. Three large investment projects failed spectacularly in the recent past. Two of them in East Brandenburg: a chip plant project in Frankfurt (Oder) and the heavy lift airship project of the company Cargolifter in Brand. The Cargolifter hangar planned for production and operation of the airships is now used as a holiday resort called Tropical Island. The resort can only survive because it receives financial support by the state. The revised economic development project of Brandenburg focuses on six main industrial locations and eight growth industries. These industrial locations in LOS and MOL are: Eisenhüttenstadt, Fürstenwalde, Beeskow, Grünheide/Freienbrink, Strausberg and the Rüdersdorf area. The growth industries of the region are: automotive industry, energy industry, timber industry, chemicals industry and synthetic materials, logistics, aeronautical engineering, metal production and processing, paper industry as well as railway transportation technology. 1,200 commercial investments were supported in the East Brandenburg districts LOS and MOL between 1990 and 2004. During this period, the total amount of support was approximately 650 million euro. The overall investment volume amounted to approximately 2.9 thousand million euro and helped to create ten thousand new jobs. The commercial potential of East Brandenburg is represented by enterprises such as the Arcelor GmbH in Eisenhüttenstadt, the Stemme AG in Strausberg and the OECA GmbH, an opto-electronic component manufacturer and application provider in Dahlwitz-Hoppegarten. 7 prof.dr.sc. dieter walter dr.sc. ingo klein Five solar manufacturing sites are being set up in Brandenburg currently, most of them in Frankfurt (Oder). Conergy, a company based in Hamburg, took over the premises of the former chip plant. This new start has trigged impulses for development and has resulted in increased demand for qualified workers. (Source 17) 1.3 Experience and conclusions drawn from the project "EQUAL FUTURE 2005 East Brandenburg" The idea for the bench-effect method and its application arose from the experience the development partners gained during the "EQUAL - FUTURE 2005 East Brandenburg" project. The composition of the development partnership had hardly changed since the ESF programme "EQUAL – FUTURE 2005 – East Brandenburg". We aimed to support the key economic sectors in East Brandenburg by offering complementing measures in the field of qualification, consulting and coaching. We worked with more than 3,000 people. Most of them were employees of regional SMEs active in the five sectors with the best economic performance in East Brandenburg. We identified five problems that are the main obstacles to improvement. Lack of self-reflection We discovered that the participating SMEs usually do not reflect on their work systematically. They analyse the results of their business activities rather rarely. They only do so if they really have to (annual financial statements, tights liquidity position, negotiations with banks, loss of customers). Even if they conduct an analysis, they usually assess themselves compared to their past business results. Our experience with the EQUAL I project clearly shows that the traditional management style is rather pragmatic. It focuses mostly on operational issues, and lacks strategic planning. The "learning" organisation approach does not stand a chance in such a business environment. Any support by the EU, the German federal government or the state of Brandenburg would most probably fail. Consequently, the EQUAL II project aimed to find an effective method to improve the situation of SMEs, a method that sets a new standard for successful business activities. 8 prof.dr.sc. dieter walter dr.sc. ingo klein Low motivation to learn and to change We found out during the EQUAL I project that learning in general and the willingness and readiness for change in particular appear of no great importance for business culture in East Brandenburg. To get to the heart of the problem: the demand for business education is rather low. This holds true even if the education programmes are almost free of charge, and even if they are adjusted to the special needs of the companies. However, one cannot force anybody to learn. Accordingly, the EQUAL II project aimed to find an effective method to improve the situation of SMEs, a method that helps to motivate people to participate, to learn, and to make a change. Tailoring our education programmes according to the needs of the companies will not increase the motivation to an appropriate extent. We have to create motivation before we plan our programmes. This means that we have to create a demand for education programmes in the first place. In order to create an independent demand for business education, we will have to change the business culture. We can only achieve it in co-operation with the people concerned. External support can provide a stimulus and in some cases, it might even be indispensable. However, we cannot force companies to take such an approach. Lack of networking SMEs in the East Brandenburg region usually operate isolated from each other. In most cases, they know the market, the customers/consumers and the suppliers. They also know their competitors if their activities include manufacturing processes. However, they have neither the appropriate knowledge nor the necessary economic capacity or size to be engaged in supra-regional or international business activities. SMEs seldom choose to overcome these difficulties by cooperating with other companies. East Brandenburg SMEs usually work alone and do not participate in networks. This is the reason, why these SMEs draw so little inspiration from a systematic comparison with others. It has come to our attention that people are very modest which might be one of the reasons for the situation described above. 9 prof.dr.sc. dieter walter dr.sc. ingo klein 1.4 Supporting enterprises in the competition of regions Lacking self-reflection, a sceptical attitude towards changes, isolation and poor networking shown by East Brandenburg companies stand in a diametrical relation with the demands of an increasing competition between different locations. It has become easier to trade with products and services across local, regional and national borders. The mobility of workforce and capital has also been increasing constantly. The expansion of the European Union to Eastern European countries has clearly shown that the economic region BerlinBrandenburg, and the East Brandenburg region in particular, have to stand their ground in the competition of business and industry locations. These regions need committed and talented workers, enterprises and institutions. Not only nations compete with each other on globalised markets of the European Union. Single economic regions are also facing an increasing competition. This competition takes place at all levels. The competition does not only refer to such obvious issues as markets, investors, infrastructure and supply of skilled workers. It also applies to soft location factors such as tourist attractiveness, quality of life and housing, cultural and educational services as well as public security. The East Brandenburg region will only be able to catch up with other successful European regions, if the existing SMEs become more competitive, if new SMEs are set up in future-oriented business and industry sectors, and if companies are able to create more jobs. The European Social Funds (ESF) programme "Bench-effect – crossing border – involvement-oriented learnshops in SMEs" aims to enhance SMEs, their employees as well as unemployed people to increase their competitiveness. This region will have to compensate for the lack of large-size enterprises and companies with extensive research activities by setting up a well functioning networks consisting of small and medium-size enterprises. We carefully evaluated the experience we gained during the implementation of the ESF Programme EQUAL I: "FUTURE 2005 East Brandenburg", continued our theoretical work and assessed the results of other ESF programmes. We did so to ensure that EQUAL II not only improves the situation for SMEs but it also gives us a chance to experiment with different methods, to generalize the experience obtained, in order to increase the competitiveness in SMEs. 10 prof.dr.sc. dieter walter dr.sc. ingo klein Objectives of the "bench-effect method" We named our method the "bench-effect method". It is aimed to support East Brandenburg enterprises in the competition among different regions. We developed our method based on the analysis of the economic particularities of the Federal State of Brandenburg, the assessment of the experiences gained during the implementation of the project "EQUAL - FUTURE 2005 East Brandenburg", and our intention to support East Brandenburg enterprises in the increasing competition among different business locations and economic regions. We derived our ideas from the latest business economic and management literature (as described later) as well as from the individual experience and know-how of the IHK-Projektgesellschaft and the five participating training centres. We developed our method to be implemented and examined within the EU support programme "Bench-effect – crossing border – involvement-oriented learnshops in SMEs" This method is aimed to introduce a new way of entrepreneurial thinking and enables entrepreneurs and employees to overcome the above mentioned shortfalls. The focus of attention should move from a merely pragmatic and operative corporate management to a more strategic way of thinking. We suggest to all SMEs that they should create a frame of reference to compare their economic success with other companies. This comparison should reach beyond the borders of their regions, even if they do not plan to actually extend their activities over these borders, i.e. supra-regional benchmarking shall be applied for regional markets too. This particularly refers to national border regions within the EU – just like East Brandenburg - if the competitive position of SMEs becomes sustainable. 11 prof.dr.sc. dieter walter dr.sc. ingo klein 1.5 Definition of success factors and areas of learning The idea of the bench-effect method served as leitmotif for the five training centres when they planned their advisory and training services. It was also the binding element among the development partners. Success factors The members of OderSpree" in East the development partnership named "Schrittmacher Brandenburg defined a list of success factors for entrepreneurial activities and for the development of personnel that bear the same importance in every competition, be it in the most attractive industrial location or in any competition or benchmarking among companies. These crucial factors are: Personality of the entrepreneur Employees and teams Customer relations Corporate strategy and planning Products and services Co-operations and networks Controlling tools System and process organisation Quality management IT and knowledge management As a next step, the development partners defined the areas of learning that are interlinked with these success factors. They decided which institution or training centre was going to focus on which area of learning, taking into consideration their individual competences and their access to the single target groups. As a result, the project partners determined five learning fields. Learning fields TFH Wildau - Strategy & Market • • • • • • • • • • Strategic awareness Strategies in the life cycle Strategies for marketing and market positioning Management and planning techniques Market research Identifying target groups Assessment of needs Customer relationship management Customer loyalty programmes Sales planning 12 prof.dr.sc. dieter walter dr.sc. ingo klein bbw Bildungszentrum Frankfurt/Oder - Organisation & Controlling • • • • • • • • Enterprise structure and organisation Process organisation Identifying, describing and monitoring of business processes Controlling as an instrument of internal management of an enterprise Strategies and tactical controlling Instruments of controlling National and international controlling Terminology IHK-Projektgesellschaft mbH Frankfurt/Oder – Co-ordination • • • • Coordinating the work of the project partners Acquiring participants Public relations Reporting and documentation, project settlement Handwerkskammer Frankfurt/Oder – Know-how & Quality • • • • • • • • • • • • • • • Problems relating to know-how/knowledge management Document management The international market as a chance Developing knowledge to competence Basic IT knowledge/know-how Application software IT office and hardware system technology Communication techniques Internet services and technologies Information procurement Company presentation Quality management The optimal enterprise Certifications and product approvals Quality management in cross-border economic transactions 13 prof.dr.sc. dieter walter dr.sc. ingo klein DAA Brandenburg-Ost – People & Competences • • • • • • • • • • • • • • Personality of the entrepreneur – self-management Personality of the entrepreneur as a model External communication Internal communication – personnel management Intercultural competence and language acquisition Identification with international target markets Employees as business partners Agreement on objectives, profit sharing Corporate communications Teamwork and the ability to work in a team Healthy working environment Time management Stress at work with co-workers and customers Working atmosphere IHK-Bildungszentrum Frankfurt/Oder - Products & Collaborations • • • • • • • • • • Establishing cooperative networks Initiating of collaboration, the ability to cooperate Integrating SMEs into communities of interests, supply relations Product rating Defining products and business fields Product presentation Company presentation Portfolio techniques Product and market cycles Product safety 14 prof.dr.sc. dieter walter dr.sc. ingo klein 2 Sources of the bench-effect method 2.1 Overview We did not have to reinvent the wheel to develop the bench-effect method. All we had to do was to study business and management literature and recombine old elements in a new way. All methods and systems that we looked into were developed for large companies and viewed all issues from their perspective. This approach was quite a serious problem for us because we intended to focus on SMEs. Most of the methods originate from Anglo-Saxon countries. The general trends for the implementation of new methods and systems are also set in those states. One of the biggest challenges was to accurately assess how suitable these methods and systems could be for SMEs in Brandenburg. A further challenge was to apply these methods in a creative manner under the circumstances of SMEs in Brandenburg, while taking into consideration that these circumstances differ from the ones described in the Anglo-Saxon literature. The following four fields were carefully studied to draw knowledge and inspiration that could be used for the bench-effect method. These fields clearly overlap and interact at different points. quality management, business excellence benchmarking, best practice bench-effect method learning organisations, knowledge management, benchlearning change management 15 prof.dr.sc. dieter walter dr.sc. ingo klein 2.2 Benchmarking and best practice The most apparent and direct source of the bench-effect method is benchmarking. Benchmarking is defined as a process of target-oriented and systematic comparing products and services, organisational structures and business processes of different enterprises, organisations or business units. Benchmarking is used as a management and controlling tool. Benchmarking is an effective method to integrate external know-how and knowledge rapidly into one’s own company. Knowledge that emerged from a benchmarking project is praxis-oriented per se, since it originates from the praxis and has already been proven. If we assume that there is an exemplary solution for every problem, every activity, and every concern, then the first and most important aim of benchmarking is to detect the corresponding "best practices". Excursus: The origins of the notion benchmarking The technical terms "benchmark" and "benchmarking" appeared in management and management theory in the late 1970s and early 1980s and spread over the whole globe ever since. We can find different theories about the linguistic origin of the notion "benchmark" in the literature. These are the three most common theories: a) The word "benchmark" originates from land surveying. It denotes signposts to determine distances, height or elevation differences and to measure angles. b) The word "benchmark" means a fixed point in the textile industry. It originates from the field of weaving and was commonly used in the middle of the 19th century. c) The word "benchmark" comes from the wood processing industry. Carpenters and cabinet makers used to make a mark on their benches that indicated the length of the legs of chairs or tables. They used these marks to make sure that all legs have the same length. Today, Benchmark denotes a standard of comparison or a point of reference in the comparison of enterprises. It is used in this sense since a study about the USAmerican enterprise Xerox Corporation was published in 1979. Soon after its patent on copy technology expired, Xerox lost a large part of its market share on its Japanese competitor, Canon. It was supposed that these were Canon’s dumping prices that caused this change. The Japanese competitor brought its products to the market for prices that were lower than the manufacturing costs of similar devices produced by Xerox. Xerox set up a team of experts to analyse the Canon products. The team purchased a Canon copier, took it apart and compared its single components with the components of the Xerox device. The experts managed to find an explanation for almost all differences in manufacturing costs. As a next step, they analysed the value chains of their own company and detected serious problems in logistics and sales. The benchmarking approach was so successful that it became an integral part of the instruments used by the Xerox management. 16 prof.dr.sc. dieter walter dr.sc. ingo klein Once the best practices are detected, it is much easier to find shortcomings in the performance of the benchmarked organisation. However, the comparison offers more than that: Making the right comparison can help to shed light on the reasons for differences in performance. Identifying best Excursus: practices based on an appropriate and The notion best practice problem-related system of The technical term best practice originates from American business economics just like the word benchmarking. An enterprise that applies the best practice adopts the best procedures, utilises the best technical systems and uses the best business models. Doing so, this enterprise becomes a model for other companies in the main fields of operation. parameters is an important part of benchmarking. However, one should not forget that there is a clear difference between benchmarks Weaker companies compare their services, products, projects, methods and systems to those of the best practice enterprise in order to assess themselves and if necessary to improve their performance by setting new objectives. and benchmarking. Benchmarks are standards, comparative data and parameters, while benchmarking is a complex process. Enterprises and organisations should use benchmark information to trigger a target-oriented organisational learning process. Companies should consequently embrace and implement impulses and ideas that emerge from the learning process. Thus, benchmarking can improve performance. Generally speaking, it is paramount to the success of benchmarking to fully understand the operational processes of the best practice company and to draw the right conclusions. The main aim of benchmarking is to change products, services and operational processes. Different forms of benchmarking Researchers often make a distinction between process benchmarking versus product and cost benchmarking. Process benchmarking examines activities (tasks, strategies and operational processes) of different organisations independent of their functional structure. It delivers quantitative data and qualitative descriptions. It may be applied to simplify or accelerate processes or to integrate tasks efficiently. In the end, its goal is also to reduce costs and to optimise the use of resources. Every benchmarking starts with the questions: What should be compared with what and for what reason shall they be compared? That is why the first step of every benchmarking is to choose the reference units or processes (one or more units, external or internal units, units of a different or the same branch of 17 prof.dr.sc. dieter walter dr.sc. ingo klein industry). The next step is to find indicators that can best map the benchmarked area either in a quantitative manner (using data and figures) or in qualitative manner (by studying key processes). Afterwards, one has to decide which kind of benchmarking should be carried out: a competitive or a cooperative benchmarking. A competitive benchmarking aims to compare an enterprise or organisation with the other ones. These other companies/organisations are studied but they do not play an active or direct part in the benchmarking process. A cooperative benchmarking is carried out by different companies/organisations based on an agreement. They exchange confidential data and information that are collected and processed by a special project team. Thus, cooperative benchmarking projects need to be prepared very well and require open communication. Each participating unit must be sure that the ratio of information provided and information received is well balanced. Each participant is an observer and is being observed at the same time during the benchmarking process. This is what distinguishes the cooperative benchmarking from other types of data collecting methods. Benchmarking can also be categorised according to the benchmarking partners. Participating units can belong to the same or a different branch of industry, they can be a part of the same or a different organisation. Internal benchmarking Internal benchmarking is carried out internally in an enterprise or organisation. It usually compares different manufacturing plants, branches or distribution outlets. Internal benchmarking can but does not have to be limited to one branch of industry for example in case of corporate groups, holding companies and conglomerates that are active in different sectors. The advantage of such a benchmarking project is that comparable data is available. Its disadvantage is that it does not go beyond the limits of the organisation studied. However, a mixture of these two project structures may be a practical and useful solution for SMEs. Such a borderline internal benchmarking project can be carried out between single member enterprises in co-operation chains and co-operation networks. Competitive benchmarking Competitive benchmarking is a technique whish compares companies, which compete in the same branch of industry, on the same or at a different market. Its main goal is to compare key figures. However, such figures are often not available for competitive reasons. Competing companies might wish to conclude a co-operation agreement to carry out a cooperative benchmarking project as described above. 18 prof.dr.sc. dieter walter dr.sc. ingo klein A clear advantage of competitive benchmarking is that companies can identify their exact position in the competition. Its disadvantage is that the participants cannot look beyond the boundaries of their own sector. Intersectoral benchmarking This type of benchmarking is conducted with companies that are neither in the same branch of industry nor belong to the same corporate group. This technique offers the highest learning potential, since looking into other sectors can lead to new ideas and inspiration. Benchmarking at the corporate group level can best tap this potential. Based on different characteristics, we can identify several types of benchmarking: quantitative or qualitative carried out within or outside the company carried out in one or more branches of industry competitive or cooperative We can define different Excursus: Examples of benchmarking benchmarking Example: Benchmarking in PC development methods depending on the combination of these characteristics. Each method has its strengths and weaknesses. It is important to choose the right method according to the objectives MIT Boston has built a laptop PC for developing countries at a price under $ 100.00. Researchers in India are trying to set a new benchmark and develop a cheaper device. Example: Benchmarking in robot development Honda has developed a robot that offers state-of-the-art operating performance. It was presented at the international exhibition "The wisdom of nature" in Japan. Three competing American teams, a German team and numerous other teams in other countries started working to increase the operational performance mainly by utilising the effects of natural gravity of the running movement. One team drew inspiration from a 200 years old wooden toy. (Source: Science Magazine, March 2005) pursued. It is rather complicated Example Benchmarking based on the results to make of the PISA Study objectives, performances and operational processes of different organisations comparable and to evaluate them. The diversity of the results of the PISA study may be subject to controversial discussions but it is a fact that Finland is the benchmark. The difference between the results of single schools in Germany is 70 per cent while it is only 10 per cent in Sweden. The reason for it is that Finland, Sweden and some other countries have successfully established a system that facilitates the comparison of data and exchange of experience among schools. A few German schools achieved results similar to the Finish. However, the German educational system lacks a mechanism which enables to gain an insight into the working methods of highly performing schools, since education is a matter of the single federal states of Germany. 19 prof.dr.sc. dieter walter dr.sc. ingo klein The mentioned prominent examples of benchmarking are easy to understand, indeed. They all aim to reach or even to go beyond a clear benchmark: a price ceiling, a speed level, or a certain score in a standardised performance test. However, benchmarks in corporate practice are often more complex and consist of sophisticated scoring systems. Banks also work along elementary requirements on management systems that form a basis for credit terms. ("Basel II", see also section 3.2. "Comparison of companies in different branches of industry" of the present paper). Benchmarking is a tool for self-monitoring. The resulting data may be used for the management of companies and organisation. Benchmarking sheds light on the strengths and weaknesses of companies and thus, it aims to increase performance and efficiency compared to competitors. 2.3 Quality management and business excellence In addition to benchmarking, quality management systems (QM systems) and the so-called business excellence served as an important source and inspiration for the bench-effect method. The application of QM systems according to ISO 9001, ISO 14001, OHSAS 18001, KTQ etc. aim to improve operational processes continuously. Special standards such as ISO/TS 16949, QS 9000, VDA in the automotive industry and ITIL, BS 7799 for the IT sector are particularly important, because they also define customer requirements and include some best practice approaches. We shall mention the philosophy of Total Quality Management (TQM) here. TQM implies a continuous modernisation, development and improvement of the company. All efforts aim to make the enterprise one of the leading companies of the industrial branch by being the best in performance. Process oriented and integrated management systems according to TQM form the basis for a sustainable corporate development. Increase in personnel motivation and continuous adjustment of their work to the company’s improved operational processes play an important role in TQM. The introduction of modern and balanced valuation systems was the precondition of a relatively recent tool: the balanced scorecard that is used in professional process management systems. 20 prof.dr.sc. dieter walter dr.sc. ingo klein In general, modern QM systems must fulfil the following requirements: set a corporate strategy and define the corresponding parameters consider human resources development as a strategic task aim for continuous improvement include a consistent orientation of the company to customer satisfaction embody a systematic product and process development include detailed and systematic advanced quality planning include systematic product testing and process assessment observe cross-industry product and process release regulations provide proof of competence and accuracy of the measuring instruments used consider special aspects of product liability, occupational safety and environmental protection ensure a ban on inadmissibility of certain elements by the company provide documentation on the maintenance and efficiency of processes used QM systems should provide the following benefits: make quality comprehensible to employees and thus, enable them to perform the required quality close vulnerabilities in the quality management system reduce risks in case of organisational negligence and product liability initiate a continuous improvement in all areas of the enterprise improve the flow of information reduce confusion and misunderstanding by introducing clear definitions make the enterprise less dependent on the know-how of single employees increase productivity by improving process orientation in all fields exploit cost saving potentials lead to competitive advantages (Source 19) The concept of business excellence is closely linked to QM systems. The business excellence model of the EFQM (European Federation for Quality Management), for example, aims to support enterprises on their way to TQM by providing appropriate guidelines and recommendations. The E.F.Q.M. model® is a registered trademark of the EFQM and is based on the premises that excellent results in terms of performance, clients, staff and society can be achieved by a management that raises policies and strategies, staff and partnerships, resources and process to a high level. 21 prof.dr.sc. dieter walter dr.sc. ingo klein The open basic structure of the E.F.Q.M.-Model® enables numerous approaches, which aim to achieve and sustain excellent performance. In spite of the open approach, there are a few basic concepts that form the fundament of the E.F.Q.M.-Model®: achieving balanced results adding value for customers leading with vision, inspiration and integrity managing by processes and facts succeeding through the development and participation of staff enabling continuous learning nurturing innovation and improvement building partnerships taking responsibility for the public The above-mentioned fields stand for single criteria. Based on these criteria, we can assess the progress of an organisation on the way towards TQM. This model also includes a mechanism within the framework of self-assessment that helps to evaluate changes and identify potential improvements. One of the core elements of this model is the so-called RADAR methodology. This acronym refers to the following components: Results Approach Deployment Assessment Review The application of this methodology can help enterprises to define the desired results to plan and develop a suitable approach to deploy this approach to assess and refine the approach 22 prof.dr.sc. dieter walter dr.sc. ingo klein 2.4 Change management Benchmarking, QM systems and business excellence aim to bring about systematic changes in enterprises and organisations. Thus, they are directly connected to change management. Change management is another source of the bench-effect method. Workforce and management are usually rather sceptical about changes at first. People often associate changes with uncertainties about the future. They tend to perceive changes as a threat and risk to their own perspectives. Changes often imply rationalisation measures and cost reduction, and lead to job losses. Thus, it is no surprise that people do not respond to changes positively. Every project management manual suggests to prepare the parties involved for the upcoming changes by providing comprehensive information in time. In this respect, change management should also include training measures. It is crucial for the company’s success to convince the affected managers and staff members that the planned changes are feasible and realisable. Plausible benchmarks, i.e. practical examples of other enterprises or organisations, are the strongest arguments. This is the reason why benchmarking and change management are so closely interlinked. Concisely, the largest obstacles to successful implementation of changes are poor management, motivation deficits, and communication problems. The results of the study on the motivation of staff members are notable indeed. On the average, half of the staff members backed out of change requirements and tend to block it. The number of change objectors was double as high as the number of people that actively promoted the change process. 23 prof.dr.sc. dieter walter dr.sc. ingo klein Congruence in the Excursus: change design across different fields and the The origin of the notion change management accord of hard and soft factors is essential for the success of the change process. The more comprehensive a change process is the higher are its The notion change management emerged during the development of change management theory in the USA in the 1930s. The scientists Roethlisberger and Mayo conducted experiments in the plants of the Western Electric Corp during an analysis on performance improvement. Much to their surprise, they discovered that the attention paid to the employees influenced their performance much more than actual changes of their working conditions. Change management comprises all tasks and measures that aim to implement new strategies, structures, processes, systems or approaches and thus, lead to a significant change within an enterprise or an organisation. chances to succeed. Statistic analyses prove that there is a close correlation between the level of motivation and the success rate. In the past, change agents were appointed in the management to enhance the change process. Change agents are experts in project management, conflict management, and communication techniques. Some companies have employed such external experts for a limited time. However, the trend is towards entire change teams instead of only one change expert. Managers of large enterprises are expected to possess change agent skills. Thus, appointing special change agents is more of an exception. We hold the view that SMEs need support in change management. External change agents can provide the necessary support. „To make a change projects successful, it is not enough to address the obvious but we also have to take account of the complexity of human attitudes and behaviours. Motivation, which is essential for the change process, cannot be achieved at the push of a button. It assumes that employees and managers perceive the congruence in the perceived framework conditions and a clear orientation with regard to the way and objective ahead. (Source 5)“ Three important factors determine the success of change processes according to results of a company survey carried out by the Technical University Munich and C4 Consulting Düsseldorf (Source 5) during their mutual study. These factors are: motivation orientation and congruence 24 prof.dr.sc. dieter walter dr.sc. ingo klein 2.5 Learning organisations, benchlearning knowledge management, and Companies and organisations should be capable of learning to succeed in implementing benchmarking, QM, business excellence, and the changes they may bring. The capability of learning is the key to every qualitative change within an organisation. The term learning organisations generally refers to adapting organisations that are capable to react dynamically to internal and external changes. It is understood that we refer to the single members of the organisation and not the organisation as a whole when we speak about the capability of learning. In an ideal situation, a learning organisation is a system which is constantly in motion and which embraces external changes as a stimulus for development and adaptation processes. That is why the methods and problems in the development of learning organisations provide valuable information for SME networks as well as for managers and staff members of single enterprises. To achieve this goal, various factors are required, such as common visions and objectives, communication and transparency, team spirit and co-operation, conflict management skills and participative leadership, process orientation and the willingness to support new ideas, and last but not least a well functioning knowledge management. Knowledge management plays a prominent role in benchmarking, change management, and learning organisations. 25 prof.dr.sc. dieter walter dr.sc. ingo klein Benchlearning The publication Excursus: "Benchlearning – Good Examples as a Lever for Development" The origin of the notion and of the theory of learning organisation written by a Swedish team of authors Bengt Karlöf, Kurt Lundgren, Marie Edenfeldt Froment was a good source of inspiration The notion "learning organisation" was introduced by Peter M. Senge’s book "The Fifth Discipline" published in 1990. Back then, he was the director of the Center for Organizational Learning at the Sloan School of Management of the MIT. He is the founding chairperson of the Society for Organizational Learning (SoL). Senge defines five approaches or disciplines to develop learning organisations: for the conception of our project "Bencheffect – crossing border – involvementoriented learnshops in SMEs". The English translation of the Swedish paper was published in 2001. According to the authors, „Benchlearning can be described as a combination of 1. Personal mastery – It includes the development of the personalities and capabilities of the staff members of an organisation. It deals with ways to strengthen individual perception, questioning and listening techniques, and questions about the individual contribution of the staff members within the organisation. 2. Mental models - What implicit and explicit basic assumptions have developed to explain the world around us? The main issue of this discipline is to visualise the implicit and explicit basic assumptions employees have about their environment and business environment and make these assumptions subject to discussions and development. 3. Shared visioning – Shared visions emerge if the members of an organisation understand and accept their common objectives and if they are able to internalise them emotionally. Each and every member has to understand what s/he has to do in order to achieve the common objective. business development and organizational learning.“ (p. 1) They characterise benchlearning as an interaction of four building blocks. These are: efficiency team learning broad participation good examples We shall explain these four elements in 4. Team learning – Joint learning and consulting increases the value of a team. Their common value will be higher than the sum of the value of the members. The methods applied include e.g. dialog or interactive mind mapping. 5. Systems thinking – Thinking in systems is a holistic approach that is used to describe the mechanism of action and expected behaviour in a symbolic formal language. This description can help to identify typical patterns of behaviour, which then can be discussed and revised. In a next step, we can simulate the system behaviour by using the system dynamics method. Examples: fixes that fail, accidental adversaries and shifting the burden. The last approach includes the findings of research in the filed of system theory, sociology, and cybernetics. According to Peter M. Senge all five disciplines are essential for building a learning organisation. These elements interact in development processes and help to improve the capabilities needed in the organisation gradually. detail. 26 prof.dr.sc. dieter walter dr.sc. ingo klein Efficiency According to the authors, benchlearning refers to different methods to increase the efficiency of single employees and the efficiency of the company as a whole. Thus, the ultimate goal of benchmarking is increasing efficiency. The authors distinguish between two ways to increase efficiency. It is understood that the traditional way to increase efficiency is to increase productivity. It all comes down to the relation between the resources used and the output achieved. Or simply said: doing things right. In this context, it means: doing things at the best price. If it comes to a comparison, it is just as important to ask questions about the customer value: Do we offer the right product or service measured by the changes of market demand, the preferences of customers, and the offer of our competitors? Enterprises do not have to ask these questions every day. However, they should ask themselves another question regularly: Are we doing the right things? There is another underlying question: Are our prices adequate? Is the price-performance ratio acceptable for our clients? Thus, this question cannot really be separated from the first aspect of efficiency. P. Womack / D.T. Jones give a clearer definition of the same context in their book "Auf dem Weg zum perfekten Unternehmen" published in Munich in 1996. They carried out a detailed analysis of the experience of the Toyota concern and its medium-sized suppliers over several years. Womack and Jones state that optimising the value chain (doing things right) makes sense only if it refers to the creation of products that are awarded by the customer (doing the right things). (Source 14.) We would like to point out that this question is very explosive in East Brandenburg given the fact that East Brandenburg has a direct border to Poland. The situation is particularly severe in the case of labour-intensive services. Many Polish craftsmen and service providers entered the German market after Poland joined the European Union. This applies especially to services consumed by the broad public. Let us take bride and groom attire as an example. Wedding attire and accessories usually need custom tailoring or adjusting. German providers had hardly had any chance to offer these timeand care-intensive services. Their price-performance ratio was not acceptable for their customers when compared to their Polish competitors. 27 prof.dr.sc. dieter walter dr.sc. ingo klein Team learning We can distinguish two components of learning: The first component is the business-related part of the learning processes that aims to increase the efficiency of the enterprise. They often refer to the effectivity of managers and employees. Target oriented qualification schemes and retraining programmes might become necessary e.g. if a new technology is introduced. However, learning has also individual component which applies only to the single manager or employee for example to maintain their ability to learn, i.e. competence in methodological competency. To put it simply: learning how to learn. If we concentrate only on the first component, the affected people might perceive the learning process as a threat and react rejecting. However, focusing only on the second component, namely, on individual learning might as well cause some difficulties. E.g. employees that participated in individual qualification programmes might get frustrated if they see that nothing has changed in the enterprise and especially in the management. Subsequently, teamlearing includes both components: Learning in groups and experiencing individual progress. Broad participation Benchmarking is traditionally a top-down approach, i.e. from the management to the employees. Let us recall the example of Xerox: The Xerox management studied the benchmarks set by Canon. Based on the findings, it was the management that made all decisions. These decisions affected the entire Xerox staff and not only in a positive way, since some of the management decisions implied a reduction in workforce. The benchlearning approach is a bottom-up approach. It assumes that the affected people must be included in the change process right from the beginning. The aim of benchmarking is to see where we are in comparison to others. Benchlearning emphasises the inspiration of all affected people to change and focuses on a broad participation. This is how benchlearning supports change managements. In order to be successful, change management must include the affected staff members as far as possible. Corporate development means a change in the behaviour of the affected people. We all know that frustrated staff members work strictly to rule. 28 prof.dr.sc. dieter walter dr.sc. ingo klein Good examples Surprisingly, it is rather difficult to build on the good experience of others. People prefer to reinvent the wheel. They do so even within the same organisation. But why are people so ignorant? – According to the authors of "Benchlearning", one of the reasons for ignorance is that the individual performance of managers (self-made man) is evaluated higher than the will to see and learn how other people do things. Let us consider an example for lacking self-reflection: The University of Michigan carried out a survey in which they asked US top managers about the position of their enterprises in comparison to their competitors. Ninety per cent of the participants said that their company was better than the average. Twenty-five per cent of the managers interviewed claimed that their companies are among the top 10 %. Benchlearning helps to achieve a more realistic self-reflection. Building on the innovations and experience of others can finally lead to progress. The sum of other people’s performance represents a much larger intellectual capital to tap than one’s own. 29 prof.dr.sc. dieter walter dr.sc. ingo klein 3 The functionality and the practical relevance of the bench -effect method 3.1 Basic idea and functionality The development partnership "Schrittmacher OderSpree" issued an information brochure to acquire project participants. This brochure addresses both enterprises and employees. It describes benchmarking and bench-effect as follows: „Benchmarking denotes the comparison of one company with another one – actually with the best one - plus the wiliness to change one’s own company based on the comparison results. This is what every enterprise does, even the smallest one. This comparison process might have a different name and it is often less structured. The "Schrittmacher OderSpree" network offers a special support to companies and freelancers in East Brandenburg. We help to systematise this process and increase the learn effect and bench effect respectively as well as decrease or minimise efforts and costs at the same time. analysing the company’s activity benchmarking comparing with other companies exploiting improvement potentials qualification in education centres bench-effect As a first step, the company is examined carefully. Where is the enterprise now? How did it achieve its previous success? Where are its opportunities? 30 prof.dr.sc. dieter walter dr.sc. ingo klein What were the things that did not work out and why? The reflection of the company must be realistic and critical. The next step is a comparison with the best-in-class company. Usually, there are minor or major differences in results. However, this is no reason for panicking. It is a reason for taking targetoriented action. Acting is much easier than one might think because now we know precisely what the shortcomings of the system are. Now, that the deficiencies are visible, it is much easier to see what changes are necessary. The task is to subsequently close the gaps and eliminate shortcomings. Enterprises receive a specific, custom-tailored development programme, which includes the necessary qualification, consulting and individual coaching. The weaknesses of the company were identified during the initial analysis. Now, it is easier to concentrate on what is really needed. For example, we can find out an avoid qualification programmes and ad-hoc actions that are superfluous, thus saving both time and money. The new know-how has an immediate positive effect if applied and implemented in your company in a professional manner. Now, that you know which way to take, your company has a good chance to compete at the highest level.“ (Source 20) In addition to this short description of benchmarking and bench-effect, the mentioned brochure presents mainly the different qualification programmes of the five training centres. This short extract from the brochure clearly displays the intention to motivate enterprises to participate. It emphasises one of the basic principles of the bench-effect method that is to find out where we stand and learn from good examples by comparing ourselves to others. This means at the same time that we need to create a pressure to change and to reverse the burden of proof, i.e. not to justify that we need to change something but to recognise why it should not remain unchangeable. Now that it is obvious that someone can do it better than we do, we could change it as well. Thus, this approach also applies a change in attitude and behaviour. There is a common misconception: Benchmarking does not necessarily lead us to imitation. The aim of benchmarking is to find inspiration and creative individual solutions. Positive reference examples have a clear advantage in comparison to the strategic goals set by the management: They are realistic for they have already been achieved by others. 31 prof.dr.sc. dieter walter dr.sc. ingo klein Realistic goals increase the ambition of the members of an organisation. Bencheffect shows at the same time where the enterprise stand and thus, it creates a creative tension. Large enterprises and consulting companies were pioneers in benchmarking and knowledge management. More and more SMEs join in as the competition increases. Rapid technological progress, especially in the IT field, shows the key to success gradually: The future of companies depends increasingly on their ability to acquire new knowledge efficiently and to refine and utilise knowledge developed in their own companies. Our five training centres offer custom-tailored and, in most cases, complementary qualification schemes to address this issue. SMEs are per se small and often face an information overload. Companies have to process incoming information in a professional and targeted manner. They also have to store and update the knowledge of their own company. Small enterprises tend to work along short-term strategies and lack appropriate documentation. In general, SMEs depend more on the knowledge and skills of single employees than larger companies do. Experience, trade knowledge and customer knowledge are mostly stored in the heads of a few experts. This fact can become a risk if the experts decide to leave the company without passing on their knowledge to other employees. Large companies may have problems identifying and distributing knowledge, whereas SMEs more often have difficulty acquiring and processing knowledge. However, SMEs have a few advantages in the field of knowledge management. These enterprises are usually simply structured and the exchange of information is faster, since the ways of communication are direct and informal, and the affected people know each other personally. Handicraft enterprises have a long and proven tradition of passing on expertise. Knowledge management systems are used for the collection, storage and distribution of information as a rule. This is the side of the information providers. Problems usually occur when information needs to be transformed into knowledge. This represents the side of the information receiver. This means that the receiver does not embrace and internalise the information provided. The objectives are clearly defined, and thus, bench-effect stimulates a new way of learning: the way of learning organisations. A learning organisation is capable of creating, learning and transferring knowledge. Such an organisation is able to adjust its behaviour in a way that reflects new knowledge and insights. 32 prof.dr.sc. dieter walter dr.sc. ingo klein The bench-effect method aims to support organisations to modify their behaviour according to what they can learn from good examples. (It is assumed that one can and should learn from bad examples and case studies too. This is the basic principle of learning practiced at Anglo-Saxon business schools like Harvard and Stanford.) It is quite a big challenge for SMEs to conduct a comparison or to work on the development of their companies in the very sense of benchmarking and bencheffect method. However, it is inevitable if they want to develop in a successful way. We are going to explain two forms of comparison in detail in the next two sections. These forms are: comparison of companies in different branches of industry comparison of companies within one branch of industry We are also going to illustrate the practical relevance of benchmarking and bench-effect. 3.2 Comparison of companies in different branches of industry When we compare one company with another one, we usually encounter differences that might make a comparison rather difficult. In some cases, it might even seem impossible to compare companies. As the proverb goes, "You cannot compare apples and oranges". These difficulties might discourage employees. As a result, they do not even try to conduct a systematic comparison with another enterprise because they think that these things cannot be compared anyway. However, enterprises must face up to comparison when they apply for a credit from their bank or even if they need an appropriate increase of their overdraft credit line. It is an everyday task of banks to test the credit standing of their customers. It does not matter whether the bank is a major international bank or a small savings bank. It applies both to private and corporate customers of all banks. For this reason, it can very well make sense or be inevitable to look at one’s own enterprise from the perspective of a bank and to assess the company according to the criteria with regard to the issue of credits from time to time. If the entrepreneur or the manager of the company assumes the bank’s role, he will see that his company can indeed be compared with other companies of the same branch as well as of other branches of industry. 33 prof.dr.sc. dieter walter dr.sc. ingo klein Example: Lending practices of banks according to the criteria of Basel II One of the basic principles of banking is that banks must hold appropriate capital against the loss of all loans granted. The minimum capital requirements of a bank vary according to the structure of its customers. The weaker the credit quality of the borrowers the higher the required bank capital. The central banks and regulatory authorities of leading industrial nations issued their recommendations in a document called "New Basel Capital Accord" or "Basel II" in 2004. The members of the Basel Committee on Banking Supervision agreed in this paper to recommend an approach for the assessment of borrowers that is much more comprehensive than the previously used approaches. The creditworthiness of applicants is classified at least in nine rating grades. Banks must prove that they made their assessment based on figures specific to the enterprise. This assessment must be confirmed by an independent external rating, for example, by auditors or by professional associations. The rating process is rather expensive and complex. This is why most credit applications of SMEs may be treated as retail loans. Banks may deviate from the strict criteria of Basel II if the applying company’s turnover does not exceed five million euro and the credit amount is lower than one million euro. This regulation can be seen as a release for SMEs. However, there are some concerns that in case the detailed assessment of creditworthiness of an SME would not be worth the effort, banks would demand more securities from SMEs, make access to credits more difficult, offer less favourable conditions or even reject a credit application. The general rule is that each enterprise must undergo credit rating independent of its size. In order to get a credit in the first place and to get it at favourable conditions, each company faces the question: How can I convince my bank that I am a good borrower compared to other debtors? One of the problems is that the catalogue of figures is not standardised and each bank uses its own assessment method. We can distinguish different rating criteria, although banks always try to compare figures specific to a certain branch of industry. These criteria are the following: Quantitative criteria: return on sales, capital ratio, liquidity planning, return on assets, cash flow, dept-to-capital ratio, ratio of personnel expenses, ratio of material costs, growth in turnover, existence of a comparison of planned and achieved goals, and an appropriate business plan for two to three years Qualitative criteria: state and perspectives of the branch of industry, market positioning of the enterprise, customer orientation, innovation ability, success factor specific to the company, entrepreneurial qualities, organisation and IT systems, long-term strategy, investment risk, information policy towards loan creditors, securities Application of business management and control tools: adequate and up-to-date accounting, appropriate cost calculation and cost control, liquidity planning, breakeven analysis, preliminary and follow-up calculation of products and services, accounts receivable management, production monitoring, quality management You can find further information on Basel II on the following Internet pages: www.dihk.de , www.handwerk.de , www.kfw-mittelstandsbank.de , www.bafin.de , www.handwerk.com , www.zdh.de , www.sap.com 34 prof.dr.sc. dieter walter dr.sc. ingo klein Conclusion To sum up, entrepreneurs and their responsible employees have to understand that comparing their company to other firms is worth the effort. If they do not do it themselves, then others will do it. No one can escape comparison. Those who conduct a comparison, take action. They can make necessary adjustments in good time. Thus, they will be in a better negotiating position if they want to borrow from a bank. 3.3 Comparison of companies within one branch of industry It is clear that the comparison of data in different industries is important. However, we also need indicators specific to a certain industry. Inter-trade organisations, guilds, chambers of crafts, entrepreneurs’ associations collect industry specific data on a regular basis and on special occasions. Special institutes and consulting firms carry out detailed analyses of such data. Relevant reference data is published in professional journals, newsletters of associations, statistical office publications or priced publications of studies. Such data is even more conclusive if it does not only refer to a certain branch of industry but is restricted to the region of the company interested in a comparison. The following example shows a case in which industry specific data as well as region specific data have a special relevance. Example: A comparison of the development of tourism as well as the economic situation in the hotel and catering business between certain travel areas and single federal states of Germany The Ostdeutsche Sparkassen- und Giroverband (East German Saving Bank Association) publishes a tourism barometer each year. This publication includes qualitative and quantitative comparisons between the federal states of Germany and single tourist regions. Indicators specific to a certain branch of industry are often particularly conclusive. Hotel and catering enterprises need to know how well they perform concerning bed occupancy rate, profit margin, cost for personnel and cash flow. It is important that they can compare their performance with those of their competitors in other federal states, in their own federal state and especially in the travel area of their business activities. The Tourism Barometer 2004 states that the room occupancy rate in the state Brandenburg was 34 per cent in 2003. Brandenburg was close to the average of the former Eastern German states. Mecklenburg-Western Pomerania set the benchmark at 45.2 per cent, followed by Saxony’s 38 per cent. Even more informative for hotel operators in Brandenburg is the comparison of room occupancy rates in the single travel areas in this federal state. Potsdam was leading the race with 43.7 per cent followed by the Dahme Lakeland with 40 per cent. The two East Brandenburg administrative districts Märkisch-Oderland and Oder-Spree Lakeland with 31.3 and 31.0 per cent performed under the t average of Brandenburg which was 34.0 per cent. (Source 10, page 35) Changes in the number of visitors in a region as well as the bed and room occupancy rates directly influence the business results of service providers in the tourism industry. According to the tourism barometer, the profit margin of the catering business was merely 0.1 per cent in Brandenburg in 2002. It was 35 prof.dr.sc. dieter walter dr.sc. ingo klein 0.3 per cent in Saxony and 1.4 per cent in Mecklenburg-Western Pomerania. Schleswig Holstein set the benchmark at 5.0 per cent in the comparison among all federal states. (Source .10, page 61) However, it is not enough to have reliable reference data – just like the ones in the above-mentioned study – and to know the differences between one’s own business indicators and that of the competitors and the benchmark setting enterprise. This is just the first part of the task. The second part is to find out the reasons for the difference in the figures. This is where qualitative benchmarking begins. If we take the example of the tourism industry again, it means that service providers would have to study the operational processes and strategies of the best competitor in order to understand the reason for their lead. Finally, they would have to analyse these reasons and draw their conclusions. One of the proven methods was used as example by the Brandenburgische Tourismusinstitut (Brandenburg tourism institute - BTI), Bad Saarow. The BTI organised and moderated trips for tourism service providers and political decision makers from East Brandenburg. They travelled to successful tourist regions and spa towns in states that were not in a direct competition with their own region. The aim of these trips was to sense and experience an unknown surrounding in a group. These trips were successful not only because the participants could see and feel everything themselves, but also because they got the opportunity to discuss their experience with the tourism service providers whom they visited and draw conclusions from what they have seen for their own work. Other industries use other indicators. In case of the construction industry, backlog of orders and weather-related short-time work play a particular role. Each enterprise has to define which of the indicators are important in their industry and how they can acquire the necessary data. 36 prof.dr.sc. dieter walter dr.sc. ingo klein 4 Experience gained due to the application of the bench-effect method 4.1 The application of the bench-effect method under the specific East Brandenburg conditions The original idea of the bench-effect method is determined by a logic that has emerged from learning and development theory. In practice, this logical and methodological sequence of work and development steps (compare page 62 et seqq.) had to match the extremely diverse conditions of the SMEs and their employees, and, finally, be adjusted to practical requirements. Furthermore, the significantly differing subjective expectations and blockades of the responsible persons in the single SMEs had to be considered during the planning and execution of bench-effect projects. The participants in the SMEs responded in a completely different way to almost identical business-related problems even within the same industrial sector. The relevant factors were: The personal experience of the decision makers in SMEs (Obviously, there are significant differences between those who had started their businesses in the GDR, those who became self-employed in the field of their primary occupation after the German reunification, and the so called "career changers") Educational background and knowledge of the decision makers (low-educated family background seems to strengthen the aversion to further professional training and external support) The current situations of the single SMEs have a considerable influence on the willingness to accept external support. (As a rule, less well-educated "old-fashioned" entrepreneurs do not see the necessity to participate in EQUAL if their businesses run well. However, the situation turns out to be completely different if the very existence of their businesses is under threat. Though, even in these cases, they merely concentrate on the solution of the current problem for the most part.) The willingness to accept external support obviously depends on the prevailing management culture of the SMEs which in turn is strongly influenced by the personal characteristics of managers and employees as well as by the cultural imprint of the company. The co-operative management style usually facilitates the work in EQUAL projects. 37 prof.dr.sc. dieter walter dr.sc. ingo klein A person who makes a decision about the participation of the SME in EQUAL finds him-/herself in a certain psychological situation with respect to his/her management of the company, the recognition of his/her management style by employees, and also with regard to group dynamics (processes). The stronger the leading role of the decision maker and the more undisputed his/her claim for leadership, the easier the access to EQUAL, and the more comprehensive the wish for cooperation. EQUAL can be also abused. Under certain circumstances, decision makers in SMEs tend to use external opportunities to solve internal problems that have nothing to do with the educational and performance objectives of the EQUAL programme. It occurred that due to the participation in an EQUAL project, employees were put under pressure that otherwise could not be explained by internal factors in any reasonable way. In some cases, decision makers simply sought for a sort of a compensation for the missing recognition of their work. They tried to set a clear sign of their own importance by making contact to external trainers and coaches. It was essential to make these diverse realities to the initial point of the bench-effect method and it is not going to change in the future application of the method either. If we want to motivate people to some changes in their behaviour pattern, we have to meet them where they have got to as a result of their own development, based on their subjective attributes, circumstances and wishes, and not where analysts would expect them to be, based on the objective situation in their companies. As a result, companies join EQUAL projects in completely different ways. Sometimes, unlike the logical sequences of work steps in the original bench-effect method, single steps have to be selected even in a rather random way. The involvement of the interested parties is often discontinuous and not permanent. Hence, the goals and working steps have to be monitored and under certain circumstances - revised more frequently. Although SMEs get involved in and develop within an EQAUL-project in quite different ways, certain behavioural patterns (beyond single individual cases) have proved practical. Some elements of the method are worthy of generalization and can be recommended for further use. 38 prof.dr.sc. dieter walter dr.sc. ingo klein The planning of specific projects in all training centres was based on: the basic idea of the "Bench-effect – crossing border – involvement-oriented learnshops in SMEs", the organisation of a continuous process – starting with the analysis of the current situation, over the definition of objectives by conducting best practice comparisons, to the derivation of qualification measures, and the subsequent design of change processes as well as their active implementation. The specific regional conditions in East Brandenburg have determined the structure of industrial sectors and the needs of participating companies and persons during the implementation of the project. These conditions also determined the specific design of the bench-effect method in general, as well as its essential elements in particular. Benchmarking The basic idea of the bench-effect method implies the objective to turn benchmarking into a suitable starting point for a transformation process in SMEs on their way to success in business. The proposed procedure prior to the project beginning suggested the following sequence: Identifying an initial partner for the benchmarking project (We were looking for a strongly represented industrial sector, preferably large enterprises, and a company that could be regarded as a model to follow.) Analysing operational processes in the initial partner’s company in order to develop an appropriate system of indicators suitable for benchmarking (What indicators would be relevant for a comparison?) Editing the system of indicators in order to create a questionnaire that delivers measurable results Identifying benchmarking partners Contacting and recruiting benchmarking partners for the project Concluding the contract between the benchmarking partners (including the scope of co-operation, the evaluation method, project objectives, and the obligation of confidentiality) Processing questionnaires by the benchmarking partners Evaluating questionnaires, identifying benchmarks, and deriving best practice Organising workshops for the benchmarking partners in order to evaluate the specific stages of the project Making offers for joint learning, general or custom-tailored business programmes for the participating companies 39 prof.dr.sc. dieter walter dr.sc. ingo klein The members of the development partnership put a great effort into the search and recruitment of partners for classical benchmarking projects. We were prepared for both a process benchmarking as well as an indicator benchmarking. We designed competitive and co-operative models and were open to both benchmarking within a single industrial sector and an intersectoral benchmarking. We have to admit, that we have failed to follow the classical logic of benchmarking. According to our experience, the classical approaches have failed for the following reasons: 1. It is a common view that the potential benefit of benchmarking is much smaller than the risk that might occur when providing sensitive business data to other companies within the same industrial sector. (The same applies to sharing information between different industrial sectors in the same industrial region.) 2. The strategic management of a company by means of data records, indicators and process analyses is obviously not widely spread. Most managers make their decisions based on their experience (so-called "gut decisions"). Frequently, solvency is the most important or even the only management variable that is monitored constantly. Hence, the principle of benchmarking is relatively far from the current business practice of companies. We have launched a sector-related indicator benchmarking project in co-operation with a municipal undertaking for complex services and property management. It followed this classical sequence and seemed to flourish relatively well. However, even this promising project had to be discontinued shortly before the decisive phase began, like all our project efforts that followed the classical project implementation pattern. 40 prof.dr.sc. dieter walter dr.sc. ingo klein Example: Benchmarking project in a municipal undertaking Shorthand report of the project implementation in ten steps Step 1: Acquisition idea A development partnership (DP) consultant learns about the activities of the Entrepreneurs’ Association of Oranienburg. Step 2: Establishing a contact, introducing EQUAL, generating interest Potential benefits are a strong argument and convince the Board of the Association during the meeting. The benchmarking project can help the Association to demonstrate the economic advantages of a membership to its members. Step 3: Road Show – EQUAL – promotion presentations DP-consultants succeed to acquire two potential partners to participate in a benchmarking project. Step 4: First meeting with the potential partners Subsequently, the focus of efforts is OHBV (a consortium with several companies); strong interest in benchmarking in Berlin: suburban bus traffic, homogenous market with easy-to-compare parameters, no competition between the potential benchmarking partners. Step 5: Workshop with the management (2 days) Conclusion of an agreement on a benchmarking project: problem analysis, definition of project foci, action plan an time schedule, completion of all participation formalities (agreement, master data list). Step 6: Benchmarking concept (prepared by consultants) Enquiries about nine bus companies; focus on the comparison of the enterprises based on public statistical data; identification of corporate interests and objectives; assessment of the suitability of the company for benchmarking. 41 prof.dr.sc. dieter walter dr.sc. ingo klein Step 7: Workshop "Benchmarking" - Identifying indicators for the first benchmarking, - Defining future steps of the benchmarking and the transition from benchmarking to bench-effect, - Reducing the number of the identified indicators to six: those that can show the economic potential of the company without requiring much effort to acquire and process, - Defining indicators Step 8: Letter of invitation to the potential participants Mailing to the nine identified potential participants Content of the letter: - Motivation for the participation (advantages) - List of participants - List of indicators with definitions - Description of the evaluation and the further procedures (confidentiality agreement) Follow-up calls to the bus companies’ managements. Step 9: Evaluation of the benchmarking (six indicators) - Analysis of indicators, report on results (consultants) - Distribution of the result report to all participants We could not conduct this step: - Confirmation: 1 enterprise - Written refusal: 2 enterprises - Refusal via telephone: 2 enterprises The only reason given for refusal: Fear of disadvantage in the competition Step 10: Bench-effect - qualitative analysis of indicators, possibly with consultants’ support on site - workshop for participating companies which expressed their interest in participation - designing a concept of and launching of a bench-effect process This step could not be conducted in absence of step 9. 42 prof.dr.sc. dieter walter dr.sc. ingo klein Regardless of all the difficulties with the classical benchmarking models, extremely diverse benchmarking processes emerged in the course of the project. These processes markedly differed from the classical models and did not consistently follow the original logical sequence. These processes served as an important subject matter for discussions in troubleshooting groups and a starting point for work in implementing groups. Benchmarking occurred in the following forms: Spontaneous exchange of experience in all courses and workshops; Identification of best practice examples which served as an objective for moderated workshops or as training material for seminars (e.g. in troubleshooting groups in which entrepreneurs and employees with possibly identical problems worked jointly, paying particular attention to aspects like structure of ownership, industrial sectors, size of company); Establishing theoretical best values on the basis of results obtained by in-house working groups and on the experience gained during a long-term preparation of different companies to new markets. Integration of DP representatives knowledge during on the first best practice analysis of through the the enterprises participating in the EQUAL project; integration of best practice knowledge by conducting mystery consumer check (an anonymous survey and analysis of processes in different enterprises, and comparison with established benchmarks) The exercised forms of benchmarking required from the project executing organizations to look for examples of successful experience obtained in other branches of industry and in other regions as well as to intensively motivate the participants to learn and apply promising methods that can help to improve their practical work. Under the given circumstances, participants were more likely to accept competitive benchmarking than co-operative benchmarking. Intersectoral and interregional forms of benchmarking were also rather successful. However, trainers and consultants had to work hard to convince the participants to conduct a benchmarking and dispel all doubts of the participants concerning the applicability of these forms of benchmarking for their practical work. Almost in all cases, an intensive initial work had to be done to adjust the respective methods to the current situation in the companies. 43 prof.dr.sc. dieter walter dr.sc. ingo klein Trust was an essential component in the process. Participating companies were only willing to engage in a benchmarking process if they trusted the actual staff members in the training centres or if they could build up a trustworthy relationship to them by time. These psychological preconditions of the project usually emerge in a long lasting process which can concurrently provide for a guarantee that it is quite possible to define and achieve the benchmarks if you are determined to strive for it. It has proved to be practicable, to define the company’s structure and the required social competence derived from it prior to identification of shortfalls, problematic fields, potential and benchmarks in order to create a strategic awareness. Despite of this, most participating companies and individuals had to experience a sort of a "self-discovery" at the beginning of the EQUAL project. This is explainable, since one has to develop willingness to change before one is ready and willing to see the company from an outside perspective, and finally admit insights for third parties. The design of benchlearning The aim of benchlearning is to increase the efficiency of companies. It is based on teamwork and a broad participation of all stakeholders involved, and it also implies best practices in the learning process. (See section 2.5.) A broad participation and team learning have lead to significant and continuous progress during the project. In terms of effectiveness, we observed a significant progress in the optimisation of existing processes ("doing the things right") during the implementation of all project activities. The qualitative changes in the goal-oriented behaviour ("doing the right things") have lead to differentiated results. As positive results we can regard the restructuring the range of products and services range, winning new markets by altered or new products, acquiring new behavioural patterns and qualifications relevant for the labour market. Resistance against changes which can be traced back to old stereotypes and a tenacious insistence on them lead to a negative effect. All Change Management projects and qualification measures, regardless of their organizational form, have been developed on the basis of the data obtained due to company and personnel analysis which were carried out prior to individual project planning. 44 prof.dr.sc. dieter walter dr.sc. ingo klein Organisation of Change Management Systematic changes in the company, in the organisation and in the behaviour of the participants proved to be the most complicated challenge for all participants. That was reflected in the concept of the bench-effect method as well as in the single steps of its implementation and elaboration. (See sections 4.2 and 4.3.) It was crucial for the success to involve the company management, the future human resources managers, as well as all affected individuals into activities that aimed to improve the current situation towards the benchmarks. For this purpose, it was essential to inform these individuals about the as-is analysis and the derived qualification measures. The moderation of change management through trainers and tutors was essential for the success, however, it required their conscious behaviour by gradually withdrawing their support in helping people to help themselves. To make positive changes sustainable, it is required to involve all project participants – entrepreneurs, managers and personnel into transformation processes on the regular basis. 4.2 The combination of acquisition, as-is analysis, identification of qualification needs and change needs 4.2.1 Acquisition methods Acquisition is the first step in the bench-effect method. Its aim is to acquire participants for ESF programmes. It is not enough to tailor your education programmes to the needs of the companies when it comes to finding the right motivating factors. The motivation to participate in a programme should be possibly generated before such programmes are offered: ultimately, it means that demand for such programmes should be created in the first place. If the aim is to create a more or less independent demand for business training, then we will have to change the business culture, which can only be achieved in co-operation with those involved in the business. During the acquisition of participants, we could rely on long-lasting contacts to companies and individuals, who had positive experience with regard to previous programmes at the training centres. 45 prof.dr.sc. dieter walter dr.sc. ingo klein Additionally, the training centres could also use databases which contained company information provided on the basis of: membership in the IHK (Chamber of Industry and Commerce) and the HWK (Chamber of Trade), long-standing connections of the bbw (Vocational Training Centre in Frankfurt/Oder) to employers' associations, long-standing connections of the DAA (German Academy of Employees East Brandenburg) to employment agencies, job centres and trade unions, as well as the relations of the Bad Saarow branch of TFH Wildau (University of Applied Sciences in Wildau, former BTI), to travel and tourism companies and associations. The following formal tools have proven successful (to a different extent) for the acquisition of participants: Project description - brochure The project brochure issued by the development partnership (DP) offered a broad overview of the entire project, its organisation, the project partners and their programmes. It consisted of more than just the application documents for the programme and had an advertising character by addressing potential participants. The DP brochure also strengthened the partnership internally as well as promoted common philosophy and activities. However, the main aim of the brochure was to advertise the programme and recruit participants. The style and layout of the project description corresponded to the above-described aim. The circulation was large enough to cover almost all potential enterprises. (a copy was presented to the company management mostly at a meeting) At the same time, the brochure also targeted at our strategic and international partners and media, as well as other information disseminators. Flyers The centres presented their current training programmes in short advertising leaflets, which were distributed to potentially interested people. In addition, a digital version of the flyer was e-mailed to interested parties. Some training centres also informed about their regular training programmes in their six-month programme leaflet. The flyers were very well received by interested people and participants. According to the addressees, they even emphasized the importance of the training offers for the electronic age in a certain way. 46 prof.dr.sc. dieter walter dr.sc. ingo klein Presentations The development partnership prepared and used a joint PowerPoint presentation for the preparation and monitoring of all oral forms of participant acquisition. We did not have to invent anything new as far as the content was concerned. The presentation was based on the above-mentioned brochure and the individual flyers of the training centres. All training centres developed their own road show on the basis of this presentation and used them with varying intensity. It has proved to be practicable to plan the single stops of the individual road shows at existing company networks. This applied e.g. to networks such as: regional entrepreneurs’ associations, local trade boards, associations of single branches of industry (tourism, construction industry), existing co-operation networks of companies. Experience has shown that the success of the acquisition phase depended significantly on the personal prerequisites of the staff members who conducted the presentation. The following factors were crucial for the success of the acquisition: - Credibility of the involved individuals and institutions and - Degree of acceptance of the involved individuals in their capacity as consultants. Tools for the first contact The goal of the first step is to establish a contact to potentially interested entrepreneurs and employees. The form of the initial contact varies but its aim is to convince the potentially interested persons to agree to further talks and meetings. In our view, there are five appropriate first contact tools: mailings, telephone calls, road shows, competitions and indirect initial contacts via media. We made diverse experience with these tools during our practical work. In principle, it became apparent that the choice of tools, the success achieved, as well as the time required until a success appeared, depended largely on the quality and intensity of the existing contacts as well as the general involvement of the target groups. We had to be and are rather flexible regarding the tools. We also noticed that the best prerequisite condition of successful acquisition was an existing and preferably intensive working contact to the potential participants. In such cases, we were almost always able to make an appointment. 47 prof.dr.sc. dieter walter dr.sc. ingo klein The initial contact is usually regarded as an exceedingly difficult working phase. In addition to the reservations about funded projects mentioned, there is a special difficulty that has to be considered, since we usually get only one chance to acquire participants. Mailings We used e-mails as the main tool to attract potential participants. This form of initial contact has proven effective in principle. Ultimately, this is an essential auxiliary tool for oral forms of acquisition. Who sent the mailings? The co-operation office of the programme, and/or the staff members engaged in the single subprojects depending on the profile of the offers. What form did the mails have? A cover letter, a reply card and a programme leaflet, or the same documents in form of an e-mail message. Experience with reference to the efficiency of the mailings content: The covering letter should be formulated in a way that the hurdles of project participation are presented as rather low. This method proved to be good in the bench-effect project. The accompanying reply card should only state that the potential participant is interested in further communication about the programme. The reply card should allow potential participants to complete a questionnaire on their companies or bindingly declare their participation in the project. However, these options should not make a condition. Distribution of mailings: We expected a major wastage of mailings. That is why we concentrated on target groups, i.e. those individuals and companies that we assumed to be interested in such a project. This applied to persons and companies that have participated in other projects and remained satisfied. We also assumed that wastage would be smaller if we asked our strategic partners (e.g. an entrepreneurs' association) to assess the interest of their members for our project, and send our joint mailing to potential participants. 48 prof.dr.sc. dieter walter dr.sc. ingo klein Limited efficiency: One should not pitch the expectations of success in targeted mailing campaigns too high. From a marketing perspective, this product requires quite a long explanation. Moreover, this product will only sell, if people who want to apply our method accept it in the first place. (Our method can be regarded as a product but it is rather a complex offer of services.) According to our experience in the course of the project, mailings were especially successful if they were sent to people to whom we maintained personal contacts. Telephone calls In general, telephone calls are a fast and cost-effective way to address potential participants, and draw their attention to a project. All experience showed as early as in the project planning phase that telephone calls were successful only in those cases in which the callee demonstrated a high level of involvement, or if there was mutual trust between the caller and the callee. Hence, commissioning a call centre or similar service providers was not applicable and therefore, no attempts have been made in this regard. In practice, the acquisition of potential participants via telephone was limited to single cases in which staff members knew the callee well or if staff members wanted to remind an interested person of the project. Telephone calls proved to be effective after the potential participants had received the mailing, and thus, they possessed information about the project. Road show Events that are organised to inform a target group about a certain programme are called "road shows" in marketing. We found out that road shows were an essential tool to establish an initial contact to potential participants. The Project Company used a specific form of project acquisition, i.e. it organised entrepreneurs’ meetings from the beginning of the project through April 2007. These meetings contributed to the acquisition of participants and helped to compile problems. At the same time, entrepreneurs welcomed the event as a qualification programme and a platform for information exchange. Road shows were the main acquisition tool of the Project Company. However, it has not been systematically documented how many of the participants at such entrepreneurs’ meetings had actually participated in single activities in the training centres. We strongly recommend conducting such a documentation to all people who wish to apply our method in the future. This documentation can help to identify and record the need for changes, and qualification of companies and persons. Additionally, these data can help to improve the thematic and methodological design of the entrepreneurs' meetings. 49 prof.dr.sc. dieter walter dr.sc. ingo klein Competition New and unconventional forms of acquisition should be tested in the course of the project planning, if possible. Our assessment of the programme mobilisation led to the conclusion that it might be rather difficult to find a sufficient number of committed participants. The initiators of the subprojects used the expression "to shake somebody up" in this context. We assumed that all traditional forms of acquisition would abet the consideration, that something "unfamiliar" is offered to, or even imposed on potential participants from the outside again. This psychologically understandable reaction pattern should be addressed with new forms of offers that make the service offered to a desirable objective that is not too easy to achieve. Additionally, these new forms of offers should require and promote a strong involvement and independent activities of the potential participants from the very beginning. This would be the case, if we managed not only to promote the participation, but if we would initiate a competition for a precious commodity: the opportunity to participate in the project. Unfortunately, this approach has not succeeded with a few exceptions. Further training programmes and consulting on support projects are not at all rare commodities in the federal state of Brandenburg. It is obvious that competitive elements only have a chance, if the services offered within the project remain a rare commodity over a longer period of time. Indirect initial contact via the media The development partnership conducted systematic PR work during the implementation of the project. Information on the overall project was published in the regional media according to the available financial and human resources. The training centres advertised their programmes in local print media. The effect of media contact has not been explicitly determined. However, interviews with participants of single EQUAL projects revealed the following: The fact that the project appeared in the media gave many participants an additional reason to have a closer look at in the project and convinced them to participate in it. The more information the media communicated about the opportunities offered by the project, the easier it was to acquire participants at the individual level. The number of participants increased significantly if the local advertising papers published information on the time frame of the individual activities within the training programmes at the training centres. 50 prof.dr.sc. dieter walter dr.sc. ingo klein 4.2.2 The as-is analysis Many of the initial hypotheses concerning the reasonable procedure for a comprehensive and flexible external support for SMEs, which were formulated among other documents in the project support materials by the project beginning, have proved practicable in the course of the project. The materials included common analysis and consulting tools as well as corporate consulting standards for negotiations. It is highly recommended to use them – also within the future implementation of the bench-effect method. We refer to appendix 9 (Guide to the interview) as well as to appendix 10 and 11 (Tools for self-analysis). Recommended analysis tools: The above-mentioned project support material recommends the following tools for the as-is analysis of the participants: Enterprise evaluation questionnaire – long version (questionnaire of the Project Company, appendix 2), SWOT analysis, Problem evaluation, Criteria of business excellence, Comparison of indicators In the first two months of the project implementation, the enterprise evaluation questionnaire (appendix 1 and 2) was mostly used during the initial contacts to participants. The potentials, limitations and weaknesses of this tool became apparent during this process. The enterprise evaluation questionnaires proved to be an initial motivation to participate in the project. In the best case, the questionnaires even animated companies and employees to focus on an in-depth examination of their current company situation and the management style applied. However, the questionnaires were less practical tools for the actual analysis of companies. The questionnaires listed too many questions; yet, they were too undifferentiated. The reason for it was that the questions were to be answered by companies of different sizes, engaged in different branches of industry, located in different regions and at different stages of their development. Hence, the results of the evaluation of the answers were often unfounded and they did not motivate people to participate. 51 prof.dr.sc. dieter walter dr.sc. ingo klein The criteria of the analysed evaluation of the company's situation were partially unfounded or even misleading. (E.g. negative assessment of companies that had not indicated any export turnover in case of local service providers, bakeries, butcher’s shops, etc.) The importance of enterprise evaluation questionnaires as a tool for the determination of training demand of potential companies decreased as the project progressed. There were two factors that helped to convince new companies of the benefits of the programmes offered. These were the positive verbal propaganda communicated by the companies that participated in the project before, and our efforts to focus on serious pestering problems in the region and the single industrial sectors. (Examples: "First Solar Fabrik" in Frankfurt, change of the personnel structure in the hospitals in Brandenburg, increasing importance of fitness of elderly and unemployed people capable of work) The actual work in the companies and with the companies, with the managements, employees, job seekers and individuals in rehabilitation programmes made increasingly obvious that: In general, the analysis of soft skills should be intensified, and accordingly reflected in the structure of the initial analysis. It was necessary to emphasise the benefits for the companies (even) more intensively, and continue to improve the qualification of the measurement of progress. These aspects became the focus of attention due to the development and implementation of more creative analysis methods at the later stages of the project. The participating training centres adjusted the reviewed methods to the needs of target groups as exemplarily described in appendix 5, 6 and 7 by means of elected analysis tools. (The learning fields of the training centres are listed in section 1.5) For that reason, the improvements and innovations in the system of analysis tools were systematically developed as follows: In the acquisition phase, the so-called "rapid evaluation" (appendix 3) was offered to the addressed enterprises. It aimed to help managers to evaluate the company’s actual situation. The evaluation questionnaire was limited to merely six questions on the commercial viability of the company’s activities, collaboration with partners, the company’s own progress controlling methods, the quality of the employees’ work, and the company’s strategic management. 52 prof.dr.sc. dieter walter dr.sc. ingo klein The original enterprise evaluation questionnaire (appendix 1) was revised. The new version (appendix 2) was designed as a multiple-choice questionnaire. Compared to the original questionnaire, the new version included significant improvements for both the enterprises and for the evaluation, since it offered several possible answers and recommended different qualification measures. The complexity of the questions made the questionnaire very useful to identify the demand for qualification measures that were not offered by the co-operating training centres at that time. Hence, the questionnaire has contributed to the set-up of networks. However, the revised version of the questionnaire did not succeed to diminish criticism on the original version such as its unsophisticated structure, and the demotivating and inadequate conclusions in reference to the quality of the companies' management. The questionnaire was still not an optimal tool for the definition of the benchmarks. Moreover, its application was reasonable only for several purposes (gaining the participants’ confidence, reacting on specific problems of the respondents) and only combined with a personal interview. In addition, the questionnaire is too long and time-consuming. The common questionnaire of all education centres involved in the "EQUAL II – bench-effect – crossing boarder" project was originally intended to attract suitable tutors, consultants and coaches (appendix 4). It specified all learning fields offered by the training centres in a detailed and clear manner, and thus, it was suitable for identifying the potential participants’ qualification needs and their interest in change, without forcing the respondents to disclose any personal or corporate weaknesses and deficiencies. The education training centres used this questionnaire for acquisition purposes as well as for the initial analysis of needs, strengths and weaknesses. bbw (Vocational Training Centre in Frankfurt/Oder) developed its own enterprise assessment questionnaire (appendix 6), which focuses on the behaviour of the management referring to management accounting. Respondents can choose from three possible answers. All answers are given anonymously. Due to this solution, respondents can avoid a subjective oath of disclosure. It also creates a basis for a focused discussion, and for the initiation of change processes. The application of this questionnaire in workshops with the representatives of companies proved to be effective. Subsequent users of the method may flexibly tailor the actual content of the questions may according to the needs of other target groups. What is crucial from the methodological point of view, is the basic principle to obtain fast and plausible information about the structure of the qualification need and the foci of the necessary 53 prof.dr.sc. dieter walter dr.sc. ingo klein changes (individual, group and company change management). The evaluation of the information obtained is based on the relative frequency of the answers given. (According to the way respondents assess their own situations: positively, neutrally or negatively.) The experience gained while implementing the bench-effect method under the East Brandenburg conditions (i.e. the development of special evaluation systems and their application, problem analysis, potential solutions and problem shooting) is worth to be recommended for further implementation. A good example is the "Health check 50+" (Gesundheitscheck 50plus) which was developed during the project by the DAA (German Academy of Employees East Brandenburg) and was successfully applied. (see appendix 7) 54 prof.dr.sc. dieter walter dr.sc. ingo klein 4.3 Project phases, participation of enterprises According to the sources and principles of the bench-effect method as described in Section 1, the following project phases were recommended in the "support material": Modell: Ablaufschema „Bencheffect“ Gesamtübersicht 1. Akquise-Phase 2. Teamfindung 3. Analyse der Ist-Situation 4. Lern-Phase 5. Weiterführende Maßnahmeplanung German-English version Modell: Ablaufschema „Bencheffekt“ Model: Flow chart "bench-effect" Gesamtübersicht Overview 1. Aquise-Phase Phase 1: Acquisition 2. Teamfindung Phase 2: Team building 3. Analyse der Ist-Situation Phase 3: As-is analysis 4. Lern-Phase Phase 4: Learning 5. Weiterführende Phase 5: Further action planning Maßnahmenplanung 55 prof.dr.sc. dieter walter dr.sc. ingo klein At the beginning the project, we provided stakeholders with the following detailed proposal about the approach: German version Modell: Ablaufschema „Bencheffect“ Phase 1: Akquise Roadshow Mailing Wettbewerb Teilnahme Publikationen Firmencheck - Kurz Firmencheck - Kurz Firmencheck - Kurz Firmencheck - Kurz Strategische Partner Begleitende AkquiseMaterialien Firmenbegleiter Broschüre Präsentation Flyer - Reason why persönliches Gespräch Kleinstunternehmen mit 1-3 Teilnehmern Festes Seminarprogramm der Lernstätten Positive Teilnahmeentscheidung Seminarteilnahme Selbststudium Festes Selbstlernangebot der Lernstätten Unternehmen mit einer größeren Anzahl von Mitarbeitern, komplexen Lernaufgaben und einer geplanten, längeren Verweildauer in den Lernstätten zur Phase 2 zur Phase 2 56 prof.dr.sc. dieter walter dr.sc. ingo klein German-English version Modell: Ablaufschema „Bencheffect“ Model: Flow chart "bench-effect" Phase 1: Akquise Phase 1: Acquisition Roadshow Road shows Firmencheck - Kurz enterprise evaluation questionnaire – short version Mailing Mailings Firmencheck - Kurz enterprise evaluation questionnaire – short version Wettbewerb Teilnahme Participation in a competition Firmencheck - Kurz enterprise evaluation questionnaire – short version Publikationen Publications Firmencheck – Kurz enterprise evaluation questionnaire – short version Strategische Partner Strategic partners Firmenbegleiter Project liaison managers Begleitende Aquise-Materialien Complementary materials for the acquisition Broschüre Brochure Präsentation Presentation Flyer – Reason why Flyer – reason why persönliches Gespräch Personal interview Festes Seminarprogramm der Fixed programme of the training Lernstätten centres Seminarteilnahme Participation in the seminar Selbststudium Self-study Festes Selbstlernangebot der Fixed self-study programme of the Lernstätten training centres Positive Teilnahmeentscheidung Positive decision on participation Kleinstunternehmen mit 1-3 Micro enterprises with one to three Teilnehmern participants Unternehmen mit einer größeren Enterprises with a higher number of Anzahl von Mitarbeitern, komplexen employees, complex learning goals Lernaufgaben und einer geplanten, and a scheduled longer stay in the längeren Verweildauer in den training centres Lernstätten zu Phase 2 to phase 2 zu Phase 2 to phase 2 57 prof.dr.sc. dieter walter dr.sc. ingo klein German version Modell: Ablaufschema „Bencheffect“ Phase 2 und 3: Teamfindung Analyse der Ist-Situation Arbeitsphase 2 wird nur bei größeren Unternehmen und komplexeren Aufgaben notwendig werden. Ablauf für größere Unternehmen und komplexere Aufgaben Ablauf für kleine Unternehmen Bildung Change-ManagementTeam Motivation C-M-T 2. Auftaktmeeting Anwendung alternativer Analyse-Tools Firmencheck Check Standardprobleme Business Excellence Check SWOTAnalyse Objektive Funktionsanalyse 3. Feststellung der Problemlagen Festlegung der Lernstätten Verbindung zur Phase 4 58 prof.dr.sc. dieter walter dr.sc. ingo klein German-English version Modell: Ablaufschema „Bencheffect“ Model: flow chart "bench-effect" Phase 2 und 3: Phases 2 and 3: Teamfinding Analyse der team building as-is analysis Ist-Situation Arbeitsphase 2 wird nur bei größeren Working phase 2 is only applicable in Unternehmen und komplexeren case of larger companies and more Aufgaben notwendig werden. complex tasks. Ablauf für kleine Unternehmen Course of action for small enterprises Ablauf für größere Unternehmen und Course of action for larger enterprises komplexere Aufgaben and more complex tasks 2. 2 Bildung Change-Management-Team Building change management teams Motivation C-M-T Motivation CMT Auftaktmeeting Kick-off meeting 3. 3 Anwendung alternativer Analyse-Tools Application of alternative analysis tools Firmencheck Enterprise evaluation Check Standard-probleme Standard problem evaluation questionnaire Business Excellence check Business excellence evaluation questionnaire SWOT-Analyse SWOT analysis Objektive Funktionsanalyse Objective functional analysis Feststellung der Problemlagen Identifying problems Festlegung der Lernstätten Determining training centres Verbindung zu Phase 4 to phase 4 59 prof.dr.sc. dieter walter dr.sc. ingo klein German version Modell: Ablaufschema „Bencheffect“ Phase 4 und 5: Lernen/weiterführende Maßnahmeplanung Festes Seminarprogramm der Lernstätten Seminarteilnahme Entscheidung zur weiteren Teilnahme Selbst-studium Festes Selbstlernangebot der Lernstätten Training / Beratung Seminar Praktikum Coaching 4. Work Shop zur Reflexion der Lernphase Inspirationen festhalten Ergebnsiberichte Strategie durch C-M-T Maßnahmeplan 5. Unterstützung bei der Umsetzung Seminar Training Beratung Coaching Abschlußkonferenz 2007 60 prof.dr.sc. dieter walter dr.sc. ingo klein German-English version Modell: Ablaufschema „Bencheffect“ Model: flow chart "bench-effect" Phase 4 und 5 Lernen/weiterführende Phases 4 and 5: Maßnahmeplanung planning of training measures Entscheidung zur weiteren Teilnahme Decision upon a further participation Festes Seinarprogramm der Fixed programme of the training Lernstätten centres learning /further Seminarteilnahme Participation in the seminar Selbststudium Self-study Festes Selbstlernangebot der Fixed self-study programmes of the Lernstätten training centres 4. 4 Seminar Seminar Training / Beratung Training / consulting Praktikum Practical training Coaching Coaching Workshop zur Reflexion der Lernphase Workshop to reflect the learning stage Inspirationen festhalten Capturing inspirations Ergebnisberichte Reports on the results 5. 5 Strategie durch C-M-T Strategy by the CMT Maßnahmeplan Training activities plan Unterstützung bei der Umsetzung Support during the implementation Seminar Seminar Training Training Beratung Consulting Coaching Coaching Abschlusskonferenz 2007 Final conference 2007 61 prof.dr.sc. dieter walter dr.sc. ingo klein The involved parties came to the following results in the fist phase of the worksharing and cooperative implementation of the project: The phases described in the overview have proven to be essential elements; however, they could not be realised as independent phases that composed a set sequence. For example, the as-is analysis of the institution/company is in most cases an essential part of the acquisition phase. Another example is the learning phase, in which further analyses were often carried out, and activities aimed at transformation of the current practice were drafted. A detailed plan of the single steps, which is similar to the one developed during the project, can be useful as a result of brainstorming conducted by the entire network. In spite of its detailed structure, the plan should not prevent us from reacting flexibly to new problems (qualification needs, finding innovative solutions, problems in implementation). Depending on the specific objective of the project activities and profiles of the training centres, specific sequences must be developed and implemented, taking into account the above-mentioned elements of the bench-effect method. In particular, in-house project activities in enterprises combine business analysis, learning processes, brainstorming for necessary changes as well as consulting and coaching in the process of project implementation. Setting benchmarks proved to be a weak point, since the success of all subsequent phases depends upon its requirements, upon the reality of its achievement, and upon the possibility of successful business performance due to its realisation. The following factors turned out to be barriers to developing benchmarks: o Limited willingness to disclose positive experience under fear of competition o Scepticism about experience from other industries or other regions in terms of their applicability in ones own company or region. Hence, several conclusions described below should also be considered by future users while implementing their own innovations in case of working under comparable conditions. According to the different target groups and project activities, we developed specific sequence patterns described below that are regarded as inspiring examples to follow: 62 prof.dr.sc. dieter walter dr.sc. ingo klein Diagram 1: detailed flow chart depicting the implementation of the bench-effect method in East Brandenburg (left column: IHK FF/O, middle column: bbw FF/O, right column: DAA FF/O) German version 63 prof.dr.sc. dieter walter dr.sc. ingo klein Diagram 1: detailed flow chart of the realisation of the bench-effect method in East Brandenburg (left column: IHK FF/O, middle column: bbw FF/O, right column: DAA FF/O) German-English version Schrittmacher OderSpree Schrittmacher OderSpree bench-effect® Methode bench-marking bench-effect® method benchmarking Firmencheck Enterprise evaluation benchlearning benchlearning Phase 1 Phase 1 (Workshop, Beratung, Stammtisch) (workshop, consulting, regular meetings) Bedarfsanalyse Assessment of needs Individuelles Angebot Individual training programmes Training/Coaching Training/Coaching Bedarfsanalyse Assessment of needs Seminarangebot Seminars offered Training/Workshop Training/Workshop Lerngruppe Learning group Phase 2 Phase 2 (Workshop, Beratung, E-learning, Stammtisch) (Workshop, consulting, e-learning, regular meetings) Projektphase Project phase Begleitete Umsetzungsphase Guided implementation phase Erfahrungsaustausch mit anderen Exchange of experience with other KMU SME Lösungsansätze entwickeln Developing approaches to solve the problem(s) Fachgruppe Troubleshooting group bench-effect bench-effect Phase 3 Phase 3 (Unternehmensreise) (Business trips) Umsetzung des Gelernten im eigenen Implementation of the acquired Unternehmen knowledge in the companies of participating entrepreneurs Auswertungsworkshop Assessment workshop Aktionsgruppe Implementing group Firmencheck Enterprise evaluation 64 prof.dr.sc. dieter walter dr.sc. ingo klein Diagram 2: Detailed conceptual design of the project phases for the activities of bbw Frankfurt/Oder (middle column in diagram 1) German version 65 prof.dr.sc. dieter walter dr.sc. ingo klein Diagram 2: Detailed conceptual design of the project phases for the activities of bbw Frankfurt/Oder (middle column in diagram 1) German-English version Schrittmacher OderSpree bench-effect® Methode Schrittmacher OderSpree bench-effect® method Phase 1 Benchmarking Phase 1 Benchmarking Beratungs- und Analysephase Consulting and analysis phase Firmencheck Enterprise evaluation Bedarfsanalyse Assessment of needs Initiativgruppe Initiative group Phase 2 Benchlearning® Phase 2 Benchlearning® Trainingsphase Training phase Individuelles Angebot Individual programmes Training / Coaching Training / Coaching Seminar / Workshop Seminar / Workshop Lerngruppe Learning group Phase 3 bench-effect® Phase 3 bench-effect® Begleitete Umsetzungsphase Guided implementation phase Zielstellung und Aufgabenplanung Setting objectives, planning tasks Erfahrungsaustausch im Team Exchange of experience within a team Erfahrungsaustausch mit anderen KMU Exchange of experience with other SMEs Lösungsansätze im Team entwickeln Developing solutions in a team Gemeinsam Lösungsansätze entwickeln Developing solutions together Fachgruppe Troubleshooting group Umsetzung der Ziele und Aufgaben im eigenen Implementation of the objectives and tasks Unternehmen within the company Unternehensreise Business trip Auswertungsworkshop Assessment workshop Firmencheck Enterprise evaluation Aktionsgruppe Implementing group 66 prof.dr.sc. dieter walter dr.sc. ingo klein During the project implementation, easy flow models have helped to show participants a path through the project leading to a solution in a flexible but systematic and purposeful manner. These flow models worked well in spite of individual problems in the SMEs and various access barriers to participation. The primary objective was to find a way that facilitates a specialized and almost individual approach and - at the same time - allows mutual learning even in the most diverse groups. This objective had to be achieved while working with and for individual SMEs, on the one hand, and supplying standardized elements for problem solutions with the greatest possible generality, on the other hand. Accordingly, all training centres developed a range of education programmes that were designed for special target groups: groups, which were similar enough in one or more parameters, so that we could plan and guide their way to improvement in groups. The choice of the training centre approach itself shows that groups were formed according to the content-related criteria of business success. This approach was fine-tuned within the single training centres according to needs of the participants. Not all the attempts to develop problem-oriented programmes for groups proved to be successful. (In some cases, the presumed problems had not been clearly defined, and sometimes the advertisement of the programmes was not sufficient enough, etc.) Overall, this strategy proved to lead to the desired results. Training programmes were developed for target groups based on: ownership structure, enterprise size, branches of industry, common interests for the solution of location problems, common health problems, common targeted markets/countries for new businesses, common business problems 67 prof.dr.sc. dieter walter dr.sc. ingo klein The following sequence of the tasks and their transformation in the corresponding organisational forms proved to be practicable for the long-term project tasks: Initiative group: We clarified specific interests, defined problems, and planned possible solutions with participating individuals and decision makers from SMEs. This approach often defined the first contact during the acquisition of participants. Workshop proved to be a good organisational form for this initiative work. In some cases, more than one workshop was needed. Learning group: If a certain knowledge deficit was detected during the workshops, the first phase of the course of action planned was to try to solve the problem in a learning phase. This was basically available to all participants, not only to that of the initiative group. Hence, the composition of the learning group was seldom identical with the composition of the initiative group. The typical organisational forms of the learning phase were: classical seminar, training based on different methods, work shadowing and internships. Troubleshooting group: Troubleshooting groups are composed of representatives of SMEs and other individuals. The objective of such a group is to find solutions to problems that they had identified jointly. Troubleshooting group meetings are characterised by an intensive exchange of experience. Different forms of systematic benchmarking can be integrated optimally into the work. These troubleshooting groups are open for all participants of the project. The organisational form is usually one or more workshops. Implementing group: The objective of the implementing groups is to put the identified solutions into practice. In some cases, the group focused on exchange of experience and readjusting the developed solutions: if e.g. the solution had to be put into practice by an individual, or if an extra group was set up (within a company or organisation, etc.) to implement the solution there. The organisational forms were: workshops, training on the job, and work shadowing. Although we had developed a certain sequence of phases that are logically interrelated but clearly distinguished, it occurred rather seldom that participants followed the described order of phases. Groups worked parallel, in some cases, however, the cycle could not be completed. 68 prof.dr.sc. dieter walter dr.sc. ingo klein Hence, the theoretically ideal model displayed below, was applied rather rarely. Nevertheless, it served as an essential lead for those in charge, since it showed which elements of the bench-effect process had to be realised. Initiative group Learning group Troubleshooting group Implementing group A more flexible concept that allows the simultaneous application of different phases seems to be closer to reality. Initiative group Learning group Troubleshooting group Implementing group 69 prof.dr.sc. dieter walter dr.sc. ingo klein The required practical flexibility can best be reflected by a model consisting of different module types. The single elements of the modular system - or several elements put in a logical order - can be applied depending on the task, expectations and willingness of the participants to be engaged in intensive forms of the EQUAL programme. It may also be practical to select single elements (as it occurred in the practice, indeed). In this case, we started with the final element: the implementing group which detected a certain knowledge gap. This gap lead to the setting-up of a learning group. Modules Initiative group Learning group Troubleshooting group Implementing group We developed different programmes that had been custom-tailored to the situation and objectives of the companies. These programmes were used in inhouse seminars and concrete qualification, consulting and coaching projects. 70 prof.dr.sc. dieter walter dr.sc. ingo klein Example: In-house practice of the training centre "Strategy and Market" (TFH- Technical University of Applied Sciences Wildau, Bad Saarow branch): Stable business ties have been established. Result and tool: in-house seminars. Necessary requirement: enterprises really practice the "bench-effect principle". This principle represents the unity of deficit and opportunity analyses, further training, assistance in developing innovative transformation concepts, and their implementation. Example No. 1: Complex location for consulting services Six months intensive contacts until June, 2007. Companies with different offers based at the same location were pooled into a single project activity. Additionally, customers of the addressed enterprises also attended the seminars. Hence, the seminars helped to stabilise and expand existing customer relationships. The aim and result of the project was to develop practical ideas and measures for an improved design and marketing of the site. Example No 2: Medium-sized construction and service providing company 6 months intensive support including aim-targeted seminars; closing discussion on the achieved changes; a continuation is desired. The seminars served both the qualification of young professionals and "core employees" of the company and was specifically integrated into the company’s human resources development. Example No. 3: Travel and Tourism business Personal contacts, analysis of the needs of individuals and companies, company support and monitoring for three months. Tools and results: staff training, practicing the complex marketing concept developed by the management, followed by six seminars for employees on the implementation of the concept. There is a demand to continue this procedure according to the changing conditions and experiences. Among other improvements, some obvious positive changes have been observed in employees behaviour towards customers. Example No. 4: Enterprise with several ice cream parlours The company was under threat of insolvency (fact revealed by a management consultant), which could obviously be prevented only through fundamental changes in the company. The aim was to increase sales in order to improve liquidity in the short term. The main instrument was the information of employees about the problem, which increased their motivation. Twelve seminars for employees were conducted on specific business problems (service, conflict management, etc.) in a period of more than six months. One of the fist results was an increase in revenues by 17 to 30 per cent compared to 71 prof.dr.sc. dieter walter dr.sc. ingo klein the corresponding months of the previous year. This result improved the perspectives to save the 14 jobs at risk. Shorter activities including two-day seminars (supported by previous research) in form of workshops and brainstorming conferences were developed to address specific problems. They were followed by a guided self-study, the observation of changes in the management or the participants’ behaviour, including coaching up to specific changes. This was possible, because many seminar participants took advantage of the training programme several times and reported corresponding changes in their business activities. Approximately ten per cent of the programme participants attended more than five seminars. This indicates that many SMEs used the programme systematically, and fitted the seminars into their human resources development plans. Based on the company size of the participating SMEs, we can assume that the training of employees at such a high level would not have been feasible without this training centre project. Conclusion: The project sequence proposed at the beginning of the project was the following: It began with acquisition and as-is analysis and setting-up benchmarks based on this analyses, followed by a learning phase, problem solving and brainstorming in troubleshooting groups, and ended with the implementation of the solutions found by the coached implementing groups in the company. This idea has proved itself in principle. It corresponds to the bencheffect methodology. However, during the realisation of the project, major adaptations to the specific conditions and improvements were carried out successfully. These were the following: o The interdependence and thus, simultaneity of different phases such as: acquisition, as-is analysis, qualification, the work of troubleshooting groups, efforts to find solutions to problems and subsequent action which aimed to achieve practical improvements, increased during the project. o The seminar programmes were qualified and are being increasingly applied as a modular system according to the analysis results and the change needs of the clientele. 72 prof.dr.sc. dieter walter dr.sc. ingo klein o Necessary specific contents, processes and methods were developed and implemented within the respective fields of learning to initiate the measures required to qualitatively improve applicability, skills, abilities of the employees as well as their health. These measures, however, were not aimed at complex changes in the company’s management. Different elements as repeated several times. These elements are: training, self-study, implementation tasks, workshops aiming to review results and generate new ideas. These activities represent the basic requirements for continuous individual and team learning. and enable the implementation of independent, strategic and operational controlling, even after the completion of the project - in terms of sustainability and upon the principle of "helping others to help themselves", which was consistently pursued during the project. The unity of analysis, learning, exchange of experience, and implementation applies to in-house seminars in particular. Thus, the phases of the bench-effect method are realized here in different time frames, with different budgets, and without a scheduled sequence. The quality of seminars improves even in case of one-day or two-day seminars, if the bench-effect principle is applied deliberately. Problem identification and benchmarks setting take place at the beginning of the seminar. These initial activities are followed by experience exchange and brainstorming. By the end of the seminars, participants jointly come to conclusions regarding practical work in companies, personal activities and behaviour (e.g. applications of unemployed). If required, participants are subsequently offered follow-up measures such as individual consulting or coaching; they can also get support for the implementation. 73 prof.dr.sc. dieter walter dr.sc. ingo klein 4.4 Networks as the objective of the method SMEs in East Brandenburg often work in isolation. They know the local market: their consumers (customers), their suppliers (if they are engaged in a manufacturing process), as well as their competitors. However, their level of knowledge and economic capacity (size) is not sufficient for regional activities, leave alone international transactions. It is not a very common approach to overcome these limitations by cooperation: SMEs in East Brandenburg seldom participate in work-sharing networks. This situation is the reason for the fact that SMEs in East Brandenburg obtain far too few suggestions for deliberate and systematic comparison with others. The situation described might also promote the modesty observed. Hence, projects based on the bench-effect method aimed to promote networking among the participating SMEs. We have succeeded with it on several levels, however, the structure of these information and support networks is always loose, and their level of institutionalisation remains rather low or is completely absent: between long-term education centres projects or and on participants more than who one participated project in (indirect institutionalization with the training centre occurs during the project in case the co-ordination capacity is appropriate,) between the single education centres (There is a degree of institutionalization and formalization. Due to the project co-ordination, there is even an organisational centre for the time of the project implementation) between unemployed (young adults and people over 50) and entrepreneurs entrepreneurs’ meetings which aim at networking location-based networks (e.g. "Haus der Beratung" Schloss Diedersdorf House of Advise) setting-up of regional collaboration networks with the aim to place all-inone offers in the market. first experience of simultaneous involvement of companies and their customers in an EQUAL project. (That promotes customer-oriented or demand-oriented improvement in the corporate policy, and a customer-oriented behaviour of employees in a "supplier enterprise".) Some of the resulting networks will last even beyond the duration of the EQUAL II project. SMEs that build collaboration networks are going to be forced to conduct intensive networking because of the technology they apply. 74 prof.dr.sc. dieter walter dr.sc. ingo klein However, all experience indicates that the continued existence of the network is at risk if no (preferably) neutral organizational and co-ordination capacity is available. A certain level of institutionalization of the network activities – in which form ever – should be formulated as the next objective to aim for. This applies also and especially to those institutions which assume the role of the organiser. The very fact that IHK, HWK, DAA, and bbw Wildau jointly participated in the development and application of the demand-oriented and practice-oriented bench-effect method is regarded as a significant success. Regardless of the continuing competition in the training market, and partial overlaps in the range of education programmes and in the target clientele, a genuine development partnership has been created for the benefit of the participants: The offer of the overall project led to mutual marketing support. Contrary to the tendencies of a predatory pricing, the ever-increasing knowledge of the potentials and specific strengths of the partner reinforced co-operation and the division of labour. Thereby, we achieved an important but still expandable progress in the exchange of customers and tutors as well as in the adjustment and co-ordination of the range of our education programmes. Training centres sometimes compete with each other in the use of bench-effect method. Thus, it is important for a trustful and sustained co-operation to recognize and take into account the objectively and subjectively reasonable limits of the networking of training centres in the interests of co-operation efficiency and the quality of the applied measures: The need to develop long-lasting and trustful relationships between participants of the training programmes and the training centres presupposes that a particularly close bond should emerge between the companies and individuals to one education centre. The complexity of the problems of many target persons and companies indicates that they cannot really benefit from the competence of several training centres. What they really need is support from one source. The participating institutions have to perform specific social tasks, for example through their memberships in the IHK or in the HWK or through the long-term co-operation of the DAA and the bbw, or through the research tasks of the TFH. It is obvious that each education centre wants to secure its own sustainable existence. 75 prof.dr.sc. dieter walter dr.sc. ingo klein These, too, were strong reasons for a modification of the original concept that aimed to offer "neutral" support to the participants based on the co-operation of training centres: o The trend toward in-house seminars requires both at the same time: target-oriented holistic approaches of the bench-effect and the support of an "institution of trust". o Long-lasting trustful relationships are a prerequisite to successful bench-effects. Project managers in training centres tend to have that confidence and specific knowledge about the companies. o Tutors that have worked with the education centres for a long time proved to be good project liaison managers. o Specific objectives of the measures within the project require specially qualified trainers, consultants and coaches. Accordingly, projects on entering new markets in foreign countries (e.g. the trips of the entrepreneurs to Spain, Finland, Poland organised by the Chamber of Commerce) require a liaison manager who knows these markets, the applicable law as well as the manners and customs of the respective countries. o The motivation of training centres is stimulated by their interest to increase customer loyalty and to ensure a solid funding also beyond the official end of the project. Hence, project participants can be sure that they can expect consulting and coaching even on the long run. 76 prof.dr.sc. dieter walter dr.sc. ingo klein 5 Conclusions and recommendations 5.1 bench-effect – more necessary than ever The SMEs in East Brandenburg are small and micro enterprises. Even those enterprises that have successfully established themselves in the market, suffer from limited resources. Normally, they do not review their economic activities strategically, and lack planned procedures for continuous improvement. In many cases, the company management do not know how to bring about improvement processes and they even lack the awareness that these processes are essential. External advice is far too often seen as financially unviable or it is rejected on principle as an alleged sign of ones failure. The described situation has not changed sufficiently since we started our work within the bench-effect project. A few hundred entrepreneurs and individuals who wanted to improve their chances on the labour market through training have changed their attitude in the course of the project. They represent the potential of employed people who are ready for changes and committed to work for improvement in a goal-oriented manner. We hope that their success will have a positive effect on thousands of people that still have their concerns about the project. Up to now, many East Brandenburg SMEs will not realise the necessity of continuous improvement before poor profit figures forecast the failure of the company. If these SMEs are to be saved for economic reasons, and they have to, and if the region does not want to lag behind the economic development in Germany, then they have to be offered external support. The optimal goal should be to create conditions that help companies to generate an interest in external support. As the project implementation that lasted for two years in East Brandenburg has clearly shown, the bench-effect method is suitable, to be applied precisely to the above mentioned problems and to help to achieve that SMEs look beyond their daily tasks and start to plan their future strategically, people begin to follow standards that represent best practice, companies seek external consulting to analyse specific problems and barriers to development, SMEs engage in developing long-term learning pathways and business plans with the support of external consultants, or as a result of the organized exchange of experience, 77 prof.dr.sc. dieter walter dr.sc. ingo klein a demand for learning and training programmes is generated since the reasonability of these training measures is not being questioned any more due to the close contact and trust developed between training centres and the enterprises, the implementation of improvement processes is discussed in internal groups within the SMEs or in heterogeneous groups composed of several SMEs, the awareness increases that networking and co-operations can help to better secure the economic future of enterprises. Multiple signals confirm a sustained effect to the participants (companies and individuals). These are the following: Determined improvements in company’s situation: increasing sales, efficiency gains as well as improving employee motivation, Verifiable improvement of the job seekers chances on the labour market and the increase of the employees capacity, Enquiries about further and subsequent measures at training centres. 5.2 Flexibility – methods, timescale, topics, participants The training programmes should be designed with the utmost flexibility in order to cover different aspects. These are among others: the diversity of reality, the choice of methods, the optimal training time as well as the issues of practical importance like the actual time that participants spend with programme activities compared to their regular work time, the learning contents as well as the number of participants. Under the heading "flexibility" we shall record the following facts and general experience which have proved useful: Methods Analysis - Unstructured interview, - Structured interview, - Group inquiries (interview or written), - Enterprise evaluation (EQUAL II, von-Gut-zu-SpitzeUnternehmenscheck - "from-good-to-top enterprise evaluation"), - SWOT analysis, - Standard problems analysis, - Business excellence evaluation and quality management, - Objective functional analysis (evaluation of economic indicators) 78 prof.dr.sc. dieter walter dr.sc. ingo klein Consulting - One-on-one interviews - Group discussions in a company, - Establishing long-term initiative groups working within one company or with employees from several companies Learning - Seminars, - Self-study, - Internships, - Establishing long-term learning groups working within a company or with employees from several companies Training - Workshops focusing on practical processes, - Training on the job, - Establishing troubleshooting groups that work within the longterm programmes in a company or with employees of several companies who benefit from each other by sharing experience Coaching - Coaching of individuals - Coaching of small groups Process support in change management - By coaching - By a series of workshops - Establishing implementing groups that work in the long-term within a company or with employees of several companies who work in the field of change management Time Schedule exploratory discussion 1 hour presentation at a road show 2 hours consulting individuals or small groups up to 4 hours seminar/training in groups 4 hours and more mostly 1 to 2 days in-house programmes total time: up to 6 months, actual training time: up to 12 days topic-oriented programmes (e.g. developing foreign markets, health) total time: up to 1 year, actual training time: up to 20 days 79 prof.dr.sc. dieter walter dr.sc. ingo klein Topics The programme used an extraordinary diversity of subject matters. All education centres have tried and explored the needs of potential participants and have developed corresponding offers. The five participating learning centres agreed to cooperatively divide the work, and defined their own learning fields. Virtually all of the respective thematic emphases were put into practice. (See section 1.5 Learning fields, pages 11 to 13.) Participants - Owners and managers of SMEs - Individual participants who aim to start a business or pursue selfemployed occupation - Employees of SMEs as individual participants or in groups - Individual participants who are jobseekers and are preparing for a new employment 5.3 Working with learning paths and action plans The objective of the theoretical model for the bench-effect method was to negotiate with enterprises that have declared their interest in participating in EQUAL II, to conclude an agreement on an approach that starts with the problem analysis and ends with the solution of the problem. One of the essential tools for the implementation of the approach agreed upon was a set of specific plans. The exact content of these plans were to be derived from interviews conducted with the decision makers of SMEs during the analysis phase. Plans that were based on the process of learning were denoted with the term "learning path". We used different terms in those cases where the task was to find ways to change the practical economic activities within the participating SMEs. The terms used in the course of the project, were: business plan, change plan and action plan. It has been observed that the willingness of potential participants for long-term co-operation was initially rather limited. The reason given for this reluctance was often related to the presumption that the companies did not have enough time for it. However, it has appeared in the course of project implementation, that the participation in long-term programmes depended on the degree of trust participants had in the organisers. 80 prof.dr.sc. dieter walter dr.sc. ingo klein We have found out that companies that already had contacts with the respective training centre, or had participated in projects within previous programmes were more likely to agree to long-term learning paths or action programmes than newly acquired companies and their employees. This is also a recognition of the quality of the training measures that had been offered and implemented. Ultimately, the idea of the possible individual customer orientation (as it is defined in the bench-effect method) was established in practice. The seminar and training programmes of the development partnership were based on an accurate knowledge of the needs of potential participants and on the expectations expressed by them. Hence, it was possible to pool individual problems and to work on them in groups. If the total time scale of the programmes was relatively long, the development partnership invested considerable effort to acquire those companies and their employees that fit the content of the programme best. This applied for example, to programmes that aimed to prepare companies for co-operation and new markets, or to programmes on a health promoting working environment, etc.. After a thorough analysis of the market, we developed a programme framework. Subsequently, we identified and addressed companies whose individual problems matched the programme framework. In the course of project implementation, the programme framework was adapted more precisely to the needs of the participants. This approach proved successful. In-house activities constituted the third way that confirmed that longterm learning pathways and action plans are successful tools. After the initial contact to and the subsequent analysis of a particular enterprise, it was detected that this company needed a long-term support. Individual learning paths and action programmes were developed for this particular company and we worked with its employees for a longer period of time. 81 prof.dr.sc. dieter walter dr.sc. ingo klein 5.4 Composition of groups: heterogeneous vs. homogenous The composition of the groups during the project implementation has always been crucial for the success of the single measures. The following criteria seem to be appropriate: • the previous business knowledge of the interested parties (professional qualification, work experience), • the branch of industry or division of the participants (in tourism-related activities: hotels and hostels, event service providers such as boat rentals, swimming pools, golf and miniature golf courses), craftsman and SMEs that offer material goods (construction, bakers and butchers, etc.) • type of performance: services or material goods. Contrary to the trends of the German economic structure, numerous further training programmes still focus on crafts that produce material goods and neglect the growing importance of services outside of the insurance and banking sector. The service sector is often conceptually underrepresented in the scope of training programmes. We observed that three interdependent factors were critical to the success of the measures. These are: Personal attributes: especially factors, such as attitude to training activities, knowledge, ability and willingness to work in a team Personal interest: could be based on the participant's personal interest in education, from his/her professional plans, or on peer effects. Economic pressure: Based on the economic indicators, this motivation level could be identified to only a limited extent. Only the combination of the expectations of the affected participants and the general character of these expectations revealed the basic structure of a differentiated pressure. This psycho-social conditions of the targeted group work proved to be important for the success of the project compared to other group forming indicators, such as branch of industry or business size. 82 prof.dr.sc. dieter walter dr.sc. ingo klein personal attributes optimal group composition economic pressure personal interests The more homogeneous a group was according to this psycho-social criteria, the more satisfied were the participants with the results in general. The group’s work was at risk if the differences were large. Under certain circumstances, the planned approach could not, or could not completely be implemented in the intended way. It was sometimes extremely useful, if a group that was relatively homogenous regarding these psycho-social factors was rather heterogeneous concerning other factors. Even joint workshops for entrepreneurs, unemployed young adults and jobseekers aged 50 or more led to surprisingly positive results. Many participants found out about the specific motivations and interests of the participating groups for the first time, and they learnt to understand and accept each other’s interests. Due to this special group composition, some participants were offered internships and some jobseekers found employment. Concerning learning groups and troubleshooting groups, a group composition based on the current problems and responsibilities of the participants proved to be beneficial. Concerning learning groups and troubleshooting groups, it proved to be beneficial if the group composition was based on the current problems and responsibilities of the participants. 83 prof.dr.sc. dieter walter dr.sc. ingo klein The following composition of groups based on thematic foci, and the training programmes design derived from it, proved to be appropriate in this context: A. Managing Director and senior executives of existing SMEs in different current business situations and the resulting priority objectives: Problem No. 1: The primary objective is to increase sales and revenue in companies with the following characteristics: the capacity utilisation is not satisfactory, the capacity cannot be reduced in the medium term or it cannot be reduced at all, and the resulting fixed costs are not affordable. Problem No. 2: The primary objective is to reduce costs due to the relatively steady demand situation with a flexible capacity of assets. Problem No. 3: The primary objective is the diversification of services provided, since the existing capacity is not fully utilised either generally or seasonally and since the demand in the core area of the current range of services is not at all or only slightly expandable. B. New entrepreneurs Problem No. 1: The primary objective is to examine the likely economic viability of the business idea and the personal strengths and weaknesses of the new entrepreneur with regard to the implementation of the business idea. Problem No. 2: The primary objective is to develop a business plan with external and internal orientation of its informative content and its presentation and implementation. Problem No. 3: The primary objective is to support the first steps of a business, tailored to the specific week points of the respective entrepreneur with regard to marketing, supplier relations, financing and cash plan, accounting and income statements etc. 84 prof.dr.sc. dieter walter dr.sc. ingo klein C. Family members, employees, employees of SMEs who conduct defined activities as employees, but who should be trained to substitute senior staff on a temporarily. Problem No. 1: The primary objective is to impart basic knowledge on the specific tasks that the participants will have to perform in their companies. Problem No. 2: The primary goal is to exchange experience on the same or similar tasks and problems in different companies. 5.5 Recommendations on the organization of the bench-effect method The success of each idea and each project depends crucially on how strong and reliable the organisation of their practical implementation is. The bench-effect method is a very comprehensive and methodologically diverse approach to support SMEs. The method requires a significant organizational work with regard to both the quantitative and the qualitative aspect. In order to meet these organizational demands, five educational institutions that specialised on certain educational fields agreed to collaborate. This co-operation proved very useful. The task to coordinate the overall processes was taken over by the sixth project partner. Due to this fact, the organisational form of the project received a specialised and well designed structure. The role of the project liaison manager: During the design of bench-effect method, the development partnership assumed that if companies and individuals participate in a single project for a longer time, they will need a permanent contact person at the organisers’ side. This person should act as an interface between the single training centres. These employees are called "project liaison managers". It is their task to liaise between the training centres and the companies even if the companies need to go to another centre to acquire specific education or consulting. 85 prof.dr.sc. dieter walter dr.sc. ingo klein The project liaison manager was to perform several tasks: The liaison manager should support the acquisition of participants. The liaison managers of single training centres should be introduced at acquisition events (in person or by image and CV). The project liaison manager conducts the initial interviews with interested companies. He/she carries out the company assessment or analyses the evaluation questionnaires that were previously filled in by a participant. He/she prepares recommendations for the training centre on the practical approach which can suit the needs of the interested company after the initial meeting. (The learning path recommended by the liaison manager is adjusted to the educational focus and the financial means of the respective education centre.) The project liaison manager negotiates with the interested companies about the company’s further involvement in the project (learning path). He/she remains the contact person of the acquired company, even if the company (during the execution of the recommended learning path) conducts activities in a training centre that is not the employer of respective project liaison manager. The liaison manager remains the contact person of the acquired company as long as it is engaged in the project. It is the liaison manager’s task to actively help the enterprise to achieve the agreed project objectives. The project liaison manager prepares a minute of all meetings and calls with the company, and hands them out to both the company and the respective training centre. At the end of his/her assignment, the liaison manager reviews the results of the company with the company’s representatives and records them in an appropriate way. (minutes, and if required, a new enterprise evaluation or a final work-shop) The project liaison manager evaluates his/her own activities with the company and makes his/her findings available for the generalization in the bench-effect method. In practical implementation of the project, the liaison manager did not get such an extensive function as planned. The idea that many companies will use the services of the EQUAL programme, to work a long time on many different issues, with external support, in several training centres, proved to be too optimistic. Those companies that were interested in complex projects with a long-lasting engagement have put their trust in the employees of the training centres. These employees have almost assumed the function of the project liaison manager. However, an activity across different training centres remained a rare exception. 86 prof.dr.sc. dieter walter dr.sc. ingo klein Prerequisites of the work of the supervisors of the project: If the bench-effect method is to be applied in the future, it is useful to create a set of operating conditions before the project starts. It could lead to significant delays or even discredit the content of the project if these preconditions are not met at the beginning of the project. Relevant experience of the project supervisors: An external consulting for SMEs requires that the representatives of the project organiser are credible in this function. The should meet comprehensive preconditions in terms of: Business management know-how, Personal management experience, Teaching skills, The capability to inspire confidence. It is true, that all participating parties can learn and have indeed learnt a lot in all respects during the project. However, there is usually only one opportunity to address a potential participant about the project. The success of any project depends on the substantive components of the project idea, and on the credibility of those people that promote the participation in the project in particular. A database of potential participants: We suggest all development partners to use a common address file (enterprises, and individuals) during the preparation and implementation of the acquisition phase. We did not determine any geographic or sectoral restrictions or limitations neither for the single training centres nor for the acquisition efforts. Hence, we needed an intelligent database in order to avoid that companies are addressed more that one time. The purpose of the programme could have been damaged if the complexity of the programme was contradicted by the fact of a repeated approach of potential participants. Established instructors and consultants: In the implementation of single projects all training centres had to work with external instructors and consultants. The project’s success depends to a considerable extent on the people who establish the first contact to the participating enterprises. The same applies to the instructors and consultants acting on behalf of project organisers. Usually, their skills can not be tested before the project starts. Hence, appointing new instructors and consultants is always a risk. 87 prof.dr.sc. dieter walter dr.sc. ingo klein That is why we recommend to future project organisers to include project partners who have relevant experience in this field. They also have to make sure that these partners have enough seasoned instructors and consultants who can be deployed by the whole partnership during the entire project. About the funding of the bench-effect method: The ESF EQUAL programme provides a unique advantage for the beneficiaries: the costs of the participants are fully covered by the programme. In spite of this fact, the participation implies a considerable burden. The entrepreneurs, their employees or other participants spend time on the programme and they are not available for their usual duties during this time. This time can be considered on the short-run as a loss of profit opportunity, even if long-term profit opportunities are improved due to participation in the programme. In practice, this lost opportunity is credited to the participant as a virtual contribution to the financing of the programme. This contribution is essential also for the project organisers. It is subject to reporting and is also important for the financial management, since it provides information on how many participants attend the project and for how long they do so. The total project spending is subject to compliance with the pre-approved relation to the financial resources of the participants. This funding model leads to the intended broad effect of the ESF programme to offset adverse effects of development. The only factor that limits the involvement of potential participants in the programme is time. Fortunately, that means that this support programme really reaches disadvantaged participants. However, it also leads to a situation in which enterprises and individuals who do not have any available factors other than time are more likely to participate in the project. Due to this riskless benefit, quite a number of participants make their decisions with levity and thus, endanger the stability and internal engagement in the activities. Hence, we suggest reducing the available support by requiring a financial contribution of the participants in order to ensure the high quality of the activities. 88 prof.dr.sc. dieter walter dr.sc. ingo klein 5.6 Conclusion in form of seven questions Question No. 1: Has the method proved successful? The above-defined principle and the components of the bench-effect method have proved successful without a doubt. They comprise the analysis of the current situation, the comparison of industrial sectors and regions, brainstorming workshops, the identification of benchmarks, and the derived learning processes and change processes. The realisation of these components intended to be an integrative process that can be repeated if necessary. However, a rigid and chronological order of the modules in form of subsequent phases proved to be unrealistic and ineffective. Question No. 2: Has the combination of acquisition and enterprise evaluation proved successful? In principle, the combination of acquisition and first SWOT analysis is essential for both steps: attracting the interest of potential participants and ensuring an optimal design for the measures. The initially proposed complex enterprise evaluation (see Appendix 1.2) had to be reviewed, despite its positive effects to generate interest. The enterprise evaluation was partially replaced by more specific tools, since: o They were too complex and unspecific to enable valid estimates. o They were too comprehensive to motivate clients to a serious involvement before the beginning of the project. o They had sometimes led to improper or incorrect, and thus, demotivating conclusions about the condition and the management of the respondents. Question No. 3: Has the designed sequence of phases "acquisition and evaluation of the current situation - objectives - qualification - search for solutions in so-called troubleshooting groups - change management in so-called implementing groups proved successful? The designed phases have fully proved to be indispensable modules of the project implementation. However, their realisation as successive phases, proved to be appropriate only in exceptional cases. It is important that the participating training centres know the necessary components of the bench-effect method and their methodically correct sequence. They are less interesting for the benefiting companies and individuals. For them, it is the effect that is essential. 89 prof.dr.sc. dieter walter dr.sc. ingo klein Question No. 4: Has the quality of the network of the participating training centres improved in a desired way? The joint development and general acceptance of the method led to better understanding and better co-ordination between the participating institutes. Through the joint project implementation, the centres learnt more about each other’s potentials and limits. This partially enabled the qualified division of labour, as well as the exchange of trainers and participants. Whether the networks will be sustainable and whether, as sought for by most participants, their collaboration will be further intensified, depends in our opinion on the following factors: o Will it be in the interest of the training centres- primarily because of mutual synergies - to represent not only themselves but also the joint projects according to methodological basic idea of the bench-effect method? o Are common programmes of several training centres and institutions going to become more important in the future? o The current network emerged because regulations on spending of aid funding required it. Have enough connecting elements been generated to keep networking profitable for single providers? o Can the performance of each partner be clearly formulated and described in future projects too? Question No. 5: Did we manage to achieve improvements in the co-operation and exchange of experience among the participants of the single measures? The method enforced an objectively more intensive experience exchange. Discussions aimed to find ideas for specific changes. In-house seminars with the participation of clients and co-operation partners of the directly affected enterprises have lead to an intensified exchange of experience as well as to a significant improvement of the co-operation of providers of complex services and an enhanced "customer care". Question No. 6: Has the set of tools for educational measures and change management been significantly expanded? The applied tools of the single training centres were available for other training centres within the development partnership. An important lesson is: tools and methods that come "from outside" (e. g. through methodological support) are used only to a very limited extend, even if they had often been applied successfully in further education. The contents and tools used in the training programmes should correspond to the objectives and problems of each specific measure as well as to the experience of the instructors and consultants, and tailored for the participating enterprises and individuals. 90 prof.dr.sc. dieter walter dr.sc. ingo klein Question No. 7: Are there any expectations about the sustainability of the success achieved and the application of the method legitimate? We believe that the above-mentioned "philosophy" of the method is going to have a sustainable impact on the practical work of the participating institutions, since it has proved useful and successful. According to our expectations, the improvements in the division of labour and co-operation between the participating institutions will be sustainable and are going to improve the quality of offers in the long run, since the mutual knowledge of the potentials of the institutions increased. However, there will always be a certain conflict between the competition and the interest in co-operation. 91 prof.dr.sc. dieter walter dr.sc. ingo klein 6 Appendix Appendix 1: Enterprise Evaluation Questionnaire - Version 2 COMPANY PROFILE How long has your company been in business? 1 year or less 1 to 3 years 3 to 5 years 5 to 10 years more than 10 years What sector of industry does your enterprise operate in? manufacturing crafts trade service How many people do you employ? none 5 or less 5 to 19 20 to 49 50 or more Where do you distribute your products and services? locally regionally in Germany in Europe worldwide 92 prof.dr.sc. dieter walter dr.sc. ingo klein Customers and markets 1. Do you conduct market research? a) No, our own experience in purchasing and sales suffice. It is essential to know your market. Making your own experience is indispensable, indeed. Solely own experience is always limited in more than one respect. Obviously, you would like to know not only your current customers but also the potential ones. That is why we strongly recommend you to learn more about your market by using new sources of information. There are numerous tools available to increase your business intelligence. Many of them are inexpensive in fact. Anyway, we suggest that you first specify what kind of information you need for what purpose. b) On special occasions, we collect data in the market situation by means of a customer survey. It is essential to know your market. You are not satisfied with sporadically obtained information, but actively conduct market research on certain occasions. However, it would be even better if you do it on a regular basis in order to remain up-to-date. There are numerous tools available for market research, which you could use depending on your budget. Anyway, we suggest that you should first specify what kind of information you need and for what purpose. c) We use market research tools on a regular basis (visit trade fairs, evaluate information found in magazines, and the like) It is essential to know your market. You have recognised the important role of systematic market research. Systematic market research gives you a competitive edge and an advantage in knowledge compared to your competitors. You could probably consider whether your market research you conduct is systematic enough. If your company has reached a certain size, it might be useful to entrust an expert with this job or even set up a separate market research department. d) We conduct systematic market research using relevant tools. It is essential to know your market. You are among the few enterprises that conduct market research extensively. You have a competitive edge and an advantage in knowledge compared to your competitors. 2. How do you conduct marketing? a) We do not need special marketing. Marketing is not a luxury. It is essential for every enterprise. Marketing implies more than advertising. It comprises all methods and tools that you need to be active in the market. You should carefully consider and plan all your steps in this regard. As a result, your will develop a marketing concept based on specific measures which should be implemented and monitored consequently, indeed. b) We advertise every now and then. Advertising is an important part of marketing. However, it must be planned carefully. Without a marketing plan, advertising is merely a matter of luck. A marketing plan should be a part of an overall marketing concept. A marketing concept comprises all methods and tools that you need to be active in the market. Such a concept also defines how to implement single steps and monitor their success. c) We organise our marketing activities according to a marketing plan. Not limiting your marketing activities to single measures is a good approach. You could integrate your marketing plan into an overall concept. A marketing concept comprises all methods and tools that you need to be active in the market. Such a concept also defines how to implement single steps and monitor their success. 93 prof.dr.sc. dieter walter dr.sc. ingo klein d) We have a detailed marketing concept. It includes a plan for each measure and defines ways to implement it successfully and monitor it regularly. Well done. Such a marketing concept is a precondition of using all chances for effective marketing. Nothing will get in the way of your success if you manage to implement your concept and plans consequently. 3. How do you compare your products and services with those of your competitors? a) We receive reports from our customers occasionally. Comparing is a smart thing to do. Occasional reports, however, would definitely not do the trick. Being content with this situation is just as dangerous as flying blind. This is why we suggest that you should pay more attention to your competitors. Thus, e.g. you should actively collect information about your competitors’ products (brochures, advertising material, trade fairs and online enquiries). b) We search the Internet for relevant information. Comparing is a smart thing to do. You have taken the first step towards active information procurement. The Internet is indeed an abundant information source and it can be used easily. You should, however not limit your efforts to the Internet. Trade fairs and exhibitions offer a more specific and up-to-date information about the products of your competitors. Moreover, you can gather additional information during conversations. c) We search the Internet for relevant information and visit trade fairs and exhibitions. Comparing is a smart thing to do. You are using several tools to compare products. You gain a lot of information on the products of your competitors by going to trade fairs and searching the Internet. To use the acquired results to the full extent, you should process the information appropriately and integrate it into your marketing concept. It is also advisable to check regularly whether your information is up-to-date. d) We use all available product-comparing tools and document our results in writing. Comparing is a smart thing to do. Carefully observing your competitors will give you a substantial knowledge edge. 4. How do you find out what your customers expect from your products / services? a) We get some indications from our customers occasionally. Occasional information provided by customers can serve at least as a rough guide. However, it is seldom representative. You can increase the quality and quantity of feedback if you approach your customers proactively. Customer survey is a proven method used to generate feedback. The information gathered should be captured in an appropriate way and evaluated in co-operation with all of the relevant employees (sales, marketing and development department). b) We capture customer remarks and requests. It is nice that the feedback of your customers is not inconsequential. Capturing it is a good idea, indeed. You can increase the quality and quantity of the information if you approach your customers proactively. Customer survey is a proven method used to generate feedback. The communication and co-ordination between different departments (service, sales, marketing and development) play an important role during the evaluation of the data and the determination of consequences. 94 prof.dr.sc. dieter walter dr.sc. ingo klein c) We carry out customer survey regularly and evaluate the captured information. Regular customer surveys increase the chances that your products and services satisfy the expectations of your customers. Communication and co-ordination between different departments (service, sales, marketing and development) play a crucial role during the evaluation of the data. You may probably wish to see whether you can involve your customers in the development of your products and services. This could increase satisfaction and loyalty of your customers. d) We actively involve our customers in the development of our products / services. Involving your customers into the design of your products/services is an optimal solution. It can help you to achieve a particularly high level of customer satisfaction and loyalty which will give you a competitive edge your competitors can hardly catch up with. 5. Which strategy do you pursue during your conversations in the B2B business? a) We do not need any strategy. Having a strategy is essential for professional business sales talks. The strategy does not only serve you as a guideline it also helps you to evaluate the situation within the conversation. The strategy is also useful to take a common line within your company. We strongly recommend dealing with this issue. b) We try to find out what the best sales arguments are. Collecting your best arguments is essential if you wan to be successful in sales. However, you should plan your strategy more systematically. In the B2B business, it is particularly important to evaluate your offer from the customer’s perspective. For this purpose, you should identify the decision criteria of your customers and learn as much about their value adding processes as possible. The more you know the better you will manage to display the value-adding contribution of your products. c) We try to follow the customer’s logic and see our products from their perspective. To be able to evaluate your offer from the customer’s perspective is particularly important in the B2B business. It is essential to learn the decision criteria of your customers and analyse the customer’s value-adding processes. The more you know the better you will manage to display the value-adding contribution of your products. d) We analyse the value-adding processes of our customers and adjust our offers accordingly. You are indeed up-to-date if you pursue this value-oriented sales strategy. The more you know the better you will manage to display the value-adding contribution of your products. You increase your chances during sales conversations considerably, if you are not regarded as a salesperson, but considered as a value-adding partner. 6. What tools do you use to draw your customers’ attention to your products / services? a) We do not have to use any tools because our customers know us well. It looks like you have been dealt a bad hand of cards in the game of attracting attention. If you want to attract new customers, you have to make sure that they take notice of you. You can choose from a broad range of solutions depending upon your needs and budget. Having corporate website and maintaining it regularly is considered a standard nowadays. Basically, it is advisable to embed all activities into a marketing plan. In addition, you should first consider what target group your products / services are appealing to. 95 prof.dr.sc. dieter walter dr.sc. ingo klein b) We provide corporate and product information upon request. Maintaining your company’s presence in the market is essential in the struggle for attention. You should do more to make sure that your corporate and product information reaches your target group. You can choose from a broad range of solutions. Having corporate website and maintaining it regularly is considered a standard nowadays. Basically, it is advisable to embed all activities into a marketing plan. In addition, you should first consider what target group your products / services are appealing to. c) We provide corporate and product information and have a website. You do not wait until your customers find you by chance. Your website has become an indispensable tool for drawing attention to your products / services. It is of vital importance that you maintain and regularly update you website. However, a website cannot substitute your presence in the market and participation in trade fairs and exhibitions. In addition, if your company has reached a certain size, you should systematically create a positive public perception of your company within the region of your target groups. d) We provide corporate and product information, have a website and we do public relation and press work systematically. The combination of product information, advertising and PR ensure that you gain an advantageous position in the struggle for attention. These three elements complement and reinforce each other. For this purpose, these tools and activities should be better coordinated within the framework of the marketing plan. Co-operation 7. How important is co-operation for your company? a) We do not need any partners. You are missing out the advantages of co-operation. A mere occasional exchange of experience can provide you with information and help to establish contacts. You can benefit from the experience and knowledge gained by other companies. As for a joint venture or joint offer, these forms of co-operation virtually bring advantages that are even more objective. Finally, the highest level in the development of co-operation could be the establishment of a common subsidiary aimed at the realisation of mutual projects. Anyway, we highly recommend that you actively and selectively search for partners and opportunities in order to benefit from the advantages of co-operation. b) We are not yet involved in partnerships but we would be interested to join one. It is absolutely positive that you are open to co-operation. A mere occasional exchange of experience can provide you with information and help to establish contacts. You can benefit from the experience and knowledge gained by other companies. As for a joint venture or joint offer, these forms of co-operation virtually bring advantages that are even more objective. Finally, the highest level in the development of co-operation would be the establishment of a common subsidiary aimed at the realisation of mutual projects. Put your interests into practice and target at partners and opportunities in order to benefit from the advantages of co-operation. c) We are cooperating with companies from your region. You have taken the decisive step and established or joint a partnership. Depending on the type and content of your partnership, there are always various possibilities to develop it further. That is why it is reasonable to consider new perspectives such as regional expansion or intensification of your co-operation, e.g. via formation of a common subsidiary aimed at the realisation of mutual projects. 96 prof.dr.sc. dieter walter dr.sc. ingo klein d) We cooperate both with German and European companies. You have made the decisive step from the mere idea towards its realisation. However, there must still be ways to intensify your co-operation. Partnerships often lead to new perspectives. An alternative possibility for growth could be the geographic expansion of your co-operation, not for its own sake, but according to your company’s objectives and markets. 8. Do you attend entrepreneurs’ networking events organised by associations, chambers and the like? a) No, we do not have the time to. It is disappointing that you do not use the opportunity offered to you in this field. Attending such events requires a certain amount of time, indeed. However, these meetings offer plenty of information, contacts and other benefits that you have no access to otherwise. We would like to encourage you to check the wide range of offers. b) We attend entrepreneurs’ networking events occasionally. Entrepreneurs’ networking events are important tools to make contacts, to introduce yourself and your company, and to keep yourself up-to-date concerning the latest developments. In addition, there are plenty of other advantages, for e.g. further education. We recommend you to catch up on these opportunities regularly. c) We attend events organised by trade associations regularly in order to obtain information, learn about further education courses, maintain contacts and advertise our company. You are regularly using diverse advantages of entrepreneurs’ networking events. You have probably made some contacts to some other companies. These business contacts, could give grounds for consideration whether you should set up a network in order to use some special services jointly. Such services may include the provision of information acquisition on current developments, staff qualification as well as special consulting services for company divisions. Networking can help you to gain a comparative edge in regard to costs, know-how and knowledge, etc. This is what some sectoral and inter-sectoral initiatives and support programmes launched in Brandenburg are earmarked on. d) We attend events organised by trade associations regularly and participate in a network of companies actively. Both attending entrepreneurs’ networking events and networking with other companies provide your company with a competitive edge regarding costs, know-how and knowledge. Concerning the development of your network, you can seek professional support. This is what some sectoral and inter-sectoral initiatives and support programmes launched in Brandenburg earmarked on. 9. Does your company initiate business partnerships / networks? a) We might join an existing partnership. However, we would not initiate any. There are plenty of enterprises that are generally interested in partnerships, but they have a wait-and-see attitude. However, nothing will change if you do not dare to take the first step. Besides, in many cases, it makes more sense to take the initiative yourself than just to join an existing network. If you initiate the partnership/network then it is you who decides upon the shape of the partnership / network and you can choose the suitable partners that meet your needs the best. Actually, Brandenburg offers a wide rage of support for those enterprises who decide to take the first step. 97 prof.dr.sc. dieter walter dr.sc. ingo klein b) We would initiate a partnership / network if we had the right partners. In many cases, it really makes more sense to take the initiative than just to join an existing network. If you initiate, then it is you who decides upon the shape of a partnership/network and the choice of partners. It often takes more effort to find the right partners. Nevertheless, there are plenty of companies, which are willing to co-operate in principle. You are surely going to find some in your region as well. Brandenburg offers a wide rage of support for enterprises searching for suitable partners for their initiative. c) We initiated a partnership / network. However, our expectations have not been fulfilled. It is disappointing that your partnership / network fall short of your expectations. In any co-operation, eventually, mutual success also depends on your partner’s activity. To be vital, your co-operation or network needs regular maintenance. Otherwise, it exists only on paper and is of little use. You should not slacken the reins but try to detect weaknesses and identify potential improvements together with your partners. Brandenburg offers a wide range of qualified external expertise to assist you. d) The partnership / network we have initiated perform well. It is good to hear that you initiative has been successful and your partnership / network does not only exist on paper. You must have gained a lot of experience due to your present activities. However, your partnership / network might have reached its limit in the existing form and you would like to expand it. For this purpose, it is advisable to seek contact to other successful groups and, thus, exchange experience. This exchange might help you to intensify or extend your partnership or network even beyond the borders of your federal state. You can seek qualified external support to further develop your initiative. Business management 10. Do you have any c long-term development concepts for your enterprise? a) No, we do not, since development primarily depends more in the market and not on us. The idea of company’s long-term development is by no means senseless. You need to have an objective at least for the next several years: Which markets do you want to be active in? How large shall your company become? Which products or services do you intend to offer? Without a plan, you company will drift aimlessly. We highly recommend becoming more active in long-term planning. b) We do not have any concept yet, but we are going to address this issue as soon as our day-to-day business allows to. You need to have an objective at least for the next several years: Which markets do you want to be active in? How large shall your company become? Which products or services do you intend to offer? It is good that you have recognised the significance of a long-term development planning concept. You should not shelve this issue in deference to day-to-day business. Finally, long-term strategies are not an end unto themselves, but tools to improve your day-to-day business. c) We have long-term ideas, but we have not specified them in writing. It is rather common that long-term objectives, even though they are set and discussed, still lack stipulation in a written form. As a result, these ideas do not manifest in thought and action and thus, cannot be properly communicated. Besides, there is hardly any possibility to make a strict performance review. This limits the chances to develop your company according to objectives. 98 prof.dr.sc. dieter walter dr.sc. ingo klein d) We have been and still are developing long-term concepts and have specified them in writing. You do not leave your ideas for occasional discussions but specify them in writing. Written records are an important tool that is indispensable to targeting at your business objectives as well as to your internal and external communication. 11. How do you plan your corporate strategy? a) We do not need any corporate planning. You can do without many things but you definitely need a corporate strategy. Without a plan, you have neither any objectives to aim for nor any idea how to use your financial recourses. We highly recommend you to introduce at least the simplest form of corporate planning: an operative annual planning that allocates funds to single objectives. b) We do not have any corporate strategy yet. However, we would like to introduce corporate planning as soon as possible. Without a plan, you have neither any objectives to aim for nor any idea how to use your financial recourses. We highly recommend you to introduce at least the simplest form of corporate planning: an operative annual planning that allocates funds to single objectives. c) We do plan, but we do not plan continually. It is good to hear that you have started corporate planning. This serves you as an essential tool for reviewing your performance and success. Nevertheless, it is essential that you really use this benchmark. Furthermore, it is necessary to check in regular intervals, if the selected/chosen indicators are still up-to-date. You should also monitor the implementation of your corporate strategy. d) We have a strategic plan that includes short, medium and long-term objectives as well as ways to achieve them. We implement this plan consequently. Your strategic planning is optimal. Corporate planning and especially its consistent implementation, give you a competitive edge in the market. Congratulations! There is no better way to do it. 12. How do you monitor the success of your business activities? a) We do not need any monitoring due to our good order situation. It is true that a good order situation is the basis for good sales. However, it does not necessarily lead to success. Turnover is just one of many indicators. However, there are other ones too. What about your profit for example? What are your future objectives? Are they the same as they were last year? How many new costumers or clients do you wish to win, and how do you intend to acquire them? We highly recommend you to define your objectives based on these and other criteria in order to be able to evaluate your success. b) We assess our business success by using different economic indicators. You do not rely on vague impressions or on a single economic indicator if it comes to the assessment of the success of your business activities. You get a differentiated overview of your results by using a combination of relevant indicators. Besides, it is important that you compare your results not only with the performance figures of the previous year but also with your objectives. Indicators enable you to monitor the development of your company and react to expected changes at an early stage. However, you should not use indicators as the only criterion of your company’s success. Qualitative information provided by customers serves as an important complement to the above-mentioned tools. 99 prof.dr.sc. dieter walter dr.sc. ingo klein c) We assess our business success by using different economic indicators and customer / client feedback. You already use a combination of quantitative and qualitative information to evaluate the performance of your enterprise; you can monitor whether and to which extent you have achieved your corporate objectives. You could react much faster to expected changes if you monitored your performance on a regular basis. Up to now, you have only compared your results internally. In order to be able to assess your performance, you should also compare your results to those of your competitors. (benchmarking) d) We assess our business success by using different economic indicators and the customer / client feedback. Additionally, we learn from successful competitors and try to outperform them. By using the three above-mentioned tools, you have created the prerequisites for preparing a detailed and objective assessment of the situation of your enterprise. In addition, you have developed the ability to learn from your competitors. This is a good basis for continuous improvement. 13. What management accounting systems / processes do you have in your enterprise? a) We do not have any controlling systems. Having no controlling system in the company is a serious shortcoming of your business management. Management accounting includes the whole process of setting objectives, planning and controlling activities and spending. Collecting, processing and analysing economic data of a company regularly and systematically create a basis for an integrated system of objectives. Based on this system, financial resources can be allocated to single measures that are necessary to achieve corporate objectives. Thus, companies can make rational decisions and react on expected changes. It is obvious that the scale and intensity of controlling depends on the size of the company. We highly recommend you to introduce at least a simple form of management accounting. b) We carefully consider our spending. Cost control is an important element of controlling. However, it is only one of the necessary elements. Management accounting includes the whole process of setting objectives, planning and controlling activities and spending. Collecting, processing and evaluating economic data of a company regularly and systematically create a fundament for an integrated system of objectives. Based on this system, financial resources can be allocated to single measures that are necessary to achieve corporate objectives. Thus, companies can make rational decisions and react on expected changes. c) We have our own cost accounting system. Cost accounting is not the same as management accounting. By setting up your cost accounting system, you have at least generated an exact database for management accounting i. e. for strategic panning and controlling. The data collected will also have to be processed and analysed. Based on this system, financial resources can be allocated to single measures necessary to achieve corporate objectives. Thus, companies can make rational decisions and react on expected changes. d) Our management accounting system is an integral part of our strategic planning and controlling. You are using a management accounting system which is worthy of this appellation. Compared to your competitors, you have created a basis that helps you to assess your performance, make appropriate decisions and react to expected changes at an early stage. 100 prof.dr.sc. dieter walter dr.sc. ingo klein 14. How do you maintain high quality in your enterprise? a) We do not have any quality problems in our company. If you know that you do not have any quality problems even though you do not have a quality assurance system then you must be a very lucky entrepreneur. However, you might have quality problems you are unaware of, since quality is not checked in your company. You can be sure that your customers will detect those problems. However, most probably, they will not be willing to act as quality control personnel. We recommend you to introduce an active quality assurance system in your enterprise. b) We have a final inspection system. Final inspection is the last opportunity to secure the quality required by the customer. This process enables you to find out if anything has gone wrong during the manufacturing process or the rendering of the service respectively. It is advisable not to wait until you finished your product or rendered your service but start quality management at an earlier stage i.e. through clearly defined and standardised processes. As a second step, it might be advantageous to have your processes certified depending on the size of your enterprise and on the competitive situation. c) We use defined and standardised processes. Standardised processes assure the required quality during business processes. You have taken the first important step towards an active quality management by standardising your business processes. As a second step, it might be a advantageous to have your processes certified depending on the size of your enterprise and on the competitive situation. d) Our processes are certified to a quality management system. After you have had your processes certified to a quality management system, you are best prepared to maintain high quality. You are among the best in this field now. Products and services 15. Do you know what competitive advantages your products / services offer? Do you use these advantages? a) Sales figures suffice as indicators for us. Sales figures alone are not reliable indicators of competitive advantages. They do not tell you why your products / services sell. We recommend you to investigate what your most important trumps are. This analysis will also show you in which direction you should develop your products / services and how to communicate this development to your customers. b) We have not analysed the competitive advantage of our products / services yet, but the issue might be important, indeed. It is of great importance, indeed, to identify what exactly the competitive advantages of your products /services are. We highly recommend you to carry out an analysis. The results will show you what issues you should focus on while developing your products / services and communicating this development to your customers. As a next step, you should then try to strengthen the leading edge achieved, since this is, at the same time, the best strategy to maintain it. c) We know why our products / services sell so well and we continue to make efforts to maintain our competitive edge. It is good to hear that you are aware of the competitive advantage of your products / services. This means that you know what issues you should focus on while developing your products / services and communicating this development to your customers. However, we suggest you should go a step further and strengthen the leading edge achieved, since this is, at the same time, the best strategy to maintain it. 101 prof.dr.sc. dieter walter dr.sc. ingo klein d) We analyse our competitive advantages systematically and strengthen them by targeted market development. You are doing the right thing. Those who do not strengthen their competitive edge may loose it any time soon. 16. Are you aware of your core capabilities? a) We know our strengths. Knowing your strengths is essential for the further development of your products and services further. However, it is not enough that you know what your strengths are. You should emphasise your strengths to your customers, employees and co-operation partners. What is more, it is also important to know that not all strengths are equally relevant. We suggest you should investigate if there are any capacities in your enterprise that other companies do not have or can hardly copy. These capabilities represent your core competences. They can refer to the field of technology, human resources management, organisation or administration. This is where you should try to build sustainable competitive advantage. b) We know our strengths and use them actively when dealing with our customers. It is good to hear that you know your strengths and use them when dealing with customers. It would be important to use your strengths in relation to your employees and co-operation partners as well. What is more, it is also important to know that not all strengths are equally relevant. We suggest you should investigate if there are any capacities in your enterprise that other companies do not have or can hardly copy. These capabilities represent your core competences. They can refer to the field of technology, human resources management, organisation or administration. This is where you should try to build sustainable competitive advantage. c) We are aware of our strengths and communicate them to our customers and employees. It is good to hear that you know your strengths and communicate them to your customers and employees. What is more, it is also important to know that not all strengths are equally relevant. We suggest you should investigate if there are any capacities in your enterprise that other companies do not have or can hardly copy. These capabilities represent your core competences. They can refer to the field of technology, human resources management, organisation or administration. This is where you should try to build sustainable competitive advantage. d) We have analysed our core capabilities, develop them systematically, and communicate them to our customers and employees. The fact that you know your core capabilities, communicate and develop them makes you a rather tough competitor. One of the reasons for it might also be that you have recognised that core competence may change or become irrelevant and that core capabilities have to be adjusted regularly. If not, you can still find improvement potential in this field. 17. Do you modify your products /services regularly? a) Our products do not need any modification. Your competitors will be grateful if you do not modify your products. There is no guarantee that your products / services will sell well in the future, too. Everything is changing all the time: customer needs, technological progress as well as the offer of your competitors. No one can elude this rule. 102 prof.dr.sc. dieter walter dr.sc. ingo klein b) We modify our products / services every now and then. It is a good idea to modify your products / services. After all, everything is changing in your environment: customer needs, technological progress as well as the offer of your competitors. You should become more flexible in this regard and determine what needs to be changed at regular intervals. Sometimes even minor modifications might suffice to increase your market opportunities. c) We adapt our products and services regularly to the requirements of the market. It is good to hear that you regularly adapt your products / services to the requirements of the market. This clearly shows that your product strategy is flexible. This strategy considerably increases your market opportunities. You could take a further step and set the benchmark instead of merely react to changes in the market. d) We adjust our products and services systematically to the requirements of the market and actively work on product development. You not only react flexibly to market demand but also take the offensive by following an active product strategy. That will give your competitors a hard time, since now they will have to react to your actions. 18. Do you look for new ideas? a) Our business is good. It is disappointing that you are not interested in new ideas. This fact does not add anything positive to the future of your company. However, your competitors will be glad about it. We highly recommend you to reconsider your attitude before it is too late. b) If I find a new idea by chance, I adopt it. New ideas are too important to leave them to chance. We suggest that you lend chance a hand in this regard. There are plenty of possibilities to find new inspiration to improve your products or optimize your value-adding processes. All you need to do is to keep your eyes and ears open. You should urge your employees to do the same. c) I check up what is new from time to time. It is positive that you do not leave new ideas to chance but actively look for them. However, you should do it on a regular basis. It will increase your prospects of success. You should urge your employees to do the same. d) I look for new ideas systematically and regularly. You are a real candidate for innovation because you are actively and regularly looking for new ideas and do not leave it to chance. There might still be some untapped potential in this field. Employees are quite often not involved in this process sufficiently. Employees 19. How much do your employees know about corporate objectives and strategies? a) We inform our employees about corporate objectives and strategies to an extent that is necessary for their work. According to your answer, you keep a relatively tight rein on your employees. Because of your policy, it might happen that your employees do not fully understand the connections. This policy is a clear obstacle, which prevents you from exploiting the potential of your staff fully and, thus, from attaining your objectives. We recommend you to reconsider your communication policy. 103 prof.dr.sc. dieter walter dr.sc. ingo klein b) We inform our employees about corporate objectives and strategies on a regular basis. Informing your employees about corporate objectives and strategies leads to better understanding and increases the employees’ willingness to contribute. You can fully exploit the potentials of your employees if you involve them in the definition of your objectives and strategies. c) We inform our employees about corporate objectives and strategies on a regular basis. In certain fields, we also involve our employees in the definition process. To utilise the competence of your staff in the definition of your objectives and strategies in certain fields is a good approach, indeed. You might consider whether you could apply this management style to all processes that aim to hammer out corporate objectives and strategies. d) We involve our employees in the planning and developing of corporate objectives and strategies right from the start. You fully exploit the capabilities of your employees by involving them in the entire process of the definition of corporate objectives and strategies. By doing so, you do not only utilise their knowledge but also increase their motivation to implement the corporate strategy. 20. How do you assess the working atmosphere in your enterprise? a) The working climate among our employees is not really good. If you regard the working atmosphere as not good, then you should do something to change it as soon as possible. A negative working climate demotivates your employees. Additionally, it might cause serious communication issues in das-to-day business. b) Our employees treat each other in an objective and neutral manner. An objective and neutral working atmosphere is a minimum requirement to avoid unnecessary communication issues. However, you should not aim for the minimum. We suggest you to find ways to create positive a communication environment in your company. c) The working climate is good in principle, but certain stressful situations have a negative impact on work environment. Stressful situations put the working atmosphere to a severe test. They show how strong the team spirit of your employees really is. If you notice that work pressure leads to problems, you should train your employees to better cope with stressful situations. Professional coachers and tools can help to improve the situation. d) The working climate is good and our employees like to work together. They discuss controversial issues objectively. Some of the employees are friends and spend part of their leisure time together. The working atmosphere described above is simply perfect. Working in your company seems to be fun. You should nourish this climate in order to maintain it. Bringing some of the common leisure time activities into your company might be a good idea. 21. Do you conduct regular appraisals with your employees? a) No, we do not need something like that. Appraisal is an essential tool for personnel management. This is the only way to tell your employees where they stand currently and thus, it is an indispensable source for achievement motivation. These meetings are also important, because they improve the efficiency of communication and help to increase loyalty. 104 prof.dr.sc. dieter walter dr.sc. ingo klein b) We conduct appraisals only in case of a problem. It is good that you approach your employees at least as soon as a problem occurs. However, you should do it on a regular basis for some problems might have turned severe before the affected employee reports them. c) We try to conduct appraisals. However, we do not always manage to do it regularly. You should anchor appraisals in your personnel management as an inherent tool. Your employees must be confident that you take their contribution seriously and that it is worth dedicating themselves to work in your enterprise. d) We conduct appraisals regularly. It is very important that you conduct appraisals on a regular basis. Your employees will get used to appraisals with time, and will prepare for these meetings soundly. This activity is going to provide you with more information, and increase the level of motivation and commitment. 22. How high is the level of your employees’ motivation? a) The motivation of our employees is rather limited at the moment. You should not shrug off motivation problems in your company, if there are any. Otherwise, you might have to put up with severe loss of productivity. Try to identify the reason for the demotivation and find a way to eliminate it. The best way to solve a problem is to talk to your employees. b) Our employees are motivated enough to carry out their work properly. At least, there are no severe motivation problems in your company. However, you should not settle for a work-to-rule attitude. We recommend you to find a possibility to increase the motivation of your employees actively. You can expect more initiatives and higher flexibility from your staff then. c) The motivation of our employees is quite good but it could still improve. You have achieved a lot if your staff is motivated. Therewith, you have already laid the foundation of development, since highly motivated employees will actively support you in your efforts to find potential improvements. d) Our employees like to work with us, they are extremely motivated and accordingly, their contribution is high. Congratulations. There are only a few employers who can make such comments on their staff. 23. Do you enable your employees to work independently? a) That would not work in our company, since our employees need clear instructions all the time. It is rather ineffective if you have to tell your employees what they are to do all the time. It requires an enormous co-ordination effort. You should try to accustom your employees to work on their own step-by-step. This does not mean that you have to trust them blindly. Working independently does not exclude supervision. This process is going to be quite a change for you too. However, if you dare to take the risk, you can cut costs considerably and tap unused resources. 105 prof.dr.sc. dieter walter dr.sc. ingo klein b) We define tasks clearly and, thus, create a rather restricted framework of responsibilities. That is why our employees can work independently. It is essential to define tasks clearly. If your employees are working within set assignments limits independently, you might consider the possibility to gradually provide your employees with more leeway in decision-making. This approach can help you to reduce co-ordination efforts and exploit unused resources in order to increase the expertise and motivation of your employees. c) We set objectives and distribute responsibilities clearly. The capability to wok independently becomes more and more important in most branches of industry. You create an optimal framework to fully utilise the potential of your employees by setting objectives and distributing responsibilities clearly. It might be a good idea to align your entire corporate model to this philosophy. Obviously, it depends on the required level of autonomy of single tasks as well as on the size and the field of activity of the enterprise. You could adjust your corporate model by enhancing teamwork and developing special concepts for single departments (centre and island models). You are welcome to seek advice regarding the adjustment of your enterprise according to the concepts mentioned. Our colleagues and experts will be at your disposal. d) Our enterprise model is based on teamwork, island and centre models, which enhance independent working. Your enterprise model creates optimal conditions to tap the potential of your employees fully. Your company is at the leading edge in this regard. 24. How do your develop the skills and competence of your employees? a) Our employees are responsible for the development of their own skills and expertise. It is advantageous for your employees that you give them space to work independently and develop their competence according to individual preference. However, you should not leave things to chance. We recommend you to monitor the human resource development actively in order to ensure that they go inline with the needs of your enterprise. You should integrate the qualification of your employees into your corporate strategy. b) I talk to my employees about the development of their competence occasionally. It is a good idea that you do not leave the professional development of your employees to chance. However, you should influence their qualification even more actively, because you know best what skills and knowledge your employees need to do their work properly. This is why you should integrate the qualification of your employees into your corporate strategy. Depending on the financial resources and the size of your company, you should consider involving external experts in your trainings. They will provide you with some extra input. We can help you to find the right trainer or consultant. c) We organise trainings regularly in order to develop the skills and knowledge of our employees. It is essential not to leave the qualification of your staff to chance. Regular training is an indispensable tool for a systematic development of your employees’ competence. Depending on the financial resources and the size of your company, you should consider involving external experts in your trainings. They will provide you with some extra input. We can help you to find the right trainer or consultant. d) We use external training programmes offered by experts to develop the skills and knowledge of our employees. These programmes are tailored to the employee’s field of activity. Your human resources development strategy is on a high level. You should maintain this high level, since your employees are your greatest potential. 106 prof.dr.sc. dieter walter dr.sc. ingo klein 25. Do your employees have any foreign language skills? a) No, they do not. We do not need any foreign languages. The lack of language skills is a severe disadvantage. Nowadays, foreign languages, or at least English, are present in every branch of industry. You come across foreign words everywhere: when reading technical manuals, searching international sources for information, communicating with your customers and suppliers. We recommend you to acquire at least basic foreign language skills. b) Our foreign language skills are rather limited, but we would like to improve them. Nowadays, foreign languages (or at least English) are present in every branch of industry. You come across foreign words everywhere: when reading technical manuals, searching international sources for information, communicating with your customers and suppliers. For that reason, you should acquire the necessary foreign language skills as soon as possible. We can help you to find the appropriate language courses tailored to meet the needs of your company and your employees. c) Our foreign language skills are good, but we would like to improve them. It is encouraging that you are not lost when you have to read foreign language brochures and business correspondence, and that you can communicate with your foreign business partners. Your have put your language skills on a solid foundation, so now it is time to apply and systematically improve them. There are plenty of language courses at your disposal. We can help you to find a language programme and adjust it to your needs, if necessary. d) Our executives and core employees have good negotiating skills. You are best equipped regarding foreign language skills. These skills enable your company to act and react in a flexible and confident manner in international business. For this reason, you have a competitive edge on the national scale. You might consider searching for possibilities to further increase your head start. Corporate structure and organisation 26. Do you manage to take enough time to deal with the strategic development of your enterprise? a) Dealing with strategic development would be a waste of time. We need our full capacity for the day-to-day business. Strategic considerations might seem a luxury in the hectic rush of day-to-day business. However, you need to look at the bigger picture in order to be able to align your day-today tasks with your corporate objectives. You need to work out different strategies for different scenarios to be prepared in case the current situation changes. Developing a corporate strategy is worth the time, indeed. The results of the strategic planning will save you more time and effort compared to the time you have to invest into it. b) We would like to work on such a strategy, but we do not have enough time to do it. As soon as you have realised the importance of long-term considerations, the lack of time appears a rather unconvincing excuse. Developing a corporate strategy is indeed worth the time. The results of the strategic planning will save you more time, costs and effort than you have invested into it. Do not wait any longer! c) We dedicate some time for strategic orientation but we would like to intensify our efforts. You have avoided the time trap and recognised that it is up to you how much time you devote to developing long-term strategies and making corresponding decisions. Accordingly, you should take more time for these considerations. 107 prof.dr.sc. dieter walter dr.sc. ingo klein d) The management as well as responsible employees take time for long-term strategic planning. Your answer clearly shows that you are on the right track. You obviously manage to reconcile day-to-day business with long-term planning and decision-making. You made the right decision in favour of an active instead of a passive strategy. The time you invest into strategic planning will pay off well. 27. How do you perform internal communication in you enterprise? a) It is enough if relevant information converges in the management. It makes sense. And what does your management do with all the information obtained? How do your employees receive the information they need to be able to work properly? Information flow should never be a one-way road. We highly recommend you to revise your corporate communication policy. b) The management passes relevant information on to employees. It is understood that your employees must be provided with relevant information. The information flow should not be a one-way road. c) The exchange of information takes place between management and employees and as well as among employees, if required. You have recognised that the information flow should never be a one-way road. You have developed ways of communication for proper exchange of information. The next logical step would be to use this approach more extensively. d) We ensure that our employees have an optimal level of information, and exchange information regularly. Your corporate information management is highly developed. You ensue that no relevant information falls by the wayside. In terms of your information policy, you do things in the right way. You might consider complementing your information management system by a corporate knowledge database. 28. Do you arrange team meetings regularly? a) No, we do not. We do things in a quick and simple way. You can indeed work without team meetings. However, you miss out an important management tool. There are companies that drive team meetings over the top but managing off the cuff is not an optimal solution either. You refrain from using an essential management tool and risk extensive losses in quality and communication. We highly recommend you to consider your current management practice. b) Team meetings only take place if problems occur. Team meetings become indispensible, indeed, if a problem occurs. A team meeting can help to correct mistakes in working processes that became obvious due to the problem. However, it would be better, if you clarified the objectives, tasks and competence of your team in advance. That would save both time and money. We recommend you to use team meetings as a management tool. c) We try to arrange team meetings. However, they take place rather irregularly. Your approach is quite reasonable, if you arrange team meetings even if no problems have occurred. You obviously use these meetings as a management tool. You should make sure that these meetings take place on a regular basis. You might also bundle questions that would have been otherwise discussed in-between and consider them at team meetings. We recommend you to schedule team meetings and mark them in your company’s calendar. 108 prof.dr.sc. dieter walter dr.sc. ingo klein d) Our team meetings take place regularly according to a schedule. You have established an important management tool by introducing regular and scheduled team meetings. Nothing can stand in the way of your team’s success in this respect now. 29. What role do electronic data processing systems play in your enterprise? a) Computers are not important at all. Our enterprise can do quite well without them. You are poorly equipped, indeed, if you do not have any computer in your company. Do you really write your invoices by hand, make calculations on a slip of paper and do not use the Internet at all? That will not work well for a long time. We highly recommend you to purchase a computer and learn to use it before it is too late. b) We have a few computers. Enterprises use different computer systems and structures in their day-to-day business. It is worth the effort to consider in which fields you could save time and money by introducing computer technology. Using a corporate network is the standard approach. Such a network can reduce your communication effort between the single workstations. Depending on the size of your enterprise and the kind of your working processes, we recommend you to consider the implementation of system solutions. We can advise you on relating issues. c) There are certain divisions in our company that could not work without computers. Your answer implies that you have introduced computers in some divisions. As a result, you surely save time and money there. You should consider now whether you could expand your computer system to other departments. You can rely on your own experience in this field. d) Computers play an important role in our company. Most of our processes are computerbased. You are saving a lot of time and money ever since you introduced computer applications to most of your processes. Depending on the size of your enterprise and the kind of your working processes, you might consider tapping another potential and integrate single island solutions into a comprehensive computer system. We can advise you on relating issues. 30. Which means of communication do your use in your enterprise? a) We use telephone and fax. You use only a minimum of the available communication tools. We recommend you to add e-mail to your channels of communication except if your company is very smallsized. b) We use telephone, fax and e-mail. You use the most common means of communication. However, you miss the unlimited advantages that the Internet can offer. We recommend you to take the next step and start using the Internet because it is an inexhaustible source of up-to-date information. Additionally, you could attract the attention of your targeted group of customers by setting up your own website. c) We use telephone, fax, e-mail and the Internet. You use the most common means of communication; besides, you have added e-mail and the Internet both of which have become standard applications by now. We suggest setting up your own website to present your company to your target group efficiently. This is only a minor step to make, and we can advise you on the relating issues. 109 prof.dr.sc. dieter walter dr.sc. ingo klein d) We use telephone, fax, e-mail and the Internet and have our own website. You are optimally equipped in regard to communication and information. You should update your website on a regular basis. Regular updates serve as a technical foundation for your external communication. Websites can be used in more ways, not only for representation purposes. You might wish to add special features to your website and turn it into an interactive communication tool or a sales platform. _________________________________________________________ 110 prof.dr.sc. dieter walter dr.sc. ingo klein [Introduction to the evaluation of the answers given in the questionnaire.] Dear Participant, the IHK-Projektgesellschaft thanks you for participating in our enterprise evaluation. You will find the individual evaluation of your answers to our questions. This first feedback shows you the current situation and position of your enterprise, the areas that need to be changed as well as further development potentials. [Summary feedback / alternatives] green The evaluation of your answers has shown that your company is in a good position overall. Of course, there is always some potential for improvements. You might be looking for new challenges, i.e. by expanding your business or entering new markets. The development partnership „Schrittmacher OderSpree“ and its qualified experts offer you support concerning information, consulting and further trainings. Contact us! amber The evaluation of your answers has shown that your company is in a good position in certain fields. However, other areas of your business have some shortcomings, which should be remedied as soon as possible. The development partnership „Schrittmacher OderSpree“ and its qualified experts offer you support concerning information, consulting and further trainings. Contact us! red The evaluation of your answers has shown that there are severe shortcomings in different business areas of your company. You should try to remedy these shortcomings as soon as possible. The development partnership „Schrittmacher OderSpree“ and its qualified experts offer you support concerning information, consulting and further trainings. Contact us! 111 prof.dr.sc. dieter walter dr.sc. ingo klein Appendix 5: List of problems for the assessment of the qualification and consulting needs based on the standard problem checklist We suggest that you focus on three dependent variables: market success (sales, turnover, market share) corporate success (efficiency, cost-benefit ratio) solvency What shall constitute the basis of comparison? We suggest setting the following benchmarks: results on timescales (monthly, quarterly and annual reports and forecasts, target-performance comparison), peer companies (market leader, best examples), Various services/ fields of activities of your enterprise and your industrial sector Example baker: bred and rolls, cakes and cookies, retail sales, peddling, delivering to hotels and restaurants, example hotel: single holiday apartments, and double restaurants rooms, and apartments, coffee bars, seasonal prices, special prices, promotion programmes, etc. Which models of comparison do we suggest? We suggest using a simple break-even analysis for the evaluation of success in the market and operational result, calculating operational results without interests, annuities, tax and any extraordinary profits in order to be able to analyse the actual profit and allocate financial resources. The resulting figures can be complemented by a cash flow calculation. calculating cash and solvency and making a list of complementary and analytic indicators which are tailored to the information needs of the respective company. Internal indicators (for different periods of time and business segments) may be based on a business assessment. Convincing other companies to provide information is a precondition for a benchmark comparison. Suggestions for regional benchmarks can be developed in workshops with suitable participants (participants active in the same industrial sector, participants with similar questions from different branches of industry, etc., see the following section). 112 prof.dr.sc. dieter walter dr.sc. ingo klein Appendix 8: Evaluation sheet for trainers / moderators for the participant-oriented assessment of the foci for one seminar or workshop Problem total point per points participant remarks Increasing turnover in the core business Increasing turnover by expanding the range of products / services Entering new market areas Acquiring more information about the market Acquiring more information about the procurement market (terms and conditions) Learning customer wishes and expectations, purchase patterns Improving marketing (advertising, public relations) Finding the reasons for the success and failure of competitors Cooperating with other companies 1 (establishing partnerships for joint offers) Improving product and service quality Cooperating with other companies 2 (Finding local partners especially in case of activities in foreign countries) Developing middle and long-term strategies and objectives Overview of the most 113 prof.dr.sc. dieter walter dr.sc. ingo klein important indicators of the enterprise Regular targetperformance comparison (sales, turnover, costs, productivity and solvency) Improving the exchange of information within the company Improving the working atmosphere Commitment, independent working style, reliability, qualification of employees Rationalising enterprise structure and organisation (processes, IT, telecommunication) Problems mentioned by the participants in addition to those probed for: Appropriation of points: • „very important“: • „important“: • „less important“: • „it is not a problem at all“: 4 3 2 1 points points points point 114 prof.dr.sc. dieter walter dr.sc. ingo klein 7 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Bibliography: Camp, Robert C.: Benchmarking. München/Wien 1994 Lamla, Joachim: Prozessbenchmarking. München 1995 Schreiterer, Ulrich.: Benchmarking, in: Anke Hanft (Hrsg.), Grundbegriffe des Hochschulmanagements, Neuwied/Kriftel: Luchterhand 2001, S. 21-25 Doppler, Klaus; Lauterburg, Christoph: Change Management. Campus Verlag, 2005 Trinczek, Rainer; Pongratz, Hans J. u.a.: "Veränderungen erfolgreich gestalten - Repräsentative Untersuchung über Erfolg und Misserfolg im Veränderungsmanagement", Zusammenfassung einer Studie der TU München und der C4 Consulting Düsseldorf, 2007 Senge, Peter M.: Die fünfte Disziplin. Kunst und Praxis der lernenden Organisation. Klett-Cotta, Stuttgart 1996 North, Klaus: Wissensorientierte Unternehmensführung: Wertschöpfung durch Wissen. Wiesbaden 1999 Bengt Karlöf, Kurt Lundgren, Marie Edenfeldt Froment: Benchlearning – Good Examples as a Lever for Development, John Wiley & Sons, LTD, Chichester 2001 Modellversuchsbericht: Zukunft gestalten, Erhöhung der Wertschöpfung der KMU durch effektives Wissensmanagement und Lernkulturwandel (WISENT), IHK Frankfurt/Oder, 2004 Ostdeutscher Sparkassen- und Giroverband: Tourismusbarometer Jahresbericht 2004, Berlin 2004 Hans-Rainer Nau: Controlling-Instrumente (Buch und CD), Rudolf Haufe Verlag GmbH & CO KG, Planegg / München 2007 Horvath und Partner: Das Controllingkonzept, dtv Frankfurt am Main, aktuelle Ausgabe Witt / Witt: Controlling für Mittel- und Kleinbetriebe, dtv München, aktuelle Ausgabe P. Womack / D.T. Jones: Auf dem Weg zum perfekten Unternehmen, München 1996 U. Blötz (Hg.): Planspiele in der beruflichen Bildung (mit CD-ROM), Bundesinstitut für Berufsbildung, Bonn 2001 B. Högsdal: Planspiele in der Aus- und Weiterbildung, Bonn 1996 www.wirtschaft.brandenburg.de Kurzportrait Brandenburg, in: Bertelsmann-Stiftung, Bundesländer im Standortwettbewerb, Studie Gütersloh 2007 TC&T Consult und Training GmbH: QM - Systeme, Frankfurt am Main 2007 Schrittmacher OderSpree: Den anderen immer einen Schritt voraus, IHK-Projektgesellschaft mbH, Frankfurt/Oder) 115 prof.dr.sc. dieter walter dr.sc. ingo klein 8 Additional information: The original report has been translated with the consent of the authors and by the means of the Programme Lifelong learning – Leonardo da Vinci- Transfer of Innovation. Part of the Appendix has not been translated. 116