Bridal Belt Tutorial

Beautiful Bridal
DIY
DIY Bridal Belts and
Sashes can add a
individual touch to
your special day.
See below for tutorials
on three different
styles of belts that will
suit any bride.
Boho Lace Sash
Materials:
Bridal Lace Style 6 White (1m)
5016027000
38mm Grosgrain Bridal White (40cm)
5101038010
Step One:
Step Two:
Make sure to get a piece of lace
with 2 full appliques. Cut them
carefully apart. Arrange lace
appliques so they face away from
each other.
Sew lace onto the centre of the
ribbon. Finish ribbon edges with a
“V” cut, leaving enough to tie into
an elegant bow.
Glam Metallic Belt
Materials:
6 Row Bling Ribbon Silver (0.5m)
5988004925
5cm Rhinestone Beaded Brooch
6317101695
38mm Double Faced Satin Silver
5100038925 (1m)
Step One:
Step Two:
Cut the 6 Row Bling Ribbon in half
lengthwise to get 2 pieces.
Sew the Bling Ribbon to the centre
of the Satin Ribbon. Secure with
a stitch to every 4th row of Bling
Ribbon.
Step Three:
Step Four:
In the centre of the ribbon, attach
the brooch.
For extra stability sew through the
fabric backing of the brooch. Finish
with a “V” cut to the ends of the
ribbon.
Classic Rhinestone Sash
Materials:
38mm Double Faced Satin Bridal White (1m)
5100038010
Layered Center Stitched Organza Trim (.25 m)
5983036000
6 Row Bling Ribbon Silver (.25m)
5988004925
9mm x 18mm Horse Eye Jewels
50930090001
Rhinestone Button
6317027925
Step One:
Step Two:
Start by lightly tracing out your
placement of the jewels in the
centre of the ribbon with pencil.
Sew Horse Eye jewels into place.
Step Three:
Step Four:
Cut strips of the Bling ribbon and
sew into place between the jewels.
Sew on centre rhinestone button
and the organza trim around it.
Finish with a “V” cut on the ends of
the ribbon.