View EZ-Drill Brochure

Slab Riders
Quick-Release Bit Guide
ease in changing bits & drill steel
Oil Injection
individual oiling from a single reservoir extends drill
life and reduces downtime
Hole Spacing Guide
ensures quick re-positioning
Model 210-4 SRA
Automatic Drill Shutoffs
extends drill life & reduces downtime
Patented Roller Bearing Feed
for friction free drilling
2
���������������
Model 210-4 SRA
Slab Riders
Model 210-3 SRA
Model 210-5 SRA
Model 210-4 SRA
with optional On-Grade Conversion Kit
with optional Tow Bar Package
Standard Features of the 210-3, 210-4 & 210-5 SRA’s
Self-propelled - powerful enough to tow the air compressor
Multi-point oil injection - provides individual oiling from a single reservoir
Automatic drill shut offs - extends drill life; reduces downtime
Totally pneumatic - requires a minimum of 100 cfm (PER DRILL)
Standard 18” drill depth - operates in a 4’ patch and drills within 6” of a corner
Adjustable spacing - up to 36” or more
Easily adjusted to drill into the center of a 24” slab
Patented tri-steering feature - allows one operator to maneuver unit with ease
Internal regulator - protects drill motors from high pressure
Optional tow bar kit - attaches the air compressor to the drill
Optional on-grade conversion kit - unit is more versatile; fits more applications
All slab-riders can drill vertically and
can be adjusted to drill at angles
Standard “skew” feature
on all Model 210B SRA’s
Optional on all other Slab-Rider Models
Model 210B-2 SRA
Model 210B SRA
Standard 18” drill depth - fits in a 4’
patch and drills within 6” of a corner.
Totally pneumatic - requires a
minimum of 100 cfm
Adjustable spacing - up to 36” or more
Totally pneumatic - requires a minimum
of 200 cfm
Production and speed - can drill
1 5/8” diameter hole 9” deep in
approximately 25 seconds
Oil injection - individual oiling from a
single reservoir
Standard 18” drill depth - fits in a 4’
patch and drills within 6” of a corner
Optional on-grade conversion kit provides greater versatility
Adjustable to drill into center of
concrete slab - from 6” to 24” thick
concrete
Patented tri-steering feature - allows one
operator to maneuver with ease
Includes 25’ of 1 1/4” Air Hose
3
On-Grade Models
Model 65B
Model 85B
Smallest E-Z Drill available - fits in a 2’ patch and
drills up to 8” deep
A small drill system with a heavy duty drill
Also available in a 12” drill depth
Totally pneumatic - requires a minimum of 20 cfm
Fits in a 30” patch - drills up to 9” deep with
12” UC bit
Drills from 1/2” to 7/8” diameter holes
Drills from 5/8” to 2” diameter holes
Vertical conversion kit available
Optional mobile system available
Totally pneumatic - requires only 32cfm of air
Vertical conversion kit available
Model 110B
Downsized version of the Model 210B designed to fit in 3’ patches
Totally pneumatic - requires a minimum of
50 cfm
Standard 12” drill depth
Includes mobile system - for easy positioning
Drills from 5/8” to 2” diameter holes
Vertical conversion kit available
Model 210B-2
Totally pneumatic - requires a minimum of
200 cfm
Inexpensive multi-gang system - ideal for
lane additions, airport work, and other straight
line on-grade applications
Standard 18” drill depth
Mobile system included - can be configured
to fit in a 4’ area”
Dual Purpose Guide Wheels
can also be used as transport wheels
- easily moved by one person
Model 210B
Totally pneumatic - requires a minimum of 100 cfm
Standard 18” drill depth - fits in a 4’ patch and drills
within 6” of a corner
Includes mobile system - for easy positioning
Production and speed - can drill a 3/4” diameter hole
9” deep in approximately 15 seconds
Vertical conversion kit available
4
���������������
Model 210-5 EQ MT
with Air Tank
Standard Features of the 210-3, 210-4 & 210-5 EQ MT
Skid loader or wheel loader quick attachment
Heavy duty 50 lb. class rock drill - 1” x 4 1/4”
chuck (standard)
Available with up to six drills
Standard “side shift” feature - drill two sets of holes without repositioning
the carrier
Balanced frame and mounting system - fits most backhoes, excavators, etc.
Twin Vertical
Totally pneumatic - requires a minimum of
260 cfm
Totally pneumatic - requires a minimum of 100 cfm (PER DRILL)
Multi-point oil injection - individual oiling from a single reservoir
Model 210
Standard 17” drill depth
“Floating” Bucket Curl Pin
for fast repositioning
Internal regulator - protects drill motors from high pressure
Adjustable drill centers - from 5’ to 10’
Air operated remote controls - does not
require any electrical or hydraulic hook up
Versatile - ideal for slab jacking, mud jacking,
or drilling straight or angled holes for pulling
patches, etc.
Safety swivel lock - safer during transport
Automatic drill shut offs - extends drill life; reduces downtime
Extra height adjustment - for extreme overlay conditions
Swivel mounting - drill unit can swivel 360º
Optional air tank - can be used with a much smaller air compressor
to provide sufficient air to the drills
Easy to use Operator Control Panel
finger tip controls
Automatic Safety Swivel Lock
keeps drill in locked position while transporting
Model 210-4 EQ MT
5
Equipment Mounted
Model 210-5 EQ MT
Model 210-3 EQ MT
Special Design Models to Fit Any Drilling Application
Model 20 UTL
The Model 20 UTL is a single vertical
drill system designed for gas utility
companies to drill through streets to
pinpoint gas leaks, but can be used for
most any vertical drilling application. It is
lightweight and includes wheels for easy
maneuverability and allows for one person
to load and unload the unit. It requires a
minimum of 100 cfm of air, and has an 18”
standard drill depth.
Air Motor/Gear Box Drill
Model 110-3 SL
Designed for drilling up to 6ʼ deep.
Custom designed to fit any application
This unit can drill off of either side, or off
the front using automatic swivel; includes
remote controls. Availiable from 2 - 6 drills
Extended Vertical System
Shown on a special cart, designed
for drilling straight up; with vacuum
attachment
Model 210B
Shown with special mounting on a man lift for
drilling horizontally into bridge deck
Model 210B SRA
w/ Modified Mast
Used for drilling into the top of
a parapet wall
6
4-Gang Core Drill System
Shown mounted on a parapet wall for
drilling into concrete and rebar
Deeper drill depths are available. 54” drill
depth shown above.
���������������
Vertical Conversion Kits
Accessories and Other Products
E-Z Drill Trailer
Model 210B
For hauling one Model 210B-2 SRA,
or any two single models. Includes a
winch for easier loading. Also includes
ramps, 2” ball hitch, 13” wheels and a
light kit.
Model 65B
Our vacuum systems are available
to fit any E-Z Drill system; includes
vacuum, hoses and adapter.
Totally pneumatic - operates from the
same air compressor as the drill unit.
with Vertical Conversion Kit
Pin-Puller
Our custom designed pin-puller attaches
to a lifting device to pull paving form or
string line pins safely and quickly. E-Z
Drill Pin-Pullers result in reduced labor
costs and the risk of injuries.
Vacuum Systems
with Vertical Conversion Kit
Cure Trailer Sprayer
Heavy duty design for a wide variety of
concrete cures. Self loading, pump the
cure directly from the barrel into the tank.
Includes 5hp Honda engine and Roper
pump; 40ʼ of 1/2” sprayer hose.
Rock Drill Oil
Recommended for all E-Z Drill models.
Available in 1-gallon and 5-gallon containers.
E-Z Drill stocks a complete line of
drill bits and drill steel
7
���������������
Specifications for Standard Models - variations available upon request
Model
Min Patch Size 1
in.
(cm)
Drill Depth 2
in.
(cm)
Hole Dia.
in.
(mm)
Drill Dist. From Corner
in.
(cm)
Air Req.
cfm
(m3)
Hose Size - (ID) 3
in.
(mm)
Drill
Motor
Chuck Size
in.
(mm)
Weight
lb.
(kg)
65B
24 & 30
(60.9 & 76.2)
8 & 12
(20.3 & 30.5)
1/2 -7/8
(12.7 - 22.2)
6
(15.2)
20
(0.56)
3/4”
(19.1)
CP 9C
3/4 RD X 3-3/4
(19.0 X 95.2)
65
(29.5)
85B
30
(76.2)
9
(22.9)
5/8 - 2
(15.9 - 50.8)
6
(15.2)
32
(0.90)
3/4”
(19.1)
CP 14
7/8 X 3 1/4
(22.2 X 82.6)
85
(38.6)
110B
36
(91.4)
12
(30.5)
5/8 - 2
(15.9 - 50.8)
6
(15.2)
50
(1.40)
3/4”
(19.1)
CP 22
7/8 X 3 1/4
(22.2 X 82.6)
170
(77.2)
210B
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
100
(2.80)
3/4”
(19.1)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
230
(104.4)
210B-2*
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
200
(5.60)
1 1/4”
(31.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
710
(322.3)
210B SRA
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
100
(2.80)
3/4”
(19.1)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
385
(174.8)
210B-2 SRA
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
200
(5.60)
1 1/4”
(31.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
1040
(404.1)
210-3 SRA
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
300
(8.40)
1 1/2 - 2”
(38.1 - 50.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
2000
(908.0)
210-4 SRA
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
400
(11.20)
2”
(50.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
2200
(988.8)
210-5 SRA
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
500
(14.00)
2”
(50.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
2400
(1089.6)
210-3 EQ MT
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
300
(8.40)
1 1/2 - 2”
(38.1 - 50.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
1400
(635.6)
210-4 EQ MT
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
400
(11.20)
2”
(50.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
1700
(771.8)
210-5 EQ MT
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
500
(14.00)
2”
(50.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
1900
(862.6)
210-6 EQ MT
48
(121.9)
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
6
(15.2)
600
(17.00)
2”
(50.8)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
2100
(953.4)
20 UTL
N/A
18
(45.7)
5/8 - 2 1/2
(15.9 - 63.5)
N/A
100
(2.80)
3/4”
(19.1)
CP 32A
7/8 X 3 1/4
(22.2 X 82.6)
207
(94.0)
210 TWIN
VERTICAL
N/A
18
(45.7)
3/4 - 2 1/2
(19.0 - 63.5)
N/A
260
(7.28)
1 1/4”
(31.8)
CP 69
1 X 4-1/4
(25.4 X 107.9)
930
(422.2)
1. Minimum patch size is the smallest area the unit will fit in and drill the depth listed
2. Drill depths given are standard - other drill depths available upon request
3. All sizes shown are for 25ʼ of hose or less
* Back wheels must be configured in order to fit in a 48” area
E-Z Drill, Inc. — Stillwater, Oklahoma
International: 405-372-0121 Toll Free:
800-272-0121
E-Mail:
[email protected]
Fax:
405-372-1429
07/03