SOLIDS HANDLING PUMPS
Transcription
SOLIDS HANDLING PUMPS
SOLIDS HANDLING PUMPS SELTORQUE ‘S’ Pump Range Solids Handling Up To 100mm - Environmentally Friendly Unique Auto Self-Priming - Indefinite Dry Running 100mm To 300mm Options - Super Silent From 58db(A) SELPRIME TM ‘S’ PUMPS 5db9(A) S100 6db2(A) With solids handling capabilities of up to 100mm and indefinite dry running ability, the Selwood Seltorque range of vortex pumps form the foundation upon which the company’s international reputation has been built. One of Selwood’s original pump designs, its simplicity offers easy operation and unparalled reliability coupled with inherent safety. The environmentally friendly Seltorque range has the unique Selprime automatic air pump priming system together with an oil immersed mechanical seal enabling them to operate in the most arduous of conditions encountered in the construction, mining and municipal industries. These pumps offer an unequalled performance in effluent disposal and slurry handling. The pumps are available with a choice of builds having a wide range of diesel engine, electric motor and chassis options as well as close coupling on most models. 5db8(A) 5db9(A) ENVIRONMENTAL Selprime The unique original Selwood self priming system utilising a water tolerant diaphragm SELPRIME air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated with other priming systems. Super Silent Super Silent versions are available with noise levels from as low as 58 db(A). Fully Bunded All Super Silent units are fully bunded, ensuring that any fuel or oil spillage is retained within the bund and does not contaminate the surroundings. Drain plugs within the unit’s chassis can then be used to remove the fluids. Auto Stop/Start & Telemetry Float control for automatic stopping and starting of the pump using the latest technology to give an easy to use, effective and efficient control. S200, S150 S100 Super Silent models Seltorque S100 S100 Seltorque S100 & S150 updated 11/02 S150 updated 11/02 1600 rpm 1600 rpm 22 70 20 22 70 20 60 18 16 50 14 60 18 16 50 14 40 ft m 12 10 30 8 40 m 12 10 30 8 20 6 4 10 2 0 Telemetry allows remote measurement and reporting of the pumps operation directly to pre-selected mobiles or land lines, providing real time alarm messages for high level float, failure/ start, engine fault and emergency stop activation. 20 6 4 10 2 40 80 120 160 200 0 m3/h Detailed pump curves are available at www.selwoodpumps.com 40 80 120 160 200 240 280 320 360 m3/h ft ‘S’ PUMPS Super Silent (UK) Rags & Fibres (UK) S100 Electric Solid Material (Morocco) Oil Spill Clean-up (Venezuala) S150 (USA) Sewage (UK) Canal Sludge Cleaning (France) Seltorque S200 Ver 4 S200 Seltorque S300 December 2008 NEW CURVE (Mark Page) 3/05 Includes blue curve (Mark Page) 2/09 1450 rpm 1600 rpm 25 S300 50 80 160 45 70 140 40 20 60 50 15 40 10 30 100 30 ft m 120 35 ft m 25 80 20 60 15 20 10 0 40 10 5 100 200 300 m3/h 400 500 600 20 5 0 240 480 720 m3/h 960 1200 S200 Specification S100 S150 S200 S300 m³/h 160 320 540 1100 m 21.3 21.3 18.5 39 Max. Solids Size mm 75 100 100 100 Self Priming Lift m 8.8 8.8 8.8 8.8 Air Handling l/s 24 24 24 24 Power Required kW 16 24 42 80 Pump Speed rpm 1600 1600 1450 1600 Inlet / Outlet Port mm 100 150 200 300 Clean Water ● ● ● ● Water with Fine Solids ● ● ● ● Water with Larger Solids ● ● ● ● Water with Rags & Fibres ● ● ● ● Sludges ● ● ● ● Slurries ● ● ● ● Oils & Hydrocarbons ● ● ● ● Screened Sewage ● ● ● ● Unscreened Sewage ● ● ● ● Capacity Delivery Head Applications ‘S’ PUMPS Solids Handling Up To 100mm Environmentally Friendly Unique Auto Self-Priming Indefinite Dry Running 100 To 300mm Options Super Silent From 58db(A) Super Silent db(A) @ 7m * Open sets exclude fittings 264 x 122 x 144 (790kg) 272 x 122 x 144 (920kg) - - 175 x 100 x 129 (758kg) 200 x 100 x 128 (950kg) 257 x 147 x 168 (1690kg) - 300 x 158 x 170 (938kg) 309 x 158 x 170 (1130kg) - - 231 x 147 x 173 (1535kg) 239 x 149 x 173 (1695kg) 298 x 175 x 210 (2340-2385kg) 431 x 224 x 234 (4650kg) 409 x 177 x 210 (1875kg) 416 x 177 x 210 (2035kg) - - 59 58 62 64 Specifications and illustrations are subject to revision without notice. Pumps Selwood Limited, Bournemouth Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 3ZL. UK Tel: +44 (0)23 8026 6311 Fax: +44 (0)23 8026 0906 Web: www.selwoodpumps.com E-mail: [email protected] P628 English 2/13 Designed by Selwood. Printed on 170gsm Regency Gloss using a Xerox DocuColor 242. Length, Width, Height (cm)* + Dry Weight
Similar documents
The Complete Selwood Pump Range
Environmentally friendly Selprime automatic self priming
More information