x - American Instrument Exchange

Digital Pulse Mixer
Digital Pulse Mixer Shown with Laydown pad & R80 1039 Top
Glas-Col’s Digital Pulse Mixer:


Performs high or low speed mixing (orbital)
Repeatable mixing results
DPM can be used in the following applications:
Our mixers are affordable and can be automated or customized for any vessel. Applications include solution phase synthesis
when a good mixture of heterogeneous solutions is needed. In Solid Phase chemistry the pulsation feature is extremely
useful for the full reaction of resins, and other materials. In cell culture Glas-Col’s density in one plate is equivalent to four
plates from other manufactures. In the QuEChERS procedure, our systems are well adapted for the various vials associated
with this method.








Volumetric Flask
96-well plates
Tests tubes racks
Combinatorial reaction blocks
Micro Reactors
Gilson Racks
Cryogenic tubes
Most any type of mixing application

Quick Easy Cheap Effective
cereals and processed products.
Rugged
Safe: analysis of multiple pesticide residues in fruit, vegetables,
Glas-Col, LLC
711 Hulman Street., P.O. Box 2128, Terre Haute, IN 47802-0128 USA
Phone. (812) 235-6167, Fax. (812) 234-6975
E-mail: [email protected]
1/13
Digital Pulse Mixer
The Digital Pulse Mixer has the following features:











Micro-processor based control technology, for control of DC brushless motors
Speed 150 to 1500 rpm, Speed Display Resolution: 1.0 RPM, Speed Setting Increment: 10 RPM
4-line back-lit LCD display
Offset 0.070”
Built-in digital timer (seconds: 1-60, minutes 1-60, hours 1-24)
Preset run times of 30, 60, 90 and 120 seconds
User selectable pulse profile (Pulses-per-minute: 1-100), Ppm-duty-cycle: 1-99 %
Timer and Pulse mode may be combined for timed-pulse mode
Communication port (USB)
User-friendly membrane switch interface (4-button)
Optional software for real time data acquisition
Specifications:
Size:
Platform size:
Voltage:
Mixer mounts:
On/Off switch:
Finish:
Cord:
Load:
Weight:
16”w x 18”d x 9” h (to top of drive plate)
11-5/8” x 14-1/4”
120 or 240-volt models
Vibration absorbing for minimum transfer to lab bench
Located on front of unit
Light gray and black powder coat finish
Detachable 3-wire 5’ long
Up to 8 lbs at lower speeds
75 lbs.
Cat. No.
Description
099A DPM12
099A DPM24
099A LC1012
099A LC1024
099A VC4014
099A VC6014
R80 1039
Mixer base Digital
Mixer base Digital
Mixer base Analog
Mixer base Analog
½ foam pad for (14) 40ml EPA vials for Digital/Analog base
½ foam pad for (14) 60ml EPA vials/50ml centrifuge for Digital/Analog base
Hold down top with viewing window for vials, fits DPM and LC models
Input
Voltage
120V
240V
120V
240V
N/A
N/A
N/A
RPM
Price
150-1500
150-1500
100-2000
100-2000
N/A
N/A
N/A
$4429.00
$4497.00
$3030.00
$3167.00
$176.00
$176.00
$350.00
Glas-Col, LLC
711 Hulman Street., P.O. Box 2128, Terre Haute, IN 47802-0128 USA
Phone. (812) 235-6167, Fax. (812) 234-6975
E-mail: [email protected]
1/13