AIRDUC® PUR-INOX 355 MHF-AS FDA AIRDUC® PUR

AS
AIRDUC® PUR-INOX 355 MHF-AS FDA
Ex
Abr.
Pre-PUR®
1
Microbe
FOOD
EL
+15%
Abrasion resistant and antistatic suction
and transport hose; PUR <10⁹ Ω + stainless
steel, heavy, smooth interior
3
2
Applications
• food industry, pharmaceutical industry (FDA, EU
guideline): foodstuff, pharmaceutical
• food industry, pharmaceutical industry: vacuum
conveying devices, vacuum hoppers, suction
conveyors, dosing systems, pelleting machines/
tablet presses
• food industry, pharmaceutical industry: mixer,
dryer, packaging machines, bulk-bag (big bag)charging and discharging, mills
• animal feed transport
• industrial vacuum cleaners
• extraction or conveying in explosion hazard areas, electrostatic discharging/ antistatic/ electrically conductive hoses
Properties
• permanently antistatic wall: electrical and surface resistance <10⁹ Ω
• according to TRGS 727 and ATEX 94/9/EC:
for pneumatic transport of flammable dust and
bulk materials (zone 20, 21, 22 inside), for aspiration of flammable dust (zone 22 inside), for
transport of flammable liquids (inner zone 0, 1,
I.D.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2), for transport of non-flammable liquids , for
use in zone 1 and 2 (gases), for use in zone 0
(gases)
heavy model
flexible with low weight
smooth interior
optimized flow properties
increased pressure and vacuum resistance
high tensile strength and tear resistant
small bending radiuses
kink-proof
gas- and liquid-tight
approved by an independent testing laboratory for the complete hose acc. to EU Directive
10/2011 and the latest Directive 2015/174,
food grade polyurethane, complies with: FDA
21 CFR 177.2600
odorless and tasteless
microbe and hydrolysis resistant
good resistance to oil, gasoline, and chemicals
good resistance to UV and ozone
very good low temperature flexibility (better than
comparable ester-polyurethanes)
free of softener and halogens
conforms to RoHS guideline
in / mm
O.D.
in
Overpressure
psi
Underpressure
inHG
Bending
Radius
in
1 / 25
1.25
50.33
26.58
1.25 / 32
1.65
44.89
1.5 / 38
1.89
- / 40
Temperature range
• -40°F to 195°F
Design, Material
AIRDUC® profile hose
1. spring steel wire firmly embedded in wall; spiral:
stainless steel wire (INOX)
2. profile with optimized flow properties; wall: permanently antistatic premium ether-polyurethane
(Pre-PUR® )
3. wall thickness 0.06 inch approx.
4. reinforcement of the primary abrasion areas
Delivery variants
• further diameters and lengths available on request
• transparent (standard)
• customer-specific product marking
• wall: "bioplastic" material derived from renewable raw materials without food applicability
• as a pre-assembled hose system with CONNECT connectors
• customized connectors
Weight
lbs./ft
Stock
length
ft
Production
Length
ft
Order No.
3/4
0.19
25
-
355-0025-1118
25.84
1.02
0.30
25
-
355-0032-1118
42.42
25.54
1.14
0.35
25
-
355-0038-1118
1.97
42.05
25.25
1.18
0.35
25
-
355-0040-1118
2 / 50-51
2.36
33.80
24.65
1.38
0.45
25
-
355-0050-1118
2.36 / 60
2.76
28.35
21.56
1.57
0.52
-
25
355-0060-1118
2.5 / 63-65
2.95
26.30
19.95
1.67
0.55
25
-
355-0065-1118
- / 70
3.19
24.50
17.85
2.44
0.65
-
25
355-0070-1118
3 / 75-76
3.39
22.84
16.39
2.58
0.71
25
-
355-0075-1118
- / 80
3.58
21.45
14.90
2.72
0.75
-
25
355-0080-1118
4 / 100-102
4.37
17.26
10.48
3.27
1.00
25
-
355-0100-1118
5 / 125-127
5.35
13.90
7.85
3.96
1.25
25
-
355-0125-1118
6 / 150-152
6.34
11.60
5.30
4.65
1.60
25
-
355-0150-1118
7 / 178-180
7.52
10.15
4.45
5.47
1.95
25
-
355-0180-1118
8 / 200-203
8.46
9.15
4.00
6.02
2.10
25
-
355-0200-1118
xxx
20160225
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend
radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com. NORRES reserves the right to modify technical data at any time.
Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product.
The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.
www.norres.com
1
AS
AIRDUC® PUR-INOX 355 MHF-AS FDA
Ex
Pre-PUR®
Abr.
Microbe
FOOD
EL
+15%
Accessories
CLAMP 212
CLAMP 216
CLAMP 212 EC
CLAMP 217
CLAMP 213
CONNECT 228
CONNECT SAFETY
CLAMP ASSEMBLY 231
CONNECT PRESS
ASSEMBLY 232
CONNECT MOULD
ASSEMBLY 233
CONNECT THREAD
FITTING 234
CONNECT TRI-CLAMP
FITTING 245
CONNECT DAIRY FITTING
247
CONNECT ASEPTIC
FITTING 249
CONNECT 240 + 241
CONNECT 240 + 241 MHF
CONNECT 240 EC
CONNECT 242
CONNECT 243
CONNECT 243 MHF
CONNECT 244
CONNECT 244 MHF
CONNECT 245
CONNECT 245 MHF
CONNECT 246
CONNECT 246 MHF
CONNECT 223
CONNECT 270-271
20160225
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend
radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com. NORRES reserves the right to modify technical data at any time.
Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product.
The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.
www.norres.com
2