IT6000E SQC - Oakley Weigh

IT6000E SQC
Weighing Terminal for Statistical Quality Control In
Compliance with the Regulations for Prepackaged Goods
IT6000E SQC is a checkweighing terminal
for capture and evaluation of samples in
compliance with the regulations for statistical
quality checks.
The evaluation method can be selected, either
compliant to EC regulations for prepackaged
goods or pharmacopeia or with freely chosen
limits. Filling quantities can be checked either
by weight or by volume.
IT6000E SQC supports connection of one
analog or digital scale base of any type.
High resolution and fast signal processing
of the IT6000E SQC terminal permit
precise capturing of samples and fast
evaluation.
Checkweighing results of samples and
batch are indicated with colored marking on
the TFT display. Operator prompting with
clearly structured onscreen menus ensures
fast and error-free operation and minimum
training requirements.
Essential features:
l Product file for up to 250 products
l 3 different check methods:
individual, additive or 2-phase with
emptying the test object
l Entry of tare weight or tare weighings with
calculation of mean value
l A surcharge can be specified for products
whose filling quantity may change after
checking
l Entry of up to 8 additional acceptance
criteria (eg 'Label ok?')
l Simultaneous evaluation of samples for up
to 50 production lines, also for identical
products
l Entry of two additional IDs with assignment
to sample (eg 'Operator') or batch (eg
'Order')
l Output of sample and/or batch results on
printer, host system and/or saving to file
l Graphical view of distribution of measuring
results (Gaussian distribution) over one or
several samples
l Ring buffer for statistics with 2500
entries, eg for the last 100 days with 25
samples per day.
Systemtechnik und
Industrieautomation GmbH
IT6000E SQC
Weighing Terminal for Statistical Quality Check
Rapid and precise checks:
l Fast signal processing with more than 200
updates / sec
l High W&M approved resolution of 6000d,
(digital platforms up to 32,000d)
l Automatic capturing of weight and
tolerance zone when scale is settled
l Automatic allocation of tolerance zones
according to selected check method
(prepackaged goods / pharmacopeia)
l Tare weighing or calculation of average
tare weight.
Capturing of all relevant data:
l Comprehensive statistics functions
with mean value, standard deviation,
number of weighings, etc., simultaneous
processing of up to 50 batches
l Evaluation by product and/or batch
l Calculation of correction factor for
adjustment of feeding device
l Output of check results on printer or PC,
print format configurable
l Option to store results in internal memory
or on USB stick.
Simple and secure operation:
l Operator is guided on a high-contrast
color TFT display
l Data entry is via numeric tactile acidresistant keyboard with multiple key
assignment for alpha characteres or
optional full-size PC keyboard.
Security:
l Data is retained in the event of power loss
l Password protection for all data
l Battery-backed realtime clock
l Cleartext display of error messages.
Date/Time:
Ref.Weight
26.10.00 / 15:45
Batch 120009
500.0 g
Number
....10
Tare Weight
470.0
485.0
515.0
530.0
g
g
g
g
Mean Val. 499.7 g
Deviation. 5.533 g
Options:
Connection to PC program PC SQC for the
centralized management of check results and
product data.
Max:
504.0 g
-TU1: .....1
Min:
484.0 g
.....9
.....0
.....0
....10
> 2,5% TU1
Construction:
Display / operation:
Desk/wall version
l
l
l
SW. 1.00
Sample
1
-TU2: .....0
-TO1:
-TO2:
+TO2:
TU1%:
High ingress protection
IP65
Accessories:
l Column for floor mounting
l Protocol printer
l Protective dust/splash cover.
.....Crystal Sugar Fine
15.0 g
TU2:
TU1:
TO1:
TO2:
Result:
Product:
Integrated USB interface (option):
To connect printer, scanner, PC keyboard or to
store check results on USB stick.
Operating temperature:
–10°C to +40°C, max. 95% relative
humidity, non-condensing.
Example for protocol print
Product-No. 125
Ethernet interface (option: WLAN):
Integrated Ethernet ot WLAN interface, access
to internal result file possible via SFTP.
Electrical connections:
115 (–15%) – 240 (+10%) VAC;
50/60 Hz, option: 12–30VDC,
power consumption max. 20 VA.
Typical check cycle (check method 'Individual'):
l Choose production line
l For new product choose one from product file
l Enter batch data
l Capture weight when threshold is exceeded and start checkweighing
l Assign captured weight to tolerance zone, enter in statistics file
l Capture next sample until complete
l Display and optionally print result of sample
l On end of batch display and optionally print result of batch
l Next cycle...
Line No.15
Weighing electronics:
l Integrated signal amplifier for
connection of up to 16 strain gauge
loadcells in 4- or 6-wire mode
l Calibration as single or multiple-range and
as single or multi-interval scale
l Option to connect Sartorius IS platforms or
Mettler-Toledo TBrick platforms.
Stainless steel housing, IP65
for desk-top or wall-mount
installation or with optional
column for floor mounting
Dimension WxHxD:
330x239x134mm
Directives: 2009/23/EG, 2004/108/EG,
2006/95/EG, 2004/22/EG
Panel-mount version
l
l
l
l
Stainless steel housing, IP65
panel-mount installation
Dimension WxHxD:
285x224x69mm
Cut-out in panel:
268x207mm
Result of sample weighing
Display of sample data with colored
marking of result
EC approval as non-automatic
weighing instrument
Standards: EN 45501, OIML R76-1,
EN 61000-6-2, EN 61000-6-3,
NAMUR NE21, EN 60950
SysTec Systemtechnik und Industrieautomation GmbH
Tel. +49 (0) 2238 - 9663-0 - www.systecnet.com
Subject to change without notice
ST.2309.1431 IT6000E_SQC_DBE.PDF 01.2012
Batch result
Display of Gaussian distribution of a
product over several samples
ETL certified in compliance
with UL 60950-1 and
CSA C22.2 No. 60950-1
EMI compliance with
FCC Part 15
Sales and service