vector watch online guide REVIEW_001 2015.10.02 _V.02_ (EN)

W E LC O M E
V E C TO R
TO
WAT C H
U s e r G u i d e / Ve r s i o n 1. 0
CONTENTS
3
G E T T I N G S TA R T ED
3
Get The App
3
Pairing you r Vector Watch/Set up account
4
The Vector Watch App
4
Customise your Vector Watch/App Store
6
Watch Controls
7
Charging
8
F E AT U R E S
8
Streams
9
Notifications/Filtering Notifications
11
Activity Tracking
13
Time
13
Alarms
14
Countdown Timer
15
CARE INSTRUCTIONS
16
SAFET Y
16
Operating temperature
16
Water resistance
17
General safety & handling
17
Bat ter y warnings
18
Safety Tips
19
U P DAT E S
19
Updates/Updating you r Watch
19
Troubleshooting
21
Unpairing
22
Compatibility
23
L EG A L A N D I M P O R TA N T I N FO R M AT I O N
23
Declaration of Conformity
23
FCC ID & Cer tification Statement
24
Industr y Canada Cer tification Statement & ID
26
Recycling
27
Ser vice and Warranty
PAGE 2 OF 27
G E T T I N G S TA R T E D
GET THE APP
To begin using your product you first need to get the Vector Watch app.
To obtain the app go to http://vectorwatch.com/start on your mobile device.
This URL can also be accessed from a computer which will direct you to
a page with links to each platform’s app store.
PAI R I N G YOU R
V E C T O R W AT C H /
SET UP ACCOUNT
Af ter installing the VectorWatch app on your mobile phone, please make
sure that you have your vector watch nex t to your phone. To pair your
Vector Watch with your phone you will need your watch ID to easily
identify your device in the app.
NOTE
I n order to obtain your Vector watch ID, you have to keep
the top and the middle button pressed at the same time
on the watch for at least 5 seconds and navigate through
the settings menu until you reach the watch ID (R x x x x or
Sx x x x). Example: R1A2B.
Now you can launch the app. It will guide you through the get ting
star ted documentation, and ask to connect to your watch.
When connecting, you need to select your watch from a list of available
Bluetooth devices. The Watch ID from your watch should match the one
you will select. Once selected, the app will automatically connect to the
watch.
The app will also ask you to create a Vector account. You need this
account so that you can access your data (like activity historical data) if
you reinstall the app or change phones or watches.
The app also needs some specific rights, and will ask your approval. For
example, it needs to read your phone’s notifications to for ward them
to the watch, and access to your calendar to be able to show it on the
watch.
PAGE 3 OF 27
T H E V E C T O R W AT C H A P P
Use the Vector Watch app to set up your Vector Watch account, and
customise watch faces and watch settings. You can access our watch
app store to create the exact experience that you want.
CU STOM I S E YO U R
V E C T O R W AT C H /
APP STORE
You can create your own experience with your Vector Watch. The app
store contains the most current and updated faces and applications to
improve and grow the functionality of your watch. Visit as often as you
like to obtain current faces, streams and applications to create your own
Vector Watch experience.
From the WA T C H M A K ER screen,
tap the S T O R E but ton and you
will see the 3 categories, * F A C E S ,
S T R E A M S and A P P S . 1 2
indicate that these are already
loaded on your watch. Tap on
any unselected item to highlight
the item. Once highlighted a
Scroll through each list to see an
image and description of each
item available. Items with selection
will appear. Tap this arrow to begin
the download procedure. 2
D O W N L O A D & I N S T A L L A R RO W
STORE
15
ON
MAKER
STORE
FA C E S
APPS
FA C E 1
Description
FA C E 2
Description
ON
FA C E 3
Description
FA C E 2
Description
WATCH
MAKER
ACTIVITY
ALARMS
SETTINGS
1
2
PAGE 4 OF 27
STREAMS
MAKER
STORE
FA C E S
APPS
STREAMS
STORE
FA C E S
APPS
APPS 1
FA C E 1
Description
Description
APPS 2
FA C E 2
Description
Description
APPS 3
FA C E 3
Description
Description
APPS 4
FA C E 2
Description
Description
3
STREAMS
4
Once you select to download
and install, the arrow will turn
into a progress ring, indicating
that your item is downloading to
your phone and being installed
onto your watch. You will feel a
small vibration from your watch,
* CA T E G O R Y
MAKER
confirming that the item is now
loaded and ready to use. 3
Tap on any already installed item
and a red delete icon will appear,
tap this to remove this item from
your watch. 4
D E FI N I TI O N S
F AC E S
Means a combination of a watch dial and hands, resulting
in different designs for your watch face. They can also be
customized with streams to show a variety of contextual
information including, but not limited to the current date,
weather or the time in a different time zone.
ST R E A M S
Means the steady flow of data transmitted to and or received
by your watch. You will be able to customise each watch face
with information that is impor tant for you. Add different
time zones, weather information, steps walked and more.
In your watch maker, just tap on any watch face to
customise the streams that appear on it.
A PP S
Means applications that you can install on your watch.
Apps that you will find are controlling apps – such as a Nest
app, news apps, or productivity apps. A nest app for
example lets you control the temperature in your house.
News apps can show par ticular new headlines, e.g CNN.
Productivity apps like a ToDo app let you check items on
and off a TO DO list.
PAGE 5 OF 27
W AT C H C O N T R O L S
Navigating through your Vector watch is simple and all screens can be
accessed by one of three buttons; UP and DOWN scroll buttons and a
SELECT button.
UP
SELE CT
D O WN
The top and bot tom but tons UP, DOWN are scroll but tons and will move
you up and down through an app, through watch faces, and navigate lists;
Where applicable in par ticular apps they also have a unique action that is
clearly indicated with a name applicable to that but ton.
The middle button is the S E L E C T button.
A single push of the middle S E L E C T button will advance
you to a new screen or app.
A quick double press of the middle S E L E C T button will
take you back one step.
A long push and hold of the middle S E L E CT button will take
you all the way back to the home screen from any screen.
N A V I G AT I O N E X AMP LE:
ACCESSING A WATCH FACE
Scroll U P and D O W N using the top and or bottom buttons to locate or
get to the app or watch face that you need, then use the middle S E L E C T
button to access or get into an app or select a watch face.
Pressing the middle S E L E C T button when an app is selected will open that
par ticular app. Exit it by pressing and holding the middle S E L E C T button.
For analog watch faces, pressing the middle S E L E C T button on a watch
face will activate the calendar ring around your watch face showing you
when you have events in your calendar on the phone.
PAGE 6 OF 27
D O U BL E PRE SS
LO N G PRE SS
CHARGING
Charge your Vector Watch only with the supplied charge cable. Using
unofficial charge cable might damage the device. Connect the magnetic
end of the cable to the watch and the other end to a U SB por t on your
computer or a wall adaptor with a USB por t. Make sure that the charge
head fits correctly into the por t on the back of your watch. The magnetic
connector will help align and hold the cable in place during the charging
process.
The “charging” face will appear and indicate, the current time, percentage
charged and the progress bar around the perimeter of the face.
N OTE
Power levels will be indicated on the home screen of
your Vector app as well as being accessible in your watch
settings menu.
C H E C K T H E B AT T E R Y L E V E L O N Y O U R M O B I L E A P P
The battery level will be displayed within the Vector app, in the Watch Maker section:
Left upper corner for iOS and WindowsPhone apps
Left lower corner for Android app
The battery level will be calculated according to usage and performance starting from
the last charging cycle.
Please refer to the Care Instructions section of this manual for other safety
information about batter y and charging.
PAGE 7 OF 27
F E AT U R E S
C U S T O M I S E W AT C H FA C E S
STREAMS
Streams is a tool you can use to fur ther customise your Vector Watch
to bring the most impor tant information directly to your wrist, always
visible with a simple glance.
Tap on a watch face in the Watch
Maker screen . The watch face
will pop up, indicating the areas
that you can modif y with your
streams . 1
Pick a stream from the list of icons
that will provide the information
most impor tant to you and drag it
into your preferred location on the
watch face. 2
DONE
DONE
DAY/DATE
DAY/DATE
STOCKS
STOCKS
MEETING
WATCH
MAKER
STOCKS
TIME ZONE
ACTIVITY
ALARMS
WEATHER
AM/PM
MEETING
WATCH
MAKER
SETTINGS
1
STOCKS
TIME ZONE
ACTIVITY
ALARMS
2
PAGE 8 OF 27
WEATHER
SETTINGS
AM/PM
Most streams have a settings page,
which will pop up after you place
your stream on the watch face.
Use this to define information such
as which stocks to track, locations
that you want to see in your world
time face. 3
S TO C K S
Hit ‘ DONE ’ when you have
confirmed your settings and you
will be returned to the Watch Maker
screen. Your new watch face is
now set and the face on your
watch will update. 4
DONE
Stocks
STORE
15
ON
AAPL
Stock 2 (Tap to change)
Update
EVERY 20 SECONDS
Update (Tap to change)
Send notification when
stock price changes
NO
NYC
Notify me when stock changes
22°C
Source (Tap to change)
WATCH
MAKER
ACTIVITY
3
ALARMS
SETTINGS
4
N O T I F I C AT I O N S
When paired with your smartphone, your Vector watch will receive
notifications as defined by you either during the initial setup or by
making changes in the settings menu.
The kind of notifications that can be enabled are:
EMAIL
SMS
FAC E B O O K
S Y S T E M N O T I F I C AT I O N S
A larms and alerts regarding the status of
your watch or app.
IN C O M I N G C A L L S
You are able to see the incoming callers
ID and select if you want to reject or
answer the call. When selected, the call
will be rejected / answered on your
phone, as the watch has no microphone /
speaker capabilities.
PAGE 9 OF 27
When receiving a notification your watch will vibrate, if you turn your
wrist so that the watch is facing you, the message will be displayed. This
will only occur in the first 10 seconds from the moment you’ve received
that notification. If displayed, when your hand returns back to the
original position, the notification will be dismissed. This will also dismiss
the notification from your phone’s notifications center.
If you miss or ignore the notification aler t, a solid outer ring will appear
on your watch face. This indicates a message is waiting for you which
you can view with a single push of the MIDDLE button. Use UP and
DOWN to scroll through multiple messages or just use the MIDDLE
button to dismiss each message individually.
F I LT E R I N G N O T I F I C AT I O N S
Through the use of settings in the Vector watch app, you will be able to
define what type of notifications you want to receive on your wrist.
Go to S E T T I N G S / A L E R T S to star t filtering what you see on your wrist.
The default settings are to mirror
your notification settings on your
mobile. 1
If you deselect M I R R O R M Y
P H O N E , the list of current apps
SETTINGS
that can send aler ts to your phone
will appear below. Here you can
individually select/deselect each
app in order to reduce the amount
of aler ts that come to your wrist. 2
ALERTS
SETTINGS
ALERTS
MIRROR MY PHONE
MIRROR MY PHONE
Allow all apps.
Filter the apps that can send alerts to
your watch by toggling them On and Off.
REMINDERS
CALENDAR
MESSENGER
MAIL
LINKEDIN
W H AT S A P P
ALL OTHERS
1
NOTE
2
iOS Only: While initially the list of apps will be empty,
your watch will learn which applications send notifications
to your phone, and will add them to this list.
PAGE 10 OF 27
N O T I F I C AT I O N S D N D
From the main screen of the app, you can set watch vibrations on
or off. When off, the watch will not vibrate anymore when receiving
notifications. When receiving a new notification, it will get through to
your watch and the notification ring will turn on.
The watch can be set to also go into “do not disturb” mode when you are
sleeping or can be synced with your phone’s calendar to enter “do not
disturb” mode when you are in a meeting.
ACTIVIT Y TR ACKING
Your Vector watch includes a ver y simple but accurate activity monitor
where you are able to track, steps, distance, calories burned and sleep, all
measured against motivational goals set by you.
Your activity settings and goals will all be defined by you in the Vector
Watch app.
Tap A C T I V I T Y to go to the activity
screen. 1
Initially you will be asked to enter
your information. You can choose
STEPS
CALORIES
4000
10000
SET
ACTIVITY
PROFILE
SLEEP
DISTANCE
6HRS
SET
ACTIVITY
PROFILE
8HRS
WATCH
MAKER
to provide this information later but
inputting the required information
will help more accurately track your
activity levels. 2
ACTIVITY
ALARMS
SETTINGS
1
2
PAGE 11 OF 27
After you have completed the settings
section you will return to set your
goals.
10000
CALORIES
SET
2600
Tap on the + sign in the center of the
measurement that you wish to set. You
will then be able to directly change the
number up and down by “ turning” the
hand around the individual dial. 3
2760
SLEEP
DISTANCE
6HRS
3KM
8HRS
Turning the mobile device on it’s
side will reveal your activity history.
Use the activity history data to help
set goals. Every day at midnight the
activity data is reset. 4
8KM
Tapping on any point of the activity
curve reveals a specific value. 5
WATCH
MAKER
ACTIVITY
ALARMS
SETTINGS
3
DISTANCE
STEPS
CALORIES
SLEEP
TOTAL 10000
AVG.
6000
8AM
9AM
10AM
11AM
12AM
1PM
2PM
TODAY
3PM
4PM
5PM
6PM
7PM
WEEK
8PM
9PM
9PM
10PM
11PM
12PM
1AM
MONTH
2AM
3AM
4AM
5AM
YEAR
4
STEPS
DISTANCE
SLEEP
CALORIES
TOTAL 8000
2000
AVG.
4300
BASE
500
8AM
9AM
TODAY
10AM
11AM
12AM
1PM
2PM
3PM
4PM
5PM
6PM
WEEK
7PM
8PM
9PM
9PM
10PM
11PM
12PM
MONTH
5
PAGE 12 OF 27
1AM
2AM
3AM
YEAR
4AM
5AM
TIME
On each watch face you can read the time. The watch gets the current
time from your phone, thus needs to be connected to the phone to tell
the correct time. When the time zone on your phone changes, it will
change automatically on the watch. Open the VectorWatch app on your
phone to force a time sync.
ALARMS
Set multiple alarms either in the Vector Watch app or directly on your watch.
IN THE APP
Tap A L A R M S to set a silent alarm on your watch.
Tap A D D to enter the setting dial.
Rotate the dial until the numbers
indicate your desired then tap O K
to confirm the time. 1
You can name each of your alarms
in the text bar. 2
12:00
ADD
OK
Tap ADD to set your first alarm
on your new Vector watch.
WATCH
MAKER
ACTIVITY
ALARMS
SETTINGS
WATCH
MAKER
1
ACTIVITY
ALARMS
2
PAGE 13 OF 27
SETTINGS
08:00
08:00
08:00
WATCH
MAKER
WA K E U P
WA K E U P
ACTIVITY
ALARMS
WATCH
MAKER
SETTINGS
EDIT
ACTIVITY
ALARMS
SETTINGS
4
3
Add as many alarms as you like,
swiping up and down to view, edit
or delete each alarm. 3
Swipe each alarm from right
to left in order to edit or
delete that alarm. 4
O N T H E WATC H
Go to the A L A R M app by navigating with the U P / D O W N buttons, then
use the middle S E L E C T button to enter the app.
Once in the app, navigate your existing alarms with the U P / D O W N
buttons. You will be able to enable/disable them, or edit the alarm time.
Exit to the main screen by holding the middle S E L E C T button.
Tap A L A R M S to set a silent alarm on your watch.
COUNTDOWN TIMER
Keep track of time with this simple timer function.
Using the U P or D O W N buttons to Navigate to the T I M E R face. Once you
display the T I M E R face, a single press of the M I D D L E S E L E C T button
will take you into the T I M E R setting mode. Press the U P button to add
or D O W N to reduce the length of the timer. A shor t press will increase
in increments of 1 minute, a longer press will leap in increments of 10
minutes.
When the desired timer length is met, press the M I D D L E S E L E C T
but ton again to star t the timer. You can now exit this face by pressing
U P or D O W N and the timer will continue to run in the background.
When the timer goes off, you will feel a vibration and see an aler t pop
up on your watch face.
PAGE 14 OF 27
CARE
INSTRUCTIONS
Yo u r w a t c h w i l l r e q u i r e a c e r t a i n a m o u n t o f c a r e t o k e e p i t c l e a n a n d i n
good condition. Please use a clean, lint-free cloth with warm water to
r e m o v e a n y d i r t f r o m t h e c a s e . To c l e a n t h e l e n s u s e a c l e a n c h a m o i s
cloth.
AV O I D S U B M E R G I N G T H E WAT C H C A S E I N A N Y L I Q U I D O T H E R T H A N WAT E R
AV O I D P U S H I N G A N Y O F T H E WAT C H B U T T O N S W H I L E S U B M E R G E D I N WAT E R
D O N O T C L E A N Y O U R WAT C H W H I L E C H A R G I N G
D O N O T C L E A N Y O U R WAT C H U S I N G C O M P R E S S E D A I R
It is normal for your charge cable to pick up some dirt over time,
you can wipe this with a lint free cloth.
D O N OT S U B M E R G E T H E C H A R G I N G C A B L E I N A N Y L I Q U I D
The case back should be opened only
b y Ve c t o r o r i t s a u t h o r i z e d s e r v i c e p r o v i d e r. U n a u t h o r i z e d i n d i v i d u a l s
who open the case back can cause damage to your watch that is not
c o v e r e d i n y o u r Ve c t o r w a r r a n t y a n d w i l l v o i d y o u r Ve c t o r w a r r a n t y.
D O N OT O P E N T H E C A S E B AC K .
D O N O T R E P L A C E T H E B AT T E R Y. B a t t e r i e s f o r y o u r w a t c h s h o u l d b e
r e p l a c e d o n l y b y Ve c t o r o r i t s a u t h o r i z e d s e r v i c e p r o v i d e r. R e m o v a l ,
and or replacement of and even attempts to remove or replace the
battery by any unauthorized persons can cause damage to your
w a t c h t h a t i s n o t c o v e r e d i n y o u r Ve c t o r w a r r a n t y a n d w i l l v o i d y o u r
Ve c t o r w a r r a n t y.
PAGE 15 OF 27
SAFETY
I N F O R M AT I O N
O P E R AT I N G T E M P E R AT U R E
Use and store your product in temperatures between -10°C/14° F and
50°C/122°F. This is the temperature range that the watch is designed to
operate. Exposing your product to extremely low or high temperatures
may result in damage, malfunction, or even explosion. As an electronic
device with metal casing, use caution when the product has been
exposed to high/hot or low/cold temperatures as the watch sur face may
be warm or cold to the touch or on your wrist.
W AT E R R E S I S TA N C E
The watch is water resistant up to 5 ATM. This means the watch can
be gently submerged under water to a depth of up to 50 meters. This
allows the watch to be worn in low impact, low pressure gentle water
environments such as taking showers (except for hot showers), normal
rain showers, relaxed surface swimming, shallow snorkeling, and
washing hands etc.
The device however does not support high impact, high pressure
activities such as diving into water of any depth from any height,
swimming under water at depths with high pressure or per forming
activities, to include waterspor ts, underwater swimming or other
activities that involve high impact or pressure. In addition, avoid hot
water temperature such as that water in spas, hot tubs, saunas, steam
rooms, or showers because heat may distort the gaskets or might cause
condensation inside the watch.
While the watch is submerged in water, D O N O T P R E S S T H E B U T T O N S .
This will cause water infiltrations.
In case the watch was subjected or exposed to saltwater, give it a gentle
rinse with fresh water shor tly afterward. This will prevent the salt from
damaging the finish of making the buttons sticky or immobile.
Once the product gets wet, water may remain in gaps of the main unit.
Gently, shake the product well to drain water.
Before submerging the watch in water, please verify that:
• The glass is not cracked.
• The top ring and the back case are tightly screwed.
• Do not expose the watch to excessive heat, over 60 degrees Celsius.
PAGE 16 OF 27
GENERAL SAFETY
& HANDLING
• W H E N D R I V I N G . When driving a car, driving is your first responsibility.
Using a mobile device or accessory for a call or other application
while driving may cause distraction. Keep your eyes on the road.
Anyone caught operating the device while driving could face penalties
according to local law.
• A R O U N D E X P L O SI V E S . Do not use in areas where sparks from the
product might cause a fire or explosion.
• O N A I R P L A N E S . Observe all rules and instructions for the use of
electronic devices. Most airlines allow electronic use during flight but
not during takeoffs and landings. There are three main types of airport
security devices: X-ray machines (used on items placed on conveyor
belts), magnetic detectors (used on people walking through security
checks) and magnetic wands (hand-held devices used on people or
individual items). You can pass your product through airport X-ray
machines. BUT DO NOT SEND IT T HRO U G H AIR PO RT MAGNETIC DE T E CT O R S
OR E X POSE IT TO M AGN E TIC WANDS.
• Always follow and adhere with any airline, transpor tation, securit y, or
other special regulations applicable to the area you are located and or
traveling.
B AT T E R Y W A R N I N G S
• Do not allow metal objects to contact or short circuit the battery terminals.
• This product is equipped with an internal rechargeable battery, which
should be replaced only by Vector or a Vector authorized service
provider. Use of an incorrect battery or incorrect replacement can cause
damage to the watch and void your warranty.
• Your product contains a lithium ion battery that may be subject to special
transportation, and baggage claim/check requirements in some countries.
• There is risk of explosion if the battery is replaced with an incorrect type,
or damaged in any way and must be recycled or disposed of separately
from household waste in accordance with local environmental laws
and guidelines. Please visit ww w.vectorwatch.com/returns for more
information about battery replacement services and see the section
entitled R E C Y C L I N G below for more information about battery recycling.
• Always unplug the charger from the wall socket after the product is fully
charged to save unnecessary power consumption of the charger.
PAGE 17 OF 27
SAFETY TIPS
• Do not drop, strike or shake your product.
• Do not attempt to repair, modify or manufacture the product.
• Please refer to the RECYCLING section of this manual for information on
the proper disposal of batteries and watches .
• Do not open, disassemble, crush, bend or deform, puncture or shred
the product.
• Do not inser t foreign objects into the product.
• Do not place the product in a microwave oven.
• Do not expose the product to fire, explosion or other hazards.
• Clean with a soft, damp cloth. Don’t use harsh chemicals (such as
alcohol, benzene or thinners) or detergents to clean your product.
• Do not use the product in places where it may be sprayed with highpressure water.
• This product is not shock resistant. Do not drop the product or subject
it to shock or shaking. Doing so might damage or deform the main unit
causing water leak.
U S E RS WI T H P AC E M A K E R S A N D OT H E R M E D I CA L D E V I C E S SH O U L D
• Not carry the product in a breast pocket.
• Use the wrist opposite the pacemaker to minimize the potential for RF
inter ference.
PAGE 18F 27
U P D AT E S
The most frequent types of app updates are bug fixes. Bug fixes are
typically covered in “revision” or “bug fix” releases. Bug fixes don’t
change the structure or feature set of an app. Instead, these updates
make sure that the app is working as designed.
U P D AT I N G YO U R W AT C H
To initialise the update process, open the Vector Watch mobile app and
navigate to S E T T I N G S then tap U P D A T E W A T C H .
The current available update will be displayed.
After the watch update has successfully ‘initialised’, updates will be
ready to process. The full update process can take up to 7 minutes to
complete. You will see the progress bar fill in around the outside of the
watch face.
TROUBLESHOOTING
If your watch screen is blank, plug into charger to charge your watch.
If your watch screen freezes and is unresponsive follow the RESET
instruction below.
If the watch is connected, watch faces can be removed or added,
activity/alarms can be set but the notifications are not received, you
have to press both side buttons (UP & DOWN at the same time) for 10
seconds (then release), in order to Reset the watch.
HARD RESET INSTRUCTIONS
HARD RESET is per formed by simultaneously pressing both UP & DOWN
Navigation buttons for 10 seconds then release. Your watch should
change into reboot mode and you will see the transition bar fill around
the outside of Factory reset Start Watch Unpair Phone the face with
the Vector logo in the middle of the screen. Wait for this process to
complete before pushing any more buttons.
If the watch cannot be connected after the previous action, or you
experience any other failures, repeat the above process and when the
watch is loading (you see the transition bar fill around the outside of the
face as mentioned above) press any button to access the menu. You will
then see three options on the watch.:
• Star t watch - corresponding to the U P P E R button
• Unpair Phone - corresponding to the M I D D L E button
• Factory Reset - corresponding to the L O W E R watch button
PAGE 19 OF 27
On your phone, go ahead and close the VectorWatch app.
Also on your phone - go to S E T T I N G S / B L U E T O O T H and F O R G E T
the watch.
On the watch, press the L O W E R B U T T O N to factory reset it.
Your watch will reboot.
Reopen the VectorWatch app on your phone and reconnect to your
watch. Every thing should be back to normal now.
PAGE 20 OF 27
U N PA I R W AT C H
1.
Close the VectorWatch app on your phone.
2.
Also on your phone - go to S E T T I N G S / B L U E T O O T H and
F O R G E T the watch.
3.
Hold the U P P E R and M I D D L E buttons on the watch for 5 seconds
to to display the watch settings menu and navigate to the U N PA I R
WAT C H option.
4.
Tap once on the watch middle S E L E C T button, to unpair.
5.
Select BA C K from the watch settings menu to exit.
6.
Reopen the VectorWatch app on your phone and reconnect to your
watch. Every thing should be back to normal now.
P R E S S U N PA I R P H O N E A N D
WA I T F O R 3 S E C O N D S .
P R E SS F AC TO R Y RE S E T A N D
WA I T F O R 3 S E C O N D S .
T H E N P R E SS ST A R T W A T CH .
PAGE 21 OF 27
ANDROID
1.
Double tap on the watch middle S E L E C T button (in order to display
the watch settings menu) and navigate to the U N PA I R WA T C H
option
2.
Tap once on the watch middle S E L E C T button, to unpair
3.
Long press on the watch middle S E L E C T button to leave the watch
settings menu
4.
Open Vector mobile app and navigate to S E T T I N G S
5.
Tap on F O R G E T WA T C H
6.
Tap on F O R G E T option
C O M PAT IB I L I T Y
To consult the updated list of supported phone devices, please visit
w w w.vectorwatch.com/support.
Vector does not warrant that your product, including without limitation,
the technology and or integrated circuit(s) or par ts included in the
product, will not become obsolete or that such items are or will remain
compatible with any other product or technology including those listed
herein and or the above referenced link with which the product may be used.
PAGE 22 OF 27
LEGAL AND
I M P O R TA N T
I N F O R M AT I O N
D E C L A R AT I O N O F
CONFORMIT Y
We, Vector Watch UK Limited of 35 Piccadilly, London W1J 0LP declare
under our sole responsibility that our products Vector Luna, model:
L-110 and Vector Meridian, model: M-120 and in combination with our
accessories, to which this declaration relates is in conformity with the
appropriate standards EN 300 328:V1.8.1, EN 301 489-1/17, EN 62 479:2010,
EN 60 950-1:2006, RSS 247, PART 15(c), CISPR 22, and A S/NZS 4268:2012
and the provisions of, Radio Equipment and Telecommunication Terminal
Equipment directive 1999/5/EC, RoHS2 directive, REACH and WEEE.
____________________________
Name
Joe Santana
Title
CEO
F C C I D A N D S TAT E M E N T
C ER T I F I C AT I O N S TAT EM EN T
This device complies with par t 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
inter ference, and (2) this device must accept any inter ference received,
including interference that may cause undesired operation. of purchase
by the original purchaser. Your general consumer rights operate
alongside, and in addition to, your rights under this Limited Warranty.
Claims may be made within any applicable provision within any of its
applicable time parameters. For products purchased in the U. S.
N OTE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Par t 15 of the FCC regulations. These limits are designed
to provide reasonable protection against harmful
inter ference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and if not installed and or used in accordance with
the instructions provided herein may cause harmful
inter ference to radio communications.
PAGE 23 OF 27
However, there is no guarantee that inter ference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
inter ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/ T V technician for help.
S P EC I F I C A B S O R P T I O N R AT E ( S A R )
C ER T I F I C AT I O N I N FO R M AT I O N
This device meets guidelines for exposure to radio waves. Your device
is a low-power radio transmitter and receiver. As recommended by
international guidelines, the device is designed not to exceed the limits
for exposure to radio waves. These guidelines were developed by the
independent scientific organization International Commission on NonIonizing Radiation Protection (ICNIRP) and include safety measures
designed to ensure safety for all users, regardless of age and health.
The Specific Absorption Rate (SAR) is the unit of measurement for the
amount of radio frequency energy absorbed by the body when using a
device. The SAR value is determined at the highest certified power level
in laboratory conditions, but the actual SAR level of the device when
being operated can be well below the value. This is because the device
is designed to use the minimum power required to reach the network
WARNING
C hanges or modifications to this product not expressly
approved by the par ty responsible for compliance could
void the user’s authority to operate the equipment.
FCC ID
The FCC ID for this device is contained in an electronic label. To access
the electronic FCC ID label
• Display the settings menu by holding the upper and middle buttons on
the watch for 5 seconds;
• From the settings menu, use the upper and lower buttons to navigate
to the FCC ID to display the FCC ID label.
INDUSTRY CANADA IC NO.
A N D S TAT E M E N T
C ER T I F I C AT I O N S TAT EM EN T
This device complies with Industry Canada license-exempt RSS
standards. Operation is subject to the following two conditions: (1) This
PAGE 24 OF 27
device may not cause harmful interference, and (2) this device must
accept any inter ference received, including inter ference that may cause
undesired operation.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio inter ference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d'un type et d'un
gain maximal (ou inf érieur) approuvé pour l'émetteur par Industrie
Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l'intention des autres utilisateurs, il faut choisir le type d'antenne et
son gain de sor te que la puissance isotrope rayonn ée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autoris é e aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
EXPOSURE OF HUMANS
TO R F F I EL D S ( R S S -102)
Computers employ low gain integral antennas that do not emit RF
field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's Web site at
http://w w w.hc-sc.gc.ca/
The radiated energy from the antennas connected to the wireless
adapters conforms to the IC limit of the RF exposure requirement
regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using
recommended operating positions accepted by the FCC/ RSS with
the device transmitting at its highest certified power level in all tested
frequency band without distance attaching away from the body. Noncompliance with the above restrictions may result in violation of FCC/IC
RF exposure guidelines.
CO N FO R M I T É D E S A P PA R E I L S
D E R A D I O CO M M U N I C AT I O N AUX
L I M I T E S D ' E X P O S I T I O N H U M A I N E AUX
R A D I O F R ÉQ U EN C E S (C N R -102)
L'ordinateur utilise des antennes intégrales à faible gain qui
n'émettent pas un champ électromagnétique supérieur aux normes
imposées par Santé Canada pour la population. Consultez le Code de
PAGE 25 OF 27
sécurité 6 sur le site Internet de Santé Canada à l'adresse suivante:
http://w w w.hc-sc.gc.ca/
L'énergie émise par les antennes reliées
aux cartes sans fil respecte la limite d'exposition aux radiofréquences
telle que définie par Industrie Canada dans la clause 4.1 du document
CNR-102, version 5. Tests DAS sont effectués en utilisant les positions
recommandées par la FCC/CNR avec le téléphone émet à la puissance
certifiée maximale dans toutes les bandes de fréquences testées sans
distance attacher loin du corps. Non-respect des restrictions ci-dessus
peut entraîner une violation des directives de la FCC/CNR.
I C N U M B ER
The IC number for this device is contained in an electronic label. To
access the electronic IC number
• Hold the upper and middle buttons on the watch for 5 seconds to
display the settings menu;
• From the settings menu, use the upper and lower buttons to navigate
to the IC number to display the IC number label.
N U M ÉR O D E L' I C
Le nombre d'IC pour ce périphérique est contenu dans une étiquette
électronique. Pour le numéro IC électronique d'accès
• Maintenez les boutons haut et du milieu sur la montre pendant 5
secondes afficher le menu de paramètres ;
• Dans le menu de paramètres, utilisez les boutons supérieurs et
inférieurs pour naviguer vers le numéro IC pour afficher l'étiquette
numéro IC
R ECYCLING
Unwanted electrical equipment is the fastest growing t ype of waste
and in many countries it is your responsibilit y to properly and
responsibly dispose of electrical equipment waste (“ W EEE” ) including
lithium-ion bat teries.
Please do not throw this Vector product or any electrical equipment,
especially those marked with the crossed out wheeled bin symbol
in your local waste or garbage collection. Many electrical items can be
repaired or recycled which saves natural resources and the environment
and these products and their batteries should not be disposed of with
household waste. IF you do not recycle, electronic equipment will
end up in landfill where hazardous substances may leak out and cause
contamination that could be harmful to human health and wildlife.
Vector labels its products with a crossed out wheeled bin symbol
to
remind consumers that old electrical equipment can be recycled and
should not be disposed of with household waste. In addition, we are
pleased to offer our customers the chance to recycle their old electrical
items free of charge when purchasing a new item from Vector. Please
PAGE 26 OF 27
speak to the retailer where you purchased your product for details on
how to dispose of your WEEE in store or visit w w w.vectorwatch.com/returns
for details on Vector’s WEEE collection scheme in your region.
The symbol above means that according to local laws and regulations
your product and/or its batter y shall be disposed of separately
from household waste. When this product reaches its end of life,
take it to a collection point designated by local authorities or visit
w w w.vectorwatch.com/returns for information about Vector’s recycling
collection points. The separate collection and recycling of your product
and/or its batter y at the time of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects
human health and the environment.
SERVICE AND WARR ANT Y
Please visit w w w.vectorwatch.com/returns for details on service and or
making warranty claims. Service or repairs performed by anyone other
than Vector approved and authorized service providers will void the
product warranty. Damage resulting from the installation or removal of
any parts, to include batteries, by any unauthorized service provider will
not be covered under Vector’s warranty.
Vector is proud to offer a limited warranty on the material and
workmanship of its products. Please visit ww w.vectorwatch.com/warranty
for more details on Vector’s Limited Warranty applicable to this product.
This user guide is published by Vector Watch U K Limited (“ Vector”)
without any warranty, express or implied, including but not limited to
the implied warranties or conditions of merchantability and fitness for
a par ticular purpose. Improvements, modifications or changes of any
kind necessitated by typographical errors, inaccuracies of current
information, or improvements to programs and or equipment may be
made by Vector at any time and without notice.
All product and company names mentioned or referenced herein are the
trademarks, trade names, or registered trademarks of their respective
owners and all other trademarks are property of their respective owners
and any rights not expressly granted herein are reserved.
Some services and features described in this user guide may not apply
to your product model and some features may not be supported in all
countries and regions.
U N D E R N O C I R C U M S TA N C E S I S V E C T O R , I T S S U P P L I E R S ,
RESELLERS, OR SERVICE PROVIDERS LIABLE FOR ANY OF
THE FOLLOWING EVEN IF INFORMED OF THEIR POSSIBILIT Y:
1) T H I R D PA R T Y C L A I M S AG A I N S T YO U F O R D A M AG E S ;
2) L O S S O F, O R D A M A G E T O , YO U R D ATA O R C O N N E C T E D
P R O D UC T S; O R 3) S P EC I A L , I N C I D E N TA L , O R I N D I R EC T
DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL
DAMAGES, INCLUDING LOST PROFITS, BUSINESS REVENUE,
G O O D W I L L , O R A N T I C I PAT E D S AV I N G S .
PAGE 27 OF 27