IP Cam Viewer App Setup

Transcription

IP Cam Viewer App Setup
ion NVR
IPCAM VIEWER APP
SETUP
*IPCam Viewer App
*Apple and Andriod both have this free app
**Apple will be used in this setup.
*Please note that for
this to work, you must
have already gone
through the process of
networking and port
forwarding your NVR
Go to the App Store (Apple) or Play
Store (Android) and search for
IP Cam Viewer Lite and download it.
Once it has finished downloading and
installing, open the app.
2
(Cell Phone App Setup cont.)
After you select Manage Cameras it
will show you the two demo cameras,
tap edit in the upper right and delete
them both.
When first opened there will be 2 demo cameras
on the screen you will need to delete those. Tap
on the icon in the bottom right corner.
When you tap the
icon the menu screen
will pop up select
“Manage Cameras”
Now you are ready to add a camera.
Tap “Add Camera” bottom right
corner. Make sure the camera type is
as shown above.
3
(Cell Phone App Setup cont.)
rtsp://public ip :1024/user=admin&password=&channel=1&stream=1.sdp?
**The URL has to be
typed as shown but be
sure and replace the IP
address with your public
IP address. To find that
please go to,
ipchicken.com from a
computer connected to
your network.
Also, in the URL where you
see “channel=1” for every
camera you set up you
change the number
accordingly. Example: if you
are setting up channel 2
change the 1 to a 2.
*If you add a password to
your NVR you will need to
add that to the URL after
“password=”. By default the NVR has no password. Once you have the
information entered correctly tap test to test the connection.
**Be Sure to switch your phone to 3G or 4G while
using your Public IP Address
4
(Cell Phone App Setup cont.)
If you see your cameras
picture then the
connection was a success.
However if you see a grey
screen tap “More
Options” then turn on
“Prefer quality over
speed”.
Once you have successfully
added one camera you may
repeat the prccess to add all
of you cameras.
5