the program
Transcription
the program
Thermal Spray Centre (CPT) c/ Martí i Franquès 1. Barcelona 08028. España, T: +34 934021302; www.cptub.com; e mail: [email protected] Thermal Spray Centre (CPT) ORGANIZERS rd 3 COLD GAS SPRAY Summer School 3rd - 4th June, 2015 BARCELONA / Spain CPT is member of: Thermal Spray Centre 3rd Summer School – 3rd - 4th June 2015 Objective The objective of this course is to introduce the recipe of the emerging Cold Gas Spraying (CGS) technology for protecting and enhancing surfaces of industrial products. The principal attribute of this novel technique lies in its capability of producing tailor made properties of coatings by optimizing the performance of the substrate, the material to be deposited and the process design parameters for a multiplicity of industrial applications. An interactive session based on real-life case studies and demonstrators will illustrate the potential of Cold Gas Spray (CGS) process and focus on the problems and future challenges of the Thermal Spray technology in today’s competitive world. Who Should Attend? Scientists, engineers, techno-entrepreneurs, product developers and design engineers, product marketers, lecturers, managers and students who are interested to know the recipe of CGS for protecting and enhancing product surfaces for diverse applications. The target is to have a maximum of 30 people attending the Summer School. What is included? The course fee includes: • Printed course materials • Course certificate • 3 hotel nights (2,3 and 4th June) • 2 days lunch • Formal summer school dinner (3th June) • Transport from hotel to summer school location • Special cost for the Innovation Workshop participation Course fee: 1.100,00-€+ VAT If you are interested in join the 3rd CGS Summer School and Innovation Workshop contact @ Dr. Irene Garcia Cano by email: [email protected] Thermal SpraySpray Centre Centre Thermal 3rd Summer School – 3rd - 4th June 2015 Centre de Projecció Tèrmica Tentative programme Course Outline Introduction Basic background and evolution of CGS ; Fundamentals and Technology Key Definitions Fundamentals of Solid State Coatings and Surface Mechanics Introduction; Interfaces and stabilities in solid state; Surface temperatures in moving bodies; Stress and deformation fields in half-space and layered elastic media; Thermoplasticity and viscoplasticity; Perfect plasticity; Rough surfaces. CGS Fundamentals and Operational Parameters Particle velocity; Spray distance; Feeding rate; Spray angle; Temperature; Substrate CGS Processes and Equipment Low Pressure Cold Gas Process and Equipment; High Pressure Cold Gas Process and Equipment; Gas influence and selection CGS Feedstocks/Materials and Quality Control Classification of TS feedstocks/ Materials; Microstructural aspects of TSCs; Feedstock attributes; Selection of feedstocks/materials for TS processes Testing and Quality Control for CGS Coatings Metallographic preparation and structure characterization; Mechanical tests; Corrosion tests; Wear test; International standards for testing; Significance of testing standards Applications of CGS Processes Case histories and process economics; Case histories: Corrosion, electronics, rebuilding, niche applications; Control; Cost assessment of CGS processes and equipment Thermal Spray Centre Centro de Proyección Térmica Invited Speakers Prof. J. M. Guilemany Course Director. Thermal Spray Centre (CPT), SPAIN Prof. L. Pawlowski President of ETSA. University of Limoges (SPCTS)., FRANCE Prof. H. Kreye Helmut-Schmidt-University., GERMANY Dr. A. Concustell Thermal Spray Centre (CPT), SPAIN Dr. N. Cinca Thermal Spray Centre (CPT), SPAIN Dr. H. Assadi Helmut-Schmidt-University, GERMANY Dr. S. Dosta Thermal Spray Centre (CPT), SPAIN Dr. F. Gärtner Helmut-Schmidt-University, GERMANY Prof. T. Klassen Helmut-Schmidt-University, GERMANY Dr. S. Iliescu Thermal Spray Centre (CPT), SPAIN Prof. P. Vuoristo Tampere University of Technology (TUT), FINLAND Dipl. -Ing. J. Putzier Putzier Oberflächentechnik GmbH, GERMANY Mr. Guido Plicht Air Products, Germany, sponsor Mr. Peter Richter Jr. Impact Innovations, Germany, co-sponsor Mr. H. Fukanuma Plasma Giken, Japan, co-sponsor Mr. Klaas Rozema Dycomet, Netherlands, co-sponsor Dr. I. Garcia-Cano Course coordinator. Thermal Spray Centre (CPT), SPAIN Thermal Spray Centre Centre de Projecció Tèrmica Timetable Tuesday 2nd June 20:00 Welcome and Registration. HOTEL Wednesday 3rd June 9:00 Session 1 Welcome Address. Prof. J.M. Guilemany & Prof. L. Pawlowski Basic Background and Evolution 9:15 Cold Gas Spray - past and present. Prof. H. Kreye 10:00 Cold Gas Spray against conventional Thermal Spray Processes. Prof. J.M. Guilemany 10:45 Coffee Break Session 2 From the feedstocks to the coatings 11:15 Basic Coating Formation. Dr. N.Cinca 12:00 Design, Parameter control and coatings performance. Dr. S. Dosta 12:45 CGS Gases & Supplying Device, Air Products, Dipl. Eng. G. Plicht 13:30 Lunch Session 3 CGS Modelling and coating built-up 15:00 “Process Optimization by Modeling of In-Flight and Impact Behavior of Particles” Prof. H. Assadi 15:45 Features of Coating Build- up in CGS. Dr. A.Concustell Thermal Spray Centre Centro de Proyección Térmica Timetable Session 4: Testing and Quality Control for CGS Coatings 16:30 CGS Coatings Structural & Properties Characterization. Prof. L. Pawlowski 17:15 Assessment of CGS coating qualities. Dr. F. Gärtner 18:00 Close 20:30 Formal Summer School Dinner Thursday 4th June Session 5: Applications of CGS Processes 09:00 Selected Application Examples and Performance of Cold Spray Coatings, Prof. T. Klassen 09:45 CGS High Performance Coatings, Dr. S. Dosta 10:30 Coffee Break Session 6: Equipments & Case Studies 11:00 CGS Low Pressure, DYCOMET, Dipl.-Ing. K. Rozema 11:30 CGS Low Pressure Case Studies on Industrial Sectors, Prof. P. Vuoristo 12:00 CGS High Pressure: Equipment & Performance, IMPACT INNOVATIONS, Mr. P. Richter Jr. 12:30 CGS High Pressure: Equipment & Performance , PLASMA GIKEN, Mr. H. Fukanuma 13.00 CGS High Pressure Case Studies on Industrial Sectors, Dipl.-Ing. J. Putzier 13:30 Lunch Thermal Spray Centre Centro de Proyección Térmica Timetable Session 7: Economics & New Trends 15:00 CGS Economics, Dr. S. Iliescu 15:45 New Developments and Tendencies in Cold Gas Spraying, Prof. T. Klassen Session 8: 16:30 Practical - Technical Work Software: Tutorial Computer Aid Optimization for CGS parameters, Prof. T. Klassen & Prof. F. Gärtner 17:15 Understanding CGS Coatings on Different Substrates, Dr. S. Dosta 18:30 Concluding Remarks, Diploma & Summer Course Close Session Sponsored by: Co-sponsored by: Thermal SpraySpray Centre Centre Thermal 3rd Summer School – 3rd - 4th June 2015 Centro de Proyección Térmica LOCATION Finca Pedro Pons (Vallvidrera Avenue, 25) The Agustí Pedro i Pons University Foundation was declared its universal heir by the Most Excellent Dr. Agustín Pedro Pons in his last will and testament on September 9, 1960. In this will he bequeathed the Vallvidrera de Can Mestres’ Property, located in Av. Vallvidrera, 25-29, to the University of Barcelona. The masía (traditional catalan farmhouse) of Can Mestres is wellknown by many passers-by thanks to its sgraffito, which were probably added to the house built in the 18th Century on the site of another 16th-Century farmhouse. The sgraffito take up the north and south facades, and one of them boasts a sun dial which dates from 1776, which could be when the sgraffito were made. The masía were restored in 1960, and once again in 2000, offering an ensemble with a quality similar to those still left in the Sarrià area. On the upper roof, the weather cock features a patufet*. It was made of iron, with very strong gears, and has been working for more than 50 years. While the whole unit may seem bulky, it moves very fast on windy days. Pedro Pons building How to arrive? The organization will provide transport support to all the participants from the hotel to the summer school location and back. Thermal Spray Centre Centro de Proyección Térmica REGISTRATION 3rd Cold Gas Spray Summer School Innovation Workshop I would like to register the following persons for the Participant data Name and surname: Profession: Place of work: E-mail: Telephone: Fax: How did you recieve the information about the CGS summer school? Email Internet Personal recommendation Others:………………………………………………… Organization data Organization: Address: Zip code: Country: Others Payment 3rd CGS Summer school : Payment Innovation Workshop: Payment 3rd CGS Summer school +Innovation Workshop: 1.100€+VAT 300€+VAT 1.300,00€+VAT Bank transfer Name: Fundació Bosch i Gimpera – UB Vat number : ESG08906653 Bank Code: CESCESBBXXX IBAN Code: ES7320130088630200326711 Indicate the organization name and the participant with the Reference: CGS Summer School 2015 Please, send the registration sheet and a copy of the transfer to [email protected] or by Fax: +34934021297 Co-sponsored by: