DIESEL PILE HAMMERS Operating Instructions
Transcription
DIESEL PILE HAMMERS Operating Instructions
DIESEL PILE HAMMERS Operating Instructions APE - American Piledriving Equipment, INC. 7032 South 196th St. Kent, WA 98032 USA (800) 248-8498 (253) 872-0141 www.apevibro.com Contents 01 02 04 05 06 07 08 10 11 12 13 14 16 17 18 19 20 26 27 Contents Technical data Major components Working principle Trip gear Diesel pile hammer Transport instructions Transport protection Guide of pile helmet Fitting to lead Batter piling Lubricating instructions Starting - adjusting - stopping Instructions for adjusting of variable-delivery fuel pumps Instructions for pile driving Taking hammer out of operation Trouble shooting Mainenance Safety regulations Screw or bolt tightening torques 1 Technical data Not all figures are exactly in accordance with the equipment supplied. However, this has no influence to the function. Please bear in mind: We cannot take over any guarantee for pile helmet and pile plate including cushion. 2 Major components A A1 A2 A3 A4 A5 Trip gear Guide gibs Lever Sliding cam Pawl Pawl lever 01 1.1 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Cylinder upper part Upper cylinder extension Suspension plates Fuel tank (lube oil tank and either tank built-in) Transport eyes Carrier (on both sides) Lube oil lines Connecting srews Catch for pawl lever Lube oil pump Fuel/breather line Variable delivery fuel pump Injection valve(s) Pump guard Cylinder lower part Locking screw Cylinder endring (two parts) Rubber ring (two parts) Impact block Plates to fit the guide tubes Stop for pawl lever Guide clamps Exhaust openings Catch groove Striking weight (piston) Catch piston ring Cylinder sleeve(s) Inner damping ring (two parts) 4 Working principle 5 Diesel pile hammer 6 Transport instructions 7 Transport protection 8 9 Guide of pile helmet 10 Fitting to lead 11 Batter pile 12 Lubricating instructions 13 Starting - adjusting - stopping 14 15 Instructions for adjustment of variable-delivery fuel pumps 16 Instructions for pile driving 17 Taking hammer out of operation 18 Trouble shooting 19 Maintenance 20 21 22 23 24 25 Safety regulations 26 Screw or bolt tightening torques 27 APE - American Piledriving Equipment, INC. 7032 South 196th St. Kent, WA 98032 USA (800) 248-8498 (253) 872-0141 www.apevibro.com