PDF

6000B
HEADS ABOVE THE COMPETITION
www.logmax.com
6000B
HARD-WEARING DESIGN
BASED ON DECADES OF IMPROVEMENTS
Log Max 6000B is built on well-proven
hydraulics with a maximum hydraulic
pressure of 260 bar (3 771 psi) and max flow
of 280 l/min (74 gpm).
DIMENSIONS
Height
21-25 t.
0
1
5
18-22 t.
10
15
20
2 3
25
170-210 kNm
30
35
40
45
METRIC
IMPERIAL
1 682 mm
66.2’’
1 299 kg
2,864 lbs
110 dB
110 dB
Two hydraulically driven rollers mounted on radial piston motors
857cc or 934 cc.
52.3 cu.in or 56.7 cu.in
Feed force std/opt
26,9 kN/29,3 kN
6,047/6,857 lbf
4,2/3,9 m/sec
13.8/12.8 fps
625 mm
24.6’’
up to 82 cm / cut up to 72 cm
up to 32.3’’ / cut up to 28.3’’
Weight (incl. feed rollers and damped protection plate)
in
The feed rollers always work perpendicular
to the tree which has for benefit to minimize
friction losses and roller penetration.
This geometry also ensures accurate length
measuring for high quality timber.
Sound effect*
FEEDING
Most productive range
1. Min delimbing diameter
2. Max cutting diameter, std
3. Max cutting diameter, opt
Feed roller options
Steel, V-Steel, Eucalyptus
Optional equipment
Accumulation Kit, Auto Chain Tensioner,
Eucalyptus equipment, Fixed protection plate,
Field repair kit, Color marking, Hose Holder, Hydraulic
upper knife, Rotator control, Find end sensor, Snow cover
Feed speed std/opt
Maximum roller opening
CUTTING / DELIMBING
Bar lenght / Maximum cut capacity
Maximum full coverage delimbing diameter
Minimum hydraulics requirements for acceptable performance
CONTROL SYSTEM
500 mm
19.7’’
200 l/min
52.8 gpm
MAXI / DASA4 / MOTOMIT / TM300 / Log Mate 402 / CabsWin
*This value is measured according to EN ISO 3744:2009 with an accuracy of ±2 dB (A) under publication EA-4/16:2003. The value is measured when the saw cuts with maximum speed without any load.
Log Max AB - Stationsvägen 12 - 770 13 Grangärde - Sweden / Tel: +46 240 59 11 00 Fax: +46 240 59 11 10 - www.logmax.com
TJ-2011-05-001 - Specifications may vary depending on equipment selected .We reserve the right to make changes in product specifications without prior notice.
Log Max 6000 is a light-weight head suitable
for final felling. Combining low weight with
high power it is especially designed for large
wheeled carriers.