Neo Domus Trenčín

Neo Domus Trenčín
The ”Neo Domus” association was established in 1991 as an architectonic atelier.
According to market requirements, the atelier grew up relatively fast to a complexly
understood project and architectonic atelier of a present form.
Since the very beginning of its activity, the project atelier has been oriented on the
work with full use of CAD systems not only in a certain moment of project practice
but also in its whole scale. During our activity, we have prepared many projects
according to which these buildings were also realised successfully.
In 1997, our company was transformed into “Neo Domus l.t.d.” Compared to the
former association, this company expands both the operating range and the
spectrum of offered services of a project atelier and engineering services and is a
next logical step in development and expansion of the company.
Our staff structure is based on the needs of an architectonic atelier, however, clearly
aimed at getting a project to an implementation part up to the author’s inspection
during implementation including complex provision of project and engineering work.
At present, the key staff of the project atelier consists of 20 internal employees,
including 4 architects and one external cooperating architect ( 3 of internal are
authorised), 11 civil engineering designers (out of which 4 are authorised - certificate
of competence), 4 structural engineers ( 3 of them are authorised ) an one civil
engineer authorised as a roads designer. Other specialists are covered by the scope
of about 20 stable external subcontractors, who are holders of appropriate licences –
authorisations or certificates of competence. The aforementioned personnel cover the
whole range of project and engineering work as needed.
Performance of NEO DOMUS in the real estate is focused on the following areas:
Planning
Civic amenities
Industrial construction
Residential construction
Complex engineering services
Consultancy
Most of our work has been done and is also being done at present for foreign investors or for
investors with foreign participation. Out of these investors, some come back again to cooperate
with us in further investment activities.
Especially preparation of project documentation using CAD systems, spatial modelling of civil
structures and interiors and photo-realistic presentation of models of structures – visualisations and
animations are predominant features in our work. We consider the designing technical support be
a tool to achieve standard European and worldwide level of designing.
Company Management Personnel Structure
Ing. arch. Peter GUGA,
GUGA, authorised architect, – executive of company,
company, general manager, 30 years of
experience, architecture, urbanism, interiors, design, acquisition
acquisition and engineering work, author’
author’s inspection.
inspection.
Ing. Juraj GALVÁ
GALVÁNEK,
NEK, authorised engineer, 33
33 years of experience, postgraduate education in constructional
physics, chief engineer – coordination of professions, engineering work, performance of author
author’’s inspection
Ing. Irina JAKUŠ
JAKUŠOVÁ
OVÁ, authorised engineer, 31 years of experience, postgraduate education in constructional
physics and vegetation roofs, a structural part, CAD – chief designer of a structural part
Ing. Mariá
Marián MOŠ
MOŠAŤ, authorised engineer, 31 years of experience, postgraduate education in concrete structures,
structures,
structural analysis icl.
.
Dynamic
anlyses,
,
CAD
–
technical
director
of
the
company.
icl
anlyses
Ing. Juraj ŠINKA,
,
authorised
engineer, 29 years of experience, postgraduate education in geoINKA
geo-technical
engineering, structural analysis, CAD, engineering work – executive of company,
company, a surveyor in the area of civil
engineering / structural analysis and defects of structures
Industrial Buildings
YAZAKI DEBNAR SLOVAKIA – production factory, costs for constructional part SKK 230 mil, implemented 1996
SAMSONITE Slovakia s.r.o. Šamorín – reconstruction and annex of a production factory 1999,
costs SKK 100 mil, implemented 2000, Logistic warehouse 2003
Industrial Buildings
BRANSON Nové Mesto n. Váhom, new production factory, SKK 350 mil, Planing 1999 - 2000,
implemented 2000 – 2001
STEAG Elektronic systems Nové Mesto n/V, production factory, investment costs SKK 120 mil,
implementation finished in 07.2001
Industrial Buildings
Production Plant EUROPIN Ltd. Trenčín - planning and building permit in 2006, built 2006-2007
Production Plant HEIDELBERG POSTPRESS Ltd. Nove Mesto n/V planning and building permit
in 2006, built 2006-2007
Industrial Buildings
JOHNSON CONTROLS International – Design Centrum Trenč
Trenčin - building permit in 2005, built 2006
2006 – 2009
2009
Production Plant FREUDENBERG Ltd. Potvorice - planning 2006 -2007, built 2008
Logistic
Logistic Centrum Nove Mesto / IMMOFINANZ / - planning 2007 - building 2007 - 2008,
Commercial / Shopping
Hypermarket TESCO Trenčín – shop area 7,000 m2, finished in 2003
Commercial / Shopping
Hypermarket TESCO Šaľa –3,000 m2, Planing 2003 Finished 2003
Hypermarket TESCO Nové Mesto n.Váhom – shop area 3,000 m2 - Planing 2003 - Realisation 2004
Commercial / Shopping
Hypermarket TESCO Krupina – shop area 1,000 m2, built 2007
Hypermarket TESCO Rajec – shop area 1,000 m2, „GREEN PROJECT“ Planing 2007 Built 2008
Commercial / Shopping
Hypermarket TESCO Zvolen – shop area 4,000 m2, Planing 2010, Built 2010
Hypermarket TESCO Myjava – shop area 3,000 m2, Planing 2010, Built 2010
Commercial / Shopping
Shoping Park Laugaricio Trenčín – shop area 12,000 m2, Planing 2006-2007 Built 2008
Shopingcentrum
Shopingcentrum STOP SHOP Púchov – shop area 5,000 m2, planing / built 2008