Upenders UE - Advance Lifts

U penders (Ue)
10 Year/250,000 Cycle Warranty
These units are tilters that tilt a full ninety (90) degrees. It is common to equip
one platform with a “V” cradle to hold coils or rolls. When this is done we leave
a gap of 6”, or whatever the customer specifies, to accommodate a pallet at
the bottom face of the coil or roll. The upender is then called a roll “palletizer”
or “depalletizer”. Lifts have been mounted on one of the platforms and so have
turntables. If a turntable is mounted, it usually has to be mounted on slides so
that it can be pulled away from the adjacent perpendicular face in order to turn
a square cornered load.
S PECIAL F EATURES
4
4
4
4
4
All models have hydraulic return lines on the cylinders to preclude oil weepage.
All of the controllers are Underwriter Laboratory listed assemblies.
All shafts, axles and pins are hard chrome plated.
All bearings are lifetime lubricated.
These units are fully primed and finished with baked enamel.
S PECIFICATION TABLE
FOR
U PENDERS
Model
Capacity
Lbs.
Tilt
Degrees
Lowered
Height
Platform
Widths
Platform
Lengths
Tilt
Speed
H.P.
Approx.
Weight
UE-290
UE-490
UE-690
UE-890
UE-1090
2000
4000
6000
8000
10000
90
90
90
90
90
12
12
12
14
16
48 - 60
48 - 60
48 - 60
48 - 60
48 - 60
54 - 72
54 - 72
54 - 72
54 - 72
54 - 72
58
58
86
91
124
5
5
5
5
5
2000
2200
2500
4000
4300
The table represents our most common
sizes. The size and configuration
possibilities are simply too numerous to
list them all. If you do not see the size
you need, please call the factory and we
will gladly quote on your exact size and
feature requirements.
Phone: 800-843-3625 • Fax: 630-584-9405 • www.advancelifts.com
©2013 Advance Lifts, Inc. All rights reserved.
1A5E1p
These units lend themselves to many special applications and many modifications.
The following photos illustrate some of the modifications we have applied to these units.
Upender with “V” cradle
Hydraulically adjustable “V” cradle
Upender with deep “V” cradle
& powered conveyor flat deck
Whatever your needs are, we have the expertise to design a suitable unit.
Phone: 800-843-3625 • Fax: 630-584-9405 • www.advancelifts.com
©2013 Advance Lifts, Inc. All rights reserved.
1A5E1p