Attached file - Tacticalstore

Instruction Manual
Address
Taipei / 11F-3,NO.27,Lane 169,Kangning St,Shijr City,Taipei County 22180,TAIWAN
Changhua / 1F,NO.552,Hegang Rd,Hemei Township,Changhua County 50844,TAIWAN
E-Mail
Sales Department / [email protected]
[email protected]
Technology support Department / [email protected]
Website
www.guay2.com
Tel.
Taipei / 886-2-2692-2000
Changhua / 886-4-757-7000
Fax
Taipei / 886-2-2692-4000
Changhua / 886-4-757-8000
Instruction Manual
100% Made in Taiwan www.guay2.com
Manufactured by G&G ARMAMENT
1
Introduction
Contents
Charging handle
Adjustable rear sight
Introduction
G&G is constantly researching new ways to innovate in designs and
01
Introduction
02
Components
are designed and build with computer assisted design tools such as
03
Warning
Computer Numerical Control (CNC) turning operation to ensure tight
05
Selector and safety setting
06
Installing battery
G&G values the customer's feedback, as we incorporate improvements
07
Sight adjustment
and upgrade to our future products. All G&G products are proudly made
Stock folding
Front sight
For more product information
please visit our website
www.guay2.com
Mock suppressor
for UMG
Ouick detachable(optional)
materials to ensure the best quality of our products. All G&G products
Stock lock
Bolt catch
precision and quality.
Bolt
Safety / Fire selector
Scope mount rail
Side rail
Grip
in Taiwan.
Outer barrel
08
Hop-up adjustment
It is G&G vision that our customer can enjoy the best experience using
09
Setting magazine
our product, and we strife in delivering the best quality product as the key
10
Movable parts
11
Maintenance
12
Trouble clinic
13
Parts list
Lower rail
to our success. G&G has focused on developments of Automatic Electric
Magazine
70 rounds(standard)
530 rounds(optional)
Guns with inimitable characteristics. G&G is proud to present its one of
the kind, UMG.
For more inquiries or information on our product and service, as well as
any questions or feedbacks, please refer to our website www.guay2.com.
Folding stock
Trigger
Magazine catch
For more product information please visit our website
www.guay2.com
2
Components
3
Warning
Never direct the muzzle
towards a person or animal in
any direction.That may cause
harm or damage to the third
party.
Make sure to put the barrel
and safety cap on the
muzzle,except when you are
shooting.Do this to prevent
accident,discharge of BB’s
and also for dust protection
purpose.Never pull the
trigger while the barrel and
the safety cap is attached.
When you carry the air
gun,attach the safety cap,set
the selector lever to the safety
position and always put the air
gun in a case or bag.
Looking into the muzzle is
extremely dangerous
regardless of BB’s having
been loaded or not.If you
get hit in the eye by a BB
pellet, you may in worst
case, lose your eye sight.
Activating the trigger
carelessly is extremely
dangerous. Never put your
finger on the trigger
unless the safety cap is
removed and you are
ready to shoot a target.
Safety procedures:
1.Attach the safety cap to the
muzzle.
2.Set the selector lever to the
safety position.
3.Remove the magazine.
4.Remove the battery.
Select a safe place for
operating the air gun,avoid
places where people and cars
are around.
There may be cases where
some BB’s remain in the gun
after the magazine has been
removed.After removal of the
magazine,direct the muzzle
towards a safe direction and
pull the trigger to confirm that
there are no BB’s remain in the
gun,then attach the safety cap.
Disassembling or modifying the
gun may adversely affect the
performance and cause of
danger. “ It may be against the
Law.”
When shooting the air guns for
target practice or in a game
situation, you and all participants
must wear safety goggles or
other eye protective gear.
Also,pay attention to ricochets. It
is very important to pay attention
to third parties other than the
participants.
Always attach the safety cap
to the muzzle,remove the
battery and store the air gun
in a case or bag and at a
place that is out of reach by
children.
Orange tip disclaimer：
All products employ high precision 6.04mm barrel. Use with
precision 5.95mm BB pellets is highly recommended.
Damage to the product due by faulty BB pellets voids the warranty.
Use with caution.
You may be liable for damaging
public, personal property ,
injuring a person or animal even
if you are meant to shoot as a
“practical joke.” Always observe
good manners and enjoy fun
sport shooting.
All G&G Airsoft products came with a permanent fixed orange tip
required by law, which will grant Airsoft legal usage in the United States
and complied with the United States laws.
If you alter, remove the orange tip or the item is modified or abused, all
warranty will be void.
For more product information
please visit our website
www.guay2.com
Adult supervision required.
May be hazardous up to 50 meters.
Read all instructions before using this product.
Always wear safety goggles when using this product.
Misuse or careless handling of this product may cause injury.
This product is intended for users 18 years or older.
The buyer and the user of this product shall adhere to all local
laws regulating the usage and the ownership of airsoft guns.
4
Warning
5
Selector and safety setting
Warning
For more product information
please visit our website
www.guay2.com
Installing battery
► Use only the G&G battery purchased from your local dealer.
1
2
3
Warning
► Never operate the selector while pulling the trigger.
Otherwise, malfunctions may occur.
► Pulling the trigger with the selector being set at safe mode may damage the airsoft gun.
Always set the safety mode immediately after firing.
To fold the stock.
Opening the battery cover.
4
Safety setting mode
Semi mode
The trigger can not be pulled
Single shot
When you are not firing the gun or during
storage.
Always set the selector to the safe position
and attach the protective cap on the
muzzle.
The gun will be fired one shot each time
when pulling the trigger.
5
Fully automatic mode
Automatic firing
Connect the connectors then insert into
the receiver.
To insert the battery into the receiver.
Reinstall the battery cover.
► Please select quality battery with the CE approval,
to avoid any un-necessary damage on your product.
► It is strongly recommended the use of G&G UMG type
Ni-CD 9.6V 1100 mAh rechargeable battery only.
The gun will be fired automatically while
the trigger remains being pulled.
For more product information
please visit our website
www.guay2.com
6
Installing battery
7 Sight adjustment / Stock folding
For more product information
please visit our website
www.guay2.com
Hop-up adjustment
Warning
► Do not catch your fingers in the dummy bolt.
Rear sight adjustment
1
2
3
Normal
Precision shooting
Common shooting
Pull the charging handle backward and
lock to open the bolt.
At the same time the bolt cover will open.
Turning the screw will move the pellet
hitting point to the left or right.
Height adjustment screw：
To lift or lower the rear sight.
Too much hop-up ( Return the lever toward Normal ).
Hop
Sliding the Hop-up adjustment piece foward
or backward to adjust the Hop-up effect.
Warning ► Never hold the gun sideways as
the BB pellets will curve right or left.
► This is due to the HOP-UP system.
Stock folding
1
2
Pull up
3
Direction.
Not enough hop-up ( Move the lever toward HOP ).
or too much hop-up ( Return the lever toward Normal ).
Press the stock lock.
Folding the stock to the right side.
Pulling the stock up to catch the hook.
8
Hop-up adjustment
9
Setting magazine
Warning
1
Top view
1
Connect the BB charger muzzle
to the top of the magazine.
Load G&G 5.95mm BB pellets
into the BB charger.
Open the cover on the top of the
magazine.
Push the BB pellet into the
magazine with the charging rod.
Insert outer barrel into the suppressor.
3
2
Load G&G 5.95mm BB pellets
into the magazine.
3
2
1
Click
Bottom view
Click
2
3
2
1
530 Rounds magazine
Installing suppressor
► It is strongly recommended the use of G&G suppressor only.
Bottom view
70 Rounds magazine
Top view
Warning
► Confirm that the safety lever is set to safety position and do not place your finger on the trigger.
► Always use the G&G BB pellet or diameter 5.94 ~ 5.96 mm BBs for this air gun.
► G&G shall not be held responsible for any damage or accidents arising from the use of pellets
supplied by other manufacturers.
Uninstalling suppressor
To push and turn the suppressor until you
hear a click sound.
1
1. Press the button.
2. Pull the suppressor out.
2
3
After the BB pellets had been loaded.
Close cover and turn the gear on the
bottom until the sound changes.
1
2
3
Insert the magazine
into the body until
you hear a click
sound.
Press the magazine
catch to release.
Pull the magazine
out of receiver.
Pull the charging handle backward to open
the bolt cover.
Press the lower part of the bolt catch to fix
bolt cover.
Press the upper part of the bolt catch to
release the bolt cover.
For more product information
please visit our website
www.guay2.com
10
Movable parts
11
Maintenance
For more product information
please visit our website
www.guay2.com
Maintenance when pellets speed becomes low
1. Drop a few drops of silicone oil or teflon oil into the pellet entrance. After insert
BB pellets into the magazine, fire the gun for up to 200~300 pellets.
2. To complete the cleaning, use the cleaning rod ( with cotton ) to remove excess oil.
Warning
► Do not jam the cleaning rod into the barrel by force.
► Should the BB’s remains inside the barrel after following the instruction above,
with the protection cap over the barrel, point the gun to a safe direction, and discharge
any loosened BB’s in semi-automatic mode.
Removing clogged pellets
Warning
► Make sure no dirt gets into the chamber
to avoid clogging of pellets.
► Hop-up may be unstable for the first 200
to 300 rounds after using silicone oil, this is
the normal operation of the gun.
► Never use CRC-556, WD40 or other corrosive
lubricant.
1. Return the hop-up dial to the Normal position
and insert the cleaning rod from the lead edge
of the barrel.
2. To remove clogged BB’s, carefully insert the
cleaning rod inside the flat tip facing down
as shown below.
For more product information
please visit our website
www.guay2.com
12
Trouble clinic
Parts list
13
07
06
05
08
07
06
05
04
03
09
For more product information
please visit our website
www.guay2.com
04
05
1
-0
MG
U
04
03
-04
03
G
UM
02
01
01
23
02
04
05
9
-0
MG
U
UM
05
02
18
01
17
16
15
08
07
11
-07
01
14
G
UM
02
01
09
05
08
07
UM
11
13
12
UM
02
02
1
G-1
UM
02
01
01
02
05
04
04
10
UM
5
G-0
08
06
01
06
UMG-01
3
G-1
UM
03
02
05
02
04
07
01
09
10
05
03
04
07
03
2
G-0
6
G-1
02
03
03
03
08
06
03
02
-03
04
02
01
10
G
UM
02
UM
06
09
20
03
4
G-1
0
G-1
UM
02
8
G-0
UM
6
G-0
02
01
04
01
06
22
21
19
02
02
02
2
G-1
UM
UMG-11
Magazine
Bolt catch set
UMG-12
Hop-up set
UMG-07
Rear receiver cover set
UMG-13
Lower rail set
UMG-08
Upper receiver set
UMG-14
Front sight set
Mock bolt set
UMG-09
Rear sight set
UMG-15
Inner barrel set
Lower receiver set
UMG-10
Upper rail set
UMG-16
Outer barrel set
Folding stock set
UMG-06
UMG-02
Motor set
UMG-03
Gear box set
UMG-04
UMG-05
5
G-1
UM
14
Parts list