D A TASHE ET ~Castrot

D A TASHE ET
SAFETY
~ Castrot
1: IDENTIFICATION OF THE SUBSTANCF/PREPARATION AND OF THE
COMP ANYfUNDERTAKING
Name
Castro. Syntilo 25
Application:
Metal working fluid - Soluble
Company
Address
Telephone:
Aspac Oil Korea Limited
Code: 01-7126
4F, Yousung Bldg., 830-67, Yeoksam-Dong, Kangnam-Ku, Seoul, Korea.
82-2-557-9400
Fax: 82-2-557-5109
2 : COMPOSITION / INFORMATION ON INGREDIENTS
Composition: Aqueous solution of corrosion inhibitors and additives.
Ingredient(s)
CAS NO
Water Deionised
7732-18-5
< 60
Monoethanolamine
141-43-5
>30
10043-35-3
<15
Boric Acid
%
Others
<10
This product contains ingredients classified as hazardous. However, they are NOT present in sufficient
quantities
to warrant classifying the product as hazardous
All constituents
Substances)or
ofthis
ELINCS
product are listed in EINECS
(European
(European
List of New Chemical
Inventory
Substances)
of Existing
Commercial
Chemical
or are exempt.
Refer to Section 8 for Occupational Exposure Limits.
3 : HAZARDS IDENTIFICATION
This product is NOT classified as hazardous
4 : FIRST AID MEASURES
Eyes:
Irrigate immediately with copious quantities of water for several minutes.
Obtain medical attention if irritation persists.
Skin:
Wash thoroughly with soap and water or suitable skin cleanser as soon as
Possible. Obtain medical attention if dermatitis originates.
Inhalation:
Remove from exposure. Move to fresh air area
Ingestion:
Obtain medical attention urgently. Do NOT induce vomiting.
Wash out mouth with water
Issue No. 01
Date: 17/4/2001
Product Name: Syntilo 25
Code: 01-7126
Page:
lof4
5 : FIRE FIGHTING MEASURES
SuitableExtinguishingMedia:
Carbon dioxide, powder, foam or water fog.
SpecialExposureHazards:
Nitrogen compounds.
Special Protective Equipment:
Self-contained breathing apparatus
6 : ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Split product presents a significant slip hazard.
Environmental Precautions: Prevent entry into drains, sewers and water courses.
Decontamination Procedures: Soak up with inert absorbent or contain and remove by
best available means.
7. HANDLING
AND STORAGE
Handling: Avoid breathing spray mist. Aboid skin and eye contact. To avoid the possibility of skin
disorders, repeated or prolonged contact with products this type must be avoided. It is essential
to maintain a high standard of personal hygiene.
Storage:
Protect from frost. Store out of direct sunlight. Store between(.C): 5~40.
8 : EXPOSURE CONTROLS/ PERSONAL PROTECTION
Occupational Exposure Limits:
8 Hr.TWA
Substance
STEL
Source/Other Information
None
Engineering Control Measures:
Local exhaust ventilation is recommended. Mechanical
methods to minimize exposure must take precedence over
personal protective measures.
Personal Protective Equipment:
Safety
glasses.
Plastic
apron.
Wear
Impervious
gloves
(eg PVC) in case ofrepeted or prolonged contact.
Change contaminated clothing and clean before re-use.
9: PHYSICAL AND CHEMICAL
PROPERTIES
PhysicalState:
Colour:
Odour :
Liquid
Clear FluorescentGreen
Mild
pH(workingdilution):
9.5-10.3(5%)
Issue No. 01
Date: 17/4/200 I
Product Name: Syntilo 25
Code: 01-7126
Page: 2 of 4
Flash Point(closed, 'C):
Above 100
Autoignition('C):
Not determined
Relative Density (at 20'C) :
Water Solubility:
Fat Solubility:
Above 1.0
Soluble
Not determined
10 :STABILITY AND REACTIVITY
Stability :
Conditions to Avoid:
Stable. Hazardous Polymerisation will not occur.
Direct sunlight. TemperatureCC) above 40.
Materials to Avoid:
Strong oxidising agents. Strong acids
Hazardous Decomposition Product:
Nitrogen compounds
11 : TOXICOLOGICAL
INFORMATION
The following toxicological assessment is based on a knowledge of the toxicity of the product's
components. Not classified as an eye or skin irritant.
Health Effects
On Eyes:
May cause transient irritation
On Skin:
May defat the skin.
By Inhalation:
Mist and vapours may cause irritation to nose and respiratory tract
By Ingestion:
May cause nausea, vomiting and diarrhoea.
Chronic:
Repeated and prolonged skin contact may lead to skin disorders.
Other:
Not known.
12: ECOLOGICAL INFORMATION
Environmental Assessment:
environmentaleffectsare foreseen.
When used and disposed of as intended, no adverse
Mobility :
Mobile liquid. Soluble in water.
Persistence and Degradability :
Not readily biodegradable.
Bioaccumulative Potential:
Not bioaccumulative based on logP values of constituents
Ecotoxicity:
Not determined
13 : DISPOSAL CONSIDERATIONS
Disposal must be in accordance with local and national legislation.
Unused product:
Used/Contaminated
Issue No. 01
Dispose of through an authorised waste contractor to a licensed site
Product: Dispose of in an approved manner.
For further information see section 16.
Date: 17/4/2001
Product Name: Syntilo 25
Code: 01-7126
Page:
3 of 4
Packaging:
Must be disposed of through an authorised waste contractor.
May be steam cleaned and recycled.
14 : TRANSPORT INFORMATION
This product is NOT classified as dangerous for transport.
15: REGULATORY INFORMATION
Hazard Label Data:
-
This product is NOT classified as dangerous for supply in Korea.
EC Directives:
Waste Oil Directive, 87/10l/EEC
Framework Waste Directive, 91/156/EEC
Health & Safety at Work, etc. Act 1974
Consumer Protection Act 1987
Environmental Protection Act 1990
Waste Management. The Duty of Care
Metalworking fluids - heasth precautions(EH62)
Save you skin!- Occupational Contact Dermatitis [MS(B)6]
Dermatitis - cautionary notice [SHW 367]
Statutory Instuments :
Codes of Practice:
Guidance Notes:
16: OTHER INFORMATION
The data and advice given apply when the product is sold for the stated application or applications. The
product is not sold as suitable for any other application. Use of the product for applications other than as
stated in this sheet may give rise to risks not mentioned in this sheet. You should not use the product
other than for the stated application or applications without seeking advice from us.
If you have purchased the product for supply to a third party for use at work, it is your duty to take all
necessary steps to secure that any person handling or using the product is provided with the information
in this sheet.
If you are an employer, it is your duty to tell your employees and others who may be affected of any
hazards described in this sheet and of any precautions which should be taken.
Further copies of this Safety Data Sheet may be obtained from Aspac Oil Korea Limited.
Issue No. 01
Date: 17/4/2001
Product Name: Syntilo 25
Code: 01-7126
Page:
4 of 4