E318K WWL bro update05.indd - Kent

One of the most common reasons customers return vehicles to the
dealer or body shop is because of wind noise and water leak problems.
Kent Automotive has an easy, effective solution
to diagnose and fix wind and water leak problems.
Kent’s Wind, Water Leak Work Sheet
assists the customer in finding the problem by following the “who, what, where,
and when” problem solving method.
Kent’s Wind, Water Leak Product Guide
assists the technician in locating the
products needed for the specific repair.
It’s easy – just match the problem area
on the Work Sheet to the Product Guide!
Acrysol™
Special solvent formulation to quickly and easily remove adhesives, sealants,
waxes and other contaminants from automotive body work without damaging most paints, plastics or more fragile surfaces.*
Ideal for preparing surfaces prior to painting or adhesive bonding. Use for cleaning
up overspray, undercoating, rustproofing and removing grease and tar from fabrics
and carpeting. Also for removing adhesives, polishes, sealants/sealers, silicones and
Teflon® coatings. Dries fast and leaves no residue or odor. See catalog for bulk containers and dispensing equipment.
*Always test first.
• Ford Tox No. 043968
Description
24 Oz. Aerosol Can, 12/Case
1 Quart Can with Squirt Spout, 12/Case
Part No.
P60170
P20005
Pkg. Qty.
1
1
Leak Trace Powder
Aerosol formulation quickly and effectively
Locates leaks on weatherstrips around doors, trunks, hatches, sunroofs, fixed glass
and body seams. Helps pinpoint leaks around engine blocks, power steering units,
radiators and transmissions.
• Safe on painted surfaces, rubber and vinyl
• Special extension tube for
hard-to-reach areas
• No chlorinated solvents to
contaminate waste oil
2
Description
12 Oz. Aerosol Can, 12/Case
Part No.
P20165
Pkg. Qty.
1
High-Tech™ Clear
A problem-solving clear sealer, High-Tech adheres
to automotive paints and can be applied to wet or
dry surfaces.
Excellent for base coat/clearcoat systems, enamel, lacquer
and urethane paints, galvanized metal, aluminum, glass,
plastics and primers. Used for door skins, drip rails, tail
lights and trunk seams.
• Non-yellowing
• Will not crack, peel or shrink
• Mix with automotive paint to color match seams
• Smooth feathering for undetectable repairs
• Quick skin-over reduces dust pickup
• GM No. 9984532; Ford Tox No. 047175; No. 047174
Ultra-Stick™ Adhesives
High-strength adhesives for bonding virtually all
automotive materials, including rubber, aluminum,
steel, cloth, and vinyl.
Description
Part No. Pkg. Qty.
Pressure Pack, 6/Case
KT12421
1
5 Fl. Oz. Tube Grade, 12/Case
P10200
1
11 Fl. Oz. Cartridge Grade, 12/Case
P10195
1
16 Fl. Oz. Pump Grade, 12/Case
P10567
1
6 – 16 Fl. Oz. Can with
Applicator Pump
P6032
1
Tinting Kit, Includes Four Cans
and Applicator Pumps
P6031
1
12, 11 Fl. Oz. Cartridge
with Cartridge Gun No. 90520
P6119
1
Weatherstrip (tube) a no-drip, no-string formula. Use
clear version for painted areas, black for weatherstrip.
High-Strength, Clear (brush top can) is a no-drip contact adhesive for larger parts.
High-Strength (aerosol) incorporates an adjustable
spray nozzle. For light-duty applications.
Recommended for repairs to weatherstrips, carpeting,
decals, emblems, gaskets, headliners, hood pads, kick
panels, mouldings, trim panels, and upholstery.
*Bonds to wet or dry surfaces
Description
8 Fl. Oz. Brush-Top Can, 6/Case*
Black, 5 Fl. Oz. Squeeze Tube*
Clear, 5 Fl. Oz. Squeeze Tube*
16 Oz. Aerosol Can, 12/Case
Part No.
P10140
P10190
P10192
P10522
Pkg. Qty.
1
1
1
1
3
Super Bond™
Fast-curing clear gel cyanoacrylate adhesive for
bonding a wide variety of materials, including
rubber, metals, plastics and ceramics. Repair
parts in mere seconds.
Use for repairing rubber parts like door gaskets and
weatherstrips and plastic parts such as dashboards,
grilles and rear lights. Also suitable for making small
repairs to metal and ceramic components.
• Rapid cure in 5 to 60 seconds
• High viscosity prevents run-off
• Unique non-clog cap
• Controlled dispensing via one-drop nozzle
• Tensile strength of 3,600 PSI on steel
• Fills gaps up to 0.016" (0.4mm)
• Economical – use one drop per square inch
Description
10g Squeeze Bottle, 12/case
.5 Oz. (14.1 grams) Squeeze Bottle)
2 Oz. Activator Pump Spray
Auto Trim Kit
1 -.5 Oz. (14.1 grams) Super Bond
3 Individual Primers
Part No.
P10690
KT13429
KT13431
KT13430
Pkg. Qty.
1
1
1
1
• 12-month shelf life (unopened)
• Instant cure with activator
• Clear gel formula
• 100% solids – no VOCs
Spray Leak Chek™
Aerosol formula for quick and easy sealing of water and air
leaks in hard-to-reach areas.
Flow grade consistency seals seams deep inside body work. Ideal
for sealing leaks in cowls, firewalls, pillars, plenums, posts and other
inaccessible areas from outside the car with no disassembly. Also
recommended for wheel housings, trunk and other seams. Seals dust,
dirt, noise and water out of the passenger compartment
• Includes 12-inch extension tube
to reach inaccessible areas
• GM No. 9984533
• Ford Tox No. 047179
4
Description
24 Oz. Aerosol Can,
6/Case
12-Inch Extension Tube,
12/Order
Part No. Pkg. Qty.
P50087
1
P90175
1
Quick Seal™
Multi-purpose 100% solids non-sag polyurethane seam sealer for painted or primed
parts, steel, aluminum, galvanized and plastics such as TPO polypropylene and SMC
(sheet molding compound). Eliminates cracking, peeling and shrinking.
• Resealable screw-top cartridge accepts various applicators and nozzles
• GM No. 9984532, Ford Tox No. 157850; 156632
• Paintable immediately or any time after curing
• 100% solids – will not shrink or crack
• No sagging on vertical surfaces
• Bakeable in bodyshop paint bake ovens up to 200°F (93°C)
• Withstands intermittent temperature to 325°F (163°C) for ten minutes
Description
10.3 Fl. Oz. Neutral with 3” Nozzle, 12/Case
10.3 Fl. Oz. Black with 3“ Nozzle, 12/Case
Cap/Nozzle/Adapter Assortment
300 ml (10 Oz.) Sausage Pack, Neutral
300 ml (10 Oz.) Sausage Pack, Black
Part No.
Pkg. Qty.
P10552
P10556
P6350
KT13437*
KT13438*
1
1
1
1
1
*Must use sausage applicator KT13483
(manual) or KT13484 (pneumatic)
Seal-N-Calk™
Non-hardening, pliable caulking strips for general-purpose
automotive sealing and caulking.
Recommended for filling large cracks and joints, and sealing seams.
• Easy-to-use – presses in place
• Retains flexibility – will not crack, dry out or shrink
• Not affected by cold, heat or moisture
Description
Black, ¼” Dia., 72 ft/Box
Gray, ¼” Dia., 72 ft/Box
Part No.
P10310
P10315
Pkg. Qty.
1
1
Chassis Tape
Provides OEM performance in just a fraction of the time required for
conventional sealers, without the drying time of brushable sealers.
Use on floor seams, trunk seams and all hidden seams.
• Matches factory material exactly
• Conforms to irregular surfaces
• Quickly seals out dust, water and fumes – also stops air intrusion
• Sticks to all types of automotive finishes
• Backing is resistant to abrasion and puncturing
• Allows immediate replacement of carpets and padding
• Not paintable
Description
Part No.
Chassis Tape 2” x 25’ P40575
Pkg. Qty.
1
5
Wet/Dry Re-Sealant
Specially formulated to stop leaks in windshields, tail lights, back
lights and fixed side glass. Compatible with windshield urethane.
Resealing fixed glass such as back glass, fixed side glass, hatches, opera
windows, sunroofs, t-tops and windshields.
• Black color
• Bonds to wet or dry surfaces
• Fills crevices and cracks without pinholing
• Remains flexible, won’t crack, peel or shrink
• GM No. 9984531
• Ford Tox No. 047178
Description
Part No. Pkg. Qty.
Pressure Pack, 6/Case
KT12407
1 Pint Can, 12/Case
P10590
11 Fl. Oz. Cartridge, 12/Case
P10570
12, 11 Fl. Oz. Cartridges with Pressure P6105
Cartridge Gun No. P90520
1
1
1
1
Liquid Rubber
Black, rubber-based sealer for hard to reach body seams and joints.
Flow grade specially formulated for inside the cowl, plenum and other hidden
areas. Ideal for sealing inaccessible areas.
• Seals wet or dry surfaces.
• Permanent flexibility
• No hardening or cracking
• Optional extension tube for
hard-to-reach seams inside
the plenum
Description
Pressure Pack, 6/Case
1 Pint Can, 6/Case
Part No. Pkg. Qty.
KT12406
1
P10240
1
Glass Mastic™
Easy-to-use sealant developed to permanently seal leaks
on gasket installed glass (rubber channel installations).
Suitable for both interior and exterior problems such as rubber installed windshields, back glass, opera windows and other rubber-to-glass and rubber-to-body
contact surfaces.
• Seals wet and dry surfaces
• Fast set for immediate water testing
• Remains flexible in service – does not crack, dry out or peel
Description
Pressure Pack, 6/Case
1 Pint Can, 12/Case
6
Part No.
KT12408
P10220
Pkg. Qty.
1
1
Pressure Pack Accessories
Accessories for pressure pack containers. Make
application of pressure pack products easier
and more convenient.
Description
Part No.
Pkg. Qty.
3“ nozzle
2“ pin point nozzle
45˚ trigger
7½“ extension tube
Pressure pack cap
KT12576
KT12575
KT12573
KT12574
KT12639
10
10
10
10
10
Odor Neutralizer Strip
Self-stick strips provide long-life odor elimination.
Ideal for odors caused by mildew, new paint, rustproofing,
smoke and undercoating. Place under dash, inside heating
and air conditioning outlets, under seats, inside trunk or
under package shelf.
• One strip provides long-lasting odor elimination
Description
Part No.
Pkg. Qty.
1½” x 1” Strips
P80071
50
Monsoon Water Hose Nozzle
An aluminum constructed water hose nozzle that provides
maximum water volume with a variety of spray patterns.
• Ideal for use in water leak testing as well as car washing
• Shuts off in both directions
• Limitless number of spray patterns
• Lifetime warranty
Description
Part No. Pkg. Qty.
Monsoon Water Hose Nozzle KT135324
1
7
Adhesive-Back Shim Stock
Close Tolerance Rubber
Pressure-sensitive, closed-celled EPDM sponge
rubber weatherstripping in a wide choice of sizes.
General weatherstripping for doors, trunks, hatch openings and sunroofs.
EPDM rubber for repairing water, wind
and dust leaks.
Use in shimming weatherstrip, to eliminate
collapsing and to replace old stock. Ideal for
hatch door and trunk leaks, and leaks.
• Easy to apply – cut to length,
remove backing and press in place
• Resists compression set
• Ozone and UV/resistant
• Resistant to UV and ozone
• Dimensionally uniform with excellent
compression set to ensure sealing
Description
1¼” Wide x 1⁄8” Thick x 50´
5⁄8” Wide x 1⁄8” Thick x 50´
Part No.
P46475
P40100
Pkg. Qty.
1 Roll
1 Roll
¼” Wide x 5 ⁄32” Thick x 30´
P46480
1 Roll
• 100% elasticity
• Use round stock for hollow weatherstrip
and half-round for solid
3 ⁄8” Wide
x ⁄
x 30´
P46485
1 Roll
Description
Part No.
Pkg. Qty.
3 ⁄8” Wide
x 5 ⁄16” Thick x 30´
P46490
1 Roll
3 ⁄8” Wide
x ⁄
x 30´
P46495
1 Roll
½” Wide x 5 ⁄16” Thick x 30´
P40125
1 Roll
½” Wide x 9⁄16” Thick x 30´
P40130
1 Roll
¾” Wide x 7⁄16” Thick x 30´
P46500
1 Roll
¾” Wide x 7⁄16” Thick x 30´
P46505
1 Roll
1” Wide x 5 ⁄16” Thick x 30´
P46510
1 Roll
¼” x 50´ Round
3 ⁄8” x 50´ Round
½” x 50´ Round
¼” x 50´ Half-Round
3 ⁄8” x 50´ Half-Round
½” x 50´ Half-Round
50´ Universal
P40360
P40320
P40325
P40330
P40335
P40340
P40345
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1 Roll
1” Wide x ⁄
P46515
1 Roll
5 32” Thick
7 16” Thick
9 16” Thick
8
• Closed-cell construction repels water
x 30´
Super Slick Dry Lube™
Clean, non-staining, non-silicone, dry lubricant for use on plastics, rubber,
vinyl, fabrics and metal surfaces.
For lubricating problem areas such as carburetor linkage, door locks, electric sunroofs, power antennas, electrical mechanisms/instruments, seat runners, shoulder
harness gears, and window channels, as well as for stopping squeaks in door trim,
dashboards, front end bushings, hard-to-reach pedals and vinyl-to-plastic contact
surfaces.
• Withstands temperatures from –40°F to +500°F (–50°C to +260°C)
• Safe on automotive paints
• Dries clean and clear – does not attract dust/dirt
• Silicone-free – no fish eye
Description
Part No.
• Ford Tox No. 016544
16 oz. Aerosol Can
P50077
Pkg. Qty.
1
S-46+™ 100% Silicone Spray
Special aerosol formula containing the highest quality silicone lubricant.
Designed for lubricating and weatherproofing automotive weatherstrips, rubber,
plastic, and metal. Highly recommended for rubber and weatherstrips to prevent
them from drying out, squeaking, sticking and wearing.
• Easy-to-use aerosol spray
• Extension tube for
hard-to-reach areas
• Safe on painted surfaces
Description
Part No.
16 oz. Aerosol Can
P50079
16 oz. Aerosol Can -VOC KT13394
Pkg. Qty.
1
1
• Doesn’t attract dust or dirt
All-Belt Rejuvenator
Aerosol spray that maintains maximum belt efficiency and performance
under heavy-duty automotive performance requirements.
For use on all automotive belts including A, V and serpentine. Also excellent for
use on hoses and rubber motor mounts to maintain pliability and prolong life.
Does not leave a sticky coating that can accelerate wear on belts.
• Restores pliability of belts
• Increases gripping ability
• Reduces wear
• Protects against peeling, splitting and cracking
Description
Part No.
Pkg. Qty.
16 oz. Aerosol Can
P10527
1
9
Ure-Foam™ Expandable Foam – Acoustical
Unique two-component expandable soft foam designed to eliminate panel
flutter, water leaks, and wind noise; duplicates OEM sound deadening.
Eliminates oil canning of door skins, hood/deck lids, roof panels, rear quarter assemblies and sail panels. Also useful for fixing water leaks found in hard-to-reach areas
like “A” pillars as well as for restoring the fit of collapsed weatherstrips.
Description
Part No. Pkg. Qty.
10 Fl. Oz. Dual Cartridge with
P10601
1
Two TM-3 Turbo Mixers – Black
1.7 Fl. Oz. Job Size with
P10630
1
• Conforms to irregular
Turbo Mixer– Black
shapes without dis7 Oz. Beige Dual Cartridge with KT13608
1
torting parts.
Two Turbo Mixers
• GM No. 9984534
7 Oz. Beige Job Size
KT13609
1
• Expands instantly
– up to ten times
original size
Sound Deadener Pads
Specially designed to eliminate the “tinny” sound of
replacement body panels. Sound Deadener Pads restore
the original sound deadening qualities on replacement
body sheet metal that comes without sound deadeners
of any type.
Use on door skins, hood and deck lids, floor pans and quarter
panels. A must for customer satisfaction, adds quality to repair
work at low cost.
• Adhesive backed for easy installation, saves time, labor and
materials
• Eliminates need to handle messy spray-on sound deadeners
• Pads may be warmed with a heat gun to shape them to
irregular body panels
• Paintable with standard automotive paints, for use under
hood, and inside trunks
Description
Sound Deadener Pads
20 Pads/Box, 6˝ x 6˝ Pads
Sound Deadener Pads,
10 Pads/Box, 12˝ x 12˝ Pads
Sound Deadener Sheets
29˝ x 32˝
Sound Deadener with
Aluminum Back, 6´ x 24˝
Floor Sound Deadener Pads
8 ¾˝ x 18” x ¹⁄ 8˝ Thick
Sound Deadener
A two part sound deadener designed to reduce noise and vibration.
• Designed to lower noise and vibration where pads or foams cannot be used
• Protects against corrosion
• Excellent sag resistance for use on vertical and overhead applications
• Great flexibility
• Up to 60 minute working time
10
Description
Part No.
Pkg. Qty.
Sound Deadener
2-part, 10 Oz. Dual Cartridge
KT13523
1
Part No.
P20617
Pkg. Qty.
20
P32947
10
KT13305
2
KT13306
12
P90225
10
BRS Tape
Anti-Squeak
Film Tape
Designed to help eliminate rattle and
squeaks in various areas of the vehicle.
A unique polyethylene film tape
designed to control squeaks, rattles and vibrations.
• High density felt-like material provides
anti-rattle/squeak relief
• Manufactured to OEM specifications
• Adhesive-backed to assure positive positioning
• Available in rolls and sheets
For GM
Description
Part No.
Pkg. Qty.
10mm x 10´ Roll
KT13485
1
30mm x 10´ Roll
KT13486
1
8” x 10” Sheet
KT13487
1
For Honda, Nissan, and Toyota
Description
Part No.
KT13294
1
30mm x 10´ Roll
KT13295
1
8” x 10” Sheet
KT13296
1
• Features ultra-high molecular
weight polyethylene for ultimate
squeak reduction
• Acrylic adhesive provides sure
attachment
Pkg. Qty.
10mm x 10´ Roll
• Ideal for any metal or plastic
application to eliminate squeaks
– i.e. dash areas
Description
Part No.
Pkg. Qty.
1” x 18“ Roll
KT13512
1
Versatape™
Designed for fast application of trim materials and sealing
out moisture, this roll adhesive adheres to most surfaces.
Easier to use than brush-on or tube products.
Description
½˝ Wide x 50´
¾˝ Wide x 50´
Part No. Pkg. Qty.
P20290
1
P20295
1
Recommended for numerous bonding and/or sealing operations
– reinstall tail light lens housings, reseal windshield mouldings, seal
metal side/roof panels on trucks, door panel splash shields, and
flush mounted glass and opera windows, seal sunroofs, entry points
at the firewall and waterproof electrical pass throughs.
• Bonds to wet or dry surfaces
11
Wind/Water Leak Glass
Leak and General
Trim Repair Systems
An integrated system approach to fixing leaks, squeaks and
quickly repairing window, door, trunk and hatch trim. This
system matches your application to the correct product
solution to analyze and solve specific problems.
Solve Virtually Any Problem
Practically any water, air or dust leak, plus any rattle or squeak can
be remedied with this system – including body and cowl areas,
door glass, interiors, stationary glass, weatherstripping, trunk and
hatch openings and windshields.
Kit Description Part No. Pkg. Qty.
Professional
P90165
1
Starter
P6807
1
Description
P90165:
Acrysol, 24 oz. Aerosol – P60170
1
High Tech Clear, Pressure Pack – K12421
1
Leak Trace Powder, 12 oz. Aerosol – P20165
1
Dry Lube, 16 oz. Aerosol – P50077
1
Super Bond, 10 Grams – P10690
1
Spray Leak Check, 24 0z. Aerosol – P50087
1
Ultra-Stick Adhesive, 16 oz. Aerosol – 10522
1
Ultra-Stick Weatherstrip Adhesive, Clear, 5 oz. Tube – P10192
1
Liquid Rubber, Pressure Pack – KT12406
1
Glass Mastic, Pressure Pack – KT12408
1
Resealant, Pressure Pack – KT12407
1
Pressure Pack 3” Nozzles – KT12576
10
Pressure Pack Trigger – KT12573
10
Pressure Pack Extension Tubes – KT12574
10
Pressure Pack Pin Point Tips – KT12575
10
Pressure Pack Caps – KT12639
10
All Belt Rejuvenator, 16 oz. Aerosol – P10527
1
S-46+, 16 oz. Aerosol – P50079
1
Odor Neutralizer Strips – P80071
50
Versatape, ½” x 50’ – P20290
1
Sound Deadener Pads, 6” x 6” – P20617
10
Close Tolerance Rubber 3⁄8” x 50 Round – P40320
1
Cabinet – PA5725
1
Description
P6807:
High-Tech Clear Sealer, 5 Oz. Tube – P10200
1
High-Tech Black Sealer, 5 Oz. Tube – P10070
1
Acrysol, Quart – P20005
1
Wet/Dry Re-Sealant, 11 Oz. Cartridge – P10570 1
Super Slick Dry Lube, 16 Oz. Aerosol – P50077
1
Leak Chek Spray, 24 Oz. Aerosol – P50087
2
Ultra-Stick Weatherstrip Adhesive-Clear,
1
5 Oz. Tube – P10192
Leak Trace Powder, 12 Oz. Aerosol – P20165
1
Carrying Case – PA5706
1
Wind/Water Leak Customer Work Sheet
For maximum repair efficiency and labor savings, use Kent’s Leak
Information Checklist during your inspection and diagnostic procedures. This handy form allows you to detail the trouble spots and
provides a quick reference list of the available repair materials.
Wind/Water Leak Product Guide
The key to using the system is referencing the included “Match
Your Leak or Squeak to the Proper Product” chart. Each product
in the system has an assigned number that is used to pinpoint
the specific application. This chart will let you confidently select
the proper product for locating and correcting leak or squeak
problems.
Product Guide and Customer Work Sheet included in assortments P90165 and P6807
1-888-YES-KENT
technical services
1-800-654-6333
Industrial Distribution
Association
customer service
1666 East Touhy Avenue
Des Plaines, IL 60018-3683
www.kent-automotive.com
Confidential material, reproduction, in whole or in part, prohibited. Printed in USA.
(Rev. 6/05) • E318K