Product Bulliten Envoy AGR30
Transcription
Product Bulliten Envoy AGR30
132068 Vic Chemicals Envoy AGR30.qxd 29/10/08 1:50 PM Page 1 ENVOY † S P R AY A D J U V A N T Oil (467g/L) - Australian Grown Canola Oil Carrier, maximises herbicide availability by reducing spray droplet evaporation through the air and on leaf surfaces TRIAL 1 Affect of pH on spray performance HERBICIDE: SPRAY RATE: WEED: SPRAY TIMING: Glyphosate 70g ai/ha 64 L/ha Annual rye grass 2-3 leaf stage Immediate use after mixing Sticker, increases spray droplet retention on target, reduces droplet rebound % Weed Control 14 DAT 100 _ surfaces 84 80 _ Wetters (280 g/L) - Spreader, reduces the tension in droplets 91 91 Penetrator, assists active ingredient penetration of weed 75 60 _ allowing greater coverage Surfactant, increases absorption throu gh the leaf surface 40 _ Buffer (137 g/L) - Protects pH sensitive agricultural products 20 _ from deactivation 0 _ pH9 pH7 Glyphosate 450g/Lt Glyphosate 450g/Lt + Envoy 0.5% Product Description Envoy Spray Adjuvant is a unique 3 in 1 product designed for Product Bulletin knockdown herbicides - based on Canola oil, it also contains a high concentration of Surfactants and a buffering system that is designed to enhance the performance of pH sensitive agricultural products in spray water with a pH greater than 8.0 or less than 6.0. TRIAL 2 Affect of timing on spray performance HERBICIDE: SPRAY RATE: WEED: SPRAY WATER: Glyphosate 70g ai/ha 64 L/ha Annual rye grass 2-3 leaf stage pH 9.0 % Weed Control 14 DAT Testing and Evaluation 100 _ When used as directed, Envoy spray adjuvant will protect the activity of pH sensitive agricultural products in all types of pH 83 83 80 _ 75 conditions encountered in spray water. 60 60 _ TRIAL 1 In pH 7 spray water, Envoy improves glyphosate performance. In pH 9 spray water glyphosate performance 40 _ deteriorates while Envoy maintains glyphosate performance. 20 _ TRIAL 2 The longer glyphosate is in contact with alkaline water, the less active it becomes. When Envoy is added first to alkaline spray water it neutralises the alkalinity and maintains glyphosate 0 _ Immediate use After 4 Hours Storage performance even when glyphosate has been in contact with Glyphosate 450g/Lt Envoy treated alkaline water for 4 hours before spraying. Glyphosate 450g/Lt + Envoy 0.2% 132068 Vic Chemicals Envoy AGR30.qxd 29/10/08 1:50 PM Page 2 Product Performance Key Benefits Most Canola oil based adjuvants provide only oil and minimal wetter. Envoy Spray Adjuvant provides 3 in 1 user convenience to reduce Envoy Spray Adjuvant goes further by including a buffering system costs in time and money. that is designed to neutralise spray water and protect pH sensitive agricultural products. Certain agricultural products (eg. Glyphosate) can lose some of their activity when mixed in alkaline water (pH>7). Agricultural product performance is enhanced as The unique buffering system minimises product degradation Alkaline Hydrolysis is the process where active ingredients break due to pH hydrolysis effects down in alkaline aqueous environments (eg. Spray Water.) The loss Losses are minimised due to reduced spray droplet evaporation of activity of the agricultural chemical is dependant primarily upon; through the air and on target surfaces 1. The level of alkalinity in the spray water Target coverage and absorption is increased 2. The time that the agricultural chemical is in the water Soft on the environment – Biodegradable 3. The degree of sensitivity of the agricultural product Consistent and Reliable – Manufactured according to a quality Other agricultural products may be sensitive to acidic conditions management system. (pH<7) and lose some of their activity when present in low pH water. To minimise the loss of activity of sensitive agricultural Suggestions for use products, simply add Envoy to the spray water first. Envoy is especially designed to bring the spray water’s pH into a neutral range (pH 6.5-7.5) refer to Table 1. The recommended usage rate for all applications of Envoy is in the range 200 mL – 500 mL per 100 Litres of the spray solution. For crop safety always strictly follow the directions on the Table 1 Initial pH of Water 4 7 9 9 / 340 ppm CaCO3 agricultural products label and if in doubt about using Envoy Water pH after Product Addition Envoy 0.2% Envoy 0.5% 6.7 6.8 7.5 7.2 7.5 7.2 7.5 7.2 always test by application to a small area before using it on a full-scale basis. Caution: Envoy is not recommended for use on crops, fruit trees, vines or other desirable vegetation as foliar injury may result. Table 1 shows that Envoy neutralises alkalinity in water that can reduce glyphosate performance. Eg. When 0.5% Envoy is added to water with pH 9.0 it neutralises the alkalinity and adjusts the water’s pH to 7.2. General Specifications Appearance Viscous Amber Liquid Colour 8-12 Gardner Specific Gravity (20ºC) 0.93 – 0.94 Always strictly follow label instructions before use † Trademark used under licence The Company Victorian Chemical Company (VCC) is located in Melbourne, Australia, and is a specialist manufacturer of a range of environmentally responsible oil and surfactant products. Established during 1933, VCC provides products and services to a wide range of industries including; Agriculture, Construction, Metal Manufacturing and Chemical Formulators. VCC is highly skilled at developing new product formulations, customising existing products to suit individual requirements and also supply high performance products that will provide enhanced safety to the user and the environment. VCC’s operations are governed by the international quality system ISO 9001 2000 which ensures consistent and reliable product performance. Victorian Chemical Company Pty. Limited 83 Maffra Street, Coolaroo, Victoria 3048, Australia Telephone: (03) 9301 7000 Facsimile: (03) 9309 7966 Website: www.vicchem.com Email: [email protected] Disclaimer: Victorian Chemical Company Pty. Ltd. has taken all reasonable care in preparing the information contained in the bulletin. However because the use of this information is beyond our control, Victorian Chemical Company Pty. Ltd. accepts no responsibility for any consequences whatsoever arising from the use of this information except responsibility imposed under any applicable law. TM The Australian Solution AGR30 211008