Unbelievably easy. Brilliantly fast.

Transcription

Unbelievably easy. Brilliantly fast.
www.bradyID.com.au/bbp33
Unbelievably easy. Brilliantly fast.
The way label making should be.
Unbelievably easy.
The way label making should be.
Introducing the BBP®33 Label Printer - a whole new way to make labels. No more tedious, time-consuming setups or calibrations. No more difficultto-load materials. No more wasted labels. No more hassles. This printer is so simple to use, most of our customers don’t even believe us the first time we
show them. But believe it, because it really is that easy.
It’s an industrial label printer that’s simple, powerful and brilliantly fast. Exactly the way label making should be.
Automatic label setup with no calibration!
The printer “reads” your cartridges and then automatically sets up
the label correctly in your Brady software.
■■
■■
■■
■■
No wasted labels
(hits the first label!)
No sensor adjustment
No need to specify if gapped
or notched supply
No print speed or burn temp trials
and errors
■■
■■
■■
No need to set up label
dimensions in software
No importing label file patches
into software
No scrolling through lists to select
your label part
The printer does all of this for you!
Record fast material changeovers
■■
■■
■■
■■
■■
■■
Complete ribbon and label changeovers, in as fast as 20 seconds!
Foolproof “drop-in” ribbon and label cartridges (anyone can do it)
Drop in the cartridge, lock it and start typing – that’s all you need to do!
No threading the ribbon around spools and printheads
Ink side of ribbon always faces the right way
Easy-to-handle cartridges that won’t roll away or get damaged
Prints on the first label
■■
■■
■■
No more wasted labels – even on sleeves!
No label calibration, alignment or sensor adjustments before printing
Save labels and save money
Impressive material lineup
See for yourself how the BBP®33 Label
Printer prints faster and eliminates
wasted labels
Visit www.bradyID.com.au/bbp33 today
With over 425 parts in 39 materials, this printer meets your primary
labelling needs, and so much more.
■■ Wire & panel labels AND safety & arc flash labels
■■ Rating plates & circuit board labels AND production line facility labels
■■ Pipe markers & 5S labels AND general purpose die cut labels
■■ GHS / CLP chemical labels AND full range of laboratory labels
■■ Plus, custom label sizes are available!
Brilliantly fast.
ON
PRINTS
EL
1ST LAB
!
E
T
S
A
W
NO
BBP®33 Software Options
The BBP®33 Printer is compatible with the following Brady labelling software:
■ MarkWare™ Software
■ LabelMark™ Software
■ CodeSoft™ Labelling Software
www.bradyID.com.au/bbp33
Material Options. Lots Of Options.
Electrical / Automation ID
Self-Laminating Wire & Cable Labels
Repositionable Wire & Cable Labels
Terminal Block Labels
PermaSleeve® PS Wire Marking Sleeves
Inside-Panel Component Labels
Raised Profile Labels – Legend Plates
Hi-Temperature General ID Labels
Electrical Component Labels
Cryo Tube Labels
Straw & Rob Labels
Conical & Large Tube Labels
Microplate Labels
Tissue Cassette Labels
Slide Labels
Centrifuge and PCR Tube Labels
General Lab ID (Bottles, Flasks, and Dishes)
GHS Chemical Labels
PB Board ID
Circuit Board Labels
Laboratory ID
B30C-2500-509-WT
B33-18-434
B33-164-481
B33-68-498
B33-103-457
B33-17-438
B30C-4250-551-WT
All labels were created using the
BBP®33 Label Printer and are
shown in their actual size.
B30C-1125-595-YL
ARC FLASH AND S
APPROPRIATE PP
2’ - 0” - Flash Hazard Bound
2.5
- cal/cm2 Flash Haard
#1
- PPE Level (FR shirt
protection, hard hat
0.48 - Shock hazard when
3 - 6” - Limited Approach
1’ - 0” - Restricted Approach
0’ - 1” - Prohibited Approach
B33-75-427
DEVICE NAME: PLATING LINE MCC FED
B33-75-427
B33-187-2-342
B33-9-427
B30-222-438
B30EP-174-593-BK
B30EP-173-593-SV
B30EP-173-593-SL
B30EP-177-593-YL
Create multicolour signs and chemical labels in 1 print pass by using supplies with
pre-printed colour headers, diamonds and colour bars.
B30-245-595-NFPA
SHOCK HAZARD
PE REQUIRED!
B30-261-7569-CLP4A
dry
d at 18 inches
& FR pants, or FR coverall, eye
t, VR rubber or leather gloves
n cover is open/removed
h
h
D FROM: PNL 213, BRKRS 10-18
B30-25-595-ANSIWA
B30EP-167-593-WT
Raised profile
engraved plate
B30EP-168-593-BK
substitute labels are
pre-cut for common
sizes, last 10 years outdoors and cost up
to 80% less than engraved.
B30C-2250-595-OR
B30C-1125-595-WT
B30-241-595-ANSIDA
B30C-4000-595-YL
B-595 vinyl is our most aggressive ever - it sticks to pipes and extremely
rough surfaces and lasts up to 10 years outdoors.
B30C-2250-595-GN
B30C-2250-595-GN
B30C-1125-595-BL
The Possibilities Are Endless.
Product & General Purpose ID
General Purpose Industrial ID Labels
Asset Tracking Metallised Labels
Outdoor Grade Vinyl Labels
Paper Labels
Indoor Use Polypropylene Labels
Facility & Safety ID
Pre-Printed Pre-Cut Sign Headers –
Arc Flash & Safety Warning Labels
Pre-Printed Pre-Cut Sign Tags
Retro Reflective Tapes
BradyGlo™ Photoluminescent Tapes
Indoor/Outdoor Grade Facility & Safety Tapes
Low Halide Tape for Stainless Steel
and Smooth Surfaces
GHS / CLP Chemical Labels
Printable Magnetic Tapes
Repositionable Tapes for 5S
and Lean Applications
Cold Temperature Application Tapes
www.bradyID.com.au/bbp33
Brady Materials Are Made To Impress.
Brady labels last the longest, period.
Brady labels stick and stay stuck, plain and simple. In fact, some last up to 10
years outdoors. You only need to make these labels once!
Options. Lots of options.
We make labels for specific applications. That’s why we have hundreds of
label types and sizes to choose from. And if you don’t see the label you need
we’ll custom-produce it to your size and shape requirements (in approved
Brady material parts). We want you to be 100% confident that you have the
right label for your exact application.
We set the bar high.
Brady materials lead the industry in durability and performance because we
design and manufacture every label ourselves in our own facilities. We put our
materials through rigorous, painstaking tests and trials – and nothing leaves
our doors until it passes with flying colours.
With label printing like this,
the possibilities are endless.
Printer
Specifications
Brady Software
BBP®33 Label Printer
Description
Applications & Other
Comments
High performance “full hassle-free” printing where smart
chip supplies automatically set up label eliminating
calibration steps and label waste. Time saving drop-lockand-print label rolls and ribbons.
True multi-application printer with complete range of supplies
for both Wire, Cable, Product and Electronics applications
as well as Safety, Facility and Lean/5S applications and
Laboratory applications.
Wire ID & Small
OEM labels
1000 labels per day
8 hours / 5 days
Recommended
Throughput &
Operational Hours*
Print Technology
Print Resolution
Auto Cutter
Max Print Speed
Max Print Width
Media Widths
Minimum Label
Dimension
Colour Capabilities
PC Connect or
Stand Alone
Safety labels
600 (50.8 mm x 101.6 mm)
labels per day
300 larger labels per day
Thermal Transfer
300 dpi
Standard (Built-in)
101.6mm per second (4”)
101.6 mm
104.8mm
Powerful and easy-to-use Brady software takes your label-making muscle to even higher
levels.
LabelMark™ Labelling Software
■■ Written specifically for wire and data comm ID,
ADM labelling and general industrial applications.
■■ Robust software solution for label design, data importing, editing and
printing.
■■ Printer automatically reads installed supply and sets up label part for
full hassle-free use when using Brady’s
LabelMark software.
For additional information visit www.bradyID.com.au/labelmark
6.4mm
Monocolour
PC Connect only
Standard: USB, Ethernet
Optional: WiFi, Bluetooth
Printer Language
BPL (Brady Programming Language)
Labelmark™ Software, MarkWare™ Software, Codesoft™
Compatible Software
Software, Windows® based driver for
3rd party software use
* Not a guarantee of performance. Depends on specific label size, text printed and
other factors.
Connectivity Options
Specialty Material Recommendations
B-593 Raised Panel
Labels
Yes (Recommended)
Nomex® Tags
Not Available
B-330 Polyolefin
Heat Shrink Wrap
Not Available
PermaSleeve
PS & HT
Yes (Recommended)
®
PermaSleeve HX
PermaSleeve® ZH
Double-Sided
PermaSleeve®
DuraSleeve® Insert
Custom Labels
Yes (Recommended)
Not Available
®
Yes (with 2-pass reinsert of media)
Not Available
Yes (in approved B numbers)
MarkWare™ Facility Identification Software
■■ Create custom safety signs & labels including pipe markers, arc flash,
lockout tags, GHS labels and custom labels with bar codes and graphics.
■■ Template wizard walks you through label creation process.
■■ Built-in graphics.
■■ Pre-formatted GHS label templates.
■■ Printer automatically reads installed supply and sets up label part for
full hassle-free use when using Brady’s
MarkWare software.
For additional information visit www.bradyID.com.au/markware
CodeSoft™ Label Design Software
■■ Available separately, this powerful enterprise level label creation
software features more extensive capabilities for integration with
3rd party software applications.
■■ User selects part from database before printing when using CodeSoft
software, and user enjoys full hassle free supply installation.
For additional information visit www.bradyID.com.au/codesoft
Physical Properties
Height x Depth
x Width
Weight (lbs.)
Energy Consumption
(max)
Operating Temperature
/ Humidity
Non-Condensing
241.6 mm x 230.6 mm x 304.8 mm
5.3kg unloaded
16.26W in sleep mode, 255W printing
10-40°C / 10-80% non condensing
UL, cUL, CE, WEEE RoHS, C-Tick (Australia),
GOST R (Russia), UL statement of equiv (Mexico)
Regulatory
MarkWare™ Software now includes a GHS / CLP Label Module
■■
■■
■■
■■
18 pre-formatted label layouts and approved GHS symbols are built-in – no need to set up the layout
User selects approved pre-worded hazard statements and GHS symbols which then automatically
populates into layout – no need to type everything in
Prompts for additional variable data which then auto-populates into layout
Choose a second language and MarkWare auto-populates in the second language
Part # 20700 (current MarkWare users: upgrades to v3.9.3 are available. Go to www.bradyid.com.au/softwareupdates
www.bradyID.com.au/bbp33
The BBP®33 Label Printer is unbelievably easy to use –
anyone can use it. It’s brilliantly fast. And best of all, it’s got so
many material options that this one printer can handle all your
labelling needs.
It’s the way label making should be.
Printer and Software
Part No.
Description
875157
BBP®33 Label Printer with Auto Cutter and LabelMark™ Software
875158
BBP®33 Label Printer with Auto Cutter and MarkWare™ Software
875159
BBP®33 Label Printer with Auto Cutter, LabelMark™ Software and MarkWare™ Software
* BBP33 Label Printer ships with printer, power cord, USB cable, drivers CD, cleaning kit, cutter cleaning tool
and quick start guide.
urrent MarkWare owners: Markware v3.9.1 or higher is required for use with BBP33 Printer. MarkWare v3.7
C
or higher required to upgrade. Upgrades are free and available at www.BradyID.com.au.
urrent LabelMark owners: The current version of LabelMark 5 or higher is required for use with BBP33
C
Printer. If you already own a prior version of LabelMark 5, a free upgrade is available from Brady Tech Support
or click “update” from within your LabelMark program.
Current CodeSoft owners: CodeSoft v9.0 or higher and the current CodeSoft driver file are both required for
use with BBP33 Printer.
Printer Accessories
Part No.
Description
108365
Rolling case w/ handle and supplies pockets for benchtop printers
142114
5 pack of extra media wipers
142116
3 pack of extra cutter cleaning tools
142266
Brady Network Card - Bluetooth® and WiFi
142267
Brady Network Card - Ethernet Only
142268
Brady Network Card - Bluetooth® / WiFi / Ethernet
Learn more about the BBP®33 Label Printer
and watch an online introduction video at
www.bradyID.com.au/bbp33
Windows® is a registered trademark of Microsoft Corp. CodeSoft™ is a registered trademark of
Teklynx Corp. Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
U.S. Patent Nos. 5,823,689; 6,570,602.
Additional Patents Pending.
Brady Australia Pty Ltd
2 Bellevue Circuit
Greystanes NSW 2145
Phone: 1800 620 816
Fax: 1800 805 076
www.bradyID.com.au
BR13B33 © 2013 Brady Worldwide Inc. ALL RIGHTS RESERVED