AFD - Desoutters EN

Automatic Feed Drills
What does it do?
The new AFD’s dedicated website is
available, included “easy to choose & select”
All information in unique
le!
Availab
place!
One new Tools selection
Software!
3D CAD drawing to easy
incorporation!
Direct quotation demand
links!
Catalogue in pdf available!
Services sheets!
The Desoutter range of Auto Feed Drills & Tappers are fixture mounted tools
combining linear feed motion & rotation for drilling & tapping operations.
AFD
AFDE
Electric
Motor
Integral
Pneumatic
Motor
Pneumatic
Cylinder
AFD (205) - 1450 - A1 - K 32
Type Code
AFD
AFDE
AFT
AFTE
Feed / Drive
Pneumatic Feed / Drive
Pneumatic Feed / Electric Drive
Pneumatic Leadscrew Tapper
Electric Leadscrew Tapper
Code
205
215
415
625
Power
0.22kW
0.22kW
0.38kW
0.52kW
Stroke
50mm
90mm
100mm
100mm
200
400
410
610
0.25kW
0.37kW
0.75kW
0.75kW
90mm
100mm
100mm
100mm
480
0.75kW - electric
60mm
No Load Speed
AFD/AFT
@6.3bar+/-0.15bar
AFDE/AFTE @50Hz
Code
A1
A6
A7
A8
Control Block Type
Full Feature
Simple
Leadscrew Tapper PNP
Leadscrew Tapper NPN
Output Type
Chuck
Collet (Max. 8mm)
Preset Tooling DIN55058
¼” Hex Clutch
5/16” Hex Clutch
6.5mm Tapping Gearbox
8mm Tapping Gearbox
B16 Taper
Jacobs No 2 Taper
Jacobs No 1 Taper
ISO30 Taper
Multi Head Adaptor
High Speed Gearbox
Code
K
B
R
Tool Types
200 Series
400/600 Series
400/600 Series
4 Types of AFD
Up to 630W!
Pneumatic Drive and Feed
Up to 1100W!
Electric Drive/Pneumatic Feed
Pneumatic & Electric + Tapers box
Electric Leadscrew Tappers
Pneumatic control connections:
O
ST
1
SP
P
O
M
R
Mains Air Input
Start button - manual
Remote start - input
Retract button - manual
Remote retract - input
Depth signal - output
Datum signal - output
Air return port - output
Retract rate adjustment
Advance rate adjustment
Feed rate adjustment control
Electric control connections: A1 - Control Block (full feature)
S1
Start Solenoid - input
S2
Retract Solenoid - input
SW1 Datum signal - output
SW2 Depth stop signal - output
Use A1 block with AFD, AFDE
& AFT470
Solenoid – real look
Solenoid – theory
A6 - Control Block (simple)
Control connections:
O
F
Mains Air Input*
Feed port - input
RN
Retract port - input
SW1 Datum signal - output
SW2 Depth stop signal - output
Use A6 block with AFD & AFDE
* mains air input is not required
for AFDE
400 / 410 / 610 series
NOT THE FINAL OUTPUT
Multi spindle Heads
A comprehensive range of
multi spindle Heads (adjustable
& fixed spindle) are available for
drilling & tapping:
These are specified as an accessory
and are used with the following
output spindles:
200 series - use K35 output spindle
400/410 series - use B24 output spindle
600 series - use B24 output spindle
• Used for splitting the drilling phase into 3 phases – 3 speeds
Fast for approach
Slow for drilling
Fast for retract
Peck Feed is generally used when hole depth is greater than 5 times the hole
diameter being drilled
It helps to clear swarf, reduces the risk of overheating of the drill bit & drill breakage,
and can reduce ‘work hardening’ of materials such as Titanium
Skip feed control is used to improve & minimise cycle time when drilling box / tube
sections, pocketed castings, etc.
Valuable time can be saved when drilling ‘fresh air’
The skip feed control provide a controlled feed, followed by a fast feed,followed by
a controlled feed
AFD mounting systems
Desoutter offer a wide range of flexible mounting components to allow any
orientation of the tool.
All clamps are manufactures from cast aluminium and machined to precision
tolerances
Mounting columns are manufactured from steel
More Than Productivity