Engineered Wood Products - Whole of House

Engineered Wood
Products
East Coast
The Offer
4 Major components make up the Engineered
Wood Products (EWP) Offer
- LVL (Laminated Veneer Timber)
- I- Joists
-Glulam (Glued Laminated Timber)
-Timber connectors (Brackets)
Other Key Features
- Various wood treatments
- Takeoff service
Choice of Leading Manufacturers
- Complimentary design software
- Suits both residential and commercial applications
- Lengths up to 18 metres
- Consistent quality (strength and defect free)
Engineered Wood Products (EWP)
Ridge Beam
Roof Rafter
Wall Intel
TYPICAL FLOOR LAYOUT
Floor Joist
Bearers
Engineered Floor Systems to suite all
applications
Can be used in a variety of applications
Laminated Veneer Lumber (LVL)
-
Commonly used as Bearers, Floor Joists, Lintels, Ridge Beams
and Rafters
- Available in sizes from 90x35mm to 600x75mm
- LVL is available in specific commercial product grades. Refer to
individual product and manufacturers span tables for best
selection in each application.
- Various Treatment options available in H2 and H3 against
termite attack and decay
I-Joists
- Commonly used as Floor Joists and Rafters.
- Available in sizes from 200x44mm to
400x90mm
- Various Treatment options available in H2
to protect against termite attack.
- Complete range of brackets available and
various fixing methods for every
application
Glulam (Glued Laminated Timber)
- Typically used in high loads that may
require higher stiffness material that is
beyond the capabilities of LVL.
- Commonly used as Bearers, Lintels, Ridge
Beams and Rafters
- Beams can be ordered pre-cambered or as a
straight beam.
- Available in various treatments in H2 & H3
to protect against termite attack and
fungal decay.
Fixing Methods and Hangers
- A complete range of hangers to suit all applications.
- Various timber to steel beam fixing methods available
- A number blocking applications to suit every job
Rim
Joist
Hole Cutting
- A complete guide to all methods of notching, cut backs and hole cutting.
Typical Treatment Offers
Available treatment options
-H2-S Offers protection against termite
attack, in areas “South of the Tropic of
Capricorn” only.
-H2 Offers protection against termite
attack and is accepted in ALL parts of
Australia
- H3 Offers protection against termite
attack and fungal decay, when used
externally above ground.
The Design Centre
• The Design Centre offers a free take-off and Engineering Service
• This service is not direct to the public, as it is managed by the Bunnings Channel
Technical Support
The Offer
- A full suite of Technical products is
available
- Design Guides
- Span tables
- Technical Data
- Brochures
- Technical Dept Support via Phone
(one for each brand)
- One Site Support (by appointment)
Design Software
Free Design Software available from all leading brands
EWP Brands
SmartFrame – Tilling Timber
Brands Include:
SmartLVL 15 – Laminated Veneer Lumber
SmartJoist – I Joist
Red Alert – Bearer and Joist System
FrameSmart – Pine Framing Material
SmartLAM – Glue Laminated Beams
Lutre – Internal Lining Boards
Architectural Claddings – External/Internal
SmartEst – Quick Quotes
Free Design Service
For more details visit www.tilling.com.au
EWP Brands
hySPAN is the product you know and trust
• hySPAN+ offers an alternative to F17 hardwood
beams in traditional sizes
• hyJOIST Engineered I-Joists are cost effective and
lightweight perfect for residential and commercial
construction
• Terminator cost effective termite protection with 25
year guarantee
• Technical Expertise Fully supported by on site CHH
technical expertise and Free phone support – 1800
808 131
• designIT software Free design software
• designIT site Frees smart phone app
EWP Brands
Building Systems
• e-joist
• e-beam
East Coast Offer
• e-beam+ [F17] JD3
(with the same joint strength group as F17 H/Wood)
• e-bearer + joist
• e-garage
• e-house software
The Process
Email or drop off
plans to Bunnings
Trade Rep
Select EWP product
options and brand
Quote for Take-Off
will be provided
Order is placed
Builder to raise an
order with Bunnings
Trade with signed
approval
A Bunnings Trade
Rep will present a
quotation for review
and approval by
Builder
Delivery of order to
Site as per agreed
date
Can we help?
Bunnings welcome the opportunity to quote your next job.
72 hour quote turnaround.
Please contact your local Bunnings representative or call 133 062.