Manufacturing Capabilities

... a World Leader in
Clamping Technology
Design & Engineering
Voss application engineers are prepared to help solve
your specific needs—from product inception, through
manufacturing, to customer support. We can produce parts
from your prints, or we can do
the design and development
work for you. Voss also has
complete project management
capabilities, or we can work
directly with a prime contractor.
More importantly, Voss has
the experience, expertise,
and R&D capability to help
meet your unique component
design requirements.
P r o d u c e s
h i g h - q u a l i t y,
competitively-priced
Voss clamping and coupling devices for a
broad spectrum of industrial OEM applications.
These products include a wide variety of light-toheavy-duty hose clamps, V-retainer couplings,
brackets, metal hold-down straps and a variety
of weldments and fabrications. Voss products
are used on diesel engines, heavy-duty
trucks, off-road equipment, turbochargers,
air conditioners, filtering devices, tanks and
pressurized vessels, diaphragm and centrifugal
pumps—to name just a few.
Manufacturing Capabilities
Tooling, Prototyping & Testing
Specializes in the design
and manufacture of highperformance
clamping
and coupling components
and fabricated subassemblies for the aviation and
aerospace markets. Principle product lines include:
V-retainer couplings, rigid couplings, sheet metal
and machined flanges, clamps and attachements for
commercial and military aircraft pneumatic ducting
systems, jet engine bleed air connections, missile
components and accessory attachments, offset
transition tubes and ducts. Extensive R&D, testing,
and prototyping projects are also performed.
Being able to produce high
quality components time after
time is due primarily to our
total in-house design, tooling,
prototyping,
and
testing
capabilities. Voss uses the latest
in CAD and CNC technology
to design and produce any
special tooling required. Once
product designs are finalized,
prototypes are developed to
exacting specifications and
then subjected to product and
qualification testing.
VAC 02/11
ƒƒ Deep Drawing
ƒƒ Roll Forming
ƒƒ Axial-Load Bulge Forming
ƒƒ CNC Machining
ƒƒ Chemical Processing
Quality Assurance
Our ability to perform destructive and nondestructive product
testing, plus a complete metallurgical laboratory, help ensure
the highest quality components. Voss has a Quality Assurance
program that meets FAR 21.303H,
ISO
9001:2000,
AS9100B
and customer specific quality
systems requirements to further
ensure product quality and timely
deliveries. Our manufacturing
quality is a result of innovative
engineering,
extensive
inhouse tooling capability, refined
production processes, supplier
management, and a companywide
quality
management
philosophy. This ensures that
we not only meet contractural
specifications and requirements,
but also satisfy our own stringent
standards
of
quality
and
performance.
ƒƒ Precision Stamping
Designs and manufactures
specialized,
high-quality
clamp and coupling devices
and custom fabrications for
many “hi-tech” industries. Voss Technologies uses
innovative design capabilities and special processes
developed for aerospace applications and applies
them to product development and production for
applications in such industries as telecommunications
(navigation positioning receivers), medical (imaging
equipment), instrumentation (optical measuring
muilti-positioning supports) and defense (tanks and
tactical vehicles).
2168 West 25th Street
Cleveland, Ohio USA 44113-4172
ph: (216) 771-7655
fax: (216) 771-2887
email: [email protected]
web: www.vossind.com
ƒƒ Welding & Brazing
ƒƒ Fabrication & Assembly
ƒƒ Metal Coating/Finishing
ƒƒ Aerospace Fasteners
ƒƒ Wire EDM
www.vossind.com
Precision Stamping
& Deep Drawing
A variety of stamped and deep drawn parts can be produced
on presses up to 1000 ton capacity. Our in-house tool and
die facility provides precision tooling for both simple and
complex metal parts. We specialize in prototyping and
short-to-medium production runs, producing parts from
aerospace alloys including: stainless steels, nickel alloys
and titaniums, etc. Other secondary operations include:
blanking, piercing, coining and swaging.
Welding & Brazing
Roll Forming
Fabricating & Assembly
With certified GMAW and GTAW capabilities, Voss has the
welding expertise to join conventional and exotic alloys; we
are also ASME welding certified and NADCAP accredited.
Automatic seam welders are utilized for joining metals
using consistent high-quality longitudinal welds up to 48
inches long. Voss also features the area’s largest certified
resistance spot welding capability for volume production
of componenets. We also have nickel, copper, and silver
brazing capabilities.
Specializing in roll-formed rings, Voss has been been
producing roll-formed shapes since our founding in 1957.
We design and produce all tooling in-house for both
symmetrical and non-symmetrical ring cross sections
ranging in diameters from 2 inches through 12 feet. Custom
roll-formed rings and straight shapes are made from high
performance alloys, including: stainless steels, nickel alloys
and titaniums from 0.020 to 0.186 inch thickness.
Voss’ fabricating and assembly capabilities enable us to
furnish you with components that have been machined,
welded, brazed and riveted—all to your specification
and all under our control. Over 300 different production
and process machines allow us to perform all these
operations with unmatched attention to detail throughout
the production process for prototypes and short or long
production runs. Voss’ fabrication and assembly expertise
is ideal for manfacturing superalloy components.
Voss is a high-quality parts
manufacturer that you can rely on!
Voss has volume capacity and flexibility
to produce a wide variety of parts
Bulge Forming
CNC Machining
Metal Coating/Finishing
Aerospace Fasteners
Axial-load bulge forming is the most advanced technology
for producing sheet metal components from superalloy
materials. Voss Aerospace bulge forming presses can
maintain uniform wall thickness up to 0.250 inch thick with
tolerances of ±0.001 inch, depending upon material. Bulgeformed components can be produced up to 24 inches long
and 36 inches in diameter. Intricate parts as small as 1/4
inch diameter and 0.008 inch material thickness can also
be accomodated.
Voss CNC machining capabilities encompass state-of-theart milling and turning centers, as well as wire EDM; enabling
Voss to provide precision, one-of-a-kind prototypes through
high quantity production runs. We have the capacity and
flexibility to produce a wide range of high quality parts. Our
extensive experience ranges from machining parts from
aluminum to difficult-to-machine superalloys such as nickel
625 and 718, and everything in-between.
Voss Aerospace performs a variety of in-house coating
and finishing operations, including industrial and MIL-Spec
painting and dry-film lubrication. Finishing quality is ensured
through proper preparation and peretreatment of parts.
Painting is done in a temperature-controlled atmoshpere
and features a variable-speed, conveyorized paint line,
enclosed spray booths with filtered air and an inline, infrared
baking oven. Larger or racked parts utilize a 12 foot wide
spray booth, plus a walk-in, gas fired convection oven.
We are the only company in our specialty of clamping and
coupling devices to manufacture our own fasteners to
stringent industrial and aerospace standards. Since our
founding, Voss has produced fasteners from alloy steels,
stainless, A286 alloy and nickel alloy 718 for our full line
of products. In-house metallurgy and testing laboratories
are utilized to monitor each heat lot of wire throughout all
production steps to the finished fastener. This expertise is
now available to the Aerospace Industry for production of a
variety of specialized or custom fasteners.
Precision Stamping
& Deep Drawing
A variety of stamped and deep drawn parts can be produced
on presses up to 1000 ton capacity. Our in-house tool and
die facility provides precision tooling for both simple and
complex metal parts. We specialize in prototyping and
short-to-medium production runs, producing parts from
aerospace alloys including: stainless steels, nickel alloys
and titaniums, etc. Other secondary operations include:
blanking, piercing, coining and swaging.
Welding & Brazing
Roll Forming
Fabricating & Assembly
With certified GMAW and GTAW capabilities, Voss has the
welding expertise to join conventional and exotic alloys; we
are also ASME welding certified and NADCAP accredited.
Automatic seam welders are utilized for joining metals
using consistent high-quality longitudinal welds up to 48
inches long. Voss also features the area’s largest certified
resistance spot welding capability for volume production
of componenets. We also have nickel, copper, and silver
brazing capabilities.
Specializing in roll-formed rings, Voss has been been
producing roll-formed shapes since our founding in 1957.
We design and produce all tooling in-house for both
symmetrical and non-symmetrical ring cross sections
ranging in diameters from 2 inches through 12 feet. Custom
roll-formed rings and straight shapes are made from high
performance alloys, including: stainless steels, nickel alloys
and titaniums from 0.020 to 0.186 inch thickness.
Voss’ fabricating and assembly capabilities enable us to
furnish you with components that have been machined,
welded, brazed and riveted—all to your specification
and all under our control. Over 300 different production
and process machines allow us to perform all these
operations with unmatched attention to detail throughout
the production process for prototypes and short or long
production runs. Voss’ fabrication and assembly expertise
is ideal for manfacturing superalloy components.
Voss is a high-quality parts
manufacturer that you can rely on!
Voss has volume capacity and flexibility
to produce a wide variety of parts
Bulge Forming
CNC Machining
Metal Coating/Finishing
Aerospace Fasteners
Axial-load bulge forming is the most advanced technology
for producing sheet metal components from superalloy
materials. Voss Aerospace bulge forming presses can
maintain uniform wall thickness up to 0.250 inch thick with
tolerances of ±0.001 inch, depending upon material. Bulgeformed components can be produced up to 24 inches long
and 36 inches in diameter. Intricate parts as small as 1/4
inch diameter and 0.008 inch material thickness can also
be accomodated.
Voss CNC machining capabilities encompass state-of-theart milling and turning centers, as well as wire EDM; enabling
Voss to provide precision, one-of-a-kind prototypes through
high quantity production runs. We have the capacity and
flexibility to produce a wide range of high quality parts. Our
extensive experience ranges from machining parts from
aluminum to difficult-to-machine superalloys such as nickel
625 and 718, and everything in-between.
Voss Aerospace performs a variety of in-house coating
and finishing operations, including industrial and MIL-Spec
painting and dry-film lubrication. Finishing quality is ensured
through proper preparation and peretreatment of parts.
Painting is done in a temperature-controlled atmoshpere
and features a variable-speed, conveyorized paint line,
enclosed spray booths with filtered air and an inline, infrared
baking oven. Larger or racked parts utilize a 12 foot wide
spray booth, plus a walk-in, gas fired convection oven.
We are the only company in our specialty of clamping and
coupling devices to manufacture our own fasteners to
stringent industrial and aerospace standards. Since our
founding, Voss has produced fasteners from alloy steels,
stainless, A286 alloy and nickel alloy 718 for our full line
of products. In-house metallurgy and testing laboratories
are utilized to monitor each heat lot of wire throughout all
production steps to the finished fastener. This expertise is
now available to the Aerospace Industry for production of a
variety of specialized or custom fasteners.
... a World Leader in
Clamping Technology
Design & Engineering
Voss application engineers are prepared to help solve
your specific needs—from product inception, through
manufacturing, to customer support. We can produce parts
from your prints, or we can do
the design and development
work for you. Voss also has
complete project management
capabilities, or we can work
directly with a prime contractor.
More importantly, Voss has
the experience, expertise,
and R&D capability to help
meet your unique component
design requirements.
P r o d u c e s
h i g h - q u a l i t y,
competitively-priced
Voss clamping and coupling devices for a
broad spectrum of industrial OEM applications.
These products include a wide variety of light-toheavy-duty hose clamps, V-retainer couplings,
brackets, metal hold-down straps and a variety
of weldments and fabrications. Voss products
are used on diesel engines, heavy-duty
trucks, off-road equipment, turbochargers,
air conditioners, filtering devices, tanks and
pressurized vessels, diaphragm and centrifugal
pumps—to name just a few.
Manufacturing Capabilities
Tooling, Prototyping & Testing
Specializes in the design
and manufacture of highperformance
clamping
and coupling components
and fabricated subassemblies for the aviation and
aerospace markets. Principle product lines include:
V-retainer couplings, rigid couplings, sheet metal
and machined flanges, clamps and attachements for
commercial and military aircraft pneumatic ducting
systems, jet engine bleed air connections, missile
components and accessory attachments, offset
transition tubes and ducts. Extensive R&D, testing,
and prototyping projects are also performed.
Being able to produce high
quality components time after
time is due primarily to our
total in-house design, tooling,
prototyping,
and
testing
capabilities. Voss uses the latest
in CAD and CNC technology
to design and produce any
special tooling required. Once
product designs are finalized,
prototypes are developed to
exacting specifications and
then subjected to product and
qualification testing.
VAC 02/11
ƒƒ Deep Drawing
ƒƒ Roll Forming
ƒƒ Axial-Load Bulge Forming
ƒƒ CNC Machining
ƒƒ Chemical Processing
Quality Assurance
Our ability to perform destructive and nondestructive product
testing, plus a complete metallurgical laboratory, help ensure
the highest quality components. Voss has a Quality Assurance
program that meets FAR 21.303H,
ISO
9001:2000,
AS9100B
and customer specific quality
systems requirements to further
ensure product quality and timely
deliveries. Our manufacturing
quality is a result of innovative
engineering,
extensive
inhouse tooling capability, refined
production processes, supplier
management, and a companywide
quality
management
philosophy. This ensures that
we not only meet contractural
specifications and requirements,
but also satisfy our own stringent
standards
of
quality
and
performance.
ƒƒ Precision Stamping
Designs and manufactures
specialized,
high-quality
clamp and coupling devices
and custom fabrications for
many “hi-tech” industries. Voss Technologies uses
innovative design capabilities and special processes
developed for aerospace applications and applies
them to product development and production for
applications in such industries as telecommunications
(navigation positioning receivers), medical (imaging
equipment), instrumentation (optical measuring
muilti-positioning supports) and defense (tanks and
tactical vehicles).
2168 West 25th Street
Cleveland, Ohio USA 44113-4172
ph: (216) 771-7655
fax: (216) 771-2887
email: [email protected]
web: www.vossind.com
ƒƒ Welding & Brazing
ƒƒ Fabrication & Assembly
ƒƒ Metal Coating/Finishing
ƒƒ Aerospace Fasteners
ƒƒ Wire EDM
www.vossind.com