www. hannainst.com/usa

Transcription

www. hannainst.com/usa
Welcome to the HANNA instruments®
Agricultural Products Catalog 5th
Edition
For well over two decades, HANNA instruments® has led the world with innovative
solutions to agricultural testing needs. We know how important testing and
controlling analytical properties is for effective nutrient management in both
soil and irrigation water. Our world-wide research and development facilities
are constantly working on new products to the benefit of our loyal customers.
We understand that your measurement and
control equipment must be well-built and
perform with high reliability. All of our
products are manufactured to the most
stringent standards in state-of-the-art facilities
to ensure the highest quality.
HANNA® believes in supplying the
agricultural community with a simple
method for
testing the
HANNA instruments®
parameters
Agricultural Division
Customer support
that are
It is our philosophy that the best way to support
our customers is to be closer to them. HANNA
instruments® has over 30 offices around the
world to provide our customers with dedicated
service that is "just around the corner".
essential to
Technical department
It is our goal to provide each customer with easy access to one on one technical
expertise for operational and application specific assistance.
Extensive warranty
All HANNA products are covered by a parts and labor warranty, ranging
from six months to five years.
Reliable products
Over two decades of manufacturing instrumentation to ISO 9001 standards is
reflected in every aspect of your HANNA instrument.
Attractive pricing
By developing and manufacturing every product in-house, HANNA pricing is a
major source of envy for our competitors. We are reputed to offer the best value
on the market.
the proper growth of plants and
vegetables. You will find that our
products are extremely easy to use,
economical and will assist you in
growing superior crops — assuring
Continuous innovation
By listening closely to our customers, we are able to provide agricultural
testing instruments that offer innovative features and exceptional reliability.
that the quality of your product is
Ready-to-use
HANNA products are supplied with electrode(s), solutions and chemical reagents
so they can perform right out of the box. Our field meters are supplied with a
hard carrying case.
Complete range
In addition to an extensive range of pH and conductivity meters, we also
manufacture electrodes, calibration and maintenance solutions, a complete
range of application specific photometers, dissolved oxygen meters,
thermometers and much more.
HANNA online
To view HANNA's complete line of products and applications, visit us on the
web at www.hannainst.com.
at its peak.
Contents
Testers . . . . . . . . . . . . . . . . . . . .4-11
Thermometers . . . . . . . . . . . . .34-37
pH/ORP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6
EC/TDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8
Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Relative Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
1 or 4 channel Thermometers . . . . . . . . . . . . . . . . . . .34
Thermocouple Thermometers . . . . . . . . . . . . . . . .34-37
Infrared Thermistor Thermometer . . . . . . . . . . . . . . . .35
Thermocouple Probes . . . . . . . . . . . . . . . . . . . . . . . . .37
Monitoring & Control
Portable Meters . . . . . . . . . . . .12-21
pH/ORP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-14
EC/TDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16
Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-18
Dissolved Oxygen . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Relative Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
LUX (Light) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Nutrient Management Meters
& Kits . . . . . . . . . . . . . . . . . .22-25
Suction Lysimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Grow Master N, P, K, Ammonia Photometer . . . . . . . .23
Ion Specific Photometers . . . . . . . . . . . . . . . . . . . .24-25
Chemical Test Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Monitoring Systems . . . . . . . . .26-33
pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
EC/TDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-28
Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29-30
Hygrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Temperature Monitors and Dataloggers . . . . . . . .31, 33
. . . . . . . .38-54
Controller & NEMA Enclosure . . . . . . . . . . . . . . . . . . . . . .38
HANNA Customized Panels . . . . . . . . . . . . . . . . . . . . .39
Mini Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-41
pH/ORP Panel Mount Controllers . . . . . . . . . . . . . . .42-43
EC/TDS Panel Mount Controllers . . . . . . . . . . . . . . . .44
pH Wall Mount Controllers . . . . . . . . . . . . . . . . . . . . . .45
ORP Wall Mount Controllers . . . . . . . . . . . . . . . . . . . .46
Combination Wall Mount Controllers . . . . . . . . . . . . . .47
Fertigation Wall Mount Controller . . . . . . . . . . . . . . . .48
Chemical Metering Pumps . . . . . . . . . . . . . . . . . . .48-49
RH/°C Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Level Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Acid Injection/pH Control Systems . . . . . . . . . . . . . .51-53
Complete Fertigation Systems . . . . . . . . . . . . . . . . . . .54
Warranty, Return &
Exchange Policies . . . . . . . . . . .55
Contact Us
HANNA instruments®, Inc.
Highland Industrial Park
584 Park East Drive,
Woonsocket, RI 02895
phone:
(800) 426-6287
fax:
(401) 765-7575
e-mail:
web:
[email protected] www.hannainst.com/usa
Testers
HI 98127 • HI 98128
Waterproof pH Testers
The pHep®4 and pHep®5 include features such as a dual-level LCD, battery level
indicator, replaceable pH electrode cartridge, stability indicator, automatic shut-off
and automatic calibration all in a floating, waterproof casing.
pHep®4
pHep®5
-2.0 to 16.0 pH
-2.00 to 16.00 pH
SPECIFICATIONS
Range
Resolution
Accuracy (@20°C/68°F)
0.1 pH
0.01 pH
±0.1 pH
±0.05 pH
Temp Range
-5.0 to 60.0°C / 23.0 to 140.0°F
Temp Accuracy
±0.5°C or ±1°F
Temp Resolution
0.1°C or 0.1°F
Auto Cal Buffers
4.01/7.01/10.01 or 4.01/6.86/9.18
pH Calibration
Automatic 1 or 2 points
Temp Compensation
Automatic
Battery Type
(4) 1.5V with BEPS (Battery Error Prevention System)
Battery Life
Approx. 300 hours of continuous use; auto-off after 8 min. of non-use
Environment
0 to 50°C (32 to 122°F); 100% RH
Dimensions
163 x 40 x 26 mm (6.4 x 1.6 x 1”)
Weight
Replaceable pH electrode
HANNA’s exclusive cartridge pH electrode.
Electrode replacement with the stainless steel
round connector means there are no pins to
bend or break during replacement.
85 g (3.0 oz.)
ORDERING INFORMATION
ACCESSORIES
HI 98127 (pHep®4) is supplied complete with
protective cap, electrode removal tool, batteries
and instructions.
HI 73127 pH electrode
HI 7004M pH 4.01 buffer solution, 250 mL
HI 70004P pH 4.01, (25) 20 mL sachets
HI 77400P pH 4 & 7, (10) 20 mL sachets, 5 ea.
HI 70007P pH 7.01, (25) 20 mL sachets
HI 70010P pH 10.01, (25) 20 mL sachets
HI 70300L Storage solution, 500 mL
HI 98128 (pHep®5) is supplied complete with
protective cap, electrode removal tool, batteries
and instructions.
Renewable cloth junction
When the cloth junction becomes dirty
from routine testing, simply pull out 3
mm (1/8”) to rejuvenate the electrode.
HI 98107
pHep® pH Tester with 2 point calibration
• Easy-to-read LCD
• 2-Point fast and accurate calibration
• 1700 hours of battery life
The Original pHep® pH tester set the standard for pH measurement. With 0.1 pH
accuracy and 2 point calibration this ergonomic tester is an inexpensive and
accurate solution for busy labs. Each instrument in the pHep® family comes with a
protective cap that can be used as a measurement vessel. These testers are the
standard in quick, on-the-spot pH testing.
ORDERING INFORMATION:
SPECIFICATIONS
HI 98107 (pHep®) is supplied with protective cap, calibration screwdriver, batteries
and instructions.
Range
Resolution
ACCESSORIES:
HI 73106 Spare electrode for HI 98107
HI 70004P pH 4.01 buffer solution,
(25) 20 mL sachets
HI 70007P pH 7.01, buffer solution,
(25) 20 mL sachets
(25) 20 mL sachets
HI
HI
HI
HI
HI
7004M pH 4.01 buffer solution, 250 mL
70300M Electrode storage solution, 250 mL
7061M Cleaning solution, 250 mL
pH Calibration
HANNA instruments Agricultural Products Catalog
®
5th
Edition
0.0 to 14.0 pH
0.1 pH
±0.1 pH
Manual 2 points
Battery Type
(4) 1.5V
Battery Life
Approx. 1700 hours of continuous use
Environment
0 to 50°C (32 to 122°F); max. 95% RH
Dimensions
75 x 41 x 23 mm (7.9 x 1.8 x 1”)
Weight
4
pHep® (HI 98107)
78 g (2.7 oz)
With Great Products, Come Great Results.™
HI 98103 (Checker®1)
SPECIFICATIONS
Range
Resolution
pH Calibration
Battery Type
Battery Life
Environment
Dimensions (meter only)
Weight
®
Checker 1 pH Tester
•
•
•
•
Easy-to-read LCD
High accuracy with 0.01 pH resolution
2-point fast and accurate calibration
Usable with virtually any electrode
that shares the same connector
• 3000 hours of battery life
• Full pH range: 0.00 to 14.00 pH
HI 98103 (Checker®1) is supplied complete
with HI 1270 combination pH electrode, 2 x 1.5V
batteries and instructions.
At the cost of just a few rolls of litmus paper, you can have the
industry's best pocket-sized pH tester. Unlike other pH testers,
the pH electrode of the Checker® can be interchanged with any
pH electrode of different size and shape that has the same
connector. The Checker® is fast, accurate, lightweight and with
3000 hours of battery life you don't have to worry about frequent
battery replacement.
HI 981408
0.00 to 14.00 pH
0.01 pH
±0.2 pH
Manual 2 points
(2) 1.5V AA
0 to 50°C (32 to 122°F); max. 95% RH
66 x 50 x 25 mm (2.6 x 2 x 1”)
70 g (2.5 oz)
Testers
HI 98103
ACCESSORIES
HI
HI
HI
HI
HI
HI
HI
1270 pH electrode, screw connector
1207 pH electrode, screw connector
1208 pH electrode, BNC connector
70300L Storage solution, 500 mL
Growers Field Checker®
pH Stick Meter with
User-replaceable Electrode
•
•
•
•
•
Shock-resistant casing
Replaceable electrode
Renewable cloth junction
Water-resistant housing
Runs on AA batteries
The pH Gro’Chek® is an ideal meter for use
anywhere liquid nutrient feeding is used.
The rugged sensor was designed for
mixing and incorporates a renewable cloth
junction. The water and shock-resistant
casing stands up to even harsh greenhouse environments.
SPECIFICATIONS
HI 981408 (pH Gro’Chek®)
Range
Resolution
pH calibration
Battery Type
Battery Life
0.0 to 14.0 pH
0.1 pH
±0.2 pH
Manual 1 point
(2) 1.5V AA
0 to 50°C (32 to 122°F);
Environment
max. 95% RH
Dimensions (meter only) 86 x 94 x 33 mm (3.4 x 3.7 x 1.3”)
Weight
150 g (5.3 oz)
Direct Sample pH Tester
•
•
•
•
•
Take measurements directly on the sample
High accuracy with 0.01 pH resolution
2-point fast and accurate calibration
Full 0.00 to 14.00 pH range
Lightweight and
pocket sized
The Growers Field Checker® (HI
98103GC) allows the user to determine the
pH of fruit and plant tissue in the field with
just a few drops of sap or juice. If your sample does not contain sufficient liquid, add an
equal portion of deionized water to extract
the sample pH. Growers Field Checker®
works with you to obtain superior crops.
The Growers Field Checker® is supplied
with a flat tip pH probe which allows for
minimal liquid sample, soft carrying case,
pH 4 and 7 calibration solutions, deionized water sachet, 100 mL sample beaker
and screwdriver!
SPECIFICATIONS
HI 981408 is supplied complete with HI 1219 pH electrode, pH 7 buffer solution,
Range
Resolution
Calibration
Battery Type
Battery Life
Environment
Weight
ACCESSORIES
HI 77400P pH 4 & 7 buffer solution,
(10) 20 mL sachets, 5 ea.
(25) 20 mL sachets
HI 70000P Electrode rinse solution
(25) 20 mL sachets
HI 7061M Electrode cleaning solution,
250 mL
HI 1219 Double junction pH electrode
HI 98103GC (Growers Field Checker®)
0.00 to 14.00 pH
0.01 pH
±0.2 pH
Manual 2 points
2 x 1.5V AA
0 to 50°C (32 to 122°F); max. 95% RH
66 x 50 x 25 mm (2.6 x 2 x 1”)
70 g (2.5 oz)
www.hannainst.com/usa
5
Testers
HI 98120 • HI 98121
pH/ORP and ORP Waterproof Testers
• HANNA’s exclusive cartridge pH and ORP electrode
Electrode replacement with the stainless steel round connector means there
are no pins to bend or break during replacement.
• Renewable cloth pH junction
When the cloth junction becomes dirty from routine testing,
simply pull out 3 mm (1/8”) to rejuvenate the electrode. (HI 98121)
•
•
•
•
•
Automatic temperature compensation
Automatic calibration (HI 98121)
Automatic shut-off
Dual-level LCD
“Direct Contact” temperature probe
(HI 98121)
HI 98120 is a waterproof ORP and temperature meter while HI 98121 measures pH, ORP and temperature. The
housing of these testers have been completely sealed against humidity and are designed to float.
The stainless steel encapsulated temperature sensor on these models facilitates faster and more accurate
temperature measurement.
SPECIFICATIONS
Range
Resolution
Replaceable ORP
electrode cartridge
Replaceable pH
electrode cartridge
HI 98120
HI 98121
ORP: ±1000 mV;
Temperature: -5.0 to 60.0°C or 23.0 to 140.0°F
pH: -2.00 to 16.00; ORP: ±1000 mV;
Temperature: -5.0 to 60.0°C or 23.0
ORP: 1 mV; Temperature: 0.1°C or 0.1°F
pH: 0.01; ORP: 1 mV; Temperature: 0.1°C or 0.1°F
ORP: ±2 mV; Temperature: ±0.5°C or ±1°F
pH: ±0.05; ORP: ±2 mV;
Temperature: ±0.5°C or ±1°F
Factory calibrated
pH: 1 or 2 points with 2 sets of memorized buffers
(pH 4.01/7.01/10.01 or pH 4.01/6.86/9.18);
ORP: Factory calibrated
-
Automatic for pH
Calibration
HI 98120 is supplied complete with protective cap, electrode removal tool, batteries and
instructions.
HI 98121 is supplied complete with protective cap, electrode removal tool, batteries and
instructions.
Temp. Compensation
Battery Type
Battery Life
Approx. 250 hours of continuous use; auto shut-off after 8 minutes of non-use
Environment
-5 to 50°C (23 to 122°F); 100% RH
Dimensions
163 x 40 x 26 mm (6.4 x 1.6 x 1”)
Weight
85 g (3.0 oz.)
ACCESSORIES
HI
HI
HI
HI
HI
73127 pH electrode (HI 98121)
73120 ORP electrode (HI 98120)
HI 98201
7021M ORP test solution (240 mV), 250 mL
7022M ORP test solution (470 mV), 250 mL
7020M 200/275 mV test solution, 250 mL
7091M Reducing solution, 250 mL
7092M Oxidizing solution, 250 mL
SPECIFICATIONS
ORP Oxidation
Reduction Potential
Portable Tester
• Clog-resistant cloth
junction
• Platinum electrode
• Covers full ORP range
• Rugged housing
In certain applications, ORP is used to
determine the effects of soil compaction
and the viability of the soil to maintain the
proper level of oxygen.
6
HI
HI
HI
HI
HI
Range
Resolution
Battery Type/Life
Environment
Dimensions
Weight
ORP (HI 98201)
±999 mV
1 mV
±5 mV
(4) 1.5V/Approx. 700 hours continuous use
0 to 50°C (32 to 122°F); 95% RH
175 x 41 x 23 mm (7.9 x 1.6 x 0.8”)
78 g (2.7 oz.)
HI 98201 (ORP) is supplied complete with protective cap, batteries
and instructions.
ACCESSORIES:
HI
HI
HI
HI
73201 Spare electrode for ORP to be replaced by authorized technical personnel only
7020M 200/275 mV test solution, 250 mL
7091M Reducing solution, 250 mL
7092M Oxidizing solution, 250 mL
®
HI 70004P pH 4.01, (25) 20 mL sachets
HI 70007P pH 7.01, (25) 20 mL sachets
HI 70010P pH 10.01, (25) 20 mL sachets
HI 77400P pH 4 & 7, (10) 20 mL sachets, 5 ea.
5th
Edition
Testers
HI 98311 • HI 98312
Waterproof EC/TDS/
Temperature Testers
HANNA instruments® continues the tradition of innovation with the
new DiST®5 and DiST®6. For this new series, we have included
all the features you have asked for such as a replaceable
graphite electrode, adjustable TDS ratio, temperature in °C or °F,
automatic temperature compensation with adjustable b, battery
level indicator, stability indicator, automatic shut-off, and automatic calibration all in a floating, waterproof casing. These 3-in-1
testers are unmatched in EC/TDS/ Temperature measurement!
DiST®5 (HI 98311)
DiST®6 (HI 98312)
EC: 0 to 3999 μS/cm; TDS: 0 to 2000 ppm;
Temperature: 0.0 to 60.0°C or 32.0 to 140.0°F
EC: 0.00 to 20.00 mS/cm; TDS: 0.00 to 10.00 ppt;
EC: 1 μS/cm; TDS: 1 ppm;
Temperature: 0.1°C or 0.1°F
EC: 0.01 mS/cm; TDS: 0.01 ppt;
EC: ±2% F.S.; TDS: ±2% F.S.;
EC: ±2% F.S.; TDS: ±2% F.S.;
SPECIFICATIONS
Range
Resolution
Accuracy(@20°C/68°F)
EC/TDS Calibration
EC/TDS Conv. Factor
Temp. Compensation
Battery Type
Battery Life
Environment
Dimensions
Weight
Automatic 1 point
Adjustable from 0.45 to 1.00
Automatic, BETA (β) is adjustable from 0.0 to 2.4%/°C
Approx. 100 hours of continuous use; auto shut-off after 8 minutes of non-use
0 to 50°C (32 to 122°F); 100% RH
163 x 40 x 26 mm (6.4 x 1.6 x 1”)
85 g (3.0 oz.)
ACCESSORIES:
HI 98311 (DiST®5) is supplied complete with
protective cap, batteries, probe removal tool
and instructions.
HI
HI
HI
HI
HI
HI
HI
HI 98312 (DiST®6) is supplied complete with
protective cap, batteries, probe removal tool
and instructions.
73311 Spare probe
70030P 12.88 mS/cm calibration solution, (25) 20 mL sachets
70031P 1413 μS/cm calibration solution, (25) 20 mL sachets
70032P 1382 ppm calibration solution, (25) 20 mL sachets
70038P 6.44 ppt calibration solution, (25) 20 mL sachets
73128 Probe removal tool
Original DiST® Series
• Automatic temperature compensation
• Graphite sensors
• Simple calibration
EC and TDS Testers
The Original DiST® family of testers are reliable
pocket-sized instruments that provide quick and
accurate readings at an affordable price. The graphite
sensors of these meters offer better repeatability since
they do not oxidize and Automatic Temperature
Compensation (ATC) assures that all readings are
corrected to compensate for the effects of temperature.
DiST® 1 and DiST® 2 measure TDS, while DiST®3 and
DiST®4 measure conductivity.
SPECIFICATIONS DiST®1 (HI 98300/HI 98301)
DiST 2® (HI 98302) DiST®3 (HI 98303) DiST®4 (HI 98304)
Range
Resolution
0 to 1999 ppm (mg/L)
1 ppm (mg/L)
0.00 to 10.00 ppt (g/L)
0.01 ppt (g/L)
0 to 1999 μS/cm
1 μS/cm
0.00 to 19.99 mS/cm
0.01 mS/cm
±2% F.S.
±2% F.S.
±2% F.S.
±2% F.S.
Accuracy(@20°C/68°F)
TDS Factor
Calibration Solution
Calibration
Temp. Compensation
Battery Type/Life
Environment
Dimensions/ Weight
0.65/0.5
HI 70032P/HI 70442P
0.5
HI 70038P
HI 70031P
Manual 1 point through trimmer
Automatic from 0 to 50°C (32 to 122°F)
(4)1.5V/Approx. 150 hours of continuous use
0 to 50°C (32 to 122°F); max. 95% RH
175 x 41 x 23 mm (7.9 x 1.8 x 1”)/78 g (2.7 oz)
ACCESSORIES
HI 98300, HI 98301, HI 98302,
HI 98303 and HI 98304 are supplied with
protective cap, batteries and instructions.
HI 7030M 12.88 mS/cm@25°C cal solution, 250 mL
HI 70030P 12.88 mS/cm@25°C cal sol., (25) 20 mL sachets
HI 7031M 1413 μS/cm @ 25°C cal solution, 250 mL
HI 70031P 1413 μS/cm @ 25°C cal. kit (25) 20 mL sachets
HI 7032M 1382 ppm@25°C cal solution, 250 mL
HI
HI
HI
HI
HI
HI 70039P/HI 70030P
70032P 1382 ppm @ 25°C cal. kit, (25) 20 mL sachets
70038P 6.44 ppt @ 25°C cal. kit, (25) 20 mL sachets
7039M 5000 μS/cm @25°C cal. solution, 250 mL
70039P 5000 μS/cm @ 25°C cal. kit, (25) 20 mL sachets
7
Testers
HI 981410
SPECIFICATIONS
EC, Floating Stick Meter
with User-replaceable Electrode
Resolution
•
•
•
•
•
HI 981410 (EC Gro’Chek)
Range
Water Resistant
Automatic Calibration
Automatic Temperature Compensation
Ideal for Mixing Fertilizer
ppm Model Available for TDS (HI 981409)
The EC Gro’Chek® is ideal for use anywhere liquid nutrient feeding is used. The rugged sensor was designed for mixing, while
the water and shock resistant casing stands up to even harsh
greenhouse environments. The EC Gro’Chek® utilizes AA batteries and has an auto shut-off after 5 minutes for long battery life.
0.00 to 10.00 mS/cm
0.01 mS/cm
±2% F.S.
Battery Type/Life
Environment
0 to 50°C (32 to 122°F); 100% RH
Dimensions
89 x 94 x 33 mm (3.4 x 3.7 x 1.3”)
Weight
150 g (5.8 oz.)
HI 981410 (EC Gro’Chek) is supplied with HI 1220 interchangeable TDS
probe, 1500 ppm calibration solution sachet, batteries and instructions.
ACCESSORIES
HI
HI
HI
HI
7061M Electrode cleaning solution, 250 mL
1220 Conductivity probe, L: 240 mm, DIN connector
HI 98331 Soil Test
HI 983311
Direct Soil Conductivity
and Temperature Tester
EC/TDS/Temperature Tester
• Dual level LCD
• Probe can be used
as a stirrer
• HOLD button to
freeze display
• Auto shut-off
• Automatic temperature
compensation
• Penetration probe
• Lightweight and portable
The HI 98331 is a special pocket
tester designed to directly measure
soil conductivity and temperature.
With an incorporated sensor in the
penetration probe, readings are
automatically temperature compensated. Conductivity range
can be calibrated at one point
and is designed to be calibrated
in liquid.
SPECIFICATIONS
Range
Resolution
To perform simple and fast EC, TDS and
Temperature measurements in places
with a high percentage of humidity,
HANNA instruments® offers the Aqua
Dip. With only two operation buttons, the
Aqua Dip allows an immediate and precise response.
Aqua Dip is factory calibrated and offers
total protection against humidity which
makes Aqua Dip ideal for analysis in the
field.
HI 98331
Two models are available:
Conductivity: 0.00 to 4.00 mS/cm (dS/m); Temperature: 0.0 to 50.0°C
Conductivity: 0.01 mS/cm; Temperature: 0.1°C
Temp. Compensation
Calibration
Probe
Battery Type
Environment
Dimensions
Weight
Conductivity: ±0.05 mS/cm (0.00 to 2.00 mS/cm),
±0.30 mS/cm (2.00 to 4.00 mS/cm); Temperature: ±1°C
Automatic, Temperature coefficient (β) fixed @ 2%/°C
Manual 1 point
HI 73331 122 mm (4.5”) penetration
4 x 1.5V
0 to 50°C
163 x 40 x 26 mm (6.4 x 1.6 x 1.0”)
100 g (3.5 oz)
ACCESSORIES
73331 Direct soil penetration conductivity probe
7031M 1413 μS/cm (1.4 mS/cm) @25°C calibration solution, 250 mL
7031L 1413 μS/cm (1.4 mS/cm) @25°C calibration solution, 500mL
731326 Calibration screwdrivers (20)
®
HI 983311/5 with 0.5 TDS factor
HI 983311 (Aqua Dip)
Resolution
EC: 0 to 3999 μS/cm; TDS: 0 to 2000 ppm;
Temperature: 0.0 to 60.0°C
EC: 1 μS/cm; TDS: 1 ppm; Temperature: 0.1°C
EC/TDS: ±2% F.S.; Temperature: ±0.5°C
TDS Factor
Temp. Compensation
Battery Type/Life
Environment
Dimensions
Weight
0.5 (HI 983311/5) or 0.7 (HI 983311/7)
Automatic with β=2.1%/°C
(2) 1.5V AAA/Approx. 180 hours continuous use
0 to 50°C (32 to 122°F); 100% RH
94 x 38 x 440 mm (3.7 x 1.5 x 17.3”)
200 g (7.8 oz.)
Range
HI 98331 (Soil Test) is supplied with HI 73331 penetration conductivity probe, (4) 1.5V batteries,
calibration screwdriver and instructions.
8
•
•
SPECIFICATIONS
HI
HI
HI
HI
Aqua Dip
HI 983311 (Aqua Dip) is supplied with batteries and instructions.
5th
Edition
Combo
Testers
HI 98129 • HI 98130
pH/Conductivity/TDS Waterproof Tester
Replaceable pH electrode cartridge
The Combo features an easy-to-replace pH electrode has an extendable cloth junction. The
sturdy, snap-in connector means there are no pins to bend or break.
High accuracy
The graphite conductivity electrode provides greater accuracy because it cannot be contaminated by salt deposits in the solution. The exposed temperature sensor provides fast
response times, and guarantees accurate temperature compensated readings.
The HI 98129 and HI 98130 Combo waterproof testers offer high accuracy pH, EC/TDS
and temperature measurements with a large easy-to-read, dual-level LCD and automatic shut-off. pH and EC/TDS readings are automatically compensated for the effects of
temperature (ATC). The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (β). Fast, efficient, accurate and portable, the Combo
incorporates all the features asked for and more!
SPECIFICATIONS
Range
Resolution
Combo (HI 98129)
Combo (HI 98130)
pH: 0.00 to 14.00; EC: 0 to 3999 μS/cm; TDS:
0 to 2000 ppm; Temperature: 0.0 to 60.0°C or
32.0 to 140.0°F
pH: 0.00 to 14.00; EC: 0.00 to 20.00 mS/cm;
TDS: 0.00 to 10.00 ppt; Temperature: 0.0 to
60.0°C or 32.0 to 140.0°F
pH: 0.01; EC: 1 μS/cm; TDS: 1 ppm;
pH: 0.01; EC: 0.01 mS/cm; TDS: 0.01 ppt;
pH Calibration
EC/TDS Calibration
EC/TDS Conv. Factor
Temp Comp.
Battery Type
Battery Life
Environment
Dimensions/Weight
pH: ±0.05; EC/TDS: ±2% F.S.; Temperature: ±0.5°C or ±1°F
1 or 2 points with 2 sets of memorized buffers
Automatic 1 point
pH: automatic; EC/TDS: automatic, BETA (β) is adjustable from 0.0 to 2.4%/°C
Approx. 100 hrs of continuous use; auto shut-off after 8 minutes of non-use
0 to 50°C (32 to 122°F); 100% RH
163 x 40 x 26 mm (6.4 x 1.6 x 1”)/85 g (3.0 oz.)
ACCESSORIES
HI 98129 (Combo) is supplied with protective cap,
electrode removal tool, batteries and instructions.
HI 73127 Replaceable pH electrode
HI 70004P Cal. kit (pH 4.01, 20 mL, 25 pcs.)
HI 77400P pH 4 & 7 buffer solution, (10) 20 mL sachets, 5 ea.
HI 70007P pH 7.01 buffer solution, (25) 20 mL sachets
HI 70010P pH 10.01 buffer solution, (25) 20 mL sachets
HI 98130 (Combo) is supplied with protective cap,
electrode removal tool, batteries and instructions.
HI
HI
HI
HI
HI
HI
HI
70038P 6.44 ppt @ 25°C cal. kit, (25) 20 mL sachets
70030P 12880 mS/cm @ 25°C cal. kit, (25) 20 mL
70300M Storage solution, 250 mL
HI 98601 HYGROCHECK
Relative Humidity Tester
Now growers can have accurate readings in a pocket sized
tester! The Hygrocheck’s large LCD can be seen from any
angle. Housed in rugged ABS plastic, the Hygrocheck uses
HANNA instruments® Thin Film Polymer Capacitor Sensor.
SPECIFICATIONS
HI 98601 (Hygrocheck)
Range
0.1% RH
±3% F.S.
Battery Type/Life
•
•
•
•
Large LCD
Pocket sized
Common sense construction
No conversions necessary
10.0 to 90.0% RH
Resolution
Environment
0 to 50°C (32 to 122°F); 95% RH
Dimensions
175 x 41 x 23 mm (7.9 x 1.6 x 0.8”)
Weight
78 g (2.7 oz.)
HI 98601 (Hygrocheck) is supplied with protective cap, batteries, soft carrying
case and instructions.
9
Testers
HI 151
Plant Stress
Ideal soil temperature is a constant 70°F
for most plants.You should take readings
during peak sunlight hours.
Stainless Steel, Folding Penetration
Probe Thermometer with CAL-CHECK™
Factory Calibration
Certificates
• Ergonomic and
easy to carry
• Large LCD
• Cal-Check™ feature
• Auto shut-off
• °C model available
Your thermometer will be calibrated
against a NIST standard and a certificate
will be issued.
HANNA’s Exclusive
Cal-Check Feature
The Checktemp® 4 gives you practical solutions to temperature
measurement for food service. As you unfold the stainless
steel probe, the Checktemp® 4 automatically turns ON and
immediately performs a calibration test. This unique HANNA
feature, Cal-Check™, provides you the security of knowing
you have accurate measurements. Cal-Check™ lets you
know if your battery level is too low or if your thermometer
requires re-calibration.
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Type/Life
Environment
Dimensions
Weight
HI 151 (Checktemp®4)
-58.0 to 428°F
0.1°F (-58.0 to 199.9°F, 1°F (200 to 428°F)
±0.8°F/±1% F.S. (outside)
Stainless Steel, penetration; 117 x 3.5 mm (6.75 x .187”)
(1) 1.5V/Approx. 25,000 hours continuous use
0 to 50°C (32 to 122°F); 95% RH
165 x 50 x 20 mm (6.5 x 2.0 x 0.8’’)
100 g (3.6 oz.)
HI 151-01 (°F) is supplied with 1.5V AAA
battery, wrist strap & instruction manual.
HI 151-001 (°F) is supplied with factory
calibration certificate, 1.5V AAA battery, wrist
strap & instruction manual.
How do you know when the reading on
any thermometer is correct? You could
make an ice point or slurry. Even then
there could be several degrees difference
in the real and the theoretical or perceived
temperatures. With our exclusive CALCHECK™ feature, you do not need to
waste time preparing for and making
these tests, CAL-CHECK™ can do it for
you. You can check the accuracy and
deviation of your thermometer at any time
during its life. This way, you are always
sure about the accuracy of your readings
and if necessary, can manually compensate for any deviation in calibration.
HI 98510
Checktemp®1: Thermometer
with Remote Probe
•3-foot probe cable
•Calibration check™ feature (CAL-CHECK™)
•Long battery life
•°C model available
This highly accurate thermometer is equipped with HANNA’s unique calibration device
which allows the user to ensure that the instrument is calibrated accurately. The 3-foot
cable is ideal for checking temperature in hard to reach places.
HI 98510 (Checktemp®1)
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Type/Life
Environment
Dimensions
Weight
-58.0 to 302.0°F
0.1°F
±0.5°F (-4 to 194°F) / ±1°F (outside)
stainless steel, 160 x dia 3 mm (6.3 x dia 0.1’’), with 1 m (3.3’) cable
1.5 V AAA / approx. 3 years of use
0 to 50°C (32 to 122°F); RH max 95%
106 x 58 x 19 mm (4.2 x 2.3 x 0.7’’)
80 g (2.8 oz.) - meter only
ACCESSORIES
HI 98510 (Checktemp® 1 °F) is supplied
complete with battery and instructions.
HI 740024 Base for Checktemp® 1
HI 98510-01 (Checktemp® Dip °F) is supplied complete with weighted probe with 3 m
(10’) cable, battery and instructions.
10
®
5th
Edition
HI 145
Thermometer with
Stainless Steel Probe
Soil Thermometer
•
•
•
•
• Stainless steel probe
• Calibration Check feature
(CAL-CHECK™)
• Long battery life
This highly accurate thermometer is equipped with
HANNA’s unique calibration device which allows
the user to ensure that the instrument is calibrated
accurately. The Checktemp® offers better accuracy
than glass thermometers, features a large LCD
and stainless steel 105mm (4.13”) probe.
HI 98502 (Checktemp® °F) is supplied with penetration
probe, protective cap, battery and instructions.
T-shaped with easy-to-read display
Available with 5” or 12” probe
°C model available
Cal-Check™ feature
The HI 145 series was
designed to measure
soil temperature
quickly and accurately
up to depths of 12
inches. Equipped with a calibration
check feature, the user can be assured that each
reading is accurate. The T-shaped design and large LCD make
the HI 145 easy to spot measure or leave in place.
HI 145-01 with 125 mm (4.9'') probe is supplied with battery
and instructions.
HI 145-30 with 300 mm (11.8'') probe is supplied with battery
and instructions.
A Factory Calibration Certificate is
available. Ask your sales associate.
SPECIFICATIONS
HI 145
Range
Range
Resolution
Accuracy
Probe
Battery Type/Life
Environment
Dimensions
Weight
-58.0 to 428°F
HI 98502 (Checktemp® °F)
Resolution
0.1°F (-58.0 to 199.9°F, 1°F (200 to 428°F)
-58.0 to 302.0°F
0.1°F (58.0 to 199.9°F); 1°F (200 to 302°F)
±0.5°F (-4 to 194°F) / ±1°F (outside)
Fixed, stainless steel, 105 mm x dia 3 mm (4.1'' x dia 0.1''), (penetration)
(1) 1.5V/ approx. 3000 hours continuous use
0 to 50°C (32 to 122°F); RH max 95%
66 x 50 x 25 mm (2.6 x 2.0 x 1.0’’)
Accuracy
±0.5°F (-4 to 194°F), ±0.4% F.S. (outside)
SPECIFICATIONS
Testers
HI 98502 Checktemp®
Probe
Battery Type/Life
HI 145-01),
5'' Stainless Steel (H
HI 145-30)
12'' Stainless Steel (H
(1) 1.5V/Approx. 10,000 hours continuous use
Environment
0 to 50°C (32 to 122°F); 95% RH
Dimensions
HI 145-01: 92 x 165 x 38 mm (3.6 x 6.5 x 1’’)
HI 145-30: 92 x 340 x 38 mm (3.6 x 13.4 x 1.5’’)
Weight
65 g (2.4 oz.)
HI 147 Checkfridge™
Temperature Monitor with Magnetic Backing &
Remote Thermistor Sensor on a 1-Meter Cable
•
•
•
•
Magnetic backing
Cal-Check™ feature
Large easy-to-read display
°C model available
A Factory Calibration Certificate is
available. Ask your sales associate.
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Type/Life
Environment
Dimensions
Weight
HI 147 is the ideal thermometer when
you need accurate, reliable internal temperature monitoring from the outside. The
HI 147 incorporates HANNA’s unique
Cal-Check™ feature which allows the user
to calibrate the thermometer internally. A
low battery warning “ERR” message
completes the HI 147’s rich features.
HI 147 (Checkfridge™)
-58.0 to 302.0°F
0.1°F (-20.0 to 199.9°F); 1°F (200 to 302°F)
±0.5°F (-4 to 194°F)/±1°F (outside)
Fixed, stainless steel, 40 x 5 mm (1.5 x .187''), 1 m silicon cable
1.5V AAA/ approx. 3 years
0 to 50°C (32 to 122°F); RH max 95%
93 x 39 x 31 mm (3.7 x 1.5 x 1.2’’)
HI 147-01 (Checkfridge™°F) is supplied with battery and instructions.
11
Portable Meters
HI 99121
Direct Soil pH and Temperature Kit
with Special Electrode
•
•
•
•
Specialized electrode
High accuracy
Fast response
The HI 99121 kit has been designed to address the question of correct and rapid
measurement of pH directly in soil. Every item in this kit has been made to facilitate
measurements in the field without compromising accuracy. With HI 99121 you can test
the pH of soil directly or after preparation of a diluted sample. In order to measure the
pH directly, the kit includes a plastic auger to perforate the ground.
The HI 1292D pH electrode has been designed for direct soil measurement. It has a
conic, rugged tip and can be directly inserted in moist or soft soil. The electrode incorporates a temperature sensor right near the tip to enable it to measure and compensate for the temperature quickly.
For higher degrees of accuracy, or for stony ground where the electrode may be damaged, use the specially made HI 7051M soil preparation solution. This solution is included in the package to help you measure pH more precisely by diluting a sample of the
soil in it.
The dual-level LCD shows the pH value from -2 to 16 with 0.01 resolution. It also displays
the temperature on the secondary level at the same time. With a menu-driven custom
microprocessor, the user is helped with clear prompts during operation and calibration.
SPECIFICATIONS
Compost Temperature
HI 99121
Range
pH: -2.00 to 16.00; Temperature: -5.0 to 60.0°C/23.0 to 221.0°F
Resolution
pH: 0.1; Temperature: 0.1°C/0.1°F
pH: ±0.02; Temperature: ±0.5°C up to 60°C, ±1°C (outside)/±1.0°F up
to 140°F, ±2°F (outside)
pH Calibration
Automatic 1 or 2 points with 2 sets of memorized buffers (pH 4.01, 7.01,
10.01 or 4.01, 6.86, 9.18)
Temp. Compensation
Battery Type/Life
Automatic, -5 to 105°C (23 to 221°F)
Maintain a minimum pile temperature of 131°F for 3
days to destroy weed seeds or plant pathogens.
Seed Beds
Proper soil temperature for seed germination allows
for higher sprouting in seed beds.
(3) 1.5V AA/Approx. 1500 hours of continuous use;
auto-off after 8 min. of non-use
Environment
0 to 50°C (32 to 122°F); 100% RH
Dimensions
150 x 80 x 36 mm (5.9 x 3.1 x 1.4'')
Weight
Pounds of Aluminum Sulfate to Lower the
Soil pH per 10 sq. ft.
210 g (7.4 oz.)
Present pH
HI 99121 is supplied complete with HI 1292D pH electrode, ground auger, HI 7051M soil preparation solution, pH 4 and pH 7 buffer sachets, HI 700663 and HI 700664 electrode cleaning solutions,
batteries, rugged carrying case and instructions.
ACCESSORIES
HI 1292D pH electrode for soil measurement,
with internal temperature sensor and DIN
connector
HI 7004L pH 4.01 buffer solution, 500 mL
HI 70004P pH 4.01 sol., (25) 20 mL sachets
HI 70007P pH 7.01, sol., (25) 20 mL sachets
HI 7071 Electrolyte solution, (4) 30 mL
HI 7051M Soil preparation solution, 250 mL
HI 721319 Ground auger
HI 700663P Cleaning solution for inorganic
soil deposits, (25) 20 mL sachets
HI 700664P Cleaning solution for organic
soil deposits, (25) 20 mL sachets
HI 710007 Shockproof rubber boot, blue
HI 710008 Shockproof rubber boot, orange
Desired pH
8.0
1.8
2.4
3.3
4.2
4.8
7.5
1.2
2.1
2.7
3.6
4.2
7.0
.06
1.2
2.1
3.0
3.6
.06
1.5
2.4
2.7
6.0
5.5
5.0
4.5
6.5
lbs. to add
6.5
Reduce Rate 1/3 for Sandy Soil
Pounds of Sulfur to Lower
the Soil pH per 10 sq. ft.
Present pH
Desired pH
8.0
1.8
2.4
3.3
4.2
4.8
7.5
1.2
2.1
2.7
3.6
4.2
7.0
.06
1.2
2.1
3.0
3.6
.06
1.5
2.4
2.7
6.0
5.5
5.0
4.5
6.5
lbs. to add
6.5
Increase Rate 1/2 for Clay Soil
12
®
5th
Edition
Portable Meters
HI 9026
pH/ORP Meter with Calibration Check™
•
•
•
•
•
•
•
•
•
•
Electrode monitoring
7 memorized buffers for calibration
Custom calibration with two custom buffers
Display hold and memory storage
Real time clock for accurate calibration monitoring
User-selectable calibration reminder
Extended pH and temperature ranges
Measures in °C or °F
Backlit, dual-level LCD
Waterproof
Calibration Check™ System
Clean Electrode
Each time pH calibration is performed, the meter internally compares the new calibration with the one previously stored. When this
comparison indicates a significant difference, the clean message
blinks on the LCD to advise the user that the pH electrode may
need to be cleaned and another calibration will need to be performed.
Expired Calibration
The instrument is provided with a real time clock (RTC) in order to
monitor the time elapsed since the last pH calibration. The RTC is
reset every time the meter detects a calibration time-out. The CAL
tag will start blinking to warn the user that the meter should be calibrated.
Electrode Condition
HI 9026 is an advanced pH/ORP meter specifically designed to
provide affordable and very precise results under harsh agricultural conditions. The meter also features a backlit display for
clear readings in the darkest environments.
The HI 9026W display features a bar graph
which displays the status of the electrode after
calibration. The bargraph remains active for 12
hours after calibration, then only the frame is
shown on the display.
81 to 100% Life
In addition, the user can program 2 custom buffer values, in
order to best fit the characteristics of the sample.
HI 9026 is housed in a waterproof casing and can also be used
with ORP electrodes.
61 to 80% Life
41 to 60% Life
It comes complete with HI 1230B pH electrode and HI 7662
temperature probe to provide automatically compensated
measurements.
SPECIFICATIONS
Resolution
HI 9026 is supplied complete with HI 1230B pH electrode, HI 7662
temperature probe, pH 4 and pH 7 buffer sachets, 100 mL plastic beaker,
Range
Calibration Check™
21 to 40% Life
1 to 20% Life
0% Life
HI 9026
pH: -2.00 to 16.00; mV: ±699.9 to ±1999;
Temperature: -20.0 to 120.0°C/-4.0 to 2482.0°F
pH: 0.01; mV: 0.1, 1; Temperature: 0.1°C/0.1°F
pH: ±0.01; mV ±0.2, ±1; Temperature: ±0.4°C/±0.8°F
Check of the electrode status during calibration
Automatic, 1 or 2 point with 7 memorized buffer values (pH 1.68, 4.01,
6.86, 7.01, 9.18, 10.01, 12.45); + 2 custom buffers
ACCESSORIES
pH Calibration
HI 1230B pH electrode, gel filled, PEI body, BNC connector, 1 m cable
HI 3230B ORP electrode, gel filled, PEI body, BNC connector, 1 m cable
HI 7662 Temperature probe
HI 76405 Electrode holder
HI 70300L Electrode storage solution, 500 mL
Temp Comp
Automatic or manual, -20 to 120°C (-4°F to 248°F)
pH Electrode
HI 1230B, double junction, PEI body, gel filled, BNC connector
and 1 m cable (included)
Temperature Probe
HI 7669 with 1 m (3.3’) cable (included)
Input Impedance
1012 Ohm
Battery Type/Life
(4) 1.5V AA / approx. 500 hours of continuous use (without backlight);
auto-off after 20 minutes of non-use (can be disabled)
Environment
0 to 50°C (32 to 122°F); 100% RH
Dimensions
196 x 80 x 60 mm (7.7 x 3.1 x 2.4’’)
Weight
500 g (1.1 lb.)
13
Portable Meters
HI 9025
pH/ORP/Temperature Meter
•
•
•
•
Specialized Electrode
High Accuracy
Fast Response
Automatic Temperature Compensation
The HI 9025C measures pH, temperature and ion concentration and ORP in the mV
range all in a rugged, waterproof casing. The Auto-Instruction feature guides the user
step-by-step through the calibration process with graphic symbols. Unlike conventional microprocessor pH meters that offer only the standard pH buffer solutions of 4.01,
7.01 and 10.01 for calibration, these meters also allow calibration at the important NBS
(NIST) buffers of 6.86 and 9.18. Because the electrode requires a certain amount of
time to stabilize between buffers, the meter will display the READY symbol only when
the electrode has stabilized. The powerful HI 9025C will allow 1 or 2-point calibration
using any of the 5 memorized buffers.
SPECIFICATIONS
HI 9025
pH: 0.00 to 14.00; mV: ±399.9 to ±1999;
Temperature: 0.0 to 100.0°C/32.0 to 212.0°F
Range
Resolution
HI 9025 is supplied complete with HI 1230B pH electrode, HI 7669/2W
temperature probe, pH 4 and pH 7 buffer sachets, 100 mL plastic beaker,
pH Calibration
pH: ±0.01; mV: ±0.2, ±1; Temperature: ±0.4°C/±0.8°F
7.01, 9.18, 10.01); offset calibration: ±1 pH; slope calibration: 70 to 108%
Temp. Compensation
pH Electrode
Automatic or manual, -5 to 105°C (23°F to 221°F)
Temperature Probe
HI 7669/2W with 1 m (3.3’) cable (included)
Environment
1012 Ohm
(4) 1.5V AA / approx. 500 hours of continuous use;auto-off after 20 minutes of
non-use (can be disabled)
0 to 50°C (32 to 122°F); 100% RH
Dimensions
196 x 80 x 60 mm (7.7 x 3.1 x 2.4’’)
Input Impedance
Battery Type/Life
Weight
500 g (1.1 lb.)
SPECIFICATIONS
HI 8424NEW
Resolution
Accuracy
pH Calibration
Temp. Compensation
pH Electrode
Temperature Probe
Input Impedance
10.01); offset calibration: ±1 pH; slope calibration: 75 to 110%
Automatic -20 to 120°C (-4°F to 248°F) or manual
1012 Ohm
Battery Life
(1) 9V/approx. 150 hours of continuous use; auto-off after 20 minutes
of non-use (can be disabled)
Environment
Dimensions
Weight
0 to 50°C (32 to 122°F); 100% RH
164 x 76 x 45 mm (6.5 x 3.0 x 1.8’’)
180 g (6.3 oz.)
HI 8424NEW is supplied with HI 1230B pH electrode, HI 7662 temperature probe, calibration and
cleaning solutions, battery, protective case and instructions.
ACCESSORIES
HI 1230B pH electrode, gel filled, PEI
body, BNC connector
HI 1332B ORP electrode, gel filled, PEI
body, BNC connector
HI 7662 Temperature probe
HI 76405 Electrode holder
14
HI 70300L Electrode storage sol, 500 mL
HI 710022 Spare protective case
®
5th
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
1230B pH electrode, gel filled, PEI body, BNC, 1 m cable
3230B ORP electrode, gel filled, PEI body, BNC, 1 m cable
7669/2W Temperature probe
76405 Electrode holder
7004L pH 4.01 buffer solution, 500 mL
70300L Electrode storage solution, 500 mL
HI 8424NEW
pH: -2.00 to 16.00; mV: ±699.9 to ±1999;
Temperature: -10.0 to 120.0°C/-4.0 to 248.0°F
pH: ±0.01; mV ±0.2, ±1; Temperature: ±0.4°C/±0.8°F
Range
ACCESSORIES
Edition
pH/mV/°C Meter with ATC and
Automatic Calibration
• Extended mV range for ORP
• Push button calibration
• Enhanced version of one
our most popular meters!
The HI 8424NEW portable pH meter
is one of the most popular pH
meters on the market.
With the HOLD function, readings
can be frozen on the display to
be logged manually. Also, temperature can be displayed in
°C or °F and users can
enable or disable the Auto-off
feature, the acoustic signal and
the back-lit display. In addition, HI 8424NEW
indicates on the display the buffer values used for the last calibration.
Portable Meters
HI 993310
Direct Measurement of Soil
Activity & Solution Conductivity
• Measures EC in soil, irrigation water
and fertilizer mixes
• Easy to calibrate
SPECIFICATIONS
HI 993310
Range
EC: 0.00 to 19.99 mS/cm; activity: 0.00 to 1.00
Resolution
EC: 0.01 mS/cm; activity: 0.01
EC: ±2% F.S. (0 to 15.00 mS/cm; excluding probe error)
Calibration
Manual, 1 point
Automatic, 0 to 50°C (32°F to 122°F), β=2%/°C
Temp. Compensation
Probes
Now it is possible to use one instrument to accurately and quickly
measure EC in many places where the fertilizer is mixed, such as
in the irrigation water and directly in the soil. This meter is easy to
operate and gives fast, accurate measurements. HI 993310 is
equipped with an alarm LED that automatically turns on if the soil
is too dry, or nutritive substances such as potassium or nitrogen
are lacking. Also included in the meter is the ability to measure
salt activity.
HI 76305 for direct soil measurements with stainless steel body, conic tip,
built-in temperature sensor and 1 m (3.3') cable (included).
HI 76304 for EC measurements in solution with plastic body, built-in
temperature sensor and 1 m (3.3') cable (included)
Battery Type/Life
9V / approx. 100 hours of continuous use
Environment
0 to 50°C (32 to 122°F); 95% RH non-condensing
Dimensions
185 x 82 x 52 mm (7.3 x 3.2 x 2.0'')
Weight
275 g (9.7 oz.)
HI 993310 is supplied complete with HI 76304 EC probe for solutions,
HI 76305 stainless steel probe for direct soil measurements, HI 7051M soil
preparation solution, HI 721319 ground auger, battery, rugged carrying
case and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
HI
HI
76305 Stainless steel probe for direct soil measurement
76304 EC probe for measurement of solution and soil sample
7030L 12880 μS/cm calibration solution, 500 mL
7051M Soil preparation solution
721319 Ground auger
710009 Shockproof rubber boot, blue
710010 Shockproof rubber boot, orange
HI 99300 • HI 99301
EC/TDS/Temperature Meters
• Measure EC/TDS/temperature with one probe
• Automatic calibration
HI 99300 and HI 99301 are two innovative meters that combine
measurements of conductivity, TDS (Total Dissolved Solids) and
temperature. The housing is water-resistant and rated for IP 67
conditions. All settings and calibration data remain in memory
even when changing batteries.
SPECIFICATIONS
Range
HI 99300 is supplied complete with HI 76306 probe with 1 m (3.3’)
cable, batteries, rugged carrying case and instructions.
HI 99301 is supplied complete with HI 76306 probe with 1 m (3.3’)
cable, batteries, rugged carrying case and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
HI
HI
76306 EC/TDS/temperature probe with 1 m (3.3’) cable
Resolution
HI 99300
HI 99301
EC: 0 to 3999 μS/cm; TDS: 0 to
2000 ppm (mg/L); Temperature:
0.0 to 60.0°C/32.0 to 140.0°F
EC: 0.00 to 20.00 mS/cm; TDS: 0.00 to
10.00 ppt (g/L); Temperature: 0.0 to
60.0°C/32.0 to 140.0°F
EC: 1 μS/cm; TDS: 1 ppm (mg/L);
Temperature: 0.1°C/0.1°F
EC: 0.01 mS/cm; TDS: 0.01 ppt (g/L);
Temperature: 0.1°C/0.1°F
EC/TDS: ±2% F.S.; Temperature: ±0.5°C/±1°F
TDS Factor (CONV)
Adjustable from 0.45 to 1.00 with 0.01 step (default 0.50)
Calibration
Temp. Compensation
Probe
Battery Type/Life
Automatic, 1 point at 1382 ppm
(CONV 0.5) or at 1500 ppm (CONV
0.7) or at 1413 μS/cm (others)
Automatic, 1 point at 6.44 ppt
(CONV 0.5) or at 9.02 ppt (CONV 0.7)
or at 12880 μS/cm (others)
Automatic, 0 to 60°C (32 to 140°F) with β adjustable from 0.0 to 2.4%/°C
with 0.1% step
HI 76306 EC/TDS/temperature, with DIN connector and 1 m (3.3’) cable (included)
(4) 1.5V AAA / approx. 500 hours of continuous use
Environment
0 to 50°C (32 to 122°F); RH max 100%
Dimensions
143 x 80 x 38 mm (5.6 x 3.1 x 1.5'')
Weight
210 g (7.4 oz.)
15
Portable Meters
HI 98360
EC/TDS/NaCl/°C Meter
with Auto Endpoint
• Waterproof
• PC compatible
• 4-ring probe
HI 98360 is a rugged waterproof conductivity meter, which combines versatility and reliability with ease of use.
This portable instrument is equipped with an auto-ranging feature
and allows the user to measure EC and TDS with the resolution
that best fits with the sample.
The "Auto Endpoint" feature makes HI 98360 the ideal meter for
field measurements: after entering this mode, the instrument will
automatically freeze stable readings on the LCD.
The included HI 76309/1.5 probe is a potentiometric 4-ring probe
for EC/TDS and temperature measurements. The HI 76309/1.5
features a PVC body, stainless steel sensors and 1.5 m (4.9')
screened cable.
SPECIFICATIONS
HI 98360
EC
TDS
NaCl
Temperature
0.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to
2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0
mS/cm, up to 500.0 mS/cm (actual EC)*
0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L),
150 to 1499 ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to
100.0 g/L, up to 400.0 g/L (actual TDS)*
0.0 to 400.0%
9.9 to 120.0°C**
Resolution
0.01 μS/cm, 0.1 μS/cm, 1 μS/cm, 0.01 mS/cm,
0.1 mS/cm
0.01 ppm (mg/L), 0.1 ppm (mg/L), 1 ppm (mg/L),
0.01 g/L, 0.1 g/L
0.1%
0.1°C
Accuracy
±0.5% of reading
±0.5% of reading
±0.5% of reading
±0.4°C
Range
EC: Automatic, 1 point with 6 memorized values (84, 1413, 5000, 12880 and 11180 μS/cm); NaCl 1 point, with HI 7037 calibration solution (not included);
Temperature: 2 point at 0 and 50°C (32 to 122°F)
Calibration
Temp. Compensation
Automatic or manual, 0 to 60°C (32 to 140°F) (can be disabled to measure actual EC and TDS)
Temp. Coefficient
Adjustable from 0.00 to 6.00%/°C (EC and TDS only)
TDS Conversion Factor
Data Logging
Up to 250 samples
Probe
HI 76309/1.5 with 1.5 m (4.9’) cable (included)
Power Supply
(4) 1.5V AA batteries (included), approx. 200 hours of continuous use, or 12 Vdc input; auto-off after 5 minutes of non-use (can be disabled)
Environment
0 to 50°C (32 to 122°F); 100% RH
Dimensions
196 x 80 x 60 mm (7.7 x 3.1 x 2.4'')
Weight
500 g (1.1 lb.)
* with temperature compensation function disabled
HI 98360 is supplied with HI 76309/1.5 probe with 1.5 m (4.9’) cable, batteries, rugged carrying case and instructions.
** using the proper probe
ACCESSORIES
HI 76309/1.5 4-ring conductivity probe with
1.5 m (4.9’) cable
HI 76310 4-ring conductivity probe with Pt sensor
and 1 m (3.3’) cable
HI 7030L 12880 μS/cm calibration solution, 500 mL
16
HI
HI
HI
HI
HI
®
5th
Edition
HI
HI
HI
HI
HI
7037L 100% NaCl standard solution, 500 mL
710005 115 Vac/12 Vdc power adapter
92000 Windows® compatible application software
920011 Interface for PC connection
Portable Meters
HI 9813 Series
Waterproof pH/EC/TDS/°C
Meters for Growers
• Fast response probe
• Available with °C display
• Exclusive Clean & Cal feature
(HI 9813-6)
Order the HI 9813 according to your needs:
HI 9813-0 allows you to measure pH, EC (conductivity) and
TDS with just one instrument! The meter has a pH measurement
range that covers the full spectrum. Suited for hydroponics,
greenhouses, farming, and ground water applications.
HI 9813-5 offers all of the features if the HI 9813 with the addition
of temperature measurement in the °C scale.
HI 9813-6 is the most complete model in the HI 9813 series.
The HI 9813-6 includes all of the features of the previous models
and HANNA’s new F.S.T. technology. With this special security
system, if the meter encounters incorrect readings, the instrument doesn’t display values close to pH 7, but close to pH 4,
making the problem clear to the user.
To allow maximum confidence in your measurements, the meter
is equipped with two LEDs and a “Check” button.
When pressing this button, after immersing the electrode in the
proper solution, HI 50021P (Cal-Check solution), one of the
LED’s will light up to indicate the status of the meter. The green
LED (“OK”) indicates the probe is working correctly,
while the red LED (“C&C” Clean & Cal) indicates the electrode
needs attention.
SPECIFICATIONS
Range
HI 9813-0
pH: 0.0 to 14.0; EC: 0.00 to 4.00 mS/cm;
TDS: 0 to 1999 ppm (mg/L)
pH: 0.1; EC: 0.01 mS/cm; TDS: 1 ppm (mg/L);
Temperature: 0.1°C
pH: 0.1; EC: 0.01 mS/cm; TDS: 1 ppm (mg/L);
Temperature: 0.1°C
pH: ±0.1; EC/TDS: ±2% F.S.
pH: ±0.1; EC/TDS: ±2% F.S.; Temperature: ±0.5°C
pH: ±0.1; EC/TDS: ±2% F.S.; Temperature: ±0.5°C
Calibration
Manual at 1 point (all parameters except temperature)
Temp. Compensation
Automatic, 0 to 50°C (32 to 122°F) with ß=2%/°C (EC/TDS only)
Probe
HI 9813-6
pH: 0.1; EC: 0.01 mS/cm;
TDS: 1 ppm (mg/L)
Resolution
HI 9813-5
pH: 0.0 to 14.0; EC: 0.00 to 4.00 mS/cm;
pH: 0.0 to 14.0; EC: 0.00 to 4.00 mS/cm;
TDS: 0 to 1999 ppm (mg/L); Temperature: 0.0 to 60.0°C TDS: 0 to 1999 ppm (mg/L); Temperature: 0.0 to 60.0°C
0.56 to 0.72 ppm = 1 μS/cm
HI 1285-0, pH/EC/TDS, 1 m cable (included)
HI 1285-5, pH/EC/TDS/T, 1 m cable (included)
Battery Type/Life
(1) 9V / approximately 150 hours of continuous use
Environment
0 to 50°C (32 to 122°F); 100% RH
Dimensions
165 x 75 x 45 mm (6.9 x 2.9 x 1.8'')
Weight
180 g (6.3 oz.)
ACCESSORIES
HI 9813-0 is supplied complete with pH/EC/TDS probe HI 1285-0, 1 m
cable, pH 7 calibration solution (1 x 20 mL), 1.41 mS/cm and 1500 ppm (1
each) calibration solution, cleaning solution (2 pcs.), blue protective case,
battery and instructions.
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI 9813-5 is supplied complete with pH/EC/TDS/T HI 1285-5 1 m cable,
pH 7 calibration solution (1 x 20 mL), 1.41 mS/cm and 1500 ppm (1 each)
calibration solution, cleaning solution (2 pcs.), blue protective case, battery and instructions.
HI 9813-6 is supplied complete with pH/EC/TDS/T HI 1285-6 probe with
1 m (3.3’) cable, pH 7, 1.41 mS/cm and 1500 ppm calibration solution (20
mL each), cleaning solution (2 pcs), HI 50021 test solution (2 pcs), blue
protective case, battery and instructions.
HI 1285-6, pH/EC/TDS/T, with Clean & Cal,
1 m (3.3’) cable (included)
1285-6 pH/EC/TDS/T probe, with Clean & Cal, 1 m (3.3) cable
1285-5 pH/EC/TDS/T probe, 1 m (3.3’) cable
1285-0 pH/EC/TDS probe, 1 m (3.3’) cable
77100P pH 7 and 1413 μS/cm calibration solution (20) 20 mL sachets, 10 ea.
77200P pH 7 and 1500 ppm calibration solution (20) 20 mL sachets, 10 ea.
77400P pH 4 and 7 calibration solution (10) 20 mL sachets, 5 ea.
50021P Clean & Cal solution (25) 20 mL sachets
70300L Electrode storage solution, 500 mL
7061L Cleaning solution, 500 mL
710022 Blue protective case
17
Portable Meters
HI 991301
pH/EC/TDS/Temperature 4-in-1 Megameter
• Waterproof
• 4 parameters—1 probe!
This multi-parameter instrument tests for 4 of the most important factors in the growing
environment. Calibration is performed at the touch of a button with memorized pH and
EC buffers. Accuracy is ensured with Automatic Temperature Compensation and the
advanced sensor material which completely eliminates polarization and oxidation problems. Beta factor and TDS ratios are user-selectable as is the ability to read in °C or °F.
SPECIFICATIONS
Range
HI 991301 is supplied complete with pH/EC/TDS/T HI 1288 probe, with
1 m (3.3’) cable, batteries, rugged carrying case and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
HI
HI
HI
Resolution
pH Calibration
EC/TDS Calibration
1288 pH/EC/TDS/T probe
70030P 12880 μS calibration solution (25) 20 mL sachets
70038P 6.44 ppt calibration solution (25) 20 mL sachets
77100P 1413 μS/pH 7 calibration solution (20) 20 mL sachets, 10 ea.
77200P 1500 ppm/pH 7 calibration solution (20) 20 mL sachets, 10 ea.
77300P 1382 ppm/pH 7 calibration solution (20) 20 mL sachets, 10 ea.
77400P pH 4; pH 7 calibration solution (10) 20 mL sachets, 5 ea.
HI 991301
pH: 0.00 to 14.00; EC: 0.00 to 20.00 mS/cm; TDS: 0.00 to 10.00 ppt (g/L);
pH: 0.01; EC: 0.01 mS/cm; TDS: 0.01 ppt; Temperature: 0.1°C or 0.1°F
pH: ±0.01; EC/TDS: ±2% F.S.; Temperature: ±0.5°C or ±1.0°F
Automatic at 1 or 2 points with 2 sets of memorized standard buffers
(pH 4.01/7.01/10.01 or pH 4.01/6.86/9.18)
Automatic, 1 point at 6.44 ppt (CONV 0.5) or at 9.02 ppt (CONV 0.7)
or at 12880 μS/cm (others)
TDS Conv. Factor
Selectable 0.45 to 1.00 with 0.01 increments (default 0.50)
Temp. Compensation
pH: automatic; EC/TDS: automatic, BETA (β) is adjustable
from 0.0 to 2.4%/°C w/0.1 increments
Probe
HI 1288 pH/EC/TDS/T, DIN connector, 1 m (3.3’) cable (included)
Battery Type/Life
(4) 1.5V AAA/approx. 100 hrs of continuous use
Environment
Dimensions/Weight
0 to 50°C (32 to 122°F); 100% RH
150 x 80 x 36 mm (5.9 x 3.1 x 1.4”)/210g (7.4 oz.)
HI 9811-0 • HI 9811-5
pH, Conductivity to 6000 μS/cm and Temperature
• Water-resistant
• 1 probe for all parameters!
• 0.0 to 70.0°C temperature range
(HI 9811-5)
HI 9811-0 and HI 9811-5 are portable meters for field measurement of pH, conductivity and TDS. HI 9811-5 features additional temperature measurement in °C. These versatile instruments are ideal for use in agriculture. The rugged housing has been specifically designed to be easy to use in the field, while reducing the number of instruments
required for water quality analysis.
HI 9811-0 and HI 9811-5 are equipped with Automatic Temperature Compensation and
BEPS (Battery Error Prevention System) which alerts the user when low batteries could
affect the readings.
SPECIFICATIONS
Range
Resolution
Calibration
Temp. Compensation
HI 9811-0
HI 9811-5
pH: 0.0 to 14.0; EC: 0 to 6000 μS/cm;
pH: 0.0 to 14.0; EC: 0 to 6000
TDS: 0 to 3000 ppm (mg/L;
μS/cm; TDS: 0 to 3000 ppm (mg/L)
pH: 0.1; EC: 10 μS/cm;
pH: 0.1; EC: 10 μS/cm; TDS: 10 mg/L;
TDS: 10 mg/L
Temperature: 0.1°C
pH: ±0.1; EC/TDS: ±2% F.S.;
pH: ±0.1; EC/TDS: ±2% F.S.
Temperature: ±0.5°C
Manual at 1 point (all parameters except temperature)
Automatic 0 to 50°C with ß = 2% /°C (EC/TDS only)
0.5 mg/L = 1 μS/cm
HI 1285-0 pH/EC/TDS, 1 m cable
(included)
Probe
HI 1285-5 pH/EC/TDS/T, 1 m cable
(included)
Battery Type/Life
Environment
(1) 9V / approximately 150 hours of continuous use
0 to 50°C (32 to 122°F); 100% RH
Dimensions/Weight
165 x 75 x 45 mm (6.9 x 2.9 x 1.8'')/180 g (6.3 oz.)
18
®
5th
Edition
HI 9811-0 and HI 9811-5 are supplied complete with HI 1285-0 (-0) or
HI 1285-5(-5) probe with 1 m (3.3’) cable, pH 7 calibration solution, 1382
ppm and 1413 μS/cm calibration solutions (1 each), cleaning solution (2
pcs), blue protective case, battery and instructions.
ACCESSORIES
HI 1285-0 pH/EC/TDS probe, 1 m (3.3’) cable
HI 1285-5 pH/EC/TDS/T probe, 1 m (3.3’) cable
HI 7061L Cleaning solution, 500 mL
HI 77100P pH 7 and 1413 μS/cm calibration solution (20) 20 mL sachets, 10 ea.
HI 77300P pH 7 and 1382 ppm calibration solution (20) 20 mL sachets, 10 ea.
HI 77400P pH 4 and 7 calibration solution (10) 20 mL sachets, 5 ea.
Extended Range D.O.
Meter
• Water-resistant
• 4 parameters—1 probe!
The HI 9143 is designed for outdoor applications. Simple on-site calibration requires no
chemical solutions. Just expose the probe to air and press the CAL button. In a few
minutes, the meter is calibrated and ready to use. The HI 9143 measures and displays
O2 from 0 to 300%, 0 to 45 mg/L and temperature from 0 to 50 °C.
SPECIFICATIONS
Range
Resolution
HI 9143
O2: 0.00 to 45.00 mg/L; % Saturation O2: 0.0 to 300.0%;
O2: 0.01 mg/L; % Saturation O2: 0.1% F.S.; Temperature: 0.1°C
O2: ±1.5% F.S.; % Saturation O2: 1.5% F.S.; Temperature: ±0.5°C
Calibration
Temp. Compensation
Altitude Compensation
Salinity Compensation
Probe
Battery Type/Life
Automatic, in air, at 100%
Automatic, 0 to 50°C (32°F to 122°F)
0 to 1900 m, 100 m (328') resolution
0 to 40 g/L, 1 g/L resolution
HI 76407/4 polarographic, with 4 m (13') cable (included)
(4)1.5V AA/approx. 200 hours of continuous use;
auto-off after 4 hours of non-use; or input for 12 Vdc power adapter
Environment
Dimensions
Weight
ACCESSORIES
HI 9143 is supplied complete with D.O. probe HI 76407/4 with 4 m (13’)
cable, 2 spare membranes, electrolyte solution HI 7041S (30 mL), batteries, rugged carrying case and instructions.
HI
HI
HI
HI
HI 9142
Water-resistant D.O.
Meter
0 to 50°C (32 to 122°F); 100% max RH
196 x 80 x 60 mm (7.7 x 3.1 x 2.4'')
500 g (1.1 lb.)
76407/4 D.O. Probe with 4 m (13’) cable
7041S Refilling electrolyte solution (30 mL)
HI 710006 230 Vac/12 Vdc adapter
HI 76407A/P Replacement membrane (5 pcs)
HI 721317 Rugged carrying case
• Rugged and built to last
• Designed for field use
• Simple-to-use
Measurements in the field can subject instrumentation to the inclemency of weather.
Cold, rain, snow and dust associated with use in the field, can damage a meter, rapidly deteriorating its performance and life. HI 9142 is a rugged, waterproof meter that
solves these common problems of field use.
It is very simple to use: calibration is performed with HI 7040 zero oxygen solution, while
100% calibration is done in air.
There is no need to use chemical solutions or go through time consuming calibration
procedures. The polarographic probe (HI 76407/4) will take measurements accurate to
0.3 ppm in minutes and is supplied with a 4 m (13') cable that allows measurements to
be taken even in even hard to reach places.
For applications that require longer probe cables, the HI 76407/10 and HI 76407/20
probes with a 10 m (33') or 20 m (67') cable are available.
SPECIFICATIONS
Resolution
HI 9142 is supplied complete with HI 76407/4 D.O. probe with 4 m (13’) cable, 2 spare
membranes, HI 7041S electrolyte solution (30 mL), calibration screwdriver, batteries, rugged
carrying case and instructions.
ACCESSORIES
HI
HI
HI
HI
7040M Zero oxygen solution (230 mL)
HI
HI
HI
HI
7040L Zero oxygen solution (500 mL)
7041S Refilling electrolyte solution (30 mL)
76407A/P Replacement membrane (5 pcs)
721317 Rugged carrying case
Range
Calibration
Temp. Compensation
HI 9142
0.0 to 19.9 mg/L
0.1 mg/L
±1.5% F.S.
Manual at 1 or 2 points (zero and slope)
Automatic, 0 to 30°C
Probe
HI 76407/4 polarographic, with 4 m (13') cable
(included)
Battery Type/Life
(4)1.5V AA/approx. 500 hours of continuous use
Environment
Dimensions
Weight
0 to 50°C (32 to 122°F); 100% max RH
196 x 80 x 60 mm (7.7 x 3.1 x 2.4'')
500 g (1.1 lb.)
19
Portable Meters
HI 9143
Portable Meters
Shown with optional
HI 710008 rubber boot
HI 93640
HI 8564
Compact, Portable
Thermohygrometer
Relative Humidity &
Temperature Meter
• Large LCD
• Dual-temperature range
• Low-battery indicator
• Quick response time
• High accuracy
• Displays temperature
in °C and °F
The HI 93640 is a compact, portable and
versatile hygrometer with a convenient wrist
strap so you can monitor relative humidity
anywhere. The built-in thin-film capacitance
sensor assures accurate humidity measurements from 5 to 95% RH with a resolution of 0.1%.
SPECIFICATIONS
SPECIFICATIONS
HI 93640
Range
RH: 5.0 to 95.0%; Temperature: 0.0 to 60.0°C (32 to 140°F)
Resolution
RH: 0.1%; Temperature: 0.1°C; 1°F
RH: ±2%; Temperature: ±0.4°C; ±1°F (for 1 year, excluding
probe error)
Battery Type/Life
The HI 8564 portable, RH/ Temperature
meter uses a membrane keypad to
switch from RH readings to temperature
in °C or °F. The quick response time
and reliability of the meter makes it a valuable tool to the greenhouse professional.
Range
Resolution
RH Calibration
(1) 9V AA/approx. 100 hours continuous use
Environment
0 to 50°C (32 to 122°F); 98% max RH non-condensing
Dimensions
190 x 80 x 38 mm (7.5 x 3.1 x 1.54'')
Weight
HI 8564
RH: 10.0 to 95.0%; Temperature: 0.0 to 60.0°C (32 to 140°F)
RH Probe
Battery Type/Life
Environment
Dimensions
200 g (7.1 lb.)
probe error)
Manual 2 point through trimmer on RH probe
HI 70601/2 with built-in temperature sensor and 2 m (6.6’)
cable (included)
(1) 9V AA/approx. 100 hours of continuous use
190 x 80 x 38 mm (7.5 x 3.1 x 1.54'')
Weight
HI 93640 is supplied complete with probe sintered cap, battery and instructions.
ACCESSORIES
HI 8564 is supplied complete with HI 70601/2 RH probe with internal temperature sensor and 2 m (6.6’) cable, battery and instructions.
HI 710007 Blue shockproof rubber boot
HI 710008 Orange shockproof rubber boot
HI 710011 Probe sintered cap
HI 7102 Calibration chamber
HI 7111/P Spare saturation LiCl salts
for low humidity calibration (15 g, 6 pcs)
HI 7121/P Spare saturation NaCl salts
for high humidity calibration (33 g, 6 pcs)
HI 9065
Relative Humidity
/Temperature Meter
Professional Growers
•
•
•
•
200 g (7.1 lb.)
ACCESSORIES
HI
HI
HI
HI
70601/2 RH probe, 2 m (6.6’) cable
70601/5 RH probe, 5 m (16.5’) cable
7101 Calibration chamber
7111/P Spare saturation LiCl salts for
low humidity calibration (15 g, 6 pcs)
SPECIFICATIONS
Range
Water-resistant casing
High accuracy
Hold key
Displays temperature in
°C and °F
Resolution
RH Calibration
RH Probe
Battery Type/Life
Environment
Dimensions
Weight
HI 710001 Soft carrying case
HI 9065
RH: 5.0 to 95.0%; Temperature: 0.0 to 60.0°C (32 to 140°F) up
to 105°C (302°F) with HI 765 temperature probe
probe error)
Manual 2 point through trimmer on RH probe
HI 70605/2 with built-in temperature sensor and 2 m (6.6’)
cable (included)
(4) 1.5V AA/approx. 500 hours of continuous use
0 to 50°C (32 to 122°F); 100% max RH
196 x 80 x 60 mm (7.7 x 3.1 x 2.4'')
500 g (1.1 lb.)
HI 9065 is supplied complete with HI 70605/2 RH probe with internal temperature sensor and 2 m (6.6’) cable, battery, rugged carrying case and instructions.
ACCESSORIES
HI
HI
HI
HI
70605/2 RH probe, 2 m (6.6’) cable
70605/5 RH probe, 5 m (16.5’) cable
7111/P Spare saturation LiCl salts for
low humidity calibration (15 g, 6 pcs)
20
®
5th
Edition
HI 710010 Orange shockproof rubber
boot
HI 710001 Soft carrying case
Portable Meters
HI 97500
Portable Lux Meter for Rapid Light
Measurements in a Waterproof Case
•
•
•
•
Three measurement ranges
Light sensor attached to 1.5 meter coaxial cable
Rugged, waterproof case
Low-battery indicator
The HI 97500 portable Lux Meter from HANNA instruments® has been designed for
simplicity of use in taking rapid light measurements.
The HI 97500 is provided with a light sensor connected by a flexible coaxial cable which
allows remote, stable and optimum position measurement of light, without any interference
of the operator.
The meter makes it possible to choose among three measurement ranges by simply
pressing the RANGE key.
The HI 97500 Lux Meter is housed in a rugged waterproof case for trouble-free outdoor
measurements.
SPECIFICATIONS
Range
HI 97500
0.001 to 1.999 Klux; 0.01 to 19.99 Klux; 0.1 to 199.9 Klux
Resolution
0.001 Klux; 0.01 Klux; 0.1 Klux
Accuracy
Sensor
Battery Type/Life
±6% of reading ±2 digits
Human-eye-response silicon photodiode with 1.5 m coaxial cable (fixed)
9V AA/approx. 200 hours of continuous use; Auto-off after 7 minutes of non-use
Environment
0 to 50°C (32 to 122°F); 100% RH
Dimensions
164 x 76 x 45 mm (6.5 x 3.0 x 1.8'')
HI 97500 is supplied with battery, protective case and instructions.
Weight
Light Intensity
Plant Light Requirements
Quality of light is very important in the workplace, schools, greenhouses
and public buildings. Too little light (or luminous intensity) affects the
quantity and quality of performance of both people and crops.
HANNA's light meter uses special optic filters to match the spectral sensitivity of the human eye.
Light provides the energy source needed for plants to manufacture food (photosynthesis). The
amount of light is commonly measured in foot-candles (ft-c) or lux. Plants differ greatly in their
light intensity requirements. Indoor plants are often classified by the amount of light necessary for growth:
Luminous intensity is measured and reported in foot-candles (ft-c) or in
lux (lx). Light meters are commonly referred to as lux meters. One lux is
equal to one lumen per square meter and one foot-candle is equal to
one lumen per square foot. To convert measurements use the following
formulae:
•
Low (minimum 1.1 Klx, .8 to 2.1 preferred for
good growth)
•
Medium (minimum 1.1 to 1.6 Klx, 2.1 to
5.4 preferred)
•
High (minimum 1.6 to 10.8 Klx, 5.4 to
10.8 preferred)
•
Very high (minimum 10.8 Klx, 10.8+ preferred)
foot-candle = lux x 0.0929
lux = foot-candle x 10.764
HANNA's light measuring sensor is a photo diode that converts incident
light into an electronic signal that is read and displayed on the meters
LCD as Klx which is 1,000 lx. So multiply the reading by 92.9 to get the
measurement in foot candles.
Common Examples of Light Intensities
Full Moon
.001 Klx
1 lx
.0929 ft-c
Street Lighting
.01 Klx
10 lx
.929 ft-c
Workspace Lighting
.1 - 1 Klx
100 - 1,000 lx
9.29 - 92.9 ft-c
Surgery Lighting
10 Klx
10,000 lx
929 ft-c
Sunshine
100 Klx
100,000 lx
9,290 ft-c
180 g (6.3 oz.)
About 1.1 Klx for 12 hours per day are necessary
simply to maintain plant quality for one year
and at least 2.1 Klx for 12 hours per day are necessary for foliage plants to manifest any benefit
from fertilization.
While lack of sufficient light results in poor plant growth,
too much light can also be harmful. Shade plants cannot tolerate
excessively high light levels. When a plant receives too much direct light,
the leaves bleach or scald, sometimes dying. This often happens after
moving a plant outdoors in direct light. Any changes in light intensity should
be gradual.
21
Chemical Test Kits
HI 83900
Suction Lysimeter
• Perfect companion to the HI 83215
• Monitor soil composition right at the roots
• Easy to use
Available in 3 Lengths
The HI 83900 suction lysimeter is built with a porous ceramic cap
connected to a transparent tube for soil solution extraction. A
rubber capillary is inserted in the tube passing through a rubber
cap and reaching the ceramic tip.
The HI 83900 series lysimeter is an ideal tool for collecting soil
solution samples and then perform quantitative chemical analysis. In this way the operator can easily monitor the level of nutrients, such as ammonia, nitrate, phosphorous and potassium,
sulphate, calcium, magnesium.
HI 83900-30
30 cm (0.98’)
HI 83900-60
60 cm (1.97’)
The ceramic tip of the lysimeter can be used in all types of soil,
and it is made of sinterized material that does not react with nutrient elements. The soil solution, therefore, is not affected by the
chemical composition of the ceramic cap, and the test results
are always precise and reliable.
HI 83900-90
90 cm (2.95’)
1. Rubber cap
2. Soil solution
sampler tube
3. Porous ceramic
tip
4. 30 mL syringe
(pump)
5. Rubber suction
capillary
6. Finger clamp
The HI 83900 allows to extract a solution from the soil by creating a vacuum (negative pressure or suction) inside the sampler
tube, that exceeds the soil water tension. This will establish an
hydraulic gradient for the solution to flow through the porous
ceramic cap and into the lysimeter tube. Typically, a vacuum of
about -60 cb (centibar) should be drawn.
For better monitoring the soil solution composition throughout an
entire growth period of crops, at least two lysimeters should be
installed in the root zone of a representative plant, one at the
upper part and the other in the lower part of the root zone.
For better accuracy and repeatability of results, it is recommended to replicate the above described installation in at least two
more locations.
Use in conjuntion with our our HI 83215 on the opposite page.
22
HI 83900-30 is comprised of 30 cm (0.98’) tube sampler tube ending with porous ceramic tip,
capillary rubber tube with rubber cap and finger clamp, cleaning solution stater kit (120 mL bottle),
30 mL syringe and instruction manual.
ACCESSORIES
HI 83900-25 Cleaning solution kit, 500 mL
®
5th
Edition
Bench Photometers
HI 83215 Grow Master
Nitrogen, Phosphorus,
Potassium and Ammonia Meter
• Accurate
• 4 parameters in 1 meter
• Three ranges for
each parameter
• Easy to use
• Economical tests
HI 83215 is a practical instrument made to measure
nutrients commonly present in fertilizer-enriched
solutions. This convenient photometer measures
ammonia, phosphorus, nitrate and potassium in
three distinct ranges of low, medium and high concentrations. This way accuracy is maximized for each
nutrient and for every concentration.
Thanks to the low cost per test and simplicity of
operation, you no longer need to send off your
samples and wait for the results to come back.
Using the HI 83215, you can test the presence and
strength of nutrients right on the spot. This can translate
itself into a substantial savings and improved yield.
HI 83215 has been engineered to run on battery
power as well as the mains. The HI 83215 comes
complete with a 9-volt battery and a 12 VDC adapter.
Add to this the unit’s lightweight and you have a
bench/portable meter that is just at home in the field
as in the horticulturist’s lab.
PARAMETER SPECIFICATIONS
Test
Ammonia LR*
Ammonia MR*
Ammonia HR*
Nitrate LR
Nitrate MR
Nitrate HR
Phosphorus LR
Phosphorus MR
Phosphorus HR
Potassium LR
Potassium MR
Potassium HR
GENERAL SPECIFICATIONS
Light Source
Light Detector
Power Supply
Auto-off
Environment
Dimensions
Weight
HI 83215
Range
0.0 to 10.0 mg/L (ppm)
0.0 to 50.0 mg/L (ppm)
0 to 100 mg/L (ppm)
0.0 to 30.0 mg/L (ppm)
0 to 150 mg/L (ppm)
0 to 300 mg/L (ppm)
0.0 to 10.0 mg/L (ppm)
0.0 to 50.0 mg/L (ppm)
0 to 100 mg/L (ppm)
0.0 to 20.0 mg/L (ppm)
10 to 100 mg/L (ppm)
20 to 200 mg/L (ppm)
Method
Nessler
Nessler
Nessler
Cadmium Reduction
Cadmium Reduction
Cadmium Reduction
Amino Acid
Amino Acid
Amino Acid
Turbidimetric
Turbidimetric
Turbidimetric
HI 83215
3 tungsten lamps with narrow band interference filter
420/525/610 nm
4 Silicon Photocells
(2) 9V batteries or 12 VDC adapter
After 10 minutes of non-use
0 to 50°C (32 to 122°F); RH max 95% non-condensing
230 x 165 x 70 mm
640 g
Reagents**
HI 93715-01
HI 93715-01
HI 93715-01
HI 93728-01
HI 93728-01
HI 93728-01
HI 93706-01
HI 93706-01
HI 93706-01
HI 93750-01
HI 93750-01
HI 93750-01
* LR = Low Range
MR = Medium Range
HR = High Range
**All reagents with -01
final code are for 100
tests.
ACCESSORIES
HI 83215 is supplied complete with 4 measuring cuvets, batteries, 12
Vdc adapter and instructions. HI 83215K kit includes accessories for
HI 83215: rugged carrying case, 100 mL and 170 mL beaker, 60 mL and 5
mL syringes, 1 filter-holder and 25 filters, 100 mL cylinder, demineralizer
bottle, 2 pipettes, 1.5 mL spoon and active carbon for 50 tests
HI 731318 Tissue for wiping cuvets (4)
HI 731321 Spare measurement cuvets (4)
HI 731325 Cap for cuvets (4)
HI 83900-30 Lysimeter with 30 cm (0.98’) tube
Plant Nutrition
The three elements that are most needed
by plants are nitrogen (N), phosphorous
(P) and potassium (K). This is the reason
why they are called macronutrients and
should be given to plants.
Nitrogen is indispensable for the plant’s
life and is a key factor in fertilization.
Nitrogen allows the development of the
vegetative activity of the plant, in particular, causes lengthening of trunks and
sprouts and increases the production of
foliage and fruits. An excess of nitrogen
weakens the plants’ structure creating an
unbalanced relationship between the
leaves and the stalks. In addition, the
plant becomes less resistant to diseases.
Phosphorous is an important element
in the composition of DNA and RNA, the
regulators of the energetic exchange
(ATP & ADP), as well as the reserve
substances in seeds and bulbs. It
contributes to the formation of buds,
roots, blooming, and lignification.
A lack of phosphorous results in:
stifling of plant, slow growth, a reduction
of production, smaller fruits and a lower
expansion of the roots.
Even if Potassium is not a constituent of
important compounds, it plays a remarkable role in many physiological activities
like the control of cellular turgor and the
accumulation of carbohydrates. It increases
the size of fruits, their flavor, as well as
yielding a positive effect on the color and
fragrance of flowers. Potassium also
makes plants more resistant to disease.
23
Ion Specific Photometers
HI 95771
Chlorine Ultra High Range
Ion Selective Meter
•
•
•
•
The HI 95771 displays the last
time calibration was performed
so you may schedule routine calibrations - ideal for ISO and Good
Laboratory Practice environments.
0 to 500 mg/L
Perfect for fruit and vegetable washing
CAL CHECK™ calibration and verification
Simple to use
HI 95771 is a photometer developed to check chlorine dosing in disinfection processes with high concentrations of chlorine. Thanks to the extended range from 0 to 500
ppm, it is ideal for the food industry, such as in fruit and vegetable washing. HI 95771
also offers an additional range (0.00 to 5.00 ppm) for accurate measurements at lower
values, to help control the chlorine level before discharging the treated water.
SPECIFICATIONS
HI 95771 is supplied complete with 2 measuring cuvets, 9V battery and
instructions. HI 95771C kit includes the above HI 95771, rugged carrying case, tissue for wiping cuvets and Cal CheckTM standard.
ACCESSORIES
HI 95771-01 Reagents for 100 Chlorine Ultra High Range tests
HI 95771-03 Reagents for 300 Chlorine Ultra High Range tests
HI 95771-11 CAL CHECK™ standard cuvets (1 set)
HI 95771 ULTRA HR METER
Range
Resolution
Precision
Light Source
Light Detector
Power Supply
0 to 500 mg/L
1 mg/L (10 mg/L above 200 mg/L)
±2 mg/L to 100 mg/L
Tungsten lamp with narrow band interference filter @ 525 nm
Silicon Photocell
(1) 9V battery
Auto-off
After 10 min of non-use in measure mode; after 1 hour of non-use in
calibration mode
Environment
Dimensions
Weight
Method
180 x 83 x 46 mm (7.1 x 3.3 x 1.8”)
290 g (10 oz.)
Adaptation of USEPA 330.5 Method and Standard Methods 4500-Cl
“Peace of mind.” When performing measurements, you need to
know that the instrument you are using is right on. With HANNA’s
exclusive CAL CHECK™ feature you can now rest assured.
With HANNA’s exclusive CAL CHECK™ validation function users are
able to verify the performance of the instrument at any time. Taking just
a few short steps, the validation procedure is extremely user friendly and
ensures that the meter is properly calibrated. Just use the exclusive
HANNA ready-made, NiST traceable standards to verify the performance of the instrument and recalibrate if necessary. All instruments are
factory calibrated and the electronic and optical design minimizes the
need for frequent calibration.
HI 95734
HI 95721
Free and Total Chlorine
Meter with CAL CHECK™
Iron Meter with
CAL CHECK™
SPECIFICATIONS
Range
SPECIFICATIONS
HI 95734
HI 95721
Range
F: 0.00 to 10.00 mg/L; T: 0.00 to 10.00 mg/L
0.00 to 5.00 mg/L
Resolution
0.01 mg/L (0.10 mg/L above 3.50 mg/L)
Resolution
0.01 mg/L
Precision
±0.06 mg/L to 3.00 mg/L
Precision
±0.01 mg/L to 1.50 mg/L
Adaptation of USEPA 330.5 Method and Standard
Methods 4500-Cl
Method
Method
Adaptation of USEPA 315B Method and Standard
Methods 3500-Fe B
REAGENTS
REAGENTS
HI 93734-01 Powder reagents for 100 tests (Free or Total Chlorine)
HI 93734-03 Powder reagents for 300 tests (Free or Total Chlorine)
HI 95734-11 Cal CheckTM standard cuvets
HI 93721-01 Reagent kit for 100 tests
HI 93721-03 Reagent kit for 300 tests
HI 95721-11 Cal CheckTM standard
24
®
5th
Edition
HI 95717
HI 95706
Phosphate
Meter with
CAL CHECK™
Phosphorus
Meter with
CAL CHECK™
HI 95XXX series are supplied with cuvet(s),
9V battery and instructions.
ACCESSORIES
HI 710009
HI 710010
HI 721310
HI 731318
HI 731331
HI 731335
HI 93703-50
Blue rubber boot
Orange rubber boot
9V battery (10 pcs)
Tissue for wiping cuvets (4)
Glass cuvets (4)
Caps for cuvets (4 pcs)
Cuvet cleaning solution (250 mL)
GENERAL SPECIFICATIONS
HI 95XXX Series
Light Source
SPECIFICATIONS
HI 95717
0.0 to 30.0 mg/L (as PO43-)
Range
SPECIFICATIONS
Range
HI 95706
0.0 to 15.0 mg/L (as P)
Resolution
0.1 mg/L
Resolution
0.1 mg/L
Precision
±0.5 mg/L to 12.0 mg/L
Precision
±0.2 mg/L to 6.0 mg/L
Method
Adaptation of Amino Acid Method to the
Standard Methods for the Examination of
Water and Wastewater
Adaptation of Amino Acid Method to the
Standard Methods for the Examination of
Water and Wastewater
Method
REAGENTS
HI 95717-11 Cal CheckTM standard for
HI 93717-01 Reagents for 100 tests
HI 95706-11 Cal CheckTM standard for
•
•
•
•
•
Single and Dual Parameter
Ion Specific Meters
without CAL CHECK™
SPECIFICATIONS
Light Detector
Battery Life
Auto-off
Environment
Dimensions
Weight
Dimensions
Weight
180 x 83 x 46 mm
290 g (10 oz.)
HI 93XXX Series
0-150 mg/L (ppm)Mg
0-400 mg/L (ppm) Ca
Calmagite/470 nm
Oxalate
GENERAL SPECIFICATIONS HI 93XXX Series
Light Source
0 to 50°C (32 to 122°F);
RH max 95% non-condensing
Lightweight and portable
Quick and simple to use
Long battery life
Lab grade accuracy
Economical tests
Test & (Code)
Range
Method/Light Source Wavelength
Ammonia HR* (HI 93733)
0.0-50.0 mg/L (ppm)
Nessler/470 nm**
±0.5 mg/L ±5% of reading
Chlorine, Free & Total (HI 93734) 0.00-9.99 mg/L (ppm) (F. & T.)
DPD/555 nm
Copper HR (HI 93702)
0.00-5.00 mg/L (ppm)
Bicinchoninate/555 nm
Iron HR (HI 93721)
0.00-5.00 mg/L (ppm)
Phenantroline/470 nm
Manganese HR (HI 93709)
0.0-20.0 mg/L (ppm)
Periodate Oxidation/555 nm
Nickel LR* (HI 93740)
0.000-1.000 mg/L (ppm)
PAN/555 nm
Nitrate (HI 93728)
0.0-30.0 mg/L (ppm)
Cadmium Reduction/555 nm
Nitrite HR (HI 93708)
0-150 mg/L (ppm)
Ferrous Sulfate/ 585 nm
±4 mg/L ±4% of reading
Oxygen, Dissolved (HI 93732N)
0.0-10.0 mg/L (ppm)
Modified Winkler/470 nm
Phosphate HR (HI 93717)
0.0-30.0 mg/L (ppm)
Amino Acid/470 nm
Phosphorus (HI 93706)
0.0-15.0 mg/L (ppm)
Amino Acid/470 nm
Potassium (HI 93750)
0.00-50.0 mg/L (ppm)
Turbidimetric/470 nm
Sulfate (HI 93751)
0-150 mg/L (ppm)
Turbidimetric/470 nm
Zinc (HI 93731)
0.00-3.00 mg/L (ppm)
Zincon/585 nm
Calcium and Magnesium HR
(HI 93752)
Environment
* nanometers
REAGENTS
HI 93XXX Series
Light Detector
Battery Life
Auto-off
Tungsten lamp with narrow
band interference
filter @ 525 nm*
Silicon Photocell
(1) 9V battery
* LR = Low Range
HR = High Range
LED (light Emitting Diode)
Silicon Photocell
9V battery
180 x 83 x 46 mm
290 g (10 oz.)
** nanometers
HI 93XXX series are supplied with cuvet(s),
9V battery and instructions.
REAGENTS
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
(100 tests ea. unless otherwise noted)
93733-01 (HR) Ammonia
93734-01 Free & total Chlorine
93702-01 (HR) Copper
93721-01 (HR) Iron
93709-01 (HR) Manganese
93740-01 (LR) Nickel (50 tests)
93728-01 Nitrate
93708-01 (HR) Nitrite
93732-01 Dissolved Oxygen
93717-01 (HR) Phosphate
93706-01 Phosphorus
93750-01 Potassium
93751-01 Sulfate
93731-01 Zinc
93752-01 (HR) Magnesium and Calcium
25
Ion Specific Photometers
Monitoring Systems
HI 991401
pH/Temperature
Monitor Featuring
a Large, Backlit LCD
•
•
•
•
Waterproof
Stability indicator
Extra-large display
12 VDC power supply
Dual-level
Backlit LCD!
The waterproof pH indicator HI 991401 has been designed to meet the grower's need
for equipment suited to the aggressive environments found in agricultural and
hydroponics applications. Measurements are highly accurate and can be verified with
one or two point calibration. Low batteries and battery changes are no longer a problem
thanks to a 12 VDC power supply included with the meter. The electrode is interchangeable
and has been specially designed to address the needs of growers. Its design guarantees greater clogging resistance in fertilizer solutions with high concentrations of phosphate, nitrate, etc. This is a major improvement ensuring longer life for your electrode!
SPECIFICATIONS
Range
Resolution
pH Calibration
Temperature Compensation
Probes
Power Supply
HI 991401
pH: 0.0 to 14.0; Temperature: 0.0 to 60.0°C (32.0 to 140.0°F)
pH: 0.1; Temperature: 0.1°C (0.1°F)
pH: ±0.1; Temperature: ±0.5°C (±1°F)
Automatic 1 or 2 point with 2 sets of memorized buffers
(pH 4.01/7.01/10.01 or pH 4.01/6.86/9.18)
Automatic
HI 1293D pH electrode (incl.) and HI 1294 temperature probe (incl.)
12 VDC adapter (included)
12
Input Impedance
10 Ohm
Battery Life
Environment
Dimensions
Weight (meter only)
0 to 50°C (32 to 122°F); max. 95% RH
160 x 105 x 31 mm (6.3 x 4.1 x 1.2”)
190 g (6.7 oz)
HI 991401 is supplied complete
with HI 1293D pH electrode, fixed
temperature probe, pH 4 and pH 7
calibration solutions (20 mL each),
12 Vdc adapter and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
7004M pH 4.01 calibration solution, 250 mL
77400P pH 4 and pH 7 sachets (10) 20 mL sachets, 5 ea.
HI 981401N
pH Indicator with Large LCD
& Water Resistant Casing
The HI 981401N has been designed to meet the grower's need
for equipment suited to the aggressive environments found in
agricultural and hydroponics applications. The housing features
a molded eye which allows installation right above the sample to
be monitored. The electrode is interchangeable and the connector is well-protected behind a waterproof sheath. The meter
is supplied with a stainless steel probe, preventing potential
grounding problems and ensuring extended electrode life. The
gel-filled pH electrode guarantees greater clogging resistance in
fertilizer solutions with high concentrations of phosphate, nitrate, etc.
SPECIFICATIONS
HI 981401N
Range
0.0 to 14.0 pH
Resolution
pH Calibration
pH Electrode
Power Supply
Input Impedance
Environment
Weight
ACCESSORIES
HI 981401N is supplied complete with HI 1286 pH electrode, 12 Vdc
adapter, HI 1283 stainless steel grounding bar, pH 4 and pH 7 calibration
solutions (20 mL each), calibration screwdriver and instructions.
HI 7004M pH 4.01 calibration solution, 250 mL
26
®
5th
Edition
0.1 pH
±0.2 pH
Manual 1 point at pH 4 and 7
HI 1286 plastic body, double junc., PTFE membrane, with 2 m (6.6’) cable & BNC conn. (incl.)
1012 Ohm
0 to 50°C ; max. 100% RH
86 x 110 x 43 mm (3.4 x 4.3 x 1.7”)
150 g (5.3 oz)
HI 77400P pH 4 and 7 sachets (10) 20 mL
sachets, 5 ea.
HI 70300M Electrode storage solution, 250 mL
HI 7061M Electrode cleaning solution, 250 mL
®
EC/TDS/Temperature Monitors
with a Large Backlit LCD
• Waterproof
• Adjustable TDS ratio
• Adjustable β
Monitoring Systems
HI 993301 • HI 993302
Dual-level
Backlit LCD!
• Extra-large display
• 12 VDC adapter
The waterproof EC/TDS indicators HI 993301 and HI 993302 have been designed to
meet the Grower's need for equipment suited to the aggressive environments found in
agricultural and hydroponics applications. At startup, HI 993301 and HI 993302 perform
a self-check to assure proper working condition. These powerful instruments also feature a stability indicator and hold feature to prompt the user when to take the reading
and freeze the display for easy and accurate recording. Calibration and temperature
compensation is automatic, while the EC/TDS conversion factor and temperature coefficient factor (β) are user adjustable for application specific measurements.
SPECIFICATIONS
HI 993301
HI 993302
EC: 0 to 3999 μS/cm; TDS: 0 to
2000 ppm; Temperature: 0.0 to
60.0°C or 32.0 to 140.0°F
EC: 0.00 to 20.00 mS/cm; TDS: 0.00 to
10.00 ppt; Temperature: 0.0 to 60.0°C
or 32.0 to 140.0°F
EC: 1 μS/cm; TDS: 1 ppm;
EC: 0.01 mS/cm; TDS: 0.01 ppt;
EC: ±2% F.S.; TDS: ±2% F.S.;
EC: ±2% F.S.; TDS: ±2% F.S.;
EC/TDS Calibration
Automatic 1 point at 1413 μS/cm
Automatic 1 point at 12.88 mS/cm
Range
Resolution
EC/TDS Conv. Factor
Probe
Temp. Compensation
HI 7630 (included)
Automatic, BETA (β) is adjustable from 0.0 to 2.4%/°C
Power Supply
Environment
0 to 50°C (32 to 122°F); max 95% RH
Dimensions
160 x 105 x 31 mm (6.3 x 4.1 x 1.2”)
Weight (meter only)
190 g (6.7 oz.)
HI 993301 is supplied complete with HI 7630 EC probe, 1413 μS/cm
calibration solution (20 mL), 12 Vdc adapter and instructions.
HI 993302 is supplied complete with HI 7630 EC probe, 12.88 mS/cm
calibration solution (20 mL), 12 Vdc adapter and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
HI
HI
7030M 12.88 mS/cm calibration solution, 250 m
7031M 1413 μS/cm calibration solution, 250 mL
7032M 1382 ppm calibration solution, 250 mL
7038M 6.44 ppt, calibration solution, 250 mL
HI 983302N
®
EC Monitor Featuring a Large
LCD & Water Resistant Casing
The GRO’CHEK® EC monitor has been upgraded with a large,
easy-to-read LCD. The HI 983302N’s waterproof casing guarantees operation after accidental water exposure. The professional EC electrode gives accurate results every time.
SPECIFICATIONS
HI 983302N
Range
Resolution
0.00 to 9.99 mS.cm
0.01 mS.cm
±0.2% F.S.
Calibration
Temperature Comp.
Probe
Power Supply
Input Impedance
Environment
Weight
Automatic, 5 to 50°C (41 to 122°F) with β=2%/°C
1012 Ohm
0 to 50°C (32 to 122°F); max. 100% RH
86 x 110 x 43 mm (3.4 x 4.3 x 1.7”)
215 g (7.6 oz)
TDS Versions Available
HI 983301N w/0.7 conv. fac.
HI 983301N/5 w/0.5 conv. fac.
HI 983302N is supplied with HI 7632 probe, 12 Vdc adapter, 1413 μ/cm
calibration solution (20 mL), calibration screwdriver and instructions.
ACCESSORIES
HI 70031P 1413 μS/cm calibration solution, (25) 20 mL sachets
27
Monitoring Systems
HI 983304
Water-Resistant Conductivity
Meter for Demineralized Water
with Visual Alarm
HI 983304 is specifically designed for use in demineralized and
deionized water.
When placed at the output of any demineralization system, the
visual alarm will be activated as soon as the demineralizing
equipment is exhausted.
This exclusive feature will ensure maximum system efficiency
with minimum investment.
The meter measures from 0 to 19.99 μS/cm. and has a built-in
3½-digit LCD. HI 983304 is supplied with an HI 7631/2 direct
2-pin probe with a 2 m (6.6') cable and a ½" thread for flowthru mounting. This probe is also equipped with a temperature
sensor to automatically compensate measurements against
temperature changes from 5 to 50°C (41 to 122°F). When operating in the measurement mode, HI 983304’s red LED will alert
the user as soon as the reading is 1 μS/cm over the setpoint.
HI 983304 is supplied complete with HI 7631/2 probe, calibration
screwdriver, 12 Vdc adapter and instructions.
SPECIFICATIONS
HI 983304
Range
Resolution
Calibration
Setpoint
Alarm
EC Probe
Power Supply
Environment
Dimensions
Weight
0.00 to 19.99 μS/cm
0.01 μS/cm
±2% F. S.
Manual, 1 point through trimmer
Automatic, 5 to 50°C (41 to 122°F) with ß=2.4%/°C
1.00 to 5.00 μS/cm
LED blinks when the measured valueis higher than 1.00 μS/cm of the
setpoint
HI 7631/2 with 2 m (6.6’) cable and ½" thread for in-line installation (incl.)
12 Vdc adapter (included)
0 to 50°C (32 to 122°F); RH max 100%
86 x 110 x 43 mm (3.4 x 4.3 x 1.7’’)
215 g (7.6 oz.)
HI 983303 • HI 983306 • HI 983307 • HI 983308
Water-Resistant EC/TDS Meters with Visual Alarm
Water-resistant conductivity/TDS meters are HANNA
instruments®‘ reply to requests of accurate process
monitoring at highly affordable costs with low maintenance.
Four different models are available. These EC and
SPECIFICATIONS
HI 983303
Range
Resolution
Calibration
Calibration Solution
Temp. Compensation
Set Point
0 to 1990 μS/cm
10 μS/cm
Alarm
Probe (included)
Power Supply
Environment
Dimensions
Weight
TDS meters can be installed anywhere quickly and
easily with the casings molded hook. The specially
designed casing is stable and will not roll off a table.
The 12 Vdc power supply allows continuous monitoring
over extended periods of time.
HI 983306
ACCESSORIES
HI 983303 is supplied complete with HI 7634/2 probe, 12 Vdc adapter, 1413 μS/cm calibration
solution (20 mL), screwdriver and instructions.
HI
HI
HI
HI
HI 983306 is supplied complete with HI 7634/2 probe, 12 Vdc adapter, 1382 ppm calibration
HI 983307 is supplied complete with HI 7632/2 probe, 12 Vdc adapter, 5000 μS/cm calibration
HI 983308 is supplied complete HI 7632/2 probe, 12 Vdc adapter, 6.44 ppt calibration
28
®
HI 983307
HI 983308
0 to 1990 ppm (mg/L)
0.00 to 9.99 mS/cm
0.00 to 9.99 ppt (g/L)
10 ppm
0.01 mS/cm
0.01 ppt
±2% F. S.
Manual, 1 point, through trimmer
HI 70031P
HI 70032P
HI 70039P
HI 70038P
Automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C
200 to 1600 μS/cm
200 to 1600 ppm
0.70 to 3.50 mS/cm
0.70 to 3.50 ppt
red LED blinks when measured value differs from setpoint more than:
+100 μS/cm
±100 ppm
±0.2 mS/cm
±0.2 ppt
HI 7634/2
HI 7634/2
HI 7632/2
HI 7632/2
all probes are provided with 2 m (6.6’) cable and ½" thread for in-line installation
12 Vdc adapter (included)
0 to 50°C (32 to 122°F); RH max 100%
86 x 110 x 43 mm (3.4 x 4.3 x 1.7’’)
215 g (7.6 oz.)
5th
Edition
Monitoring Systems
HI 991404 • HI 991405
Combo pH, EC/TDS and Temperature
Monitor with Large Backlit LCD
• Waterproof
• Adjustable TDS ratio
• Adjustable β
• Stability indicator
• Extra-large display
• 12 VDC power supply
The Combo HI 991404 and HI 991405 series are designed for continuous, high
accuracy pH, EC/TDS and temperature measurements. These microprocessor indicators continuously monitor the three most important nutrient parameters in hydroponics,
greenhouses and horticultural applications with a single instrument. These indicators
feature a large, dual-level, back-lit LCD to give you instantaneous readings of pH, EC
or TDS and temperature, even from a distance. At startup, these indicators perform a
self-check to assure proper working condition. HI 991404 and HI 991405 also have
a stability indicator and hold feature to prompt the user when to take the reading and
freezes the display for easy and accurate recording. These instruments are supplied with
an advanced, non-clogging double junction pH electrode and a rugged conductivity
probe that will withstand even the most aggressive environments.
SPECIFICATIONS
HI 991404
HI 991405
Range
pH: 0.00 to 14.00; EC: 0 to 3999 μS/cm; pH: 0.00 to 14.00; EC: 0.00 to 20.00 mS/cm;
TDS: 0 to 2000 ppm; Temperature: TDS: 0.00 to 10.00 ppt; Temperature: 0.0
0.0 to 60.0°C or 32.0 to 140.0°F
to 60.0°C or 32.0 to 140.0°F
Resolution
pH: 0.01; EC: 1 μS/cm; TDS: 1 ppm;
Accuracy
Dual-level
Backlit LCD!
pH: 0.01; EC: 0.01 mS/cm; TDS: 0.01
ppt; Temperature: 0.1°C or 0.1°F
pH: ±0.05; EC/TDS: ±2% F.S.; Temperature: ±0.5°C or ±1°F
pH Calibration
EC/TDS Calibration
EC/TDS Conv. Factor
1 or 2 points with 2 sets of memorized buffers
Automatic 1 point
Temp. Compensation
pH: automatic; EC/TDS: automatic, BETA (β) is adjustable from 0.0 to 2.4%/°C
Battery Type
Battery Life
Environment
Dimensions/Weight
Approx. 100 hrs of continuous use; auto shut-off after 8 minutes of non-use
0 to 50°C (32 to 122°F); 100% RH
163 x 40 x 26 mm (6.4 x 1.6 x 1”)/85 g (3.0 oz.)
HI 991404 is supplied complete with HI 1293D
pH electrode, fixed HI 7630 probe, pH and EC
calibration solutions, 12 Vdc power adapter
and instructions.
HI 991405 is supplied complete with HI 1293D pH electrode, fixed
HI 7630 probe, pH and EC calibration solutions, 12 Vdc power adapter
and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
70031P 1413 μ/cm calibration solution, (25) 20 mL sachets
7061M Probe cleaning solution, 250 mL
HI 981405N
pH/EC Monitor Featuring pH
and EC Simultaneous Display
The HI 981405N is ideal for agricultural, horticultural and hydroponics applications
where pH and EC levels need to be continuously monitored for optimal plant growth.
SPECIFICATIONS
Range
Resolution
pH: 0.1; 0.01 mS.cm
Accuracy
pH: ±0.2; EC: ±0.2% F.S.
Calibration
TDS Version Available
HI 981404N w/0.7 conv. fac.
HI 983302N
pH: 0.0 to 14.0; EC: 0.00 to 9.99 mS.cm
1 or 2 points for pH, Manual 1 point EC
Probe
Power Supply
Input Impedance
Environment
Weight
ACCESSORIES
HI 981405N is supplied complete with HI 1286 pH electrode, HI 7632
EC probe, HI 1283 grounding bar, pH and EC calibration solutions (20 mL
each), screwdriver, 12 Vdc adapter and instructions.
Automatic 5 to 50°C (EC only)
1012 Ohm
0 to 50°C (32 to 122°F); max. 95% RH
160 x 110 x 35 mm (6.3 x 4.3 x 1.4”)
300 g (10.6 oz)
HI 70039P 5000 μS/cm calibration solution,
(25) 20 mL sachets
HI 70300M Electrode storage solution, 250 mL
HI 7061M Electrode cleaning solution, 250 mL
29
Monitoring Systems
HI 981504/5 • HI 981504/7
pH/TDS/Temperature Monitor
• Simultaneous display
• 3 backlit LCDs
• 2 models available for
0.5 or 0.7 TDS factors
• Measure in °C or °F
• Extra-large displays
• 12 VDC power supply
The HI 981504 has been designed for continuous and simultaneous monitoring of pH,
TDS and temperature.
Simply install the HI 981504 above the sample to be tested, plug the instrument to
the mains and immerse the probes. pH, TDS and temperature measurements
will be simultaneously displayed on three backlit LCDs.
Users can easily select the temperature unit through a switch on the
back panel.
The HI 1286 gel-filled pH electrode is provided with a waterproof sheath to
protect the BNC connector. The unique design of the electrode provides
longer life in aggressive solutions. The HI 7634 TDS probe is easy to clean
and requires little maintenance. Measurements are accurate and the meter
can be calibrated at on or two points for pH and at a single point for TDS.
Temperature range is factory calibrated.
Two models are available:
•
•
SPECIFICATIONS
HI 981504
pH: 0.0 to 14.0; TDS: 0 to 1990 ppm;
Temperature: -10.0 to 60.0°C or -14.0 to 140.0°F
Range
Resolution
pH: 0.1; TDS: 10 ppm; Temperature: 0.1°C or 0.1°F
Accuracy
pH: ±0.2; TDS: ±2% F.S.; Temperature: ±0.3°C or ±0.5°F
pH Calibration
Manual 2 points through trimmers
TDS Calibration
TDS Factor
0.5 (HI 981504/5) or 0.7 (HI 981504/7)
pH: HI 1286 (included); TDS: HI 7634 (fixed);
Temperature: Stainless steel, 2 m cable (fixed)
Probes
Temp. Compensation
Automatic, 5 to 50°C (41 to 122°F), for TDS readings only
Power Supply
12 VDC power adapter (included)
Environment
Dimensions/Weight
0 to 50°C (32 to 122°F); 95% RH
160 x 110 x 35 mm (6.3 x 4.3 x 1.4”)/560 g (1.2 lb.)
HI 981504 is supplied with HI 1286 pH electrode, HI 7634 TDS probe, temperature probe, TDS sachet,
(2) cleaning solution sachets, screwdriver, 12 Vdc power adapter and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
30
1286 Double junction, plastic body pH electrode with 2 m (6.6’) cable and BNC connector.
70004P pH 4.01 buffer solution, (25) 20 mL sachets
7061M Probe cleaning solution, 250 mL
731326 Calibration screwdriver, 20 pcs
®
5th
Edition
Monitoring Systems
HI 9565
Thermo-Hygrometer with Dew Point Display
and Calibration Data-Logging RH Probe
• Store calibration data in probe for meter transfer
• Backlit LCD
• Displays temperature in °C and °F
HI 9565 portable thermo-hygrometer is designed to provide excellent performance in
harsh environments and poorly lit areas.
The HI 70602 RH probe’s internal microchip can store calibration data. When the probe
is connected to another hygrometer, the microchip transfers the stored calibration data
and there is no need to recalibrate the instrument.
The HI 9565 also features auto-off after 20 minutes of inactivity, temperature readings in
Celcius and Fahrenheit, and on-line help to indicate anomalies and direct procedures.
In addition to RH and temperature the HI 9565 will display the dew point with the press
of a button. The dew point indicates, at a certain temperature, the presence of water
vapor in the air. With this feature HI 9565 permits useful and rapid environmental monitoring where a controlled microclimate is necessary such as in greenhouses.
SPECIFICATIONS
HI 9565
RH: 20.0 to 95.0%; Temperature: 0.0 to 60.0°C (32 to 140°F);
Dew Point: -20.0 to 60.0°C (-4.0 to 140.0°F)
Range
Resolution
RH Probe
RH: 0.1%; Temperature: 0.1°C/0.1°F; Dew Point: 0.1°C/0.1°F
RH: 3% (50 to 85% RH), ±4% (outside); Temperature: ±0.5°C/±1°F;
Dew Point: ±0.5°C/±1°F
HI 70602 RH combined probe with built in temperature sensor and
microchip, 1 m cable (included)
Battery Type/Life
(1) 9V AA/approx. 250 hours of continuous use;
auto-off after 20 minutes of non-use
Environment
Dimensions
164 x 76 x 45 mm (6.5 x 3 x 1.8'')
Weight
340 g (12 oz.)
HI 9565 is supplied with HI 70602 RH probe, battery, instruction manual and blue protective case.
ACCESSORIES
HI 70602 RH probe with temperature sensor, 1 m (3.3’)
HI 148
Temperature Indicator with Built-in LED Alarm Signal
• Continuous ambient temperature
monitoring
• Visible LED alarm
• User-selectable alarm set point
The HI 148 is a rapid response
continuous monitor thermometer which alerts the user when
temperatures are becoming too
high for delicate crops. The HI
148 can be mounted anywhere
and is powered by 12 VDC.
SPECIFICATIONS
Range
Resolution
Accuracy
Setpoint
Alarm
Sensor
Power Supply
Dimensions
Weight
HI 148
HI 148-01: -4.0 to 140°F; HI 148-00: -20.0 to 60.0°C
HI 148-01: 0.1°F; HI 148-00: 0.1°C
HI 148-01: ±0.9°F; HI 148-00: ±0.5°C
HI 148-01: Selectable from 32.0 to 122.0°F;
HI 148-00: Selectable from 0.0 to 50.0°C
LED blinks when measured temperature is
higher than the set point
Incorporated, encapsulated stainless steel
12 VDC external power adapter (included)
86 x 94 x 33 mm (3.3 x 3.7 x 1.3”)
150 g (5.2 oz.)
HI 148-00 is supplied with 12 VDC adapter and instructions.
HI 148-01 is supplied with 12 VDC adapter and instructions.
31
Chemical Test Kits
Chemical Test Kits
HANNA instruments®’ Chemical Test Kits are economical, easy
to use and practical in design. Each test kit comes with thorough
instructions and everything necessary to perform quick and
easy tests.
HI 3895- Agricultural Multiparameter Test Kit
Parameter
Nitrogen
Phosphorous
Potassium
pH
Method
Colorimetric
Colorimetric
Turbidimetric
Turbidimetric
Range(s)
traces, low, med, high
from 4 to 9 pH (1 pH increments)
Chemical Method
Ned
Ascorbic acid
Tetraphenylborate
pH indicators
# Tests
10
10
10
10
Method
Colorimetric
Colorimetric
Turbidimetric
Turbidimetric
Range(s)
from 4 to 9 pH (1 pH increments)
Chemical Method
Ned
Ascorbic acid
Tetraphenylborate
pH indicators
# Tests
25
25
25
25
Weight
3.7 oz. (105 g)
HI 3896- Agricultural Multiparameter Test Kit
Parameter
Nitrogen
Phosphorous
Potassium
pH
Weight
23.3 oz. (660 g)
Agricultural Single Parameter Test Kits
Parameter & (Code)
Method
Range(s)
Chemical Method
# Tests
Weight
Acidity (HI 3820)
Titration
0-100 mg/L
0-500 mg/L
Methyl-orange
Phenolphthalein
110 total
32 oz. (910 g)
Alkalinity (HI 3811)
Titration
0-100 mg/L
0-300 mg/L
Phenolphthalein
Bromophenol blue
110 total
16 oz. (460 g)
Titration
Colorimetric
Titration
Titration
0-500 gpg
0-2.5 mg/L
0-5.0 mg/L
>0.0 meq/100g
Bromophenol blue
Nessler
Boric Acid
EDTA
100
25
100
100 (approx.)
13 oz. (363 g)
6.3 oz. (180 g)
27.5 oz. (780 g)
339 g
Carbon Dioxide (HI 3818)
Titration
0-10.0 mg/L
0-50.0 mg/L
0-100 mg/L
Phenolphthalein
110 total
16 oz. (460 g)
Chloride (HI 3815)
Titration
Mercuric Nitrate
110 total
16 oz. (460 g)
Silver Nitrate
Titration
100 total
23.4 oz. (664 g)
Calcium Sulfate
100 total
31 oz. (883 g)
EDTA
100 total
16 oz. (460 g)
EDTA
EDTA
EDTA
Phenanthroline
EDTA
Phenanthroline
Cadmium reduction
50
50
50
50
50
50
100
4.2 oz. (120 g)
4.2 oz. (120 g)
4.2 oz. (120 g)
Cadmium reduction
100 total
36 oz. (1026 g)
Sulfanilamide
100
5.6 oz. (160 g)
Modified Winkler
110 total
32 oz. (910 g)
Checker Disc
Checker Disc
Titration
0-150 mg/L
40-500 mg/L
400-3000 mg/L
Fe: 0-5 mg/L
40-500 mg/L
0-5 mg/L
0-50 mg/L
IW: 0-50 mg/L
Soil: 0-60 mg/L
0-1 mg/L
0-10 mg/L
0-5 mg/L
0-2.3 mg/L
4.0-10.0 pH
0-40 g/kg
DPD
pH indicators
Mercuric nitrate
100
300
110
34 oz. (966 g)
7.5 oz. (215 g)
16 oz. (460 g)
DiST 4+test kit
>0.0 meq/L
Titration
100
27.6 oz. (785 g)
Checker Disc
0-4.0 mg/L
0-20.0 mg/L
Zincon
100
22.8 oz. (647 g)
Alkalinity, Total (HI 38014)
Ammonia (HI 3824)
Boron (HI 38074)
Calcium and Magnesium (soil) (HI 38080)
Chloride (HI 38015)
0-100 mg/L
0-1000 mg/L
500-10.000 mg/L
5.000-100.000 mg/L
Titration
Gypsum Requirement
& Exchangeable Sodium (HI 38083)
Titration
GR: 0-213 metric ton /ha
ES: 0-56.4 meq/100g soil
Hardness (HI 3812)
Titration
0-30 mg/L
0-300 mg/L
Hardness (HI 3840)
Hardness (HI 3841)
Hardness (HI 3842)
Iron
& Total Hardness (HI 3889)
Iron (HI 3834)
Nitrate (HI 3874)
Nitrate, Irrigation Water
& Soil (HI 38050)
Nitrite (HI 3873)
Titration
Titration
Titration
Colorimetric
Titration
Colorimetric
Colorimetric
Checker Disc
Colorimetric
Oxygen, Dissolved (HI 3810)
Titration
Ozone (HI 38054)
pH (HI 38058)
Salinity (HI 3835)
Sodium Absorption Ratio (SAR)
(HI 38078)
Zinc, HR (HI 38076)
32
®
5th
Edition
9 oz. (260 g)
5 oz. (145 g)
5.4 oz. (156 g)
Monitoring Systems
HI 141 Series
Temperature Dataloggers with
Internal and External Sensors
•
•
•
•
IP 67 waterproof casing
1 or 2 channels
1 second to 24 hour logging interval
Programmable high and low alarms
The HI 141 series is a family of temperature data loggers with
either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models
feature one or two stainless steel sensors on a 1 meter (3.3') cable
for direct insertion. HI 141 can store up to 16,000 temperature
samples in a protected, non-volatile EEPROM memory.
The logging interval can be set from once per second, up to every
24 hours, and logging delay start can be set anywhere up to 199
hours. The MIN or MAX temperature between logging intervals
can also be stored. All of your collected data is tamper-proof and
stored into serial numbered lots.
The user interacts with the logger, setting data acquisition parameters or downloading logged data, through an RS232 serial port
on a Windows® PC. The HI 141000 Windows® compatible software supports communication between the logger and the PC
through the HI 141001 infrared transmitter. The housing is waterproof and can include a convenient hanging loop (simply add an
"H" to the end of the code). A long-life AA lithium battery provides
power. For a typical 1 minute logging interval, your battery will last
about 4 years.
Note: Models with longer cable for external sensor are available
upon request.
SPECIFICATIONS
Model*
HI 141A
HI 141B
HI 141C
HI 141D
HI SERIES
Display
•
•
Sensor(s)
1 internal
1 external
1 internal
1 external
1 internal
1 external
2 external
Range
-40.0 to 80.0°C / -40.0 to 176.0°F
-40.0 to 125.0°C / -40.0 to 257.0°F
-20.0 to 70.0°C / -40.0 to 158.0°F
-40.0 to 125.0°C / -40.0 to 257.0°F
-40.0 to 80.0°C / -40.0 to 176.0°F
-40.0 to 125.0°C / -40.0 to 257.0°F
-40.0 to 125.0°C / -40.0 to 257.0°F
HI 141G
•
1 internal
1 external
-20.0 to 70.0°C / -40.0 to 158.0°F
-40.0 to 125.0°C / -40.0 to 257.0°F
HI 141J
•
2 external
-40.0 to 125.0°C / -40.0 to 257.0°F
HI 141E
HI 141F
SPECIFICATIONS FOR ALL MODELS
All HI 141 models are supplied with HI 740221 magnetic start key, battery and instructions.
HI
HI
HI
HI
141000 Windows® compatible software
141001 Infrared interface for PC connection
740221 Key for HI 141 magnetic start
740033 3.6 V AA lithium battery
HI 98510 Checktemp
®
Dip
Precision Thermometer
with Stainless Steel
Weighted Probe
• Hygienic, stainless steel
weighted probe
• 10' probe cable
• CAL-CHECK feature
(HI 98509-01)
0.1°C (-40.0 to 100.0°C); 0.2°C (> 100.0°C); 0.1°F (-40.0 to 190.0°F); 0.3°F (> 190.0°F)
Accuracy
±0.5°C (-40.0 to 0.0 and 70.0 to 100.0°C); ±0.4°C (0.0 to 70.0°C);±1.0°C (> 100.0°C);
±1.0°F (-40.0 to 32.0 and 158.0 to 212.0°F); ±0.8°F (32.0 to 158.0°F); ±2.0°F (> 212.0°F)
Environment
Diameter
Height
Weight
ACCESSORIES
HI 141 SERIES
Resolution
RH 100%
86.5 mm (3.4’’)
35 mm (1.4’’)
150 g (5.5 oz.)
* For models with a molded eye for hanging, add an “H” to the end of the model number.
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Type
Life approx.
Environment
Dimensions
Weight
HI 98509-01
-20.0 to 100.0°C
0.1°C
±0.5°C (-20 to 50°C); ±0.9°C (outside)
Stainless steel, 3 m (10’) cable
1.5V AAA
3 years of use
0 to 50°C (32 to 122°F); RH max 95%
106 x 58 x 19 mm (4.1 x 5.2 x 0.7)
80 g (2.8 oz.)
HI 98509-01 (Checktemp® -Dip C), °C readings, is supplied with
weighted probe with 3 m (9.9’) cable, battery and instructions.
HI 98510-01 (Checktemp® -Dip F), °F readings, is supplied with weighted probe with 3 m (9.9’) cable, battery and instructions.
33
Thermometers
HI 98810 • HI 98840
1 or 4 Channel Printing
and Logging Thermometers
• High accuracy and fast response time
• Print out time, date and temperature readings
• Log-on-demand
HI 98810 and HI 98840 combine high accuracy and fast response with an extensive logging feature and an infrared computer transfer system. All stored measurements are complete with time, date sample and probe number. The logon-demand function is activated by simply pressing one button, while for
automatic logging, the user can select a time interval from 1 to 180 minutes.
All logged data can be transferred to a PC by placing the instrument on the HI 9200
infrared interface, connected to the computer serial port. The connection is handled with
the HI 92000 Windows® compatible software from HANNA instruments®. The large backlit LCD allows readings in dimly lit conditions. These instruments can be powered with
batteries or with a 12 VDC supply. HI 98810 accepts one temperature probe while HI
98840 can be connected to 4 separate probes at the same time.
HI 98810 is supplied with an HI 762BL temperature probe (for general purpose/ liquid
measurements). Both models use the HI 762 series of thermistor probes by HANNA instruments®.
HI 98810 is supplied complete with HI 762BL temperature probe with 1 m
cable, 5 paper rolls, batteries, rugged carrying case and instructions. HI 98840
is supplied with 5 paper rolls, batteries, rugged carrying case and instructions.
SPECIFICATIONS
ACCESSORIES
Resolution
HI
HI
HI
HI
HI
HI
HI
HI
HI
762BL General purpose/liquid temperature probe with 1 m cable
762L/10 General purpose/liquid temperature probe with 10 m cable
762-18C Test key at -18.0°C
762000C Test key at 0.0°C
762070C Test key at 70.0°C
710034 Paper roll (10 pcs.)
710035 Ink cartridge (1 pc.)
9200/9 Serial interface for PC connection
±0.4°C (-20 to 120°C); ±0.7°C (outside); ±0.8°F (-4 to 248°F);
1.3°F (outside) (for 1 year, excluding probe error)
Accuracy
Channels
Probe
1
HI 762BL (included)
Printer
low power impact, 14 characters per line, using 38 mm
plain paper (HI 710034)
Printing/Logging Interval
selectable at 1, 2, 5, 10, 15, 30, 60, 120 or 180 minutes
PC Connection
(4) 1.5V AA battery or 12 VDC input/approx. 350 hours (without printing
and backlight); auto-off selectable after 5, 10, 15, 30, 45 or 60 min. of non-use
Range
Resolution
Accuracy
Probe
Battery Type/Life
Environment
Dimensions
Weight
Memory functions
Reads both °C & °F
Min, max and hold keys
High accuracy
HI 9043 is a hand-held thermometer that uses
a K-type probe (HI 766 series) together with an
advanced microprocessor to deliver temperature
measurements in the higher ranges.
®
HI 9043
-50.0 to 1350°C; -58.0 to 2462°F
0.1°C (-50.0 to 199.9°C); 1°C (outside);
0.1°F (-58.0 to 399.9°F); 1°F (outside)
±0.2% F.S. (for 1 year, excluding probe error)
K-thermocouple type, HI 766 series (not included)
(1) 9V AA/approx. 500 hours of continuous use
-10 to 50°C (14 to 122°F); RH max 95%
180 x 83 x 40 mm (7.1 x 3.3 x 1.6’’)
226 g (8.0 oz.)
HI 9043 is supplied complete with battery, protective case
and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
The powerful microprocessor also furnishes this meter
with memory functions. Simply press a button and the
meter will recall the highest and lowest temperatures
measured in the cycle. A hold key will guarantee the user
plenty of time to record the readings.
0 to 50°C (32 to 122°F); RH max 95%
220 x 82 x 66 mm (8.7 x 3.2 x 2.6’’)
550 g (1.2 lb.)
SPECIFICATIONS
K-Type Thermocouple
Thermometer with
Min, Max and HOLD
34
4
HI 762 series (not included)
HI 9200 interface through RS232 serial port and using HI 92000
software (not included)
Environment
Dimensions
Weight
HI 9043
HI 98840
-50.0 to 150.0°C; -55.0 to 300.0°F
0.1°C (-30.0 to 130°C); 0.2°C (outside); 0.1°F (-18 to 225°F);
0.2°F (225 to 260°F); 0.3°F (outside)
Power Supply/Life
•
•
•
•
HI 98810
Range
5th
Edition
766C Penetration, K-thermocouple probe with 1 m cable
766E1 General purpose, K-thermocouple probe with 1 m cable
710020 Spare protective case
Thermometers
HI 9063
Waterproof and Heavy-duty
K-Type Thermocouple Thermometer
•
•
•
•
High accuracy and resolution
Reads both °C & °F
Min, max and Hold keys
Large dual-level display
Instrumentation used in the field or industry is subjected to environmental extremes.
Due to this problem, HANNA instruments® has developed the HI 9063 to satisfy all of
your heavy-duty application needs.
This upgraded version of HI 9063 benefits from HANNA instruments®’ extensive experience
in producing instruments that surpass your requirements. The measurement ceiling has
been raised, auto-ranging added and accuracy enhanced.
Because it is often necessary to know the highest and lowest temperatures measured
during a certain process, HANNA instruments® has incorporated a dual-level LCD that
shows the current, minimum and maximum achieved temperatures.
Temperature readings are linearized for increased accuracy and resolution is automatically
switched from 0.1° to 1° at 200°C (400°F) and above.
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Type / Life
Environment
Dimensions
Weight
HI 9063 / HI 9063C
-50.0 to 199.9°C; 200 to 1350°C; -58.0 to 399.9°F; 400 to 2462°F
0.1°C (-50.0 to 199.9°C); 1°C (outside);
0.1°F (-58.0 to 399.9°F); 1°F (outside)
K-thermocouple type, HI 766 series
(4) 1.5V AA / approx. 2000 hours of continuous use
-10 to 50°C (14 to 122°F); RH max 100%
196 x 80 x 60 mm (7.7 x 3.1 x 2.4’’)
500 g (1.1 lb.)
Thermistor Probe
and
IR
gy
Inf
S enso
r
red
a
r
Te c h n
SPECIFICATIONS
Range
Resolution
Accuracy
IR Response Time
Optic IR Coefficient
Battery Type/Life
Dimensions
Weight
olo
HI 99556-01
IR: 14 to 572°F; Thermistor Probe: -40.0 to 302°F
IR: 1°F; Thermistor Probe: 1°F
IR: ±2% of reading or ±3°F; Thermistor Probe: ±1°F
1 second
3:1 ratio (ratio of distance to DIA of target)
9V/approx. 300 hours of continuous use
143 x 80 x 38 mm (5.6 x 3.1 x 1.5”)
320 g (11.3 oz.)
HI 9063 is supplied complete with batteries, protective case
and instructions.
HI 9063C is supplied complete with HI 766HD probe
handle, HI 766PE1, HI 766PB, HI 766PD probes,
ACCESSORIES
HI
HI
HI
HI
766C Penetration, K-thermocouple probe with 1 m cable
766E1 General purpose, K-thermocouple probe with 1 m cable
HI 99556-01
Infrared/Penetration Thermometer
• Ideal for spot checking & complete
verification of temperatures
• Fast response time
• Rugged housing
• Models available in °C
The new dual purpose HI 99556-01 is ideal for checking
temperatures everywhere from the greenhouse to the field. Spot
check with the infrared probe and get a closer look with the
thermistor thermometer. Comes complete with probe and
wrist strap.
HI 99556-01 is supplied with HI HI 765PW stainless steel probe,
ACCESSORIES
HI
HI
HI
HI
HI
710004 Soft carrying case
721316 Hard carrying case
710007 Blue shockproof rubber boot
731318 Sensor wipe tissues
765PW Temperature probe for HI 99556-01
35
Thermometers
HI 935005 • HI 935005N
K-Type Thermocouple Thermometers
Waterproof, Featuring Min, Max & HOLD
•
•
•
•
1600 Hours of Battery Life
High Range with Auto-ranging
Auto-calibration and backlit LCD (HI 935005N only)
HI 935005 is a hand-held waterproof thermometer that uses a K-type sensor together
with an advanced microprocessor to deliver accurate temperature measurement with an
extraordinary 1600 hour battery life. The dual-level LCD displays current temperature
along with the minimum and maximum extremes achieved during the session. Battery
level indication with low battery warning and error prevention furnishes this meter with
advanced battery management functions. A HOLD button allows the user to record
readings. The °C/°F button instantly switches between the Celsius and Fahrenheit
ranges. For even greater accuracy or dimly lit areas, select the HI 935005N. For even
greater accuracy, a CAL button allows the operator to remove the combined meter and
probe interchange error in an ice bath at 0°C. In addition to the calibration feature, HI
935005N features a user-activated backlight for low or no light conditions.
The HANNA instruments® exclusive shockproof rubber boots, HI 710007 and HI 710008,
offer maximum impact protection. A wide variety of interchangeable probes are available
to meet specific applications.
HI 935005 is supplied complete with batteries, protective case and
instructions.
HI 935005N is supplied complete with batteries, protective case and
instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
766C Penetration K-type temperature probe with 1 m cable
766D Air K-type temperature probe with 1 m cable
766E1 General purpose K-type temperature probe with 1 m cable
SPECIFICATIONS
Range
HI 935005/HI 935005N
-50.0 to 199.9°C and 200 to 1350°C; -58.0 to 399.9°F and 400 to 2462°F
0.1°C (-50.0 to 199.9°C) and 1°C (outside); 0.1°F (-58.0 to 399.9°F)
and 1°F (outside)
K-thermocouple type, HI 766 series (not included). See opposite page bottom
Resolution
Accuracy
Probe
Battery Type / Life
(3) 1.5V AA / approx. 1600 hours of continuous use
(with backlight off); HI 935005 only: auto-off selectable after 8 or 60 minutes
of non-use (can be disabled)
Environment
Dimensions
Weight
-10 to 50°C (14 to 122°F); RH max 100%
150 x 80 x 36 mm (5.9 x 3.1 x 1.4’’)
235 g (8.3 oz.)
HI 935007
Direct K-Type Probe Thermometer
with Waterproof Casing
The HI 935007 enhances the range of portable HANNA thermometers by measuring
temperature as high as 1350°C and 2462°F. The HI 935007 is offered at such an attractive
price bracket to make it possible for every operator to carry his or her own professional
instrument. The fixed HI 766C penetration probe with 1 meter (3.3’) of cable is also supplied. Three common AA batteries provide up to 1600 hours of continuous operation.
All these features with a wide measurement range and low cost make this meter
extremely popular in catering, food preparation, and restaurants.
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery
Type / Life
Environment
Dimensions
Weight
36
HI 935007
-50.0 to 199.9°C; 200 to 1350°C or 58.0 to 399.9°F; 400 to 2462°F
0.1°C; 1°C; 0.2°F; 1°F
HI 766C (fixed)
(3) 1.5V AA / approx. 1600 hours of use;
auto-off selectable after 8 or 60 minutes of inactivity (can be disabled)
-10 to 50°C (14 to 122°F); RH max 100%
150 x 80 x 36 mm (5.9 x 3.1 x 1.4’’)
235 g (8.3 oz.)
®
5th
Edition
HI 935007 is supplied complete with fixed probe HI 766C with 1 m
cable, batteries and instructions
ACCESSORIES
HI
HI
HI
HI
710004 Soft carrying case
Thermometers
HI 98801 • HI 98804
K, J, T-Type Thermocouple Logging
Thermometers with GLP
•
•
•
•
•
Dual-level backlit LCD
Selectable printing and logging intervals
Computer compatibility
Factory calibration certificate available
HI 98801 and HI 98804 thermometers combine the high accuracy and fast
response time of the printing series with an extensive logging feature and
infrared computer transfer system.
These meters support K, J or T-thermocouple probes, one for HI 98801 and
up to 4 for HI 98804.
All stored data are always complete with date, time, sample and probe number.
Measurements can be stored automatically at defined intervals (user
selectable from 1 to 180 minutes), or the current reading can be printed or
logged-on-demand by just pressing a button.
The backlit LCD allows operations even in poorly lit areas. Computer connection is through the HI 9200 infrared interface and serial port. Just place
the meter on the interface and the HI 92000 application software will transfer
all logged data. Both models can be powered with batteries or 12 Vdc input.
HANNA instruments® produces a wide range of K-type thermocouple probes
that can be used with this thermometer for many applications (HI 766 series).
SPECIFICATIONS
HI 98801 is supplied with 5 paper rolls, batteries, rugged carrying case and instructions.
HI 98804 is supplied with 5 paper rolls, batteries, rugged carrying case and instructions.
ACCESSORIES
HI
HI
HI
HI
HI
HI
HI
HI
HI
766C Penetration, K-type temperature probe with 1 m cable
766E1 General purpose, K-type temperature probe with 1 m cable
710034 Paper roll (10 pcs.)
710035 Ink cartridge (1 pc.)
9200/9 Serial interface for PC connection
HI 98801 • HI 98804
K: -200.0 to 999.9°C; 1000 to 1370°C; -300.0 to 999.9°F; 1000 to 2500°F;
J: -200.0 to 760.0°C; -300.0 to 999.9°F; 1000 to 1400°F; T: -200.0 to 400.0°C; -300.0 to 750.0°F;
Range
Resolution
K: 0.1°C (-99.9 to 999.9°C); 1°C (1000 to 1370°C); 0.2°C (-200.0 to -100.0°C); 0.2°F (-199.9 to 999.9°F); 1°F (1000 to 2500°F); 0.3°F (-300.0 to -200.0°F);
J: 0.1°C (-149.9 to 760.0°C); 0.2°C (-200.0 to -150.0°C); 0.1°F (32.0 to 999.9°F); 1°F (1000 to 1400°F); 0.2°F (-300.0 to 32.0°F);
T: 0.1°C (-99.9 to 400.0°C); 0.2°C (-200.0 to -100.0°C); 0.1°F (300.0 to 750.0°F); 0.2°F (-149.9 to 300.0°F); 0.3°F (-300.0 to -150.0°F)
Accuracy
Channels
Probe
Cold Junction
Printer
Printing/Logging Interval
PC Connection
±0.5°C (-200.0 to 999.9°C); ±1°C (outside); ±1°F (for 1 year, excluding probe error)
1 (HI 98801), 4 (HI 98804)
K, J, T-type thermocouple (not included)
NTC 10 K; 0.1°C resolution; ±0.3°C accuracy
Low power impact, 14 characters per line, using 38 mm plain paper (HI 710034)
Selectable at 1, 2, 5, 10, 15, 30, 60, 120 or 180 minutes
HI 9200 interface through RS232 serial port and using HI 92000 software (not included)
Power Supply
(4) 1.5V AA battery / approx. 350 hours (without printing and backlight); auto-off selectable after 5, 10, 15, 30, 45 or 60 minutes of non-use; 12 Vdc input
Environment
Dimensions
Weight
0 to 50°C (32 to 122°F); RH max 95%
220 x 82 x 66 mm (8.7 x 3.2 x 2.6’’)
550 g (1.2 lb.)
HI 766TR1
HI 766TR2
Penetration Probe
Penetration Probe
•
•
•
•
•
•
•
•
•
•
Use: semi-solids, liquids
MAX temperature: 250°C/482°F
Response time (90% of final value): 10 sec.
Probe length: 500 mm (19.7”); DIA 10 mm (0.4”)
Tube in stainless steel
Use: semi-solids, liquids
MAX temperature: 250°C/482°F
Response time (90% of final value): 10 sec.
Probe length: 1000 mm (39.3”); DIA 10 mm (0.4”)
Tube in stainless steel
37
NEMA Boxes
Make Your Own Control &
Injection Systems
HI 1211 • HI 1222
Controller & Monitors in an
Industrial Enclosure
Choose from TDS, Conductivity, pH, Resistivity or ORP. These
controllers will allow any system to be cost effectively monitored
24 hours a day.
•
•
•
•
•
•
•
•
NEMA protection
LCD display
Alarm contact
Key pad touch setting
Calibration and adjustable set points
Multi-ranges for TDS and conductivity
Available in 115 V or 12 VDC
Simple to Install - just plug in probe,
power & relay meter and you’re in
business!
HI 1222 with dual meter capability
Combine any of HANNA’s Mini Controllers into the HI 1222
for versatile monitoring and control.
HI 1211 with single meter capability
38
®
5th
Edition
Choose from the single capability
HI 1211 or the dual capability HI 1222
Panels Custom Configured to
Your Specific Agricultural Needs!
• Knowledgeable support
• Pre-wired and ready to be installed
• Built by the manufacturer to YOUR specs!
At HANNA, we want
to make your life
easier!
Buying process instrumentation is easy, but setting it
up to do its task and interact with other devices is
another thing. It can
require engineers, electricians, instrumentation
specialists and plumbers.
Most large size companies
have the resources in-house to build control panels and install
them, but this may not be your case.
Big or small, we’re here to help!
As a manufacturer, we understand that it may be difficult and
expensive for a small or mid-size company to seek or subcontract people qualified in this field. This is the reason we added the
control panel design department. At HANNA, we know what
our products can do for you and we are committed to help you
integrate our products to your applications.
Whether your needs are for a 6 x 6’ complete control system with 10 state of the art
controllers or a low cost mini-controller in a 6 x 6” box, we will build it. HANNA
ensures that no one is left on their own when it comes to customized control panels!
We’ll work with you!
Simply call us and tell us about
your present or future applications. Our design department
together with your HANNA
authorized dealer will work with
you to fill your needs, solve your
problems and engineer turnkey
solutions to the most complex
problems. All systems are custom designed to your specifications, pre-wired and ready to be installed. Just plug them in!
The best value on
the market!
Who knows product better than the manufacturer?
This is why we go the extra
mile for our customers.
Our buying power lowers
overall costs of our custom control panels to the
benefit of our customers.
Your
local
HANNA
authorized dealer works with us to offer outstanding prices,
knowledgeable customer service and fast delivery times. Service
contracts are also available for maintenance and calibration.
39
Customized Panels
HANNA Customized Panels
mini Controllers
BL Series Mini Controllers
The Perfect Solution for Water
Analysis and Control
•
•
•
•
•
•
•
Any system can
be cost effectively
monitored 24
hours a day.
Fire retardant casing
Larger LCD
Selectable overdose protection system
External disable feature
Selectable control override
Matching pin connection
4-20 mA analog output
Traditionally, process monitoring and control has required considerable investment in
system design, equipment, maintenance and training. With the introduction of the BL
Series Mini-Controllers, HANNA provides a solution for industries that require reliable,
efficient and affordable process monitoring and control.
The new BL Series Mini-Controllers are easy to use, durable and provide precise monitoring and control of pH, ORP, TDS, EC, and Resistivity.
Each Mini-Controller is 8 x 5 cm (3 x 2") in size and weighs less than 9 oz. The compact
size and simplicity of design allows for easy installation and integration into almost any
existing system.
Fit these controllers
into our popular custom
built NEMA boxes!
page 38
BL 981411-0 • BL 981411-1
BL 931700-0 • BL 931700-1
BL 982411-0 • BL 982411-1
BL 932700-0 • BL 932700-1
0.0 to 14.0 pH
0.00 to 14.00 pH
0 to 1000 mV
±1000 mV
0.1 pH
0.01 pH
1 mV
1 mV
±0.2 pH
±0.02 pH
±5 mV
±5 mV
±0.1 pH
±0.10 pH/±0.10 mA
±5 mV
Range
Resolution
Typical EMC Deviation
Calibration
The control action of each Mini-Controller can be disabled, set to automatic or manually operated directly from the front panel.
A selectable "Overtime" overdosing system can deactivate a valve, pump, or other connected device if activation continues for more than the set time, which is adjustable from
5 up to 30 minutes.
pH & ORP
SPECIFICATIONS
Each model is a single set point controller designed to control the operation of a pump,
valve or mechanical device for dosing, filling and emptying tanks and rerouting flow.
±5 mV / ±0.10 mA
Manual, through CAL (offset) trimmer Manual, through offset & slope trimmers
Manual, through CAL trimmer
Dosing Contact
Maximum 2A (fuse protected), 250 VAC, 30 VDC
Dosing Selection
Acid or Alk, selectable on the back panel
Rdx or Oxd, selectable on the back panel
=Acid dosage=Relay ON if Measure > Setpoint
=Reductant dosage=Relay ON if Measure > Setpoint
Contact Open
Contact Close
Setpoint
=Alk dosage=Relay ON if Measure < Setpoint
=Oxidant dosage=Relay ON if Measure < Setpoint
Adjustable, from 0 to 14 pH
-
Adjustable, from 0 to 1000 mV
Adjustable, from -1000 to 1000 mV
-
4 to 20 mA, accuracy ±0.20 mA,
500 W maximum load
-
4 to 20 mA, accuracy ±0.20
mA,500 W maximum load
Recorder Output
CONDUCTIVITY
SPECIFICATIONS
Range
Resolution
Probe
Calibration
BL 983313-0 • BL 983313-1
Maximum 2A (fuse protected), 250 VAC, 30 VDC;
Contact close when measure > Setpoint
Dosing Contact
Setpoint
40
BL 983327-0 • BL 983327-1
BL 983320-0 • BL 983320-1
BL 983322-0 • BL 983322-1
0 to 1999 μS/cm
0.00 to 10.00 mS/cm
0.0 to 199.9 μS/cm
0.00 to 19.99 μS/cm
1 μS/cm
0.01 mS/cm
0.1 μS/cm
0.01 μS/cm
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
HI 7634-00 EC/TDS probe (optional) HI 7632-00 EC/TDS probe (optional) HI 7634-00 EC/TDS probe (optional) HI 7634-00 EC/TDS probe (optional)
Automatic from 5 to 50°C (41 to 122°F); β=2%/°C
Adjustable, from 0 to 1999 μS/cm
Adjustable, from 0 to 10 mS/cm
®
5th
Edition
Maximum 2A (fuse protected), 250 VAC, 30 VDC;
Adjustable, from 0 to 199.9 μS/cm
Adjustable, from 0 to 19.99 μS/cm
• 2 amp built-in fuse
• Removable modules
for easy maintenance
• Quick-connect
terminal blocks
CONDUCTIVITY & TDS
SPECIFICATIONS
All Models
Overtime
Power Consumption
Installation Category
Power supply:
BL XXXXXX-0
BL XXXXXX-1
Dimensions
Adjustable, typically from 5 to approx. 30 min.
10 VA
II
External (fuse protected)
12 VDC
115/230 VAC (fuse protected); 50/60 Hz
79 x 49 x 95 mm (3.1 x 1.9 x 3.7”)
SPECIFICATIONS
BL 983317-0 and BL 983317-1 BL 983319-0 • BL 983319-1
Range
Resolution
Probe
Calibration
0.00 to 10.00 mS/cm
0 to 1999 ppm
0.00 to 10.00 ppt
0 to 999 ppm
0.01 mS/cm
1 ppm
0.01 ppt
1 ppm
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
0.65
0.5
0.5
HI 7632-00 EC/TDS probe (optional) HI 7634-00 EC/TDS probe (optional) HI 7632-00 EC/TDS probe (optional) HI 7634-00 EC/TDS probe (optional)
Dosing Contact
Setpoint
BL 983318-0 • BL 983318-1
Contact close when measure < Setpoint
Adjustable, from 0 to 10 mS/cm
BL 983329-0 • BL 983329-1
Adjustable, from 0 to 1999 ppm
Adjustable, from 0 to 10 ppt
Adjustable, from 0 to 999 ppm
BL 983315-0 • BL 983315-1
BL 983321-0 • BL 983321-1
BL 983324-0 • BL 983324-1
BL 983314-0 • BL 983314-1
0.0 to 199.9 ppm
0.1 ppm
±2% f.s.
±2% f.s.
0.5
0.00 to 19.99 ppm
0.01 ppm
±2% f.s.
±2% f.s.
0.5
HI 7634-00 EC/TDS probe (optional)
0.0 to 49.9 ppm
0.1 ppm
±2% f.s.
±2% f.s.
0.5
0.00 to 19.90 MW/cm
0.10 MW/cm
±2% f.s.
±2% f.s.
HI 3314 resistivity probe (included)
TDS & RESISTIVITY
SPECIFICATIONS
Range
Resolution
Probe
Automatic and linear from 5 to 50°C
(41 to 122°F)
-
β=2.5, 3.5 and 4.5%/°C,
user-selectable
Temperature Coefficient
Calibration
Dosing Contact
Setpoint
Factory Calibrated
Maximum 2A (fuse protected), 250 VAC, 30 VDC; Contact close when measure > Setpoint
Maximum 2A (fuse protected), 250
VAC, 30 VDC; Contact closed when
measure < setpoint
Adjustable, from 0 to 199.9 ppm
Adjustable, from 0 to 19.90 MW/cm
41
mini Controllers
32 Models To Measure pH, ORP, Conductivity, TDS and Resistivity.
Panel Mount Controllers
HI 504
pH/ORP Controller with TeleControl™ and Sensor Check™
Digital Transmitter Input
Many industrial applications require distances
from the regulation system to the probe
greater than the 15 meters provided by
industrial probes. For these situations, the
use of a transmitter is necessary.
All HI 504 models are supplied with a digital
transmitter input. Compared to a traditional
analog transmitter, which has a maximum
transmission length of 300 meters, our new
digital transmitter, HI 504910 permits the
connection with the controller at distances
up to 1.2 km. The data transmitted can be
pH, mV and temperature.
This digital transmitter is compatible with
the Sensor Check™ function and
therefore guarantees excellent precision
with continuous probe inspection.
GSM Cellular Module
The optimization of an industrial process
plant means the reduction of costly
unscheduled shutdown time. With this in
mind, HANNA instruments® has developed
the HI 504900 GSM cellular module*
(optional). The HI 504900 is used for sending SMS alarm messages* and also
requests live updates on actual process
conditions from authorized personnel.
The GMS cellular module can memorize
one or two mobile phone numbers, where
alarm messages can be sent whenever a
malfunction is revealed. The SMS message
immediately reports the nature of the alarm.
Some causes include: Damaged pH probe,
Damaged temperature probe or High
setpoint exceeded.
•
•
•
•
•
•
•
•
•
•
Sensor check™ pH/ORP electrode diagnostic system
RS 485 interface
Digital transmitter input
Programmable auto-cleaning cycle
Fail safe alarm system
Programmable hold system
Logging of the last 100 events
Analog Output: data logging or PID dosage control
UL certification
HI 504 introduces an innovation in the concept of pH and ORP control, that enhances the entire line of
process controllers engineered by HANNA instruments®. Over 25 years of experience in the production of
industrial controllers have enabled us to develop this series of high performance instruments with our new telecontrol technology. This technology supplies the means to control, from whatever distance and in real time,
one or more installations, allowing the user to optimize operations such as maintenance cycles. With two-way
communication supplied by the RS485 output and Windows® compatible software, users can control the
complete regulation process from the PC or through SMS via cellular phone.
Measurement reliability is guaranteed by many self-diagnostic and troubleshooting functions, such as our
innovative Sensor Check™ feature which is the result of advanced research and application know-how.
The universal BNC connector allows the use of any type of industrial probe chosen for a specific application,
but at the same time renders probe replacement a simple and time saving operation.
The HI 504 family offers a wide range of models, designed to fit your individual needs, and is able to satisfy
whatever application of monitoring and regulation you require.
* Compatible phones, plans & SIM cards must be purchased separately from an outside provider and is not in any way covered by HANNA instruments®
42
®
5th
Edition
Receive electrode status & diagnostic messages
on the LCD display or via your mobile phone! *
Sensor CheckTM pH/ORP
As part of the powerful self-diagnostic functions of this instrument series, the Sensor Check™ system provides
continuous inspection of probe status. The test is not limited to a simple signal that indicates an error in
progress, but it reports the nature of the breakdown with a specific error code. With the use of the HI 504900
GSM module, errors or alarms can be sent directly to the operator's mobile phone as an SMS message.
Broken electrode
Dirty electrode
Electrode not immersed
Here are the types of breakdowns shown by sensor
check:
> pH electrode broken
> Reference electrode dirty
> Reference electrode or matching pin not immersed
> Electrode junction dirty or clogged
> Short-circuit between cables of pH and reference
electrodes
> Signal problems from the cable or connector due
to humid or dirty environments
The internal circuit of the instrument executes two independent tests, one for the probe and one for the reference
chamber, measuring the respective impedance values every 30 seconds. These tests last for a very short period
to avoid electrolysis and polarization, which can be caused by a prolonged exposure to an electric current.
SPECIFICATIONS
Range
Resolution
Input Impedance
Digital Output
Analog Output
Dosing and Alarm Relay
Temperature Probe
Power Supply
Environment
Casing
Dimensions / Weight
HI 504
-2.00 to 16.00 pH; -2000 to 2000 mV; -30 to 130.0°C
0.01 pH; 1 mV; 0.1°C (above -10 °C); 1°C (below -10°C)
±0.02 pH; ±2 mV; ±0.5°C (-9.9 to 130.0°C); ±1°C (-30 to -10°C)
1012 Ohm
Isolated output; contact closed upon Hold mode
1 or 2 independent outputs (configuring as 0-20 mA or 4-20 mA)
Electromechanical relay SPDT contact output ; 5A - 250 Vac, 5A - 30 Vdc (resistive load);
fuse protected: 5A, 250V “Quick Blow” fuse
Automatic or manual, -30 to 130°C
Pt100/Pt1000 sensor (with automatic recognition and damage test)
24 VDC/AC; 115 Vac ±10%, 230 Vac ±10%, 100 Vac ±10%; 50/60 Hz
IP54 (front panel)
Panel cutout:140 x 140 mm, instrument: 144 x 144 x 170 mm / 1.6 kg (3.5 lb.)
1, single setpoint
X=1
2, dual setpoint
X=2
8, single setpoint & advanced cleaning
X=8
9, dual setpoint & advanced cleaning
X=9
Each HI 504 model is supplied complete with mounting
brackets and instruction manual. Match the last letters in
the product code to the corresponding numbers according
to desired configuration.
Direct Wire Connection or TeleControl through an RS485 Port
The RS485 output is a versatile interface
that can be used for connecting the HI 504
controller to many other devices. The
simplest configuration is a direct wire
connection to a PC (with distances up to
1.2 km), or it is possible to use either a
traditional or GSM modem.
The remote control can be managed with
the HI 92500 Windows® compatible software. Once connected, the user can interact with the system, view parameters in
real time, download process data relative
to the last 100 events that have occurred
and, if necessary, modify or reconfigure
program settings (setpoints, alarms,
cleaning cycles, stand-by times, etc.).
When a connection is kept active, it is
possible to continuously download and
automatically store the process data in
Excel® format. This data, once saved, can
be easily organized into tables and
graphs, used for creating records and
supervising process progression.
RS485 Network
The RS485 output allows users to create a
network composed up to 32 instruments
using a simple double-wire cable. The
communication speed (up to 19200 bps)
allows the user to establish an RS485 network covering an area of up to 1.2 km
between the two instruments at both
extremities of the network.
The network can be created with HI 504
units or any other HANNA instruments®.
industrial controllers with RS485 output
(pH 502, mV 602, etc.). The entire network
can be managed by our HI 92500 software, using a simple wire connection to
a PC, with the HI 504902 traditional
modem or a GSM module (HI 504900 or
HI 504901).
1, ON/OFF control
Y=1
2, ON/OFF & PID control
Y=2
2, single analog output
Z=2
4, dual analog output
Z=4
0, 24 VDC/AC power supply
a=0
1, 115VAC power supply
a=1
a=2
a=3
HI 504XYZ-a
ACCESSORIES:
HI
HI
HI
HI
HI
HI
504900 GSM module*
504901 GSM supervisor
504902 RS485 modem (PSTN)
504910 Digital transmitter
7610 Stainless steel temperature probe
with Pt100 sensor and 5 m cable
HI 7611 Stainless steel temperature probe
with Pt1000 sensor and 5 m cable
HI
HI
HI
HI
HI
HI
HI
HI
7004/1L pH 4.01 buffer solution, 1 L
7020L 200-275 mV test solution, 500 mL
7091L Reducing solution, 500 mL
7092L Oxidizing solution, 500 mL
* Compatible phones, plans & SIM cards must be purchased separately from an outside provider and is not in any way covered by HANNA instruments®
43
HI 700 • HI 710
Microprocessor Conductivity
and TDS Controllers with 4-ring
Potentiometric Probe
The HI 700 series of regulators offer state-of-the-art specifications for your
process control. They can be configured for ON/OFF, Proportional, PI or PID
control. Thanks to our exclusive technology, they can be customized to best
fit your application. A menu-driven display aids the user throughout the operations with running messages and clear prompts. All relevant parameters can
be simply adjusted and will remain memorized until overwritten. Bright LED
lights show the current status even from a distance. With self-diagnostic features and extractable terminals, installation and maintenance are rapid and
simple. Password protection guarantees that the calibration and predetermined parameters cannot be altered unnecessarily. The controllers can operate with 4-ring probe or 4-20 mA signal. They accept probes with or without
a built-in Pt100 temperature sensor. HI 710 monitors and controls both conductivity and TDS.
•
•
•
•
•
•
•
Accurate, reliable and simple to install
Extensive range for both conductivity and TDS
Programmable through menu-driven display
Selectable isolated output in mAs and volts
On/Off, proportional, PI and PID controls
Automatic or manual temperature compensation
Parameters adjustable for custom applications
SPECIFICATIONS
•
•
•
•
•
•
Two Set points and one alarm relay
Calibration with backup memory
Password protection against tampering
Fail-safe protection against power failure
Status LED on front panel
Self-diagnostics and troubleshooting guides
HI 700
HI 710
EC: 0.0 to 199.9 μS/cm; 0 to 1999 μS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9
EC: 0.0 to 199.9 μS/cm; 0 to 1999 μS/cm; 0.00 to 19.99 mS/cm;
mS/cm; TDS: 0.0 to 100.0 ppm; 0 to 1000 ppm; 0.00 to 10.00 ppt; 0.0 to
0.0 to 199.9 mS/cm; Temperature: -10.0 to 100.0°C
100.0 ppt; Temperature: -10.0 to 100.0°C
Range
Resolution
EC: 0.1 μS; 1 μS; 0.01 mS; 0.1 mS; TDS: 0.1 ppm; 1 ppm;
0.01 ppt; 0.1 ppt Temperature: 0.1 °C;
EC: 0.1 μS; 1 μS; 0.01 mS; 0.1 mS; Temperature: 0.1 °C
±0.5% F.S. (EC / TDS); ±0.5°C (0 to 70°C); ±1°C (outside)
EC Calibration
Automatic or manual at 1 point
Automatic (with Pt100 probe) or manual from -10 to 100°C with ß = 0.00 to 10.00%/°C
—
Outputs
Analog: isolated 0-1 mA, 0-20 mA and 4-20 mA; 0-5 Vdc, 1-5 Vdc and 0-10 Vdc or digital: RS485 bi-directional opto-isolated
Analog Input
4-20 mA
Setpoint Relay
2 contact outputs SPDT 5A-250 Vac, 5A-30 Vdc (resistive load)
Alarm Relay
Contact output SPDT 5A-250 Vac, 5A-30 Vdc (resistive load)
Power Supply
115 Vac ±10% or 230 Vac ±10%; 50/60 Hz
Environment
Dimensions
Panel cutout:140 x 140 mm, instrument: 144 x 144 x 170 mm
Weight
1.6 kg (3.5 lb.)
ACCESSORIES
0, EC Controller
1, EC/TDS Controller
HI 700 and HI 710 is supplied
complete with mounting brackets and
instruction manual. Match the last letters in the product code to the corresponding numbers according to
desired configuration.
1, analog output
2, RS485 output
HI 7 022 -
44
HI
HI
HI
HI
HI
1, 115 VAC power supply
®
5th
Edition
504901 GSM supervisor
7034L 80000 μ/cm calibration solution, 500 mL
Wall Mount Controllers
HI 21
Advanced pH Controller
with Matching Pin
The HI 21 controllers are simple-to-operate, microprocessor-based
process meters packed with features. For more flexibility and better
resolution for chart recorders, any two points between 0 and 14
pH can be chosen to correspond to the analog output spans.
Push button password programming prevents tampering. The
microprocessor memory is fully programmable and has a 3
month backup power supply. The Fail Safe Alarm system protects the HI 21 against the pitfalls of process control, like power
interruption or line failure.
With HI 21 quick 1, 2 or 3 point calibration at pH 4.01, 7.01 and
10.01 comes standard. The temperature can be manually or
automatically compensated for. You can also choose from
ON/OFF, Proportional and PID control to save on chemicals.
ORDERING
INFORMATION:
Each HI 21 model
is supplied with
instruction manual.
1, single setpoint
X=1
2, dual setpoint
X=2
5, single setpoint & advanced cleaning
X=5
1, ON/OFF control
Y=1
2, ON/OFF & PID control
Y=2
SPECIFICATIONS
Range
Resolution
Input Impedance
pH Calibration
Outputs
Setpoint Relay
Alarm Relay
1, single analog output
Z=1
Z=2
Z=3
HI 21XYZ-a
a=1
a=2
Power Supply
Power Consumption
Environment
Protection
Dimensions
Weight
HI 21
0.00 to 14.00 pH; -9.9 to 120°C
0.01 pH; 0.1°C
±0.02 pH; ±0.5°C
1012 Ohm
Automatic, 1, 2 or 3 point, at pH 4.01, 7.01, 10.01
Automatic (with Pt100 probe) or manual from -9.9 to 120°C
Digital: RS485 bi-directional opto-isolated; or analog, galvanically
isolated: 0-1 mA, 0-20 mA and 4-20 mA, 0-5 Vdc, 1-5 Vdc and 0-10 Vdc
1 or 2 contact outputs SPDT 5A-250 Vac, 5A-30 Vdc (resistive load);
fuse: 5A, 250V
Contact output SPDT 5A-250 Vac, 5A-30 Vdc (resistive load);
fuse: 5A, 250V
115 Vac ±10% or 230 Vac ±10%; 50/60 Hz; fuse: 400 mA, 250 V
15 VA
0 to 50°C (32 to 122°F); RH max. 85% non-condensing
IP 54
221 x 181 x 86 mm (8.7 x 7.1 x 3.4’’)
1.4 kg (3.1 lb.)
BL 7916
pH Controller and Pump
•
•
•
•
pH controller and dosing pump in one compact unit.
±0.01 pH accuracy with unbeatable performance.
Isolated 4 to 20 mA recorder output.
Proportional dosing slows the pump down when the measured pH level
approaches the set value which ensures precise dosage and avoids costly
waste of chemicals due to overdosage.
• Alarm contact is activated whenever the pH value varies by more than 2 pH units
from the set point.
• Auxiliary contacts allow the user to attach a mixer or priming pump that is activated
only when the pump is dosing.
• PVDF, FPM/FKM and PTFE materials are used for parts that come into contact with liquid.
220/240V ±15%;
50/60Hz version available
(BL 7916D)
BL 7916U is supplied with discharge and suction valves, polyethylene
tubing, 110/115V power cable and instructions.
ACCESSORIES:
HI
HI
HI
HI
HI
HI
HI
HI
HI
721101 Pumphead, O-ring and screws
721102 Discharge valve assembly
721103 Suction valve assembly
721004 Injection valve assembly (required)
721005 Foot valve assembly (required)
721008 Ceramic weight (4)
SPECIFICATIONS
Range
Resolution
Flow Rate
Input Impedance
Dosage
Calibration Offset:
Recorder Output
Dosing Contact
Alarm Contact
Power Supply
Environment
Dimensions
Weight
BL 7916
0.00 to 14.00 pH
0.01 pH
±0.01 pH
See table on page 43
1012 Ohm
proportional, acid or base, user selectable
±1 pH with trimmer; slope: 85 to 115% with trimmer
4-20 mA (isolated)
1 isolated contact, 2A, Max. 240V, resistive load, 1,000,000 strokes
110/115V ±15%; 50/60Hz (40W)
181 x 221 x 142 mm (7.1 x 8.7 x 5.6’’)
5 kg (11 lb.)
45
HI 22
Advanced ORP Controller
with Matching Pin
The HI 22 controllers have been engineered with the same
outstanding features as the HI 21 meters. The microprocessor
memory is fully programmable and has a 3-month backup
power supply. The Fail Safe Alarm system protects these meters
against the pitfalls of process control.
User-selectable timing capability safeguards against overdosing
and saves money while protecting the environment.
These instruments have a differential input, extending electrode
life by eliminating ground loop current through the reference.
Users can choose between ON/OFF and Proportional control as
well as selectable current and voltage outputs.
For more flexibility and better resolution for chart recorders,
choose any two points between 0 and 2000 mV to correspond
to the analog output spans.
SPECIFICATIONS
Range
Resolution
Input Impedance
pH Calibration
Digital: RS485 bi-directional opto-isolated; or analog, galvanically isolated:
0-1 mA, 0-20 mA and 4-20 mA, 0-5 Vdc, 1-5 Vdc and 0-10 Vdc
Outputs
Setpoint Relay
Each HI 22 model is supplied with instruction manual.
Alarm Relay
111, single setpoint
122, dual setpoint
HI 22
-
HI 22
ORP: -2000 to 2000 mV; Temperature: -9.9 to 120°C
ORP: 1 mV; Temperature: 0.1°C
ORP: ±2 mV; ±0.5°C
1012 Ohm
Automatic at 0 and 350 or 1900 mV
Power Supply
Power Consumption
Environment
Protection
Dimensions
Weight
Contact output SPDT 5A-250 Vac, 5A-30 Vdc (resistive load); fuse: 5A, 250V
Contact output SPDT 5A-250 Vac, 5A-30 Vdc (resistive load);
fuse: 5A, 250V
115 Vac ±10% or 230 Vac ±10%; 50/60 Hz; fuse: 400 mA, 250 V
15 VA
0 to 50°C (32 to 122°F); RH max. 85% non-condensing
IP 54
221 x 181 x 86 mm (8.7 x 7.1 x 3.4’’)
1.4 kg (3.1 lb.)
BL 7917
BL 7916 / BL 7917
Pressure (bar)
Flow Rate (LPH)
0.5
13.3
1.0
11.7
2.0
10.1
3.0
9.0
ORP Controller and Pump
•
•
•
•
ORP controller and dosing pump in one compact unit.
4.0
7.8
±5 mV accuracy with unbeatable performance.
Isolated 4 to 20 mA recorder output.
Proportional dosing slows the pump down when the measured ORP level
approaches the set value which avoids overdosage of oxidizing or reducing agents.
• Alarm contact is activated whenever the ORP reading varies more than 200 mV
from the set point.
• Auxiliary contacts allow the user to attach a mixer or priming pump that is activated
only when the pump is dosing.
• PVDF, FPM/FKM and PTFE materials are used for parts that come into contact with liquid.
220/240V ±15%;
50/60Hz version available
(BL 7917D)
SPECIFICATIONS
Range
Resolution
BL 7917U is supplied with discharge and suction valves, polyethylene
tubing, 110/115V power cable and instructions.
ACCESSORIES:
Input Impedance
HI
HI
HI
HI
HI
HI
HI
HI
HI
Dosage
46
721101 Pumphead, O-ring and screws
721102 Discharge valve assembly
721103 Suction valve assembly
721004 Injection valve assembly (required)
721005 Foot valve assembly (required)
721008 Ceramic weight (4 pcs.)
7020L 200/275 mV test solution, 500 mL
7091L Reducing solution, 500 mL
7092L Oxidizing solution, 500 mL
Flow Rate
1 mV
±5 mV
See table above
1012 Ohm
proportional, oxidizing or reducing, user selectable
Recorder Output
4-20 mA (isolated)
Dosing Contact
Alarm Contact
Power Supply
110/115V ±15%; 50/60Hz (40W)
Environment
Dimensions
181 x 221 x 142 mm (7.1 x 8.7 x 5.6’’)
Weight
®
BL 7917
-999 mV to +999 mV
5th
5 kg (11 lb.)
Edition
HI 9935
pH & TDS Proportional
Control for Fertigation
• 2-in-1: pH and TDS
• Automatic Temperature
Compensation
• Alarm Relay
HI 9935 is a 2-in-1 pH and TDS controller engineered for dosage of fertilizer solutions
in hydroponics.
SPECIFICATIONS
Range
Resolution
Input Impedance
Calibration
Setpoint
Temp. Compensation (TDS)
Proportional Control
Dosing Contact
Alarm Relay
HI 9935 measures pH from 0.00 to 14.00 and TDS from 0 to 1999 ppm. Two separate
setpoints can be user-adjusted from 4 to 7 pH and 900 to 1800 ppm (mg/L). The relays
are activated when pH exceeds the setpoint or TDS falls below the desired value. Two
pumps or electro-valves can be wired directly to the controller and be powered through
the terminals. Independent proportional
HI 9935
settings for pH and TDS can be adjustpH: 0.00 to 14.00; TDS: 0 to 1999 ppm (mg/L)
ed from 0 to 90 seconds, 0 to 2.0 for pH
pH: 0.01; TDS: 1 ppm (mg/L)
and 0 to 400 ppm for TDS. A ground
pH: ±0.02; TDS: ±2% F.S.
probe can be connected to the appro12
10 Ohm
priate terminals to eliminate interference
Manual, 2 point for pH and 2 point for TDS, with trimmers on the front panel
and prolong the pH electrodes’ life.
2, selectable from 4.00 to 7.00 pH and from 900 to 1800 ppm
0.65 ppm = 1 μS/cm
Automatic, 0 to 50°C (32 to 122°F) with ß = 2%/°C
Adjustable from 0.00 to 2.00 pH and from 0 to 400 ppm, time cycles from 0 to 90 seconds
HI 9935 is supplied with instruction manual.
2 powered terminals for pH and TDS corrections (240 V) Max. 2A, 1,000,000 strokes activated when pH >
setpoint and TDS reading < setpoint, respectively
1, activated when pH varies more than a selectable value (0.5 to 2.5 pH) from setpoint or when
max dosage time for pH (adjustable from 1 to 10 minutes) elapses; or when TDS differs more
than a selectable value (50 to 450 ppm) from setpoint or when max dosage time for TDS
(adjustable from 1 to 10 minutes) elapses (isolated, Max 2A-240 V, resistive load, 1,000,000 strokes)
Power Supply
Environment
Dimensions
Weight
110/115 Vac ±10% or 220/240 Vac ±10%; 50/60 Hz
-10 to 50°C (14 to 122°F); RH max 95% non-condensing
221 x 181 x 86 mm (8.7 x 7.1 x 3.4’’)
1.6 kg (3.5 lb.)
HI 9913
pH & EC Proportional
Control for Fertigation
a=1
a=2
HI 9935-a
ACCESSORIES:
HI 7004/1L pH 4.01 buffer sol., 1 L
HI 7007/1L pH 7.01 buffer sol., 1 L
HI 70442L 1500 ppm cal. sol., 500 mL
• 2-in-1: pH and Conductivity
• Automatic Temperature
Compensation
• Alarm Relay
HI 9913 is a 2-in-1 pH and conductivity controller engineered for cost-effective dosage of fertilizer
solutions in hydroponics. Two separate set points can be user-adjusted from 4 to 7 pH and
1.00 to 4.00 EC (mS/cm). The relays are activated when pH exceeds the set point or conductivity
falls below the desired value. Two pumps or electro-valves can be wired directly to the controller
and be powered through the terminals. The operator can adjust two independent proportional
settings for pH and conductivity. The time cycle is adjustable from 0 to 90 seconds, while the
proportional band is 0 to 2.0 for both pH and EC. A ground probe can be connected to the
appropriate terminals to eliminate interference and prolong the pH electrodes’ life.
SPECIFICATIONS
Range
Resolution
Input Impedance
Calibration
Setpoint
Temp. Compensation (EC)
Proportional Control
Dosing Contact
Alarm Relay
Power Supply
Environment
Dimensions / Weight
HI 9913
0.00 to 14.00 pH; 0.00 to 10.00 mS/cm
0.01 pH; 0.01 mS/cm
±0.02 pH; ±2% F.S.
1012 Ohm
Manual, 2 point for pH and 2 point for EC, through trimmers on the front panel
2, selectable from 4.00 to 7.00 pH and from 0.00 to 6.00 mS/cm
Automatic, 0 to 50°C (32 to 1226F) with ß=2%/°C
Adjustable from 0.00 to 2.00 pH and from 0.00 to 2.00 mS/cm, time cycles from 0 to 90 seconds
2 powered terminals for pH and EC dosages (240V) Max. 2A, 1,000,000 strokes activated when pH
> setpoint and when mS reading < setpoint, respectively
1, activated when pH varies more than a selectable value (0.5 to 2.5 pH) from setpoint or when max
dosage time for pH (adjustable from 1 to 10 minutes) elapses; or when conductivity varies more
than a selectable value (0.5 to 2.5 mS/cm) from setpoint or when max dosage time for EC
(adjustable from 1 to 10 minutes) elapses (isolated, Max 2A-240 V, resistive load, 1,000,000 strokes)
110/115 Vac ±10% or 220/240 Vac ±10%; 50/60 Hz
221 x 181 x 86 mm (8.7 x 7.1 x 3.4’’) / 1.6 kg (3.5 lb.)
a=1
a=2
HI 9913-a
ACCESSORIES:
HI
HI
HI
HI
7031L 1413 μS/cm cal. sol., 500 mL
7039L 5000 μS/cm cal. sol., 500 mL
47
HI 9914
Chemical Metering Pumps
Fertigation
Controller
The HANNA instruments®
Blackstone Series
• Backlit LCD
• Designed exclusively
for fertigation
• Alarm system
•
•
•
•
HI 9914 is a wall mounted fertigation controller, designed to meet specific process control requirements in agricultural, horticultural and hydroponics applications. The controller is provided with two measuring channels, one for pH and one for conductivity. The
readings are displayed simultaneously on two independent LCDs with backlight.
The conductivity probe is designed with a built-in temperature sensor which allows the
controller to automatically compensate for the temperature effect. The differential input
and the use of a matching pin prevent grounding problems and thus ensure longer life
to the pH electrode.
The controller includes two regulators for pH and conductivity, that can be adjusted from
the front panel by setting two independent thresholds. The conductivity and pH controls
are time separated and a timed operation mode avoid overdosing of fertilizer or acid.
The controller status is indicated by LED indicators on the front panel. Moreover, the
equipment is provided with a three-level sensor, to control the water level, the alarm
condition and the irrigation sequences. The instrument also features an alarm system,
which is activated when an unusual working condition occurs. A humidity detector can
be used to stop the controller if any leakage is detected.
Designed for all environments
Reliable
High quality material
Ideal for dosing nutrients & acids
Blackstone's positive displacement solenoid driven pumps use a
minimum number of moving parts, therefore reducing the chance
of mechanical failure.
Part wear and oiling associated with motor driven pumps (ballbearings, gear drives and cams) are not present in these pumps.
Blackstone pumps are more accurate than standard pumps with
the positive displacement design ensuring each stroke is identical
to the strokes before and after it, thus keeping the flow rate constant.
A wide range of Blackstone pumps with different dosing capacities
is available for your specific dosing needs. Each pump is supplied
with discharge and suction valves.
HANNA instruments® also produces polyethylene tubing, injection
fittings, ceramic weights and replacement parts.
Valve/Hose
Assembly Diagram
Water nozzle, circulation pump, feeding pump and alarm are equipped with relays.
SPECIFICATIONS
HI 9914
Range
Resolution
0.00 to 10.00 mS/cm; 0.00 to 14.00 pH
0.01 mS/cm; 0.01 pH
±5% F.S.; ±0.02 pH
Manual, 1 point for EC with slope trimmer; 2 point for pH with offset and
slope trimmers
Calibration
Setpoint
Analog Output
Timer
Feed OK Output
Humidity Sensor
Water Nozzle Output
Circulation Pump Output
Feeding Pump Output
Alarm output
Water Level Inputs
User Input
External FILL Button
Power Supply
Environment
Dimensions
Weight
2, selectable from 0.50 to 10 mS/cm and from 0.5 to 14.0 pH
0-5V±5% (0.5V/mS); 0-7 V±5% (0.5 V/pH)
Adjustable from 1 to 10 minutes
12V, 15 mA
Activated if resistivity is below 220 KOhm
2A, 220V relay
2A, 220V relay
2A, 220V relay
2A, 220V relay
Contact type water level sensors
Contact type switch
Contact type push-button
110/115 Vac ±10% or 220/240 Vac ±10%; 50/60 Hz
221 x 181 x 90 mm (8.7 x 7.1 x 3.5’’)
1.75 kg (3.9 lb.)
ACCESSORIES:
HI 3003/D Glass-body conductivity probe
with DIN connector
HI 7031L 1.41 mS/cm cal. sol., 500 mL
HI 7039L 5.00 mS/cm cal. sol., 500 mL
HI 7061L Electrode cleaning solution, 500 mL
a=1
a=2
HI 9914-a
48
®
5th
Edition
NECK
Versatility
SPECIFICATIONS
Blackstone pumps have been designed to meet the ever changing needs of industry. To accommodate diverse applications, the
pumps can be easily mounted anywhere in your plant with their
broad, flat base and mounting holes for tank, shelf or floor
mounting (horizontal). The rear of the pump housing also provides mounting holes to facilitate vertical mounting: wall, tank or
machine. With the pump valve assembly and unit controls both
located on the front of the pump, there is never a problem with
installation or flow adjustments.
Max Output
Pump Casing
Simple Operation
Blackstone pumps are equipped with a single control for pump
output. The external Flow Rate Control (potentiometer) on the
face of the pump allows you to adjust the percentage of flow
from 0 to 100% of the pump's rated capacity. This feature eliminates the need to worry about stroke lengths and power settings.
An LED indicator lights up each time a stroke begins. This allows
the user to assess the stroke rate from a distance.
High Quality Materials
Blackstone pumps have been manufactured with the highest
level of mechanical precision, from materials chosen for their
inherent ability to resist the effects of aggressive chemicals.
When you select a Blackstone pump, you are eliminating the
time consuming effort involved in picking the right material for
your application.
Materials
BL Series
See table below
Fiber-reinforced polypropylene
Pumphead in PVDF, diaphragm in PTFE, glass ball valves and O-rings in
FPM/FKM polyethylene 5 x 8 mm tubing and 3/8" injection fitting
Self-priming
Power Supply
Max Power Consumption
Protection
Environment
Dimensions
Weight
Max height: 1.5 m (5 feet)
110/115 Vac or 220/240 Vac, 50/60Hz
Approx. 200 W
IP65
165 x 194 x 121 mm (6.5 x 7.6 x 4.8’’)
Approx. 3 kg (6.6 lb.)
ACCESSORIES:
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
HI 721101 Pumphead, O-ring
and screws
HI 721102 Discharge valve assembly
HI 721103 Suction valve assembly
HI 721004* Injection valve assembly
HI 721005* Foot valve assembly
HI 721008 Ceramic weight (4 pcs.)
* Required for operation
1.5-1 1.5 LPH flow rate, 110/115 Vac power supply
1.5-2 1.5 LPH flow rate, 220/240 Vac power supply
3-1 2.9 LPH flow rate, 110/115 Vac power supply
Blackstone pumps are supplied with the highest quality material
as standard equipment, not optional. The diaphragm utilizes
one-piece construction of PTFE, which unlike conventional laminated diaphragms will stand up to the test of time and wear. Ball
valves are constructed in glass. The pumphead and O-rings are
all made of PVDF, PTFE and FPM/FKM which offer unsurpassed
resistance.
Rugged Design
Blackstone pumps are completely sealed during assembly and
offer IP65 protection against splashes and spills providing excellent protection even in hostile environments. The fiber-reinforced
polypropylene housing stands up to aggressive chemicals while
offering superior strength under tough industrial conditions.
Part#
Output
BL 20
BL 15
BL 10
BL 7
LPH
18.3
15.2
10.8
7.6
BL 5
BL 3
BL 1.5
5.0
2.9
1.5
Rated Pressure
With Large Diaphragms
GPH
BAR
PSI
4.8
0.5
7.3
4.0
1
14.5
2.9
3
43.5
2.0
3
43.5
With Small Diaphragms
1.3
7
101.5
0.8
8
116
0.4
13
188.5
Strokes/min
120
120
120
120
120
120
120
49
Chemical Dosing Pumps
Transmitters/Level Controllers
HI 8666
RH/°C Transmitter
• Sintered metal cap
• 4-20 mA output
• Dual-range transmitter
The highly accurate humidity and temperature transmitter can be
mounted anywhere in the greenhouse to relay temperature and
humidity values via an analog signal to remote panel meters or
controllers.
SPECIFICATIONS
HI 8666
RH: 0% (4 mA) to 100% (20 mA);
Temperature: -20°C (4 mA) to 60°C (20 mA)
Range
Precision
Response Time
Power Supply
Environment
Panel Cutout
Dimensions
Weight
RH: ±2% (5% to 95% RH); Temperature: ±1% F.S.
6 seconds without sintered filter; 60 seconds
with filter
10-30 Vdc
0 to 60°C
73 x 42 mm (2.9 x 1.6”)
79 x 49 x 150 mm (3.1 x 1.9 x 5.9”)
150 g (5.3 oz.)
HI 8666 is supplied with sensor protective cap, mounting brackets and instructions.
ACCESSORIES:
HI
HI
HI
HI
7111/P Spare saturation LiCl salts for low humidity calibration (15 g, 6 pcs)
7121/P Spare saturation NaCl salts for high humidity calibration (33 g, 6 pcs)
710011 Probe sintered cap
HI 7871 • HI 7873
Level Controllers
HI 7871 and HI 7873 mini level controllers are ideal for liquid level
control over distances of up to 100 meters (330 feet). They are
highly compact and will fit into tight spaces.
These easy-to-use controllers are ideal for nearly any liquid level
application, such as nutrient tank control in farming and hydroponics. These compact controllers will prevent one or more of
the nutrient tanks from running dry, assuring that the nutrient mix
is always correct.
A complete liquid level measuring system requires:
1) A controller (HI 7871 or HI 7873)
2) A bar holder with amplifier circuitry (HI 7874)
3) A package of measuring bars (HI 731324)
4) An undecal connector (HI 7164)
HI 7871 requires 3 bars, one each for low and high levels and
the third as a consent sensor.
HI 7873 requires four bars with the additional bar used for
overflow measurement.
SPECIFICATIONS
Transmission
Electrical Connection
Level Adjustment
Level Indication
HI 7871
HI 7873
Transmitter
Max 100 meters (330 feet)
HI 7164 undecal connector (not included)
High and low
High, low and overflow
High and low
High, low and overflow
3, HI 731324 (not incl.)
4, HI 731324 (not incl.)
(See accessories)
(See accessories)
HI 7874 (not included)
Output Contact
1 relay (2A/250 Vac, 30 Vdc) 2 relays (2A/250V, 30 Vdc)
Sensor Bars
Power Supply
Environment
Dimensions
Weight
50
models “/115”: 110/115 Vac; 50/60Hz; models
“/220”: 220/240 Vac; 50/60Hz
0 to 50°C (32 to 122°F); RH max 85% non condensing
83 x 53 x 95 mm (3.1 x 1.9 x 3.8’’)
250 g (8.8 oz.)
HI 7871/115 (115 Vac) is supplied complete with mounting brackets and instructions.
ACCESSORIES:
HI 7874 Level transmitter with internal amplifier
HI 7164 Undecal connector
HI 731324 Stainless steel threaded measuring bars (5)
®
5th
Edition
HI 8000 Series
HANNA instruments® Acid
Injection/pH Control Systems
True pH and Alkalinity control solutions for variable
flow greenhouse irrigation
HANNA instruments®, the world’s leader in pH technology has
worked with leading greenhouses to develop advanced system
solutions for covered crops of any type. Each system can
precisely control pH and alkalinity from 3GPM up to 200GPM.
Incorporating combined pH and flow control technology, the
HANNA solution offers features and functionality found no
where else in the industry.
Each system can be installed in-tank or directly in-line and is
custom configured and programmed to meet the pH and alkalinity requirements of any greenhouse; any crop!
HANNA’s Injection systems can be found in a number of
notable greenhouses: Orie Van Wingerden Greenhouses NJ,
Van Wingerden Greenhouses NJ, Riverside Greenhouse NJ,
Oak Hill Greenhouse MA. Additional installations include such
greenhouse leaders as Van Wingerden Greenhouses WA.
Advanced features of HANNA’s
HI 8000 Series Controllers:
• Free installation and start up
• Combined pH and flow control technology
• Multiple measuring point monitoring and control
from the point of injection to the point of delivery
— all from one central controller
• Precise fertilizer control with multiple point EC monitoring
• Automatic time or volume control from 8 to 32 zones
(solenoid valves)
• 10 easy to use programs for a variety of crops and
irrigation timetables
• Programmable starts for “hand watering” or time
scheduled activation
• Multiple alarm settings to provide maximum safety
and reliability
• PC interface capability for remote monitoring and control
• Fully upgradeable to a 4 fertilizer injection control system
• 3 year warranty on the HI 8000 Controller and free
unlimited technical support
Quality and Service
The HANNA systems are above all reliable, durable and require
little to no maintenance and each unit is backed by impeccable
training and support…
…just ask our clients!
51
Acid Injection & Control
HI 8000 Series: The heart
of HANNA’s acid injection/pH
Control Systems
8
1
2
7
3
4
6
Wall Mount
5
1. Fertilizer and acid injection indicators (LEDs)
8
2. Main pump and alarm indicators (LEDs)
3. Multiple zone valve indicators (LEDs)
4. Waterproof NEMA 4X casing
1
5. Multiple connection ports
7
6. Up to 62 selectable “screens” for readouts and programming
2
7. Touch keypad
8. Quick reference guide
3
Panel Mount
52
®
5th
Edition
BL Pumps
Injection Valves
Bleeder Valves
Quick Release
Connections
Direct Injection
Sprayer Nozzle
SPECIFICATIONS
HI 8000 Series F1 Controllers
Range
pH : 0.0 to 14.0; EC: 0.0 to 10.0 mS/cm
Resolution
0.1 pH / 0.1 mS/cm
pH: ±0.0546; EC: ±0.078 mS/cm
Typical Inputs
2 pH electrodes, 3 conductivity probes, 4 fertilizer tanks, 1 acid tank, 5 tank level controls, 1 mixing tank level control, 2 differential
pressures, 1 irrigation counter, 1 temporary break, 1 conditional stoppage
Typical Outputs
2 non-consent alarms, up to 32 zone valves, 2 filter flushing, pump, agitator, 4 fertilizer tank electro-valves, 1 pH tank electro-valve
Number of Programs
Program Method
Irrigation Capacity
Irrigation Control
Readout
Power Supply
Environment
Dimensions
10
With keypad or through a PC using proprietary software
8, 16, 24 and 32 zone valves
time/volume control, 1 to 6 different timetables per program,
20-digit, 4 level LCD with graphic symbols and messages
115V/220V; 50Hz/60Hz
HI 8002: NEMA 4X specifications
Wall mounted: 280 x 330 x 165 mm (11.2 x 13.2 x 6.6”); Panel mounted: 178 x 260 x 115 mm (7.1 x 10.4 x 4.6”)
Weight
Wall mounted: 4.95 Kg (11 lb.); Panel mounted: 3.4 Kg (7.5 lb.);
REQUIRED ACCESSORIES
HI 98143-22 pH/EC isolated transmitter, non-sourcing current type with
4-20 mA output (2 required)
Family
0: Fertigation controller with priority for pH and EC control
1: Fertigation controller with flow control (irrigation counter)
2: Fertigation controller with flow control, pH dosage and EC monitor
4: Fertigation controller with water mixing system (circulation pump)
Version
1: panel mounted
2: wall mounted (not for “4” family)
Number of sectors
01: 8 sectors
02: 16 sectors
03: 24 sectors
04: 32 sectors (where available)
HANNA flat-tip In-line pH
electrodes fit right into your
irrigation system.
Firmware language
00: English
01: Spanish
02: Italian
03: Portuguese
Use the HANNA HI 60542
screw type electrode
holder for a perfect fit.
04: Dutch
05: French
06: Greek
07: Arabic
Power Supply
U: 115 Vac
D: 230 Vac
OTHER ACCESSORIES
HI 80
HI 60542 2" NPT in-line PVC and ORP electrode holder ideal for
installation directly in pipes. The HI 60542 has been designed
specifically to be used with HANNA’s ¾" process pH and ORP electrodes.
53
Fertigation
Complete Greenhouse Fertigation Control
HI 10,000 series
Fertigation Systems
HANNA instruments®, the world’s leader in EC and pH control
technology has worked with leading growers to develop
advanced system solutions for crops of any type. The HANNA
Fertigation System provides precise control of pH and fertilizer
injection. Unlike flow driven systems of the past, the HANNA
Fertigation System constantly measures the actual EC and pH
the water, allowing the system to add the precise concentration
of fertilizer directly to the irrigation supply. The HANNA System is
a bypass system
which does not
Above all,
limit line flow or
HANNA
pressure.
This
systems
allows the user to
are reliable,
inject fertilizer from
durable and
5 GPM up to 300
require little to no maintenance.
GPM accurately.
Each of our units are backed by
The HI 8000 series
impeccable training and support…just
controller included
ask our clients!
with the system
has 10 programs
that allow the user to set various EC and pH values for a variety
of plants. Each system allows the injection and mixing of up to 4
fertilizers. If preferred, each fertilizer injector can be set to a
specific percent, allowing the user to mix combination fertilizers
from basic N - P - K elements, providing a considerable cost savings.
The HANNA Fertigation System also controls up to 32 irrigation
valves for complete automation of the fertigation process.
Quality and
Service
Features
• Precise control via continuous EC
and pH monitoring
• 8 to 300 GPM flow rate range
• 65 to 75 PSI operating range
Request a Free Brochure or CD!
2
CD features the HI 10,000 at a customer Location as well as
interviews and system overview.
Year Warranty
or Find out more online!
http://www.hannainst.com/fertigator
(excluding probes)
HANNA’s Fertigation and pH Control Systems can
be found in a number of notable greenhouses:
Van Wingerden Greenhouses NJ, Gro-Rite NJ, Van
Vugt NJ, Michael’s Greenhouse CT. Additional
installations include such greenhouse leaders
such as OVW Greenhouse NJ, and De Groot Greenhouse NJ, Van Wingerden
Greenhouses WA.
Pro’s
Choice
• Bypass system — unit does not interfere with
main line flow
SPECIFICATIONS
• 3 fertilizer injectors and 1 mild acid
Range
• Make your own combination fertilizer
Resolution
— Each fertilizer can be set to a specific percent.
0.1 pH / 0.1 mS/cm
• Control over 32 valves — valves can be
controlled sequentially, or x 2, x 3 …up to x 8 at once
• 10 programs for various EC and pH
set-points and fertilizer percentages
HI 8000 Series F1 Controllers
pH : 0.0 to 14.0; EC: 0.0 to 10.0 mS/cm
Typical Inputs
Typical Outputs
pH: ±0.0546; EC: ±0.078 mS/cm
2 pH electrodes, 3 conductivity probes, 4 fertilizer tanks, 1 acid tank, 5
tank level controls, 1 mixing tank level control, 2 differential
pressures, 1 irrigation counter, 1 temporary break, 1 conditional stoppage
2 non-consent alarms, up to 32 zone valves, 2 filter flushing, pump,
agitator, 4 fertilizer tank electro-valves, 1 pH tank electro-valve
• Programs can be triggered by time,
external switching, and/or flow
Number of Programs
Program Method
With keypad or through a PC using proprietary software
• Flow activated to allow for spot
watering — timer adjustable
Irrigation Capacity
1, 4, 8 and 32 zone valves
• Control agitators and filter cleaning
• Alarm Control and Redundant
Monitoring
• GSM compatible for remote monitoring
and control from PC
54
Irrigation Control
Readout
time/volume control, 1 to 6 different timetables per program,
20-digit, 4 level LCD with graphic symbols and messages
Power Supply
115V/220V; 50Hz/60Hz
Environment
HI 8002: NEMA 4X specifications
Dimensions
Wall mounted: 280 x 330 x 165 mm (11.2 x 13.2 x 6.6”);
Panel mounted: 178 x 260 x 115 mm (7.1 x 10.4 x 4.6”)
Weight
®
10
5th
Wall mounted: 4.95 Kg (11 lb.); Panel mounted: 3.4 Kg (7.5 lb.);
Edition
Warranty/Returns
Limited Warranty
HANNA instruments® products are manufactured in our ISO 9001 facilities, meeting the highest quality standards in the industry. HANNA’s high standards also
apply should a product be returned due to defects in material or workmanship. Our extensive warranty extends up to three years on some products.
Limitations: Warranted products may be returned for repair or replacement only at the discretion of HANNA instruments®. In some circumstances, remedy may
constitute refund for the price paid for the product.
The warranty period commences from the original date of sale to the user or a maximum of 18 months from factory ship date. Warranty is valid only when the product is
used under normal conditions and in accordance with operating limitations and prescribed maintenance procedures. The express warranty stated previously is the
only express warranty given by HANNA to the end-user buyer. HANNA expressly disclaims any warranties implied by law, including but not limited to warranty of
merchantability of fitness for a particular purpose. HANNA shall not be liable for any individual or consequential damages of any kind for breach of any warranty,
negligence, on the basis of strict liability or otherwise. HANNA’s warranty periods are:
5
3
3
2
2
2
2
2
1
1
6
6
years
years
years
years
years
years
years
years
year
year
months
months
HI 221, HI 222 & HI 223
HI 901 & HI 902
Wine Line Photometers, HI 120, HI 110, HI 250 & pH 300 series, HI 4200 series, HI 255 Bench Top Meters
HI 10,000 Fertigator, Suction Lysimeter
Portable Meters
Bench Meters not mentioned above
Printing Meters
Stirrers & Industrial Meters
Dosing Pumps
Waterproof Testers
Testers & Pocket-size Thermometers
Electrodes & Probes
Instrument Service:
Warranty and non-warranty service, replacement, recalibration and repairs are performed by factory trained service technicians at HANNA’s Woonsocket, RI
Technical Service Center. All items must have a Return Goods Authorization (RGA) number that can be obtained by contacting the HANNA Technical Service
Department. The RGA number should be clearly marked on the outside of the box and the unit shipped prepaid and insured. Any product not bearing an RGA
number will be refused. All products returned for warranty repair or replacement MUST be preceded or accompanied with proof of purchase, such as the original
invoice or packing slip. Under special circumstances it may be deemed necessary by HANNA instruments® to issue a Return In Advance (RIA). In such cases, the
defective materials must be returned to HANNA within 30 days. Materials not returned within 30 days become chargeable. Materials must be packed properly to
avoid damage during transport, which would render the warranty null and void. The sender is responsible for expediting any damage claims placed against the carrier.
A flat minimum service charge of $60.00 (per hour) applies to non-warranty repairs or recalibration. Any materials returned for repair which are considered non-warranty may be serviced at the previously stated hourly cost (excluding parts) following subsequent notification and approval of such.
Product Return and Exchange
Returning Merchandise:
Should an instance occur when a product may need to be returned for exchange or credit, or should a discrepancy occur in a packing slip, HANNA instruments®
must be contacted to obtain a Return Goods Authorization Number (RGA). Please follow these steps:
1.
Within 30 days of receipt of merchandise call HANNA’s Technical Service Department to obtain a Return Goods Authorization Number.
2.
HANNA will issue a Return Goods Authorization Number.
3.
The number must be clearly marked on the outside of the package being returned. Shipments not bearing a Return Goods Authorization
Number will be refused.
4.
Credit returns may be subject to a 25% restocking fee.
Terms and Conditions
Return shipments must meet the following requirements to be accepted for credit:
1.
Products must be returned in the original packaging with labeling not defaced. All items returned will be inspected for credit worthiness.
Credit will only be issued for product returned in like-new condition. No credit will be issued for product, which is not received in
like-new condition.
2.
All freight charges are the responsibility of the customer.
3.
All chemicals and reagents being returned must be packaged in accordance with U.S. Department of Transportation regulation. Only unopened chemicals
and reagents may be returned.
HANNA instruments® reserves the right to change or modify the design of its products at any time without advance notice.
55
HANNA instruments®, Inc.
Highland Industrial Park
584 Park East Drive,
Woonsocket, RI 02895
phone:
(800) 426-6287
fax:
(401) 765-7575
e-mail:
[email protected]
web:
www.hannainst.com
Authorized Distributor
w w w. h a n n a i n s t. c o m / u s a
P/L AGCATED5 1.0 PRINTED IN USA

www. hannainst.com/usa

Transcription

Similar documents

dl-100 black box - Milwaukee Instruments

REAL UV254 PORTAbLE METERs

Home Theater Color Calibration Spyder3TV™ Offers the

corneometer

Bovine • Equine • Ovine • Caprine • Porcine - vaucluse

Preoperative Measurements and Intraocular Lens

pelvic Neuromonitoring

Video Borescope RIGEL UF 4.0mm Brochure

Untitled - Global Drilling Support

the esmil approach