Nivo 2x2 Instructions

nivo
TM
FNVL 2x2
AVOID ALL CONTACT WITH LED SURFACE, LEDs ARE EASILY DAMAGED!
key
focal point
power off
suction cups
(FLUSH LENS ONLY)
power on
attention
solid diffuser
hollow diffuser
LENS MOUNTING GUIDE
9/16" GRID HOUSING (G2, G3, T2)
15/16" GRID HOUSING (G1, T1)
SHIELDING
MOUNTING
LENS RAIL POSITION
SHIELDING
MOUNTING
LENS RAIL POSITION
AC1, AC3, AC5, AC7
AX3, AX5, AX7
G3, T2
1
T1
5
G2
2
AC1, AC3, AC5, AC7
AX3, AX5, AX7
G1
6
ACZ, AC2, AC4, AC6
AX2, AX4, AX6
G3, T2
3
T1
7
G2
4
G1
8
ACZ, AC2, AC4, AC6
AX2, AX4, AX6
LENS RAIL
LENS RAIL POSITION
MATCH PART NUMBERS FOUND ON
LENS AND HOUSING PACKAGING
LABELS FOR CORRECT PAIRING
1
2
x4
3
x4
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
Luminaires must be installed by a qualified electrician (check with local and national codes for proper installation).
To prevent electrical shock, diconnect electrical supply before installation or servicing.
IS0516 REV. E
2016 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com
1 of 3
4
5
7
8
x4
make electrical connections
6
x4
CONNECT LENS LANYARD TO HOUSING.
DRYWALL INSTALLATION
1
2
see focal point frame kit
instruction sheet IS160
3
make electrical connections
DRIVER SERVICE
1
1a
DISCONNECT LENS LANYARD FROM HOUSING
USE INCLUDED SUCTION CUPS
FOR REMOVAL OF FLUSH LENS
2
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
Luminaires must be installed by a qualified electrician (check with local and national codes for proper installation).
To prevent electrical shock, diconnect electrical supply before installation or servicing.
IS0516 REV. E
2016 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com
2 of 3
EMERGENCY
SEE BATTERY MANUFACTURER
INSTRUCTIONS
emergency maximum mounting height:
18.00'
0-10V DIMMING & NON-DIMMING STANDARD WIRING
(+)*
GREEN
WHITE (NEUTRAL)
BLACK (LINE)
LED
(-)*
GRAY (-)
PURPLE (+)
**OPTIONAL**
0-10V DIMMER
*OUTPUT WIRE VARIATIONS:
RED (+), BLUE (-)
RED (+), BLACK (-)
BLACK (+), YELLOW (-)
PURPLE
GRAY
(individually capped at factory
for non-dimming applications)
(if shorted together, fixture will
automaticaly dim to lowest setting)
REFERENCE DRIVER MANUFACTURER’S SPEC SHEETS FOR DRIVER SPECIFIC WIRING DIAGRAMS.
EMERGENCY LUMINAIRES WIRED ACCORDING TO BATTERY MANUFACTURER’S INSTRUCTIONS.
Contractor is responsible for adequately reinforcing walls and/or ceilings to support luminaire weight. Focal Point, LLC accepts no responsibility for inadequately reinforced walls and/
or ceilings. The information contained in this drawing is the sole property of Focal Point, LLC. Any reproduction in part or whole without the written permission of Focal Point, LLC
is prohibited. US Patents: D605,340; D605,341; D605,342; D608,490; D620, 190S. European Patents: 001596313-0001, 001596313-0002, 001596313-0003, 001596313-0004,
001596313-0005, 001596313-0006, 001596313-0007, 001596313-0008, 001596313-0009. Canadian Patents: 130763, 130764, 130765, 130766.
IS0516 REV. E
2016 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com
3 of 3