the 2016 guide - National Precast Concrete Association

Transcription

Gaylord Opryland I Nashville, TN I March 3-5, 2016
Get the
Show App
precast.org
pci.org
caststone.org
Precast University starts on page 18.
ThePrecastShow.org
BOOTH 856
BOOTH 681
The Precast Show 2016 3
BOOTH 670
THE PRECAST SHOW AT A GLANCE
For a complete schedule, turn to each association’s pages listed below. For the latest updates
and to make the most of your Precast Show experience, download the app at precast.org/app.
SHOW FLOOR HOURS
PRECAST VILLAGE HOURS
Gaylord Opryland Convention Center • Ryman Hall C
(Open to all registered attendees)
THURSDAY, MARCH 3
2:00 p.m. – 7:00 p.m.
The Precast Show Grand Opening
Reception On Trade Show Floor
4:00 p.m. – 7:00 p.m.
(Includes appetizers and host bar)
Noon – 1:30 p.m.
SATURDAY, MARCH 5
11:00 a.m. – 3:00 p.m.
The Precast Show
Buffet lunch on trade show floor
FRIDAY, MARCH 4
Noon – 6:00 p.m.
PCI Poster Presentations
1:00 p.m. – 5:00 p.m.
SATURDAY, MARCH 5
11:00 a.m. – 3:00 p.m.
FRIDAY, MARCH 4
Noon – 6:00 p.m.
The Precast Show
THURSDAY, MARCH 3
2:00 p.m. – 7:00 p.m.
Noon – 1:30 p.m.
THE PRECAST SHOW
EDUCATION
Precast University
18 – 21
Concrete Production
22 – 24
Finance & Marketing
24 – 25
Production Management &
REGISTRATION HOURS
Ryman Hall C Foyer
TUESDAY, MARCH 1
7:00 a.m. – 6:00 p.m.
WEDNESDAY, MARCH 2
6:00 a.m. – 7:00 p.m.
THURSDAY, MARCH 3
6:00 a.m. – 7:00 p.m.
Quality Control
26 – 27
Leadership
28 – 29
Sponsored Education
29
THE PRECAST SHOW
PLANT TOUR
THURSDAY, MARCH 3
6:00 a.m. – 9:00 a.m. Plant Tour Breakfast
6:30 a.m. – 8:45 a.m. Tour A
FRIDAY, MARCH 4
7:00 a.m. – 6:00 p.m.
7:45 a.m. – 10:00 a.m. Tour B
SATURDAY, MARCH 5
7:00 a.m. – 5:00 p.m.
Bus departure time and location are listed on badge
6 The Precast Show 2016
9:00 a.m. – 11:15 a.m. Tour C
itinerary. Tour departs and returns to Gaylord Opryland.
CRANE OPERATOR
CERTIFICATION UPDATE
SCHEDULE OF
ASSOCIATION EVENTS
THURSDAY, MARCH 3
3:00 p.m. – 4:00 p.m.
NPCA
Pages 30 – 35
Introduction31
NPCA Schedule of Events
32 - 34
Special Events
35
Pinnacle Presentations and Award
Plant Certification Awards and Anniversaries
Creative Use of Precast Awards
Sustainability Awards
Master Precaster Alumni Bash 2016
Near Precast Village
WOMEN IN PRECAST
RECEPTION
THURSDAY, MARCH 3
7:00 p.m. – 8:30 p.m.
(by invitation only)
OPTIONAL EVENTS
THURSDAY, MARCH 3
A Legendary Home: Fontanel Mansion
9:00 a.m. – 11:15 a.m.
itinerary. Tour departs and returns to Gaylord
Opryland.
PCI Convention and National Bridge
Conference
Page 36 – 43
Welcome38
PCI Schedule of Events
39
Education40
Events41
Sponsors42
PCI Student Poster Information
43
CPCI
Pages 44 – 46
Introduction45
CPCI Program at a Glance
46
CSI
Pages 48 – 50
Introduction49
CSI Seminars
50
SATURDAY, MARCH 6
Honky-Tonk Hoedown at the
Wildhorse Saloon
6:30 p.m. – 10:00 p.m.
Buses depart and return to Gaylord Opryland.
TABLE OF CONTENTS
THE PRECAST SHOW
Precast Show at a Glance . . . . . . . . . 6 – 7
Precast Show Sponsors . . . . . . . . . . . . 9
Plant Tour . . . . . . . . . . . . . . . . . . 12
Optional Tour . . . . . . . . . . . . . . . . 13
Crane Certification Update . . . . . . . . . . 14
Women in Precast Reception . . . . . . 14 & 41
Honky-Tonk Hoedown . . . . . . . . . . . . 15
Gaylord Opryland Resort and Convention Center
Map . . . . . . . . . . . . . . . . . . 16 – 17
THE PRECAST SHOW EDUCATION . . . 18 –
Precast University . . . . . . . . . . . 18 –
Concrete Production . . . . . . . . . . 22 –
Finance & Marketing . . . . . . . . . . 24 –
Production Management &
Quality Control . . . . . . . . . . . . 26 –
Leadership . . . . . . . . . . . . . . . 28 –
Sponsored Education . . . . . . . . . . .
29
21
24
25
27
29
29
NPCA ACTIVITIES
Introduction . . . . . . . . . . . . . . . . . 31
NPCA Schedule of Events . . . . . . . . 32 - 34
Special Events . . . . . . . . . . . . . . . . 35
Pinnacle Presentations and Award
Plant Certification Awards and Anniversaries
Special Events (Continued) . . . . . . . . . . 35
Creative Use of Precast Awards
Sustainability Awards
Master Precaster Alumni Bash 2016
PCI ACTIVITIES
Welcome . . . . . . . . . . . . . . . . . . .
PCI Schedule of Events . . . . . . . . . . .
Education . . . . . . . . . . . . . . . . . .
Events . . . . . . . . . . . . . . . . . . . .
Sponsors . . . . . . . . . . . . . . . . . . .
PCI Student Poster Information . . . . . . .
CPCI
Introduction . . . . . . . . . . . . . . . . . 45
CPCI Program at a Glance . . . . . . . . . . 46
CSI
Introduction . . . . . . . . . . . . . . . . . 49
CSI Seminars . . . . . . . . . . . . . . . . . 50
Exhibitor Directory . . . . . . . . . . . . . 52
Buyer’s Guide . . . . . . . . . . . . . . . 100
Advertisers Index . . . . . . . . . . . . . 120
BOOTH 424
38
39
40
41
42
43
PRECAST SHOW SPONSORS
(As of 1-12-16) For the latest updates, please visit ThePrecastShow.org
PREMIER SPONSOR
PLATINUM LEVEL
titaniisoftware.com
GOLD LEVEL
SILVER LEVEL
70
MOBILE APP – TRADE SHOW FLOOR
SHUTTLE BUS
MASTER PRECASTER
ALUMNI BASH
BOOTH 418
RELAX!
Take a break in The Precast Village located on the show floor.
• Shop at The Precast Village
• Put your feet up
• Enjoy a relaxing cup of coffee
• Read the industry’s leading publications
Sponsored by Our Media Partners
THE PRECAST SHOW PLANT TOUR
THURSDAY, MARCH 3
Production Facility Size: 40,000 square feet
6:00 a.m. – 9:00 a.m. Plant Tour Breakfast
6:30 a.m. – 8:45 a.m. Tour A
Number of Employees: 114
7:45 a.m. – 10:00 a.m. Tour B
9:00 a.m. – 11:15 a.m. Tour C
Property: 24 acres
Years in Business: 19
Products: Architectural precast
Equipment: 2-yard Mixer Systems turbine mixer; 1.5-yard Mixer
Member Cost: $95
Systems turbine mixer
Nonmember Cost: $195
Interesting Jobs and Projects:
GATE PRECAST COMPANY
Glenstone II, Potomac, Md.
Ashland City, Tenn.
Omni Hotel, Nashville, Tenn.
Plant Hosts:
St. Regis Hotel, Atlanta, Ga.
William G. Henderson, Vice President, Operations
Steve Brock, Senior Vice President, Engineering
Jim Pearson, Plant Manager
Randy Moon, Assistant Plant Manager
Marshall Basset, Regional Sales Manager
I-Fly (indoor skydiving), multiple locations
Lucas Oil Stadium, Indianapolis, Ind.
LDS Temple, Kansas City, Mo.
Nordstrom, Nashville, Tenn.
Vanderbilt ES Building, Nashville, Tenn.
Camera/Video Equipment Allowed: No
OPTIONAL TOUR
A Legendary Home: Fontanel Mansion
Additionally, Dale Morris and Marc Oswald, the home’s current
THURSDAY, MARCH 3
from the artists they manage, including Kenny Chesney,
9:00 a.m. – 11:15 a.m.
Member Cost $95
Child: $35
Unique would be an understatement when trying to describe
the Fontanel Mansion, the house that Barbara Mandrell built
in 1988 in Whites Creek, Tenn. It was her primary home for
years and acted as a gathering place and getaway for countless
country music stars. Take a tour to see and touch artifacts of all
sorts that were brought to the house by Barbara or left there by
owners, installed elements from their own private collections
Alabama, Big & Rich, Gretchen Wilson and more.
If you’re a history buff, you’ll be interested to know that the
land surrounding the mansion is where Jesse and Frank James
came to hide out after the gang’s ill-fated Northfield, Minn.,
bank robbery in 1869. And a few years prior to the James boys
gathering here, the Confederate Cavalry used the land as a
place to assemble during the Battle of Nashville.
But there’s even more to Fontanel Mansion’s story than that.
Come visit and experience all that is Fontanel Mansion. The tour
concludes at The Farm House Store & Coffee Shop, where you
can browse through their collection of unique souvenirs.
famous guests.
TRADE SHOW EXTRA: OSHA CRANE
OPERATOR CERTIFICATION UPDATE
THURSDAY, MARCH 3
3:00 p.m. – 4:00 p.m.
Location: Trade Show Floor –
Near Precast Village
Panelists
Dean McKenzie, OSHA Deputy Director
of OSHA’s Directorate of Construction,
Washington, D.C.
Steve Hawkins, Tennessee OSHA
Administrator
Andy Winkler, Wieser Concrete Products
Inc., Boom Truck Task Force chairman
Marti Harrell, NPCA, Vice President of
Education and Training
The OSHA requirement to certify crane operators goes
you can take to ensure your company is in compliance and
into effect in 20 months. Will you be prepared? NPCA will
answers to your questions. Other panelists include Andy
host a panel discussion on the OSHA crane certification
Winkler, NPCA Boom Truck Task Force chairman and Marti
requirement that will go into effect in November 2017.
Harrell, NPCA Vice President of Education and Training, who
OSHA’s Dean McKenzie and Steve Hawkins will join the
will discuss how NPCA is working to help members meet
panel to provide an overview of the requirement, steps
this important deadline.
WOMEN IN PRECAST RECEPTION
THURSDAY, MARCH 3 • 7:00 p.m. – 8:30 p.m.
(by invitation only)
This is an excellent opportunity for women in the precast
industry to network with other professionals.
Hors d’oeuvres will be served along with an open bar.
SPONSORS
HONKY-TONK HOEDOWN
AT THE WILDHORSE
SALOON
An Exclusive Precast Industry
Networking Event
The precast/prestressed concrete industry comes together at
the world-famous Wildhorse Saloon in the heart of downtown
Nashville. Enjoy an evening of good-time honky-tonkin’ fun,
award-winning southern smokehouse cuisine, beverages,
live music, line dancing and networking as we take over the
Wildhorse for this exclusive event.
SATURDAY, MARCH 6
6:30 p.m. – 10:00 p.m.
Buses depart and return to Gaylord Opryland
Member Cost with a Package: $115
Member Cost without a Package: $165
Child: $45
THE PRECAST SHOW AT THE GAYLORD OPRY
YLAND RESORT AND CONVENTION CENTER
PRECAST UNIVERSITY
Take your career to a new level with Precast University
Now you can take charge of your career. NPCA’s Master Precaster program will
help position you for continued advancement in the precast industry. Offered as
part of NPCA’s Precast University, the Master Precaster program includes precastspecific training with comprehensive education courses for production, safety,
technical, quality control and leadership. Developed in conjunction with industry
experts, producers, DOTs and academia, the Precast University curriculum
is a perfect complement to employees new to the industry needing a broad
knowledge base, and to those employees with precast experience who want to
take the next step in their careers.
Meeting your needs
Precast University courses are offered annually at The Precast Show. Select
courses are also available online at precast.org in stand-alone format or via
webinar. NPCA makes it easy to earn your Master Precaster certificate by offering
comprehensive training with affordable, industry-specific and convenient options.
Whether you’re taking Precast University education as part of The Precast Show
experience, training your entire plant with a customized course or sitting in the
comfort of your own living room in front of your laptop, NPCA’s education is
designed to fit your needs.
Meeting the industry’s needs
NPCA is committed to providing the most comprehensive education programs to
the industry. Our Precast University curriculum is regularly reviewed by producers,
DOTs, specifiers and others involved with creating and enforcing industry
standards. This ongoing review of our curriculum ensures that as new technologies, standards and best practices are developed,
Precast University participants are receiving the very latest industry information. Additionally, NPCA works with DOTs to meet
state-specific requirements, including offering proctored exams for online education courses as required.
Master Precaster
At the top level of Precast University is NPCA’s Master Precaster. As an NPCA Master Precaster,
you will have successfully completed PQS Level I, four PQS Level II courses and the Leadership
Capstone course.
Ready to get started?
Visit precast.org to learn more about NPCA’s array of education courses and get started today.
MASTER PRECASTER REQUIREMENTS
PRODUCTION & QUALITY SCHOOL
(PQS I)
PQS II -
PQS II -
PQS II -
PQS II -
SAFETY
PRODUCTION
TECHNICAL
QUALITY
CONTROL
PQS III - LEADERSHIP
MASTER PRECASTER
Additionally, Master Precasters must complete 12 continuing
education hours every three years to maintain their designation.
NPCA’S PRECAST UNIVERSITY
As part of its mission to develop comprehensive educational resources for the precast concrete industry, NPCA provides plant
personnel with in-depth learning opportunities taught by expert industry instructors as part of Precast University. Comprised of
special-topic schools, Precast University courses involve a multi-day commitment that includes extensive curriculum and an exam.
The requirements for PQS II –
Safety have been updated to
better accommodate participants
PQS – PRODUCTION
AND QUALITY SCHOOL
LEVEL I (PQS I)
who have already earned an
OSHA Safety Card. Participants
who meet one of the following
requirements will receive full
credit for completion of
PQS II – Safety:
• Successful completion of
NPCA’s PQS II – Safety: Precast
Module AND hold a valid
OSHA 10-hour Safety Card
• Hold a valid OSHA 30-hour
Construction Safety Card
• Hold a valid OSHA Authorized
Trainer Card
If you have an OSHA 30-hour or
OSHA authorized trainer card,
you must submit a copy of your
valid OSHA card along with the
application to NPCA to receive
credit for PQS II – Safety. The
application can be found at
precast.org/oshacard.
Mel C. Marshall
Sam Lines
Mel C. Marshall, P. Eng., Mel C.
Marshall Industrial Consultants Inc.
Sam Lines, MBA, Concrete Sealants Inc.
Production and Quality School (PQS I)
is NPCA’s flagship course, and is the
perfect starting point to provide plant
personnel with the fundamentals of
quality precast concrete manufacturing.
Designed especially for all production
personnel and QC inspectors, this course
covers all aspects of manufactured
concrete production, from raw materials
to post-pour inspection, with special
emphasis on maintaining high quality
throughout the entire manufacturing
process. This course satisfies the plant
certification requirement of the current
edition of the NPCA Quality Control
Manual for Precast Concrete Plants.
Attendees who successfully complete
PQS Level I will be able to:
• Identify the key components for
making quality precast concrete and
proper handling techniques
• Describe in detail the entire
manufacturing process of producing
quality precast concrete from preproduction to post-production
• Calculate the impact of temperature
of aggregates, cement and water on
concrete mixes
• Convert metric reinforcement bar
sizes to ASTM standard reinforcing
bar sizes
• Explain the fundamental elements
of a quality concrete mix design and
troubleshoot potential mix design
flaws
• Create a quality control manual
specific to plant production practices
while incorporating industry best
practices
PQS I
Tuesday, March 1 (Day 1)
8:00 a.m. – 5:00 p.m.
Location: Ryman Ballroom D
PQS I
Wednesday, March 2 (Day 2)
9:00 a.m. – 5:00 p.m.
Please Note: Participants are required to
attend both days of class and pass the
exam to obtain a certificate of course
completion. Please make your travel
arrangements accordingly.
PQS2 – PQS II –
PRODUCTION (PQS II)
Barry Fleck
Chris Kemp
Aamer Syed
Claude Goguen
Skip Francies
Barry Fleck, A.L. Patterson Inc.
Chris Kemp, Smith-Midland Corp.
Skip Francies, A.L. Patterson Inc.
Aamer Syed, Sika Corp.
Claude Goguen, P.E., LEED AP, NPCA
PQS Level II – Production is designed
for plant personnel who will benefit
from a comprehensive understanding
of precast-specific production practices
in four key areas: lifting and handling;
reinforcement; lean manufacturing; and
patching and repair. This course goes
beyond the fundamentals explored in
PQS Level I to prepare students to think
critically about the links between these
four areas and common plant production
and safety issues. Course participants
will go in-depth in exploring these topics,
discussing best practices and learning
to address production challenges in
their plants. Shift supervisors, team
leaders, production managers, batch
plant operators, engineering and drafting
personnel, and those who aspire to
these positions should attend.
PQS Level II – Production will be able to:
• Explain the key concepts of lean
manufacturing and develop an action
plan for implementing simple lean
techniques upon returning to their
plant
• Identify the difference between
structural and cosmetic repairs and
employ the appropriate patching/
repair techniques for each
• Compare the benefits of steel and
fiber reinforcement and describe the
best applications for each
• Analyze the current lifting and
handling techniques in the plant and
assess these techniques to identify
potential areas of improvement for
plant safety
PQS II – Production
8:00 a.m. – 5:00 p.m.
Location: Ryman Ballroom C
PQS II – Production
9:00 a.m. – 5:00 p.m.
Location: Ryman Ballroom C
completion. Please plan your travel
CP1 – PQS II – SAFETY:
PRECAST MODULE
PQS3 – PQS III –
LEADERSHIP (PQS III)
Friday, March 4
8:00 a.m. – Noon
Locaton: Jackson AB
Gustavo Gonzalez,
Safe-T at Work LLC
Greg Chase, Chase
Consulting
This PQS module is a
comprehensive, precastGustavo Gonzalez
specific course that
examines safety issues associated
with the precast production process.
Course topics include: precast plant
hazards; batching plant hazards; molds
and forms; rebar and cage fabrication;
curing and finishing; overhead crane
and rigging; hand and power tool safety;
and forklifts. Upon completion of this
course, employees will be well grounded
in safety as it applies to the precast
industry. Attendees who successfully
complete the course and hold a valid
OSHA 10-hour Card can receive credit for
PQS Level II – Safety by submitting the
card information to precast.org/oshacard.
PQS Level II – Safety: Precast Module
will be able to:
• Identify potential safety hazards in the
precast plant
• Apply techniques and implement
programs to improve plant safety
• Lead toolbox talks on safety topics
• Develop action plans to address plant
safety concerns
Attendees who complete
this course will learn
valuable leadership
principles they can
immediately apply to their Greg Chase
management style in their
precast concrete manufacturing facilities.
Learn how to recruit, hire, train and
develop employees by communicating
effectively, leading by example and
celebrating success. Additional topics
include time management, goal-setting,
stress management and diversity.
Owners, managers, supervisors and
those who aspire to hold such positions
in the future are encouraged to attend
this course.
PQS Level III – Leadership will be able
to:
• Employ effective leadership skills in
precast operations
• Adapt management styles to the
diverse workforces in precast plants
• Identify effective methods to improve
employee performance
• Communicate effectively with all
employees – from hourly to senior
management
PQS III – Leadership
8:00 a.m. – 5:00 p.m.
Location: Ryman Ballroom A
PQS III – Leadership
9:00 a.m. – 5:00 p.m.
Location: Ryman Ballroom A
completion. Please plan your travel
CONCRETE PRODUCTION
The Concrete Production Track explores best practices in the precast industry and strengthens attendees’ knowledge of the fundamentals
of quality precast concrete. Courses are designed for those involved in the daily production of quality precast concrete products, and will
include safety and other topics that are appropriate for those seeking a broad range of knowledge in precast production.
CP1 – PQS II – SAFETY:
PRECAST MODULE
Friday, March 4
8:00 a.m. – Noon
Location: Jackson AB
Gustavo Gonzalez,
Safe-T at Work LLC
This PQS module is a
Gustavo Gonzalez
comprehensive, precastspecific course that examines safety
issues associated with the precast
production process. Course topics
include: precast plant hazards; batching
plant hazards; molds and forms; rebar
and cage fabrication; curing and finishing;
overhead crane and rigging; hand and
power tool safety; and forklifts. Upon
completion of this course, employees
will be well grounded in safety as
it applies to the precast industry.
the course and hold a valid OSHA 10hour Card can receive credit for PQS
Level II – Safety by submitting the card
information to precast.org/oshacard.
At the conclusion of this course, you
will be able to:
• Identify potential safety hazards in the
precast plant
• Apply techniques and implement
programs to improve plant safety
• Lead toolbox safety talks
• Develop action plans to address plant
safety concerns
CP2 – PRECAST 101
Friday, March 4
8:00 a.m. – 10:00 a.m.
Location: Jackson E
Kayla Hanson, NPCA
With the precast concrete
industry constantly
Kayla Hanson
growing, companies
are continually hiring new employees.
Ensuring those employees are able to
get up to speed quickly plus work safely
and effectively can improve teamwork,
reduce mistakes and help new hires
quickly become productive employees.
This course is intended for those who
are new to precasting and includes an
introduction to basic concepts, including
terminology, operations and equipment
as well as a review of key safety
concepts.
will be able to:
• Define precast concrete terminology
and processes
• Identify best practices for precast
concrete production
• Implement proper safety practices
CP3 – IMPACT OF CEMENT ON
PROPERTIES OF CONCRETE
Friday, March 4
8:00 a.m. – 9:30 a.m.
Location: Lincoln C
Michelle Wilson, Portland
Cement Association
This session will focus on
Michelle Wilson
the different properties
and applications of cements for use in
concrete including Portland, blended
and hydraulic cements. By looking at
both cement and concrete, attendees
will gain a better perspective on how
to troubleshoot concrete problems
including fresh and hardened concrete
properties and durability. You will learn
how to determine which cement is most
appropriate for your product to optimize
mix performance and economy.
will be able to:
• Distinguish between the
characteristics of Portland, blended
and hydraulic cements
• Define the influence of cement
on fresh properties of concrete
including workability, bleeding, heat of
hydration and setting time
• Explain the impact of cement on the
hardened properties of concrete
• Identify the applications of different
types of cement for use in concrete
CP4 – BASIC MIX
PROPORTIONING: WHAT YOU
NEED TO KNOW
Friday, March 4
10:00 a.m. – Noon
Location: Lincoln D
Terry Harris, W.R. Grace
Construction
Good control of your mix is
Terry Harris
crucial to producing quality
precast concrete. During this course,
we’ll explore the math and chemistry
behind determining the mix proportions
and how the proper raw materials, added
in the right order and properly mixed, can
yield high-quality concrete every time.
Additionally, we will discuss common
mistakes in mix proportioning and how
to avoid them.
will be able to:
• Summarize best practices when
designing a concrete mix
• Discuss the use and impact of
materials on your mix
• Give examples of common mix
proportioning mistakes and explain
how to avoid them
• Identify hardened concrete problems
tied to improper mix design
• Troubleshoot mixes
CP5 – LIFTING DEVICES FOR
PRECAST PRODUCTS
Saturday, March 5
7:30 a.m. – 9:00 a.m.
Location: Ryman
Ballroom BE
Lance Osborne, P.E.,
Meadow Burke
Lance Osborne
Have you ever wondered
why specific lifting devices are used
for specific applications? Use of the
proper lifting device for a precast piece
is crucial to the handling of the piece
and to the safety of your employees. The
proper lifting device can eliminate unsafe
situations and the need for costly repairs.
We will discuss safe lifting practices,
how proper use of lifting devices can
reduce spalling and the importance of
reviewing spalls prior to additional lifting
and repairing.
will be able to:
• Protect yourself and your employees
by using the right tool for the job
every time
• Select the proper lifting device based
on cast-in location of the precast
piece, lifting direction, handling and
orientation of final setting
producing precast concrete. Educational
backgrounds of employees can vary
greatly. While some may be very
comfortable with math, others may
struggle and this may be an impediment
to their career path within the company.
This course provides training on
mathematical concepts that apply to the
production of precast concrete. Principles
covered in this course include conversion
of units of measurement from inches to
feet, cubic feet to cubic yards and U.S. to
metric conversion. We will discuss how
to calculate areas and volumes and will
look at basic concepts of multiplication,
geometry, trigonometry and physics that
may apply to concrete testing, stripping
and lifting as well as other everyday
functions in a precast plant.
will be able to:
• Convert commonly used units of
measurement
• Calculate areas and volumes of
common precast items
• Describe forces involved when
stripping and lifting precast structures
• Explain mathematical concepts
behind common testing requirements
• Engage the embedded lifting device
with the proper hook, engineered
lifting clutch or attachment connector
CP7 – TROUBLESHOOTING
PRECAST PRODUCTION:
PROBLEMS AND SOLUTIONS
• Recognize unsafe practices and how
to address them
Saturday, March 5
8:00 a.m. – 11:00 a.m.
Location: Ryman
Ballroom F
Mel C. Marshall, P. Eng.,
Mel C. Marshall
Industrial Consultants Mel C. Marshall
Inc.
Note: If you attended the NPCA Lifting
Precast Concrete webinar in 2015, you
may be interested in this course.
CP6 – MATH FOR PRECASTERS:
IT’S ALL GREEK TO ME!
Saturday, March 5
7:30 a.m. – 9:30 a.m.
Location: Ryman Studio M
Kayla Hanson, NPCA
If A=πr2, a2+b2=c2 and
cos α+cos β=2 cos 1/2
Kayla Hanson
(α+β) cos 1/2 (α-β) look
like something that should be on an
alien spaceship – you’re not alone!
Believe it or not, these are math
equations that play an important part in
There are many components to
producing quality precast concrete
products. Raw materials, mix design,
reinforcing, consolidation and curing all
play a part in achieving the final product.
This interactive class will provide
attendees with an opportunity to learn
from an expert and from each other. Mel
will lead a discussion of best practices
and solutions to production issues that
precasters deal with every day. Bring
your questions to this session, where
we’ll address your production issues and
discuss how to resolve them.
will be able to:
• Identify sources of common precast
production challenges
• Troubleshoot quality control issues
• Take at least three new ideas back
to your plant to help improve your
production process
Note: If you attended the NPCA Mix
Design webinars in 2015, you may be
interested in this course.
CP8 – IF WE DIDN’T HAVE
REGULATIONS, WHAT WOULD
A SEPTIC TANK LOOK LIKE?
Saturday, March 5
9:45 a.m. – 11:00 a.m.
Location: Ryman
Ballroom A
John Buchanan,
P.E., University of
Tennessee
John Buchanan
For the most part, state and local
regulations dictate the shape and
size of septic tanks. Modifications are
sometimes necessary to adhere to
changing specifications, but what does
that modification really mean to the level
of treatment? Are we in fact making a
difference? What if we had the freedom
to design a better tank? What would it
look like? This session will explore the
intended function of a septic tank and how
it works as part of the on-site wastewater
treatment train. We will discuss liquid-solid
separation, organic digestion and tank
maintenance with regard to how septic
tanks are designed and constructed.
will be able to:
• Describe the hydraulic function of
septic tanks
• Explain the importance of baffles
• Identify how tank shape influences
performance
• Summarize how a maintenance
friendly tank can be a highperformance tank
Note: If you attended the What
Happens Inside a Septic Tank? course
at The Precast Show 2015, you may be
Concrete Production continues on the next page.
CP9 – OSHA’S TOP 10
VIOLATIONS AND HOW TO
PREVENT THEM
FINANCE & MARKETING
Saturday, March 5
9:45 a.m. – 11:00 a.m.
Location: Ryman
Ballroom C
David Parkhurst, CKC
CFOs, marketing personnel and those who aspire to hold such positions in the precast
When it comes to OSHA
David Parkhurst
compliance, employers
can learn a lot by reviewing the
requirements that OSHA most frequently
finds to be in violation. Knowing the
most common violations allows your
company to review your operations for
similar compliance issues and implement
corrective action before OSHA comes
calling. The list of most frequently
violated standards does not change
drastically from year to year. However,
the total number of violations cited, the
penalty amounts for those violations
and the total number of inspections do
change, giving employers insights into
how aggressively OSHA is enforcing
their standards. This course will look at
the Top 10 most frequent violations and
how to prevent them in your plant.
The Finance & Marketing Track is geared toward business owners, senior managers,
concrete industry. Expert instructors in finance and marketing will provide the latest in
philosophy and techniques. These courses will offer the opportunity to network with
fellow managers and owners to discuss common challenges.
FM1 – SELLING AND
MARKETING PRECAST
PRODUCTS AND SERVICES
Friday, March 4
FM2 – HOW TO DETERMINE
THE TRUE COST OF FLEET
OPERATIONS AND JOB SITE
DELIVERY
8:30 a.m. – 11:30 a.m.
Friday, March 4
Location: Jackson CD
10:00 a.m. – Noon
Monroe Porter, PROOF
Location: Lincoln C
Larry Powell, Gainey’s
Management
Consultants
Monroe Porter
Concrete Products Inc.
Larry Powell
Today’s sales and
Delivery costs can gobble
marketing professionals must go beyond
up on average between nine and 10
social relationships with customers to
cents of each and every one of your
develop mutually beneficial professional
sales dollars! Any expense that is 10%
alliances. Attendees will learn practical
of your business should be carefully
marketing techniques they can put to
examined to determine where you
use rather than the “pie in the sky”
can reduce costs. How well does your
theory. Discover how to differentiate
company manage your delivery costs?
your precast products and sell against
In this course, we will explore the true
specification alternatives. Sales and
costs of your delivery operation and
will be able to:
• Identify the most frequent OSHA
violations
marketing managers, inside and outside
discuss techniques you can use to
salespeople, estimators and business
manage your delivery costs.
• Implement a prevention plan for
violations
hard-hitting and thought-provoking look
at your relationship with your customers.
will be able to:
• Create a safety culture in your plant to
mitigate potential violations
owners will benefit strongly from this
• Determine cost per mile or cost per
will be able to:
• Differentiate your products and
market them effectively
• Sell value and go beyond just quoting
price
hour and when each is used
• Use internal delivery rates to manage
delivery costs
• Control third-party freight costs with
detailed knowledge of your internal
freight costs
• Identify your customers’ buying
objectives and build business-tobusiness conversations
Note: If you attended the Product
Costing: How to Calculate the True Cost
of Your Product course at The Precast
Note: If you attended the ABCs of
Show 2015, you may be interested in this
Marketing course at The Precast Show
course.
2015, you may be interested in this
course.
FM3 – THE NEXT 2 YEARS:
YOUR CASH FLOW GROWTH
AND OPPORTUNITIES
Saturday, March 5
7:30 a.m. – 9:30 a.m.
Location: Ryman
Ballroom C
Gene Marks, Marks
Group P.C.
Gene Marks
During this session, Gene
Marks will keep you on your toes with
the latest methods, ideas and thoughts
for reducing expenses and building
profits … in essence, generating more
cash for your business. You will learn
cost-effective ways for squeezing more
profits, boosting your bottom line and
keeping a few more customers happy.
We’ll cover the trends, techniques and
tactics used by business owners and
managers to maximize cash flow.
will be able to:
• Identify key internal and external
metrics
• Implement techniques for creating
budgets and forecasts
• Capitalize on cash flow trends to grow
your business
FM4 – HOW TO TEACH LUNCH
AND LEARNS
Saturday, March 5
7:30 a.m. – 9:00 a.m.
Location: Ryman Studio L
John Peterman, Concrete
Systems Inc.
Sam Lines, MBA,
Concrete Sealants Inc. John Peterman
Can you say with
confidence that the
specifiers in your area
know of all the precast
products you manufacture,
including custom
Sam Lines
products? If you can’t
say yes, then you need to reach out to
specifiers to let them know of the wide
variety and vast benefits of your precast
products. One of the most effective
ways to get your message out is to
offer lunch and learns. This interactive
course is designed for both new and
experienced staff to learn or sharpen
their skills to deliver the best possible
lunch and learn presentation. You do
not need to be a seasoned expert to
be successful. It begins with offering
the easiest ways to get lunch and learn
appointments and goes through the
steps necessary to ensure a successful
event. Rookies and veterans alike will
learn how to implement a successful
lunch and learn program. We’ll also
introduce a toolkit for teaching skills that
will include best practices and resources
to assist with presenting effectively.
will be able to:
• Land a lunch and learn appointment
by using only five words
• Effectively prepare for presentations
to customers and specifiers about
your products and positively address
any concerns they may have
• Identify what you need to bring for
your presentation
• Conduct useful follow up with
specifiers that can lead to sales
Note: If you attended the Critiquing
Your Specifier Lunch and Learn course
at The Precast Show 2015, you may be
FM5 – ADVICE FOR THOSE
FIGHTING ALTERNATIVE
MATERIALS IN THEIR MARKETS
Michael Kusch
Eric Carleton
If you’ve never lost a sale to alternative
materials, then this course isn’t for you.
However, if you have, then this course is
a must. Alternative materials are gaining
market share across our country. These
may be plastic, fiberglass or a variety of
other materials. It is clear to those in the
precast concrete industry that precast
is a strong, durable, long-term product
that stands the test of time; however, it
can be daunting to defend yourself and
your product before those who would
challenge you on those claims. During
this course, we will explore the talking
points that each precast manufacturer
needs to know when approaching a
specifier who is considering specifying
or has specified an alternative material.
We will discuss the positive aspects
of promoting precast concrete such as
strength, durability, life span and use of
local materials and labor. Further, we will
discuss how to refute alternative material
claims with regard to weaknesses of
concrete and strengths of their products.
This course will confidently arm you with
tools to help you get precast concrete in
the specifications and keep it there.
will be able to:
• Use cold, hard facts to refute the
attacks alternative material producers
are making on concrete
• Get precast concrete included in the
job specifications using tried and true
approaches based on relationships,
not scare tactics
• Have a constructive and positive
meeting with a specifier who has
chosen to specify an alternative
material – a meeting that just might
change his or her mind
Leo Feuerstein
Saturday, March 5
9:30 a.m. – 11:00 a.m.
Location: Ryman Studio L
Michael Kusch, Sherman-Dixie
Concrete Industries Inc.
Eric Carleton, P.E., NPCA
Leo Feuerstein, Western Precast
Concrete Inc.
PRODUCTION MANAGEMENT &
QUALITY CONTROL
Production Management courses are intended for those who have completed Concrete Production Track courses or PQS Level I, and those
who have baseline industry knowledge and would like advanced training. Quality Control courses are appropriate for all levels of personnel.
Because commitment to quality is of crucial importance in the precast industry, all precasters are encouraged to attend these courses.
PM1 – OSHA CRANE
CERTIFICATION UPDATE
Friday, March 4
7:30 a.m. – 8:00 a.m.
Location: Jackson CD
November 2017 is fast approaching, and
with it comes OSHA’s new requirement
for certified crane operators. This
requirement will impact the entire
precast industry – including your plant.
Join us for a discussion about the
requirement, what you need to do
in order to meet the November 2017
deadline and how NPCA is working to
make this process as easy as possible.
PM2 – WORKING WITH YOUR DOT
Friday, March 4
8:00 a.m. – 9:30 a.m.
Location: Jackson F
Richard Alvarado, Western Precast
Concrete Inc.
Randy Pace, P.E., NCDOT
Jason Tucker, P.E., TDOT
Andrew Nashawaty, Scituate Concrete
Pipe Corp.
Ron Sparks, Columbia Precast
Products
Cultivating relationships with customers
is essential for a successful business
model. Having heard of your company
is not enough. You have to become a
trusted resource. For many precast
companies, their biggest customer is
the state DOT. In this session, DOT
representatives and precasters will share
their tips, tricks and what NOT to do
when working with your DOT.
will be able to:
• Implement relationship-building tools
with your local DOT
• Identify behaviors to avoid when
working with your local DOT
• Define best practices for maintaining
your relationship with your local DOT
PM3 – DISSECTING THE ASTM
PRECAST CONCRETE RUBBER
GASKET STANDARDS
Friday, March 4
8:00 a.m. – 9:30 a.m.
Location: Lincoln D
Eric Carleton, P.E., NPCA
PM4 – RAW MATERIALS FOR
PRECAST PRODUCTS
Friday, March 4
10:00 a.m. – 11:30 a.m.
Location: Jackson F
Frank Bowen, Piedmont
Precast
ASTM published the
first rubber gasket joint
Eric Carleton
standards for precast
structures in 1955 with the introduction
of ASTM C361, followed by C443 in
1959. More recently, ASTM published
C1628 in 2006 and C1677 in 2009.
Each standard is targeted for a specific
gasketed joint application and requires
unique design and testing requirements.
As you will learn, conformance to these
standards is more than simply placing
the lowest-priced “rubber” gasket on
the end of a spigot. This course will
discuss the various ASTM gasketed joint
standards and the specific requirements
and obligations necessary to be able
to claim compliance to the standards.
We will dissect the various ASTM joint
standards into specific parts for study
and better understanding. We will also
briefly discuss the ASTM International
Consensus Standards process and how
precasters can get involved.
In this course, participants Frank Bowen
will begin by evaluating
the physical characteristics of Portland
cements, supplemental cementitious
materials, air, water, admixtures and the
various aggregates commonly available
to them in their own local markets.
The physical and performance review
of these raw materials will then be
used to determine how they affect the
performance of the overall concrete
mixtures. Students are encouraged to
bring common mix designs used in their
plant, vendor-supplied and in-house
testing data for all of their raw materials,
and a sample of their plant’s commonly
used coarse and fine aggregates to be
tested in class.
will be able to:
• Recognize what an ASTM standard
implies and does not imply
• Optimize mix designs for various
levels of concrete performance by
means of proportion changing
• Identify applications of the many
ASTM gasketed joint standards for
precast products
• Review different components within
an ASTM gasketed joint standard –
materials, design and testing
• Assure your quality control
procedures are in compliance with
ASTM standards
will be able to:
• Evaluate the quality and performance
of locally sourced materials for
designing and controlling normal
weight control mixtures
• Create quality control procedures for
all raw materials based on current
standards, local climates and product
specifications
PM5 – UNDERSTANDING
HYDRATION AND CURING OF
PRECAST CONCRETE
Saturday, March 5
7:30 a.m. – 9:30 a.m.
Location: Ryman
Ballroom A
Claude Goguen, P.E.,
LEED AP, NPCA
Claude Goguen
A producer can have the
highest quality concrete materials, an
excellent mix design and a state-of-theart batching system, but without proper
curing the product will not perform to
full potential. Curing is a key element
to any precast concrete manufacturing
process and has a strong influence on
the properties of the hardened product.
The curing process is intended to
allow hydration to occur. Hydration of
cementitious materials and water is
complex and involves many different
reactions, often occurring at the same
time. These reactions can be affected
by many factors, including cement type,
temperature and use of other admixtures
or supplementary cementitious
materials. During this course, we will
delve into world of hydration and look
at the process on a micro level. We will
examine how different minerals and
constituents react once water is added
to cement. We will also discuss different
types of curing.
will be able to:
• Explain the different stages of hydration
• Describe the effects of temperature
on hydration and curing
• Summarize how steam curing works
PM6 – MIX DESIGN WORKSHOP
Saturday, March 5
8:00 a.m. – 11:00 a.m.
Location: Ryman
Studio FG
Dr. Heather J. Brown,
Middle Tennessee
State University
Dr. Heather J. Brown
This session will review the basic
understanding of volume-based concrete
mix designs that can be sensitive to
adjustments made for flow, air and
strength. Determine the influence of
aggregate sourcing and grading. Learn
how aggregate gradation can affect
water demand and what we mean
by Fineness Modulus. We’ll discuss
the specific gravity of each batching
material, why it is important and the
impact it has on mix designs. When you
replace cement with a supplementary
cementitious material such as fly ash,
do you take into account the viscosity
of the paste? We will review why
you must do so and learn to design a
self-consolidating concrete mix to limit
variation.
will be able to:
• Interpret performance-based mix
designs
• Analyze effects of mix design
variations
• Diagnose potential mix design
problems and describe how to resolve
them
• Troubleshoot SCC issues and adjust
mix designs to limit variation
Note: If you attended the NPCA Mix
Design Webinars in 2015, you may be
PM7 – OPTIMIZED COMBINED
AGGREGATE GRADING FOR
PRECAST CONSTRUCTION
Saturday, March 5
9:30 a.m. – 11:00 a.m.
Location: Ryman
Ballroom BE
Jay Shilstone, Command
Alkon Inc.
Jay Shilstone
Optimized combined
aggregate gradings and specifications
have been a hot topic in the cast-in-place
and ready mixed side of the concrete
industry, but have generated relatively
little discussion on the precast side. In
fact, given the critical nature of earlyage loading, durability requirements
of transportation and environmental
structures, and the production of selfconsolidating concrete, determining the
best combination of aggregates is even
more critical for the precast industry. You
will learn about field experiences using
well-graded combined aggregates, the
application of well-graded aggregate
concepts to the precast industry and the
use of optimized aggregate gradings in
SCC.
will be able to:
• Analyze research concerning the use
of well-graded combined aggregates
• Determine the impact of combined
aggregate grading on architectural
precast
• Identify common problems associated
with combined aggregate grading
specifications
PM8 – THE STRUCTURAL
EFFECTS OF HOLES IN
PRECAST PRODUCTS
Saturday, March 5
9:45 a.m. – 11:00 a.m.
Location:
Ryman Studio M
Rick Amlin, P.E., Delta
Engineers
Rick Amlin
This course will provide
a qualitative overview of how holes in
precast products affect the structural
performance of flat slabs, rectangular
vaults and round manholes. Attendees
will learn how interrupting load paths
affect structural performance of precast
components. Color-coded finite element
models will show how openings
concentrate stress in mono bases,
risers and slabs of rectangular and round
pieces. A rule of thumb will be presented
to correct for the effect of holes and
identify when holes could create trouble.
All examples will be presented in
concept without numerical detail.
will be able to:
• Define load paths and how
interrupting load paths affects the
structural performance of precast
components
• Identify holes that have the potential to
cause a problem with precast pieces
Note: If you attended the NPCA Advanced
Repair Techniques webinar in 2015, you
may be interested in this course.
LEADERSHIP
Strong leaders never stop pursuing greatness, and that includes continued learning. NPCA’s Leadership Track is designed for leaders
like you who want to continue to grow and develop. Courses are intended for those who have held senior leadership positions or who
aspire to hold these positions in the future and are taught by leadership experts both from within and outside of the precast industry.
L1 – SUCCESSION PLANNING
STRATEGIES AND WHY THEY
MATTER IN YOUR BUSINESS
L2 – PRECAST INTERNS:
HIRING TOMORROW’S BEST
TODAY
L3 – HOW TO FIND, TRAIN,
MOTIVATE AND RETAIN
EMPLOYEES
Friday, March 4
Friday, March 4
Saturday, March 5
8:30 a.m. – 11:30 a.m.
10:30 a.m. – Noon
7:30 a.m. – 9:30 a.m.
Location: Lincoln A
Location: Jackson E
Location: Ryman
Kevin L. Ramsier,
Vesticor Advisors LLC
Internships have traditionally been
a great way to attract high-quality
Ballroom D
Monroe Porter, PROOF
Management
What exactly is succession Kevin L. Ramsier
employees because they provide both
planning? It is a broad
employers and students a chance to
term that describes the steps to replace
determine fit before making any long-
This program addresses proven recruiting
one leader with another. Most people
term commitment. But as the economy
methods, leadership skills, productivity
associate this process with the CEO or
recovers and the workforce ages,
enhancements and motivational
leader of the business, when in fact a
internships are proving to be more
techniques. It is designed for anyone
well-designed succession plan accounts
valuable than that. This course will
who manages people, including business
for every important leadership position
highlight the Top 5 reasons your company
owners, production supervisors, office
within your business. In this way, a great
should invest in an internship program
managers, department heads and plant
succession plan becomes less about a
and present an internship model that you
managers. All the rules have changed
one-time event and more about fostering
can easily adopt regardless of the size
when it comes to finding and retaining
a culture of growth and advancement
of your company. If producers, suppliers
employees in today’s market. Leading
inside of the business. Learn how
and consultants all took advantage of
edge companies must adapt to survive.
succession planning can become a
internship opportunities, the future of the
You’ll learn the value of recruiting work
process of identifying, assessing and
precast/prestressed industry would be
ethic and teaching skills. Learn how to
continually developing talent in all key
better for attracting the best talent now.
quickly analyze performance issues and
areas of your business.
Consultants
Monroe Porter
what course of action to take. Coaching
This course is a collaboration between
and developing employees may be easier
the educational foundations of NPCA
than you think.
will be able to:
and PCI.
• Build a strong foundation of profit and
growth
• Identify core competencies and
critical positions within your business
• Develop a succession management
strategy
• Implement a succession plan and
evaluate its effectiveness
Note: If you attended the Principles in
Leadership course at The Precast Show
2015, you may be interested in this
course.
will be able to:
will be able to:
• Identify and qualify performance
• Recognize the importance of
an internship program for your
organization and the precast/
prestressed concrete industry
• Use resources and contacts to
establish an internship program in
your company
• Implement a successful internship
model
issues with the use of a simple matrix
• Recognize that productivity has little
to do with hard work
• Avoid conflict and focus on
performance conversations
L4 – FORUM ON
ESTABLISHING A CULTURE
OF SUSTAINABILITY
AND EFFICIENCY IN
MANUFACTURING
SPONSORED EDUCATION
Saturday, March 5
9:45 a.m. – 11:00 a.m.
NPCA Associate and Producer Members
will be on hand to discuss practices they
have implemented at their production
facilities that have led to increased
sustainability as well as savings in
material and time. Learn how these
companies have achieved employee
engagement to create a leaner culture.
In the precast concrete industry, both
producers and suppliers are sometimes
challenged on how to implement
efficient and lean practices at their
facilities. Top down approaches may not
always work. This forum is for company
owners, senior managers, production
managers, office managers or anyone
involved in production.
will be able to:
• Describe three key strategies for
engaging employees in efficient
manufacturing
• Explain three modifications to current
processes at the plant that could lead
to enhanced efficiency
TITAN – TITAN II POWER USERS
on ideas for new Titan features. This
Wednesday, March 2
course will stress concepts and tools
3:00 p.m. – 5:30 p.m.
that can be immediately implemented to
Location: Ryman Studio QR
improve your company’s effectiveness,
competitive advantage and bottom line.
$125 Member Full
Package
$185Member À La
James Muka
Carte
$145 Nonmember Full Package
$225Nonmember À La Carte
James Muka, Muka Development
Group LLC
This new Titan Power User course will
cover all the new Titan features rolled
At the conclusion of this course,
participants will understand the
benefits of Titan’s:
• New Visual Loader module
• New Production Dashboard screen
• New PO Requisition Approval features
• Task Management enhancements
including new Task Triggers feature
and Outlook integration
out within the last year. Created for
• Timesheet Module features
all users, this session is intended to
• Single Shipment feature to streamline
increase the productivity of all staff
members who use Titan. Whether
you are a sales representative, project
coordinator, engineer, dispatcher,
production scheduler, plant manager,
accounting clerk, cost accountant or
jobs requiring only one shipment
• Pipe Anticipation Dates and Load
Creation features
• New Enhanced Drawings features and
capabilities
the CFO, this course has something
• New Takeoff Auto-build features
for everyone in your organization. We
• Additional Management reports
will cover the new productivity features
• Special Buy Item Ordering and
from Titan’s 16 Precast Management
modules, including a complete review
of the new Visual Loader module and
Production Dashboard screen. Time will
also be set aside for a group discussion
Tracking features
• New Assembly/Visual Estimator
Integration features
• Job Costing and Estimating features
• Cite three examples of lean
manufacturing discussed during
this session that have enhanced the
company’s sustainability
Education Program Policy
Educational sessions are noncommercial forums. Speakers are expected to refrain
from using brand names and endorsing specific products. Educational sessions are
not to be used for direct promotion of a speaker’s product, service or monetary selfinterest. Speakers at all sessions must refrain from overt statements, harsh language
or pointed humor that harms the rightful dignity and social equity of any individual or
group. Please note any violation of this policy on session evaluation forms or let any
NPCA staff member know.
NPCA
PROGRAM
The National Precast Concrete Association
1320 City Center Dr., Suite 200
Carmel, IN 46032
precast.org
NPCA: RESOURCES FOR AN EVOLVING
INDUSTRY
A
s the construction industry continues to evolve, contractors and project owners are seeking partners that can meet their
growing demands for quality products delivered on tight schedules at competitive prices. Whether it is a major transportation
project, a municipal infrastructure restoration or a septic tank delivered to a backyard, quality, reliability and accountability
are more important than ever. As the precast concrete industry continues to develop new processes that save time, save labor and
reduce waste, precasters are well positioned to provide the best solutions for the constantly changing construction industry.
Navigating this landscape is more challenging than ever. The good news is, you’ve got a partner in NPCA. From technical information
to marketing tools, safety services and top-notch training, we’re working every day to provide you with wide-ranging resources that
help you meet everyday challenges in a highly competitive industry.
NPCA members benefit from a vast range of products and services and unique opportunities. We provide precast-specific education,
networking opportunities, a nationally recognized certification program, award-winning publications and tools for the modern precast
concrete business. Services are broken down into five main areas: Technical, Educational, Marketing, Meetings and Membership.
Stop at the NPCA exhibit booth on the trade show floor to learn more!
TECHNICAL SERVICES
MARKETING SERVICES
NPCA members with technical questions or issues can rely on
the NPCA Technical Services team for up-to-date support on the
best practices in quality precast concrete production.
NPCA continuously develops new tools to educate and engage
engineers, architects and regulators about the many benefits
of specifying precast concrete. The NPCA marketing initiative
generated more than 6 million impressions in 2015 and led to
more than 25,000 clicks to precast.org. The marketing outreach
effort will continue through 2016 with a focus on reaching the
specifying community with messages about the benefits of
precast concrete.
Resources:
• NPCA’s ANSI-accredited Plant Certification program
• NPCA Quality Control Manual for Precast Concrete Plants
• NPCA Guide to Plant Safety
• Back to Basics safety video
• LEED Calculator
• NPCA Annual Book of Selected ASTM Standards
• Technical publications
• Product committees
EDUCATIONAL SERVICES
In an industry where margins are tight and competition is tough,
a well-trained workforce can mean the difference between the
success or failure of a business. That’s why NPCA counts technical education as one of its most important services. Available
to members and nonmembers, NPCA’s educational courses
keep precasters on the leading edge of new technology while
providing a firm foundation of quality production techniques.
Resources:
• Production & Quality Schools (PQS) through Precast
University
• The Master Precaster certification series
• Online education
• The NPCA webinar series
• Lunch and Learns
MEETINGS
Look for these meetings in the coming months:
• NPCA 51st Annual Convention, Sept. 28-Oct. 1, 2016,
Austin, Texas
• The Precast Show 2017, March 2-4, Cleveland
• The Precast Show 2018, Feb. 22-24, Denver
Resources:
• NPCA Industry Benchmarking Report
• Exclusive member content at precast.org
• Precast Inc. magazine
• Precast Solutions magazine
• Precast Express and other special interest e-newsletters
• Membership Directory & Buyer’s Guide
• Little Books of Concrete
• Governmental affairs
• NPCA Shop
MEMBERSHIP
The Member Services department is your first point of contact
at NPCA when you have questions or would like to speak with
any of the staff.
Resources:
• Find a Producer/Find an Associate search at precast.org
• Many networking opportunities
• Trade show, annual convention and other events
• Awards and recognition programs
• Educational courses and technical training
• Access to NPCA’s technical team
• Publications – both print and online
• Leadership development
NPCA SCHEDULE OF EVENTS
Note: Program subject to change. Visit ThePrecastShow.org or check The Precast Show App for the most up-to-date information.
TUESDAY, MARCH 1
7:00 a.m. – 6:00 p.m. PQS Level I (Day 1)
Ryman Studio PQ
7:00 a.m. – 8:30 a.m. PQS Level II - Production (Day 1)
Ryman Ballroom C
8:00 a.m. – 5:00 p.m. PQS Level III - Leadership (Day 1)
Ryman Ballroom A
2:00 p.m. – 5:00 p.m. NPCA Executive Committee Meeting
Magnolia Boardroom A (by invitation)
3:00 p.m. – 4:00 p.m. CANCELLED PCI/NPCA Foundations
Joint Meeting
4:30 p.m. - 6:00 p.m.
Sustainability Committee
Ryman Studio O
5:00 p.m. – 5:45 p.m. Boom Truck Task Force
Ryman Studio M
6:00 p.m. – 8:00 p.m. NPCA Board of Directors Dinner
Old Hickory Wine Room
(by invitation)
Water and Wastewater
Product Committee
Ryman Ballroom D
8:00 a.m. – 5:00 p.m. Stormwater Management
Product Committee
Registration Open
Ryman Hall C Foyer
8:00 a.m. – 5:00 p.m. 7:00 a.m. – 8:30 a.m. Tennessee D
8:30 a.m. – 9:30 a.m. NPCA Board of Directors Huddle
Ryman Studio E
9:00 a.m. – 5:00 p.m. PQS Level I (Day 2)
Ryman Ballroom D
9:00 a.m. – 5:00 p.m.
PQS Level II - Production (Day 2)
Ryman Ballroom C
9:00 a.m. – 5:00 p.m.
PQS Level III - Leadership (Day 2)
Ryman Ballroom A
9:30 a.m. - 11:00 a.m. MIC Task Force
Ryman Studio L
9:30 a.m. – 11:00 a.m.
Pinnacle Award Rehearsal
Ryman Studio R
9:30 a.m. - 11:00 a.m.
Wall Product Committee
Ryman Studio MN
11:30 a.m. – 1:00 p.m. NPCA-PCI Joint Board Luncheon
Magnolia Ballroom (by invitation)
WEDNESDAY, MARCH 2
1:30 p.m. – 3:00 p.m.
6:00 a.m. – 7:00 p.m. 1:30 p.m. – 3:00 p.m. Registration Open
Ryman Hall C Foyer
6:30 a.m. – 9:30 a.m. Continental Breakfast
Ryman Hallway
7:00 a.m. – 8:30 a.m. 7:00 a.m. – 8:30 a.m. 3:00 p.m. – 5:30 p.m. Sponsored Education:
Titan II Power Users
Ryman Studio QR
3:30 p.m. – 5:00 p.m. Quality Assurance Committee
Ryman Studio L
5:30 p.m. – 7:30 p.m. NPCA Foundation Board Meeting
Precast Concrete Paving Slabs
with Dinner (by invitation)
Product Committee
Tennessee B
Ryman Studio MN
7:00 a.m. – 8:30 a.m. Utility Structures Product Committee
Ryman Studio MN
Manhole Product Committee
Ryman Studio R
7:00 a.m. – 8:30 a.m. Ryman Studio L
Education Committee
Ryman Studio L
Technical Committee
Safety, Health and
Environmental Committee
Tennessee B
Buses will depart from Gaylord Opryland and return to Opryland for all off-site events.
THURSDAY, MARCH 3
6:00 a.m. – 7:00 p.m. Plant Tour Breakfast
Ryman Studio MNO
6:30 a.m. – 11:00 a.m. The Precast Show Plant Tour
See page 11 for departure times and
locations
9:00 a.m. – 11:15 a.m. Optional Tour – Fontanel Mansion
See badge itinerary for bus departure
Lincoln C
8:00 a.m. – 9:30 a.m. Industry Awards Luncheon and
Master Precaster Class of 2016
8:00 a.m. – 10:00 a.m. 8:00 a.m. – Noon 8:30 a.m. – 11:30 a.m. The Precast Show Grand Opening
Ryman Hall C
Jackson CD
8:30 a.m. – 11:30 a.m. Lincoln A
9:00 a.m. – 10:00 a.m. (all exhibitors welcome)
10:00 a.m. – 11:30 a.m. (PM4)
Jackson F
10:00 a.m. – Noon Crane Operator Certification Update
Lincoln D
10:00 a.m. – Noon FRIDAY, MARCH 4
Officers’ Breakfast
Delivery (FM2)
Lincoln C
Ryman Hall C Foyer
7:00 a.m. – 10:30 a.m. Education Continental Breakfast
Presidential Mezzanine
7:30 a.m. – 8:00 a.m. 8:00 a.m. – 9:30 a.m. Nominating Committee
Magnolia Boardroom A
10:30 a.m. – Noon Precast Interns: Hiring Tomorrow’s
Best Today (L2)
Magnolia Ballroom (by invitation)
Registration Open
How to Determine the True Cost
of Fleet Operations and Job Site
Women in Precast Reception
10:30 a.m. – 11:30 a.m. 7:00 a.m. – 6:00 p.m. Basic Mix Proportioning: What You
Need to Know (CP4)
(by invitation)
7:00 a.m. – 8:00 a.m. Raw Materials for Precast Products
Ryman Hall C, Near Precast Village
7:00 p.m. – 8:30 p.m.
Exhibitors’ Forum Breakfast
Ryman Hall B6
4:00 p.m. – 7:00 p.m.
3:00 p.m. – 4:00 p.m. Succession Planning Strategies and
Why They Matter in Your Business (L1)
Reception on trade show floor
(Includes appetizers and host bar)
Selling and Marketing Precast
Products and Services (FM1)
Ryman Hall C
2:00 p.m. – 7:00 p.m. PQS II - Safety: Precast Module (CP1)
Jackson AB
Ryman Hall B6
Precast Village Open
Precast 101 (CP2)
Jackson E
Graduation
2:00 p.m. – 7:00 p.m. Working With Your DOT (PM2)
Jackson F
time and location
11:30 a.m. – 1:30 p.m. Impact of Cement on Properties of
Concrete (CP3)
Registration Open
Ryman Hall C Foyer
6:00 a.m. – 9:00 a.m. 8:00 a.m. – 9:30 a.m. Jackson E
Noon – 6:00 p.m. Precast Village Open
Ryman Hall C
Noon – 6:00 p.m. The Precast Show
Ryman Hall C
OSHA Crane Certification Update
(PM1)
Noon – 1:30 p.m.
Jackson CD
Dissecting the ASTM Precast
7:00 p.m. – 9:00 p.m. Master Precaster Alumni Bash 2016
Concrete Rubber Gasket Standards
Off Property (by invitation)
(PM3)
Buses load at 6:30 p.m. at the
Lincoln D
Opryland Hotel. Refer to The Precast
Show App for exact location.
Schedule continues on page 34.
Buses will depart from Gaylord Opryland and return to Opryland for all off-site events.
SATURDAY, MARCH 5
7:00 a.m. – 5:00 p.m. 9:45 a.m. – 11:00 a.m. of Sustainability and Efficiency in
Registration Open
Manufacturing (L4)
Ryman Hall C Foyer
7:00 a.m. – 10:30 a.m. Education Continental Breakfast
Ryman Studio Foyer
7:30 a.m. – 9:00 a.m.
7:30 a.m. – 9:00 a.m. 7:30 a.m. – 9:30 a.m. Ryman Ballroom A
9:45 a.m. – 11:00 a.m. 9:45 a.m. – 11:00 a.m. Precast Products (PM8)
(CP5)
Ryman Studio M
11:00 a.m. – 3:00 p.m. How to Find, Train, Motivate and
Ryman Hall C
11:00 a.m. – 3:00 p.m. The Precast Show
Ryman Hall C
Me! (CP6)
Noon – 1:30 p.m.
Ryman Studio M
The Next 2 Years: Your Cash Flow
3:15 p.m. – 4:15 p.m. Executive Leadership Academy
Growth and Opportunities (FM3)
Focus Group
Ryman Ballroom C
Ryman Studio B (by invitation)
Understanding Hydration and Curing
3:15 p.m. – 4:30 p.m. Emerging Leaders Focus Group
Davidson A (by invitation)
3:30 p.m. – 4:30 p.m. Mix Design Workshop (PM6)
Ryman Studio FG
9:30 a.m. – 10:30 a.m.
Precast Village Open
Math for Precasters: It’s All Greek to
Ryman Ballroom A
8:00 a.m. – 11:00 a.m. The Structural Effect of Holes in
Lifting Devices for Precast Products
of Precast Concrete (PM5)
8:00 a.m. – 11:00 a.m. OSHA’s Top 10 Citations and How to
Ryman Ballroom C
Ryman Ballroom D
7:30 a.m. – 9:30 a.m. Would a Septic Tank Look Like? (CP8)
Prevent Them (CP9)
Retain Employees (L3)
7:30 a.m. – 9:30 a.m. If We Didn’t Have Regulations, What
with Breakfast
Ryman Ballroom BE
7:30 a.m. – 9:30 a.m. 9:45 a.m. – 11:00 a.m. Joint Marketing Task Force Meeting
7:30 a.m. – 9:00 a.m. Ryman Ballroom D
How to Teach Lunch and Learns (FM4)
Ryman Studio L
Forum on Establishing a Culture
NPCA Yoakum Award Committee
6:30 p.m. – 10:00 p.m. Honky-Tonk Hoedown at the
Troubleshooting Precast Production:
Wildhorse Saloon Networking Event
Problems and Solutions (CP7)
See badge itinerary for bus departure
Ryman Ballroom F
time and location
NPCA Marketing Task Force
9:30 a.m. – 11:00 a.m. Advice for Those Fighting Alternative
Materials in Their Markets (FM5)
Ryman Studio L
9:30 a.m. – 11:00 a.m. Optimized Combined Aggregate
Grading for Precast Construction
(PM7)
Ryman Ballroom BE
SUNDAY, MARCH 6
8:00 a.m. – Noon NPCA Board of Directors Meeting
with Breakfast
Ryman Ballroom A
SPECIAL EVENTS
THE INDUSTRY AWARDS
LUNCHEON AND MASTER
PRECASTER CLASS OF 2016
GRADUATION
THE CREATIVE USE OF PRECAST
THURSDAY, MARCH 3
concrete in both underground and above-
11:30 a.m. – 1:30 p.m.
presented to the top entries as judged by
Gaylord Opryland
our independent team of experts.
AWARDS
Sponsored by Tricon Precast
The Creative Use of Precast Awards
highlights innovative uses of precast
ground applications. Awards will be
Ryman Hall B6
THE SUSTAINABILITY
Kick off the opening day of The Precast Show with NPCA’s
AWARDS
Industry Awards Luncheon. Leading into the opening of the
Sponsored by Concrete Sealants
trade show, the program features four of NPCA’s highest profile
events:
PINNACLE PRESENTATIONS AND
AWARD
Sponsored by Spillman Co.
The annual competition where
This award highlights both
sustainable projects and in-plant
sustainability efforts to reduce,
reuse and recycle. Awards will be
presented in two categories – NPCA
Producer Members and NPCA
Associate Members.
representatives from NPCA member
plants present time and labor-saving
inventions, new strategies and other
innovations that improve plant operations,
save money or increase efficiency. Every
producer plant in attendance receives one
vote, with the Pinnacle Award presented at the end of the event
to the presentation that receives the most votes.
PLANT CERTIFICATION AWARDS AND
ANNIVERSARIES
The NPCA Quality Assurance Committee honors
the leaders in the Plant Certification Program
MASTER
PRECASTER
ALUMNI BASH
2016
FRIDAY, MARCH 4
7:00 p.m. – 9:00 p.m.
NPCA Certified
Master Precaster
Acme Feed & Seed
(by invitation)
Sponsored by W.P. Hilts & Co.
with its quality awards and anniversary honors.
Buses load at 6:30 p.m. at the Opryland Hotel. Refer to The
The Top 25 plants will be recognized, and this
Precast Show App for exact location.
year the list includes a record 16 plants that will
The Master Precaster Class of 2016 will be the guests of honor
receive the Quality Award of Excellence for recording perfect
at the 3rd Annual Master Precaster Bash. Open to all Master
scores on their certification audits. Also honored will be plants
Precaster graduates, the event will be held at one of the newest,
celebrating milestone anniversaries in the certification program.
hippest clubs in downtown Nashville. Acme Feed & Seed is
Special honorees include the 25-year and 20-year anniversary
located in an historic warehouse in the heart of downtown amid
plants.
the cluster of live music bars, restaurants, boot shops and tourist
attractions. Hotel shuttles will run between the Gaylord Opryland
MASTER PRECASTER CLASS OF 2016 GRADUATION
We will present the Master Precaster Class of 2016 and award
and downtown Nashville following the event and throughout the
evening for those who want to explore the area.
each new graduate the coveted gold hard hat. Congratulations
to the industry’s newest Master Precasters!
PCI
PROGRAM
200 West Adams Street I Suite 2100 I Chicago, IL 60606-5230
Phone: 312-786-0300 I Fax: 312-621-1114 I www.pci.org
PCI brings The Precast Show exhibit
floor an area dedicated to showcasing
some outstanding student research. The
student poster presentation
area is a collaboration between the PCI
Student Education Committee and the PCI
Foundations.
Through the
PCI Student Education Committee
program, student researchers compete for a travel stipend
to attend the PCI Convention and present their research with
the industry. Representatives from the
PCI Foundation
Studios will join these travel award winners to offer a
unique variety of precast/prestressed concrete research topics
for discussion right on the exhibit floor!
Discuss technical research topics with some of
the brightest young minds in the country.
Poster Presentations
Precast Village
Friday, March 4
1:00 p.m. – 5:00 p.m.
CPCI
PROGRAM
PO Box 24058 Hazeldean
Ottawa Ontario, Canada K2M 2C3
Tel: (613) 232.2619
1.877.YES.CPCI (1.877.937.2724)
CPCI PROGRAM AT
A GLANCE
TUESDAY, MARCH 1
CPCI Marketing Committee Meeting
8:00 a.m. to Noon
Ryman Studio QR
CPCI Education Committee
Noon to 2:00 p.m.
Ryman Studio QR
CPCI Sustainability Committee Meeting
2:00 p.m. to 5:00 p.m.
Ryman Studio QR
WEDNESDAY, MARCH 2
CPCI Technical Committee Meeting
8:00 a.m. to Noon
Belmont A
THURSDAY, MARCH 3
CPCI Board of Directors Meeting
8:00 a.m. to Noon
Ryman Studio L
BOOTH 800
CSI
PROGRAM
813 Chestnut Street
www.caststone.org
P.O. Box 68
[email protected]
Lebanon, PA 17042
Fax: (717) 272-5147
(717) 272-3744
EXHIBITOR DIRECTORY
BOOTH 404
EXHIBITOR DIRECTORY
BOOTH 774
EXHIBITOR DIRECTORY
A
Accella Performance Materials . . 347
Advanced Formliners LLC . . . . 1066
2500 Adie Road
501 Eagle Court
A.C.E. Structures . . . . . . . . . .982
Maryland Heights, Missouri 63043
Onalaska, WI 54650
155 Raynor Ave.
(423) 697-0429
(608) 397-4450
Ronkonkoma, NY 11779
(423) 697-0482 fax
www.advancedformliners.com
(631) 648-8715
www.accellacorp.com
Shane Calmes
(631) 981-4430 fax
Dave Wachter
[email protected]
www.ace-structures.com
[email protected]
Manufacturer of formliners – both urethane
and plastic. Manufacturer of systems to
embed bricks into concrete. Distributor
of the major thin brick manufacturers.
Patented systems such as Solocast and
Flex2fit.
Adam Wagner
[email protected]
Retractable structures have many unique
features that give them a distinct edge over
traditional buildings. They can be retracted
as needed from various configurations
to accommodate custom and specific
requirements to maximize your ROI.
Customizable polyurethane formulations for
architectural precast molds, formliners and
concrete stamping applications.
ACR Systems Inc. . . . . . . . . . .382
201-15110-54 “A” Ave.
Surrey, BC V3S 5X7 Canada
(800) 663-7845
(604) 591-2252 fax
A.L. Patterson Inc. . . . . . . . . . 856
www.acrsystems.com
300 Ben Fairless Drive
Juliette Sicotte
Fairless Hills, PA 19030
[email protected]
(800) 332-7090
Accurately and easily profile temperature
within the structure of a pour with
ACR’s self-powered data loggers and
thermocouples. Proven performer in
determining concrete maturity.
(215) 736-2652 fax
www.patterson-online.com
Skip Francies
[email protected]
Lifting/Handling; Inserts/Connections;
Patching/Repair; Reinforcing Fibers; Plastic/
Metal Bar Supports; Chamfer; Magnetic
Solutions; Form Release; Curing Systems;
Architectural Finishes, Tools and more!
Adelphia Metals LLC . . . . . . . 1082
411 Main St. N.E.
New Prague, MN 56071
(952) 758-7500
(952) 758-7502 fax
ABC Polymer Industries LLC . . . .839
www.adelphiametals.com
545 Elm St.
Matt Miller
PO Box 580
[email protected]
Helena, AL 35080
Reinforcing bar for the rebar construction
industry offering straight length bar,
fabrication rebar, dowels, remesh and much
more. www.adelphiametals.com
(205) 620-9889
(205) 620-9882 fax
www.abcpolymerindustries.com
Denzil Schmitz
Located Just outside Birmingham,
Alabama, ABC Polymer is a fully integrated
manufacturer, whose primary product
include polypropylene fiber for concrete.
ABC is the exclusive dealer for the TB400
Fiber Dispenser.
Advanced Concrete Technologies Inc. . . . . . . . . . . . . . . . . . . .454
300 Portsmouth Ave.
Greenland, NH 03840
(603) 431-5661
www.concretebiz.com
Erik Johansen
[email protected]
Batching and mixing plants, HPGM
planetary counter-current high shear
mixers, DWM twin-shaft mixers, color
metering systems, plant automation,
concrete delivery systems and water
treatment systems.
AFTEC LLC . . . . . . . . . . . . . 172
4730 S. Riverside Drive
Suite C
Salt Lake City, UT 84123
(801) 281-2262
(801) 281-2272 fax
www.aftec.com
Dennis Kleinman
[email protected]
The Worldwide leader in designing and
manufacturing precast fence wall forming
systems, featuring the industry’s most
labor-efficient, versatile and profitable dualsided, decorative integrated panel/column
wall sections.
Agru America Inc. . . . . . . . . . .315
500 Garrison Road
Georgetown, SC 29440
(843) 546-0600
www.agruamerica.com
Ernie Heins
[email protected]
Agru America, Inc. is the world’s leading
manufacturer of flat die extrusion
geomembranes, geonets, geocomposites,
geotextiles, geo clay liners, concrete
protective liners and fittings.
AIRMATIC Inc. . . . . . . . . . . . 948
284 Three Tun Road
Malvern, PA 19355-3981
(800) 332-9770
(215) 331-9770 fax
www.airmatic.com
Bob Braun
[email protected]
Rebar Fastening Systems
EXHIBITOR DIRECTORY
A-Lok Products Inc. . . . . . . . . . . . . . . . . . . . . . 536
697 Main St.
Tullytown, PA 19007
(215) 547-3366
(215) 547-5260 fax
www.a-lok.com
Wally Swiger
[email protected]
Compression and boot style flexible, watertight rubber connectors
for all types and sizes of pipe to manhole penetrations. Duraplate
corrosion resistant PVC liner and epoxy mortar. Septic tank
connectors. Spacers and reinforcement accessories. Key-Lok
system lift inserts, lift insert holders, certified lift pins and lift
bars. Secondary and Primary invert channeling equipment. Avanti
Grout repair sealants. Kellys Concrete Dissolver.Grandslam Pipe
and connector lubricant. Butyl -Lok. Bolt slot anchors. Metal and
fiberglass hole formers and pour in place field sleeves.
American Geothermal Inc. . . . . . . . . . . . . . . . . . 669
1037 Old Salem Road
Murfreesboro, TN 37129
BOOTH 454
(615) 890-6985
(615) 890-6926 fax
www.amgeo.com
Robby Brown
[email protected]
Manufacturer of chillers, water heaters, heat pumps and air blast
systems for heating/cooling batchwater/greywater and aggregates.
Providing quality temperature control products for the concrete
industry worldwide for 35 years.
American Step Co. Inc. . . . . . . . . . . . . . . . . . . . 544
830 E. Broadway
Griffin, GA 30223
(770) 467-9844
(770) 467-8011 fax
www.americanstep.com
Craig Williams
[email protected]
Manhole Steps, Lifting Devices, Pulling Irons, Septic Tank Lifters,
Cylinder Molds, Wire Rope Lifters, Utility Anchors, Tooling Devices
Ameron Protective Linings . . . . . . . . . . . . . . . . 334
BOOTH 643
201 N. Berry St.
Brea, CA 92821
(714) 256-7755
www.amerontlock.com
Bob Fisher
Protective Linings
EXHIBITOR DIRECTORY
Architectural Concrete Casting Inc. . Associated Spring RAYMOND . . . 459
B.T. innovation GmbH . . . . . . .340
370 W. Dussel Drive
Sudenburger Wuhne 60
483 Dick Buchanan St.
Suite A
Magdeburg, Saxony-Anhalt, D-39116
La Vergne, TN 37086
Maumee, OH 48105
Germany
(615) 793-3973
(419) 891-9292
49 391 735270
(615) 793-3978 fax
(419) 891-9192 fax
49 391 735252 fax
www.concrete-casting.com
www.asraymond.com
www.bt-innovation.de
Reza Sharif
[email protected]
Jonas Crackau
[email protected]
Coiled Springs; Flat Springs; Gas Springs;
Counter-Balance Struts; Electromechanical
Struts
[email protected]
. . . . . . . . . . . . . . . . . 1217
ACC Inc. has been manufacturing top
quality cast stone/architectural precast
since 1995. Generally, our products are
listed in the specification as #4722 Cast
Stone.
Architectural Polymers . . . . . . .833
1220 Little Gap Road
Palmerton, PA 18071
(610) 824-3322
(610) 824-3777 fax
www.apformliner.com
Tara Wentz
[email protected]
From the Versa-Brix brick inlay system
and concrete form liners, to customized
concrete art and photo-engraving,
Architectural Polymers offers a wide-range
of solutions for your concrete constructing
needs.
Armcon Molds USA LLC . . . . . .266
127 Maple Lane
Lebanon, PA 17042
(717) 926-3774
(717) 272-4749 ttoll free
(717) 272-4609 fax
www.armconmoldsusa.com
Henry Santer
[email protected]
Wet Precast Concrete Equipment; Fencing
Molds; Landscape Molds; Dosers; Vibrating
Tables; Release Agents
Automacad Inc. . . . . . . . . . . .558
240 Liberté Ave.
Candiac, QC J5R 6X1 Canada
(450) 632-6323
(450) 632-6335 fax
www.automacad.com
Sandra Kapfer
[email protected]
Wet Cast Production Equipment; Precast
and Dry Cast Production Equipment; SplitImpact; Vibrating Tables; Demolding; Filling;
Conveyors, etc.
B
Precast Connection Systems; Precast
Magnet and Formwork Systems; Custom
Formworks; Standard and Custom
Magnetic Chamfers and Reveals; Rebar
& Mesh Spacers; Plastics; Concrete
Accessories; Sealings; Consulting
BASF Corporation . . . . . . . . . 436
23700 Chagrin Blvd.
Cleveland, OH 44122
(800) 628-9990
(216) 839-8830 fax
www.master-builders-solutions.basf.us
Nora Glauberman
[email protected]
Through its Master Builders Solutions
brand, BASF brings new and innovative
chemical admixture technology to the
precast/prestressed concrete market.
B.S. Italia . . . . . . . . . . . . . . 831
Via Stezzano 16
Zanica BG, 24050 Italy
011 39 035 671746
011 39 035 672265 fax
www.bs-italia.it/
Ivo Allas
[email protected]
Innovative steel lifting and connection
systems for the precast concrete industry.
BASYS Processing . . . . . . . . .224
15423 W. 100th Terrace
Lenexa, KS 66219
(913) 214-5027
(913) 307-2727 fax
www.basyspro.com
Aaron Cott
[email protected]
Whole sale credit card processor providing
merchant services solutions for the Precast
and Concrete Industry.
EXHIBITOR DIRECTORY
Bekaert Corp. . . . . . . . . . . . . . . . . . . . . . . . . 270
1395 S. Marietta Parkway
Building 500, Suite 100
Marietta, GA 30067
(770) 514-2206
www.bekaert.com
T.R. Kunesh
[email protected]
Strand; Wire Reinforcement; Welded Wire Reinforcement;
Reinforcement; Fiber Reinforcement – Steel; Fiber Reinforcement –
Synthetic; Fiber Reinforcement - Blended
Bentley Systems . . . . . . . . . . . . . . . . . . . . . . 431
685 Stockton Drive
Exton, PA 19341
(610) 458-2810
(610) 675-2878 fax
www.bentley.com
Barbara Day
[email protected]
Bentley is the global leader dedicated to providing architects,
engineers, constructors and owner-operators with comprehensive
software solutions for sustaining infrastructure.
Besser Company . . . . . . . . . . . . . . . . . . . . . . 306
1519 12th St.
Boone, IA 50036
(989) 354-1000
www.besser.com
Denny Anderson
[email protected]
Complete systems for the production of pipe and precast products
including curing systems.
Betonvereniging (Dutch Concrete Society) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Precast Village
PO Box 411
Gouda, 2800 AK Netherlands
0031 182 539233
0031 182 537510 fax
www.betonvereniging.nl
[email protected]
Presentation International fib symposium 2017, 12-16th June in
Maastricht, The Netherlands. The theme of the fib symposium 2017:
High tech concrete: Where technology and engineering meet!
BOOTH 536
EXHIBITOR DIRECTORY
BOOTH 284
EXHIBITOR DIRECTORY
BFS Betonfertigteilesysteme GmbH . . . . . . . . . . . . . . . . . . .309
Bianchi Casseforme S.r.l. . . . . . 1042
Via G. Di Vittorio, n. 42
Dr. Georg-Spohn-Strasse 31
Fornovo di Taro, 43045 Italy
Blaubeuren, Baden-Wurttenberg
39 0525 400 511
D-89143 Germany
39 0525 400 512 fax
49 7344 96030
www.bianchicasseforme.it
49 7344 4710 fax
Sara Buratti
www.bfs-casagrande.de
[email protected]
Daniel Buehler
Moulds for Precast Elements; Concrete
Distributing Machines; Washing Plant for
Panels; Pneumatic and Electric Vibrators
[email protected]
BFS produces machinery for the production
of concrete pipes, manholes, monolithic
manhole bases, electric and lightening
poles as well as high pressure pipes.
BIK Hydraulics Ltd. . . . . . . . . 1014
41 Claireville Drive
Toronto, ON M9W 5Z7 Canada
BFT International - Concrete Plant &
(416) 679-3838
Precast Technology . . . . . . . . .
(888) 557-2244 ttoll free
. . . . . . . . . . . Precast Village
(416) 679-8250 fax
Avenwedder Strasse 55
www.bikboomtrucks.com
Gutersloh, Nordrhein-Westfalen 33311
Dena Ivan
Germany
[email protected]
49 5241 8090884
Boom Trucks; Precast Trucks
49 5241 80690880 fax
www.bft-international.com
Bi-State Rubber . . . . . . . . . . 365
Jens Maurus
1611 Headland Drive
[email protected]
Fenton, MO 63026
BFT – Concrete Plant & Precast Technology
(636) 349-2388
BHS-Sonthofen Inc. . . . . . . . . 371
14300 S. Lakes Drive
Charlotte, NC 28273
(704) 814-7671
(704) 845-1902 fax
www.bhs-sonthofen.com
Stuart Bentley
[email protected]
(636) 349-2393 fax
www.bistaterubber.com
Kevin Moore
[email protected]
Flexowell Pocket Belts; Cleated and
Flanged Belts; Flat Belting; Belting
Components; Specialty Rubber or Urethane
Items; Van Gorp Pulleys; Argonics Belt
Scrapers; Material Handling Hoses
BOOTH 679
DKX 1.67 (2.2 YD3) Twin-Shaft Batch Mixer
EXHIBITOR DIRECTORY
Blackthorn LLC . . . . . . . . . . .354
BREN Inc. . . . . . . . . . . . . . .226
CAM Sales Inc. . . . . . . . . . . .305
6113 Brookville Salem Road
8256 Horton Highway
PO Box 603
Clayton, OH 45315
College Grove, TN 37046
Ludington, MI 49431
(937) 836-9296
(800) 826-3991
(231) 845-0547
(937) 836-9395 fax
(615) 395-7015 fax
(231) 845-0098 fax
www.blackthorn-inc.com
www.BrenInc.com
www.camsales.com
Greg Benedict
Mark Turner
Jim Wright
[email protected]
[email protected]
[email protected]
Hole-Formers - ANY SIZE & SHAPE
(fiberglass, foam, plastic/urethane, steel,
etc); Pallet Supports; Magnetic Solutions,
including Step Pin Assembly; Rubber
Gaskets and Seals for Storm & Sanitary;
Concrete Accessories & Tools; Magnetic
& Bolt-On Lettering & Logo Plates (any
message) for Cast-In; Molds/Forms (new &
repair); Core Bits (New & Re-Seg); Plastic
Spacers (wheels, chairs, clips, etc.); Patch
Material; Tools; Material Handling; Vibrators;
Custom Fiberglass
Stencil Machines; Materials & Supplies
CAM Equipment Sales offers equipment for
fabricating/bending/cutting wire and rebar
reinforcement including block and specialty
mesh, dowel baskets, slab bolsters, spirals
and straight/cut from coils.
Buzzi Unicem USA . . . . . . . . .220
100 Brodhead Road
Bethlehem, PA 18017
(610) 882-5000
(610) 882-0421 fax
www.buzziunicemusa.com
William Krupa
[email protected]
Portland Cements Type I, I/II, III and
Calcium Sulphoaluminate Cement
Boucherville, QC J4B 7L6 Canada
(450) 449-4770
(450) 449-4898 fax
www.bmhsystems.com
Marie-Helene Cazelais
[email protected]
C
C.G.M. Srl . . . . . . . . . . . . . .481
Viale De’Brozzi 87/2
Lugo (Ravenna), 48022 Italy
39 345 8038690
Turnkey custom concrete precast and batch
plants, with twin-shaft or planetary mixers,
automatic monitoring, seismic provisions
depending on zone, small footprint
configurations and all seasons capabilities.
39 0545 32297 fax
BN Products - USA . . . . . . . . 1201
C.V. International Plastics Inc. . . . 370
3450 Sabin Brown Road
Wickenburg, AZ 85390
(928) 684-2813
(928) 684-7041 fax
www.bnproducts.com
Lon Brown
[email protected]
Construction equipment which includes
rebar cutters, benders, tiers, saws and
mixers.
813 Chestnut St.
PO Box 68
Lebanon, PA 17042
(717) 272-3744
(717) 272-5147 fax
www.caststone.org
BMH Systems . . . . . . . . . . . 869
71 Chemin du Temblay
Cast Stone Institute . . . . . . . 1224
www.cgm-srl.com
Luca Serafini
[email protected]
Machine and molds for concrete products.
532 90th Ave.
Montreal, QC H8R 2Z7 Canada
(877) 679-0688
(450) 698-0335 fax
www.cvplastic.com
Angelo Verelli
[email protected]
Since 1991 manufacturing plastic rebar
spacers, slab bolsters, spacer wheels,
panel pads, corner guards, clips, rebar
chairs, safety caps, and more!
Jan Boyer
[email protected]
The Cast Stone Institute®, founded in 1927,
is an organization of certified Cast Stone
Manufacturers and related professionals
committed to developing standards and
promoting the use of cast stone. We
continually strive to encourage, through
research, development and member
training, the continual improvement of cast
stone’s unique characteristics and educate
designers and users of cast stone on the
inherent value, quality and best practices in
the use of cast stone.
Cat Lift Trucks . . . . . . . . . . . .144
2121 W. Sam Houston Parkway N.
Houston, TX 77043
(800) CAT-Lift
www.cat-lift.com
Kimberly Scott
[email protected]
The Cat® DP70N and DP100N-DP160N
pneumatic tire lift truck series provides
optimum power and reliability to tackle the
toughest material handling applications.
EXHIBITOR DIRECTORY
CCL Spiroll . . . . . . . . . . . . . 661
Chemline Inc. . . . . . . . . . . . .568
8296 Sherwick Court
5151 Natural Bridge Ave.
Jessup, MD 20794
Saint Louis, MO 63115
(301) 490-8427
(314) 664-2230
(301) 490-8497 fax
(314) 664-1355 fax
www.cclint.com
www.chemline.net
Marc Khoury
Neil Moon
[email protected]
[email protected]
Manufacturing, sale and service of CCL
pre-tensioning equipment and hardware,
Spiroll and Dynacore hollowcore extruders
and plant.
Chemline is an industry leading formulator
and manufacturer of 100% solids, cast and
fast-set spray polyurethane elastomers and
foams for concrete applications.
CCS/SureBuilt Manufacturing . . 1081
CHRYSO Inc. . . . . . . . . . . . . 681
1567 Frontenac Road
1611 State Highway 276
Naperville, IL 60563
Rockwall, TX 75032
(630) 615-2170
(972) 772-6010
(630) 615-2183 fax
(469) 402-2400 fax
www.surebuilt-usa.com
www.chrysoinc.com
Rens Hansort
Steve Williams
[email protected]
[email protected]
Lifting Products; Sandwich Panel
Connectors; Edge Connectors; Architectural
Formliners; Structural Connectors
For over 60 years Chryso has developed,
manufactured and serviced innovative
concrete admixture solutions based on the
needs of leading precast producers around
the world.
Cemen Tech Inc. . . . . . . . . . . 1167
1700 N. 14th St.
Indianola, IA 50125
(800) 247-2464
(515) 961-7409 fax
www.cementech.com
ClearSpan Fabric Structures . . . .754
1395 John Fitch Blvd.
South Windsor, CT 06074
(800) 760-0046
Mark Rinehart
www.clearspan.com
The world’s largest manufacturer of
volumetric proportioning and continuous
mixing systems.
[email protected]
Joe Teixeira
Provides design-build solutions for material,
equipment and other storage needs.
Chameleon Innovations . . . . . . 760
115 Hymus Blvd.
Pointe-Claire, QC H9R 1E5 Canada
Clearstream Wastewater Systems Inc.
. . . . . . . . . . . . . . . . . .378
(514) 695-3382
PO Box 7568
(514) 695-3382 fax
Beaumont, TX 77726
www.chameleon.ca
(409) 755-1500
Pegah Falinous
(409) 755-6500 fax
[email protected]
www.clearstreamsystems.com
Retractable enclosures custom-engineered
for lean manufacturing. The all-in-one,
indoor/outdoor curing & work shelter
solution! Retracts quickly to 20% their
extended length for 360° access to forms
and/or curing area.
Lonnie Welch
[email protected]
Manufacturer of concrete aerobic treatment
systems for residential, commercial and
marine applications.
BOOTH 442
EXHIBITOR DIRECTORY
Cleco Manufacturing . . . . . . . .712
Columbia Machine Inc. . . . . . . 1083
CONAC, Concrete Accessories . . . 800
14 Park Ave.
107 Grand Blvd.
4475 River Green Parkway
Hudson, NH 03051
Vancouver, WA 98661
Suite 100
(603) 886-5472
(360) 694-1501
Duluth, GA 30096
(603) 880-3095 fax
(360) 690-4578 fax
(800) 336-2598
www.clecoforms.com
www.columbiamachine.com
(770) 417-1820 fax
Dave Couturier
Tim Goode
www.conacweb.com
[email protected]
[email protected]
Michael Azarin
Standard & Custom Molds; Adjusting Box
Culvert Systems; Wet-cast and Dry-cast
Molds; Mixers; Turnkey Plant Systems;
Dry-cast Manhole Machines; Complete
Batching Systems; Material Handling.
Since 1937, Columbia Machine, Inc. has
been a worldwide leader in the design,
manufacturing and support of equipment
for a variety of industries, with customers
in over 100 countries. Columbia’s product
line includes mixing and batching, batching
controls, complete bagging lines, concrete
product machines and accessories for
the production of high quality concrete
products, including blocks, pavers, retaining
walls, precast, prestressed and more.
Columbia is your Total Solution.
[email protected]
CMC/MMI . . . . . . . . . . . . . .861
10320 S. Medallion Drive
Cincinnati, OH 45241
(513) 733-3000
(513) 956-3173 fax
www.cmcmmi.com
Concrete Accessories and Lifting Systems
Concrete Batch Solutions . . . . 1149
4700 Annapolis Road
Bladensburg, MD 20710
(800) 256-7221
www.concretebatch.com
Kurt Damery
[email protected]
Polarmatic Heating/Cooling/Curing System;
BHS Twin Shaft Mixers; Automation
Controls; Batch Plants
Monty Marsh
Combilift USA . . . . . . . . . . . 586
[email protected]
303 Concord St.
National fabricator and supplier of
stainless steel rebar. Custom fabricator of
continuous stirrups replacing conventional
stirrups or hoops.
Greensboro, NC 27406
Concrete Products . . Precast Village
(877) COMBI56
8751 E. Hampden Ave.
(336) 378-8842 fax
Suite B-1
www.combilift.com
Denver, CO 80231
CNA/CKC . . . . . . . . . . . . . .284
Gearoid Hogan
(414) 212-8266
[email protected]
www.concreteproducts.com
Straddle Carrier for the cost effective and
efficient handling of hollow core slabs,
precast elements or modular concrete.
Bill Green
4400 College Blvd.
Suite 150
Overland Park, KS 66211
(913) 378-1050
www.ckcins.com
Command Alkon . . . . . . . . . .647
Sam Bowlby
1800 International Park Drive
[email protected]
Suite 400
Property and Casualty, Bonding and
Benefits
Birmingham, AL 35243
(800) 624-1872
www.commandalkon.com
Wayne Faulkner
[email protected]
Precast/Prestress plant automation and
quality control computer software and
hardware products.
[email protected]
Concrete Products provides managementlevel readers in manufactured and ready
mixed concrete information on market,
legislative, regulatory and technology
developments affecting business volume
and plant operations.
BOOTH 842
EXHIBITOR DIRECTORY
Concrete Sealants Inc. . . . . . . . 418
Control Chief Corporation . . . . 1215
Cresset Chemical Company . . . .325
9325 State Route 201
200 Williams St.
13255 Main St., Box 367
Tipp City, OH 45371
Bradford, PA 16701
Weston, OH 43569
(800) 332-7325
(814) 362-6811
(419) 669-2041
www.conseal.com
(814) 368-4133 fax
(800) 367-2020 ttoll free
Chuck Overbay
www.controlchief.com
(419) 669-2200 fax
[email protected]
Karen Costello-Pecht
www.Cresset.com
ConSeal butyl rubber joint sealants and
external wraps for precast structures;
hydrophilic waterstops; water-based
coatings and lubricants; NSF Standard
61 listed products; hydrocarbon resistant
sealants and coatings; elastomeric caulks;
repair products; Antimicrobial Concrete
Additives and Surface Treatments;
hydrophilic repair products; solvent-free
waterproofing membrane.
[email protected]
Mike Baty
Control Chief’s industrial wireless remote
control solutions, provide the safest, most
cost effective results necessary for your
applications success. Great for industrial
over-head doors, cranes and gates.
[email protected]
ConcreteCareers.com . . . . . . . 566
Northern Ireland
3645 Market Place Blvd.
Suite 130-335
East Point, GA 30344
(877) 594-6946
(877) 594-6946 fax
www.concretecareers.com
Sid Stansell
[email protected]
Personnel Recruiting
Coote Engineering Ltd. . . . . . 1044
12 Lisdoart Road
Ballygawley, Tyrone, BT70 2NG
44 28 855 68123
44 28 855 68974 fax
www.coote.co.uk
Philip Coote
[email protected]
Precast Concrete Forms and Machinery for
the manufacture of Dry Cast and Wet Cast
products. Including: Cattle and Hog Slats,
Decorative Slabs, Veneer Stone, Lintels,
Precast Manholes, Cover Slabs, Parking
Bumpers and many more.
ConShield Technologies . . . . . .679
541 Tenth St. N.W. #233
Atlanta, GA 30318
CPI - Concrete Plant International . . . . . . . . . . . . . . . . . . . . .342
(877) 543-2094
3961 Floyd Road
(404) 420-2160 fax
Suite 300-252
www.conshield.com
Austell, GA 30106
Keith Walker
(770) 672-7082
[email protected]
(770) 783-3100 fax
ConShield protects your concrete sanitary
sewers from microbially induced corrosion
and offers economical and effective
waterproofing protection of new and
existing concrete structures through our
Crystal-X product line. 877-543-2094; www.
conshield.com
www.cpi-worldwide.com
Judi Taylor
[email protected]
CPI features up-to-date worldwide news
and technical information for the concrete
products industry.
Release Agents; Hand Cleaners; Spatter
Protection; Rust Preventative; Form
Treatments; Cures & Seals; Sprayers
CrystalStream Technologies . . . .336
2090 Sugarloaf Parkway
Suite 245
Lawrenceville, GA 30045
(800) 748-6945
(770) 979-6954 fax
www.crystalstream.com
Jeffrey Benty
[email protected]
Developer and designer of stormwater
treatment technology for use in precast
concrete products. Looking for top quality
precast partners.
CSI/Universal Wall Systems . . . .782
c/o Concrete Systems Inc.
9 Commercial St.
Hudson, NH 03051
(603) 889-4163
(603) 889-0039 fax
www.csigroup.com
Chris Vick, P.E.
[email protected]
The Universal Wall System (Uwall) is the
next generation retaining wall system.
Standard 8’L x 4’H and 8’L x 2’H sections.
Single course and top course sections
manufactured up to 8’L x 7’H, and can be
sloped to follow project grading.
BOOTH 234
BOOTH 678
EXHIBITOR DIRECTORY
Custom Rock Formliner . . . . . . 764
2020 7th St. W.
Del Zotto Products of Florida Inc. . . .
Diagraph MSP an ITW Company . . . . . . . . . . . . . . . . . . . . . 740
. . . . . . . . . . . . . . . . . 1080
Saint Paul, MN 55116
4575 W. Highway 40
5307 Meadowland Parkway
(651) 699-1345
Ocala, FL 34482
Marion, IL 62959
(651) 699-1830 fax
(352) 351-3834
(800) 521-3047
www.customrock.com
(352) 351-8875 fax
(618) 997-1766 fax
Tracy Gillespie
www.delzottoproducts.com
www.diagraphmsp.com
[email protected]
Steven Rutkowski
Jeff Brown
Custom Rock Formliner is a leading
manufacturer of architectural formliners
for the precast, cast-in-place and tilt-up
industries, specializing in simulated stone
masonry, murals and graphics.
[email protected]
[email protected]
Your Precast Super Store for all your
forming and precast needs.
Marking and Stenciling Supplies: Industrial
Markers, Inks, Rollers and Electronic &
Manual Stenciling Machines
Delta Engineers, Architects & Land
Surveyors . . . . . . . . . . . . 774
Diamondback Spacers LLC . . . . 485
D
860 Hooper Road
18218 Ironton St. N.W.
Endwell, NY 13760
Elk River, MN 55330
D & L Supply Co. Inc. . . . . . . . .232
(607) 231-6613
(952) 807-5665
(607) 231-6650 fax
www.diamondbackspacers.com
www.deltaengineers.com
Jim Erdahl
Daryl D. Burns, P.E.
[email protected]
880 W. 150 N.
Lindon, UT 84042-1221
(801) 785-5015
(801) 785-0835 fax
www.dlsupplyco.com
Jesse Walker
[email protected]
Construction Cast Iron and Metal
Fabrication
[email protected]
Delta is an award winning specialty precast
engineering firm that works directly with
the precasters to provide high speed, cost
competitive, quality designs and drawings
for various types of precast projects. Delta
is licensed in 46 states and has 15 full time
engineers dedicated to precast projects.
Davis Wire Corporation . . . . . . 857
19411 80th St. S.
DeVita & Associates Inc. . . . . . .578
Kent, WA 98032
PO Box 1596
(800) 872-8920
Greenville, SC 29602
(253) 395-3729 fax
(864) 232-6642
www.daviswire.com
(864) 242-4878 fax
Alan White
www.devitainc.com
[email protected]
Derrick Hiott
With locations in Kent, WA and Irwindale,
CA, Davis Wire is the leading producer of
welded wire reinforcement on the west
coast. Products include pipe fabric, welded
wire reinforcement in rolls and sheets for
precast applications, Bright A-1064 wire,
pencil rod and tie wire.
[email protected]
Dayton Superior Corporation . . .657
1125 Byers Road
Miamisburg, OH 45342
(888) 977-9600
www.daytonsuperior.com
Estella Matemu
[email protected]
Concrete Accessories and Chemicals
DEVITA is a full-service engineering firm
with an entire division dedicated to Precast
Engineering and Detailing. Our Team knows
how to work with yours to keep your
project on time and on budget. Our project
schedule is designed around your plan to
ensure production runs smoothly.
Plastic spacers used in box culvert
production.
Doosan Industrial Vehicle America
Corp. . . . . . . . . . . . . . . 1155
2475 Mill Creek Parkway
Suite 400
Buford, GA 30518
(870) 425-9289
(870) 425-9252 fax
www.doosanlift.com
Lyndle McCurley
[email protected]
Doosan Industrial Vehicle is a manufacturer
of quality material handling equipment for
the world market. Doosan Industrial Vehicle
America Corp. boasts a network of over
80 independent dealers in North America
alone and supplies forklifts ranging from
2,500 lbs. to 55,000 lbs. capacities to its
customers.
EXHIBITOR DIRECTORY
BOOTH 665
Duchesne et Fils Ltee . . . . . .
1183
Durajoint Concrete Accessories . . . .
871 Boul. Duchesne
. . . . . . . . . . . . . . . . . 1181
Eaco Chem . . . . . . . . . . . . 1204
765 Commerce Ave.
Yamachiche, QC G0X 3L0 Canada
10421 Industrial Drive
New Castle, PA 16101
(819) 296-3737
Garrettsville, OH 44231
(724) 656-1055
(800) 567-9464 fax
(888) 833-8308
(724) 656-0757 fax
www.duchesneus.com
www.durajoint.com
www.eacochem.com
David Campagna
Denise Harpster
Debbie Spik
[email protected]
[email protected]
[email protected]
North American manufacturer of concrete
reinforcement mesh and fasteners. Wire
Mesh (sheets & rolls); Pipe Mesh (common
or special sizes); Rebar; Tie Wires
Waterstop and Rebar Supports & Spacers
E
Eaco Chem manufactures products for use
in the new construction and restoration
industries which include substrates such as
tilt-up, precast and cast stone.
Duff-Norton . . . . . . . . . . . . .216
E & A Supply Corp. . . . . . . . . .345
Eagle Manufacturing Group/U.S.F.
9415 Pioneer Ave.
22 Southern Blvd.
Charlotte, NC 28273
Nesconset, NY 11767
Fabrication Inc. & U.S. Foundry &
Mfg. Corp. . . . . . . . . . . . . 610
(704) 588-4610
(888) 222-7501
3200 W. 84th St.
(704) 588-9884 fax
(631) 366-3573 fax
Hialeah, FL 33018
www.duffnorton.com
www.eandasupply.com
(305) 364-8200
Tim Haren
Diane Smid
(305) 882-1577 fax
[email protected]
[email protected]
www.usffab.com
E & A Supply offers Bayferrox iron oxide
pigments by the LANXESS Corporation.
LANXESS is the largest manufacturer of
iron oxide pigments in the world.
Jeff Allen
Manufacturer of Mechanical and Linear
actuators. Can be used to Pre-stress
Concrete and for general lifting and motion
control. Also, a manufacturer of Rotary
Unions.
[email protected]
Manufacturer of Aluminum; Steel; Stainless
Steel; Floor Access Doors; Ladders; Grates;
Hoists; Fall Through Prevention Systems.
EXHIBITOR DIRECTORY
Earth Wall Products . . . . . . . . 770
Egan Company . . . . . . . . . . 1008
Elematic Inc. . . . . . . . . . . . . 842
1427 Walcutt’s Way N.W.
7625 Boone Ave. N.
19745 Sommers Drive
Marietta, GA 30064
Brooklyn Park, MN 55428
Brookfield, WI 53045
(770) 378-5012
(763) 544-4131
(262) 798-9777
(866) 558-3146 fax
(763) 595-4380 fax
(262) 798-9776 fax
www.earthwallproducts.com
www.eganco.com
www.elematic.com
Thomas Rainey
Eli Martin
J. Matt Cherba
[email protected]
[email protected]
[email protected]
Earth Wall Products provides proprietary
retaining wall systems and materials for
use in the construction of earth retaining
walls.
Egan Company’s KFBatch products offer
engineered control and data processing
systems for operation of concrete products
batch plants (precast, prestress, pipe, block
& pavers, and packaging).
Elematic is the world’s leading supplier
of precast concrete machinery and
equipment, production lines and complete
production plants at work in more than 100
countries.
5119 Catlett Road
EJ . . . . . . . . . . . . . . . . . .442
EMH Inc. . . . . . . . . . . . . . . 234
Midland, VA 22728
301 Spring St.
550 Crane Drive
(540) 439-8911
East Jordan, MI 49727
Valley City, OH 44280-9361
(540) 439-2541 fax
(800) 626-4653
(330) 220-8600
www.easiset.com
(231) 536-4458 fax
(330) 220-0204 fax
Arthur Miles
www.ejco.com
www.emhcranes.com
[email protected]
Tom Teske
Darryl L. Kozel
Providing pre-casters rapid, low risk product
diversification through branded, proprietary
products: J-J Hooks Median Barriers,
Easi-Set Precast Buildings, SlenderWall
Architectural Cladding Panels, Beach
Prisms, SoftSound Sound Absorptive and
Sierra Wall II Noise Walls
[email protected]
[email protected]
EJ is the leader in the design,
manufacture and distribution of access
solutions for water, sewer, drainage,
telecommunications and utility networks
worldwide.
Overhead and gantry cranes and
components for loads to 300 tons, spans to
150 feet. Hoists; End Trucks; and Controls.
Easi-Set Worldwide . . . . . . . . 822
ELE International . . . . . . . . . . 319
Eden Technology s.r.l. . . . . . . . 238
5600 Lindbergh Drive
via Stra’, 3
PO Box 389
Galliera Veneta, Padova, 35015 Italy
Loveland, CO 80539
39 049 796 8830
(800) 323-1242
39 049 796 8829 fax
(970) 663-9781 fax
www.edentechnology.it
www.ele.com
Mauro Lidron
Brian Lins
[email protected]
[email protected]
Mobile Gantry Cranes; Launching Gantry;
Gantry Cranes; Self-Propelled Tyre Trolleys;
Mobile Marine Hoist. Dedicated Design,
Production, Start-up, Training, Spare Parts
and Assistance Service.
World leader in Concrete Testing Equipment
for over 50 years.
Endicott Thin Brick & Tile LLC . . . . .
. . . . . . . . . . . . . . . . . .372
PO Box 645
Fairbury, NE 68352
(402) 729-3323
(402) 729-5804 fax
www.endicott.com
Dean Schmidt
[email protected]
Thin Brick Manufacturers for the Precast
Industry
BOOTH 430
EXHIBITOR DIRECTORY
Engineered Wire Products . . . . .673
Eriksson Technologies Inc. . . . . .978
Essve Tech Inc. . . . . . . . . . . . 556
1200 N. Warpole St.
PO Box 16396
13955 Highway 9
Upper Sandusky, OH 43351
Tampa, FL 33687
Suite C
(419) 294-3817
(813) 989-3317
Alpharetta, GA 30004
(419) 294-1019 fax
www.lrfd.com
(770) 740-0498
www.ewpinc.com
Roy L. Eriksson, P.E.
(770) 740-0369 fax
Jeff Babcock
[email protected]
www.essvetech.com
[email protected]
Eriksson Technologies & Software provides
consulting engineering services and
develops/markets engineering design
software. Engineering primarily rendered
to the precast/prestressed concrete
fabricators that serve both commercial
buildings and transportation market.
Jenny Bass
ERMC . . . . . . . . . . . . . . . .616
Cleveland, OH 44110
Engineered Wire Products produces the
following products in Upper Sandusky,
OH, Warren, OH, Las Cruces NM, and
upcoming Sherman, TX facility. Welded wire
reinforcement and reinforcing (D) deformed
and (W) plain/smooth to ASTM A1064.
Stainless steel mesh to ASTM A1022.
Rolls, structural and building sheets, base
and rebar mats, bent sheets, radius rolled
sheets. Galvanized and epoxy coated
mesh, industrial wire, straight and cut,
fabricated rebar, wire forming, sheer steel
stirrups.
828 4th St.
Elk River, MN 55330
(763) 441-1581
(763) 441-1596 fax
www.ermc.com
Epic Polymer Systems . . . . . . 1216
Paul Gill
19695 92A Ave.
[email protected]
Langley, BC V1M 3B3 Canada
(604) 513-1661
(604) 513-1669 fax
www.epicpolymer.com
Christian Guckel
[email protected]
Manufacturers of DYNAMEX™ Elastomeric
Bearings and LOAD+™ Fiber Reinforced
Rubber Bearings. Load bearing design,
engineering support and polyurethane
system solutions.
Batch Plants (Acromix), Hydra-Roll Mesh
Rollers, Mesh Benders, Coring Machines,
Hydra Steer Trailers
Essroc Italcementi Group . . . . 1219
3251 Bath Pike
Nazareth, PA 18064
(610) 837-6725
(610) 837-3352 fax
www.essroc.com
Christopher Roumie
[email protected]
ErgonArmor Inc. . . . . . . . . . . 778
450 Funston Road
Kansas City, KS 66115
(877) 982-7667
(601) 933-3381 fax
www.ergonarmor.com
Sam Engleman
[email protected]
Sealants and Coatings for Precast
Manufacturers of TX Active Cement, the
self-cleaning and de-polluting cement for
concrete construction.
[email protected]
Corrugated Steel Pipe for precast
members.
Euclid Chemical Co. . . . . . . . . 665
19218 Redwood Road
(800) 321-7628
(216) 481-7072 fax
www.euclidchemical.com
Michael Mahoney
[email protected]
Concrete Admixtures; Macro and Micro
Fibers; Concrete Repair; Concrete Sealants;
Decorative Colorants; Manufactured
Concrete Admixtures
EZG Manufacturing . . . . . . . . 1173
405 Watertown Road
Waterford, OH 45786
(800) 417-9272
(740) 962-2037 fax
www.ezgrout.com
Steve Wheeler
[email protected]
EZG Manufacturing produces mixers for
wet and dry cast applications as well as
customized delivery options for filling
molds.
BOOTH 624
EXHIBITOR DIRECTORY
F
Fister Inc. . . . . . . . . . . . . . .724
FORTA Corporation . . . . . . . . .643
1150 Lyon Road
100 FORTA Drive
Fabpro Polymers . . . . . . . . . . 766
Batavia, IL 60510
Grove City, PA 16127-6399
100 S. Fabpro Way
(800) 542-7393
(800) 245-0306
Kingman, KS 67068
(630) 761-0108 fax
(724) 458-8331 fax
(620) 532-4060
www.fisterquarries.com
www.forta-ferro.com
(620) 532-2571 fax
George Alewel
Bill Coursen
www.fabpropolymers.com
[email protected]
[email protected]
Aggregates; DCS Pigments; Armorguard
505; Surface & Form Retarders; Fister
50/50 Release Agents; Magnets; Victory
Bear Reveals & Chamfers; Plastic Chairs,
Wheels, Panel Pads & Slab Bolsters
FORTA Corporation is the oldest producer
of synthetic fiber reinforcement in the
world. Second-generation FORTA-FERRO®
macro fiber allows for a higher replacement
level of conventional steel reinforcement in
precast products.
Dave Bye
[email protected]
Fabpro Polymers is the premier developer
and manufacturer of synthetic fibers for
reinforced concrete and other applications.
Fascan International . . . . . . . . 401
4517 N. Point Blvd.
Baltimore, MD 21219
(410) 388-9144
(410) 477-5933 fax
www.fascan.com
Bernie Faloney
[email protected]
FASSI and JMG Cranes
Fast Formliners Co. . . . . . . . . 1010
1005 Miller Drive
Fitzgerald Formliners . . . . . . . 264
1500 E. Chestnut Ave.
Franmar Chemical Inc. . . . . . . .212
Santa Ana, CA 92701
PO Box 5565
(714) 547-6710
Bloomington, IL 61702
(714) 547-7958 fax
(309) 828-2900
www.formliners.com
(309) 827-7407 fax
Becky Stopnik
www.franmar.com
[email protected]
Dan Brown
Fitzgerald Formliners offers more than 300
standard formliner patterns. Our quality and
outstanding service make us the industry
leader in custom and seamless architectural
concrete.
Blue Bear Concrete Form Releases for all
surfaces, including latex. Concentrated for
cost savings. Biodegradable and renewable
formulations. VOC compliant in all states.
[email protected]
St. Clair, MO 63077
(636) 322-0080
(636) 322-0083 fax
Formcrete Fiberglass Products Inc. . .
. . . . . . . . . . . . . . . . . 1079
www.fastformliners.com
1900 Ray Davis Blvd.
Grant McCullough
Seminole, OK 74868
[email protected]
(800) 876-2474
Manufacturer of high quality elastomeric
form liners rated for high re-use for cast in
place or precast architectural concrete.
(405) 382-7770 fax
FBE Associates Inc. . . . . . . . . .335
513 N. Madison Ave.
www.formcrete.com
Scott Sutcliffe
[email protected]
Fiberglass Hole Forms and Pipe Shaping
Rings
G
G & K Uniform Services . . . . . . . .
. . . . . . . . . . . . . Precast Village
5995 Opus Parkway
Suite 500
Minnetonka, MN 55343
(952) 912-5500
(952) 912-5993 fax
www.gkservices.com
Suite 101
Venus Steffensen
Bay City, MI 48708
[email protected]
(989) 894-2785
G&K Services is a market leader in branded
identity apparel programs and facility
services. We have helped customers create
a lasting impression by enhancing image &
safety in the workplace.
(989) 894-2805 fax
www.manholepro.com
Patrick Race
[email protected]
MH Pro! software for take-off, drawing
generation and quoting for manholes and
drainage structures with data upload to
various accounting packages (including
Titan II).
BOOTH 278
BOOTH 825
EXHIBITOR DIRECTORY
Gantry Crane Trading LLC . . . . .242
Gensco Equipment (1990) Inc. . . . 244
Haarup North America Inc. . . . . . 116
4943 S.E. Bayshore Terrace
53 Carlaw Ave.
12695 N.E. Marx St.
Stuart, FL 34997
Toronto, ON M4M 2R6 Canada
Portland, OR 97230
(609) 263-6900
(416) 465-7521
(503) 954-1718
www.gantrytrading.com
www.genscoequip.com
(503) 206-8892 fax
Mike Mazzeo
Murray Sole
www.haarup.com
[email protected]
[email protected]
Soren Pedersen
Gantry Cranes
Rebar Cutters & Benders – Electric,
Hydraulic, Hand Held and Floor Models
[email protected]
Gar-Bro Manufacturing Co. . . . . 863
104 Bolton Sullivan Drive
Greenwood Plastics dba Trigard . . . .
. . . . . . . . . . . . . . . . . .321
Heber Springs, AR 72543
(501) 362-8171
1126 N. Kimball St.
(501) 362-7123 fax
Danville, IL 61832
www.garbro.com
(217) 442-9224
Jim Adams
(217) 442-9182 fax
[email protected]
Concrete Placing Equipment; Buckets;
Carts; Wheelbarrows
www.trigard.com
GCI Pipe Products Inc. . . . . . . .415
4125 Bonner Industrial Drive
Shawnee, KS 66226
(913) 441-8707
Blake Swinford
[email protected]
Burial Vaults
Complete batching and mixing solutions
for the concrete industry. Haarup counter
current mixers, complete plants, retrofits,
concrete transport and control systems.
Hamilton Form Company . . . . . 430
7009 Midway Road
Fort Worth, TX 76118
(817) 590-2111
(817) 595-1110 fax
www.hamiltonform.com
Jonathan Daily
[email protected]
H
Custom Steel Forms
Hamilton Kent . . . . . . . . . . . 748
Haala Industries Inc. . . . . . . . .883
77 Carlingview Drive
1201 Highway 4 S.
Toronto, ON M9W 5E6 Canada
PO Box 389
(800) 268-8479
[email protected]
Sleepy Eye, MN 56085
(416) 674-6960 fax
Pipe Forms; Box Culvert Forms; Pallets &
Headers
(507) 794-5821
www.hamiltonkent.com
(507) 794-5823 fax
Randy Reimer
www.haala.com
GCP Applied Technologies . . . . .154
[email protected]
Scott Haala
62 Whittemore Ave.
[email protected]
Cambridge, MA 02140
Rebar Mats; Wire Cone Cages; Trash
Guards; Safety Grates; Pond Skimmers;
Pipe Ties/Tie Rods; Lift Devices & Pocket
Formers; Median Barrier Connecting &
Anchor Pins; Median Barrier Cages; Hole
Formers & Gasket Ring Formers; Rebar
Stirrups; Wire & Rebar Forming; Rebar
Accessories; Metal Bar Supports
Gaskets for Manhole, Box Culvert and Pipe
Joints; Mechanically-installed or Cast-in
Flexible Pipe-to-Manhole Connectors;
Lifespan System Watertight Manhole
Frame/Cover; Pavement and Bridge Joint
Seals; Production Form Seals; Three-edge
Bearing Strip; Joint Tooling Measuring
Device
(913) 422-1142 fax
www.gcigroups.com
Kiran P. Giri
(617) 876-1400
(617) 498-4314 fax
www.gcpat.com
GCP Applied Technologies was formed in
January 2016 by the spin-off of W. R. Grace
& Co.’s construction products segment
and its packaging technologies business. The new GCP Applied Technologies will
continue to provide innovative concrete
admixtures and products, as well as new
technologies and world class service to
create value. The brand you know and
trust has a new name. Stop by booth
#154, we’re excited to share our latest
innovations with you!
HawkeyePedershaab . . . . . . . .624
506 S. Wapello St.
Mediapolis, IA 52637
(319) 394-3197
(319) 394-3977 fax
www.hawkeyepedershaab.com
Dave Strabala
[email protected]
The world’s leading manufacturer of
concrete pipe and manhole machinery.
Represents MBK cage and mesh welding
machinery for concrete pipe, box culvert
and precast industry.
EXHIBITOR DIRECTORY
Headed Reinforcement Corp. (HRC) . . . . . . . . . . . . . . . . . . . .986
Henry Company . . . . . . . . . . 821
1277 Boyles St.
11200 Condor Ave.
Houston, TX 77020
Fountain Valley, CA 92708
(713) 671-9564
(714) 557-1455
(713) 673-7702 fax
(714) 557-4460 fax
www.henry.com
www.hrc-usa.com
Tommy Harreld
Jeremy Maldonado
[email protected]
[email protected]
Ram-Nek Strips, Ram-Nek Coils, Butyl-Nek
Coils, Rub’R-Nek LTM Coils, Rub’R-Nek
External Joint Wrap, Concrete Primers,
Waterproofing Products, and Damnproofing
Products.
High Performance Reinforcement Products
for Structural Integrity and Constructability.
Helix Steel . . . . . . . . . . . . . 738
2300 Washtenaw Ave.
Suite 201
Ann Arbor, MI 48104
(734) 322-2114
(734) 786-1633 fax
www.helixsteel.com
Wes Dees
[email protected]
HELIX Micro-Rebar is the ONLY code
approved product of its kind that can
ELIMINATE PRIMARY REBAR AND
MESH in most utility precast products. HELIX is stronger, faster, safer and MORE
ECONOMICAL than rebar or mesh. BUY
AMERICA COMPLIANT product available.
Helser Industries . . . . . . . . . .730
10750 S.W. Tualatin Road
Tualatin, OR 97062
(503) 692-6909
(503) 692-1666 fax
www.helser.com
Karl Helser
[email protected]
Helser Industries is a custom sheet
metal fabrication shop specializing in the
manufacture of high quality custom steel
forms for the precast/prestressed industry.
BOOTH 706
Hiab USA Inc. . . . . . . . . . . . .132
12233 Williams Road
Perrysburg, OH 43551
(419) 481-2481
www.hiab.us.com
Robert Nichols
[email protected]
Crane Simulators; 477 Cranes; Forklifts
High Concrete Accessories . . . . .330
125 Denver Road
Denver, PA 17517
(800) 508-2583
(717) 336-9301 fax
www.highconcreteaccessories.com
Alicia Allamena
[email protected]
Engineered plastic embedments eliminate
need for make-shift parts to form voids and
cover holes in concrete, saving concrete
producers time and money.
Hill and Griffith Co. . . . . . . . . .678
1085 Summer St.
Cincinnati, OH 45204
(513) 921-1075
(519) 921-9180 fax
www.hillandgriffith.com
Bob Waterloo
[email protected]
Form Release Agents; Spraying Equipment;
Seasoning Agents; Concrete Dissolvers &
Rust Inhibitors
EXHIBITOR DIRECTORY
I
Innovative Brick Systems LLC . . . . .
Bedford Park, IL 60638
Icon X LLC . . . . . . . . . . . . . . . . . . . 1086
11625 Reed Court
(708) 458-2200
5525 Kaw Drive
Unit B
(708) 458-1176 fax
Kansas City, KS 66102
Broomfield, CO 80020
www.hoistlift.com
(844) 274-4366
(720) 890-6032
Jentry Prine
(913) 287-8452 fax
(720) 890-6038 fax
[email protected]
www.iconxusa.com
www.mbrick.com
U.S. manufacturer of high-capacity
pneumatic liftrucks with capacities from
22,000 to more than 125,000 lbs. Ideal
for rugged applications such as precast
concrete, each liftruck is 100% made in the
USA and backed by comprehensive parts
and service support.
Joel Foderberg
Mark Scott
[email protected]
[email protected]
Composite shear connectors for insulated
sandwich wall panels. Simple, fast,
economical composite insulated panel
construction. Engineering and testing data
included in a free design manual.
Form Liners and Thin Brick Systems
Hoist Liftruck Mfg. Inc. . . . . . . . 918
6499 W. 65th St.
Hydronix Ltd. . . . . . . . . . . . .572
692 W. Conway Road
Suite 24
Harbor Springs, MI 49740
(231) 439-5000
(231) 439-5001 fax
www.hydronix.com
Timothy Statler
[email protected]
Microwave Moisture Measurement for
Industrial Process Control
Hyster Company . . . . . . . . . .870
1400 Sullivan Drive
Greenville, NC 27834
(610) 823-5680
(252) 931-7877 fax
www.hyster.com
Dennis Scianna
[email protected]
Hyster Company offers 130 lift truck models
configured for gasoline, LPG, diesel and
electric power, with one of the widest
capacity ranges in the industry – from
2,000 to 105,000 lbs.
. . . . . . . . . . . . . . . . . 1166
Industrial Services International ISI
LLC . . . . . . . . . . . . . . . .445
9912 Glenolden Drive
Potomac, MD 20854
(301) 639-5489
Insteel Wire Products . . . . . . . .884
1373 Boggs Drive
Mount Airy, NC 27030
(336) 719-9000
(336) 783-4331 fax
www.insteel.com
Dean Hatley
[email protected]
[email protected]
Serving the industry for over 50 years,
Insteel is the nation’s largest producers of
high quality concrete reinforcing products.
Welded Wire Reinforcing; Strand; Pipe
Mesh; Engineered Structural Mesh
Mixer Wear Parts; Pan and planetary
Mixers; Complete Batching Plants
International GRC Association (GRCA)
(301) 299-0002 fax
www.isi-na.com
Brad Walker
. . . . . . . . . . . . . . . . . .375
Infiltrator Water Technologies . . .780
Riverside House
4 Business Park Road
4 Meadows Business Park
Old Saybrook, CT 06475
Camberley, Surrey GU17 9AB United
(860) 577-7030
Kingdom of Great Britain, Northern
www.infiltratorwater.com
Ireland
Donna Fiorentino
44 (0)330 111 4722
[email protected]
www.grca.org.uk
EZset by Infiltrator. Septic tank riser
systems offer the precaster strength and
durability. Infiltrator Water Technologies’
Quick4 chamber systems and EZflow
systems offer drainfield solutions for all
septic system applications.
Richard Walsh
[email protected]
To exchange knowledge and experience
concerning Glass Fiber Reinforced
Concrete (GFRC). To promote GFRC in
all its valid applications and advance the
interests of its members.
EXHIBITOR DIRECTORY
BOOTH 162
BOOTH 317
EXHIBITOR DIRECTORY
Inwesco Inc. . . . . . . . . . . . . .878
2824 N. Sylvania Ave.
J
Jonel Engineering . . . . . . . . . 564
500 E. Walnut Ave.
Fort Worth, TX 76111
J. McCoy Equipment Ltd. . . . . . 278
Fullerton, CA 92832
(817) 834-3310
155 North Port Road
(714) 879-2360
(817) 834-3315 fax
Port Perry, ON L9L 1B2 Canada
(714) 526-2397 fax
www.inwesco.com
(905) 985-0989
www.jonel.com
Georgia Worden
(905) 985-0570 fax
Allen Wiggins
[email protected]
Steel, Stainless Steel and Aluminum
Frames and Covers; Grating; Underground
and Surface Mounted Hardware; Powder
Coating
www.jmccoyequipment.com
[email protected]
John McCoy
Jonel Engineering is a leading provider of
batching control systems and operations
management software designed
specifically for precast, masonry and
concrete producers.
Isotec International . . . . . . . . .873
201 Longview St.
Canton, GA 30188
(770) 479-4775
(770) 479-1566 fax
www.isotecintl.com
Dan De Bry
[email protected]
Manufacturer of Urethane Mold elastomers
for cast or stamped concrete from 20A
to 90A. We also manufacture urethane
adhesives, coatings, foams and silicone
mold rubbers.
[email protected]
Wet Cast Production Systems; Batching
and Batch Controls; Polyurethane Molds
Jet Inc. . . . . . . . . . . . . . . . 762
750 Alpha Drive
Cleveland, OH 44143
(800) 321-6960
(440) 442-9008 fax
www.jetincorp.com
Chris Mandich
[email protected]
Aerobic Treatment Units; Commercial
Package Plants; Wastewater Chemicals
J-K Polysource Inc. . . . . . . . . .443
1241 E. Glendale Ave.
JVI Inc. . . . . . . . . . . . . . . . 630
7131 N. Ridgeway Ave.
Lincolnwood, IL 60712
(847) 675-1560
(847) 675-0083 fax
www.jvi-inc.com
James Voss
[email protected]
Bearing Pads; Slide Bearings; Plastic Shims;
Slotted Inserts; Flange Connectors; Hidden
Framing and Stair Connections; Embed
Plates
iwi group LLC . . . . . . . . . . . .424
Sparks, NV 89431
6069 Oakbrook Parkway
(775) 323-7117
Norcross, GA 30093
(775) 323-7385 fax
(770) 840-7060
www.jkpolysource.com
Kalmar USA Inc. . . . . . . . . . . 112
(770) 840-7069 fax
Mark Ludwig
415 E. Dundee St.
www.iwigroup.com
[email protected]
Ottawa, KS 66067
Richard Isaacson
Pipe Gaskets; Manhole Gaskets; Joint
Sealants; Pipe Joint Lube; Manhole
Connectors; Pre-Lube Gaskets; Manhole
Steps; Vault Terminators; Forming
Equipment; Steel Spacers
(785) 242-2200
[email protected]
Appraisals, Batch Plants, Components
& Parts, Concrete Buckets, Consulting,
Curing Equipment, Material Handling &
Storage, Mixer Accessories, Precast Form
Manufacturing, Quality Control & Safety,
Tools, Used Equipment Listings and Water
Heaters
Johnson Gas Appliance Company . . . . . . . . . . . . . . . . . . . .736
520 E. Ave. N.W.
Cedar Rapids, IA 52405
(800) 553-5422
(319) 365-6282 fax
www.johnsongas.com
Dan Hodel
[email protected]
Curing systems for Concrete: Pipe, Precast,
Prestress, Block, Paver & Rooftile industries
engineered for reliability and durability with
standard or customized controls, circulation
and exhausters.
K
www.kalmarusa.com
April Jacobson
[email protected]
Kalmar offers the widest range of cargo
handling solutions and services. Kalmar,
Making Your Every Move Count. www.
KalmarUSA.com
BOOTH 323
EXHIBITOR DIRECTORY
Kem-O-Kleen . . . . . . . . . . . 1203
KION North America Corporation . . . 1025 W.8th Ave.
. . . . . . . . . . . . . . . . . . 178
Lane International Corp. . . . . . 1055
10758 S.W. Manhasset Drive
Denver, CO 80204
2450 W. 5th North St.
Tualatin, OR 97062
(303) 425-0100
Summerville, SC 29483
(503) 692-9860
(303) 425-3356 fax
(843) 875-8000
(503) 692-9863 fax
www.kem-o-kleen.com
(843) 875-8380 fax
www.laneinternational.com
Ron Baer
www.kion-na.com
Scott Robertson
[email protected]
Rochelle Edwards
[email protected]
Kem-O-Kleen Acid Etching and Washing
Equipment; Val6 Portable Infra-Red Heaters
[email protected]
Poly Manhole Steps; Poly Vault Ladders;
EZ Lift Pins; Pulling Irons; Median Barrier
Loops; Spreader Bars
Kenco Corp. . . . . . . . . . . . . 1070
Kistner Concrete/Environment 21 . . Material Handling Equipment/Forklift Trucks
170 State Route 271
. . . . . . . . . . . . . . . . . .835
Ligonier, PA 15658
8713 Read Road
(724) 238-3387
PO Box 55
(724) 238-3187 fax
East Pembroke, NY 14056-0055
www.kenco.com
(800) 809-2801
Tracy Black
(585) 815-4701 fax
[email protected]
www.env21.com
Kenco furnishes attachments for excavators
ranging from mini to 200,000 pounds,
wheel loaders, backhoes dozers, and skid
steer machines.
King Hughes Fasteners . . . . . . 248
550 Fourth St.
Imlay City, MI 48444
(810) 721-0300
(810) 721-0400 fax
www.hogrings.com
Jason A. Hoeft
[email protected]
Hog ring fasteners, clips and application
tools for holding wire mesh.
King Steel Corporation . . . . . . .250
5225 E. Cook Road
Grand Blanc, MI 48439
(800) 638-2530
www.kingsteelcorp.com
Dino Pezzimenti
[email protected]
Stormwater treatment product designs
for concrete products made by concrete
precasters.
Konecranes Lift Trucks . . . . . . 1227
Anders Anderssons vag 13
Markaryd, Kronobergslan, 28523
Sweden
04 3373 300
04 3373 310 fax
www.kclifttrucks.com
Phil Stevens
[email protected]
Material Handling; Equipment Cranes;
Hoists and Equipment Services..
L
[email protected]
Landcon/Starcon Lifting Anchors . . . . . . . . . . . . . . . . . . . . . . 845
Steel Rod & Wire for Reinforcement;
Welded Wire Mesh
Suite 206
Mike Shall
180 Steeles Ave. W.
Thornhill, ON L4J 2T1 Canada
(416) 739-7904
(416) 739-9506 fax
www.landconproducts.com
Jason Brown
[email protected]
Lifting Anchors; Dogbones; Aluminum
Safety Steps; Paver/Block Splitters,
Handling Equipment, Paver Clamps
LAP Laser LLC . . . . . . . . . . . 582
1830 Airport Exchange Blvd.
Suite 110
Erlanger, KY 41018
(859) 283-5222
(859) 283-5223 fax
www.lap-laser.com
Liz Nguyen
[email protected]
Lap Laser manufactures high quality laser
projectors. When installed, these projectors
can project CAD drawings onto the work
surface to facilitate the manufacturing
process.
Latux Diamond Blades . . . . . . .687
3113 N.W. 25th Ave.
Pompano Beach, FL 33069
(800) 413-1427
(561) 533-9614 fax
www.latuxdiamondblades.com
Sonia Mirabal
[email protected]
LATUX is a growing manufacturer and
distributor for all diamond tools from
Diamond Blades to cup grinding wheels
and core bits up to 72” diameter.
BOOTH 468
BOOTH 478
EXHIBITOR DIRECTORY
Laurel Steel . . . . . . . . . . . . .542
Loveday Lumber Company . . . . 859
5400 Harvester Road
914 W. Airline Ave.
Burlington, ON L7L 5N5 Canada
Gastonia, NC 28052
334 N. 7th St.
(905) 681-6811
(704) 583-6060
McBee, SC 29101
(905) 541-2115 ttoll free
(704) 583-6002 fax
(843) 335-5814
(905) 634-7888 fax
www.lovedaylumber.com
(843) 335-5909 fax
www.laurelsteel.com
Bryan Edwards
www.marmac.com
Grant Fraser
[email protected]
Cort Calk
[email protected]
Custom Chamfer, Reveal and Forming
[email protected]
M
Manufacturer of pipe joint products since
1953. MacWrap external sealing band for
concrete pipe; Sealwrap sealing system for
three sided structures.
Bright, Galvanized and Epoxy Coated Wire
Mesh, Pipe Mesh, Manhole Mesh, Hoop
Steel, Box Culverts and Structural Mesh,
Cage Wire Paks & cut to length.
Mar Mac Construction Products Inc. . . . . . . . . . . . . . . . . . . .554
M.A. Industries Inc. . . . . . . . . .825
Liebherr Concrete Technology Co. . . . 303 Dividend Drive
Marks Metal Technology . . . . . .847
Peachtree City, GA 30269
10300 S.E. Jennifer St.
4100 Chestnut Ave.
(770) 487-7761
Clackamas, OR 97015
Newport News, VA 23607
(770) 487-1482 fax
(503) 656-0901
(757) 928-8547
www.maind.com
(503) 656-1985 fax
(757) 928-2489 fax
Scott Peacock
www.marksmetal.com
www.liebherr.us
[email protected]
Steve Tuttle
Herbert Botzenhart
Manhole Steps; Inserts; Concrete Test
Cylinders; VCT’s; Lifting Devices; Pulling
Irons & Pockets; Sump Pans; Step Testing
and Training
[email protected]
. . . . . . . . . . . . . . . . . .230
[email protected]
Mobile & stationary batch plants with
outputs from 40-340 yds. per hour, ring pan
& twin shaft mixers with sizes from 0.65-8
yds., concrete reclaimers and concrete
pumps.
LondonBoulder . . . . . . . . . . .437
1401 Fallon Ave.
Monticello, MN 55362
(612) 940-7314
www.londonboulder.com
Mike Frandsen
[email protected]
LondonBoulder’s Patented & Engineered
“Big Block” Retaining Wall System was
designed with maximum strength, flexibility
and quality for the producer and installer.
Multiple shapes can be manufactured from
the same form with no franchise, royalty
or license fees. LondonBoulder now has
forms to manufacture 60”, 52”, 42”, 39”and
28” blocks with multiple face texture
options.
Martin Engineering . . . . . . . . .331
Maema srl Unipersonale . . . . . 1050
1 Martin Place
Viale del Lavoro, 9
Neponset, IL 61345-9766
Villafranca di Verona, Verona, 37069
(309) 852-2384
Italy
(800) 544-2947 ttoll free
39 045 6305781
(800) 814-1553 fax
39 045 6309178 fax
www.martin-eng.com
www.maemasrl.it
Customer Service
Mauro Gobbo
[email protected]
[email protected]
Martin’s complete line of industrial Cougar®
Vibrators solves your material flow
problems including vibration for tables and
concrete forms. Increase efficiency. Stop
by booth 331.
Rough surfacing finishing systems for
processing concrete elements as precast
panels, curbs, paving stones and columns.
MAPEI/GRT . . . . . . . . . . . . 1202
2978 Center Court
MAX USA Corp. . . . . . . . . . . 147
Eagan, MN 55121
257 E. 2nd St.
(651) 454-4151
Mineola, NY 11501
(651) 454-4252 fax
(615) 517-6331
www.mapei.com/XG-EN
(516) 741-3272 fax
Claudio Genoria
www.maxusacorp.com
[email protected]
John Dominice
Mapei/GRT manufactures and markets a
strong offering of chemical admixtures and
auxiliary products for the specific needs of
the precast concrete industry.
Precast Forms and Molds; Bell Bands; Joint
Rings
[email protected]
Rebar Tying Tools; Rebar Cutters
BOOTH 836
EXHIBITOR DIRECTORY
MCT Group Inc. . . . . . . . . . . 1038
Midspec Inc. . . . . . . . . . . . . 685
Mixer Systems Inc. . . . . . . . . . 318
10285 Mott Drive
19180 Linden Drive
PO Box 10
Reno, NV 89521
PO Box 307
Pewaukee, WI 53072
(775) 313-0708
Rogers, MN 55374
(262) 691-3100
(775) 242-3677 fax
(763) 428-8500
(262) 691-3184 fax
www.mct-usa.com
(763) 428-8515 fax
www.mixersystems.com
Alessandro DiCesare
www.midspecinc.com
Lesley Hill
[email protected]
Mike Marshall
[email protected]
Concrete Batching Plants
Manufacturer and distributor of metal and
plastic rebar spacers and ferrule, coil and
forged inserts, vinyl chamfer and bar ties.
Spiral Blade, Paddle, Pan, Planetary, and
Twin Shaft Mixers; Batch Plants; Bins and
Silos; Moisture Control Systems; Traveling
Buckets; Automation Controls; Crushers.
Meadow Burke . . . . . . . . . . .636
2835 Overpass Road
Tampa, FL 33619
(813) 248-1944
(813) 248-5409 fax
www.meadowburke.com
Mike Kovalick
[email protected]
Meadow Burke is a manufacturer and
distributor of Burke Lift, Rapid-Lok, Hook
Lift, Erector Connector, Burke Chemicals,
Bowco products and more.
Metal Partners International . . . 1212
55 S. Main St.
Suite 394
Naperville, IL 60540
(630) 566-5183
(630) 566-5183 fax
www.metalpi.com
Barrett Davids
[email protected]
Rebar; Rebar Fabrication; Dowel Bars;
Epoxy Rebar; Epoxy Dowel Bars; Wire
Mesh; PC Strand; Wire Rod
Middle Tennessee State University . . . . . . . . . . . . . . Precast Village
1301 E. Main St.
PO Box 24
Murfreesboro, TN 37132
(615) 767-4478
(615) 898-5296 fax
www.concrete-mba.com
Ayaz Ahmed
[email protected]
Concrete Industry Management MBA
booth
Mi-Jack Products . . . . . . . . . .716
3111 W. 167th St.
MOLDTECH . . . . . . . . . . . . 1056
Hazel Crest, IL 60429
Ctra. Sevilla-Málaga, Km. 10,5
(708) 596-5200
PI Piedra Hincada
www.mi-jack.com
Alcalá de Guadaíra, Seville, 41500
Mike Lanigan, Jr.
Spain
[email protected]
34 955 444 190
Mi-Jack Products has been engineering
and manufacturing the most durable,
reliable material handling equipment in
the industry for over 60 years. Mi-Jack’s
advanced and versatile Rubber Tired
Gantry (RTG) cranes, with options such as
Power-on-Demand, GPS guided steering,
and custom dimensions provide optimum
performance in even the most demanding
situations. All of Mi-Jack’s RTG cranes are
manufactured to ISO 9001:2008 certified
standards and feature innovations in
electronically controlled hydraulics for
faster, smoother and more productive
operations.
www.moldtechsl.es
®
Millner-Haufen Tool Company . . 1068
PO Box 121085
Eric de Bruin
[email protected]
Tilting tables, molds for beams, columns,
lift shafts, box culverts and 3 dimensional
molds. Our equipment is used for
residential, industrial buildings and civil
works.
Molenaar North America Inc. . . . 875
3625 Greenside Court
Dacula, GA 30019
(404) 493-7628
www.molenaar-americas.com
Corné Molenaar
[email protected]
Spacers – Concrete
Nashville, TN 37212
(888) 365-3301
MorOil Technologies . . . . . . . .413
(888) 365-3301 fax
PO Box 127
www.millnertools.com
Davidson, NC 28036-0127
[email protected]
(704) 795-9595
Millner-Haufen Tool Company manufactures
and sells specialty cutting and drilling tools.
(704) 752-4171 fax
www.moroil.com
Ron Powell
[email protected]
Biodegradable and conventional release
fluids. MorOil Technologies manufactures
concrete release fluids from a variety
of base fluids, including water. We have
releases for every type of application swab, brush, spray, dip - and form material
- metal, wood, epoxy, etc.
EXHIBITOR DIRECTORY
MPAQ Automation Inc. . . . . . . .867
14-3300 Ridgeway Drive
Mississauga, ON L5L 5Z9 Canada
(905) 542-9411
(905) 542-9433 fax
www.mpaq.com
Mario Palmitesta
[email protected]
Batching and moisture control systems for
concrete product plants..
N
National Precast Concrete Association
. . . . . . . . . . . . . . . . . . . 484
BOOTH 936
1320 City Center Drive
Suite 200
Carmel, IN 46032
(317) 571-9500
(800) 366-7731 ttoll free
(317) 571-0041 fax
www.precast.org
Ty Gable
Founded in 1965, NPCA has grown to
become an international trade association
representing 900 companies and suppliers
that manufacture hundreds of precast,
prestressed and reinforced concrete pipe
products for underground and aboveground applications. NPCA member
companies manufacture products that
create and rebuild infrastructure, protect
the environment and offer modularity,
customization and infinite creative design
possibilities across all sectors of the
construction industry. NPCA provides
members with the latest technical and
industry information through a host
of publications, educational seminars,
product committees and conferences.
The association promotes high quality
standards and safety through its education
component and its plant certification
program, which is accredited by the
American National Standards Institute.
National Wire LLC . . . . . . . . . 786
New Hampton Metal Fab . . . . . 706
12262 F.M. 3083
928 W. Milwaukee St.
Conroe, TX 77301
New Hampton, IA 50659
(936) 760-2040
(641) 394-4111
(936) 760-4080 fax
(641) 394-4542 fax
www.nationalwirellc.com
www.nhmfcorp.com
Perry Fisher
Jamie Wegner
[email protected]
[email protected]
Welded Wire Reinforcement
Wet-Cast & Dry-Cast Forms; Custom
Forms; Concrete Buckets; Pallet & Header
Rings; Pipe Testers; Custom Job Shop
Manufacturer
Neenah Foundry Co. . . . . . . . .912
2121 Brooks Ave.
Neenah, WI 54956
(800) 558-5075
(920) 729-3661 fax
www.neenahfoundry.com
Greg Hornbuckle
greg.hornbuckle@neenahenterprises.
com
Manhole Frames & Covers; Inlet Grates;
Trench Grates; Access Hatches; Bollards;
Tree Grates; Bridge Scuppers; Airport
Castings; Detectable Warning Plates
Nordimpianti System SRL . . . . 1036
Via Erasmo Piaggio 19/A
Chieti, 66100 Italy
39 0871 540 222
39 0871 562 408 fax
www.nordimpianti.com
Daniela Consorte
[email protected]
Technology for precast and prestressed
concrete industry.
EXHIBITOR DIRECTORY
Northrock Industries Inc. . . . . . .363
Numesh Inc. . . . . . . . . . . . . 360
OVERTON Safety Training Inc. . . . 240
3688 Horseblock Road
3000, Francis-Hughes
PO Box 6297
Medford, NY 11763
Laval, QC H7L 3J5 Canada
Aloha, OR 97007-0297
(631) 924-6130
(800) 363-0847
(503) 356-0403
(631) 924-6369 fax
(450) 663-9049 fax
www.overtonsafety.com
www.northrockindustries.com
www.numesh.com
Rob Scherbarth
Brian Robertson
Michel Mongeau
[email protected]
[email protected]
[email protected]
Concrete Vibrators
Numesh specializes in the manufacturing of
steel products such as engineered welded
wire reinforcement, building wire mesh,
pipe mesh, tunnel segments, structural
mesh and continuous steel chairs. Serving
the Canada and the US markets.
OVERTON Safety Training provide solutions
for OSHA compliance for cranes, forklifts,
aerial and rigging professionals; including
national certification for operators.
Norwalk Precast Molds . . . . . . 344
205 Industrial Parkway
Norwalk, OH 44857
(419) 668-1639
(419) 668-9156 fax
Oxford Industrial Technologies . . 487
PO Box 736
Stevenson, CT 06491
O
(203) 268-6030
[email protected]
Ohio Electric Control Inc. . . . . . 159
www.oxfordtechusa.com
Quality molds for the precast industry
proudly made in the U.S.A. since 1906.
2395 Rock Road
www.norwalkprecastmolds.com
Loren Schild
Norweco Inc. . . . . . . . . . . . .346
220 Republic St.
Norwalk, OH 44857
(419) 668-4471
(800) NORWECO ttoll free
(419) 663-5440 fax
www.norweco.com
Scott Hetrick
[email protected]
Ashland, OH 44805
(419) 289-1553
(419) 289-5555 fax
www.oecinc.net
Bob McMullen
(203) 445-1240 fax
George Domizio
[email protected]
Over sixty years in the Concrete Industry
gave us The edge with engineering, and
developing various Precast Concrete
accessories, including The First Utility Lift
System.
[email protected]
Water and Wastewater Treatment;
Wastewater Control Panels; OEM Control
Panels; Float Switches; Float Brackets; Vent
Caps; Weirs
P
Palfinger North America . . . . . .468
7942 Dorchester Road
Oklahoma Steel & Wire . . . . . . 323
Niagara Falls, ON L2G 7W7 Canada
Highway 70 S.
(905) 374-3363
Madill, OK 73446
www.palfinger.com
(580) 795-7311
Nox-Crete Products Group . . . . .162
Kristi Kraneyk
(580) 795-7422 fax
1444 S. 20th St.
[email protected]
www.okbrandwire.com
Truck-Mounted Cranes & Forklifts
Omaha, NE 68108
Johnny Raper
(402) 341-2080
[email protected]
(402) 341-9752 fax
Manufacturer of Welded Wire
Reinforcement; Pipe Fabric; Mine Mesh
Coiled Rebar; Wire Rods; Galvanized and
Bright Basic Industrial Wire; Straight & Cut
Wire; Erosion Control Wire; Agricultural
Fencing and various other wire products
Norweco manufactures small flow water
and wastewater treatment systems that
make use of precast concrete tankage.
www.nox-crete.com
Jeff Bishop
[email protected]
Nox-Crete manufactures high-performance
precast form release agents, form and
equipment cleaners, water repellent
sealers, cures and more. Quality concrete
chemicals since 1956.
Paolo Nanfito Industrial Machine SL . . . . . . . . . . . . . . . . . . 1057
Tomás Romero de Castilla, 5 2° C
Mérida, Badajoz, 06800 Spain
349 2430 4478
www.pnprecast.com
Macarena Herrera
[email protected]
Precast – Making Machinery
EXHIBITOR DIRECTORY
BOOTH 1205
Paragon Products . . . . . . . . . .984
Paul Jacks USA LLC . . . . . . . 1028
Pennsylvania Insert Corp. . . . . . 317
1516 E. Mapleleaf Drive
7950 N.W. 53rd St.
490 First Ave.
Mount Pleasant, IA 52641
Suite 337
Royersford, PA 19468
(319) 385-1550
Miami, FL 33166
(610) 948-9688
(319) 385-1555 fax
(786) 728-8660
(610) 948-4975 fax
www.paragonproducts-ia.com
(866) 480-9591 fax
www.painsert.com
Doug Spenner
www.pauljacksusa.com
Kyle Stahl
[email protected]
Jorge Hernandez
[email protected]
Precast Spacer Wheels; Panel Pads; Test
Cylinders; Bar Supports; Hog Slat Chairs;
Mesh Supports; Shims; Tilt-up Chairs
[email protected]
Stressing and Post-Tensioning Jacks; Strand
Pushing Machines; Spare Parts; Gang
Pulling Equipment
Aluminum & Steel Access Hatches; Shiplap
Pallets; Threaded Inserts; Bolt Pocket
Formers; Pulling Irons; Sumps; Hex Nut
Inserts; Duct Terminators
PAVE TECH Inc. & PROBST GmbH . . . Pentair . . . . . . . . . . . . . .
Pathfinder Systems . . . . . . . . 646
695 Ottawa Beach Road
Holland, MI 49424
. . . . . . . . . . . . . . . . . 1054
(616) 395-8447
PO Box 576
Solon, OH 44139
(616) 395-5995 fax
Prior Lake, MN 55372
(440) 248-0100
www.pathfindersystem.com
(952) 226-6400
www.erico.pentair.com
Larry Hilldore
(952) 226-6406 fax
Julian Albrigo
[email protected]
www.pavetech.com
[email protected]
Pathfinder is a state of the art equipment
supplier for the hardscape, masonry, pipe
and precast industries including world
class service, parts supply and turnkey
installations.
Glenn Wrobleski
[email protected]
1074
34600 Solon Road
LENTON® engineered systems for precast
concrete applications.
Clamps specifically designed for precast
concrete structures. Forklift, loader &
crane attachments for efficient plant & yard
handling. Loader & excavator attachments
for site handling & installation.
EXHIBITOR DIRECTORY
Polylok Inc. . . . . . . . . . . . . .404
3 Fairfield Blvd.
Precast/Prestressed Concrete Institute
. . . . . . . . . . . . . . . . . .684
Press-Seal Corporation . . . . . . 312
2424 W. State Blvd.
Wallingford, CT 06492
200 W. Adams St.
Fort Wayne, IN 46808
(203) 265-6340
Suite 2100
(260) 436-0521
(203) 284-8514 fax
Chicago, IL 60606
www.press-seal.com
www.polylok.com
(312) 786-0300
[email protected]
Patrick Mulhall
www.pci.org
[email protected]
[email protected]
Precast Concrete Accessories; Wastewater
products; Molds and Drainage
The Precast/Prestressed Concrete
Institute (PCI) is the technical institute
for the precast concrete structures
industry. PCI develops, maintains, and
disseminates the Body of Knowledge for
designing, fabricating, and constructing
precast concrete structures and systems;
and provides technical resources,
continuing education, events, and much
more. PCI also operates the world’s
leading certification program for firms
and individuals in the precast concrete
structures industry.
Designer and manufacturer of sealing
products for underground collection
systems worldwide.
Polytek Development Corp. . . . .879
55 Hilton St.
Easton, PA 18042
(610) 559-8620
(610) 559-8626 fax
www.polytek.com
Bill Scheetz
[email protected]
Liquid mold rubbers for casting, forming
and texturing concrete.
Precise Forms Inc. . . . . . . . . . 478
Power Adhesives . . . . . . . . . .865
201 N. Spruce St.
1209 Lilac Road
Bates City, MO 64011
Charlotte, NC 28209
(816) 690-3400
(704) 334-2425
(816) 690-0080 fax
(704) 334-2435 fax
www.preciseforms.com
www.poweradhesives.com
Mike Pickell
Lee Stegall
[email protected]
[email protected]
Cast Tec Hot Melt Glue system for
Concrete Forms.
All aluminum hand set forming system
to include, pallet/ headers deck adaptors
and haunch corners. A complete line of
supporting hardware.
Precision-Hayes International . . .341
704 W. Simonds Road
Seagoville, TX 75159
(972) 287-2390
(972) 287-4469 fax
www.precision-hayes.com
Paul Hohensee
[email protected]
Around the glove or around the corner,
PRECISION-HAYES International is
committed to be the first choice provider of
pre-stressed concrete products.
Prestress Supply Inc. . . . . . . . . 718
1804 W. Lake Parker Drive
Lakeland, FL 33805
(863) 683-4492
(863) 683-2886 fax
www.prestresssupply.com
Randy Ernest
[email protected]
Curing Covers; Form Protection Coatings;
SLIPPIT Form Release; Wire Ties; Bar
Chairs; Prestress and Post-Tension Chucks;
Hydraulic Stressing Jacks; Load Cells; T-630
Concrete Transporters
ProAll . . . . . . . . . . . . . . . 1218
5810 - 47 Avenue
Olds, AB T4H 1V1 Canada
(403) 335-9500
www.proallinc.com
Brett Fillmore
[email protected]
ProAll Reimer Mixers create solutions for
high quality, cost-effective concrete. Isn’t
it time you took control of your concrete
production?
PTAC/Edge^Revit . . . . . . . . . .149
21 S. Tarragona St.
Suite 101
Pensacola, FL 32502
(850) 432-8446
www.edgeforrevit.com
Jordan Watkins
[email protected]
Making Edge^Revit work for the precast
industry as AUTODESK’s solution associate
for Precast.
EXHIBITOR DIRECTORY
Q
Redi-Rock . . . . . . . . . . . . . .546
QMC Hydraulic Cranes . . . . . . 1205
Charlevoix, MI 49720
18071 Mount Washington St.
(866) 222-8400
Fountain Valley, CA 92708
(231) 237-9521 fax
(714) 754-0337
www.redi-rock.com
www.qmccranes.com
Kevin Loe
Rex McAfee
[email protected]
[email protected]
Redi-Rock is the industry leader in precast
large block retaining wall systems. It
is the parent company of Pole Base™
architecturally designed precast concrete
foundation for outdoor site lighting and
other applications.
Since 1977, QMC Hydraulic Cranes has
supplied custom boom trucks to the
precast industry. Made in U.S.A.
R
05481 US 31 S.
Robert Ober & Associates LLC . . 836
Ratec LLC . . . . . . . . . . . . . . . . . . . . 649
300 E. Sonterra Blvd. #310
6003 126th Ave. N.
San Antonio, TX 78258
Suite A
(210) 569-9262
Clearwater, FL 33760
www.robertober.com
(727) 363-7732
Lee Richardson
(727) 363-7463 fax
[email protected]
www.ratec.org
Concrete Plant Developers/Installers.
Provide plant installation, structural erection
and full retrofit undertakings.
Mathias Reymann
[email protected]
Magnets; Rails; Custom-Made & Hydraulic
Forms
Rod Chomper Inc. . . . . . . . . . 471
4249 Blue Star Highway
Rebar Machine Sales Inc. . . . . . 333
Holland, MI 49423
15005 Blossom Valley Lane
(616) 405-4573
El Cajon, CA 92021
(616) 392-9677 fax
(619) 390-1166
www.rodchomper.com
(619) 390-1165 fax
Brian Bouwman
www.rmsrebar.com
[email protected]
Brett Kerr
[email protected]
Reinforcing Steel Fabrication Equipment
ReCon Wall Systems Inc. . . . . . .222
7600 W. 27th St. #229
St. Louis Park, MN 55426
(952) 922-0027
(952) 922-0028 fax
www.reconwalls.com
Stanley Hamilton
[email protected]
Choose ReCon retaining walls for the
aesthetics you want and the performance
you need. Tall gravity walls (20’) and taller
reinforced walls.
Rebar Cutters; Benders; Circle Machines;
Shear Lines; Rotary Benders made in the
USA
RoMix Inc. . . . . . . . . . . . . . .379
BOOTH 166
PO Box 1110
Colleyville, TX 76034
(800) 331-2243
(817) 685-0877 fax
www.romixchem.com
Cliff Anderson
[email protected]
“RO-396 High Performance Release Agent”
is: NSF approved, EPA VOC compliant, nontoxic, biodegradable and economical.
EXHIBITOR DIRECTORY
Rosetta Hardscapes . . . . . . . . 562
Schnell S.p.A. . . . . . . . . . . . 1040
Shuttlelift . . . . . . . . . . . . . .813
05481 US 31 S.
Via Borghetto, 2
49 E. Yew St.
Charlevoix, MI 49720
Montemaggiore al Metauro, PU,
Sturgeon Bay, WI 54235
(231) 675-3032
61030 Italy
(920) 743-8650
(231) 547-9171 fax
39 0721 878711
(920) 743-1522 fax
www.discoverrosetta.com
39 0721 8787330 fax
www.shuttlelift.com
Roger Clark
www.schnell.it
Kurt Minten
[email protected]
Simone Bruscia
[email protected]
You are a pioneer. Shouldn’t you make
something exceptional? Partnership with
Rosetta Hardscapes means specialized wet
cast equipment, unique molds, training,
and support that will encourage your
business to grow. Shake up hardscape
industry standards with Rosetta, and make
the most inventive and attractive wet-cast
concrete materials on the market today.
[email protected]
Shuttlelift mobile gantry cranes are the
preferred “customer inspired lifting
solution” for heavy lifting requirements
and are manufactured to specification for a
multitude of applications.
Reinforcement Processing Equipment
Scougal Rubber Corp. . . . . . . .772
885 Denmark Drive
Suite 103
McCarran, NV 89434
(775) 284-8500
(775) 284-8501 fax
www.scougalrubber.com
S
Scott Nelson
Scale-Tron Inc. . . . . . . . . . . 1032
2113C St. Regis St.
Dollard des Ormeaux, QC H9B 2M9
Canada
(514) 940-0337
(514) 940-0342 fax
www.scaletron.com
Chris Shawcroft
[email protected]
Complete precast plant automation
including PLC/touch screen controls,
moisture sensors, touch-screen silo
inventory displays, temperature sensors.
Ocmer planetary/twin-shaft mixers and
central mix plants.
Schlusselbauer North America LLC . .
. . . . . . . . . . . . . . . . . .924
2607 Grandview Ave.
Nashville, TN 37211
(615) 742-7274
www.sbt-na.biz
Max Cikerle
[email protected]
Systems for production of concrete pipe
and manhole components. PERFECT
production system for monobases,
production technology for the new sanitary
sewer pipe system PERFECT PIPE, fully
automated handling systems.
[email protected]
Steel Reinforced Elastomeric Bearings;
Plain Elastomeric Bearings; PTFE Slide
Bearings; Vibration Isolation Bearings;
Custom Molded Rubber Parts; Road Plate
Ramps
Sicoma North America Inc. . . . . 936
11300 47th St. N.
Clearwater, FL 33762
(727) 575-7999
(727) 575-7998 fax
www.sicoma.biz
Marianne Johnson
[email protected]
Concrete Mixers
SIGMA Corp. . . . . . . . . . . . .756
700 Goldman Drive
SealGuard Inc. . . . . . . . . . . 1034
Cream Ridge, NJ 08514
1015 Foggy Hollow Road
(850) 206-7675
Gibsonia, PA 15044
www.sigmaco.com
(866) 625-4550
Harry L. Bair
(724) 625-2392 fax
[email protected]
www.sealguardinc.com
Municipal Construction Castings; Truck
Grates; Hydraulic Cement
Teresa Gomori
[email protected]
SealGuard is a supplier of quality
engineered solutions for concrete
assembly, maintenance and repair,
designed for speed, ease of use and cost
efficiency.
Sika Corporation . . . . . . . . . .530
201 Polito Ave.
Lyndhurst, NJ 07071
(201) 933-8800
(201) 933-6225 fax
sa.sika.com
Jeremy Chilton
[email protected]
Concrete Admixtures; Concrete Repair &
Protection
EXHIBITOR DIRECTORY
SIMEM America Corp. . . . . . . .479
Skako Concrete Inc. . . . . . . . . 848
12100 Crownpoint
7985 Dunbrook Road
Suite 100
Suite F
San Antonio, TX 78233
San Diego, CA 92126
(210) 581-8600
(858) 271-1630
(210) 581-8601 fax
(858) 271-0924 fax
www.simem.com
www.skako.com
Brent Bergt
John Leszcynski
[email protected]
[email protected]
Designing and manufacturing batching
and mixing plants (stationary and mobile).
Planetary and Twin-Shaft Mixers, Concrete
Reclamation and Water Treatment
Equipment for over 50 years.
Counter-Current Mixer; Twinshaft Mixer;
Traveling Bucket; Concrete Batch Plants;
Skakomat 600-SQL Computer Control,
ROTOCONIX Mixer
SLAB Innovation Inc. . . . . . . . .166
Sioux Corporation . . . . . . . . .313
5030 Ramsay
1 Sioux Plaza
St-Hubert, QC J3Y 2S4 Canada
Beresford, SD 57004
(450) 656-4666
(605) 763-4032
(450) 656-2843 fax
(605) 763-3334 fax
www.slabinnovation.com
www.sioux.com
Benoit Slavinski
Dave Sternquist
[email protected]
[email protected]
SLAB Innovation, Inc. – Equipment
manufacturing company specialized
in automated customized production
line for the concrete industry. Robotic
packaging, inspection vision systems,
pallet handling, antiquing system, grinding,
polishing, splitting line, clamp cuber, dry
cast specialty mold, wet cast, authorized
FANUC Integrator.
Sioux Corporation manufactures industrial
Water Heaters; Steam Generators; Water
Chillers; Pressure Washers and Steam
Cleaners for various Precast and Ready-mix
concrete applications since 1939.
SIP Industries/Serampore . . . . 1084
2900 Patio Drive
Houston, TX 77017
(713) 923-6111
(713) 923-6114 fax
www.sipindustries.com
Bharat Agarwal
[email protected]
Municipal Castings Cast Iron or Ductille
Iron: Manhole Rings & Covers; Frames &
Grates; Valve Boxes; Meter Boxes; Trench
Grates; Tree Grates; Fabricated Grates;
Logo Castings
Smith Truck Cranes & Equipment Co. . . . . . . . . . . . . . . . . . . 1178
307 Monroe Falls Ave.
Cuyahoga Falls, OH 44221
(330) 929-3303
(330) 929-9551 fax
www.smithtruckcranes.com
Tim Smith
[email protected]
Truck Mounted Cranes; Equipment
Maintenance & Repair, Cranes & Boom
Trucks
BOOTH 814
EXHIBITOR DIRECTORY
Smooth-On Inc. . . . . . . . . . . 1060
5600 Lower Macungie Road
SOMMER Anlagentechnik GmbH . . .
. . . . . . . . . . . . . . . . . . 819
Spec Formliners Inc. . . . . . . . .380
1038 E. 4th St.
Macungie, PA 18062
2127 Brandywine Court
Santa Ana, CA 92701
(610) 252-5800
Lakeland, FL 33813
(714) 429-9500
(610) 252-6200 fax
(863) 327-3042
(714) 429-1460 fax
www.smooth-on.com
www.sommer-landshut.de
www.specformliners.com
Ricky Rios
Gary Sparks
Steve Garman
[email protected]
[email protected]
[email protected]
Smooth-On mold rubbers are used every
day to make architectural elements,
concrete stone veneer, form liners,
concrete countertops, GFRC panels,
concrete statues and furniture and the list
goes on.
Automated Precast Manufacturing Systems
and Equipment, Mechanized Forms and
Moulds and Computerized Manufacturing
Software for Precast Plants.
Spec Formliners’ industry leading
architectural concrete formliners are now
available in 4’ x 12’ plastic providing 20%
more coverage, reduced cost and fewer
seems.
Soil Retention Products Inc. . . . .332
2501 State St.
Carlsbad, CA 92008
(760) 966-6090
(760) 966-6099 fax
www.soilretention.com
Jan Jansson
[email protected]
Plantable concrete systems®; consisting
of: Verdura®, a fully plantable retaining wall
system; Drivable Grass®, a permeable,
flexible and plantable pavement systems;
and Enviroflex, an Interlocking ACB
revetment system.
solidian GmbH . . . . . . . . . . .580
Sigmaringer Strasse 150
Albstadt, 72458 Germany
49 07431 102670
49 07431 1062670 fax
www.solidian.com
Roland Karle
[email protected]
Fiberglass Reinforcements; Carbon Fiber
Reinforcements; Shaped Components;
Free Form Reinforcements; Customized
Reinforcements; Spacers; Fixation
Technology; Dimensioning and Structural
Designs; On-site Service in Prefab Plants
Southern Copper and Supply . . . . .
. . . . . . . . . . . . . . . . . .457
Spillman Company . . . . . . . . .604
875 Yeager Parkway
1701 Moler Road
Pelham, AL 35214
Columbus, OH 43207
(205) 664-9440
(614) 444-2184
(800) 289-2728 ttoll free
(614) 444-1231 fax
(205) 664-1365 fax
www.spillmanform.com
www.southerncopper.com
Theodore W. Coons
Garret Herringdon
[email protected]
[email protected]
Copper and resistance welding supplies
used in the manufacturing process of
welded wire mesh.
SPANCRETE . . . . . . . . . . . . 700
N16 W23415 Stoneridge Drive
Waukesha, WI 53188
(414) 290-9000
(414) 290-9130 fax
www.spancrete.com
Terry Dittrich
[email protected]
Spancrete was founded in 1946 and is
recognized as both the industry pioneer
and the world leader in the design,
manufacture and distribution of precast,
prestressed concrete products and
solutions. Spancrete also develops and
distributes the equipment that produces
prestressed, precast concrete, worldwide.
Nothing is stronger, more durable or more
versatile than the Spancrete® Brand.
Spancrete is building innovation.
Custom wetcast steel forms, EZYSTRYP® magnets, plastic rebar and mesh
spacers, automated wetcast equipment
from Weckenmann, automated drycast
equipment from Teksam, form hardware
and accessories.
Splice Sleeve North America Inc. . . .
. . . . . . . . . . . . . . . . . .855
38777 W. Six Mile Road
Suite 205
Livonia, MI 48152
(734) 838-0420
(734) 838-0422 fax
www.splicesleeve.com
Toshi Yamanishi
[email protected]
NMB Splice-Sleeve is the original grouted
coupler for full tension/compression
precast connections. NMB is the only Type
2 grouted coupler with an ICC-ES ESR and
has performed flawlessly worldwide at
more than 25 million connections for over
40 years.
BOOTH 906
EXHIBITOR DIRECTORY
STACK-IT Inc. . . . . . . . . . . . .447
Steam Engineering . . . . . . . . .339
Strong Products LLC . . . . . . . .906
PO Box 4087
40 Industrial Parkway N.
PO Box 1023
Everett, WA 98204
Aurora, ON L4G 4C2 Canada
Battle Creek, MI 49016
(253) 927-8520
(647) 749-4064
(269) 274-4286
www.stackit.net
(800) 973-1999 ttoll free
(888) 959-9539 ttoll free
Les Music
(647) 749-4065 fax
(269) 962-1371 fax
[email protected]
www.vortomech.com
www.strongproductsllc.com
STACK‐IT Manhole & Catch Basin
Management System for Estimating, Take‐
offs & Production Drawings, Pro‐Trac (the
best On‐Screen Protractor) and a wide
range of Data Uploaders and Integration
Tools.
Nicholas Lees
Sam Strong
[email protected]
[email protected]
Steam Generator Industrial Heaters, Block
Plants and Pre-Cast Curing Systems
Biodegradable Releases offering
exceptional performance. All are unique
water-clear Biodegradable Form Releases,
Mixer Rinses, Spatter Releases. All
contain Zero Water, Zero Vegetable
Oils, Zero Evaporative Solvents. All are
Environmentally/Worker Friendly, Low Odor
and Low V.O.C. Compliant.
Stalite . . . . . . . . . . . . . . . . 274
PO Box 1037
Salisbury, NC 28145
(704) 637-1515
(704) 642-1572 fax
www.stalite.com
Paul Hoben
[email protected]
Stalite manufactures high performance,
high strength lightweight aggregates.
Concrete produced with Stalite offers
design flexibility and substantial cost
savings by providing less dead load, longer
spans, better fire ratings, thinner sections,
smaller size structural members, less
reinforcing steel and lower foundation
costs.
Standley Batch Systems Inc. . . . 814
505 Aquamsi St.
Cape Girardeau, MO 63703
(800) 325-8084
(573) 334-3704 fax
www.standleybatch.com
Mark Hoffman
[email protected]
Manufacturer and marketing of material
handling equipment for complete plants
and/or plant components.
Stephens Manufacturing . . . . . 1046
711 W. 4th St.
Tompkinsville, KY 42167
(800) 626-0200
(270) 487-2104 fax
www.stephensmfg.com
StructureWorks LLC . . . . . . . . 744
Greg High
2400 Apopka Blvd.
[email protected]
Apopka, FL 32703
Conveyors; Screws; Batchers; Installation;
Silos; Bins
Stone Strong Systems . . . . . . .662
3701 Union Drive
Suite 101
Lincoln, NE 68516
www.stonestrong.com
John Gran
. . . . . . . . . . . . . . . . . .732
(866) 491-5020
(615) 446-8188 fax
www.sumidenwire.com
Jeff Feitler
[email protected]
Strike Products . . . . . . . . . . .815
31785 64th Ave.
Cannon Falls, MN 55009
(507) 263-4129
Michael Banks
[email protected]
(281) 558-3000
Precast Bollards; Bollard Sleeves; Septic
Tank Posts; Light & Sign Pole Bases;
Poly Holeformers; Spacers; Wheels; I & I
Barriers
Sumiden Wire Products Corporation . Dickson, TN 37055
Houston, TX 77082
Municipal and Construction Castings
3D modeling, laser guided layout and
product management software specifically
for the precast industry.
710 Marshall Stuart Drive
www.striketool.com
[email protected]
[email protected]
The biggest, best and most innovative
precast block in the industry. Stone Strong
delivers fully and intelligently engineered
retaining wall solutions that greatly reduce
installation time and labor cost – with
unmatched durability and aesthetics.
4018 Westhollow Parkway
Vivek Sharma
Wayne Maiuri
[email protected]
(507) 263-4891 fax
www.starpipeproducts.com
www.structureworks.net
(402) 434-5652
Star Pipe Products . . . . . . . . . 218
(281) 558-9000 fax
(407) 367-2400
Manufacturer and distributor of PC strand,
epoxy-coated strand and prestressing
accessories and equipment. We have two
locations: Stockton, CA and Dickson, TN.
EXHIBITOR DIRECTORY
Summitville Tiles & Thin Brick . . 1151
15364 State Route 644
T
Summitville, OH 43962
Taylor Machine Works Inc. . . . . . 122
(330) 223-1511
650 N. Church Ave.
(330) 223-1414 fax
Louisville, MS 39339
www.summitville.com
(662) 773-3421
David Johnson
www.taylorbigred.com
[email protected]
Donnie Woodruff
Manufacturer of thin brick. Summitville Thin
Brick is precision-sized to meet the tight
tolerances needed for use in the precast
industry.
[email protected]
Superior Walls of America Ltd. . . 262
937 E. Earl Road
Taylor Machine Works, Inc. manufactures
a variety of pneumatic tire lift trucks.
We manufacture trucks with lift capacity
of 16,000 lbs. to 92,500 lbs. and larger
capacity trucks handling 100,000 lbs and
125,000 lbs. lift capabilities.
New Holland, PA 17557
(717) 208-2400
TEG Engineering LLC . . . . . . . 358
(717) 351-9263 fax
1505 44th St. S.W.
www.superiorwalls.com
Suite B
Marcus Blomeier
Wyoming, MI 49509
[email protected]
(616) 261-8630
Precast concrete wall system which
provides the highest quality, most green
and most efficient foundation products
(residential and light commercial) in the
world.
(616) 261-8631 fax
Sylvan Concrete Form Products . . . .
. . . . . . . . . . . . . . . . . .338
www.tegcivil.com
Guy C. Nelson
[email protected]
Engineering services related to the design
of precast structures and their foundations.
TEKA North America Inc. . . . . . .862
7400 S.W. Cherry Drive
4104 Holland Blvd.
Portland, OR 97223
Suite 105
(503) 639-9000
Chesapeake, VA 23323
(800) 842-1990 ttoll free
(757) 558-8846
(503) 608-3939 fax
(757) 558-8847 fax
www.sylvan-products.com/concrete
www.tekamixers.com
Scott Wilson
Mike Mueller
[email protected]
[email protected]
Since 1990, Sylvan provides national
supply of precast form systems, including
magnets, rail, chamfers (magnetic, steel,
plastic & wood), plastic reveals, formliners,
block-outs, sealants, gaskets, butyl supplies
and forming accessories.
TEKA manufacturers 4 types of concrete
mixers giving producers custom batching
solutions for their specific requirements.
BOOTH 338
EXHIBITOR DIRECTORY
Teksam . . . . . . . . . . . . . . . 885
THiN-Wall . . . . . . . . . . . . . .441
Topwerk Hess Group . . . . . . . .954
Hamborgvej 7
210 N. 13th St.
1262 Stone Church Road E.
Hanstholm, 7730 Denmark
Seward, NE 68434
Hamilton, ON L8W 2C8 Canada
45 97 96 19 33
(402) 646-6211
(905) 575-4440
45 97 96 24 24 fax
(402) 643-2149 fax
(905) 575-9466 fax
www.teksam.com
www.thin-wall.com
www.hessgroup.com
Bo Stenumgaard
Doug Gremel
Gudrun Hess
[email protected]
[email protected]
[email protected]
Teksam has been designing and building
high performance production equipment for
the dry-cast concrete industry for over 35
years from our headquarters in Denmark.
THiN-Wall is a composite action, structural
load bearing insulated wall panel system
without thermal penetrations, using less
concrete in an efficient production process.
Texaloy Foundry Company Inc. . . . .
TimeClock Plus . . . . . . . . . . .843
A leading manufacturer of equipment for a
wide range of demands, including concrete
pipe, manholes, culverts and various other
infrastructure concrete products. Providing
turnkey solutions from aggregate receipt
to product packaging. Hess and Prinzing
Pfeiffer, now part of the Topwerk Group,
stand for unsurpassed experience and
innovative technologies.
. . . . . . . . . . . . . . . . . .455
1 TimeClock Drive
710 4th St.
San Angelo, TX 76904
PO Box 37
(800) 749-8463
Floresville, TX 78114
www.timeclockplus.com
(830) 393-4066
Bryan Dorman
www.texaloy.com
[email protected]
Jack Rice
TimeClock Software, Time and Attendance,
TimeClocks
[email protected]
Texaloy manufactures ni-hard and urethane
replacement wear parts for concrete
mixers, concrete pipe machines, augers,
gunite and shotcrete along with industrial
castings like pumps and impellers.
Thermomass . . . . . . . . . . . .734
1000 Technology Drive
Boone, IA 50036
(515) 433-6075
(515) 433-6088 fax
www.thermomass.com
Brad Nesset
[email protected]
Thermomass manufactures a complete
line of insulation systems for use in
precast wall panels. With over 35 years of
experience, we are the industry leader in
concrete sandwich wall technology and can
help you create walls that maximize energyefficiency, durability and performance.
Titan II Precast Management System . . . . . . . . . . . . . . . . . . .670
303 W. Main St.
3rd Floor
Freehold, NJ 07728
(732) 866-8686
9627 Rowlett Drive
North Little Rock, AR 72113
(501) 812-0220
(501) 812-0770 fax
www.iskco.com
Ken Breeding
[email protected]
Precast Forms; Concrete Vibration
Equipment; Internal & External Vibrators;
High Frequency Vibrators
(732) 866-8654 fax
Transflo . . . . . . . . . . . . . . 1087
www.titaniisoftware.com
PO Box 4604
Magda Muka
South Bend, IN 46634
[email protected]
(574) 472-1095
Titan II Software
TLK Precision . . . . . . . . . . . .942
6224 W. 800 N.
Fountaintown, IN 46130
(317) 427-0123
(317) 427-0124 fax
www.tlkprecision.com
Steve Evans
[email protected]
Magnetic Components
Toyota Kohki/ISKCO . . . . . . . .348
(574) 288-4084 fax
www.trans-flo.com
Chris Blandford
[email protected]
Pneumatic material handling systems
designed specifically for concrete
producers. Complete pneumatic unloading
and transfer systems for cementitious
materials.
EXHIBITOR DIRECTORY
Trelleborg Pipe Seals Milford Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 806
250 Elm St.
PO Box 301
Milford, NH 03055
(603) 673-8680
(603) 673-7271 fax
www.trelleborg.com/npc
Simon Burke
[email protected]
Pipe-to-Manhole Connectors; Pipe
Gaskets; Butyl Sealants; Core Drills; Coring
Machines
Tricon Precast Ltd. . . . . . . . . . . . . . 960
BOOTH 734
15055 Henry Road
Houston, TX 77060
(281) 931-9832
(281) 931-0061 fax
www.triconprecast.com
Robert E. May
[email protected]
Tricon offers a wide range of Precast
Products: Precast Bridge Systems; Precast
Wall Systems including MSE Walls; Alfabloe
Walls; Precast Homes and many more.
Trimble . . . . . . . . . . . . . . . . . . . . . . 349
Trinic LLC . . . . . . . . . . . . . . . . . . . . 881
1075 Big Shanty Road N.W.
522 Cascade Valley Road
Tucker’s Machine & Steel Service Inc.
Kennesaw, GA 30144
Windsor, NY 13865
400 County Road 468
(770) 426-5105
(800) 475-1975
Leesburg, FL 34748
www.tekla.com/us
www.trinic.us
(352) 787-3157
Kristine Plemmons
Bob Chatterton
(352) 365-1732 fax
[email protected]
[email protected]
www.tuckerbilt.com
Trimble is dedicated to transforming
the planning, design, construction and
operation of buildings through advanced,
accessible, intuitive technologies. Tekla
software is one of those technologies
that boosts the entire precast workflow
from bidding to delivery. You can detail all
kinds of structures, manage production,
plan erection and find potential problems
early before production starts. Win
more profitable bids with Trimble’s Tekla
Software!
Trinic LLC manufactures the next
generation of powdered admixes for the
production of UHP concrete and glass
fiber reinforced concrete serving the
architectural precast markets.
Don Galbreath
. . . . . . . . . . . . . . . . . . . . . . . . . . 412
[email protected]
Tuckerbilt T-644; Custom Forms; Custom
Engineered Hauling & Lifting Solutions
Tuf-Tite Inc. . . . . . . . . . . . . . . . . . . . 801
1200 Flex Court
Lake Zurich, IL 60047
(847) 550-1011
(847) 550-8004 fax
www.tuf-tite.com
Harry Plander
[email protected]
Drainage, Septic and ADA Tactile Products
EXHIBITOR DIRECTORY
U
Universal Polymer & Rubber . . . 374
VanHooseCo Precast . . . . . . . .161
15730 S. Madison Road
244 Blair Bend Drive
Ultra-Span/Progress Group . . . .462
Middlefield, OH 44062
Loudon, TN 37774
165 Fennell St.
(330) 612-0285
(865) 458-3998
Winnipeg, MB R3T 0M6 Canada
www.universalpolymer.com
www.vanhooseco.com
(204) 992-3200
Joe Derico
Don Atkins
(204) 992-3209 fax
[email protected]
[email protected]
www.ultraspan.ca
Universal Polymer & Rubber has full
rubber gasket support based on customer
drawings for concrete pipe, manholes, box
culverts, pipe lube and other molded and
extruded products.
VANHOOSECO Precast manufactures
various utility products including manholes,
vaults, catch basins, pumping stations, box
culvert, three sided culvert, and in ground
detention structures. We also manufacture
precast walls, columns, beams, and other
miscellaneous specialty precast items.
[email protected]
Ultra-Span Technologies Inc., a member
of the PROGRESS GROUP, is a leading
manufacturer of Hollowcore Extrusion
machinery and ancillary equipment for the
precast/prestressed concrete industry.
At Ultra-Span, our mission is to deliver
the highest return on investment for
Hollowcore producers by providing superior
technology through continued innovation,
while ensuring our customers’ experience
is of the utmost.
Underground Devices Inc. . . . . .837
420 Academy Drive
US Formliner . . . . . . . . . . . .351
370 Commerce Blvd.
Athens, GA 30606
(706) 549-6787
(706) 355-1991 fax
www.usformliner.com
Ray Clark
[email protected]
Concrete Stains and Formliners
(847) 205-9004 fax
V
www.udevices.com
Vacuworx . . . . . . . . . . . . . 1168
Chris Greene
10105 E. 55th Place
[email protected]
Tulsa, OK 74146
Nonmetallic Cable Supports for
underground power and communication
manholes and vaults.
(918) 259-3050
United Employment Group CONCRETEJOBS.COM . . . . 1012
840 W. Hamilton St.
Suite 420
Allentown, PA 18101
(610) 351-8070
(610) 351-8071 fax
www.unitedemploymentgroup.com
Michael S. Stauffer
[email protected]
UEG specializing in the recruitment
and placement of industry experience
candidates to the Precast/Prestressed
Concrete Industry and Suppliers.
16500 S. 500 W.
Bluffdale, UT 84065
(801) 571-2028
(801) 880-3650 fax
www.verti-crete.com
Mike Sharp
[email protected]
Northbrook, IL 60062
(847) 205-9000
Verti-Crete LLC . . . . . . . . . . 1061
(918) 259-3055 fax
www.vacuworx.com
Randy Hayes
[email protected]
Vacuworx is the global leader in innovative
solutions for the oil, water, sewer, utility
and road construction industries. Lift faster,
safer and smarter with Vacuworx.
Molds & Form Liners for Precast Concrete;
Precast Fence Form Systems; Retaining
Block Forms and Formliners; Precast Sound
Wall Systems
Voeller Mixers Inc. . . . . . . . . .900
455 N. Moore Road
Port Washington, WI 53074
(262) 284-3114
(262) 284-3116 fax
www.voellermixers.com
Joe Fisher
[email protected]
Voeller Mixers is an American manufacturer
of concrete mixing systems, including
batch plants, pan mixers, planetary
(countercurrent) mixers, automated
batching control systems, automated mixer
cleaning systems, microwave moisture
compensation technology, and aggregate
heating systems to the concrete pipe,
block, paving, precast, and prestressed
industries.
EXHIBITOR DIRECTORY
BOOTH 122
Voss Engineering Inc. . . . . . . . 655
6965 N. Hamlin Ave.
W
Lincolnwood, IL 60712
W.P. Hilts & Company . . . . . . . . . . 654
(847) 673-8900
4131 Brandon Ave. S.W.
(800) 323-3935 ttoll free
Roanoke, VA 24018
(847) 673-1408 fax
(540) 989-1281
www.vossengineering.com
(540) 989-1285 fax
Doug Martin
www.wphilts.com
[email protected]
Thomas E. Hilts
Voss Engineering, Inc. provides expansion/
slide bearing assemblies, bearing pads,
and isolation materials for highway
bridges, industrial structures, machines,
process piping, and commercial buildings.
Voss’ product line includes the following
structural bearing pad materials: SOBRTEX
(preformed fabric pad/cotton duck pad/
CDP), VSB Slide Bearings (PTFE and
steel plate), VTB (thermal break pad),
NEOSORB [AASHTO grade neoprene
(polychloroprene)], and FIBERLAST or
VOSSCO (random oriented fiber pads)
[email protected]
H-STAR MIXER Planetary Mixer;
manufacturers of CONCRETE Batch
Plants (Precast, Prestressed, Pipe, Block
and Ready Mix); RETROFIT of Plants;
Plant COMPONENTS for Entire Plant;
Dust Collection Systems; SOLARTRONIX
Batching Automation; Twin Shaft Mixers;
Parts for all makes & models of Batch Plant
Equipment; WAM Products including Dust
Collectors, Screw Conveyors and Butterfly
Valves; BADGER Water Meters; HYDRONIX
Moisture Controls for both Bins & Mixers,
Installation Services and much, much more.
Wall-Ties & Forms Inc. . . . . . . 1185
4000 Bonner Industrial Drive
Shawnee, KS 66226
(913) 441-0073
(913) 441-0076 fax
www.wallties.com
Matthew Bray
[email protected]
Aluminum Concrete Forms for Precast
Products
Water Treatment Solutions . . . . 384
6 Merrill Industrial Drive
Hampton, NH 03842
(603) 758-1900
(603) 758-1999 fax
www.watertreatmentonline.com
Ross Perry
[email protected]
Reclaim, Rebatch, Recycle – Water
Recycling Systems for all size operations.
EXHIBITOR DIRECTORY
Watsontown Brick Co. . . . . . . 1085
Western Forms . . . . . . . . . . .849
Wooster Products Inc. . . . . . . 1048
86 Portmay Road
6200 Equitable Road
1000 Spruce St.
Watsontown, PA 17777
Kansas City, MO 64120
Wooster, OH 44691
(570) 538-2555
(816) 777-3956
(800) 321-4936
(570) 538-5903 fax
(816) 241-9450 fax
(330) 262-4151 fax
www.watsontownbrick.com
www.westernforms.com
www.wooster-products.com
Steve Barnhardt
Jim Aylward
Tim Brennan
[email protected]
[email protected]
American made premium aluminum
forming solutions for precast box work,
including box culverts, utility vaults, inlets,
septic tanks, grease interceptors, and
various custom structures.
[email protected]
Clay Thin Brick – Various Sizes, PCI
compliant
Wausau Tile Inc. . . . . . . . . . . 435
PO Box 1520
Wausau, WI 54402-1520
(800) 388-8728
(715) 355-4627 fax
www.wausautile.com
Jordan Zollpriester
[email protected]
Manufacturer or custom precast concrete
products. In-house designers will provide
technical assistance. Entire process from
molds to manufacturing is completed in
Wausau, WI.
Wire Mesh Corp. . . . . . . . . . .584
USA manufacturers of anti-slip safety stairs
and walkway products including Nosings
for precast.
X
25511 Budde Road
Xypex Chemical Corporation . . . 1058
Suite 202
13731 Mayfield Place
The Woodlands, TX 77380
Richmond, BC V6V 2G9 Canada
(518) 727-7400
(604) 273-5265
www.wmc-us.com
(604) 270-0451 fax
Bob Vitullo
www.xypex.com
[email protected]
Paul Derby
Engineered Structural Mesh
[email protected]
Xypex Chemical Corporation is a leading
manufacturer of high quality products for
the waterproofing, protection and repair of
concrete.
2017
Cleveland Convention Center I Cleveland, OH I March 2 – 4, 2017
© Rudi1976 | Dreamstime.com
SEE YOU AT
BUYER’S GUIDE
BOOTH 654
Proud Sponsor of the NPCA Master Precaster Alumni Bash!
BOOTH 604
BUYER’S GUIDE
BOOTH 436
BUYER’S GUIDE
THE PRECAST SHOW
BUYER’S GUIDE
The Precast Show Buyer’s Guide provides a comprehensive listing of the equipment, products and services offered by our exhibitors.
The listing is categorized by specific product lines within the main product categories displayed in the Table of Contents.
For more information on an exhibitor, please check our Exhibitor Directory, starting on page 52. Exhibitor listings and links to exhibitor
websites are also available at ThePrecastShow.org.
PRECAST SUPPLIES
Admixtures - Chemical
Admixtures – Chemical............. 100
Admixtures – Mineral.................101
Batching Equipment...................101
Chemicals................................... 103
Concrete Accessories................ 104
Concrete - Raw Materials.......... 107
Delivery Equipment................... 107
Forms/Molds.............................. 108
Franchisor/Licensor of Product
Systems...................................110
Gaskets/Sealers..........................110
Hollow Core Equipment.............110
Management Tools & Other
Services................................... 111
Material Handling.......................112
Plant Equipment.........................113
Reinforcement.............................117
Safety Equipment.......................118
Systems.......................................118
Testing Services..........................118
Veneer..........................................118
BASF Corporation.......................................436
CHRYSO Inc...............................................681
Euclid Chemical Co.....................................665
GCP Applied Technologies.......................... 154
MAPEI/GRT.............................................. 1202
Smooth-On Inc......................................... 1060
PRECAST PRODUCTS
ASR Preventive Admixures
CHRYSO Inc...............................................681
Sika Corporation.........................................530
Trinic LLC....................................................881
Agricultural Products..................118
Building and Site Amenities......118
Hazardous Materials Containment.
.................................................119
Marine Products..........................119
Modular Paving...........................119
Prestressed/Structural Products....119
Retaining Walls............................119
Sanitary & Stormwater Products.... .................................................119
Transportation Products............ 120
Utility Structures........................ 120
Water & Wastewater Products........ ................................................ 120
Accelerating Admixtures
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
RoMix Inc...................................................379
Trinic LLC....................................................881
Air Entraining Admixtures
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
RoMix Inc...................................................379
Corrosion Inhibiting Admixtures
CHRYSO Inc...............................................681
Concrete Sealants Inc................................. 418
ConShield Technologies..............................679
MAPEI/GRT.............................................. 1202
Xypex Chemical Corporation.................... 1058
Integral Water Repellent Admixtures
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
Trinic LLC....................................................881
MIC Protection
Set Retarding Admixtures
CHRYSO Inc...............................................681
Fister Inc.....................................................724
MAPEI/GRT.............................................. 1202
RoMix Inc...................................................379
Superplasticizing Admixtures
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
RoMix Inc...................................................379
Trinic LLC....................................................881
Viscosity Modifying Admixtures
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
Trinic LLC....................................................881
BUYER’S GUIDE
Water Reducing Admixtures
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
RoMix Inc...................................................379
Trinic LLC....................................................881
Other Admixtures - Chemical
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
Smooth-On Inc......................................... 1060
Trinic LLC....................................................881
Admixtures - Mineral
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
Ground Granulated Blast Furnace Slag
Essroc Italcementi Group......................... 1219
Metakaolin
Other Admixtures - Mineral
Buzzi Unicem USA......................................220
CHRYSO Inc...............................................681
Batching Equipment
Advanced Concrete Technologies Inc.........454
Besser Company........................................306
BMH Systems............................................869
Columbia Machine Inc.............................. 1083
Concrete Batch Solutions......................... 1149
Elematic Inc................................................842
ERMC......................................................... 616
Haarup North America Inc.......................... 116
Hydronix Ltd...............................................572
Industrial Services International ISI LLC.....445
Jonel Engineering.......................................564
Liebherr Concrete Technology Co...............230
MCT Group Inc......................................... 1038
Mixer Systems Inc...................................... 318
Robert Ober & Associates LLC...................836
Scale-Tron Inc........................................... 1032
SLAB Innovation Inc................................... 166
Standley Batch Systems Inc....................... 814
Texaloy Foundry Company Inc....................455
Transflo..................................................... 1087
Aggregate/Water Heating & Concrete
Curing
Skako Concrete Inc.....................................848
Batch Plants
Besser Company........................................306
BHS-Sonthofen Inc.....................................371
BMH Systems............................................869
Cemen Tech Inc........................................ 1167
Cleco Manufacturing.................................. 712
Del Zotto Products of Florida Inc................ 740
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
J. McCoy Equipment Ltd............................278
MCT Group Inc......................................... 1038
Pathfinder Systems....................................646
ProAll........................................................ 1218
Scale-Tron Inc........................................... 1032
SIMEM America Corp.................................479
Stephens Manufacturing.......................... 1046
Strong Products LLC..................................906
Topwerk Hess Group..................................954
Voeller Mixers Inc.......................................900
W.P. Hilts & Company.................................654
Batching/Mixing Controls
Besser Company........................................306
BMH Systems............................................869
Command Alkon.........................................647
Egan Company......................................... 1008
Elematic Inc................................................842
ERMC......................................................... 616
Hydronix Ltd...............................................572
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
MPAQ Automation Inc................................867
Ohio Electric Control Inc............................. 159
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Batchwater Heating & Cooling
American Geothermal Inc...........................669
BMH Systems............................................869
Computer Hardware/Software (Mix Design
and Batching)
BMH Systems............................................869
Command Alkon.........................................647
Egan Company......................................... 1008
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Conveyors
Automacad Inc............................................558
Besser Company........................................306
Bi-State Rubber..........................................365
BMH Systems............................................869
ClearSpan Fabric Structures.......................754
BUYER’S GUIDE
Elematic Inc................................................842
ERMC......................................................... 616
HawkeyePedershaab..................................624
iwi group LLC.............................................424
LAP Laser LLC............................................582
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Fiber Doser
Scale-Tron Inc........................................... 1032
Mixer Liners
Besser Company........................................306
BMH Systems............................................869
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
Sicoma North America Inc..........................936
TEKA North America Inc.............................862
W.P. Hilts & Company.................................654
Mixers/Pans
Besser Company........................................306
BMH Systems............................................869
Elematic Inc................................................842
ERMC......................................................... 616
EZG Manufacturing....................................1173
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Mobile Batching Plants
Besser Company........................................306
BMH Systems............................................869
Cemen Tech Inc........................................ 1167
ProAll........................................................ 1218
Scale-Tron Inc........................................... 1032
Planetary Mixers
BMH Systems............................................869
Elematic Inc................................................842
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Silica Fume
CHRYSO Inc...............................................681
MAPEI/GRT.............................................. 1202
Trinic LLC....................................................881
Twin Shaft Mixers
BMH Systems............................................869
Elematic Inc................................................842
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Other Batching Equipment
Bekaert Corp...............................................270
Besser Company........................................306
BMH Systems............................................869
Cemen Tech Inc........................................ 1167
Elematic Inc................................................842
ERMC......................................................... 616
Hydronix Ltd...............................................572
iwi group LLC.............................................424
Martin Engineering.....................................331
MCT Group Inc......................................... 1038
ProAll........................................................ 1218
Scale-Tron Inc........................................... 1032
BUYER’S GUIDE
Sioux Corporation....................................... 313
Transflo..................................................... 1087
W.P. Hilts & Company.................................654
Other Mixer Products
Besser Company........................................306
BMH Systems............................................869
Cemen Tech Inc........................................ 1167
Elematic Inc................................................842
Hydronix Ltd...............................................572
MCT Group Inc......................................... 1038
ProAll........................................................ 1218
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Used Batching Equipment
BMH Systems............................................869
Cemen Tech Inc........................................ 1167
iwi group LLC.............................................424
ProAll........................................................ 1218
Chemicals
A.L. Patterson Inc.......................................856
Cresset Chemical Company.......................325
Dayton Superior Corporation......................657
MAPEI/GRT.............................................. 1202
Press-Seal Corporation............................... 312
Smooth-On Inc......................................... 1060
Cleaning Agents
A.L. Patterson Inc.......................................856
A-Lok Products Inc.....................................536
CHRYSO Inc...............................................681
Durajoint Concrete Accessories............... 1181
Eaco Chem............................................... 1204
Franmar Chemical Inc................................. 212
MorOil Technologies................................... 413
Nox-Crete Products Group.......................... 162
RoMix Inc...................................................379
Coatings
A.L. Patterson Inc.......................................856
Chemline Inc...............................................568
CHRYSO Inc...............................................681
ErgonArmor Inc..........................................778
Fister Inc.....................................................724
Henry Company..........................................821
Hill and Griffith Co.......................................678
Isotec International.....................................873
Midspec Inc................................................685
PAVE TECH Inc. & PROBST GmbH........... 1054
RoMix Inc...................................................379
SealGuard Inc........................................... 1034
Trinic LLC....................................................881
Concrete Stains & Pigments
Architectural Polymers................................833
Custom Rock Formliner.............................. 764
Trinic LLC....................................................881
Verti-Crete LLC......................................... 1061
Construction Chemicals
A.L. Patterson Inc.......................................856
CHRYSO Inc...............................................681
Eaco Chem............................................... 1204
Fister Inc.....................................................724
MAPEI/GRT.............................................. 1202
RoMix Inc...................................................379
SealGuard Inc........................................... 1034
Curing Compounds
Dust Control Products
CHRYSO Inc...............................................681
Lubricants
Hamilton Kent............................................. 748
J-K Polysource Inc......................................443
M.A. Industries Inc.....................................825
Polylok Inc...................................................404
RoMix Inc...................................................379
Pigments
E & A Supply Corp......................................345
Fister Inc.....................................................724
Release Agents
A.L. Patterson Inc.......................................856
Armcon Molds USA LLC............................266
Automacad Inc............................................558
BN Products - USA................................... 1201
CHRYSO Inc...............................................681
ErgonArmor Inc..........................................778
Fister Inc.....................................................724
Franmar Chemical Inc................................. 212
Meadow Burke...........................................636
Midspec Inc................................................685
Prestress Supply Inc................................... 718
RoMix Inc...................................................379
Smooth-On Inc......................................... 1060
BUYER’S GUIDE
US Formliner...............................................351
Western Forms...........................................849
Rust Preventive Chemicals
A.L. Patterson Inc.......................................856
Fister Inc.....................................................724
Midspec Inc................................................685
RoMix Inc...................................................379
Sealants
A.L. Patterson Inc.......................................856
B.T. innovation GmbH.................................340
Chemline Inc...............................................568
ErgonArmor Inc..........................................778
Henry Company..........................................821
Midspec Inc................................................685
Polylok Inc...................................................404
RoMix Inc...................................................379
SealGuard Inc........................................... 1034
Strike Products........................................... 815
Trinic LLC....................................................881
Waterproofing
Chemline Inc...............................................568
Other Chemicals
A.L. Patterson Inc.......................................856
Chemline Inc...............................................568
Eaco Chem............................................... 1204
Fister Inc.....................................................724
Jet Inc......................................................... 762
Meadow Burke...........................................636
Norweco Inc...............................................346
RoMix Inc...................................................379
SealGuard Inc........................................... 1034
Concrete Accessories
A.L. Patterson Inc.......................................856
Agru America Inc........................................ 315
B.S. Italia.....................................................831
Blackthorn LLC...........................................354
C.V. International Plastics Inc......................370
CONAC, Concrete Accessories..................800
Elematic Inc................................................842
Essve Tech Inc............................................556
High Concrete Accessories........................330
Inwesco Inc................................................878
Landcon/Starcon Lifting Anchors................845
Meadow Burke...........................................636
Smooth-On Inc......................................... 1060
Adjustment Risers and Extensions
BFS Betonfertigteilesysteme GmbH..........309
D & L Supply Co. Inc..................................232
EJ ..............................................................442
Epic Polymer Systems.............................. 1216
Hamilton Kent............................................. 748
Neenah Foundry Co.................................... 912
Polylok Inc...................................................404
SIGMA Corp...............................................756
SIP Industries/Serampore......................... 1084
Star Pipe Products...................................... 218
Aluminum Doors
Eagle Manufacturing Group/U.S.F. Fabrication
Inc. & U.S. Foundry & Mfg. Corp.......... 610
EJ ..............................................................442
Inwesco Inc................................................878
Pennsylvania Insert Corp............................ 317
Anchors/Fasteners
A.L. Patterson Inc.......................................856
American Step Co. Inc................................544
Associated Spring RAYMOND....................459
B.S. Italia.....................................................831
Blackthorn LLC...........................................354
BN Products - USA................................... 1201
Haala Industries Inc....................................883
Inwesco Inc................................................878
iwi group LLC.............................................424
King Hughes Fasteners..............................248
Meadow Burke...........................................636
Midspec Inc................................................685
Oxford Industrial Technologies....................487
Pentair.......................................................1074
Precision-Hayes International.....................341
Schlusselbauer North America LLC............924
Bonding
CMC/MMI...................................................861
Meadow Burke...........................................636
Midspec Inc................................................685
SealGuard Inc........................................... 1034
Brick Embed Systems
Advanced Formliners LLC......................... 1066
Innovative Brick Systems LLC.................. 1166
Cable Racks
Inwesco Inc................................................878
Underground Devices Inc...........................837
Drop Anchors
A.L. Patterson Inc.......................................856
BN Products - USA................................... 1201
CCS/SureBuilt Manufacturing................... 1081
CMC/MMI...................................................861
Meadow Burke...........................................636
Duct Terminators
BUYER’S GUIDE
Meadow Burke...........................................636
Effluent Filters
Clearstream Wastewater Systems Inc.......378
Jet Inc......................................................... 762
Norweco Inc...............................................346
Tuf-Tite Inc.................................................. 801
Effluent Pumps
Jet Inc......................................................... 762
Norweco Inc...............................................346
Epoxy-Coated Products
A.L. Patterson Inc.......................................856
Chemline Inc...............................................568
CMC/MMI...................................................861
Laurel Steel.................................................542
Meadow Burke...........................................636
Metal Partners International..................... 1212
Pentair.......................................................1074
solidian GmbH............................................580
Fiberglass Products
Blackthorn LLC...........................................354
Formcrete Fiberglass Products Inc........... 1079
GCI Pipe Products Inc................................. 415
Icon X LLC................................................ 1086
International GRC Association (GRCA).......375
Meadow Burke...........................................636
solidian GmbH............................................580
Thermomass...............................................734
Foundation Anchors
B.S. Italia.....................................................831
CMC/MMI...................................................861
LAP Laser LLC............................................582
Pentair.......................................................1074
Polylok Inc...................................................404
Frames & Grates
D & L Supply Co. Inc..................................232
EJ ..............................................................442
Hamilton Kent............................................. 748
Inwesco Inc................................................878
Polylok Inc...................................................404
SIGMA Corp...............................................756
Frames & Grates - Adjustment Riser Rings
D & L Supply Co. Inc..................................232
EJ ..............................................................442
Hamilton Kent............................................. 748
Laurel Steel.................................................542
SIGMA Corp...............................................756
Inserts
A.L. Patterson Inc.......................................856
B.S. Italia.....................................................831
Bianchi Casseforme S.r.l........................... 1042
CMC/MMI...................................................861
Essve Tech Inc............................................556
Hamilton Kent............................................. 748
Icon X LLC................................................ 1086
JVI Inc.........................................................630
Meadow Burke...........................................636
Midspec Inc................................................685
Polylok Inc...................................................404
Wooster Products Inc............................... 1048
Insulation
A.L. Patterson Inc.......................................856
CMC/MMI...................................................861
Icon X LLC................................................ 1086
iwi group LLC.............................................424
Precise Forms Inc.......................................478
Thermomass...............................................734
Liners
A.L. Patterson Inc.......................................856
AFTEC LLC................................................. 172
Agru America Inc........................................ 315
Ameron Protective Linings.........................334
BMH Systems............................................869
CMC/MMI...................................................861
Fitzgerald Formliners..................................264
Smooth-On Inc......................................... 1060
Strike Products........................................... 815
Sylvan Concrete Form Products.................338
US Formliner...............................................351
Verti-Crete LLC......................................... 1061
Magnets
A.L. Patterson Inc.......................................856
CMC/MMI...................................................861
Elematic Inc................................................842
Fister Inc.....................................................724
JVI Inc.........................................................630
Marks Metal Technology.............................847
Meadow Burke...........................................636
Polylok Inc...................................................404
Ratec LLC...................................................649
Spillman Company......................................604
Strike Products........................................... 815
TLK Precision..............................................942
BUYER’S GUIDE
Manhole/Pipe Liners
Agru America Inc........................................ 315
Strike Products........................................... 815
Trelleborg Pipe Seals Milford Inc................806
Manhole Rings and Covers
CMC/MMI...................................................861
D & L Supply Co. Inc..................................232
EJ ..............................................................442
Hamilton Kent............................................. 748
Inwesco Inc................................................878
Laurel Steel.................................................542
SIGMA Corp...............................................756
Manhole Steps
A.L. Patterson Inc.......................................856
D & L Supply Co. Inc..................................232
Inwesco Inc................................................878
Lane International Corp............................ 1055
Meadow Burke...........................................636
Western Forms...........................................849
Membranes
Chemline Inc...............................................568
CMC/MMI...................................................861
Panel Pads
A.L. Patterson Inc.......................................856
Blackthorn LLC...........................................354
CMC/MMI...................................................861
Fister Inc.....................................................724
JVI Inc.........................................................630
Meadow Burke...........................................636
Midspec Inc................................................685
Paragon Products.......................................984
Polylok Inc...................................................404
Patching & Repair
A.L. Patterson Inc.......................................856
Chemline Inc...............................................568
CMC/MMI...................................................861
Meadow Burke...........................................636
Midspec Inc................................................685
SealGuard Inc........................................... 1034
Prestress Hardware & Accessories
CCL Spiroll..................................................661
Pulling Irons
A.L. Patterson Inc.......................................856
CMC/MMI...................................................861
Inwesco Inc................................................878
Meadow Burke...........................................636
Infiltrator Water Technologies......................780
Jet Inc......................................................... 762
Meadow Burke...........................................636
Norweco Inc...............................................346
Polylok Inc...................................................404
SealGuard Inc........................................... 1034
Tuf-Tite Inc.................................................. 801
Shims
A.L. Patterson Inc.......................................856
Blackthorn LLC...........................................354
CMC/MMI...................................................861
Fister Inc.....................................................724
JVI Inc.........................................................630
Meadow Burke...........................................636
Midspec Inc................................................685
Polylok Inc...................................................404
Rebar Ties/Clips Tools
A.L. Patterson Inc.......................................856
AIRMATIC Inc.............................................948
CMC/MMI...................................................861
Duchesne et Fils Ltee............................... 1183
iwi group LLC.............................................424
Max USA Corp............................................ 147
Midspec Inc................................................685
Security Devices
Automacad Inc............................................558
Septic Tank Accessories
Spacers - Concrete
CMC/MMI...................................................861
Meadow Burke...........................................636
Molenaar North America Inc.......................875
Spacers - Metal
A.L. Patterson Inc.......................................856
Blackthorn LLC...........................................354
CMC/MMI...................................................861
Fister Inc.....................................................724
iwi group LLC.............................................424
BUYER’S GUIDE
Meadow Burke...........................................636
Midspec Inc................................................685
Strike Products........................................... 815
Spacers - Plastic
A.L. Patterson Inc.......................................856
Blackthorn LLC...........................................354
CMC/MMI...................................................861
Diamondback Spacers LLC.........................485
Fister Inc.....................................................724
iwi group LLC.............................................424
Meadow Burke...........................................636
Midspec Inc................................................685
Polylok Inc...................................................404
Strike Products........................................... 815
Structural Beam Supports/Components
B.S. Italia.....................................................831
Polylok Inc...................................................404
Scougal Rubber Corp..................................772
Voss Engineering Inc..................................655
Structural Load Bearings
CMC/MMI...................................................861
D & L Supply Co. Inc..................................232
ELE International........................................ 319
Essve Tech Inc............................................556
Inwesco Inc................................................878
JVI Inc.........................................................630
King Hughes Fasteners..............................248
Latux Diamond Blades................................687
Meadow Burke...........................................636
Polylok Inc...................................................404
Strike Products........................................... 815
Tuf-Tite Inc.................................................. 801
Wooster Products Inc............................... 1048
Concrete - Raw Materials
Aggregates - Manufactured
Wear Castings
Besser Company........................................306
BMH Systems............................................869
D & L Supply Co. Inc..................................232
Aggregates - Natural
Fister Inc.....................................................724
Other Concrete Accessories
A.L. Patterson Inc.......................................856
Agru America Inc........................................ 315
Blackthorn LLC...........................................354
Lightweight Aggregates - Manufactured
Stalite......................................................... 274
Cement
Buzzi Unicem USA......................................220
Lightweight Aggregates - Natural
Fister Inc.....................................................724
Other Concrete Raw Materials
Power Adhesives........................................865
Delivery Equipment
BIK Hydraulics Ltd.....................................1014
Elematic Inc................................................842
Hiab USA Inc.............................................. 132
QMC Hydraulic Cranes............................. 1205
Rigging Equipment
Blackthorn LLC...........................................354
Hoist Liftruck Mfg. Inc................................ 918
Midspec Inc................................................685
Trailers
ERMC......................................................... 616
Trailer Mounted Cranes
Fascan International.................................... 401
Hiab USA Inc.............................................. 132
Truck Mounted Cranes
Hiab USA Inc.............................................. 132
Palfinger North America..............................468
Smith Truck Cranes & Equipment Co.........1178
Trucks
Other Delivery Equipment
Elematic Inc................................................842
Hiab USA Inc.............................................. 132
Tucker’s Machine & Steel Service Inc......... 412
BUYER’S GUIDE
Used Delivery Equipment
Hiab USA Inc.............................................. 132
iwi group LLC.............................................424
Forms/Molds
A.L. Patterson Inc.......................................856
Accella Performance Materials...................347
Elematic Inc................................................842
Essve Tech Inc............................................556
Helser Industries........................................730
LondonBoulder...........................................437
MOLDTECH.............................................. 1056
Norwalk Precast Molds..............................344
Polytek Development Corp.........................879
ReCon Wall Systems Inc.............................222
Smooth-On Inc......................................... 1060
Stone Strong Systems................................662
Toyota Kohki/ISKCO....................................348
Ultra-Span/Progress Group.........................462
Wall-Ties & Forms Inc............................... 1185
Western Forms...........................................849
Architectural Form Liners
A.L. Patterson Inc.......................................856
Agru America Inc........................................ 315
Chemline Inc...............................................568
CMC/MMI...................................................861
Fast Formliners Co.....................................1010
Spec Formliners Inc....................................380
US Formliner...............................................351
Chamfer Strips
Besser Company........................................306
CMC/MMI...................................................861
Hamilton Form Company............................430
Loveday Lumber Company.........................859
Ratec LLC...................................................649
Custom Forms
A.L. Patterson Inc.......................................856
AFTEC LLC................................................. 172
Automacad Inc............................................558
Besser Company........................................306
Blackthorn LLC...........................................354
Coote Engineering Ltd.............................. 1044
Eden Technology s.r.l..................................238
Elematic Inc................................................842
ERMC......................................................... 616
Greenwood Plastics dba Trigard..................321
iwi group LLC.............................................424
LondonBoulder...........................................437
MOLDTECH.............................................. 1056
New Hampton Metal Fab...........................706
Polylok Inc...................................................404
Power Adhesives........................................865
Ratec LLC...................................................649
Redi-Rock....................................................546
Rosetta Hardscapes....................................562
Smooth-On Inc......................................... 1060
SOMMER Anlagentechnik GmbH.............. 819
Strike Products........................................... 815
Superior Walls of America Ltd....................262
Teksam.......................................................885
Verti-Crete LLC......................................... 1061
Western Forms...........................................849
Dry-Cast Forms
Besser Company........................................306
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
MOLDTECH.............................................. 1056
Strike Products........................................... 815
Teksam.......................................................885
Formliners
A.L. Patterson Inc.......................................856
AFTEC LLC................................................. 172
Chemline Inc...............................................568
CMC/MMI...................................................861
Fitzgerald Formliners..................................264
LondonBoulder...........................................437
Power Adhesives........................................865
Smooth-On Inc......................................... 1060
US Formliner...............................................351
Verti-Crete LLC......................................... 1061
Forms/Molds Accessories
Besser Company........................................306
BUYER’S GUIDE
Essve Tech Inc............................................556
Hamilton Kent............................................. 748
LondonBoulder...........................................437
Meadow Burke...........................................636
MOLDTECH.............................................. 1056
Polylok Inc...................................................404
Ratec LLC...................................................649
Hole Formers
A.L. Patterson Inc.......................................856
Besser Company........................................306
Blackthorn LLC...........................................354
Elematic Inc................................................842
Essve Tech Inc............................................556
Polylok Inc...................................................404
Strike Products........................................... 815
Magnet Chamfers
CMC/MMI...................................................861
Ratec LLC...................................................649
Ornamental Rubber Molds
Smooth-On Inc......................................... 1060
US Formliner...............................................351
Overlay Form Plywood
Retarder Paper
Reveal Strips
CMC/MMI...................................................861
Loveday Lumber Company.........................859
Ratec LLC...................................................649
Wet-Cast Forms
AFTEC LLC................................................. 172
Automacad Inc............................................558
Besser Company........................................306
Blackthorn LLC...........................................354
CSI/Universal Wall Systems........................782
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
LondonBoulder...........................................437
MOLDTECH.............................................. 1056
Norweco Inc...............................................346
Paolo Nanfito Industrial Machine SL......... 1057
Power Adhesives........................................865
Ratec LLC...................................................649
Redi-Rock....................................................546
Strike Products........................................... 815
Verti-Crete LLC......................................... 1061
Western Forms...........................................849
Other Forms/Molds
Besser Company........................................306
Essve Tech Inc............................................556
LondonBoulder...........................................437
MOLDTECH.............................................. 1056
Ratec LLC...................................................649
Verti-Crete LLC......................................... 1061
Used Forms/Molds
iwi group LLC.............................................424
Polylok Inc...................................................404
Ratec LLC...................................................649
Western Forms...........................................849
BUYER’S GUIDE
Franchisor/Licensor of
Product Systems
AFTEC LLC................................................. 172
Earth Wall Products....................................770
Easi-Set Worldwide.....................................822
Norweco Inc...............................................346
Redi-Rock....................................................546
Retaining Wall Systems
AFTEC LLC................................................. 172
ERMC......................................................... 616
Ratec LLC...................................................649
Redi-Rock....................................................546
Verti-Crete LLC......................................... 1061
Storm Safe Rooms
Helix Steel..................................................738
Ratec LLC...................................................649
Western Forms...........................................849
Structural Wall Panels
Ratec LLC...................................................649
THiN-Wall....................................................441
Gaskets/Sealers
Blackthorn LLC...........................................354
Henry Company..........................................821
Mar Mac Construction Products Inc...........554
Universal Polymer & Rubber....................... 374
External Joint Wrap
ErgonArmor Inc..........................................778
Henry Company..........................................821
SIGMA Corp...............................................756
External Sealing Bands
Blackthorn LLC...........................................354
ErgonArmor Inc..........................................778
SealGuard Inc........................................... 1034
Gaskets
Blackthorn LLC...........................................354
ErgonArmor Inc..........................................778
Hamilton Kent............................................. 748
Polylok Inc...................................................404
Tuf-Tite Inc.................................................. 801
Elematic Inc................................................842
SPANCRETE...............................................700
Pipe-to-Manhole Connectors
Blackthorn LLC...........................................354
Hamilton Kent............................................. 748
Preformed Joint Materials (Sealers)
Blackthorn LLC...........................................354
ErgonArmor Inc..........................................778
Hamilton Kent............................................. 748
Henry Company..........................................821
Polylok Inc...................................................404
Other Gaskets/Sealers
Blackthorn LLC...........................................354
ErgonArmor Inc..........................................778
Hamilton Kent............................................. 748
Henry Company..........................................821
Hollow Core Equipment
Hollow Core Extruder
CCL Spiroll..................................................661
Elematic Inc................................................842
Nordimpianti System SRL........................ 1036
Hollow Core Lifting Devices
CCL Spiroll..................................................661
Elematic Inc................................................842
Hollow Core Pallets
CCL Spiroll..................................................661
Elematic Inc................................................842
Hollow Core Pallet Cleaner
CCL Spiroll..................................................661
Elematic Inc................................................842
Hollow Core Saws
CCL Spiroll..................................................661
Elematic Inc................................................842
ERMC......................................................... 616
Hollow Core Tarp
CCL Spiroll..................................................661
Elematic Inc................................................842
BUYER’S GUIDE
Management Tools & Other
Services
CNA/CKC....................................................284
Elematic Inc................................................842
STACK-IT Inc...............................................447
Titan II Precast Management System........670
Appraisal Services
iwi group LLC.............................................424
Computer Software - Take Off/Production
Inventory
Bentley Systems.........................................431
Command Alkon.........................................647
Delta Engineers, Architects & Land Surveyors.
.............................................................. 774
Elematic Inc................................................842
Eriksson Technologies Inc...........................978
FBE Associates Inc.....................................335
PTAC/Edge^Revit....................................... 149
STACK-IT Inc...............................................447
StructureWorks LLC................................... 744
Trimble........................................................349
Credit Card Processing
BASYS Processing......................................224
Decorative Apparel
G & K Uniform Services............Precast Village
Employee Timekeeping Software
TimeClock Plus...........................................843
Employment Services
ConcreteCareers.com.................................566
United Employment Group CONCRETEJOBS.COM........................1012
Engineering Services
Automacad Inc............................................558
B.S. Italia.....................................................831
BMH Systems............................................869
.............................................................. 774
DeVita & Associates Inc.............................578
Egan Company......................................... 1008
Eriksson Technologies Inc...........................978
Helix Steel..................................................738
Meadow Burke...........................................636
PTAC/Edge^Revit....................................... 149
Ratec LLC...................................................649
TEG Engineering LLC.................................358
W.P. Hilts & Company.................................654
Equipment Maintenance & Repair
Automacad Inc............................................558
BMH Systems............................................869
CCL Spiroll..................................................661
Egan Company......................................... 1008
W.P. Hilts & Company.................................654
Ratec LLC...................................................649
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Plant Relocation Services
Automacad Inc............................................558
Ratec LLC...................................................649
W.P. Hilts & Company.................................654
Publications
BFT International - Concrete Plant & Precast
Technology...........................Precast Village
Concrete Products.....................Precast Village
CPI - Concrete Plant International...............342
Fleet Management
Command Alkon.........................................647
Hyster Company.........................................870
Quality Control Software
ACR Systems Inc........................................382
Bentley Systems.........................................431
Trimble........................................................349
Insurance
CNA/CKC....................................................284
RFID Systems
Automacad Inc............................................558
Command Alkon.........................................647
Diamondback Spacers LLC.........................485
Egan Company......................................... 1008
Mi-Jack Products........................................ 716
Trimble........................................................349
Inventory Control Systems
Automacad Inc............................................558
Command Alkon.........................................647
Mi-Jack Products........................................ 716
PTAC/Edge^Revit....................................... 149
Scale-Tron Inc........................................... 1032
Plant Design Services
A.C.E. Structures........................................982
Automacad Inc............................................558
BMH Systems............................................869
CCL Spiroll..................................................661
Elematic Inc................................................842
iwi group LLC.............................................424
Mi-Jack Products........................................ 716
Shipping Services
Technical Managerial Consulting
Command Alkon.........................................647
.............................................................. 774
DeVita & Associates Inc.............................578
Elematic Inc................................................842
iwi group LLC.............................................424
STACK-IT Inc...............................................447
BUYER’S GUIDE
Other Management Tools
BASYS Processing......................................224
Betonvereniging (Dutch Concrete Society).......
.............................................Precast Village
Command Alkon.........................................647
Elematic Inc................................................842
PTAC/Edge^Revit....................................... 149
Trimble........................................................349
Material Handling
A.L. Patterson Inc.......................................856
Blackthorn LLC...........................................354
Control Chief Corporation......................... 1215
Doosan Industrial Vehicle America Corp... 1155
Elematic Inc................................................842
EMH Inc......................................................234
Hiab USA Inc.............................................. 132
Hyster Company.........................................870
Kalmar USA Inc........................................... 112
Kenco Corp............................................... 1070
Mi-Jack Products........................................ 716
Taylor Machine Works Inc........................... 122
Transflo..................................................... 1087
Concrete Buckets
A.L. Patterson Inc.......................................856
Blackthorn LLC...........................................354
BMH Systems............................................869
Elematic Inc................................................842
ERMC......................................................... 616
Gar-Bro Manufacturing Co..........................863
iwi group LLC.............................................424
Kenco Corp............................................... 1070
MCT Group Inc......................................... 1038
MOLDTECH.............................................. 1056
Ratec LLC...................................................649
Strike Products........................................... 815
Concrete Carts
BMH Systems............................................869
Elematic Inc................................................842
MCT Group Inc......................................... 1038
Ratec LLC...................................................649
Conveyor Systems
Automacad Inc............................................558
Bi-State Rubber..........................................365
BMH Systems............................................869
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
Transflo..................................................... 1087
W.P. Hilts & Company.................................654
Cranes & Boom Trucks
Blackthorn LLC...........................................354
Elematic Inc................................................842
EMH Inc......................................................234
Gantry Crane Trading LLC...........................242
Hiab USA Inc.............................................. 132
Mi-Jack Products........................................ 716
Shuttlelift.................................................... 813
Excavators
Kenco Corp............................................... 1070
Forklifts
Cat Lift Trucks.............................................. 144
Combilift USA.............................................586
Control Chief Corporation......................... 1215
Hiab USA Inc.............................................. 132
Hoist Liftruck Mfg. Inc................................ 918
Hyster Company.........................................870
iwi group LLC.............................................424
Kalmar USA Inc........................................... 112
KION North America Corporation............... 178
Konecranes Lift Trucks.............................. 1227
Lifting Products
A.L. Patterson Inc.......................................856
Automacad Inc............................................558
B.S. Italia.....................................................831
Besser Company........................................306
CMC/MMI...................................................861
D & L Supply Co. Inc..................................232
Duff-Norton................................................. 216
Elematic Inc................................................842
EMH Inc......................................................234
ERMC......................................................... 616
Hamilton Kent............................................. 748
Hiab USA Inc.............................................. 132
Hyster Company.........................................870
BUYER’S GUIDE
Kalmar USA Inc........................................... 112
Kenco Corp............................................... 1070
KION North America Corporation............... 178
Meadow Burke...........................................636
Midspec Inc................................................685
Mi-Jack Products........................................ 716
Polylok Inc...................................................404
Shuttlelift.................................................... 813
Strike Products........................................... 815
Teksam.......................................................885
Vacuworx.................................................. 1168
Wheel Loaders
Kenco Corp............................................... 1070
Other Material Handling
A.C.E. Structures........................................982
Automacad Inc............................................558
Blackthorn LLC...........................................354
BMH Systems............................................869
Elematic Inc................................................842
Hiab USA Inc.............................................. 132
Hyster Company.........................................870
Kenco Corp............................................... 1070
Meadow Burke...........................................636
Mi-Jack Products........................................ 716
Shuttlelift.................................................... 813
Steam Engineering.....................................339
Transflo..................................................... 1087
Used Material Handling Equipment
Gantry Crane Trading LLC...........................242
Hiab USA Inc.............................................. 132
iwi group LLC.............................................424
Konecranes Lift Trucks.............................. 1227
Mi-Jack Products........................................ 716
Plant Equipment
A.L. Patterson Inc.......................................856
Blackthorn LLC...........................................354
Elematic Inc................................................842
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
Transflo..................................................... 1087
Aggregate Heating and Cooling
Chameleon Innovations.............................. 760
Automated Production Equipment
A.L. Patterson Inc.......................................856
Automacad Inc............................................558
Cemen Tech Inc........................................ 1167
Command Alkon.........................................647
Egan Company......................................... 1008
Elematic Inc................................................842
ERMC......................................................... 616
Johnson Gas Appliance Company..............736
Ratec LLC...................................................649
Teksam.......................................................885
Block Plants
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
Rod Chomper Inc........................................471
W.P. Hilts & Company.................................654
Concrete/Masonry Saws
Blackthorn LLC...........................................354
Concrete Reclaiming/Recycling
Scale-Tron Inc........................................... 1032
Concrete Testing Equipment
A.L. Patterson Inc.......................................856
ACR Systems Inc........................................382
BUYER’S GUIDE
Blackthorn LLC...........................................354
iwi group LLC.............................................424
Curing Blankets
A.C.E. Structures........................................982
A.L. Patterson Inc.......................................856
CMC/MMI...................................................861
iwi group LLC.............................................424
Curing Systems
A.C.E. Structures........................................982
A.L. Patterson Inc.......................................856
ACR Systems Inc........................................382
Besser Company........................................306
CMC/MMI...................................................861
Elematic Inc................................................842
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
Diamond Cutting Products
CMC/MMI...................................................861
Drilling/Coring Machinery
Blackthorn LLC...........................................354
ERMC......................................................... 616
Teksam.......................................................885
Dry-Cast Equipment
Automacad Inc............................................558
Besser Company........................................306
C.G.M. Srl...................................................481
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
Teksam.......................................................885
Dust Control Equipment
A.C.E. Structures........................................982
AIRMATIC Inc.............................................948
Besser Company........................................306
BMH Systems............................................869
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Elevators
BMH Systems............................................869
MCT Group Inc......................................... 1038
W.P. Hilts & Company.................................654
Finishing Machines
Kem-O-Kleen............................................ 1203
Maema srl Unipersonale........................... 1050
Hydraulic Products
Elematic Inc................................................842
Paul Jacks USA LLC.................................. 1028
Rod Chomper Inc........................................471
Ladders
Blackthorn LLC...........................................354
BMH Systems............................................869
MCT Group Inc......................................... 1038
Lintel Machinery
Elematic Inc................................................842
Machine Maintenance Supplies
Elematic Inc................................................842
Measurement Equipment
Blackthorn LLC...........................................354
Hamilton Kent............................................. 748
LAP Laser LLC............................................582
Moisture Probes
BMH Systems............................................869
Command Alkon.........................................647
Egan Company......................................... 1008
Elematic Inc................................................842
ERMC......................................................... 616
Hydronix Ltd...............................................572
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
BUYER’S GUIDE
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Overhead Delivery Systems
Elematic Inc................................................842
MCT Group Inc......................................... 1038
Shuttlelift.................................................... 813
Pallets
Blackthorn LLC...........................................354
Elematic Inc................................................842
iwi group LLC.............................................424
Ratec LLC...................................................649
Western Forms...........................................849
Paving Products Machinery
A.L. Patterson Inc.......................................856
Automacad Inc............................................558
iwi group LLC.............................................424
Portable Cutters & Benders
Blackthorn LLC...........................................354
BN Products - USA................................... 1201
Gensco Equipment (1990) Inc....................244
iwi group LLC.............................................424
MAX USA Corp........................................... 147
Rod Chomper Inc........................................471
Schnell S.p.A............................................. 1040
Portable Infra-Red Heaters
Kem-O-Kleen............................................ 1203
Post-tensioning Jacks
CCL Spiroll..................................................661
Duff-Norton................................................. 216
Power Tools
AIRMATIC Inc.............................................948
BN Products - USA................................... 1201
MAX USA Corp........................................... 147
Millner-Haufen Tool Company................... 1068
Rod Chomper Inc........................................471
Prestress Jacks
CCL Spiroll..................................................661
Duff-Norton................................................. 216
Meadow Burke...........................................636
Scales
Blackthorn LLC...........................................354
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
W.P. Hilts & Company.................................654
Shearlines
CAM Sales Inc............................................305
Rebar Machine Sales Inc............................333
Rod Chomper Inc........................................471
Schnell S.p.A............................................. 1040
Shock/Vibration/Impact Control Devices
Shop Supplies
AIRMATIC Inc.............................................948
CMC/MMI...................................................861
Sign/Stencil Machine
Blackthorn LLC...........................................354
BREN Inc....................................................226
Diagraph MSP an ITW Company.............. 1080
Silos
BMH Systems............................................869
Cemen Tech Inc........................................ 1167
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
Transflo..................................................... 1087
W.P. Hilts & Company.................................654
Specialty Tools
ACR Systems Inc........................................382
Automacad Inc............................................558
BN Products - USA................................... 1201
Duff-Norton................................................. 216
LAP Laser LLC............................................582
MAX USA Corp........................................... 147
RoMix Inc...................................................379
BUYER’S GUIDE
Sprayers
A.L. Patterson Inc.......................................856
Automacad Inc............................................558
CMC/MMI...................................................861
Kem-O-Kleen............................................ 1203
RoMix Inc...................................................379
Stationary Cutters & Benders
Automacad Inc............................................558
Blackthorn LLC...........................................354
CAM Sales Inc............................................305
ERMC......................................................... 616
iwi group LLC.............................................424
Rod Chomper Inc........................................471
Stencil Inks/Plant Markerss
Diagraph MSP an ITW Company.............. 1080
Stirrup Benders
CAM Sales Inc............................................305
Rod Chomper Inc........................................471
Schnell S.p.A............................................. 1040
Straightening and Cutting Machines
BN Products - USA................................... 1201
CAM Sales Inc............................................305
iwi group LLC.............................................424
Rod Chomper Inc........................................471
Schnell S.p.A............................................. 1040
Tilt-up Equipment
Automacad Inc............................................558
ERMC......................................................... 616
Ratec LLC...................................................649
Vibrating Tables
AIRMATIC Inc.............................................948
Automacad Inc............................................558
Besser Company........................................306
Blackthorn LLC...........................................354
Elematic Inc................................................842
ERMC......................................................... 616
iwi group LLC.............................................424
Ratec LLC...................................................649
Teksam.......................................................885
Vibrators - External
A.L. Patterson Inc.......................................856
AIRMATIC Inc.............................................948
Blackthorn LLC...........................................354
iwi group LLC.............................................424
W.P. Hilts & Company.................................654
Vibrators - Internal
A.L. Patterson Inc.......................................856
AIRMATIC Inc.............................................948
Blackthorn LLC...........................................354
iwi group LLC.............................................424
Northrock Industries Inc.............................363
W.P. Hilts & Company.................................654
Water Heaters
BMH Systems............................................869
W.P. Hilts & Company.................................654
Wire Mesh Resistance Welding Equipment
CAM Sales Inc............................................305
Southern Copper and Supply......................457
Other Plant Equipment
A.L. Patterson Inc.......................................856
Automacad Inc............................................558
BMH Systems............................................869
Command Alkon.........................................647
Elematic Inc................................................842
Hyster Company.........................................870
MCT Group Inc......................................... 1038
Scale-Tron Inc........................................... 1032
Shuttlelift.................................................... 813
W.P. Hilts & Company.................................654
Other Welding Equipment
A.C.E. Structures........................................982
CAM Sales Inc............................................305
Southern Copper and Supply......................457
BUYER’S GUIDE
Used Plant Equipment
iwi group LLC.............................................424
Fabpro Polymers......................................... 766
FORTA Corporation.....................................643
solidian GmbH............................................580
Reinforcement
Fiberglass Reinforcing Bars
Adelphia Metals LLC................................ 1082
solidian GmbH............................................580
A.L. Patterson Inc.......................................856
ABC Polymer Industries LLC......................839
B.S. Italia.....................................................831
Bekaert Corp...............................................270
Fabpro Polymers......................................... 766
FORTA Corporation.....................................643
Numesh Inc................................................360
Schnell S.p.A............................................. 1040
solidian GmbH............................................580
Epoxy-Coated Strand & Rebar
CMC/MMI...................................................861
solidian GmbH............................................580
Sumiden Wire Products Corporation..........732
Fiber Reinforcement - Blended
A.L. Patterson Inc.......................................856
Bekaert Corp...............................................270
CHRYSO Inc...............................................681
Fabpro Polymers......................................... 766
solidian GmbH............................................580
Fiber Reinforcement - Steel
A.L. Patterson Inc.......................................856
Bekaert Corp...............................................270
Fabpro Polymers......................................... 766
Helix Steel..................................................738
Schnell S.p.A............................................. 1040
Fiber Reinforcement - Synthetic
A.L. Patterson Inc.......................................856
Bekaert Corp...............................................270
CHRYSO Inc...............................................681
Reinforcing Plastic Bar Connectors
CMC/MMI...................................................861
iwi group LLC.............................................424
Polylok Inc...................................................404
solidian GmbH............................................580
Steel Reinforcing Bars
Bekaert Corp...............................................270
CAM Sales Inc............................................305
CMC/MMI...................................................861
Engineered Wire Products..........................673
Helix Steel..................................................738
King Steel Corporation................................250
Laurel Steel.................................................542
Meadow Burke...........................................636
Numesh Inc................................................360
Pentair.......................................................1074
Rod Chomper Inc........................................471
Strand
Bekaert Corp...............................................270
Insteel Wire Products.................................884
Sumiden Wire Products Corporation..........732
Welded Wire Reinforcement
A.L. Patterson Inc.......................................856
Bekaert Corp...............................................270
CAM Sales Inc............................................305
CMC/MMI...................................................861
Davis Wire Corporation...............................857
ERMC......................................................... 616
Helix Steel..................................................738
Laurel Steel.................................................542
National Wire LLC.......................................786
Numesh Inc................................................360
Oklahoma Steel & Wire..............................323
Schnell S.p.A............................................. 1040
Wire Mesh Corp.........................................584
Wire Reinforcement
Bekaert Corp...............................................270
CAM Sales Inc............................................305
CMC/MMI...................................................861
ERMC......................................................... 616
Helix Steel..................................................738
Laurel Steel.................................................542
MAX USA Corp........................................... 147
Numesh Inc................................................360
Polylok Inc...................................................404
Schnell S.p.A............................................. 1040
Other Reinforcement
A.L. Patterson Inc.......................................856
Bekaert Corp...............................................270
CAM Sales Inc............................................305
CMC/MMI...................................................861
Headed Reinforcement Corp. (HRC)...........986
Helix Steel..................................................738
Laurel Steel.................................................542
MAX USA Corp........................................... 147
Meadow Burke...........................................636
Numesh Inc................................................360
Pentair.......................................................1074
Polylok Inc...................................................404
Schnell S.p.A............................................. 1040
solidian GmbH............................................580
Splice Sleeve North America Inc................855
BUYER’S GUIDE
Safety Equipment
A.L. Patterson Inc.......................................856
B.S. Italia.....................................................831
Blackthorn LLC...........................................354
Cabinets, Cans, Drums
Blackthorn LLC...........................................354
Clothing
RoMix Inc...................................................379
Eye & Face Protection
CMC/MMI...................................................861
RoMix Inc...................................................379
First Aid
CMC/MMI...................................................861
RoMix Inc...................................................379
Hearing & Head Protection
AIRMATIC Inc.............................................948
CMC/MMI...................................................861
RoMix Inc...................................................379
Respiratory Protection
CMC/MMI...................................................861
RoMix Inc...................................................379
Safety Programs
OVERTON Safety Training Inc.....................240
Other Safety Equipment
A.C.E. Structures........................................982
iwi group LLC.............................................424
Systems
B.S. Italia.....................................................831
Kistner Concrete/Environment 21..............835
Energy Management
ACR Systems Inc........................................382
Stormwater Treatment
CrystalStream Technologies........................336
Kistner Concrete/Environment 21..............835
Sustainable Building Products
EJ ..............................................................442
Hamilton Kent............................................. 748
Thermomass...............................................734
Water Recycling Systems
MCT Group Inc......................................... 1038
Water Treatment Solutions.........................384
Wastewater Treatment
Jet Inc......................................................... 762
Norweco Inc...............................................346
Other Systems
Kem-O-Kleen............................................ 1203
Pentair.......................................................1074
Redi-Rock....................................................546
Testing Services
Polylok Inc...................................................404
Watertightness Testing Services
Other Testing Services
Veneer
Thin Brick
A.L. Patterson Inc.......................................856
Endicott Thin Brick & Tile LLC.....................372
Summitville Tiles & Thin Brick................... 1151
Watsontown Brick Co............................... 1085
Precast Products
Agricultural Products
Bunker Silos
Tricon Precast Ltd.......................................960
Building and Site Amenities
Antiterrorism Building and Site Amenities
Architectural Products
Wausau Tile Inc...........................................435
Concrete Test Cylinder Molds
A.L. Patterson Inc.......................................856
Blackthorn LLC...........................................354
CMC/MMI...................................................861
Basement Entrances
VanHooseCo Precast.................................. 161
Vacuum Products
Automacad Inc............................................558
Blackthorn LLC...........................................354
Countertops/Sinks
Wausau Tile Inc...........................................435
Basement Walls/Foundation Systems
Benches
Wausau Tile Inc...........................................435
Commercial Stair Systems
BUYER’S GUIDE
Curb Stops, Parking Blocks & Bumpers
Wausau Tile Inc...........................................435
Custom Concrete Products
Wausau Tile Inc...........................................435
Fencing
Landscape Products
Soil Retention Products Inc........................332
Wausau Tile Inc...........................................435
Modular Buildings
Modular Restrooms and Vault Toilets
Ornamental Concrete Products
Architectural Concrete Casting Inc........... 1217
Wausau Tile Inc...........................................435
Patio/Picnic Tables
Wausau Tile Inc...........................................435
Planters
Wausau Tile Inc...........................................435
Safe Rooms
Screen Walls
Trash Receptacles
Wausau Tile Inc...........................................435
Tree Grates, Rings
Wausau Tile Inc...........................................435
Veneer Products
Wall Panels - Non-Structural
Wausau Tile Inc...........................................435
Wall Panels - Structural
Hazardous Materials
Containment
Other Hazardous Material Containment
Bulk Heads
Other Marine Products
Modular Paving
Mechanically Stabilized Earth (MSE) Panels
Residential Retaining Walls
Sea Walls
Segmental Retaining Wall (SRW) Products
Other Retaining Walls
Sanitary & Stormwater
Products
Catch Basins
Curb Inlets
Erosion Control Structures
Paving Stones
Wausau Tile Inc...........................................435
Headwalls/Wingwalls
Specialty Wall Structures
Other Modular Paving
Wausau Tile Inc...........................................435
Storm Shelters
Commercial Retaining Walls
Interlocking Pavers
Roof Slabs
Steps
Wausau Tile Inc...........................................435
Marine Products
Signs
Wausau Tile Inc...........................................435
Spill Containment Products
Retaining Walls
Prestressed/Structural
Products
Prestressed Bridge Beams
Risers
Manholes
Pervious Slabs
Pump/Lift Stations
Reinforced Concrete Pipe
Unreinforced Concrete Pipe
BUYER’S GUIDE
Stormwater Detention Structures
Railroad Crossings
Transformer Pads
Stormwater Treatment Structures
Short Span Bridges
Trenches
Trench Drain Products
Other Sanitary & Stormwater Products
Sound Walls/Barriers
Transportation Products
Traffic Barriers
3-Sided Culverts
Box Culverts
Bridge Systems
Other Transportation Products
Utility Buildings
Utility Vaults
Other Utility Structures
Water & Wastewater
Products
Utility Structures
Distribution Boxes
Controlled Environment Vaults (CEVs)
Sand-Oil/Oil-Water Interceptors
Junction Boxes
Wetwells
Pile Caps
ADVERTISERS INDEX
ADVERTISER
BOOTHPAGE
A.L. Patterson Inc..............................................856........................................2
Advanced Concrete Technologies Inc...........454......................................53
A-Lok Products Inc............................................536......................................55
BASF Corporation..............................................436......................................99
Chryso Inc...........................................................681........................................3
CNA Insurance...................................................284......................................56
CONAC, Concrete Accessories.......................800......................................47
Concrete Sealants Inc......................................418......................................10
ConShield Technologies...................................679......................................57
Delta Engineers, Architects &
Land Surveyors............................................774......................................51
EJ ........................................................................442......................................59
Elematic Inc........................................................842......................................61
EMH Inc...............................................................234......................................63
Euclid Chemical Co............................................665......................................65
FORTA Corp.........................................................643......................................53
Haarup North America Inc...............................116.........Inside Back Cover
Hamilton Form Company...................................430......................................67
HawkeyePedershaab........................................624......................................69
Hill and Griffith Co..............................................678......................................63
iwi group LLC......................................................424........................................8
J. McCoy Equipment Ltd...................................278......................................71
M.A. Industries Inc............................................825......................................71
New Hampton Metal Fab..................................706......................................73
Nox-Crete Products Group...............................162......................................75
Oklahoma/Iowa Steel & Wire Co....................323......................................77
Palfinger North America...................................468......................................79
Pennsylvania Insert Corp.................................317......................................75
Polylok Inc. ZABEL.............................................404....Front of Exhibitor Tab
Precise Forms Inc..............................................478......................................79
QMC Hydraulic Cranes...................................1205......................................85
Robert Ober & Associates LLC........................836......................................81
Sicoma North America Inc...............................936......................................83
Sioux Corporation..............................................313...... Outside Back Cover
Slab Innovation Inc............................................166......................................87
Spillman Company.............................................604..........................................
........................................................................Back of Buyer’S Guide Tab
Standley Batch Systems Inc............................814......................................89
Strong Products LLC..........................................906......................................91
Sylvan Concrete Form Products......................338......................................93
Taylor Machine Works Inc...............................122......................................97
Thermomass.......................................................734......................................95
Titan II Precast Management System............670........................................4
Tucker’s Machine & Steel Service Inc...........412....................................121
U.S. Foundry & Mfg. Corp./
U.S.F. Fabrication Inc...................................610....................................122
W.P. Hilts & Company........................................654..........................................
.........................................................................Front of Buyer’s Guide Tab
Wieser Form Fabrication............................................Back of Exhibitor Tab
BUYER’S GUIDE
BOOTH 412
BUYER’S GUIDE
BOOTH 610
BOOTH 116
BOOTH 313

the 2016 guide - National Precast Concrete Association

Transcription

Similar documents

Precast Concrete Spotlight

You`ve Got the Power! - Ethos Education Group

the program brochure

The GOMACO Full Line Brochure

Installation Instructions

2007 Fall Conference Attendee Brochure 9

NatioNal Heritage Corridor

PDF of project data sheet.

Annonce S1

papa-johns-gift-card-form copy

FPM55 - SANUS - SANUS VuePoint